Currently the kzalloc failure check just sets reports the failure
and sets the variable ret to -ENOMEM, which is not checked later
for this specific error. Fix this by just returning -ENOMEM rather
than setting ret.
Fixes: 4fb9307154 ("drm/amd/amdgpu: remove redundant host to psp cmd buf allocations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ee9d1a096)
The bridge has three bootstrap pins which are sampled to determine the
frequency of the external reference clock. The driver will also
(over)write that setting. But it seems this is racy after the bridge is
enabled. It was observed that although the driver write the correct
value (by sniffing on the I2C bus), the register has the wrong value.
The datasheet states that the GPIO lines have to be stable for at least
5us after asserting the EN signal. Thus, there seems to be some logic
which samples the GPIO lines and this logic appears to overwrite the
register value which was set by the driver. Waiting 20us after
asserting the EN line resolves this issue.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250821122341.1257286-1-mwalle@kernel.org
The drm_sched_job_unschedulable trace point can access
entity->dependency after it was cleared by the callback
installed in drm_sched_entity_add_dependency_cb, causing:
BUG: kernel NULL pointer dereference, address: 0000000000000020
[...]
Workqueue: comp_1.1.0 drm_sched_run_job_work [gpu_sched]
RIP: 0010:trace_event_raw_event_drm_sched_job_unschedulable+0x70/0xd0 [gpu_sched]
To fix this we either need to keep a reference to the fence before
setting up the callbacks, or move the trace_drm_sched_job_unschedulable
calls into drm_sched_entity_add_dependency_cb where they can be
done earlier.
Fixes: 76d97c870f ("drm/sched: Trace dependencies for GPU jobs")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250901124032.1955-1-pierre-eric.pelloux-prayer@amd.com
(cherry picked from commit b2b8af21fe)
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Nouveau has code that when it gets an IRQ with no allowed handler
it disables it to avoid storms.
However with nonstall interrupts, we often disable them from
the drm driver, but still request their emission via the push submission.
Just don't disable nonstall irqs ever in normal operation, the
event handling code will filter them out, and the driver will
just enable/disable them at load time.
This fixes timeouts we've been seeing on/off for a long time,
but they became a lot more noticeable on Blackwell.
This doesn't fix all of them, there is a subsequent fence emission
fix to fix the last few.
Fixes: 3ebd64aa3c ("drm/nouveau/intr: support multiple trees, and explicit interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250829021633.1674524-1-airlied@gmail.com
[ Fix a typo and a minor checkpatch.pl warning; remove "v2" from commit
subject. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Using the previous firmware could lead to problems with
PROTECTED_FENCE_SIGNAL commands, specifically causing register
conflicts between MCU_DBG0 and MCU_DBG1.
The updated firmware versions ensure proper alignment
and unification of the SDMA_SUBOP_PROTECTED_FENCE_SIGNAL value with SDMA 7.x,
resolving these hardware coordination issues
Fixes: e8cca30d8b ("drm/amdgpu/sdma6: add ucode version checks for userq support")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit aab8b689ad)
Cc: stable@vger.kernel.org
Mediatek DRM Fixes - 20250829
1. Add error handling for old state CRTC in atomic_disable
2. Fix DSI host and panel bridge pre-enable order
3. Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
4. mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20250828234116.4960-1-chunkuang.hu@kernel.org
The minimum firmware versions required for user queue functionality
have been increased to address an issue where the queue privilege
state was lost during queue connect operations.
The problem occurred because the privilege state was being restored
to its initial value at the beginning of the function, overwriting
the state that was properly set during the queue connect case.
This commit updates the minimum version requirements:
- ME firmware from 2390 to 2420
- PFP firmware from 2530 to 2580
- MEC firmware from 2600 to 2650
- MES firmware remains at 120
These updated firmware versions contain the necessary fixes to
properly maintain queue privilege state throughout connect operations.
Fixes: 61ca97e959 ("drm/amdgpu: Add fw minimum version check for usermode queue")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5f976c9939)
Cc: stable@vger.kernel.org
This reverts commit b08425fa77.
