mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-12-27 10:01:39 -05:00
Commitfc96ec826b("spi: fsl-cpm: Use 16 bit mode for large transfers with even size") failed to make sure that the size is really even before switching to 16 bit mode. Until recently the problem went unnoticed because kernfs uses a pre-allocated bounce buffer of size PAGE_SIZE for reading EEPROM. But commit8ad6249c51("eeprom: at25: convert to spi-mem API") introduced an additional dynamically allocated bounce buffer whose size is exactly the size of the transfer, leading to a buffer overrun in the fsl-cpm driver when that size is odd. Add the missing length parity verification and remain in 8 bit mode when the length is not even. Fixes:fc96ec826b("spi: fsl-cpm: Use 16 bit mode for large transfers with even size") Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/638496dd-ec60-4e53-bad7-eb657f67d580@csgroup.eu/ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Sverdlin Alexander <alexander.sverdlin@siemens.com> Link: https://patch.msgid.link/3c4d81c3923c93f95ec56702a454744a4bad3cfc.1763627618.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown <broonie@kernel.org>
801 lines
20 KiB
C
801 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Freescale SPI controller driver.
|
|
*
|
|
* Maintainer: Kumar Gala
|
|
*
|
|
* Copyright (C) 2006 Polycom, Inc.
|
|
* Copyright 2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* CPM SPI and QE buffer descriptors mode support:
|
|
* Copyright (c) 2009 MontaVista Software, Inc.
|
|
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
|
|
*
|
|
* GRLIB support:
|
|
* Copyright (c) 2012 Aeroflex Gaisler AB.
|
|
* Author: Andreas Larsson <andreas@gaisler.com>
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_bitbang.h>
|
|
#include <linux/types.h>
|
|
|
|
#ifdef CONFIG_FSL_SOC
|
|
#include <sysdev/fsl_soc.h>
|
|
#endif
|
|
|
|
/* Specific to the MPC8306/MPC8309 */
|
|
#define IMMR_SPI_CS_OFFSET 0x14c
|
|
#define SPI_BOOT_SEL_BIT 0x80000000
|
|
|
|
#include "spi-fsl-lib.h"
|
|
#include "spi-fsl-cpm.h"
|
|
#include "spi-fsl-spi.h"
|
|
|
|
#define TYPE_FSL 0
|
|
#define TYPE_GRLIB 1
|
|
|
|
struct fsl_spi_match_data {
|
|
int type;
|
|
};
|
|
|
|
static struct fsl_spi_match_data of_fsl_spi_fsl_config = {
|
|
.type = TYPE_FSL,
|
|
};
|
|
|
|
static struct fsl_spi_match_data of_fsl_spi_grlib_config = {
|
|
.type = TYPE_GRLIB,
|
|
};
|
|
|
|
static const struct of_device_id of_fsl_spi_match[] = {
|
|
{
|
|
.compatible = "fsl,spi",
|
|
.data = &of_fsl_spi_fsl_config,
|
|
},
|
|
{
|
|
.compatible = "aeroflexgaisler,spictrl",
|
|
.data = &of_fsl_spi_grlib_config,
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_fsl_spi_match);
|
|
|
|
static int fsl_spi_get_type(struct device *dev)
|
|
{
|
|
const struct of_device_id *match;
|
|
|
|
if (dev->of_node) {
|
|
match = of_match_node(of_fsl_spi_match, dev->of_node);
|
|
if (match && match->data)
|
|
return ((struct fsl_spi_match_data *)match->data)->type;
