Files
linux/drivers/gpu/drm/tilcdc/tilcdc_drv.h
Kory Maincent (TI.com) 323401c9a1 drm/tilcdc: Convert to DRM managed resources
Convert the tilcdc driver to use DRM managed resources (drmm_* APIs)
to eliminate resource lifetime issues, particularly in probe deferral
scenarios.

This conversion addresses potential use-after-free bugs by ensuring
proper cleanup ordering through the DRM managed resource framework.
The changes include:
- Replace drm_crtc_init_with_planes() with drmm_crtc_alloc_with_planes()
- Replace drm_universal_plane_init() with drmm_universal_plane_alloc()
- Replace drm_simple_encoder_init() with drmm_simple_encoder_alloc()
- Remove manual cleanup in tilcdc_crtc_destroy() and error paths
- Remove drm_encoder_cleanup() from encoder error handling paths
- Use drmm_add_action_or_reset() for remaining cleanup operations

This approach is recommended by the DRM subsystem for improved resource
lifetime management and is particularly important for drivers that may
experience probe deferral.

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-18-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
2026-02-11 09:16:15 +01:00

109 lines
2.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2012 Texas Instruments
* Author: Rob Clark <robdclark@gmail.com>
*/
#ifndef __TILCDC_DRV_H__
#define __TILCDC_DRV_H__
#include <linux/cpufreq.h>
#include <linux/irqreturn.h>
#include <drm/drm_print.h>
struct clk;
struct workqueue_struct;
struct drm_connector;
struct drm_connector_helper_funcs;
struct drm_crtc;
struct drm_device;
struct drm_display_mode;
struct drm_encoder;
struct drm_framebuffer;
struct drm_minor;
struct drm_pending_vblank_event;
struct drm_plane;
/* Defaulting to pixel clock defined on AM335x */
#define TILCDC_DEFAULT_MAX_PIXELCLOCK 126000
/* Maximum display width for LCDC V1 */
#define TILCDC_DEFAULT_MAX_WIDTH_V1 1024
/* ... and for LCDC V2 found on AM335x: */
#define TILCDC_DEFAULT_MAX_WIDTH_V2 2048
/*
* This may need some tweaking, but want to allow at least 1280x1024@60
* with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to
* be supportable
*/
#define TILCDC_DEFAULT_MAX_BANDWIDTH (1280*1024*60)
struct tilcdc_drm_private {
void __iomem *mmio;
struct clk *clk; /* functional clock */
int rev; /* IP revision */
unsigned int irq;
struct drm_device ddev;
/* don't attempt resolutions w/ higher W * H * Hz: */
uint32_t max_bandwidth;
/*
* Pixel Clock will be restricted to some value as
* defined in the device datasheet measured in KHz
*/
uint32_t max_pixelclock;
/*
* Max allowable width is limited on a per device basis
* measured in pixels
*/
uint32_t max_width;
u32 fifo_th;
/* Supported pixel formats */
const uint32_t *pixelformats;
uint32_t num_pixelformats;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
struct workqueue_struct *wq;
struct drm_crtc *crtc;
struct tilcdc_encoder *encoder;
struct drm_connector *connector;
bool irq_enabled;
};
#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
#define ddev_to_tilcdc_priv(x) container_of(x, struct tilcdc_drm_private, ddev)
int tilcdc_crtc_create(struct drm_device *dev);
irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc);
void tilcdc_crtc_update_clk(struct drm_crtc *crtc);
void tilcdc_crtc_shutdown(struct drm_crtc *crtc);
int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event);
struct tilcdc_plane {
struct drm_plane base;
};
struct tilcdc_encoder {
struct drm_encoder base;
};
struct tilcdc_plane *tilcdc_plane_init(struct drm_device *dev);
#endif /* __TILCDC_DRV_H__ */