Revert this to align with 6.17 because the fixes tag
was wrong on this commit.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit be33e8a239)
Commit b0a2ee5567 ("drm/xe: prepare xe_gen_wa_oob to be multi-use")
introduced a call to basename(). The GNU version of this function is not
portable and fails to build with alternative libc implementations like
musl or bionic. This causes the following build error:
drivers/gpu/drm/xe/xe_gen_wa_oob.c:130:12: error: assignment to ‘const char *’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
130 | fn = basename(fn);
| ^
While a POSIX version of basename() could be used, it would require a
separate header plus the behavior differs from GNU version in that it
might modify its argument. Not great.
Instead, implement a local xbasename() helper based on strrchr() that
provides the same functionality and avoids portability issues.
Fixes: b0a2ee5567 ("drm/xe: prepare xe_gen_wa_oob to be multi-use")
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tiffany Yang <ynaffit@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250825155743.1132433-1-cmllamas@google.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 41be792f5b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit 482c7e296e.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc7 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250715084549.41473-1-tzimmermann@suse.de
The drm_atomic_get_new_connector_state() can return NULL if the
connector is not part of the atomic state. Add a check to prevent
a NULL pointer dereference.
This follows the same pattern used in dpu_encoder_update_topology()
within the same file, which checks for NULL before using conn_state.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 1ce69c265a ("drm/msm/dpu: move resource allocation to CRTC")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/665188/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The 'tag' parameter is passed by value and is not actually used after
being incremented, so remove the increment. It's the function that calls
gm200_flcn_pio_imem_wr that is supposed to (and does) increment 'tag'.
Fixes: 0e44c21708 ("drm/nouveau/flcn: new code to load+boot simple HS FWs (VPR scrubber)")
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Current dma-buf vmap semantics require that the mapped buffer remains
in place until the corresponding vunmap has completed.
For GEM-SHMEM, this used to be guaranteed by a pin operation while creating
an S/G table in import. GEM-SHMEN can now import dma-buf objects without
creating the S/G table, so the pin is missing. Leads to page-fault errors,
such as the one shown below.
[ 102.101726] BUG: unable to handle page fault for address: ffffc90127000000
[...]
[ 102.157102] RIP: 0010:udl_compress_hline16+0x219/0x940 [udl]
[...]
[ 102.243250] Call Trace:
[ 102.245695] <TASK>
[ 102.2477V95] ? validate_chain+0x24e/0x5e0
[ 102.251805] ? __lock_acquire+0x568/0xae0
[ 102.255807] udl_render_hline+0x165/0x341 [udl]
[ 102.260338] ? __pfx_udl_render_hline+0x10/0x10 [udl]
[ 102.265379] ? local_clock_noinstr+0xb/0x100
[ 102.269642] ? __lock_release.isra.0+0x16c/0x2e0
[ 102.274246] ? mark_held_locks+0x40/0x70
[ 102.278177] udl_primary_plane_helper_atomic_update+0x43e/0x680 [udl]
[ 102.284606] ? __pfx_udl_primary_plane_helper_atomic_update+0x10/0x10 [udl]
[ 102.291551] ? lockdep_hardirqs_on_prepare.part.0+0x92/0x170
[ 102.297208] ? lockdep_hardirqs_on+0x88/0x130
[ 102.301554] ? _raw_spin_unlock_irq+0x24/0x50
[ 102.305901] ? wait_for_completion_timeout+0x2bb/0x3a0
[ 102.311028] ? drm_atomic_helper_calc_timestamping_constants+0x141/0x200
[ 102.317714] ? drm_atomic_helper_commit_planes+0x3b6/0x1030
[ 102.323279] drm_atomic_helper_commit_planes+0x3b6/0x1030
[ 102.328664] drm_atomic_helper_commit_tail+0x41/0xb0
[ 102.333622] commit_tail+0x204/0x330
[...]
[ 102.529946] ---[ end trace 0000000000000000 ]---
[ 102.651980] RIP: 0010:udl_compress_hline16+0x219/0x940 [udl]
In this stack strace, udl (based on GEM-SHMEM) imported and vmap'ed a
dma-buf from amdgpu. Amdgpu relocated the buffer, thereby invalidating the
mapping.
Provide a custom dma-buf vmap method in amdgpu that pins the object before
mapping it's buffer's pages into kernel address space. Do the opposite in
vunmap.
