DRM Rust changes for v7.3-rc1
- I/O (shared from driver-core tree via signed tag rust-io-7.3-rc1):
- Rework of I/O types: make I/O regions typed (with a
dynamically-sized Region type for the existing untyped case), create
view types representing subregions of a mapped I/O region, and add
io_project!() for safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io) with
a blanket implementation, preventing implementers from overriding
provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile access,
and make Coherent implement Io via an I/O view type. Add copying
methods (memcpy_{from,to}io).
- Replace dma_read!/dma_write! with io_read!/io_write!; drop the old
macros.
- DRM:
- RegistrationGuard and RegistrationData:
- Rework DeviceContext typestates: rename Uninit to Normal, add an
Ioctl context, restrict AlwaysRefCounted to Normal for both Device
and GEM Object, and establish a Deref chain from Registered to
Normal.
- Introduce RegistrationGuard, a guard representing a
drm_dev_enter/exit SRCU critical section that proves the DRM
device is registered, which implies the parent bus device is still
bound.
- Add RegistrationData as a GAT on drm::Driver. The data does not
outlive driver unbind, so it can capture lifetime-annotated device
resources and references. Accessible through the guard via a
closure with HRTB lifetime.
- Wrap ioctl dispatch in RegistrationGuard (returning ENODEV if
unplugged) and pass registration data to handlers.
- Add Driver::ParentDevice associated type.
- Fix unbounded lifetimes in ioctl handler arguments.
- Fix a race in drm_dev_register() where a partial failure allowed
in-flight ioctls to proceed while the error path tore down
resources.
- GEM shmem: add DmaResvGuard helper, vmap functions, and sg_table()
accessor.
- GPUVM: require Send + Sync for the driver's associated data,
implement Send and Sync for GpuVaAlloc and GpuVmBo, add SmContext
lifetime bound, update DriverGpuVm for DeviceContext.
- Nova:
- nova-core / nova-drm cross-crate dependency:
- Build nova-core and nova-drm from drivers/gpu/Makefile for build
ordering, export nova-core Rust symbols for nova-drm. Workaround
until the build system supports Rust cross-crate dependencies
natively.
- GSP boot process consolidation:
- Introduce GspBootContext to bundle common boot parameters,
replacing per-argument threading. Separate context and GPU
lifetimes to support mutable borrows of GPU subdevices.
- Turn FWSEC execution into a HAL method, make FWSEC bootloader
usage a property of the TU102 HAL (GA102+ gets its own instance
with it disabled). Move firmware file selection to the GSP HAL.
- Store the Fsp instance in Gpu (lifetime tied to the GPU, not just
a single boot invocation). Move GSP state and unload bundle into a
pinned subobject for reliable teardown on partial init failure.
- Boot GSP with vGPU enabled:
- Add PRC (Product Reconfiguration Control) protocol to query device
configuration from the FSP. Read vGPU mode, detect and store vGPU
state.
- Set RMSetSriovMode registry entry and reserve the larger WPR2 heap
required when vGPU is enabled.
- Build SetRegistry entries dynamically.
- TLV firmware image format:
- Add a TLV (type-length-value) parser for the new firmware image
format. TLV files use unversioned filenames with a .tlv suffix,
start with "NVFW" magic, and contain tagged blocks with 4-byte
aligned payloads.
- Transition all firmware loading (booter, gsp, gen_bootloader, fsp)
to TLV images.
- Note: this requires a development firmware not in linux-firmware
[1]; this is temporary and serves the transition to r615.
- Hopper/Blackwell fixes and cleanups:
- Correct FRTS vidmem offset calculation, split FbLayout into FSP
and non-FSP versions, fix Blackwell flush address composition, use
absolute FBHUB0 flush registers on Blackwell, use correct sysmem
flush registers on Hopper.
- Harden FSP messaging: limit receive allocation size, catch bogus
queue pointers, ensure DMA allocation lifetimes for FMC boot and
LibOS, wait for RISC-V HALTED on unload.
- I/O projection adoption:
- Use io_project!() for PTE array, message queues, and Falcon DMA
transfer bounds checking.
- Misc:
- Keep unloading if FWSEC-SB fails during Turing/Ampere GSP reset.
- Don't declare booter firmware for FSP chipsets.
- Fix packed registry table size.
- Extract and display usable FB regions from GSP.
- Store bar and dev directly in Falcon, simplifying the API.
- Parse VBIOS structs via zerocopy.
