Pull misc mm fixes from Andrew Morton:
"12 hotfixes.
Two are cc:stable and the remainder either address post-6.7 issues or
aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: shrinker: use kvzalloc_node() from expand_one_shrinker_info()
mailmap: add entries for Mathieu Othacehe
MAINTAINERS: change vmware.com addresses to broadcom.com
arch/mm/fault: fix major fault accounting when retrying under per-VMA lock
mm/mglru: skip special VMAs in lru_gen_look_around()
MAINTAINERS: hand over hwpoison maintainership to Miaohe Lin
MAINTAINERS: remove hugetlb maintainer Mike Kravetz
mm: fix unmap_mapping_range high bits shift bug
mm: memcg: fix split queue list crash when large folio migration
mm: fix arithmetic for max_prop_frac when setting max_ratio
mm: fix arithmetic for bdi min_ratio
mm: align larger anonymous mappings on THP boundaries
Pull ARM SoC fixes from Arnd Bergmann:
"These are two correctness fixes for handing DT input in the
Allwinner (sunxi) SMP startup code"
* tag 'soc-fixes-6.7-3a' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: sun9i: smp: fix return code check of of_property_match_string
ARM: sun9i: smp: Fix array-index-out-of-bounds read in sunxi_mc_smp_init
Pull kvm fix from Paolo Bonzini:
- Fix boolean logic in intel_guest_get_msrs
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/pmu: fix masking logic for MSR_CORE_PERF_GLOBAL_CTRL
Pull kprobes/x86 fix from Masami Hiramatsu:
- Fix to emulate indirect call which size is not 5 byte.
Current code expects the indirect call instructions are 5 bytes, but
that is incorrect. Usually indirect call based on register is shorter
than that, thus the emulation causes a kernel crash by accessing
wrong instruction boundary. This uses the instruction size to
calculate the return address correctly.
* tag 'probes-fixes-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
x86/kprobes: fix incorrect return address calculation in kprobe_emulate_call_indirect
Commit 688eb8191b ("x86/csum: Improve performance of `csum_partial`")
ended up improving the code generation for the IP csum calculations, and
in particular special-casing the 40-byte case that is a hot case for
IPv6 headers.
It then had _another_ special case for the 64-byte unrolled loop, which
did two chains of 32-byte blocks, which allows modern CPU's to improve
performance by doing the chains in parallel thanks to renaming the carry
flag.
This just unifies the special cases and combines them into just one
single helper the 40-byte csum case, and replaces the 64-byte case by a
80-byte case that just does that single helper twice. It avoids having
all these different versions of inline assembly, and actually improved
performance further in my tests.
There was never anything magical about the 64-byte unrolled case, even
though it happens to be a common size (and typically is the cacheline
size).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The special case for odd aligned buffers is unnecessary and mostly
just adds overhead. Aligned buffers is the expectations, and even for
unaligned buffer, the only case that was helped is if the buffer was
1-byte from word aligned which is ~1/7 of the cases. Overall it seems
highly unlikely to be worth to extra branch.
It was left in the previous perf improvement patch because I was
erroneously comparing the exact output of `csum_partial(...)`, but
really we only need `csum_fold(csum_partial(...))` to match so its
safe to remove.
All csum kunit tests pass.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Laight <david.laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When commit c59a1f106f ("KVM: x86/pmu: Add IA32_PEBS_ENABLE
MSR emulation for extended PEBS") switched the initialization of
cpuc->guest_switch_msrs to use compound literals, it screwed up
the boolean logic:
+ u64 pebs_mask = cpuc->pebs_enabled & x86_pmu.pebs_capable;
...
- arr[0].guest = intel_ctrl & ~cpuc->intel_ctrl_host_mask;
- arr[0].guest &= ~(cpuc->pebs_enabled & x86_pmu.pebs_capable);
+ .guest = intel_ctrl & (~cpuc->intel_ctrl_host_mask | ~pebs_mask),
Before the patch, the value of arr[0].guest would have been intel_ctrl &
~cpuc->intel_ctrl_host_mask & ~pebs_mask. The intent is to always treat
PEBS events as host-only because, while the guest runs, there is no way
to tell the processor about the virtual address where to put PEBS records
intended for the host.