|
|
}
|
|
return TYPE_FSL;
|
|
}
|
|
|
|
static void fsl_spi_change_mode(struct spi_device *spi)
|
|
{
|
|
struct mpc8xxx_spi *mspi = spi_controller_get_devdata(spi->controller);
|
|
struct spi_mpc8xxx_cs *cs = spi->controller_state;
|
|
struct fsl_spi_reg __iomem *reg_base = mspi->reg_base;
|
|
__be32 __iomem *mode = ®_base->mode;
|
|
unsigned long flags;
|
|
|
|
if (cs->hw_mode == mpc8xxx_spi_read_reg(mode))
|
|
return;
|
|
|
|
/* Turn off IRQs locally to minimize time that SPI is disabled. */
|
|
local_irq_save(flags);
|
|
|
|
/* Turn off SPI unit prior changing mode */
|
|
mpc8xxx_spi_write_reg(mode, cs->hw_mode & ~SPMODE_ENABLE);
|
|
|
|
/* When in CPM mode, we need to reinit tx and rx. */
|
|
if (mspi->flags & SPI_CPM_MODE) {
|
|
fsl_spi_cpm_reinit_txrx(mspi);
|
|
}
|
|
mpc8xxx_spi_write_reg(mode, cs->hw_mode);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static void fsl_spi_qe_cpu_set_shifts(u32 *rx_shift, u32 *tx_shift,
|
|
int bits_per_word, int msb_first)
|
|
{
|
|
*rx_shift = 0;
|
|
*tx_shift = 0;
|
|
if (msb_first) {
|
|
if (bits_per_word <= 8) {
|
|
*rx_shift = 16;
|
|
*tx_shift = 24;
|
|
} else if (bits_per_word <= 16) {
|
|
*rx_shift = 16;
|
|
*tx_shift = 16;
|
|
}
|
|
} else {
|
|
if (bits_per_word <= 8)
|
|
*rx_shift = 8;
|
|
}
|
|
}
|
|
|
|
static void fsl_spi_grlib_set_shifts(u32 *rx_shift, u32 *tx_shift,
|
|
int bits_per_word, int msb_first)
|
|
{
|
|
*rx_shift = 0;
|
|
*tx_shift = 0;
|
|
if (bits_per_word <= 16) {
|
|
if (msb_first) {
|
|
*rx_shift = 16; /* LSB in bit 16 */
|
|
*tx_shift = 32 - bits_per_word; /* MSB in bit 31 */
|
|
} else {
|
|
*rx_shift = 16 - bits_per_word; /* MSB in bit 15 */
|
|
}
|
|
}
|
|
}
|
|
|
|
static void mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs,
|
|
struct spi_device *spi,
|
|
struct mpc8xxx_spi *mpc8xxx_spi,
|
|
int bits_per_word)
|
|
{
|
|
cs->rx_shift = 0;
|
|
cs->tx_shift = 0;
|
|
if (bits_per_word <= 8) {
|
|
cs->get_rx = mpc8xxx_spi_rx_buf_u8;
|
|
cs->get_tx = mpc8xxx_spi_tx_buf_u8;
|
|
} else if (bits_per_word <= 16) {
|
|
cs->get_rx = mpc8xxx_spi_rx_buf_u16;
|
|
cs->get_tx = mpc8xxx_spi_tx_buf_u16;
|
|
} else if (bits_per_word <= 32) {
|
|
cs->get_rx = mpc8xxx_spi_rx_buf_u32;
|
|
cs->get_tx = mpc8xxx_spi_tx_buf_u32;
|
|
}
|
|
|
|
if (mpc8xxx_spi->set_shifts)
|
|
mpc8xxx_spi->set_shifts(&cs->rx_shift, &cs->tx_shift,
|
|
bits_per_word,
|
|
!(spi->mode & SPI_LSB_FIRST));
|
|
|
|
mpc8xxx_spi->rx_shift = cs->rx_shift;
|
|
mpc8xxx_spi->tx_shift = cs->tx_shift;
|
|
mpc8xxx_spi->get_rx = cs->get_rx;
|
|
mpc8xxx_spi->get_tx = cs->get_tx;
|
|
}
|
|
|
|
static int fsl_spi_setup_transfer(struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct mpc8xxx_spi *mpc8xxx_spi;
|
|
int bits_per_word = 0;
|
|
u8 pm;
|
|
u32 hz = 0;
|
|
struct spi_mpc8xxx_cs *cs = spi->controller_state;
|
|
|
|
mpc8xxx_spi = spi_controller_get_devdata(spi->controller);
|
|
|
|
if (t) {
|
|
bits_per_word = t->bits_per_word;
|
|
hz = t->speed_hz;
|
|
}
|
|
|
|
