In elf_validity_cache_sechdrs, section sizes and offsets are validated,
unless the section type is SHT_NULL or SHT_NOBITS.
Later, elf_validity_cache_secstrings and elf_validity_cache_index_str
access the section name table (.shstrtab) and symbol string table
(.strtab) headers without first ensuring that their types are
SHT_STRTAB. If a section type is SHT_NULL or SHT_NOBITS, sh_offset has
not been validated and may reference out-of-bounds memory when
dereferenced in elf_validity_cache_secstrings or
elf_validity_cache_strtab.
Validate that both string section headers are of type SHT_STRTAB before
caching them.
Cc: stable@vger.kernel.org
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Use strcmp() instead of strlen()+memcmp() to compare module names in
kmod_dup_request_lookup(), since all strings are NUL-terminated.
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Use scope-based cleanup helpers for kmod_dup_mutex and kmod_req to shorten
the code and to clarify where the lock is taken in
kmod_dup_request_exists_wait().
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The kmod dups code preallocates kmod_dup_req before taking kmod_dup_mutex
to avoid allocating memory while holding the lock. This provides little
benefit, since the allocation is fast and can safely be done under the
lock. On the other hand, it leads to unnecessary allocations when the
request turns out to be a duplicate and slightly complicates the code.
Allocate kmod_dup_req only when needed and introduce a helper function
alloc_kmod_req() to initialize the structure.
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed
only after it is no longer referenced. When releasing an instance, the
kmod_dup_request_delete() function removes the kmod_dup_req from the
dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it.
However, this doesn't work correctly because parallel users referencing the
instance in kmod_dup_request_exists_wait() don't enter an RCU read-side
critical section. This can result in a use-after-free.
The kmod_dup_request_exists_wait() function may need to hold a valid
reference to a kmod_dup_req instance across a blocking wait until the
corresponding modprobe command completes. This makes it unsuitable for RCU.
Fix the issue by changing the lifecycle management of kmod_dup_req to use
reference counting.
Fixes: 8660484ed1 ("module: add debugging auto-load duplicate module support")
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
When kmod_dup_request_announce() announces the completion of
a request_module() call to duplicate waiters, it queues a work item to
invoke kmod_dup_request_complete(), and only that function calls
complete_all().
This adds an arbitrary delay that is unnecessary and provides little
benefit. Call complete_all() directly from kmod_dup_request_announce()
instead.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Historically, various parameter-handling code kept pointers into
module::args, most notably the charp support. However, in 2009,
commit e180a6b775 ("param: fix charp parameters set via sysfs") changed
charp parameters to kstrdup() the input string as well. As a result,
module::args now mostly wastes memory.
The last users that still pointed into module::args have now been cleaned
up, so remove this data.
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
module_total_size() returns unsigned int but uses a signed int
accumulator. While the result is numerically correct, the type
mismatch is misleading.
Change the accumulator to unsigned int to match the return type.
Signed-off-by: Naveen Kumar Chaudhary <naveen.osdev@gmail.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
[ppavlu: correct the commit title]
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Both try_add_failed_module() and kmod_dup_request_exists_wait() use
memcpy() with strlen() to copy module names into fixed-size
char[MODULE_NAME_LEN] buffers. Neither performs a bounds check on the
copy. Current callers always pass names originating from
mod->name (itself char[MODULE_NAME_LEN]), so this is not exploitable
today. However both functions accept a plain const char * with no
documented length contract, making them latent buffer overflows if a
future caller passes a longer string.
Replace memcpy() with strscpy() in both sites, which bounds the copy
to MODULE_NAME_LEN and always NUL-terminates.
Signed-off-by: Naveen Kumar Chaudhary <naveen.osdev@gmail.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The symbol lookup code assumes the queried address resides in either
MOD_TEXT or MOD_INIT_TEXT. This breaks for addresses in other module
memory regions (e.g. rodata or data), resulting in incorrect upper
bounds and wrong symbol size.
Select the module memory region the address belongs to instead of
hardcoding text sections. Also initialize the lower bound to the start
of that region, as searching from address 0 is unnecessary.
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
module_extend_max_pages() calls kvrealloc() internally and returns
-ENOMEM on allocation failure. The return value is never checked.
If the initial allocation fails, info->pages remains NULL and
info->max_pages remains 0. Subsequent calls to module_get_next_page()
will attempt to dynamically grow the array by calling
module_extend_max_pages(info, 0) since info->used_pages is 0. This
results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated
as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel
oops.
