mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-08-29 13:57:58 -04:00
Code Issues Packages Projects Releases Wiki Activity
Files
185a4caeecabc150106deda1da170b09f2ad803f
linux/drivers/media/tuners/fc0011.c
Linus Torvalds bf4afc53b7 Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 17:09:51 -08:00

507 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Fitipower FC0011 tuner driver
*
* Copyright (C) 2012 Michael Buesch <m@bues.ch>
*
* Derived from FC0012 tuner driver:
* Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
*/
#include "fc0011.h"
/* Tuner registers */
enum {
FC11_REG_0,
FC11_REG_FA, /* FA */
FC11_REG_FP, /* FP */
FC11_REG_XINHI, /* XIN high 8 bit */
FC11_REG_XINLO, /* XIN low 8 bit */
FC11_REG_VCO, /* VCO */
FC11_REG_VCOSEL, /* VCO select */
FC11_REG_7, /* Unknown tuner reg 7 */
FC11_REG_8, /* Unknown tuner reg 8 */
FC11_REG_9,
FC11_REG_10, /* Unknown tuner reg 10 */
FC11_REG_11, /* Unknown tuner reg 11 */
FC11_REG_12,
FC11_REG_RCCAL, /* RC calibrate */
FC11_REG_VCOCAL, /* VCO calibrate */
FC11_REG_15,
FC11_REG_16, /* Unknown tuner reg 16 */
FC11_REG_17,
FC11_NR_REGS, /* Number of registers */
};
enum FC11_REG_VCOSEL_bits {
FC11_VCOSEL_2 = 0x08, /* VCO select 2 */
FC11_VCOSEL_1 = 0x10, /* VCO select 1 */
FC11_VCOSEL_CLKOUT = 0x20, /* Fix clock out */
FC11_VCOSEL_BW7M = 0x40, /* 7MHz bw */
FC11_VCOSEL_BW6M = 0x80, /* 6MHz bw */
};
enum FC11_REG_RCCAL_bits {
FC11_RCCAL_FORCE = 0x10, /* force */
};
enum FC11_REG_VCOCAL_bits {
FC11_VCOCAL_RUN = 0, /* VCO calibration run */
FC11_VCOCAL_VALUEMASK = 0x3F, /* VCO calibration value mask */
FC11_VCOCAL_OK = 0x40, /* VCO calibration Ok */
FC11_VCOCAL_RESET = 0x80, /* VCO calibration reset */
};
struct fc0011_priv {
struct i2c_adapter *i2c;
u8 addr;
u32 frequency;
u32 bandwidth;
};
static int fc0011_writereg(struct fc0011_priv *priv, u8 reg, u8 val)
{
u8 buf[2] = { reg, val };
struct i2c_msg msg = { .addr = priv->addr,
.flags = 0, .buf = buf, .len = 2 };
if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
dev_err(&priv->i2c->dev,
"I2C write reg failed, reg: %02x, val: %02x\n",
reg, val);
return -EIO;
}
return 0;
}
static int fc0011_readreg(struct fc0011_priv *priv, u8 reg, u8 *val)
{
u8 dummy;
struct i2c_msg msg[2] = {
{ .addr = priv->addr,
.flags = 0, .buf = &reg, .len = 1 },
{ .addr = priv->addr,
.flags = I2C_M_RD, .buf = val ? : &dummy, .len = 1 },
};
if (i2c_transfer(priv->i2c, msg, 2) != 2) {
dev_err(&priv->i2c->dev,
"I2C read failed, reg: %02x\n", reg);
return -EIO;
}
return 0;
}
static void fc0011_release(struct dvb_frontend *fe)
{
kfree(fe->tuner_priv);
fe->tuner_priv = NULL;
}
static int fc0011_init(struct dvb_frontend *fe)
{
struct fc0011_priv *priv = fe->tuner_priv;
int err;
if (WARN_ON(!fe->callback))
return -EINVAL;
err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
FC0011_FE_CALLBACK_POWER, priv->addr);
if (err) {
dev_err(&priv->i2c->dev, "Power-on callback failed\n");
return err;
}
err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
FC0011_FE_CALLBACK_RESET, priv->addr);
if (err) {
dev_err(&priv->i2c->dev, "Reset callback failed\n");
return err;
}
return 0;
}
/* Initiate VCO calibration */
static int fc0011_vcocal_trigger(struct fc0011_priv *priv)
{
int err;
err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RESET);
if (err)
return err;
err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
if (err)
return err;
return 0;
}
/* Read VCO calibration value */
static int fc0011_vcocal_read(struct fc0011_priv *priv, u8 *value)
{
int err;
err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