/* spi_transfer level calls that work per-word */
|
|
if (!bits_per_word)
|
|
bits_per_word = spi->bits_per_word;
|
|
|
|
if (!hz)
|
|
hz = spi->max_speed_hz;
|
|
|
|
if (!(mpc8xxx_spi->flags & SPI_CPM_MODE))
|
|
mspi_apply_cpu_mode_quirks(cs, spi, mpc8xxx_spi, bits_per_word);
|
|
|
|
if (bits_per_word == 32)
|
|
bits_per_word = 0;
|
|
else
|
|
bits_per_word = bits_per_word - 1;
|
|
|
|
/* mask out bits we are going to set */
|
|
cs->hw_mode &= ~(SPMODE_LEN(0xF) | SPMODE_DIV16
|
|
| SPMODE_PM(0xF));
|
|
|
|
cs->hw_mode |= SPMODE_LEN(bits_per_word);
|
|
|
|
if ((mpc8xxx_spi->spibrg / hz) > 64) {
|
|
cs->hw_mode |= SPMODE_DIV16;
|
|
pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1;
|
|
WARN_ONCE(pm > 16,
|
|
"%s: Requested speed is too low: %d Hz. Will use %d Hz instead.\n",
|
|
dev_name(&spi->dev), hz, mpc8xxx_spi->spibrg / 1024);
|
|
if (pm > 16)
|
|
pm = 16;
|
|
} else {
|
|
pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1;
|
|
}
|
|
if (pm)
|
|
pm--;
|
|
|
|
cs->hw_mode |= SPMODE_PM(pm);
|
|
|
|
fsl_spi_change_mode(spi);
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spi_cpu_bufs(struct mpc8xxx_spi *mspi,
|
|
struct spi_transfer *t, unsigned int len)
|
|
{
|
|
u32 word;
|
|
struct fsl_spi_reg __iomem *reg_base = mspi->reg_base;
|
|
|
|
mspi->count = len;
|
|
|
|
/* enable rx ints */
|
|
mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE);
|
|
|
|
/* transmit word */
|
|
word = mspi->get_tx(mspi);
|
|
mpc8xxx_spi_write_reg(®_base->transmit, word);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct mpc8xxx_spi *mpc8xxx_spi = spi_controller_get_devdata(spi->controller);
|
|
struct fsl_spi_reg __iomem *reg_base;
|
|
unsigned int len = t->len;
|
|
u8 bits_per_word;
|
|
int ret;
|
|
|
|
reg_base = mpc8xxx_spi->reg_base;
|
|
bits_per_word = spi->bits_per_word;
|
|
if (t->bits_per_word)
|
|
bits_per_word = t->bits_per_word;
|
|
|
|
if (bits_per_word > 8)
|
|
len /= 2;
|
|
if (bits_per_word > 16)
|
|
len /= 2;
|
|
|
|
mpc8xxx_spi->tx = t->tx_buf;
|
|
mpc8xxx_spi->rx = t->rx_buf;
|
|
|
|
reinit_completion(&mpc8xxx_spi->done);
|
|
|
|
if (mpc8xxx_spi->flags & SPI_CPM_MODE)
|
|
ret = fsl_spi_cpm_bufs(mpc8xxx_spi, t);
|
|
else
|
|
ret = fsl_spi_cpu_bufs(mpc8xxx_spi, t, len);
|
|
if (ret)
|
|
return ret;
|
|
|
|
wait_for_completion(&mpc8xxx_spi->done);
|
|
|
|
/* disable rx ints */
|
|
mpc8xxx_spi_write_reg(®_base->mask, 0);
|
|
|
|
if (mpc8xxx_spi->flags & SPI_CPM_MODE)
|
|
fsl_spi_cpm_bufs_complete(mpc8xxx_spi);
|
|
|
|
return mpc8xxx_spi->count;
|
|
}
|
|
|
|
static int fsl_spi_prepare_message(struct spi_controller *ctlr,
|
|
struct spi_message *m)
|
|
{
|
|
struct mpc8xxx_spi *mpc8xxx_spi = spi_controller_get_devdata(ctlr);
|
|
struct spi_transfer *t;
|
|
struct spi_transfer *first;
|
|
|
|
first = list_first_entry(&m->transfers, struct spi_transfer,
|
|
transfer_list);
|
|
|
|
/*
|
|
* In CPU mode, optimize large byte transfers to use larger
|
|
* bits_per_word values to reduce number of interrupts taken.