- Convert to kernel bitfield macro, remove local one.
- Move register definitions into sub-modules.
- Add FSP and PRC protocol documentation.
- Tyr:
- Firmware loading and MCU boot:
- Add a generic slot manager for dynamically allocating limited
hardware slots to software seats, with lazy eviction under
contention.
- Add MMU support wrapping the slot manager for address-space slot
allocation, with MAIR-to-MEMATTR translation.
- Add GPU virtual memory (VM) support using drm_gpuvm with ARM64
LPAE Stage 1 page tables and 4KB/2MB page sizes.
- Add a kernel buffer object type for internal driver allocations.
- Add a parser for the Mali CSF firmware binary format.
- Add MCU booting: load, parse, and map firmware sections into VM,
then boot the MCU at probe().
- Cross-subsystem:
- Add faux::Device type with AsBusDevice support. Allow retrieving a
bound Device from a Registration.
- Add device lifetime to IoPageTable.
- Add Vec::zeroed method.
- Add firmware::request_into_buf() to load firmware into a
caller-provided buffer.
- Rename dma_handle to dma_address in the DMA abstraction.
- Change pci_sriov_get_totalvfs() return type to unsigned int; add
Rust helper.
[1] https://github.com/ttabi/linux-firmware-nova
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DKJQQUOS0PVO.3JPR3MYK4PDVZ@kernel.org
TLV (type, length, value) files are the new image format used by Nova
to encapsulate firmware images and their metadata. Unlike the firmware
files for previous versions of the firmware, TLV filenames are not
versioned, and they have a .tlv suffix.
Add function request_tlv() to load TLV firmware images.
Add the Tlv struct and supporting types for parsing TLV firmware images.
TLV files begin with a 4-byte magic header, which must be "NVFW" for
Nvidia firmware files. This is followed by a sequence of blocks each
containing a 4-byte ASCII tag, a 4-byte little-endian length, and a
payload padded to a 4-byte boundary.
Tlv::new() validates the entire image up front, so that the iterator can
subsequently yield blocks without fallible parsing.
Also add accessor methods for the various encoded types that will be used
by the driver.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260731201017.2580713-4-ttabi@nvidia.com
[ Drop unnecessary payload.is_empty() check in Tlv::new(), use EINVAL
instead of ENODATA in Tlv::get_bytes() and add a corresponding TODO
comment. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Backmerge to pull in commit 21fcb222f0 ("drm: Remove DRIVER_GEM_GPUVA
feature flag"), which a Tyr patch series depends on.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add a sysfs interface that reports the current GPU health state and
lets admin users and management tools update it but is readable by all
users. Requests are routed through the sysctrl mailbox. The interface
is present only on platforms that support the GPU health indicator.
The interface is a single read/write file at the device level:
$ cat /sys/.../device/gpu_health
ok
$ echo critical > /sys/.../device/gpu_health
$ cat /sys/.../device/gpu_health
critical
Signed-off-by: Soham Purkait <soham.purkait@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patch.msgid.link/20260716073600.674089-4-soham.purkait@intel.com
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Add kernel-doc references for amdgpu_display.c to the display manager
documentation. This pulls in documentation for display core functions
like the hotplug work handler, and the adaptive backlight modulation
property.
The :internal: directive automatically includes all function documentation,
while the explicit :doc: directive captures the property documentation that
:internal: doesn't pull in.
Fixes: 1454642960 ("drm/amd: Re-introduce property to control adaptive backlight modulation")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Link: https://patch.msgid.link/20260701170004.465737-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge v7.2-rc1 into drm-rust-next to start the next cycle.
Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>> without that bound. Resolve by adding 'static
as a supertrait to DriverObject and DeviceContext, which does not
restrict any current use cases since DriverObject is always implemented
on owned, refcounted types and DeviceContext is a sealed marker trait
with only unit-type implementors.