Unfortunately, the new expression can be expanded to
(intel_ctrl & ~cpuc->intel_ctrl_host_mask) | (intel_ctrl & ~pebs_mask)
which makes no sense; it includes any bit that isn't *both* marked as
exclude_guest and using PEBS. So, reinstate the old logic. Another
way to write it could be "intel_ctrl & ~(cpuc->intel_ctrl_host_mask |
pebs_mask)", presumably the intention of the author of the faulty.
However, I personally find the repeated application of A AND NOT B to
be a bit more readable.
This shows up as guest failures when running concurrent long-running
perf workloads on the host, and was reported to happen with rcutorture.
All guests on a given host would die simultaneously with something like an
instruction fault or a segmentation violation.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Analyzed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c59a1f106f ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Running a multi-arch kernel (multi_v7_defconfig) on a Raspberry Pi 3B+
with enabled CONFIG_UBSAN triggers the following warning:
UBSAN: array-index-out-of-bounds in arch/arm/mach-sunxi/mc_smp.c:810:29
index 2 is out of range for type 'sunxi_mc_smp_data [2]'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc6-00248-g5254c0cbc92d
Hardware name: BCM2835
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x40/0x4c
dump_stack_lvl from ubsan_epilogue+0x8/0x34
ubsan_epilogue from __ubsan_handle_out_of_bounds+0x78/0x80
__ubsan_handle_out_of_bounds from sunxi_mc_smp_init+0xe4/0x4cc
sunxi_mc_smp_init from do_one_initcall+0xa0/0x2fc
do_one_initcall from kernel_init_freeable+0xf4/0x2f4
kernel_init_freeable from kernel_init+0x18/0x158
kernel_init from ret_from_fork+0x14/0x28
Since the enabled method couldn't match with any entry from
sunxi_mc_smp_data, the value of the index shouldn't be used right after
the loop. So move it after the check of ret in order to have a valid
index.
Fixes: 1631090e34 ("ARM: sun9i: smp: Add is_a83t field")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231228193903.9078-1-wahrenst@gmx.net
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull misc fixes from Andrew Morton:
"11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
or are not considered backporting material"
* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add an old address for Naoya Horiguchi
mm/memory-failure: cast index to loff_t before shifting it
mm/memory-failure: check the mapcount of the precise page
mm/memory-failure: pass the folio and the page to collect_procs()
selftests: secretmem: floor the memory size to the multiple of page_size
mm: migrate high-order folios in swap cache correctly
maple_tree: do not preallocate nodes for slot stores
mm/filemap: avoid buffered read/write race to read inconsistent data
kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
kexec: fix KEXEC_FILE dependencies
Pull x86 fixes from Ingo Molnar:
- Fix a secondary CPUs enumeration regression caused by creative MADT
APIC table entries on certain systems.
- Fix a race in the NOP-patcher that can spuriously trigger crashes on
bootup.
- Fix a bootup failure regression caused by the parallel bringup code,
caused by firmware inconsistency between the APIC initialization
states of the boot and secondary CPUs, on certain systems.
* tag 'x86-urgent-2023-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi: Handle bogus MADT APIC tables gracefully
x86/alternatives: Disable interrupts and sync when optimizing NOPs in place
x86/alternatives: Sync core before enabling interrupts
x86/smpboot/64: Handle X2APIC BIOS inconsistency gracefully
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix a race condition in updating external interrupt for
trap-n-emulated IMSIC swfile
- Fix print_reg defaults in get-reg-list selftest
ARM:
- Ensure a vCPU's redistributor is unregistered from the MMIO bus if
vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
x86:
- Fix breakage for SEV-ES guests that use XSAVES
Selftests:
- Fix bad use of strcat(), by not using strcat() at all"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV: Do not intercept accesses to MSR_IA32_XSS for SEV-ES guests
KVM: selftests: Fix dynamic generation of configuration names
RISCV: KVM: update external interrupt atomically for IMSIC swfile
KVM: riscv: selftests: Fix get-reg-list print_reg defaults
KVM: selftests: Ensure sysreg-defs.h is generated at the expected path
KVM: Convert comment into an assertion in kvm_io_bus_register_dev()
KVM: arm64: vgic: Ensure that slots_lock is held in vgic_register_all_redist_iodevs()
KVM: arm64: vgic: Force vcpu vgic teardown on vcpu destroy
KVM: arm64: vgic: Add a non-locking primitive for kvm_vgic_vcpu_destroy()
KVM: arm64: vgic: Simplify kvm_vgic_destroy()
KVM/riscv fixes for 6.7, take #1
- Fix a race condition in updating external interrupt for
trap-n-emulated IMSIC swfile
- Fix print_reg defaults in get-reg-list selftest
KVM/arm64 fixes for 6.7, part #2
- Ensure a vCPU's redistributor is unregistered from the MMIO bus
if vCPU creation fails
- Fix building KVM selftests for arm64 from the top-level Makefile
Pull xen fix from Juergen Gross:
"A single patch fixing a build issue for x86 32-bit configurations with
CONFIG_XEN, which was introduced in the 6.7 development cycle"
* tag 'for-linus-6.7a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: add CPU dependencies for 32-bit build
Xen only supports modern CPUs even when running a 32-bit kernel, and it now
requires a kernel built for a 64 byte (or larger) cache line:
In file included from <command-line>:
In function 'xen_vcpu_setup',
inlined from 'xen_vcpu_setup_restore' at arch/x86/xen/enlighten.c:111:3,
inlined from 'xen_vcpu_restore' at arch/x86/xen/enlighten.c:141:3:
include/linux/compiler_types.h:435:45: error: call to '__compiletime_assert_287' declared with attribute error: BUILD_BUG_ON failed: sizeof(*vcpup) > SMP_CACHE_BYTES
arch/x86/xen/enlighten.c:166:9: note: in expansion of macro 'BUILD_BUG_ON'
166 | BUILD_BUG_ON(sizeof(*vcpup) > SMP_CACHE_BYTES);
| ^~~~~~~~~~~~
Enforce the dependency with a whitelist of CPU configurations. In normal
distro kernels, CONFIG_X86_GENERIC is enabled, and this works fine. When this
is not set, still allow Xen to be built on kernels that target a 64-bit
capable CPU.
Fixes: db2832309a ("x86/xen: fix percpu vcpu_info allocation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20231204084722.3789473-1-arnd@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Only the posix timer system calls use this (when the posix timer support
is disabled, which does not actually happen in any normal case), because
they had debug code to print out a warning about missing system calls.
Get rid of that special case, and just use the standard COND_SYSCALL
interface that creates weak system call stubs that return -ENOSYS for
when the system call does not exist.
This fixes a kCFI issue with the SYS_NI() hackery:
CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9)
WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull s390 fixes from Alexander Gordeev:
- Fix virtual vs physical address confusion in Storage Class Memory
(SCM) block device driver.
- Fix saving and restoring of FPU kernel context, which could lead to
corruption of vector registers 8-15
- Update defconfigs
* tag 's390-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/vx: fix save/restore of fpu kernel context
s390/scm: fix virtual vs physical address confusion
Pull ARM SoC fixes from Arnd Bergmann:
"There are only a handful of bugfixes this time, which feels almost too
small, so I hope we are not missing something important.
- One more mediatek dts warning fix after the previous larger set,
this should finally result in a clean defconfig build.
- TI OMAP dts fixes for a spurious hang on am335x and invalid data on
DTA7
- One DTS fix for ethernet on Oriange Pi Zero (Allwinner H616)
- A regression fix for ti-sysc interconnect target module driver to
not access registers after reset if srst_udelay quirk is needed
- Reset controller driver fixes for a crash during error handling and
a build warning"
* tag 'soc-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: mediatek: mt8395-genio-1200-evk: add interrupt-parent for mt6360
ARM: dts: Fix occasional boot hang for am3 usb
reset: Fix crash when freeing non-existent optional resets
ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
ARM: dts: dra7: Fix DRA7 L3 NoC node register size
bus: ti-sysc: Flush posted write only after srst_udelay
reset: hisilicon: hi6220: fix Wvoid-pointer-to-enum-cast warning
arm64: dts: allwinner: h616: update emac for Orange Pi Zero 3
The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the
'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which
causes a link failure when all the crypto support is in a loadable module
and kexec_file support is built-in:
x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load':
(.text+0x32e30a): undefined reference to `crypto_alloc_shash'
x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update'
x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final'
Both s390 and x86 have this problem, while ppc64 and riscv have the
correct dependency already. On riscv, the dependency is only used for the
purgatory, not for the kexec_file code itself, which may be a bit
surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable
KEXEC_FILE but then the purgatory code is silently left out.
Move this into the common Kconfig.kexec file in a way that is correct
everywhere, using the dependency on CRYPTO_SHA256=y only when the
purgatory code is available. This requires reversing the dependency
between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect
remains the same, other than making riscv behave like the other ones.
On s390, there is an additional dependency on CRYPTO_SHA256_S390, which
should technically not be required but gives better performance. Remove
this dependency here, noting that it was not present in the initial
Kconfig code but was brought in without an explanation in commit
71406883fd ("s390/kexec_file: Add kexec_file_load system call").
[arnd@arndb.de: fix riscv build]
Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com
Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org
Fixes: 6af5138083 ("x86/kexec: refactor for kernel/Kconfig.kexec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix for occasional boot hang for am335x USB
A fix for occasional boot hang for am335x USB that I've only recently
started noticing.
This can be merged naturally whenever suitable. This issue has been seen
with other similar SoCs earlier and has clearly existed for a long time.
* tag 'am3-usb-hang-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix occasional boot hang for am3 usb
Link: https://lore.kernel.org/r/pull-1703071616-395333@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes for omaps
A few fixes for omaps:
- A regression fix for ti-sysc interconnect target module driver to not access
registers after reset if srst_udelay quirk is needed
- DRA7 L3 NoC node register size fix
* tag 'omap-for-v6.7/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
ARM: dts: dra7: Fix DRA7 L3 NoC node register size
bus: ti-sysc: Flush posted write only after srst_udelay
Link: https://lore.kernel.org/r/pull-1702037799-781982@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The recent fix to ignore invalid x2APIC entries inadvertently broke
systems with creative MADT APIC tables. The affected systems have APIC
MADT tables where all entries have invalid APIC IDs (0xFF), which means
they register exactly zero CPUs.
But the condition to ignore the entries of APIC IDs < 255 in the X2APIC
MADT table is solely based on the count of MADT APIC table entries.
As a consequence, the affected machines enumerate no secondary CPUs at
all because the APIC table has entries and therefore the X2APIC table
entries with APIC IDs < 255 are ignored.
Change the condition so that the APIC table preference for APIC IDs <
255 only becomes effective when the APIC table has valid APIC ID
entries.
IOW, an APIC table full of invalid APIC IDs is considered to be empty
which in consequence enables the X2APIC table entries with a APIC ID
< 255 and restores the expected behaviour.
Fixes: ec9aedb2aa ("x86/acpi: Ignore invalid x2APIC entries")
Reported-by: John Sperbeck <jsperbeck@google.com>
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/169953729188.3135.6804572126118798018.tip-bot2@tip-bot2
The KERNEL_FPR mask only contains a flag for the first eight vector
registers. However floating point registers overlay parts of the first
sixteen vector registers.
This could lead to vector register corruption if a kernel fpu context uses
any of the vector registers 8 to 15 and is interrupted or calls a
KERNEL_FPR context. If that context uses also vector registers 8 to 15,
their contents will be corrupted on return.
Luckily this is currently not a real bug, since the kernel has only one
KERNEL_FPR user with s390_adjust_jiffies() and it is only using floating
point registers 0 to 2.
Fix this by using the correct bits for KERNEL_FPR.
Fixes: 7f79695cc1 ("s390/fpu: improve kernel_fpu_[begin|end]")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Pull powerpc fixes from Michael Ellerman:
- Fix a bug where heavy VAS (accelerator) usage could race with
partition migration and prevent the migration from completing.
- Update MAINTAINERS to add Aneesh & Naveen.
Thanks to Haren Myneni.
* tag 'powerpc-6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
MAINTAINERS: powerpc: Add Aneesh & Naveen
powerpc/pseries/vas: Migration suspend waits for no in-progress open windows
Pull arm64 fixes from Catalin Marinas:
- Arm CMN perf: fix the DTC allocation failure path which can end up
erroneously clearing live counters
- arm64/mm: fix hugetlb handling of the dirty page state leading to a
continuous fault loop in user on hardware without dirty bit
management (DBM). That's caused by the dirty+writeable information
not being properly preserved across a series of mprotect(PROT_NONE),
mprotect(PROT_READ|PROT_WRITE)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify
perf/arm-cmn: Fail DTC counter allocation correctly
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull misc fixes from Andrew Morton:
"17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6
issues"
* tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mglru: reclaim offlined memcgs harder
mm/mglru: respect min_ttl_ms with memcgs
mm/mglru: try to stop at high watermarks
mm/mglru: fix underprotected page cache
mm/shmem: fix race in shmem_undo_range w/THP
Revert "selftests: error out if kernel header files are not yet built"
crash_core: fix the check for whether crashkernel is from high memory
x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC
sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC
loongarch, kexec: change dependency of object files
mm/damon/core: make damon_start() waits until kdamond_fn() starts
selftests/mm: cow: print ksft header before printing anything else
mm: fix VMA heap bounds checking
riscv: fix VMALLOC_START definition
kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP
apply_alternatives() treats alternatives with the ALT_FLAG_NOT flag set
special as it optimizes the existing NOPs in place.
Unfortunately, this happens with interrupts enabled and does not provide any
form of core synchronization.
So an interrupt hitting in the middle of the update and using the affected code
path will observe a half updated NOP and crash and burn. The following
3 NOP sequence was observed to expose this crash halfway reliably under QEMU
32bit:
0x90 0x90 0x90
which is replaced by the optimized 3 byte NOP:
0x8d 0x76 0x00
So an interrupt can observe:
1) 0x90 0x90 0x90 nop nop nop
2) 0x8d 0x90 0x90 undefined
3) 0x8d 0x76 0x90 lea -0x70(%esi),%esi
4) 0x8d 0x76 0x00 lea 0x0(%esi),%esi
Where only #1 and #4 are true NOPs. The same problem exists for 64bit obviously.
Disable interrupts around this NOP optimization and invoke sync_core()
before re-enabling them.
Fixes: 270a69c448 ("x86/alternative: Support relocations in alternatives")
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/ZT6narvE%2BLxX%2B7Be@windriver.com
text_poke_early() does:
local_irq_save(flags);
memcpy(addr, opcode, len);
local_irq_restore(flags);
sync_core();
That's not really correct because the synchronization should happen before
interrupts are re-enabled to ensure that a pending interrupt observes the
complete update of the opcodes.
It's not entirely clear whether the interrupt entry provides enough
serialization already, but moving the sync_core() invocation into interrupt
disabled region does no harm and is obviously correct.
Fixes: 6fffacb303 ("x86/alternatives, jumplabel: Use text_poke_early() before mm_init()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/ZT6narvE%2BLxX%2B7Be@windriver.com
Chris reported that a Dell PowerEdge T340 system stopped to boot when upgrading
to a kernel which contains the parallel hotplug changes. Disabling parallel
hotplug on the kernel command line makes it boot again.
It turns out that the Dell BIOS has x2APIC enabled and the boot CPU comes up in
X2APIC mode, but the APs come up inconsistently in xAPIC mode.
Parallel hotplug requires that the upcoming CPU reads out its APIC ID from the
local APIC in order to map it to the Linux CPU number.
In this particular case the readout on the APs uses the MMIO mapped registers
because the BIOS failed to enable x2APIC mode. That readout results in a page
fault because the kernel does not have the APIC MMIO space mapped when X2APIC
mode was enabled by the BIOS on the boot CPU and the kernel switched to X2APIC
mode early. That page fault can't be handled on the upcoming CPU that early and
results in a silent boot failure.
If parallel hotplug is disabled the system boots because in that case the APIC
ID read is not required as the Linux CPU number is provided to the AP in the
smpboot control word. When the kernel uses x2APIC mode then the APs are
switched to x2APIC mode too slightly later in the bringup process, but there is
no reason to do it that late.
Cure the BIOS bogosity by checking in the parallel bootup path whether the
kernel uses x2APIC mode and if so switching over the APs to x2APIC mode before
the APIC ID readout.
Fixes: 0c7ffa32db ("x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it")
Reported-by: Chris Lindee <chris.lindee@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Chris Lindee <chris.lindee@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/CA%2B2tU59853R49EaU_tyvOZuOTDdcU0RshGyydccp9R1NX9bEeQ@mail.gmail.com
Pull networking fixes from Paolo Abeni:
"Current release - regressions:
- tcp: fix tcp_disordered_ack() vs usec TS resolution
Current release - new code bugs:
- dpll: sanitize possible null pointer dereference in
dpll_pin_parent_pin_set()
- eth: octeon_ep: initialise control mbox tasks before using APIs
Previous releases - regressions:
- io_uring/af_unix: disable sending io_uring over sockets
- eth: mlx5e:
- TC, don't offload post action rule if not supported
- fix possible deadlock on mlx5e_tx_timeout_work
- eth: iavf: fix iavf_shutdown to call iavf_remove instead iavf_close
- eth: bnxt_en: fix skb recycling logic in bnxt_deliver_skb()
- eth: ena: fix DMA syncing in XDP path when SWIOTLB is on
- eth: team: fix use-after-free when an option instance allocation
fails
Previous releases - always broken:
- neighbour: don't let neigh_forced_gc() disable preemption for long
- net: prevent mss overflow in skb_segment()
- ipv6: support reporting otherwise unknown prefix flags in
RTM_NEWPREFIX
- tcp: remove acked SYN flag from packet in the transmit queue
correctly
- eth: octeontx2-af:
- fix a use-after-free in rvu_nix_register_reporters
- fix promisc mcam entry action
- eth: dwmac-loongson: make sure MDIO is initialized before use
- eth: atlantic: fix double free in ring reinit logic"
* tag 'net-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
net: atlantic: fix double free in ring reinit logic
appletalk: Fix Use-After-Free in atalk_ioctl
net: stmmac: Handle disabled MDIO busses from devicetree
net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX
dpaa2-switch: do not ask for MDB, VLAN and FDB replay
dpaa2-switch: fix size of the dma_unmap
net: prevent mss overflow in skb_segment()
vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()
Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set"
MIPS: dts: loongson: drop incorrect dwmac fallback compatible
stmmac: dwmac-loongson: drop useless check for compatible fallback
stmmac: dwmac-loongson: Make sure MDIO is initialized before use
tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set
dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set()
net: ena: Fix XDP redirection error
net: ena: Fix DMA syncing in XDP path when SWIOTLB is on
net: ena: Fix xdp drops handling due to multibuf packets
net: ena: Destroy correct number of xdp queues upon failure
net: Remove acked SYN flag from packet in the transmit queue correctly
qed: Fix a potential use-after-free in qed_cxt_tables_alloc
...
Add hugetlb definitions if THP enabled. ARC doesn't support
HugeTLB FS but it supports THP. Some kernel code such as pagemap
uses hugetlb definitions with THP.
This patch fixes ARC build issue (HPAGE_SIZE undeclared error) with
TRANSPARENT_HUGEPAGE enabled.
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Pull EFI fixes from Ard Biesheuvel:
- Deal with a regression in the recently refactored x86 EFI stub code
on older Dell systems by disabling randomization of the physical load
address
- Use the correct load address for relocatable Loongarch kernels
* tag 'efi-urgent-for-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/x86: Avoid physical KASLR on older Dell systems
efi/loongarch: Use load address to calculate kernel entry address
When intercepts are enabled for MSR_IA32_XSS, the host will swap in/out
the guest-defined values while context-switching to/from guest mode.
However, in the case of SEV-ES, vcpu->arch.guest_state_protected is set,
so the guest-defined value is effectively ignored when switching to
guest mode with the understanding that the VMSA will handle swapping
in/out this register state.
However, SVM is still configured to intercept these accesses for SEV-ES
guests, so the values in the initial MSR_IA32_XSS are effectively
read-only, and a guest will experience undefined behavior if it actually
tries to write to this MSR. Fortunately, only CET/shadowstack makes use
of this register on SEV-ES-capable systems currently, which isn't yet
widely used, but this may become more of an issue in the future.
Additionally, enabling intercepts of MSR_IA32_XSS results in #VC
exceptions in the guest in certain paths that can lead to unexpected #VC
nesting levels. One example is SEV-SNP guests when handling #VC
exceptions for CPUID instructions involving leaf 0xD, subleaf 0x1, since
they will access MSR_IA32_XSS as part of servicing the CPUID #VC, then
generate another #VC when accessing MSR_IA32_XSS, which can lead to
guest crashes if an NMI occurs at that point in time. Running perf on a
guest while it is issuing such a sequence is one example where these can
be problematic.
Address this by disabling intercepts of MSR_IA32_XSS for SEV-ES guests
if the host/guest configuration allows it. If the host/guest
configuration doesn't allow for MSR_IA32_XSS, leave it intercepted so
that it can be caught by the existing checks in
kvm_{set,get}_msr_common() if the guest still attempts to access it.
Fixes: 376c6d2850 ("KVM: SVM: Provide support for SEV-ES vCPU creation/loading")
Cc: Alexey Kardashevskiy <aik@amd.com>
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231016132819.1002933-4-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hypervisor returns migration failure if all VAS windows are not
closed. During pre-migration stage, vas_migration_handler() sets
migration_in_progress flag and closes all windows from the list.
The allocate VAS window routine checks the migration flag, setup
the window and then add it to the list. So there is possibility of
the migration handler missing the window that is still in the
process of setup.
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
unlock vas_pseries_mutex
Modify window HCALL lock vas_pseries_mutex
setup window migration_in_progress=true
Closes all windows from the list
// May miss windows that are
// not in the list
unlock vas_pseries_mutex
lock vas_pseries_mutex return
if nr_closed_windows == 0
// No DLPAR CPU or migration
add window to the list
// Window will be added to the
// list after the setup is completed
unlock vas_pseries_mutex
return
unlock vas_pseries_mutex
Close VAS window
// due to DLPAR CPU or migration
return -EBUSY
This patch resolves the issue with the following steps:
- Set the migration_in_progress flag without holding mutex.
- Introduce nr_open_wins_progress counter in VAS capabilities
struct
- This counter tracks the number of open windows are still in
progress
- The allocate setup window thread closes windows if the migration
is set and decrements nr_open_window_progress counter
- The migration handler waits for no in-progress open windows.
The code flow with the fix is as follows:
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
nr_open_wins_progress++
// Window opened, but not
// added to the list yet
unlock vas_pseries_mutex
Modify window HCALL migration_in_progress=true
setup window lock vas_pseries_mutex
Closes all windows from the list
While nr_open_wins_progress {
unlock vas_pseries_mutex
lock vas_pseries_mutex sleep
if nr_closed_windows == 0 // Wait if any open window in
or migration is not started // progress. The open window
// No DLPAR CPU or migration // thread closes the window without
add window to the list // adding to the list and return if
nr_open_wins_progress-- // the migration is in progress.
unlock vas_pseries_mutex
return
Close VAS window
nr_open_wins_progress--
unlock vas_pseries_mutex
return -EBUSY lock vas_pseries_mutex
}
unlock vas_pseries_mutex
return
Fixes: 37e6764895 ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231125235104.3405008-1-haren@linux.ibm.com
Device binds to proper PCI ID (LOONGSON, 0x7a03), already listed in DTS,
so checking for some other compatible does not make sense. It cannot be
bound to unsupported platform.
Drop useless, incorrect (space in between) and undocumented compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With subtle timings changes, we can now sometimes get an external abort on
non-linefetch error booting am3 devices at sysc_reset(). This is because
of a missing reset delay needed for the usb target module.
Looks like we never enabled the delay earlier for am3, although a similar
issue was seen earlier with a similar usb setup for dm814x as described in
commit ebf2441480 ("ARM: OMAP2+: Use srst_udelay for USB on dm814x").
Cc: stable@vger.kernel.org
Fixes: 0782e8572c ("ARM: dts: Probe am335x musb with ti-sysc")
Signed-off-by: Tony Lindgren <tony@atomide.com>
The emulated IMSIC update the external interrupt pending depending on
the value of eidelivery and topei. It might lose an interrupt when it
is interrupted before setting the new value to the pending status.
For example, when VCPU0 sends an IPI to VCPU1 via IMSIC:
VCPU0 VCPU1
CSRSWAP topei = 0
The VCPU1 has claimed all the external
interrupt in its interrupt handler.
topei of VCPU1's IMSIC = 0
set pending in VCPU1's IMSIC
topei of VCPU1' IMSIC = 1
set the external interrupt
pending of VCPU1
clear the external interrupt pending
of VCPU1
When the VCPU1 switches back to VS mode, it exits the interrupt handler
because the result of CSRSWAP topei is 0. If there are no other external
interrupts injected into the VCPU1's IMSIC, VCPU1 will never know this
pending interrupt unless it initiative read the topei.
If the interruption occurs between updating interrupt pending in IMSIC
and updating external interrupt pending of VCPU, it will not cause a
problem. Suppose that the VCPU1 clears the IPI pending in IMSIC right
after VCPU0 sets the pending, the external interrupt pending of VCPU1
will not be set because the topei is 0. But when the VCPU1 goes back to
VS mode, the pending IPI will be reported by the CSRSWAP topei, it will
not lose this interrupt.
So we only need to make the external interrupt updating procedure as a
critical section to avoid the problem.
Fixes: db8b7e97d6 ("RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC")
Tested-by: Roy Lin <roy.lin@sifive.com>
Tested-by: Wayling Chen <wayling.chen@sifive.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
--------------------------------------------------------------------
mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free':
kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup'
mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec':
kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec'
mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec':
kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec'
--------------------------------------------------------------------
Here, change the dependency of building kexec_core related object files,
and the ifdeffery in mips from CONFIG_KEXEC to CONFIG_KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231208073036.7884-4-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302042.sn8cDPIX-lkp@intel.com/
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kexec: fix the incorrect ifdeffery and dependency of
CONFIG_KEXEC".
The select of KEXEC for CRASH_DUMP in kernel/Kconfig.kexec will be
dropped, then compiling errors will be triggered if below config items are
set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
E.g on mips, below link error are seen:
--------------------------------------------------------------------
mipsel-linux-ld: kernel/kexec_core.o: in function `kimage_free':
kernel/kexec_core.c:(.text+0x2200): undefined reference to `machine_kexec_cleanup'
mipsel-linux-ld: kernel/kexec_core.o: in function `__crash_kexec':
kernel/kexec_core.c:(.text+0x2480): undefined reference to `machine_crash_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x2488): undefined reference to `machine_kexec'
mipsel-linux-ld: kernel/kexec_core.o: in function `kernel_kexec':
kernel/kexec_core.c:(.text+0x29b8): undefined reference to `machine_shutdown'
mipsel-linux-ld: kernel/kexec_core.c:(.text+0x29c0): undefined reference to `machine_kexec'
--------------------------------------------------------------------
Here, change the incorrect dependency of building kexec_core related
object files, and the ifdeffery on architectures from CONFIG_KEXEC to
CONFIG_KEXEC_CORE.
Testing:
========
Passed on mips and loognarch with the LKP reproducer.
This patch (of 5):
Currently, in arch/loongarch/kernel/Makefile, building machine_kexec.o
relocate_kernel.o depends on CONFIG_KEXEC.
Whereas, since we will drop the select of KEXEC for CRASH_DUMP in
kernel/Kconfig.kexec, compiling error will be triggered if below config
items are set:
===
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
===
---------------------------------------------------------------
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L209':
>> kexec_core.c:(.text+0x1660): undefined reference to `machine_kexec_cleanup'
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L287':
>> kexec_core.c:(.text+0x1c5c): undefined reference to `machine_crash_shutdown'
>> loongarch64-linux-ld: kexec_core.c:(.text+0x1c64): undefined reference to `machine_kexec'
loongarch64-linux-ld: kernel/kexec_core.o: in function `.L2^B5':
>> kexec_core.c:(.text+0x2090): undefined reference to `machine_shutdown'
loongarch64-linux-ld: kexec_core.c:(.text+0x20a0): undefined reference to `machine_kexec'
---------------------------------------------------------------
Here, change the dependency of machine_kexec.o relocate_kernel.o to
CONFIG_KEXEC_CORE can fix above building error.
Link: https://lkml.kernel.org/r/20231208073036.7884-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20231208073036.7884-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311300946.kHE9Iu71-lkp@intel.com/
Cc: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