|
|
*
|
|
* Some glitches can appear on the SPI clock when the mode changes.
|
|
* Check that there is no speed change during the transfer and set it up
|
|
* now to change the mode without having a chip-select asserted.
|
|
*/
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
if (t->speed_hz != first->speed_hz) {
|
|
dev_err(&m->spi->dev,
|
|
"speed_hz cannot change during message.\n");
|
|
return -EINVAL;
|
|
}
|
|
if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) {
|
|
if (t->len < 256 || t->bits_per_word != 8)
|
|
continue;
|
|
if ((t->len & 3) == 0)
|
|
t->bits_per_word = 32;
|
|
else if ((t->len & 1) == 0)
|
|
t->bits_per_word = 16;
|
|
} else {
|
|
/*
|
|
* CPM/QE uses Little Endian for words > 8
|
|
* so transform 16 and 32 bits words into 8 bits
|
|
* Unfortnatly that doesn't work for LSB so
|
|
* reject these for now
|
|
* Note: 32 bits word, LSB works iff
|
|
* tfcr/rfcr is set to CPMFCR_GBL
|
|
*/
|
|
if (m->spi->mode & SPI_LSB_FIRST && t->bits_per_word > 8)
|
|
return -EINVAL;
|
|
if (t->bits_per_word == 16 || t->bits_per_word == 32)
|
|
t->bits_per_word = 8; /* pretend its 8 bits */
|
|
if (t->bits_per_word == 8 && t->len >= 256 &&
|
|
!(t->len & 1) && (mpc8xxx_spi->flags & SPI_CPM1))
|
|
t->bits_per_word = 16;
|
|
}
|
|
}
|
|
return fsl_spi_setup_transfer(m->spi, first);
|
|
}
|
|
|
|
static int fsl_spi_transfer_one(struct spi_controller *controller,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
int status;
|
|
|
|
status = fsl_spi_setup_transfer(spi, t);
|
|
if (status < 0)
|
|
return status;
|
|
if (t->len)
|
|
status = fsl_spi_bufs(spi, t);
|
|
if (status > 0)
|
|
return -EMSGSIZE;
|
|
|
|
return status;
|
|
}
|
|
|
|
static int fsl_spi_unprepare_message(struct spi_controller *controller,
|
|
struct spi_message *msg)
|
|
{
|
|
return fsl_spi_setup_transfer(msg->spi, NULL);
|
|
}
|
|
|
|
static int fsl_spi_setup(struct spi_device *spi)
|
|
{
|
|
struct mpc8xxx_spi *mpc8xxx_spi;
|
|
struct fsl_spi_reg __iomem *reg_base;
|
|
bool initial_setup = false;
|
|
int retval;
|
|
u32 hw_mode;
|
|
struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi);
|
|
|
|
if (!spi->max_speed_hz)
|
|
return -EINVAL;
|
|
|
|
if (!cs) {
|
|
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
|
|
if (!cs)
|
|
return -ENOMEM;
|
|
spi_set_ctldata(spi, cs);
|
|
initial_setup = true;
|
|
}
|
|
mpc8xxx_spi = spi_controller_get_devdata(spi->controller);
|
|
|
|
reg_base = mpc8xxx_spi->reg_base;
|
|
|
|
hw_mode = cs->hw_mode; /* Save original settings */
|
|
cs->hw_mode = mpc8xxx_spi_read_reg(®_base->mode);
|
|
/* mask out bits we are going to set */
|
|
cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
|
|
| SPMODE_REV | SPMODE_LOOP);