if (err)
return err;
usleep_range(10000, 20000);
err = fc0011_readreg(priv, FC11_REG_VCOCAL, value);
if (err)
return err;
return 0;
}
static int fc0011_set_params(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct fc0011_priv *priv = fe->tuner_priv;
int err;
unsigned int i, vco_retries;
u32 freq = p->frequency / 1000;
u32 bandwidth = p->bandwidth_hz / 1000;
u32 fvco, xin, frac, xdiv, xdivr;
u8 fa, fp, vco_sel, vco_cal;
u8 regs[FC11_NR_REGS] = { };
regs[FC11_REG_7] = 0x0F;
regs[FC11_REG_8] = 0x3E;
regs[FC11_REG_10] = 0xB8;
regs[FC11_REG_11] = 0x80;
regs[FC11_REG_RCCAL] = 0x04;
err = fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
if (err)
return -EIO;
/* Set VCO freq and VCO div */
if (freq < 54000) {
fvco = freq * 64;
regs[FC11_REG_VCO] = 0x82;
} else if (freq < 108000) {
fvco = freq * 32;
regs[FC11_REG_VCO] = 0x42;
} else if (freq < 216000) {
fvco = freq * 16;
regs[FC11_REG_VCO] = 0x22;
} else if (freq < 432000) {
fvco = freq * 8;
regs[FC11_REG_VCO] = 0x12;
} else {
fvco = freq * 4;
regs[FC11_REG_VCO] = 0x0A;
}
/* Calc XIN. The PLL reference frequency is 18 MHz. */
xdiv = fvco / 18000;
WARN_ON(xdiv > 0xFF);
frac = fvco - xdiv * 18000;
frac = (frac << 15) / 18000;
if (frac >= 16384)
frac += 32786;
if (!frac)
xin = 0;
else
xin = clamp_t(u32, frac, 512, 65024);
regs[FC11_REG_XINHI] = xin >> 8;
regs[FC11_REG_XINLO] = xin;
/* Calc FP and FA */
xdivr = xdiv;
if (fvco - xdiv * 18000 >= 9000)
xdivr += 1; /* round */
fp = xdivr / 8;
fa = xdivr - fp * 8;
if (fa < 2) {
fp -= 1;
fa += 8;
}
if (fp > 0x1F) {
fp = 0x1F;
fa = 0xF;
}
if (fa >= fp) {
dev_warn(&priv->i2c->dev,
"fa %02X >= fp %02X, but trying to continue\n",
(unsigned int)(u8)fa, (unsigned int)(u8)fp);
}
regs[FC11_REG_FA] = fa;
regs[FC11_REG_FP] = fp;
/* Select bandwidth */
switch (bandwidth) {
case 8000:
break;
case 7000:
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW7M;
break;
default:
dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. Using 6000 kHz.\n",
bandwidth);
bandwidth = 6000;
fallthrough;
case 6000:
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW6M;
break;
}
/* Pre VCO select */
if (fvco < 2320000) {
vco_sel = 0;
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
} else if (fvco < 3080000) {
vco_sel = 1;
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
} else {
vco_sel = 2;
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
}
/* Fix for low freqs */
if (freq < 45000) {
regs[FC11_REG_FA] = 0x6;
regs[FC11_REG_FP] = 0x11;
}
/* Clock out fix */
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_CLKOUT;
/* Write the cached registers */
for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++) {
err = fc0011_writereg(priv, i, regs[i]);
if (err)
return err;
}
/* VCO calibration */
err = fc0011_vcocal_trigger(priv);
if (err)
return err;
err = fc0011_vcocal_read(priv, &vco_cal);
if (err)
return err;
vco_retries = 0;
while (!(vco_cal & FC11_VCOCAL_OK) && vco_retries < 3) {
/* Reset the tuner and try again */
err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
FC0011_FE_CALLBACK_RESET, priv->addr);
if (err) {
dev_err(&priv->i2c->dev, "Failed to reset tuner\n");
return err;
}
/* Reinit tuner config */
err = 0;
for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++)
err |= fc0011_writereg(priv, i, regs[i]);
err |= fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
if (err)
return -EIO;
/* VCO calibration */
err = fc0011_vcocal_trigger(priv);
if (err)
return err;
err = fc0011_vcocal_read(priv, &vco_cal);
if (err)
return err;
vco_retries++;
}
if (!(vco_cal & FC11_VCOCAL_OK)) {