Fix: add the missing error check after module_extend_max_pages() and
return immediately on failure. This matches the pattern used by every
other kvrealloc() caller in the module loading path.
Fixes: b1ae6dc41e ("module: add in-kernel support for decompressing")
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Andrii Kuchmenko <capyenglishlite@gmail.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
[Sami: Corrected the analysis in the commit message.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
It should now be rare to trigger this warning - it doesn't need to be so
verbose. Make it follow the usual style in the module loading code.
For the same reason, drop the dump_stack().
Suggested-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Lucas De Marchi <demarchi@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
The *_gpl section are not being used populated by modpost anymore. Hence
the module loader doesn't need to find and process these sections in
modules.
This patch also simplifies symbol finding logic in module loader since
*_gpl sections don't have to be searched anymore.
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Read kflagstab section for vmlinux and modules to determine whether
kernel symbols are GPL only.
This patch eliminates the need for fragmenting the ksymtab for infering
the value of GPL-only symbol flag, henceforth stop populating *_gpl
versions of the ksymtab and kcrctab in modpost.
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
The purpose of the constant it is not entirely clear from its name.
As this constant is going to be exposed in a UAPI header, give it a more
specific name for clarity. As all its users call it 'marker', use that
wording in the constant itself.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Add /sys/module/*/import_ns to expose imported namespaces for
currently loaded modules. The file contains one namespace per line and
only exists for modules that import at least one namespace.
Previously, the only way for userspace to inspect the symbol
namespaces a module imports is to locate the .ko on disk and invoke
modinfo(8) to decompress/parse the metadata. The kernel validated
namespaces at load time, but it was otherwise discarded.
Exposing this data via sysfs provides a runtime mechanism to verify
which namespaces are being used by modules. For example, this allows
userspace to audit driver API access in Android GKI, which uses symbol
namespaces to restrict vendor drivers from using specific kernel
interfaces (e.g., direct filesystem access).
Signed-off-by: Nicholas Sielicki <linux@opensource.nslick.com>
[Sami: Updated the commit message to explain motivation.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
When setting a charp module parameter, the param_set_charp() function
allocates memory to store a copy of the input value. Later, when the module
is potentially unloaded, the destroy_params() function is called to free
this allocated memory.
However, destroy_params() is available only when CONFIG_SYSFS=y, otherwise
only a dummy variant is present. In the unlikely case that the kernel is
configured with CONFIG_MODULES=y and CONFIG_SYSFS=n, this results in
a memory leak of charp values when a module is unloaded.
Fix this issue by making destroy_params() always available when
CONFIG_MODULES=y. Rename the function to module_destroy_params() to clarify
that it is intended for use by the module loader.
Fixes: e180a6b775 ("param: fix charp parameters set via sysfs")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
The module Kconfig file contains a set of options related to "Module
versioning support" (depends on MODVERSIONS) and "Module signature
verification" (depends on MODULE_SIG). The Kconfig tool automatically
creates submenus when an entry for a symbol is followed by consecutive
items that all depend on the symbol. However, this functionality doesn't
work for the mentioned module options. The MODVERSIONS options are
interleaved with ASM_MODVERSIONS, which has no 'depends on MODVERSIONS' but
instead uses 'default HAVE_ASM_MODVERSIONS && MODVERSIONS'. Similarly, the
MODULE_SIG options are interleaved by a comment warning not to forget
signing modules with scripts/sign-file, which uses the condition 'depends
on MODULE_SIG_FORCE && !MODULE_SIG_ALL'.
The result is that the options are confusingly shown when using
a menuconfig tool, as follows:
[*] Module versioning support
Module versioning implementation (genksyms (from source code)) --->
[ ] Extended Module Versioning Support
[*] Basic Module Versioning Support
[*] Source checksum for all modules
[*] Module signature verification
[ ] Require modules to be validly signed
[ ] Automatically sign all modules
Hash algorithm to sign modules (SHA-256) --->
Fix the issue by using if/endif to group related options together in
kernel/module/Kconfig, similarly to how the MODULE_DEBUG options are
already grouped. Note that the signing-related options depend on
'MODULE_SIG || IMA_APPRAISE_MODSIG', with the exception of
MODULE_SIG_FORCE, which is valid only for MODULE_SIG and is therefore kept
separately. For consistency, do the same for the MODULE_COMPRESS entries.