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK;
|
|
if (spi->mode & SPI_CPOL)
|
|
cs->hw_mode |= SPMODE_CI_INACTIVEHIGH;
|
|
if (!(spi->mode & SPI_LSB_FIRST))
|
|
cs->hw_mode |= SPMODE_REV;
|
|
if (spi->mode & SPI_LOOP)
|
|
cs->hw_mode |= SPMODE_LOOP;
|
|
|
|
retval = fsl_spi_setup_transfer(spi, NULL);
|
|
if (retval < 0) {
|
|
cs->hw_mode = hw_mode; /* Restore settings */
|
|
if (initial_setup)
|
|
kfree(cs);
|
|
return retval;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_spi_cleanup(struct spi_device *spi)
|
|
{
|
|
struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi);
|
|
|
|
kfree(cs);
|
|
spi_set_ctldata(spi, NULL);
|
|
}
|
|
|
|
static void fsl_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
|
|
{
|
|
struct fsl_spi_reg __iomem *reg_base = mspi->reg_base;
|
|
|
|
/* We need handle RX first */
|
|
if (events & SPIE_NE) {
|
|
u32 rx_data = mpc8xxx_spi_read_reg(®_base->receive);
|
|
|
|
if (mspi->rx)
|
|
mspi->get_rx(rx_data, mspi);
|
|
}
|
|
|
|
if ((events & SPIE_NF) == 0)
|
|
/* spin until TX is done */
|
|
while (((events =
|
|
mpc8xxx_spi_read_reg(®_base->event)) &
|
|
SPIE_NF) == 0)
|
|
cpu_relax();
|
|
|
|
/* Clear the events */
|
|
mpc8xxx_spi_write_reg(®_base->event, events);
|
|
|
|
mspi->count -= 1;
|
|
if (mspi->count) {
|
|
u32 word = mspi->get_tx(mspi);
|
|
|
|
mpc8xxx_spi_write_reg(®_base->transmit, word);
|
|
} else {
|
|
complete(&mspi->done);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t fsl_spi_irq(s32 irq, void *context_data)
|
|
{
|
|
struct mpc8xxx_spi *mspi = context_data;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 events;
|
|
struct fsl_spi_reg __iomem *reg_base = mspi->reg_base;
|
|
|
|
/* Get interrupt events(tx/rx) */
|
|
events = mpc8xxx_spi_read_reg(®_base->event);
|
|
if (events)
|
|
ret = IRQ_HANDLED;
|
|
|
|
dev_dbg(mspi->dev, "%s: events %x\n", __func__, events);
|
|
|
|
if (mspi->flags & SPI_CPM_MODE)
|
|
fsl_spi_cpm_irq(mspi, events);
|
|
else
|
|
fsl_spi_cpu_irq(mspi, events);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void fsl_spi_grlib_cs_control(struct spi_device *spi, bool on)
|
|
{
|
|
struct mpc8xxx_spi *mpc8xxx_spi = spi_controller_get_devdata(spi->controller);
|
|
struct fsl_spi_reg __iomem *reg_base = mpc8xxx_spi->reg_base;
|
|
u32 slvsel;
|
|
u16 cs = spi_get_chipselect(spi, 0);
|
|
|
|
if (cs < mpc8xxx_spi->native_chipselects) {
|
|
slvsel = mpc8xxx_spi_read_reg(®_base->slvsel);
|
|
slvsel = on ? (slvsel | (1 << cs)) : (slvsel & ~(1 << cs));
|
|
mpc8xxx_spi_write_reg(®_base->slvsel, slvsel);
|
|
}
|
|
}
|
|
|
|
static void fsl_spi_grlib_probe(struct device *dev)
|
|
{
|
|
struct spi_controller *host = dev_get_drvdata(dev);
|
|
struct mpc8xxx_spi *mpc8xxx_spi = spi_controller_get_devdata(host);