If DriverObject (or DeviceContext) ever becomes lifetime-parameterized
(e.g. via a GAT for TTM backed objects), the 'static supertrait can be
relaxed at that point.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add documentation for the Foundation Security Processor (FSP) interface
covering the simplified Hopper/Blackwell boot flow, the Chain of Trust
(COT) message protocol, the MCTP/NVDM message format, and the Product
Reconfiguration Control (PRC) protocol used to query device configuration
knobs such as vGPU mode.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Link: https://patch.msgid.link/20260604114339.1565660-6-zhiw@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Pull drm updates from Dave Airlie:
"Highlights:
- xe: add initial CRI platform support
- amdgpu: initial HDMI 2.1 FRL support
- rust: add some new type concepts for device lifetimes
- scheduler: moves to a fair algorithm and lots of cleanups
But it's mostly the usual mountain of changes across the board.
core:
- add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD
- change signature of drm_connector_attach_hdr_output_metadata_property
- dedup counter and timestamp retrieval in vblank code
- parse AMD VSDB v3 in CTA extension blocks
- add P230, Y7, XYYY2101010, T430, XVUY210101010 formats
- don't call drop master on file close if not master
- use drm_printf_indent in atomic / bridge
- fix 32b format descriptions
- docs: fix toctree
- hdmi: add common TMDS character rates
- fix drm_syncobj_find_fence leak
rust:
- introduce Higher-Ranked lifetime types
- replace drvdata with scoped registration data
- add GPUVM immediate mode abstraction for rust GPU drivers
- introduce DeviceContext type state for drm::Device
bridge:
- clarify drm_bridge_get/put
- create drm_get_bridge_by_endpoint and use it
- analogix_dp: add panel probing
- ite-it6211 - use drm audio hdmi helpers
buddy:
- add lockdep annotations
dp:
- add PR and VRR updates
- mst: fix buffer overflows
- add Adaptive Sync SDP decoding support
- fix OOB reads in dp-mst
ttm:
- bump fpfn/lpfn to 64-bit
scheduler:
- change default to fair scheduler
- map runqueue 1:1 with scheduler
dma-buf:
- port selftests to kunit
- convert dma-buf system/heap allocators to module
- add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig
udmabuf:
- revert hugetlb support
- fix error with CONFIG_DMA_API_DEBUG
dma-fence:
- fix tracepoints lifetime
- remove unused signal on any support
ras:
- add clear error counter netlink command to drm ras
gpusvm:
- reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- use IOVA allocations
pagemap:
- use IOVA allocations
panels:
- update to use ref counts
- add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1
- add support for waveshare panels
- CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5,
- IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F,
- AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels
- Surface Pro 12 Panel
xe:
- add CRI PCI-IDs
- debugfs add multi-lrc info
- engine init cleanup
- PF fair scheduling auto provisioning
- system controller support for CRI/Xe3p
- PXP state machine fixes
- Reset/wedge/unload corner case fixes
- Wedge path memory allocation fixes
- PAT type cleanups
- Reject unsafe PAT for CPU cached memory
- OA improvements for CRI device memory
- kernel doc syntax in xe headers
- xe_drm.h documentation fixes
- include guard cleanups
- VF CCS memory pool
- i915/xe step unification
- Xe3p GT tuning fixes
- forcewake cleanup in GT and GuC
- admin-only PF mode
- enable hwmon energy attributes for CRI
- enable GT_MI_USER_INTERRUPT
- refactor emit functions
- oa workarounds
- multi_queue: allow QUEUE_TIMESTAMP register
- convert stolen memory to ttm range manager
- use xe2 style blitter as a feature flag
- make drm_driver const
- add/use IRQ page to HW engine definition
- fix oops when display disabled
i915:
- enable PIPEDMC_ERROR interrupt
- more common display code refactoring
- restructure DP/HDMI sink format handling
- eliminate FB usage from lowlevel pinning code
- panel replay bw optimization
- integrate sharpness filter into the scaler
- new fb_pin abstraction for xe/i915 fb transparent handling
- skip inactive MST connectors on HDCP
- start switching to display specific registers
- use polling when irq unavailable
- Adaptive-sync SDP prep
amdgpu:
- use drm_display_info for AMD VSDB data
- Initial HDMI 2.1 FRL support
- Initial DCN 4.2.1 support
- GART fixes for non-4k pages
- GC 11.5.6/SDMA 6.4.0/and other new IPs
- GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes
- Finish support for using multiple SDMA queues for TTM operations
- SWSMU updates
- GC 12.1 updates
- SMU 15.0.8 updates
- DCN 4.2 updates
- DC type conversion fixes
- Enable DC power module
- Replay/PSR updates
- SMU 13.x updates
- Compute queue quantum MQD updates