The options are then properly placed into submenus, as follows:
[*] Module versioning support
Module versioning implementation (genksyms (from source code)) --->
[ ] Extended Module Versioning Support
[*] Basic Module Versioning Support
[*] Source checksum for all modules
[*] Module signature verification
[ ] Require modules to be validly signed
[ ] Automatically sign all modules
Hash algorithm to sign modules (SHA-256) --->
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
In the error path of load_module(), under the free_module label, the
code calls lockdep_free_key_range() to release lock classes associated
with the MOD_DATA, MOD_RODATA and MOD_RO_AFTER_INIT module regions, and
subsequently invokes module_deallocate().
Since commit ac3b432839 ("module: replace module_layout with
module_memory"), the module_deallocate() function calls free_mod_mem(),
which releases the lock classes as well and considers all module
regions.
Attempting to free these classes twice is unnecessary. Remove the
redundant code in load_module().
Fixes: ac3b432839 ("module: replace module_layout with module_memory")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Pull module updates from Sami Tolvanen:
"Module signing:
- Remove SHA-1 support for signing modules.
SHA-1 is no longer considered secure for signatures due to
vulnerabilities that can lead to hash collisions. None of the major
distributions use SHA-1 anymore, and the kernel has defaulted to
SHA-512 since v6.11.
Note that loading SHA-1 signed modules is still supported.
- Update scripts/sign-file to use only the OpenSSL CMS API for
signing.
As SHA-1 support is gone, we can drop the legacy PKCS#7 API which
was limited to SHA-1. This also cleans up support for legacy
OpenSSL versions.
Cleanups and fixes:
- Use system_dfl_wq instead of the per-cpu system_wq following the
ongoing workqueue API refactoring.
- Avoid open-coded kvrealloc() in module decompression logic by using
the standard helper.
- Improve section annotations by replacing the custom __modinit with
__init_or_module and removing several unused __INIT*_OR_MODULE
macros.
- Fix kernel-doc warnings in include/linux/moduleparam.h.
- Ensure set_module_sig_enforced is only declared when module signing
is enabled.
- Fix gendwarfksyms build failures on 32-bit hosts.
MAINTAINERS:
- Update the module subsystem entry to reflect the maintainer
rotation and update the git repository link"
* tag 'modules-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
modules: moduleparam.h: fix kernel-doc comments
module: Only declare set_module_sig_enforced when CONFIG_MODULE_SIG=y
module/decompress: Avoid open-coded kvrealloc()
gendwarfksyms: Fix build on 32-bit hosts
sign-file: Use only the OpenSSL CMS API for signing
module: Remove SHA-1 support for module signing
module: replace use of system_wq with system_dfl_wq
params: Replace __modinit with __init_or_module
module: Remove unused __INIT*_OR_MODULE macros
MAINTAINERS: Update module subsystem maintainers and repository
Add a GPL-2.0 license identifier line for this file.
kmod.c was originally introduced in the kernel in February
of 1998 by Linus Torvalds - who was familiar with kernel
licensing at the time this was introduced.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SHA-1 is considered deprecated and insecure due to vulnerabilities that can
lead to hash collisions. Most distributions have already been using SHA-2
for module signing because of this. The default was also changed last year
from SHA-1 to SHA-512 in commit f3b93547b9 ("module: sign with sha512
instead of sha1 by default"). This was not reported to cause any issues.
Therefore, it now seems to be a good time to remove SHA-1 support for
module signing.
Commit 16ab7cb582 ("crypto: pkcs7 - remove sha1 support") previously
removed support for reading PKCS#7/CMS signed with SHA-1, along with the
ability to use SHA-1 for module signing. This change broke iwd and was
subsequently completely reverted in commit 203a6763ab ("Revert "crypto:
pkcs7 - remove sha1 support""). However, dropping only the support for
using SHA-1 for module signing is unrelated and can still be done
separately.
Note that this change only removes support for new modules to be SHA-1
signed, but already signed modules can still be loaded.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Switch to using system_dfl_wq, the new unbound workqueue, because the
users do not benefit from a per-cpu workqueue.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
Currently, when in-kernel module decompression (CONFIG_MODULE_DECOMPRESS)
is enabled, IMA has no way to verify the appended module signature as it
can't decompress the module.
Define a new kernel_read_file_id enumerate READING_MODULE_COMPRESSED so
IMA can calculate the compressed kernel module data hash on
READING_MODULE_COMPRESSED and defer appraising/measuring it until on
READING_MODULE when the module has been decompressed.