|
|
struct fsl_spi_reg __iomem *reg_base = mpc8xxx_spi->reg_base;
|
|
int mbits;
|
|
u32 capabilities;
|
|
|
|
capabilities = mpc8xxx_spi_read_reg(®_base->cap);
|
|
|
|
mpc8xxx_spi->set_shifts = fsl_spi_grlib_set_shifts;
|
|
mbits = SPCAP_MAXWLEN(capabilities);
|
|
if (mbits)
|
|
mpc8xxx_spi->max_bits_per_word = mbits + 1;
|
|
|
|
mpc8xxx_spi->native_chipselects = 0;
|
|
if (SPCAP_SSEN(capabilities)) {
|
|
mpc8xxx_spi->native_chipselects = SPCAP_SSSZ(capabilities);
|
|
mpc8xxx_spi_write_reg(®_base->slvsel, 0xffffffff);
|
|
}
|
|
host->num_chipselect = mpc8xxx_spi->native_chipselects;
|
|
host->set_cs = fsl_spi_grlib_cs_control;
|
|
}
|
|
|
|
static void fsl_spi_cs_control(struct spi_device *spi, bool on)
|
|
{
|
|
struct device *dev = spi->dev.parent->parent;
|
|
struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
|
|
struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata);
|
|
|
|
if (WARN_ON_ONCE(!pinfo->immr_spi_cs))
|
|
return;
|
|
iowrite32be(on ? 0 : SPI_BOOT_SEL_BIT, pinfo->immr_spi_cs);
|
|
}
|
|
|
|
static struct spi_controller *fsl_spi_probe(struct device *dev,
|
|
struct resource *mem, unsigned int irq)
|
|
{
|
|
struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
|
|
struct spi_controller *host;
|
|
struct mpc8xxx_spi *mpc8xxx_spi;
|
|
struct fsl_spi_reg __iomem *reg_base;
|
|
u32 regval;
|
|
int ret = 0;
|
|
|
|
host = spi_alloc_host(dev, sizeof(struct mpc8xxx_spi));
|
|
if (host == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
dev_set_drvdata(dev, host);
|
|
|
|
mpc8xxx_spi_probe(dev, mem, irq);
|
|
|
|
host->setup = fsl_spi_setup;
|
|
host->cleanup = fsl_spi_cleanup;
|
|
host->prepare_message = fsl_spi_prepare_message;
|
|
host->transfer_one = fsl_spi_transfer_one;
|
|
host->unprepare_message = fsl_spi_unprepare_message;
|
|
host->use_gpio_descriptors = true;
|
|
host->set_cs = fsl_spi_cs_control;
|
|
|
|
mpc8xxx_spi = spi_controller_get_devdata(host);
|
|
mpc8xxx_spi->max_bits_per_word = 32;
|
|
mpc8xxx_spi->type = fsl_spi_get_type(dev);
|
|
|
|
ret = fsl_spi_cpm_init(mpc8xxx_spi);
|
|
if (ret)
|
|
goto err_cpm_init;
|
|
|
|
mpc8xxx_spi->reg_base = devm_ioremap_resource(dev, mem);
|
|
if (IS_ERR(mpc8xxx_spi->reg_base)) {
|
|
ret = PTR_ERR(mpc8xxx_spi->reg_base);
|
|
goto err_probe;
|
|
}
|
|
|
|
if (mpc8xxx_spi->type == TYPE_GRLIB)
|
|
fsl_spi_grlib_probe(dev);
|
|
|
|
if (mpc8xxx_spi->flags & SPI_CPM_MODE)
|
|
host->bits_per_word_mask =
|
|
(SPI_BPW_RANGE_MASK(4, 8) | SPI_BPW_MASK(16) | SPI_BPW_MASK(32));
|
|
else
|
|
host->bits_per_word_mask =
|
|
(SPI_BPW_RANGE_MASK(4, 16) | SPI_BPW_MASK(32));
|
|
|
|
host->bits_per_word_mask &=
|
|
SPI_BPW_RANGE_MASK(1, mpc8xxx_spi->max_bits_per_word);
|
|
|
|