- ASPM fix
- Align VKMS with common implementation
- DC analog support fixes
- UVD 3 fixes
- TCC harvesting fixes for SI
- GC 11 APU module reload fix
- NBIO 6.3.2 support
- IH 7.1 updates
- DC cursor fixes
- VCN/JPEG user fence fixes
- DC support for connectors without DDC
- Prefer ROM BAR for default VGA device
- DC bandwidth fixes
- Add PTL support for profiler
- Introduce dc_plane_cm and migrate surface update color path
- Add FRL registers for HDMI 2.1
- Restructure VM state machine
- Auxless ALPM support
- GEM_OP locking/warning fixes
- switch to system_dfl_wq
amdkfd:
- GPUVM TLB flush fix
- Hotplug fix
- Boundary check fixes
- SVM fixes
- CRIU fixes
- add profiler API
- MES 12.1 updates
msm:
- core:
- fix shrinker documentation
- IFPC enabled for gen8
- PERFCNTR_CONFIG ioctl support
- GPU:
- reworked UBWC handling
- a810 support
- MDSS:
- add support for Milos platform
- reworked UBWC handling
- DisplayPort:
- reworked HPD handling as prep for MST
- DPU:
- Milos platform support
- reworked UBWC handling
- DSI:
- Milos platform support
nova:
- Hopper/Blackwell enablement (GH100/GB100/GB202)
- FSP support
- 32-bit firmware support
- HAL functions
- refactor GSP boot/unload
- GA100 support
- VBIOS hardening/refactoring
- Adopt higher order lifetime types
tyr:
- define register blocks
- add shmem backed GEM objects
- adopt higher order lifetime types
- move clock cleanup into Drop
radeon:
- Hawaii SMU fixes
- CS parser fix
- use struct drm_edid instead of edid
amdxdna:
- export per-client BO memory via fdinfo
- AIE4 device support
- support medium/lower power modes
- expandable device heap support
- revert read-only user-pointer BO mappings
ivpu:
- support frequency limiting
panthor:
- enable GEM shrinker support
- add eviction and reclaim info to fdinfo
v3d:
- enable runtime PM
mgag200:
- support XRGB1555 + C8
ast:
- support XRGB1555 + C8
- use constants for lots of registers
- fix register handling
imagination:
- fence handling refactoring
nouveau:
- fix sched double call
- expose VBIOS on GSP-RM systems
- add GA100 support
virtio:
- add VIRTIO_GPU_F_BLOB_ALIGNMENT flag
- add deferred mapping support
gud:
- add RCade Display Adapter
hibmc:
- fix no connectors usage
mediatek:
- hdmi: convert error handling
- simplify mtk_crtc allocation
exynos:
- move fbdev emulation to drm client buffers
- use drm format helpers for geometry/size
- adopt core DMA tracking
- fix framebuffer offset handling
renesas:
- add RZ/T2H SOC support
versilicon:
- add cursor plane support
tegra:
- use drm client for framebuffer"
* tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits)
dma-buf: move system_cc_shared heap under separate Kconfig
accel/amdxdna: Clear sva pointer after unbind
agp/amd64: Fix broken error propagation in agp_amd64_probe()
accel/amdxdna: Require carveout when PASID and force_iova are disabled
drm/amdkfd: always resume_all after suspend_all
drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
drm/amd/pm: Use strscpy in profile mode parsing
drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length
drm/amdkfd: fix sysfs topology prop length on buffer truncation
drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages
drm/amd/pm: bound OD parameter parsing to stack array size
drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
drm/amdgpu: validate the mes firmware version for gfx12.1
drm/amdgpu: validate the mes firmware version for gfx12
drm/amdgpu: compare MES firmware version ucode for gfx11
drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS
drm/amdgpu: restart the CS if some parts of the VM are still invalidated
drm/amd/display: use unsigned types for local pipe and REG_GET counters
...
The bridge chain format selection behaviour was, until now,
undocumented. With the addition of the "color format" DRM property, it's
not sufficiently complex enough that documentation is warranted,
especially for driver authors trying to do the right thing.
Add a high-level overview of how the process is supposed to work, and
mention what the display driver is supposed to do if it wants to make
use of this functionality.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-23-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add a new general DRM property named "color format" which can be used by
userspace to request the display driver to output a particular color
format.
Possible string values for the new enum property are:
- "AUTO" (setup by default, driver internally picks the color format)
- "RGB"
- "YUV 4:4:4"
- "YUV 4:2:2"
- "YUV 4:2:0"
Drivers should advertise from this list the formats they support in an
optimistic best-case scenario. EDID data from the sink can then be used
in the kernel's atomic check phase to restrict this set of formats, as
well as by userspace to make a correct choice in the first place.