dev_err(&priv->i2c->dev,
"Failed to read VCO calibration value (got %02X)\n",
(unsigned int)vco_cal);
return -EIO;
}
vco_cal &= FC11_VCOCAL_VALUEMASK;
switch (vco_sel) {
default:
WARN_ON(1);
return -EINVAL;
case 0:
if (vco_cal < 8) {
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
regs[FC11_REG_VCOSEL]);
if (err)
return err;
err = fc0011_vcocal_trigger(priv);
if (err)
return err;
} else {
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
regs[FC11_REG_VCOSEL]);
if (err)
return err;
}
break;
case 1:
if (vco_cal < 5) {
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
regs[FC11_REG_VCOSEL]);
if (err)
return err;
err = fc0011_vcocal_trigger(priv);
if (err)
return err;
} else if (vco_cal <= 48) {
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
regs[FC11_REG_VCOSEL]);
if (err)
return err;
} else {
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
regs[FC11_REG_VCOSEL]);
if (err)
return err;
err = fc0011_vcocal_trigger(priv);
if (err)
return err;
}
break;
case 2:
if (vco_cal > 53) {
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
regs[FC11_REG_VCOSEL]);
if (err)
return err;
err = fc0011_vcocal_trigger(priv);
if (err)
return err;
} else {
regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
err = fc0011_writereg(priv, FC11_REG_VCOSEL,
regs[FC11_REG_VCOSEL]);
if (err)
return err;
}
break;
}
err = fc0011_vcocal_read(priv, NULL);
if (err)
return err;
usleep_range(10000, 50000);
err = fc0011_readreg(priv, FC11_REG_RCCAL, &regs[FC11_REG_RCCAL]);
if (err)
return err;
regs[FC11_REG_RCCAL] |= FC11_RCCAL_FORCE;
err = fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
if (err)
return err;
regs[FC11_REG_16] = 0xB;
err = fc0011_writereg(priv, FC11_REG_16, regs[FC11_REG_16]);
if (err)
return err;
dev_dbg(&priv->i2c->dev, "Tuned to fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X vcocal=%02X(%u) bw=%u\n",
(unsigned int)regs[FC11_REG_FA],
(unsigned int)regs[FC11_REG_FP],
(unsigned int)regs[FC11_REG_XINHI],
(unsigned int)regs[FC11_REG_XINLO],
(unsigned int)regs[FC11_REG_VCO],
(unsigned int)regs[FC11_REG_VCOSEL],
(unsigned int)vco_cal, vco_retries,
(unsigned int)bandwidth);
priv->frequency = p->frequency;
priv->bandwidth = p->bandwidth_hz;
return 0;
}
static int fc0011_get_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct fc0011_priv *priv = fe->tuner_priv;
*frequency = priv->frequency;
return 0;
}
static int fc0011_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
{
*frequency = 0;
return 0;
}
static int fc0011_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
{
struct fc0011_priv *priv = fe->tuner_priv;
*bandwidth = priv->bandwidth;
return 0;
}
static const struct dvb_tuner_ops fc0011_tuner_ops = {
.info = {
.name = "Fitipower FC0011",
.frequency_min_hz = 45 * MHz,
.frequency_max_hz = 1000 * MHz,
},
.release = fc0011_release,
.init = fc0011_init,
.set_params = fc0011_set_params,
.get_frequency = fc0011_get_frequency,
.get_if_frequency = fc0011_get_if_frequency,
.get_bandwidth = fc0011_get_bandwidth,
};
struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c,
const struct fc0011_config *config)
{
struct fc0011_priv *priv;
priv = kzalloc_obj(struct fc0011_priv);
if (!priv)
return NULL;
priv->i2c = i2c;
priv->addr = config->i2c_address;
fe->tuner_priv = priv;
fe->ops.tuner_ops = fc0011_tuner_ops;
dev_info(&priv->i2c->dev, "Fitipower FC0011 tuner attached\n");
return fe;
}
EXPORT_SYMBOL_GPL(fc0011_attach);
MODULE_DESCRIPTION("Fitipower FC0011 silicon tuner driver");
MODULE_AUTHOR("Michael Buesch <m@bues.ch>");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink