While performing RSS based on IPv4, packets with
IPv4 options are not being considered. Adding changes
to match both plain IPv4 and IPv4 with option header.
Fixes: 41a7aa7b80 ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While performing RSS based on IPv6, extension ltype
is not being considered. This will be problem for
fragmented packets or packets with extension header.
Adding changes to match IPv6 ext header along with IPv6
ltype.
Fixes: 41a7aa7b80 ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checksum and length checks are not enabled for IPv4 header with
options and IPv6 with extension headers.
To fix this a change in enum npc_kpu_lc_ltype is required which will
allow adjustment of LTYPE_MASK to detect all types of IP headers.
Fixes: 21e6699e5c ("octeontx2-af: Add NPC KPU profile")
Signed-off-by: Michal Mazur <mmazur2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes CPT_LF_ALLOC mailbox error due to
incompatible mailbox message format. Specifically, it
corrects the `blkaddr` field type from `int` to `u8`.
Fixes: de2854c87c ("octeontx2-af: Mailbox changes for 98xx CPT block")
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace slot id with global CPT lf id on reg read/write as
CPTPF/VF driver would send slot number instead of global
lf id in the reg offset. And also update the mailbox response
with the global lf's register offset.
Fixes: ae454086e3 ("octeontx2-af: add mailbox interface for CPT")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove wrong EIO to EGAIN conversion and pass all errors as is.
After commit 230f3d53a5 ("i40e: remove i40e_status"), which should only
replace F/W specific error codes with Linux kernel generic, all EIO errors
suddenly started to be converted into EAGAIN which leads nvmupdate to retry
until it timeouts and sometimes fails after more than 20 minutes in the
middle of NVM update, so NVM becomes corrupted.
The bug affects users only at the time when they try to update NVM, and
only F/W versions that generate errors while nvmupdate. For example, X710DA2
with 0x8000ECB7 F/W is affected, but there are probably more...
Command for reproduction is just NVM update:
./nvmupdate64
In the log instead of:
i40e_nvmupd_exec_aq err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOMEM)
appears:
i40e_nvmupd_exec_aq err -EIO aq_err I40E_AQ_RC_ENOMEM
i40e: eeprom check failed (-5), Tx/Rx traffic disabled
The problematic code did silently convert EIO into EAGAIN which forced
nvmupdate to ignore EAGAIN error and retry the same operation until timeout.
That's why NVM update takes 20+ minutes to finish with the fail in the end.
Fixes: 230f3d53a5 ("i40e: remove i40e_status")
Co-developed-by: Kelvin Kang <kelvin.kang@intel.com>
Signed-off-by: Kelvin Kang <kelvin.kang@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710224455.188502-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The amount of TX space in the hardware buffer is tracked in the tx_space
variable. The initial value is currently only set during driver probing.
After closing the interface and reopening it the tx_space variable has
the last value it had before close. If it is smaller than the size of
the first send packet after reopeing the interface the queue will be
stopped. The queue is woken up after receiving a TX interrupt but this
will never happen since we did not send anything.
This commit moves the initialization of the tx_space variable to the
ks8851_net_open function right before starting the TX queue. Also query
the value from the hardware instead of using a hard coded value.
Only the SPI chip variant is affected by this issue because only this
driver variant actually depends on the tx_space variable in the xmit
function.
Fixes: 3dc5d44545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240709195845.9089-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The below commit introduced a warning message when phy state is not in
the states: PHY_HALTED, PHY_READY, and PHY_UP.
commit 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
mtk-star-emac doesn't need mdiobus suspend/resume. To fix the warning
message during resume, indicate the phy resume/suspend is managed by the
mac when probing.
Fixes: 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Jian Hui Lee <jianhui.lee@canonical.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240708065210.4178980-1-jianhui.lee@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The commit 6533e558c6 ("i40e: Fix reset path while removing
the driver") introduced a new PF state "__I40E_IN_REMOVE" to block
modifying the XDP program while the driver is being removed.
Unfortunately, such a change is useful only if the ".ndo_bpf()"
callback was called out of the rmmod context because unloading the
existing XDP program is also a part of driver removing procedure.
In other words, from the rmmod context the driver is expected to
unload the XDP program without reporting any errors. Otherwise,
the kernel warning with callstack is printed out to dmesg.
Example failing scenario:
1. Load the i40e driver.
2. Load the XDP program.
3. Unload the i40e driver (using "rmmod" command).
The example kernel warning log:
[ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.002726] Call Trace:
[ +0.002457] <TASK>
[ +0.002119] ? __warn+0x80/0x120
[ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005586] ? report_bug+0x164/0x190
[ +0.003678] ? handle_bug+0x3c/0x80
[ +0.003503] ? exc_invalid_op+0x17/0x70
[ +0.003846] ? asm_exc_invalid_op+0x1a/0x20
[ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870
[ +0.005586] unregister_netdevice_queue+0xf7/0x140
[ +0.004806] unregister_netdev+0x1c/0x30
[ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e]
[ +0.004604] i40e_remove+0x1a1/0x420 [i40e]
[ +0.004220] pci_device_remove+0x3f/0xb0
[ +0.003943] device_release_driver_internal+0x19f/0x200
[ +0.005243] driver_detach+0x48/0x90
[ +0.003586] bus_remove_driver+0x6d/0xf0
[ +0.003939] pci_unregister_driver+0x2e/0xb0
[ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e]
[ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310
[ +0.005153] do_syscall_64+0x85/0x170
[ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220
[ +0.004886] ? do_syscall_64+0x95/0x170
[ +0.003851] ? exc_page_fault+0x7e/0x180
[ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79
[ +0.005064] RIP: 0033:0x7f59dc9347cb
[ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83
c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48
[ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb
[ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748
[ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000
[ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000
[ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000
[ +0.007151] </TASK>
[ +0.002204] ---[ end trace 0000000000000000 ]---
Fix this by checking if the XDP program is being loaded or unloaded.
Then, block only loading a new program while "__I40E_IN_REMOVE" is set.
Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP
callback to avoid unnecessary operations and checks.
Fixes: 6533e558c6 ("i40e: Fix reset path while removing the driver")
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240708230750.625986-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SMP is enabled and spinlocks are actually functional then there is
a deadlock with the 'statelock' spinlock between ks8851_start_xmit_spi
and ks8851_irq:
watchdog: BUG: soft lockup - CPU#0 stuck for 27s!
call trace:
queued_spin_lock_slowpath+0x100/0x284
do_raw_spin_lock+0x34/0x44
ks8851_start_xmit_spi+0x30/0xb8
ks8851_start_xmit+0x14/0x20
netdev_start_xmit+0x40/0x6c
dev_hard_start_xmit+0x6c/0xbc
sch_direct_xmit+0xa4/0x22c
__qdisc_run+0x138/0x3fc
qdisc_run+0x24/0x3c
net_tx_action+0xf8/0x130
handle_softirqs+0x1ac/0x1f0
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x3c/0x58
do_softirq_own_stack+0x1c/0x28
__irq_exit_rcu+0x54/0x9c
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x38/0x50
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x64/0x68
__netif_schedule+0x6c/0x80
netif_tx_wake_queue+0x38/0x48
ks8851_irq+0xb8/0x2c8
irq_thread_fn+0x2c/0x74
irq_thread+0x10c/0x1b0
kthread+0xc8/0xd8
ret_from_fork+0x10/0x20
This issue has not been identified earlier because tests were done on
a device with SMP disabled and so spinlocks were actually NOPs.
Now use spin_(un)lock_bh for TX queue related locking to avoid execution
of softirq work synchronously that would lead to a deadlock.
Fixes: 3dc5d44545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240706101337.854474-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In rvu_check_rsrc_availability() in case of invalid SSOW req, an incorrect
data is printed to error log. 'req->sso' value is printed instead of
'req->ssow'. Looks like "copy-paste" mistake.
Fix this mistake by replacing 'req->sso' with 'req->ssow'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 746ea74241 ("octeontx2-af: Add RVU block LF provisioning support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240705095317.12640-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bnxt doesn't check if a ring is used by RSS contexts when reducing
ring count. Core performs a similar check for the drivers for
the main context, but core doesn't know about additional contexts,
so it can't validate them. bnxt_fill_hw_rss_tbl_p5() uses ring
id to index bp->rx_ring[], which without the check may end up
being out of bounds.
BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
__bnxt_setup_vnic_p5+0x12e/0x270
__bnxt_open_nic+0x2262/0x2f30
bnxt_open_nic+0x5d/0xf0
ethnl_set_channels+0x5d4/0xb30
ethnl_default_set_doit+0x2f1/0x620
Core does track the additional contexts in net-next, so we can
move this validation out of the driver as a follow up there.
Fixes: b3d0083caf ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240705020005.681746-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On the parisc platform, the kernel issues kernel warnings because
swap_endian() tries to load a 128-bit IPv6 address from an unaligned
memory location:
Kernel: unaligned access to 0x55f4688c in wg_allowedips_insert_v6+0x2c/0x80 [wireguard] (iir 0xf3010df)
Kernel: unaligned access to 0x55f46884 in wg_allowedips_insert_v6+0x38/0x80 [wireguard] (iir 0xf2010dc)
Avoid such unaligned memory accesses by instead using the
get_unaligned_be64() helper macro.
Signed-off-by: Helge Deller <deller@gmx.de>
[Jason: replace src[8] in original patch with src+8]
Cc: stable@vger.kernel.org
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20240704154517.1572127-3-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'phy' parameter supplied to lan9303_phy_read/_write was sometimes a
DSA port number and sometimes a PHY address. This isn't a problem as
long as they are equal. But if the external phy_addr_sel_strap pin is
wired to 'high', the PHY addresses change from 0-1-2 to 1-2-3 (CPU,
slave0, slave1). In this case, lan9303_phy_read/_write must translate
between DSA port numbers and the corresponding PHY address.
Fixes: a1292595e0 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240703145718.19951-1-ceggers@arri.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available. If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.
There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts. It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.
Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted. The resources will be available for
use when new contexts are created later.
Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts. In the future, we will conditionally
disable this workaround when the firmware fix is available.
Fixes: 438ba39b25 ("bnxt_en: Improve RSS context reservation infrastructure")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20240625010210.2002310-1-kuba@kernel.org/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240703180112.78590-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b217127e5e ("mlxsw: core_linecards: Add line card objects and implement provisioning")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Link: https://patch.msgid.link/20240704111431.11DEDC3277B@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
IOW, calling _test_bit() avoids potential compile-time optimizations.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Fixes: 4da71a77fc ("ice: read internal temperature sensor")
Acked-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418
Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107
CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc1/0x5e0 mm/kasan/report.c:475
kasan_report+0xbe/0xf0 mm/kasan/report.c:588
strlen+0x7d/0xa0 lib/string.c:418
__fortify_strlen include/linux/fortify-string.h:210 [inline]
in4_pton+0xa3/0x3f0 net/core/utils.c:130
bond_option_arp_ip_targets_set+0xc2/0x910
drivers/net/bonding/bond_options.c:1201
__bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767
__bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792
bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817
bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156
dev_attr_store+0x54/0x80 drivers/base/core.c:2366
sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136
kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x96a/0xd80 fs/read_write.c:584
ksys_write+0x122/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
---[ end trace ]---
Fix it by adding a check of string length before using it.
Fixes: f9de11a165 ("bonding: add ip checks when store ip target")
Signed-off-by: Yue Sun <samsun1006219@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The use-after-free is actually in rswitch_tx_free(), which is inlined in
rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the
same pointer, the skb is first freed using dev_kfree_skb_any(), then the
value in skb->len is used to update the interface statistics.
Let's move around the instructions to use skb->len before the skb is
freed.