if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE)
|
|
mpc8xxx_spi->set_shifts = fsl_spi_qe_cpu_set_shifts;
|
|
|
|
if (mpc8xxx_spi->set_shifts)
|
|
/* 8 bits per word and MSB first */
|
|
mpc8xxx_spi->set_shifts(&mpc8xxx_spi->rx_shift,
|
|
&mpc8xxx_spi->tx_shift, 8, 1);
|
|
|
|
/* Register for SPI Interrupt */
|
|
ret = devm_request_irq(dev, mpc8xxx_spi->irq, fsl_spi_irq,
|
|
0, "fsl_spi", mpc8xxx_spi);
|
|
|
|
if (ret != 0)
|
|
goto err_probe;
|
|
|
|
reg_base = mpc8xxx_spi->reg_base;
|
|
|
|
/* SPI controller initializations */
|
|
mpc8xxx_spi_write_reg(®_base->mode, 0);
|
|
mpc8xxx_spi_write_reg(®_base->mask, 0);
|
|
mpc8xxx_spi_write_reg(®_base->command, 0);
|
|
mpc8xxx_spi_write_reg(®_base->event, 0xffffffff);
|
|
|
|
/* Enable SPI interface */
|
|
regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
|
|
if (mpc8xxx_spi->max_bits_per_word < 8) {
|
|
regval &= ~SPMODE_LEN(0xF);
|
|
regval |= SPMODE_LEN(mpc8xxx_spi->max_bits_per_word - 1);
|
|
}
|
|
if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE)
|
|
regval |= SPMODE_OP;
|
|
|
|
mpc8xxx_spi_write_reg(®_base->mode, regval);
|
|
|
|
ret = devm_spi_register_controller(dev, host);
|
|
if (ret < 0)
|
|
goto err_probe;
|
|
|
|
dev_info(dev, "at MMIO %pa (irq = %d), %s mode\n", &mem->start,
|
|
mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags));
|
|
|
|
return host;
|
|
|
|
err_probe:
|
|
fsl_spi_cpm_free(mpc8xxx_spi);
|
|
err_cpm_init:
|
|
spi_controller_put(host);
|
|
err:
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
static int of_fsl_spi_probe(struct platform_device *ofdev)
|
|
{
|
|
struct device *dev = &ofdev->dev;
|
|
struct device_node *np = ofdev->dev.of_node;
|
|
struct spi_controller *host;
|
|
struct resource mem;
|
|
int irq, type;
|
|
int ret;
|
|
bool spisel_boot = false;
|
|
#if IS_ENABLED(CONFIG_FSL_SOC)
|
|
struct mpc8xxx_spi_probe_info *pinfo = NULL;
|
|
#endif
|
|
|
|
|
|
ret = of_mpc8xxx_spi_probe(ofdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
type = fsl_spi_get_type(&ofdev->dev);
|
|
if (type == TYPE_FSL) {
|
|
struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
|
|
#if IS_ENABLED(CONFIG_FSL_SOC)
|
|
pinfo = to_of_pinfo(pdata);
|
|
|
|
spisel_boot = of_property_read_bool(np, "fsl,spisel_boot");
|
|
if (spisel_boot) {
|
|
pinfo->immr_spi_cs = ioremap(get_immrbase() + IMMR_SPI_CS_OFFSET, 4);
|
|
if (!pinfo->immr_spi_cs)
|
|
return -ENOMEM;
|
|
}
|
|
#endif
|
|
/*
|
|
* Handle the case where we have one hardwired (always selected)
|
|
* device on the first "chipselect". Else we let the core code
|
|
* handle any GPIOs or native chip selects and assign the
|
|
* appropriate callback for dealing with the CS lines. This isn't
|
|
* supported on the GRLIB variant.