Note that dma-buf vmap differs from GEM vmap in how it handles relocation.
While dma-buf vmap keeps the buffer in place, GEM vmap requires the caller
to keep the buffer in place. Hence, this fix is in amdgpu's dma-buf code
instead of its GEM code.
A discussion of various approaches to solving the problem is available
at [1].
v3:
- try (GTT | VRAM); drop CPU domain (Christian)
v2:
- only use mapable domains (Christian)
- try pinning to domains in preferred order
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 660cd44659 ("drm/shmem-helper: Import dmabuf without mapping its sg_table")
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Closes: https://lore.kernel.org/dri-devel/ba1bdfb8-dbf7-4372-bdcb-df7e0511c702@suse.de/
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://lore.kernel.org/dri-devel/9792c6c3-a2b8-4b2b-b5ba-fba19b153e21@suse.de/ # [1]
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250821064031.39090-1-tzimmermann@suse.de
In several code paths, such as xe_pt_create(), the vm->xef field is used
to determine whether a VM originates from userspace or the kernel.
Previously, this handler was only assigned in xe_vm_create_ioctl(),
after the VM was created by xe_vm_create(). However, xe_vm_create()
triggers page table creation, and that function assumes vm->xef should
be already set. This could lead to incorrect origin detection.
To fix this problem and ensure consistency in the initialization of
the VM object, let's move the assignment of this handler to
xe_vm_create.
v2:
- take reference to the xe file object only when xef is not NULL
- release the reference to the xe file object on the error path (Matthew)
Fixes: 7f387e6012 ("drm/xe: add XE_BO_FLAG_PINNED_LATE_RESTORE")
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250811104358.2064150-2-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 9337166fa1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On DCE 6, DP audio was not working. However, it worked when an
HDMI monitor was also plugged in.
Looking at dce_aud_wall_dto_setup it seems that the main
difference is that we use DTO1 when only DP is plugged in.
When programming DTO1, it uses audio_dto_source_clock_in_khz
which is set from get_dp_ref_freq_khz
The dce60_get_dp_ref_freq_khz implementation looks incorrect,
because DENTIST_DISPCLK_CNTL seems to be always zero on DCE 6,
so it isn't usable.
I compared dce60_get_dp_ref_freq_khz to the legacy display code,
specifically dce_v6_0_audio_set_dto, and it turns out that in
case of DCE 6, it needs to use the display clock. With that,
DP audio started working on Pitcairn, Oland and Cape Verde.
However, it still didn't work on Tahiti. Despite having the
same DCE version, Tahiti seems to have a different audio device.
After some trial and error I realized that it works with the
default display clock as reported by the VBIOS, not the current
display clock.
The patch was tested on all four SI GPUs:
* Pitcairn (DCE 6.0)
* Oland (DCE 6.4)
* Cape Verde (DCE 6.0)
* Tahiti (DCE 6.0 but different)
The testing was done on Samsung Odyssey G7 LS28BG700EPXEN on
each of the above GPUs, at the following settings:
* 4K 60 Hz
* 1080p 60 Hz
* 1080p 144 Hz
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 645cc7863d)
Cc: stable@vger.kernel.org
For later VBIOS versions, the fractional feedback divider is
calculated as the remainder of dividing the feedback divider by
a factor, which is set to 1000000. For reference, see:
- calculate_fb_and_fractional_fb_divider
- calc_pll_max_vco_construct
However, in case of old VBIOS versions that have
set_pixel_clock_v3, they only have 1 byte available for the
fractional feedback divider, and it's expected to be set to the
remainder from dividing the feedback divider by 10.
For reference see the legacy display code:
- amdgpu_pll_compute
- amdgpu_atombios_crtc_program_pll
This commit fixes set_pixel_clock_v3 by dividing the fractional
feedback divider passed to the function by 100000.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 027e7acc7e)
Cc: stable@vger.kernel.org
When getting the number of connectors, the VBIOS reports
the number of valid indices, but it doesn't say which indices
are valid, and not every valid index has an actual connector.
If we don't find a connector on an index, that is not an error.
Considering these are not actual errors, don't litter the logs.
Fixes: 60df562814 ("drm/amd/display: handle invalid connector indices")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 249d4bc5f1)