Before enabling in-kernel module decompression, a kernel module in
initramfs can still be loaded with ima_policy=secure_boot. So adjust the
kernel module rule in secure_boot policy to allow either an IMA
signature OR an appended signature i.e. to use
"appraise func=MODULE_CHECK appraise_type=imasig|modsig".
Reported-by: Karel Srot <ksrot@redhat.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The TAINT_RANDSTRUCT and TAINT_FWCTL flags are mistakenly set in the
taint_flags table as per-module flags. While this can be trivially
corrected, the issue can be avoided altogether by removing the
taint_flag.module field.
This is possible because, since commit 7fd8329ba5 ("taint/module: Clean
up global and module taint flags handling") in 2016, the handling of
module taint flags has been fully generic. Specifically,
module_flags_taint() can print all flags, and the required output buffer
size is properly defined in terms of TAINT_FLAGS_COUNT. The actual
per-module flags are always those added to module.taints by calls to
add_taint_module().
Link: https://lkml.kernel.org/r/20251022082938.26670-1-petr.pavlu@suse.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kernel's CFI implementation uses the KCFI ABI specifically, and is
not strictly tied to a particular compiler. In preparation for GCC
supporting KCFI, rename CONFIG_CFI_CLANG to CONFIG_CFI (along with
associated options).
Use new "transitional" Kconfig option for old CONFIG_CFI_CLANG that will
enable CONFIG_CFI during olddefconfig.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Pull more MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "mseal cleanups" (Lorenzo Stoakes)
Some mseal cleaning with no intended functional change.
- "Optimizations for khugepaged" (David Hildenbrand)
Improve khugepaged throughput by batching PTE operations for large
folios. This gain is mainly for arm64.
- "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes" (Mike Rapoport)
A bugfix, additional debug code and cleanups to the execmem code.
- "mm/shmem, swap: bugfix and improvement of mTHP swap in" (Kairui Song)
Bugfixes, cleanups and performance improvememnts to the mTHP swapin
code"
* tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (38 commits)
mm: mempool: fix crash in mempool_free() for zero-minimum pools
mm: correct type for vmalloc vm_flags fields
mm/shmem, swap: fix major fault counting
mm/shmem, swap: rework swap entry and index calculation for large swapin
mm/shmem, swap: simplify swapin path and result handling
mm/shmem, swap: never use swap cache and readahead for SWP_SYNCHRONOUS_IO
mm/shmem, swap: tidy up swap entry splitting
mm/shmem, swap: tidy up THP swapin checks
mm/shmem, swap: avoid redundant Xarray lookup during swapin
x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations
x86/kprobes: enable EXECMEM_ROX_CACHE for kprobes allocations
execmem: drop writable parameter from execmem_fill_trapping_insns()
execmem: add fallback for failures in vmalloc(VM_ALLOW_HUGE_VMAP)
execmem: move execmem_force_rw() and execmem_restore_rox() before use
execmem: rework execmem_cache_free()
execmem: introduce execmem_alloc_rw()
execmem: drop unused execmem_update_copy()
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
mm/rmap: add anon_vma lifetime debug check
mm: remove mm/io-mapping.c
...
The variable last_unloaded_module::name tracks the name of the last
unloaded module. It is a string copy of module::name, which is
MODULE_NAME_LEN bytes in size and includes the NUL terminator. Therefore,
the size of last_unloaded_module::name can also be just MODULE_NAME_LEN,
without the need for an extra byte.
Fixes: e14af7eeb4 ("debug: track and print last unloaded module in the oops trace")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-3-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Passing a module name longer than MODULE_NAME_LEN to the delete_module
syscall results in its silent truncation. This really isn't much of
a problem in practice, but it could theoretically lead to the removal of an
incorrect module. It is more sensible to return ENAMETOOLONG or ENOENT in
such a case.
Update the syscall to return ENOENT, as documented in the delete_module(2)
man page to mean "No module by that name exists." This is appropriate
because a module with a name longer than MODULE_NAME_LEN cannot be loaded
in the first place.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Pull ftrace updates from Steven Rostedt:
- Keep track of when fgraph_ops are registered or not
Keep accounting of when fgraph_ops are registered as if a fgraph_ops
is registered twice it can mess up the accounting and it will not
work as expected later. Trigger a warning if something registers it
twice as to catch bugs before they are found by things just not
working as expected.
- Make DYNAMIC_FTRACE always enabled for architectures that support it
As static ftrace (where all functions are always traced) is very
expensive and only exists to help architectures support ftrace, do
not make it an option. As soon as an architecture supports
DYNAMIC_FTRACE make it use it. This simplifies the code.
- Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it
redundant with the HAVE_DYNAMIC_FTRACE.
- Make pid_ptr string size match the comment
In print_graph_proc() the pid_ptr string is of size 11, but the
comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12.
* tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it
fgraph: Keep track of when fgraph_ops are registered or not
fgraph: Make pid_str size match the comment
Pull sysctl updates from Joel Granados:
- Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective
subsystems. Only 5 (out of the original 50) will remain in
kernel/sysctl.c file; these handle either sysctl or common arch
variables.
By decentralizing sysctl registrations, subsystem maintainers regain
control over their sysctl interfaces, improving maintainability and
reducing the likelihood of merge conflicts.
- docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented
in the check-sysctl-docs script. This script can now be used to
automatically identify if documentation is missing.
* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
docs: Downgrade arm64 & riscv from titles to comment
docs: Replace spaces with tabs in check-sysctl-docs
docs: Remove colon from ctltable title in vm.rst
docs: Add awk section for ucount sysctl entries
docs: Use skiplist when checking sysctl admin-guide
docs: nixify check-sysctl-docs
sysctl: rename kern_table -> sysctl_subsys_table
kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
uevent: mv uevent_helper into kobject_uevent.c
sysctl: Removed unused variable
sysctl: Nixify sysctl.sh
sysctl: Remove superfluous includes from kernel/sysctl.c
sysctl: Remove (very) old file changelog
sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
sysctl: move cad_pid into kernel/pid.c
sysctl: Move tainted ctl_table into kernel/panic.c
Input: sysrq: mv sysrq into drivers/tty/sysrq.c
fork: mv threads-max into kernel/fork.c
parisc/power: Move soft-power into power.c
mm: move randomize_va_space into memory.c
...
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Pull audit update from Paul Moore:
"A single audit patch that restores logging of an audit event in the
module load failure case"
* tag 'audit-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit,module: restore audit logging in load failure case
Move module sysctl (modprobe_path and modules_disabled) out of sysctl.c
and into the modules subsystem. Make modules_disabled static as it no
longer needs to be exported. Remove module.h from the includes in sysctl
as it no longer uses any module exported variables.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Ftrace is tightly coupled with architecture specific code because it
requires the use of trampolines written in assembly. This means that when
a new feature or optimization is made, it must be done for all
architectures. To simplify the approach, CONFIG_HAVE_FTRACE_* configs are
added to denote which architecture has the new enhancement so that other
architectures can still function until they too have been updated.
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant
with the HAVE_DYNAMIC_FTRACE.
Remove the HAVE_FTRACE_MCOUNT config and use DYNAMIC_FTRACE directly where
applicable.
Link: https://lore.kernel.org/all/20250703154916.48e3ada7@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250704104838.27a18690@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per-CPU data section is handled differently than the other sections.
The memory allocations requires a special __percpu pointer and then the
section is copied into the view of each CPU. Therefore the SHF_ALLOC
flag is removed to ensure move_module() skips it.
Later, relocations are applied and apply_relocations() skips sections
without SHF_ALLOC because they have not been copied. This also skips the
per-CPU data section.
The missing relocations result in a NULL pointer on x86-64 and very
small values on x86-32. This results in a crash because it is not
skipped like NULL pointer would and can't be dereferenced.
Such an assignment happens during static per-CPU lock initialisation
with lockdep enabled.
Allow relocation processing for the per-CPU section even if SHF_ALLOC is
missing.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202506041623.e45e4f7d-lkp@intel.com
Fixes: 1a6100caae425 ("Don't relocate non-allocated regions in modules.") #v2.6.1-rc3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20250610163328.URcsSUC1@linutronix.de
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250610163328.URcsSUC1@linutronix.de>
The function move_module() uses the variable t to track how many memory
types it has allocated and consequently how many should be freed if an
error occurs.
The variable is initially set to 0 and is updated when a call to
module_memory_alloc() fails. However, move_module() can fail for other
reasons as well, in which case t remains set to 0 and no memory is freed.
Fix the problem by initializing t to MOD_MEM_NUM_TYPES. Additionally, make
the deallocation loop more robust by not relying on the mod_mem_type_t enum
having a signed integer as its underlying type.
Fixes: c7ee8aebf6 ("module: add stop-grap sanity check on module memcpy()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250618122730.51324-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Message-ID: <20250618122730.51324-2-petr.pavlu@suse.com>
