ERR051725:
USB: With the USB controller configured as device mode, Clearing the RS
bit of USBCMD register fails to cause USB device to be detached
Description
1. USB controller working as high speed device mode with USB gadget
function enabled
2. Cable plugged into USB host
3. Use case is software-controlled detach from USB device side
The expected result is device side terminations removed, increase in USB
signal amplitude, USB host detect device is detached. But the issue is
that the clear RS bit of USBCMD register cannot cause device detach event.
Workaround
- Use the below steps to detach from the host:
write USBCMD.RS = 0b
write CTRL2[7:6] = 01b
write CTRL2[8] = 1b
- As CTRL2[8] is set at detach case, so attach the steps should add clear
CTRL2[8]:
write USBCMD.RS = 1b
write CTRL2[8] = 0b
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250614125645.207732-4-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11992b4100