This bug is trivial to reproduce using KFENCE. It will trigger a splat
every few packets. A simple ARP request or ICMP echo request is enough.
Fixes: 271e015b91 ("net: rswitch: Add unmap_addrs instead of dma address in each desc")
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20240702210838.2703228-1-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 205c50306a ("wifi: wilc1000: fix RCU usage in connect path")
made sure that the IEs data was manipulated under the relevant RCU section.
Unfortunately, while doing so, the commit brought a faulty implicit cast
from int to u8 on the ies_len variable, making the parsing fail to be
performed correctly if the IEs block is larger than 255 bytes. This failure
can be observed with Access Points appending a lot of IEs TLVs in their
beacon frames (reproduced with a Pixel phone acting as an Access Point,
which brough 273 bytes of IE data in my testing environment).
Fix IEs parsing by removing this undesired implicit cast.
Fixes: 205c50306a ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jozef Hopko <jozef.hopko@altana.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240701-wilc_fix_ies_data-v1-1-7486cbacf98a@bootlin.com
Commit 750011e239 ("net: stmmac: Add support for HW-accelerated VLAN
stripping") enables MAC level VLAN tag stripping for all MAC cores, but
leaves set_hw_vlan_mode() and rx_hw_vlan() un-implemented for both gmac
and xgmac.
On gmac and xgmac, ethtool reports rx-vlan-offload is on, both MAC and
driver do nothing about VLAN packets actually, although VLAN works well.
Driver level stripping should be used on gmac and xgmac for now.
Fixes: 750011e239 ("net: stmmac: Add support for HW-accelerated VLAN stripping")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following is emitted when using idxd (DSA) dmanegine as the data
mover for ntb_transport that ntb_netdev uses.
[74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526
[74412.556784] caller is netif_rx_internal+0x42/0x130
[74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5
[74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024
[74412.581699] Call Trace:
[74412.584514] <TASK>
[74412.586933] dump_stack_lvl+0x55/0x70
[74412.591129] check_preemption_disabled+0xc8/0xf0
[74412.596374] netif_rx_internal+0x42/0x130
[74412.600957] __netif_rx+0x20/0xd0
[74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev]
[74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport]
[74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport]
[74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd]
[74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd]
[74412.634046] irq_thread_fn+0x21/0x60
[74412.638134] ? irq_thread+0xa8/0x290
[74412.642218] irq_thread+0x1a0/0x290
[74412.646212] ? __pfx_irq_thread_fn+0x10/0x10
[74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10
[74412.656117] ? __pfx_irq_thread+0x10/0x10
[74412.660686] kthread+0x100/0x130
[74412.664384] ? __pfx_kthread+0x10/0x10
[74412.668639] ret_from_fork+0x31/0x50
[74412.672716] ? __pfx_kthread+0x10/0x10
[74412.676978] ret_from_fork_asm+0x1a/0x30
[74412.681457] </TASK>
The cause is due to the idxd driver interrupt completion handler uses
threaded interrupt and the threaded handler is not hard or soft interrupt
context. However __netif_rx() can only be called from interrupt context.
Change the call to netif_rx() in order to allow completion via normal
context for dmaengine drivers that utilize threaded irq handling.
While the following commit changed from netif_rx() to __netif_rx(),
baebdf48c3 ("net: dev: Makes sure netif_rx() can be invoked in any context."),
the change should've been a noop instead. However, the code precedes this
fix should've been using netif_rx_ni() or netif_rx_any_context().
