Files
linux/arch/loongarch/include/asm/stackframe.h
Tiezhu Yang cb8a2ef084 LoongArch: Add ORC stack unwinder support
The kernel CONFIG_UNWINDER_ORC option enables the ORC unwinder, which is
similar in concept to a DWARF unwinder. The difference is that the format
of the ORC data is much simpler than DWARF, which in turn allows the ORC
unwinder to be much simpler and faster.

The ORC data consists of unwind tables which are generated by objtool.
After analyzing all the code paths of a .o file, it determines information
about the stack state at each instruction address in the file and outputs
that information to the .orc_unwind and .orc_unwind_ip sections.

The per-object ORC sections are combined at link time and are sorted and
post-processed at boot time. The unwinder uses the resulting data to
correlate instruction addresses with their stack states at run time.

Most of the logic are similar with x86, in order to get ra info before ra
is saved into stack, add ra_reg and ra_offset into orc_entry. At the same
time, modify some arch-specific code to silence the objtool warnings.

Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-11 22:23:47 +08:00

236 lines
5.0 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2020-2022 Loongson Technology Corporation Limited
*/
#ifndef _ASM_STACKFRAME_H
#define _ASM_STACKFRAME_H
#include <linux/threads.h>
#include <asm/addrspace.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
#include <asm/asm-offsets.h>
#include <asm/loongarch.h>
#include <asm/thread_info.h>
#include <asm/unwind_hints.h>
/* Make the addition of cfi info a little easier. */
.macro cfi_rel_offset reg offset=0 docfi=0
.if \docfi
.cfi_rel_offset \reg, \offset
.endif
.endm
.macro cfi_st reg offset=0 docfi=0
cfi_rel_offset \reg, \offset, \docfi
LONG_S \reg, sp, \offset
.endm
.macro cfi_restore reg offset=0 docfi=0
.if \docfi
.cfi_restore \reg
.endif
.endm
.macro cfi_ld reg offset=0 docfi=0
LONG_L \reg, sp, \offset
cfi_restore \reg \offset \docfi
.endm
/* Jump to the runtime virtual address. */
.macro JUMP_VIRT_ADDR temp1 temp2
li.d \temp1, CACHE_BASE
pcaddi \temp2, 0
or \temp1, \temp1, \temp2
jirl zero, \temp1, 0xc
.endm
.macro BACKUP_T0T1
csrwr t0, EXCEPTION_KS0
csrwr t1, EXCEPTION_KS1
.endm
.macro RELOAD_T0T1
csrrd t0, EXCEPTION_KS0
csrrd t1, EXCEPTION_KS1
.endm
.macro SAVE_TEMP docfi=0
RELOAD_T0T1
cfi_st t0, PT_R12, \docfi
cfi_st t1, PT_R13, \docfi
cfi_st t2, PT_R14, \docfi
cfi_st t3, PT_R15, \docfi
cfi_st t4, PT_R16, \docfi
cfi_st t5, PT_R17, \docfi
cfi_st t6, PT_R18, \docfi
cfi_st t7, PT_R19, \docfi
cfi_st t8, PT_R20, \docfi
.endm
.macro SAVE_STATIC docfi=0
cfi_st s0, PT_R23, \docfi
cfi_st s1, PT_R24, \docfi
cfi_st s2, PT_R25, \docfi
cfi_st s3, PT_R26, \docfi
cfi_st s4, PT_R27, \docfi
cfi_st s5, PT_R28, \docfi
cfi_st s6, PT_R29, \docfi
cfi_st s7, PT_R30, \docfi
cfi_st s8, PT_R31, \docfi
.endm
/*
* get_saved_sp returns the SP for the current CPU by looking in the
* kernelsp array for it. It stores the current sp in t0 and loads the
* new value in sp.
*/