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Co-developed-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-3-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add kernel-doc documentation describing the Intel DP link training
recovery state machine and the sequence of automatic retraining,
fallback selection, and userspace notification.
v2:
- Rebase on dedicated intel-display documentation change.
- Remove unnecessary indent in section bodies. (Jani)
- Add recovery flowcharts. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260601093836.3057345-23-imre.deak@intel.com
DRM Rust changes for v7.2-rc1
- Driver Core (shared via signed tag dd-lifetimes-7.2-rc1):
- Introduce Higher-Ranked Lifetime Types (HRT) for Rust device
drivers, allowing driver structs to hold device resources like
pci::Bar and IoMem directly with a lifetime tied to the binding
scope, removing the need for Devres indirection and ARef<Device>.
- Replace drvdata() with scoped registration data on the auxiliary
bus, using the new ForLt trait to thread lifetimes through
registrations. Remove drvdata() and driver_type.
- DRM:
- Add GPUVM immediate mode abstraction for Rust GPU drivers:
- In immediate mode, GPU virtual address space state is updated
during job execution (in the DMA fence signalling critical path),
keeping the GPUVM and the GPU's address space always in sync.
- Provide GpuVm, GpuVa, and GpuVmBo types for managing address
spaces, virtual mappings, and GEM object backing respectively.
- Provide split-merge map/unmap operations that handle partial
overlaps with existing mappings.
- drm_exec integration for dma_resv locking and GEM object
validation based on the external/evicted object lists are not
yet covered and planned as follow-up work.
- Introduce DeviceContext type state for drm::Device, allowing
drivers to restrict operations to contexts where the device is
guaranteed to be registered (or not yet registered) with userspace.
- Add FEAT_RENDER flag to the Driver trait for render node support.
- Nova:
- Hopper/Blackwell enablement:
- Add GPU identification and architecture-based HAL selection for
Hopper (GH100) and Blackwell (GB100, GB202).
- Implement the FSP (Foundation Security Processor) boot path used by
Hopper and Blackwell, including FSP falcon engine support, EMEM
operations, MCTP/NVDM message infrastructure, and FSP Chain of
Trust boot with GSP lockdown release.
- Add support for 32-bit firmware images and auto-detection of
firmware image format.
- Add architecture-specific framebuffer, sysmem flush, PCI config
mirror, DMA mask, and WPR/non-WPR heap sizing.
- GSP boot and unload:
- Refactor the GSP boot process into a chipset-specific HAL,
keeping the SEC2 and FSP boot paths separated cleanly.
- Implement proper driver unload: send UNLOADING_GUEST_DRIVER
command, run Booter Unloader and FWSEC-SB upon unbinding, and run
the unload bundle on Gsp::boot() failure. This removes the need
for a manual GPU reset between driver unbind and re-probe.
- GA100 support:
- Add support for the GA100 GPU, including IFR header detection and
skipping, correct fwsignature selection, conditional FRTS boot,
and documentation of the IFR header layout.
- VBIOS hardening and refactoring:
- Harden VBIOS parsing with checked arithmetic, bounds-checked
accesses, and FromBytes-based structure reads throughout the FWSEC
and Falcon data paths. Simplify the overall VBIOS module
structure.
- HRT adoption:
- Use lifetime-parameterized pci::Bar directly, replacing the
Arc<Devres<Bar0>> indirection. Replace ARef<Device> with &'bound
Device in SysmemFlush and the GSP sequencer. Separate the driver
type from driver data.
- Misc:
- Rename module names to kebab-case (nova-drm, nova-core).
- Require little-endian in Kconfig, making the existing assumption
explicit.
- Tyr:
- Define comprehensive typed register blocks for GPU_CONTROL,
JOB_CONTROL, MMU_CONTROL (including per-address-space registers),
and DOORBELL_BLOCK using the kernel register!() macro. This replaces
manual bit manipulation with typed register and field accessors.
- Add shmem-backed GEM objects and set DMA mask based on GPU physical
address width.
- Adopt HRT: separate driver type from driver data, and use IoMem
directly instead of Devres for register access during probe.
- Move clock cleanup into a Drop implementation.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DJ0IF39U9ETK.PCCUO7ZEQ4S0@kernel.org
Driver Changes:
- drm/xe: Move xe_uc_fw_abi.h to abi/ (Michal Wajdeczko)
- drm/xe: Restore IDLEDLY regiter on engine reset (Balasubramani Vivekanandan)
- drm/xe/pm: Do early initialization in init_early() (Michal Wajdeczko)
- drm/xe/pm: Don't access device in init_early() (Michal Wajdeczko)
- drm/xe: Separate early xe_device initialization (Michal Wajdeczko)
- drm/xe: Move xe->info.devid|revid initialization (Michal Wajdeczko)
- drm/xe: Move xe->info.force_execlist initialization (Michal Wajdeczko)
- drm/xe: Drop unused param from xe_device_create() (Michal Wajdeczko)
- drm/xe: Use raw device ID to find sub-platform descriptor (Michal Wajdeczko)
- drm/xe: Assign queue name in time for drm_sched_init (Tvrtko Ursulin)
- drm/xe/rtp: Implement a structured parser for rule matching (Gustavo Sousa)
- drm/xe/rtp: Fully parse the ruleset (Gustavo Sousa)
- drm/xe/rtp: Extract rule_match_item() (Gustavo Sousa)
- drm/xe/rtp: Do not break parsing when missing context (Gustavo Sousa)
- drm/xe/rtp: Don't short-circuit to false in or-yes case (Gustavo Sousa)
- drm/xe/rtp: Drop rule matching cases from rtp_to_sr_cases and rtp_cases (Gustavo Sousa)
- drm/xe/rtp: Write kunit test cases specific for rule matching (Gustavo Sousa)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/ahg7tgWh8djEngjM@fedora
Backmerge to pull in commit 838d852da8 ("rust: allow
`clippy::collapsible_match` globally"), in order to get rid of spurious
warnings messing with developer tooling.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
- A Revert of a Kconfig patch that broke some builds (Jani)
- New fb_pin abstraction for xe and i915 fb transparent handling (Ville, Tvrtko)
- Skip inactive MST connectors on HDCP cases (Suraj)
- Reduce redundant intel_panel_fixed_mode (Ankit)
- Some general fixes (Imre, Chaitanya)
- Reorganize display documentation (Jani)
- Start switching to display specific reg types (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/agXbLMtMECnKy-YV@intel.com
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Update fourcc descriptions of BG(R) floating formats.
- Add deferred mapping support to virtio.
Cross-subsystem Changes:
- Update lontium lt9211 bindings.
Core Changes:
- Bugfixes and cleanups to pagemap, dp/mst.
- Add lockdep annotations to gpu buddy manager.
- Updates to drm/dp for PR + VRR.
- Improve documentation's table of contents.
- Bump fpfn and lpfn in ttm to 64-bits.
Driver Changes:
- Assorted bugfixes, cleanups and updates to panthor, nouveau, qaic,
hisilicon.
- Add support for CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, IVO
R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels.
- More implementation of AIE4 in amdxdna.
- Update panels to use refcounts instead of devm_kzalloc to make
drm_panel_init static.
- Add support for the RCade Display Adapter to gud.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/98788814-e462-4950-bb2a-ea493c30d0c0@linux.intel.com
Some of the GPU documentation pages are quite long, with various levels
of details. Add document internal tables of contents to the larger
documents to make them easier to navigate.
The index.rst in the sub-directories have toctrees, which provide
similar overviews.
Fix one missing newline at the end of drm-uapi.rst while at it,
primarily because rst should have it, and secondarily because my editor
rst mode refuses to save the file without it.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/e3f9357c0e8198cc48e69e2a3b8ca072c7ab92ca.1778238671.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The PTL (Peak Tops Limiter) feature exposes per-GPU sysfs files under
/sys/class/drm/cardX/device/ptl/ to allow users to enable or disable PTL,
configure preferred data formats, and query supported formats. The usage
of these sysfs files is not always obvious, so add documentation to
describe their purpose and provide concrete usage examples.
V3 changes:
* format show will display preferred formats instead of N/A (Alex)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nowadays, the display support for drm/i915 and drm/xe is shared between
the drivers, even though the code is located under drm/i915/display.
The drm/i915 documentation has everything, including display topics, in
one huge page, while the drm/xe documentation is well-organized but
hardly mentions display. It's not great, to put it mildly.
Split out the Intel display documentation to a dedicated directory,
Documentation/gpu/intel-display. Also directly split the
functionality/feature documentation to dedicated pages to keep the main
index page high level and readable. We'll want to organize this further,
but just sort them alphabetically for starters.
Drop the boilerplate documentation sections that don't actually document
anything.