|
|
*/
|
|
ret = gpiod_count(dev, "cs");
|
|
if (ret < 0)
|
|
ret = 0;
|
|
if (ret == 0 && !spisel_boot)
|
|
pdata->max_chipselect = 1;
|
|
else
|
|
pdata->max_chipselect = ret + spisel_boot;
|
|
}
|
|
|
|
ret = of_address_to_resource(np, 0, &mem);
|
|
if (ret)
|
|
goto unmap_out;
|
|
|
|
irq = platform_get_irq(ofdev, 0);
|
|
if (irq < 0) {
|
|
ret = irq;
|
|
goto unmap_out;
|
|
}
|
|
|
|
host = fsl_spi_probe(dev, &mem, irq);
|
|
|
|
return PTR_ERR_OR_ZERO(host);
|
|
|
|
unmap_out:
|
|
#if IS_ENABLED(CONFIG_FSL_SOC)
|
|
if (spisel_boot)
|
|
iounmap(pinfo->immr_spi_cs);
|
|
#endif
|
|
return ret;
|
|
}
|
|
|
|
static void of_fsl_spi_remove(struct platform_device *ofdev)
|
|
{
|
|
struct spi_controller *host = platform_get_drvdata(ofdev);
|
|
struct mpc8xxx_spi *mpc8xxx_spi = spi_controller_get_devdata(host);
|
|
|
|
fsl_spi_cpm_free(mpc8xxx_spi);
|
|
}
|
|
|
|
static struct platform_driver of_fsl_spi_driver = {
|
|
.driver = {
|
|
.name = "fsl_spi",
|
|
.of_match_table = of_fsl_spi_match,
|
|
},
|
|
.probe = of_fsl_spi_probe,
|
|
.remove = of_fsl_spi_remove,
|
|
};
|
|
|
|
#ifdef CONFIG_MPC832x_RDB
|
|
/*
|
|
* XXX XXX XXX
|
|
* This is "legacy" platform driver, was used by the MPC8323E-RDB boards
|
|
* only. The driver should go away soon, since newer MPC8323E-RDB's device
|
|
* tree can work with OpenFirmware driver. But for now we support old trees
|
|
* as well.
|
|
*/
|
|
static int plat_mpc8xxx_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *mem;
|
|
int irq;
|
|
struct spi_controller *host;
|
|
|
|
if (!dev_get_platdata(&pdev->dev))
|
|
return -EINVAL;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!mem)
|
|
return -EINVAL;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
host = fsl_spi_probe(&pdev->dev, mem, irq);
|
|
return PTR_ERR_OR_ZERO(host);
|
|
}
|
|
|
|
static void plat_mpc8xxx_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_controller *host = platform_get_drvdata(pdev);
|
|
struct mpc8xxx_spi *mpc8xxx_spi = spi_controller_get_devdata(host);
|
|
|
|
fsl_spi_cpm_free(mpc8xxx_spi);
|
|
}
|
|
|
|
MODULE_ALIAS("platform:mpc8xxx_spi");
|
|
static struct platform_driver mpc8xxx_spi_driver = {
|
|
.probe = plat_mpc8xxx_spi_probe,
|
|
.remove = plat_mpc8xxx_spi_remove,
|
|
.driver = {
|
|
.name = "mpc8xxx_spi",
|
|
},
|
|
};
|
|
|
|
static bool legacy_driver_failed;
|
|
|
|
static void __init legacy_driver_register(void)
|
|
{
|
|
legacy_driver_failed = platform_driver_register(&mpc8xxx_spi_driver);
|
|
}
|
|
|
|
static void __exit legacy_driver_unregister(void)
|
|
{
|
|
if (legacy_driver_failed)
|
|
return;
|
|
platform_driver_unregister(&mpc8xxx_spi_driver);
|
|
}
|
|
#else
|
|
static void __init legacy_driver_register(void) {}
|
|
static void __exit legacy_driver_unregister(void) {}
|
|
#endif /* CONFIG_MPC832x_RDB */
|
|
|
|
static int __init fsl_spi_init(void)
|
|
{
|
|
legacy_driver_register();
|
|
return platform_driver_register(&of_fsl_spi_driver);
|
|
}
|
|
module_init(fsl_spi_init);
|
|
|
|
static void __exit fsl_spi_exit(void)
|
|
{
|
|
platform_driver_unregister(&of_fsl_spi_driver);
|
|
legacy_driver_unregister();
|
|
}
|
|
module_exit(fsl_spi_exit);
|
|
|
|
MODULE_AUTHOR("Kumar Gala");
|
|
MODULE_DESCRIPTION("Simple Freescale SPI Driver");
|
|
MODULE_LICENSE("GPL");
|