.macro get_saved_sp docfi=0
la_abs t1, kernelsp
#ifdef CONFIG_SMP
csrrd t0, PERCPU_BASE_KS
LONG_ADD t1, t1, t0
#endif
move t0, sp
.if \docfi
.cfi_register sp, t0
.endif
LONG_L sp, t1, 0
.endm
.macro set_saved_sp stackp temp temp2
la.pcrel \temp, kernelsp
#ifdef CONFIG_SMP
LONG_ADD \temp, \temp, u0
#endif
LONG_S \stackp, \temp, 0
.endm
.macro SAVE_SOME docfi=0
csrrd t1, LOONGARCH_CSR_PRMD
andi t1, t1, 0x3 /* extract pplv bit */
move t0, sp
beqz t1, 8f
/* Called from user mode, new stack. */
get_saved_sp docfi=\docfi
8:
PTR_ADDI sp, sp, -PT_SIZE
.if \docfi
.cfi_def_cfa sp, 0
.endif
cfi_st t0, PT_R3, \docfi
cfi_rel_offset sp, PT_R3, \docfi
LONG_S zero, sp, PT_R0
csrrd t0, LOONGARCH_CSR_PRMD
LONG_S t0, sp, PT_PRMD
csrrd t0, LOONGARCH_CSR_CRMD
LONG_S t0, sp, PT_CRMD
csrrd t0, LOONGARCH_CSR_EUEN
LONG_S t0, sp, PT_EUEN
csrrd t0, LOONGARCH_CSR_ECFG
LONG_S t0, sp, PT_ECFG
csrrd t0, LOONGARCH_CSR_ESTAT
PTR_S t0, sp, PT_ESTAT
cfi_st ra, PT_R1, \docfi
cfi_st a0, PT_R4, \docfi
cfi_st a1, PT_R5, \docfi
cfi_st a2, PT_R6, \docfi
cfi_st a3, PT_R7, \docfi
cfi_st a4, PT_R8, \docfi
cfi_st a5, PT_R9, \docfi
cfi_st a6, PT_R10, \docfi
cfi_st a7, PT_R11, \docfi
csrrd ra, LOONGARCH_CSR_ERA
LONG_S ra, sp, PT_ERA
.if \docfi
.cfi_rel_offset ra, PT_ERA
.endif
cfi_st tp, PT_R2, \docfi
cfi_st fp, PT_R22, \docfi
/* Set thread_info if we're coming from user mode */
csrrd t0, LOONGARCH_CSR_PRMD
andi t0, t0, 0x3 /* extract pplv bit */
beqz t0, 9f
li.d tp, ~_THREAD_MASK
and tp, tp, sp
cfi_st u0, PT_R21, \docfi
csrrd u0, PERCPU_BASE_KS
9:
#ifdef CONFIG_KGDB
li.w t0, CSR_CRMD_WE
csrxchg t0, t0, LOONGARCH_CSR_CRMD
#endif
UNWIND_HINT_REGS
.endm
.macro SAVE_ALL docfi=0
SAVE_SOME \docfi
SAVE_TEMP \docfi
SAVE_STATIC \docfi
.endm
.macro RESTORE_TEMP docfi=0
cfi_ld t0, PT_R12, \docfi
cfi_ld t1, PT_R13, \docfi
cfi_ld t2, PT_R14, \docfi
cfi_ld t3, PT_R15, \docfi
cfi_ld t4, PT_R16, \docfi
cfi_ld t5, PT_R17, \docfi
cfi_ld t6, PT_R18, \docfi
cfi_ld t7, PT_R19, \docfi
cfi_ld t8, PT_R20, \docfi
.endm
.macro RESTORE_STATIC docfi=0
cfi_ld s0, PT_R23, \docfi
cfi_ld s1, PT_R24, \docfi
cfi_ld s2, PT_R25, \docfi
cfi_ld s3, PT_R26, \docfi
cfi_ld s4, PT_R27, \docfi
cfi_ld s5, PT_R28, \docfi
cfi_ld s6, PT_R29, \docfi
cfi_ld s7, PT_R30, \docfi
cfi_ld s8, PT_R31, \docfi
.endm
.macro RESTORE_SOME docfi=0
LONG_L a0, sp, PT_PRMD
andi a0, a0, 0x3 /* extract pplv bit */
beqz a0, 8f
cfi_ld u0, PT_R21, \docfi
8:
LONG_L a0, sp, PT_ERA
csrwr a0, LOONGARCH_CSR_ERA
LONG_L a0, sp, PT_PRMD
csrwr a0, LOONGARCH_CSR_PRMD
cfi_ld ra, PT_R1, \docfi
cfi_ld a0, PT_R4, \docfi
cfi_ld a1, PT_R5, \docfi
cfi_ld a2, PT_R6, \docfi
cfi_ld a3, PT_R7, \docfi
cfi_ld a4, PT_R8, \docfi
cfi_ld a5, PT_R9, \docfi
cfi_ld a6, PT_R10, \docfi
cfi_ld a7, PT_R11, \docfi
cfi_ld tp, PT_R2, \docfi
cfi_ld fp, PT_R22, \docfi
.endm
.macro RESTORE_SP_AND_RET docfi=0
cfi_ld sp, PT_R3, \docfi
UNWIND_HINT_FUNC
ertn
.endm
.macro RESTORE_ALL_AND_RET docfi=0
RESTORE_STATIC \docfi
RESTORE_TEMP \docfi
RESTORE_SOME \docfi
RESTORE_SP_AND_RET \docfi
.endm
#endif /* _ASM_STACKFRAME_H */