Files
linux/arch/arm64/include/asm/ftrace.h
Florent Revest 2aa6ac0351 arm64: ftrace: Add direct call support
This builds up on the CALL_OPS work which extends the ftrace patchsite
on arm64 with an ops pointer usable by the ftrace trampoline.

This ops pointer is valid at all time. Indeed, it is either pointing to
ftrace_list_ops or to the single ops which should be called from that
patchsite.

There are a few cases to distinguish:
- If a direct call ops is the only one tracing a function:
  - If the direct called trampoline is within the reach of a BL
    instruction
     -> the ftrace patchsite jumps to the trampoline
  - Else
     -> the ftrace patchsite jumps to the ftrace_caller trampoline which
        reads the ops pointer in the patchsite and jumps to the direct
        call address stored in the ops
- Else
  -> the ftrace patchsite jumps to the ftrace_caller trampoline and its
     ops literal points to ftrace_list_ops so it iterates over all
     registered ftrace ops, including the direct call ops and calls its
     call_direct_funcs handler which stores the direct called
     trampoline's address in the ftrace_regs and the ftrace_caller
     trampoline will return to that address instead of returning to the
     traced function

Signed-off-by: Florent Revest <revest@chromium.org>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230405180250.2046566-2-revest@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
2023-04-11 18:06:39 +01:00

196 lines
4.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm64/include/asm/ftrace.h
*
* Copyright (C) 2013 Linaro Limited
* Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
*/
#ifndef __ASM_FTRACE_H
#define __ASM_FTRACE_H
#include <asm/insn.h>
#define HAVE_FUNCTION_GRAPH_FP_TEST
/*
* HAVE_FUNCTION_GRAPH_RET_ADDR_PTR means that the architecture can provide a
* "return address pointer" which can be used to uniquely identify a return
* address which has been overwritten.
*
* On arm64 we use the address of the caller's frame record, which remains the
* same for the lifetime of the instrumented function, unlike the return
* address in the LR.
*/
#define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
#define ARCH_SUPPORTS_FTRACE_OPS 1
#else
#define MCOUNT_ADDR ((unsigned long)_mcount)
#endif
/* The BL at the callsite's adjusted rec->ip */
#define MCOUNT_INSN_SIZE AARCH64_INSN_SIZE
#define FTRACE_PLT_IDX 0
#define NR_FTRACE_PLTS 1
/*
* Currently, gcc tends to save the link register after the local variables
* on the stack. This causes the max stack tracer to report the function
* frame sizes for the wrong functions. By defining
* ARCH_FTRACE_SHIFT_STACK_TRACER, it will tell the stack tracer to expect
* to find the return address on the stack after the local variables have
* been set up.
*
* Note, this may change in the future, and we will need to deal with that
* if it were to happen.
*/
#define ARCH_FTRACE_SHIFT_STACK_TRACER 1
#ifndef __ASSEMBLY__
#include <linux/compat.h>
extern void _mcount(unsigned long);
extern void *return_address(unsigned int);
struct dyn_arch_ftrace {
/* No extra data needed for arm64 */
};
extern unsigned long ftrace_graph_call;
extern void return_to_handler(void);
unsigned long ftrace_call_adjust(unsigned long addr);
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
struct dyn_ftrace;
struct ftrace_ops;
#define arch_ftrace_get_regs(regs) NULL
/*
* Note: sizeof(struct ftrace_regs) must be a multiple of 16 to ensure correct
* stack alignment
*/
struct ftrace_regs {
/* x0 - x8 */
unsigned long regs[9];
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
unsigned long direct_tramp;
#else
unsigned long __unused;
#endif
unsigned long fp;
unsigned long lr;
unsigned long sp;
unsigned long pc;
};
static __always_inline unsigned long
ftrace_regs_get_instruction_pointer(const struct ftrace_regs *fregs)
{
return fregs->pc;
}
static __always_inline void
ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs,
unsigned long pc)
{
fregs->pc = pc;
}
static __always_inline unsigned long
ftrace_regs_get_stack_pointer(const struct ftrace_regs *fregs)
{
return fregs->sp;
}
static __always_inline unsigned long
ftrace_regs_get_argument(struct ftrace_regs *fregs, unsigned int n)
{
if (n < 8)
return fregs->regs[n];
return 0;
}
static __always_inline unsigned long
ftrace_regs_get_return_value(const struct ftrace_regs *fregs)
{
return fregs->regs[0];
}
static __always_inline void
ftrace_regs_set_return_value(struct ftrace_regs *fregs,
unsigned long ret)
{
fregs->regs[0] = ret;
}
static __always_inline void
ftrace_override_function_with_return(struct ftrace_regs *fregs)
{
fregs->pc = fregs->lr;
}
int ftrace_regs_query_register_offset(const char *name);
int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
#define ftrace_init_nop ftrace_init_nop
void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct ftrace_regs *fregs);
#define ftrace_graph_func ftrace_graph_func
#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
static inline void arch_ftrace_set_direct_caller(struct ftrace_regs *fregs,
unsigned long addr)
{
/*
* The ftrace trampoline will return to this address instead of the
* instrumented function.
*/
fregs->direct_tramp = addr;
}
#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
#endif
#define ftrace_return_address(n) return_address(n)
/*
* Because AArch32 mode does not share the same syscall table with AArch64,
* tracing compat syscalls may result in reporting bogus syscalls or even
* hang-up, so just do not trace them.
* See kernel/trace/trace_syscalls.c
*
* x86 code says:
* If the user really wants these, then they should use the
* raw syscall tracepoints with filtering.
*/
#define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS
static inline bool arch_trace_is_compat_syscall(struct pt_regs *regs)
{
return is_compat_task();
}
#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
static inline bool arch_syscall_match_sym_name(const char *sym,
const char *name)
{
/*
* Since all syscall functions have __arm64_ prefix, we must skip it.
* However, as we described above, we decided to ignore compat
* syscalls, so we don't care about __arm64_compat_ prefix here.
*/
return !strcmp(sym + 8, name);
}
#endif /* ifndef __ASSEMBLY__ */
#endif /* __ASM_FTRACE_H */