Fixes: 548c237c0a ("net: Add support for NTB virtual ethernet device")
Reported-by: Jerry Dai <jerry.dai@intel.com>
Tested-by: Jerry Dai <jerry.dai@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20240701181538.3799546-1-dave.jiang@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using MSI/INTx interrupt, the shared interrupts are still being
handled in the device remove routine, before free IRQs. So isb memory
is still read after it is freed. Thus move wx_free_isb_resources()
from txgbe_close() to txgbe_remove(). And fix the improper isb free
action in txgbe_open() error handling path.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename original txgbe_misc_irq_handle() to txgbe_misc_irq_thread_fn()
since it is the handle thread to wake up. And add the primary handler
to deal the case of MSI/INTx, because there is a schedule NAPI poll.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using MSI or INTx interrupts, request_irq() for pdev->irq will
conflict with request_threaded_irq() for txgbe->misc.irq, to cause
system crash. So remove txgbe_request_irq() for MSI/INTx case, and
rename txgbe_request_msix_irqs() since it only request for queue irqs.
Add wx->misc_irq_domain to determine whether the driver creates an IRQ
domain and threaded request the IRQs.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized.
Thus there will be kernel panic in wx_alloc_q_vectors() to allocate
queue vectors.
Fixes: 3f70318611 ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On vPro systems, the configuration of the I219-LM to achieve power
gating and S0ix residency is split between the driver and the CSME FW.
It was discovered that in some scenarios, where the network cable is
connected and then disconnected, S0ix residency is not always reached.
This was root-caused to a subset of I219-LM register writes that are not
performed by the CSME FW. Therefore, the driver should perform these
register writes on corporate setups, regardless of the CSME FW state.
This was discovered on Meteor Lake systems; however it is likely to
appear on other platforms as well.
Fixes: cc23f4f0b6 ("e1000e: Add support for Meteor Lake")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218589
Signed-off-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240628201754.2744221-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix UBSAN warnings that occur when using a system with 32 physical
cpu cores or more, or when the user defines a number of Ethernet
queues greater than or equal to FP_SB_MAX_E1x using the num_queues
module parameter.
Currently there is a read/write out of bounds that occurs on the array
"struct stats_query_entry query" present inside the "bnx2x_fw_stats_req"
struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h".
Looking at the definition of the "struct stats_query_entry query" array:
struct stats_query_entry query[FP_SB_MAX_E1x+
BNX2X_FIRST_QUEUE_QUERY_IDX];
FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and
has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3
meaning the array has a total size of 19.
Since accesses to "struct stats_query_entry query" are offset-ted by
BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet
queues should not exceed FP_SB_MAX_E1x (16). However one of these queues
is reserved for FCOE and thus the number of Ethernet queues should be set
to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if
it is not.
This is also described in a comment in the source code in
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition
of FP_SB_MAX_E1x. Below is the part of this explanation that it important
for this patch
/*
* The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is
* control by the number of fast-path status blocks supported by the
* device (HW/FW). Each fast-path status block (FP-SB) aka non-default
* status block represents an independent interrupts context that can
* serve a regular L2 networking queue. However special L2 queues such
* as the FCoE queue do not require a FP-SB and other components like
* the CNIC may consume FP-SB reducing the number of possible L2 queues
*
* If the maximum number of FP-SB available is X then:
* a. If CNIC is supported it consumes 1 FP-SB thus the max number of
* regular L2 queues is Y=X-1
* b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor)
* c. If the FCoE L2 queue is supported the actual number of L2 queues
* is Y+1
* d. The number of irqs (MSIX vectors) is either Y+1 (one extra for
* slow-path interrupts) or Y+2 if CNIC is supported (one additional
* FP interrupt context for the CNIC).
* e. The number of HW context (CID count) is always X or X+1 if FCoE
* L2 queue is supported. The cid for the FCoE L2 queue is always X.
*/
However this driver also supports NICs that use the E2 controller which can
handle more queues due to having more FP-SB represented by FP_SB_MAX_E2.
Looking at the commits when the E2 support was added, it was originally
using the E1x parameters: commit f2e0899f0f ("bnx2x: Add 57712 support").
Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver
was later updated to take full advantage of the E2 instead of having it be
limited to the capabilities of the E1x. But as far as we can tell, the
array "stats_query_entry query" was still limited to using the FP-SB
available to the E1x cards as part of an oversignt when the driver was
updated to take full advantage of the E2, and now with the driver being
aware of the greater queue size supported by E2 NICs, it causes the UBSAN
warnings seen in the stack traces below.