Cross-reference drm/i915, drm/xe, and intel-display.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/21bfa7777eb0926eadd309d4c6f5c9cf48405cf0.1778235406.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
UAPI Changes:
- Debugfs multi-LRC engine info (Xin Wang, 2 commits)
Expose multi-LRC engine classes in the debugfs engine info output
and improve the output readability.
- drm/drm_ras: Add clear-error-counter netlink command to drm_ras
Cross-subsystem Changes:
Core Changes:
- drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- drm/i915/display: switch to including common step file directly
Driver Changes:
- Engine initialization cleanup (Matt Roper, 10 commits)
Clean up engine initialization code inherited from i915 by moving
hardware programming (CCS enablement, HWSTAM, GFX_MODE, BLIT_CCTL,
STOP_RING) into the RTP infrastructure. This makes the programming
visible and verifiable via debugfs, and applies consistently across
both normal and execlist init paths. Also fixes the name/definition
of GFX_MODE, marks BCS engines as belonging to the GT forcewake
domain, and drops the now-unused xe_hw_engine_mmio_write32() helper.
- PF fair scheduling auto-provisioning (Michal Wajdeczko, 13 commits)
Fix several corner cases in SR-IOV PF scheduling policy provisioning,
then auto-provision PF and all VFs with 16ms execution-quantum and
preemption-timeout defaults. This prevents a VF from monopolizing
the GPU by submitting workloads without gaps, without requiring the
user to configure sysfs manually.
- System Controller support for CRI/Xe3p (Anoop Vijay + Raag Jadav, 10 commits)
Add xe_sysctrl infrastructure for communicating with the System
Controller firmware entity on CRI/Xe3p discrete GPU platforms via a
mailbox interface. Includes type definitions, register definitions,
mailbox communication, initialization, power management, interrupt
handling, and event dispatch. Builds on this to add initial RAS
correctable error handling, using sysctrl interrupts to receive
threshold-crossed events.
- PXP state machine fixes (Daniele Ceraolo Spurio, 4 commits)
Fix PXP state machine handling: reject PXP sessions on PTL platforms
with older GSC firmware that does not support it, fix the restart
flag not being cleared after jumping back in pxp_start, remove
incorrect handling of an impossible state during suspend, and clean
up termination status on failure.
- Reset/wedge/unload corner case fixes (Zhanjun Dong + Matthew Brost, 5 commits)
Fix memory leaks and fence signal failures that occurred during GPU
reset, device wedging, and driver unload by forcefully tearing down
remaining exec queues in GuC submit fini, always killing queues in
pause/abort, and triggering queue cleanup when not in wedged mode 2.
Also ensures GuC CT state transitions via STOP before DISABLED.
- Wedge path memory allocation fixes (Matthew Brost, 3 commits)
Avoid GFP_KERNEL allocations in xe_device_declare_wedged(), which
runs in the DMA-fence signaling path. Also drops the
guc_submit_wedged_fini devm registration from xe_guc_submit_wedge()
to clean up the wedge shutdown sequence.
- PAT type cleanup and invalid index hardening (Xin Wang, 3 commits)
Standardize pat_index fields to u16 across the driver, default
XE_CACHE_NONE_COMPRESSION to XE_PAT_INVALID_IDX (matching
WB_COMPRESSION), and introduce xe_cache_pat_idx() — a macro helper
that validates cache_mode bounds and asserts on invalid PAT indices
before returning the index.
- Reject unsafe PAT indices for CPU cached memory (Jia Yao, 2 commits)
Reject incoherent (coh_none) PAT indices for CPU cached memory in
both the madvise ioctl and vm_bind with CPU_ADDR_MIRROR flag, closing
a security gap where the GPU could bypass CPU caches and observe
stale or sensitive data.
- OA improvements for CRI device memory (Ashutosh Dixit, 3 commits)
Move OA buffer access to the xe_map layer to support both system and
device memory (required for CRI), switch OA buffer mmap to use
drm_gem_mmap_obj, and implement workaround Wa_14026633728.
- xe_drm.h documentation fixes (Shuicheng Lin, 6 commits)
Fix multiple documentation issues in the xe_drm.h UAPI header:
typos, spelling errors, grammar, wrong names and references,
kernel-doc cross-reference syntax, and broken code examples.
- kernel-doc syntax fixes in xe headers (Shuicheng Lin, 4 commits)
Fix kernel-doc syntax issues across xe header files: missing '@'
prefixes on member tags, stale/mismatched member tags, comment
syntax errors, and type/parameter name mismatches in references.
- Buffer object and DMA-buf resource leak fixes (Shuicheng Lin, 4 commits)
Fix resource leaks on error paths: DMA-buf attachment leak in
xe_gem_prime_import(), BO leak in xe_dma_buf_init_obj() on
allocation failure, and BO leaks in xe_bo_init_locked() on GGTT
flag validation and unaligned size validation failures.
- Include guard cleanup (Shuicheng Lin, 5 commits)
Fix and standardize include guards across xe header files: normalize
double-underscore guards to single, add missing leading/trailing
underscores, add missing _H suffixes, and add guards to previously
unprotected headers.
- VF CCS memory pool (Satyanarayana K V P, 2 commits)
Switch VF CCS read/write operations from the DRM sub-allocator to
DRM mm, fixing allocation failures in fence-disabled mode where
the sub-allocator's hole cursor assumption breaks. Also introduces
a general BO-backed memory pool with shadow support using drm_mm.
- i915/xe step definition unification (Jani Nikula, 3 commits)
Complete the migration to the shared intel_step header: switch xe
from its own xe_step enum to the shared intel_step naming and
definitions, and update i915 display code to include the common
step header directly.
- Xe3p GT tuning fixes (3 commits)
Three Xe3p GT tuning corrections: fix the register offset for
GAMSTLB_CTRL, stop applying the CCCHKNREG1 tuning from Xe3p onward
(no longer needed), and mark ROW_CHICKEN5 as a masked register.
- Forcewake cleanup in GT and GuC PC (Raag Jadav, 3 commits)
Drop a redundant forcewake reference in xe_gt, reorder forcewake
usage in xe_guc_pc_fini_hw() to avoid a redundant hold, and convert
xe_guc_pc_stop() to void since it can no longer fail.
- SVM garbage collector fix on close (Matthew Brost, 2 commits)
Disable the SVM garbage collector work item when an SVM is closed
to prevent use-after-free when the GC fires after the SVM is freed.
- Admin-only PF mode (Satyanarayana K V P, 2 commits)
Derive an "admin-only PF" mode flag from xe_device state instead of
using a local flag, and restrict device query responses when running
in admin-only PF mode to avoid exposing internal state.
- Enable hwmon energy attributes and accepted power limit for CRI (2 commits)
Enable energy consumption hwmon attributes for the CRI platform and
add support for reading the accepted (sustained) power limit via
hwmon.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/afNSeZJHC3X2m3-N@fedora
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
Init-from-ROM (IFR) is a special GPU feature used for power management
on some Nvidia GPUs. It references data in the VBIOS for its operation,
but for drivers the important piece is the header that precedes the
VBIOS PCI Expansion ROM. Parsing VBIOS is necessary to boot GSP-RM on
Turing, Ampere, and Ada GPUs.
Most such GPUs do not need to parse the IFR header in order to find the
VBIOS, but the Nvidia GA100 is the exception. GA100 lacks a display
engine, so the PRAMIN method (which reads the VBIOS from VRAM via
display hardware) is unavailable, forcing the driver to read the ROM
directly via PROM. On other similar GPUs, either PRAMIN succeeds before
PROM is tried, or the IFR hardware has already applied the ROM offset
so that PROM reads transparently skip the IFR header.
Note that GH100 also does not have a display engine, but it uses a
completely different method to boot GSP-RM.
This information is derived from NVIDIA's open-source GPU kernel module
driver (aka OpenRM), specifically the NV_PBUS_IFR_FMT_FIXEDx definitions
in dev_bus.h and the parsing logic in s_romImgFindPciHeader_TU102().
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://patch.msgid.link/20260408142132.3911466-1-ttabi@nvidia.com
[acourbot: fix TOTAL_DATA_SIZE definition.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
These are the L2 and L1 cache on some AMD GPU architectures.
Add them to the glossary, keeping existing alphabetical order.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement amdxdna_show_fdinfo() to report per-client memory usage,
including below driver-specific memory stat:
- heap allocation
- internal BO allocation
- external BO allocation
Hook the implementation into the DRM fdinfo infrastructure via
drm_driver.show_fdinfo, while continuing to expose standard DRM
memory stat through drm_show_memory_stats().
This improves observability of per-process memory usage and aligns
with existing fdinfo reporting mechanisms used by other drivers.
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260409152259.176883-1-lizhi.hou@amd.com