This patch increases the size of the "stats_query_entry query" array by
replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle
both types of NICs.
Stack traces:
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11
index 20 is out of range for type 'stats_query_entry [19]'
CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic
#202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
BIOS P89 10/21/2019
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
dump_stack+0x10/0x20
__ubsan_handle_out_of_bounds+0xcb/0x110
bnx2x_prep_fw_stats_req+0x2e1/0x310 [bnx2x]
bnx2x_stats_init+0x156/0x320 [bnx2x]
bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x]
bnx2x_nic_load+0x8e8/0x19e0 [bnx2x]
bnx2x_open+0x16b/0x290 [bnx2x]
__dev_open+0x10e/0x1d0
RIP: 0033:0x736223927a0a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca
64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a
RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003
RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0
R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00
</TASK>
---[ end trace ]---
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1546:11
index 28 is out of range for type 'stats_query_entry [19]'
CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic
#202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
BIOS P89 10/21/2019
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
dump_stack+0x10/0x20
__ubsan_handle_out_of_bounds+0xcb/0x110
bnx2x_prep_fw_stats_req+0x2fd/0x310 [bnx2x]
bnx2x_stats_init+0x156/0x320 [bnx2x]
bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x]
bnx2x_nic_load+0x8e8/0x19e0 [bnx2x]
bnx2x_open+0x16b/0x290 [bnx2x]
__dev_open+0x10e/0x1d0
RIP: 0033:0x736223927a0a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca
64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a
RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003
RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0
R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00
</TASK>
---[ end trace ]---
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1895:8
index 29 is out of range for type 'stats_query_entry [19]'
CPU: 13 PID: 163 Comm: kworker/u96:1 Not tainted 6.9.0-060900rc7-generic
#202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
BIOS P89 10/21/2019
Workqueue: bnx2x bnx2x_sp_task [bnx2x]
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
dump_stack+0x10/0x20
__ubsan_handle_out_of_bounds+0xcb/0x110
bnx2x_iov_adjust_stats_req+0x3c4/0x3d0 [bnx2x]
bnx2x_storm_stats_post.part.0+0x4a/0x330 [bnx2x]
? bnx2x_hw_stats_post+0x231/0x250 [bnx2x]
bnx2x_stats_start+0x44/0x70 [bnx2x]
bnx2x_stats_handle+0x149/0x350 [bnx2x]
bnx2x_attn_int_asserted+0x998/0x9b0 [bnx2x]
bnx2x_sp_task+0x491/0x5c0 [bnx2x]
process_one_work+0x18d/0x3f0
</TASK>
---[ end trace ]---
Fixes: 50f0a562f8 ("bnx2x: add fcoe statistics")
Signed-off-by: Ghadi Elie Rahme <ghadi.rahme@canonical.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240627111405.1037812-1-ghadi.rahme@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ConnectX devices lack ability to count payload data byte size which is
needed for SA to return to libreswan for rekeying.
As a solution let's approximate that by decreasing headers size from
total size counted by flow steering. The calculation doesn't take into
account any other headers which can be in the packet (e.g. IP extensions).
Fixes: 5a6cddb89b ("net/mlx5e: Update IPsec per SA packets/bytes count")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPsec SA statistics presents successfully decrypted and encrypted
packet and bytes, and not total handled by this SA. So update the
calculation logic to take into account failures.
Fixes: 6fb7f94087 ("net/mlx5e: Connect mlx5 IPsec statistics with XFRM core")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the cited commit, mqprio_rl cleanup and free are mistakenly removed
in mlx5e_priv_cleanup(), and it causes the leakage of host memory and
firmware SCHEDULING_ELEMENT objects while changing eswitch mode. So,
add them back.
Fixes: 0bb7228f70 ("net/mlx5e: Fix mqprio_rl handling on devlink reload")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
