These limits have been recently updated, from 8 to:
- 64 for the subflows and accepted add_addr
- 255 for the MPTCP endpoints
These modifications validate the new limits, but are also compatible
with the previous ones, to be able to continue to validate stable kernel
using the last version of the selftests. That's why new variables are
now used instead of hard-coded values.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-7-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The limits have been recently increased, it is required to validate that
having 64 subflows is allowed.
Here, both the client and the server have 8 network interfaces. The
server has 8 endpoints marked as 'signal' to announce all its v4
addresses. The client also has 8 endpoints, but marked as 'subflow' and
'fullmesh' in order to create 8 subflows to each address announced by
the server. This means 63 additional subflows will be created after the
initial one.
If it is not possible to increase the limits to 64, it means an older
kernel version is being used, and the test is skipped.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-6-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, 4 network interfaces are created per subtest in a dedicated
net namespace. Each netns has a dedicated pair of v4 and v6 addresses.
Future tests will need more.
Simply always creating more network interfaces per test will increase
the execution time for all other tests, for no other benefits. So now it
is possible to change this number only when needed, by setting ifaces_nr
when calling 'reset' and 'init_shapers', e.g.
ifaces_nr=8 reset "Subtest title"
ifaces_nr=8 init_shapers
Note that it might also be interesting to decrease the default value to
2 to reduce the setup time, especially when a debug kernel config is
being used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-5-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A race in stop_pcaps is possible if the test completes and then
times out while waiting for the tcpdump process to exit. The
signal handler may fire again and needlessly call stop_pcap a
second time. Fix this by disabling the alarm after normal
test completion.
Also if there are no tcpdump processes to wait on, stop_pcaps can
just exit. This avoids misleading prints when there are no procs
to collect dumps from.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260507233213.556182-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since rds self tests no longer has a default folder, users must
specify a log collection folder if they want to collect logs.
Currently the log folder is deleted and recreated, but this can
be dangerous if the user exports RDS_LOG_DIR=/tmp or /var/log.
This patch corrects the clean up to delete only rds log artifacts
from the log folder, and further prefixes rds specific logs as rds*
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260507233213.556182-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Apply two cleanups suggested by Stanislav and bobby on the original
selftest series:
- Reorder local variable declarations into reverse christmas-tree
order (longest line first). Because that ordering puts socklen_t
optlen before the variable whose size it stores, the
"optlen = sizeof(...)" initializer is moved out of the declaration
to a plain assignment in the test body, as Stanislav suggested.
- Add ASSERT_EQ(optlen, ...) on every error path so the value the
kernel writes back to the userspace optlen is pinned down even
when the syscall returns -1. With do_sock_getsockopt() now writing
opt->optlen back to userspace unconditionally, asserting that the
netlink/vsock error paths leave the original input length untouched
guards against future regressions.
Bobby Eshleman pointed out that
SO_VM_SOCKETS_CONNECT_TIMEOUT_NEW/OLD return a sock_timeval-shaped
payload (16 bytes on 64-bit), which is wider than the u64 case
already covered. Add four tests that exercise this path:
- connect_timeout_new_exact exact-size buffer
- connect_timeout_new_oversize_clamped oversize buffer, clamped
- connect_timeout_new_undersize undersize -> -EINVAL, optlen
untouched
- connect_timeout_old_exact exact-size buffer for OLD optname
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Suggested-by: Bobby Eshleman <bobbyeshleman@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-5-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for the protodown mechanism.
Five test cases are included:
1. Basic protodown toggling: Verify that setting protodown on macvlan
results in DOWN operational state and clearing it restores UP.
2. Same as the previous test case, but with vxlan.
3. Protodown reasons: Verify that protodown cannot be cleared while
there are active protodown reasons, but can be cleared once all
reasons are removed.
4. Protodown with lower device being toggled: Verify that toggling the
lower device's carrier while protodown is on does not cause the
macvlan to gain carrier.
5. Protodown with lower device down: Verify that toggling protodown
while the lower device has no carrier does not cause the macvlan to
gain carrier.
Note that the last two test cases fail without "net: Do not turn on
carrier when protodown is on" and "net: Do not unconditionally turn on
carrier when turning off protodown":
# ./protodown.sh
TEST: Basic protodown on/off with macvlan [ OK ]
TEST: Basic protodown on/off with vxlan [ OK ]
TEST: Protodown reasons [ OK ]
TEST: Protodown with lower device toggled [FAIL]
Macvlan operational state is not DOWN despite protodown
TEST: Protodown with lower device down [FAIL]
Macvlan is not LOWERLAYERDOWN after clearing protodown
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260507105906.891817-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, IPsec, Bluetooth and WiFi.
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that IPv6
itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi:
- cw1200: revert "Fix locking in error paths"
- ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix:
- fix an issue between garbage collection and PEEK
- fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)"
* tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (190 commits)
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
net: sparx5: fix wrong chip ids for TSN SKUs
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
tcp: Fix dst leak in tcp_v6_connect().
ipmr: Call ipmr_fib_lookup() under RCU.
net: phy: broadcom: Save PHY counters during suspend
net/smc: fix missing sk_err when TCP handshake fails
af_unix: Reject SIOCATMARK on non-stream sockets
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
eth: fbnic: fix double-free of PCS on phylink creation failure
net: ethernet: cortina: Drop half-assembled SKB
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
selftests: mptcp: check output: catch cmd errors
mptcp: pm: prio: skip closed subflows
mptcp: pm: ADD_ADDR rtx: return early if no retrans
mptcp: pm: ADD_ADDR rtx: skip inactive subflows
mptcp: pm: ADD_ADDR rtx: resched blocked ADD_ADDR quicker
mptcp: pm: ADD_ADDR rtx: free sk if last
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
mptcp: pm: ADD_ADDR rtx: fix potential data-race
...
When pm_netlink.sh is executed with '-i', 'ip mptcp' is used instead of
'pm_nl_ctl'. IPRoute2 doesn't support the 'unknown' flag, which has only
been added to 'pm_nl_ctl' for this specific check: to ensure that the
kernel ignores such unsupported flag.
No reason to add this flag to 'ip mptcp'. Then, this check should be
skipped when 'ip mptcp' is used.
Fixes: 0cef6fcac2 ("selftests: mptcp: ip_mptcp option for more scripts")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-11-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using '${?}' inside the if-statement to check the returned value from
the command that was evaluated as part of the if-statement is not
correct: here, '${?}' will be linked to the previous instruction, not
the one that is expected here (${cmd}).
Instead, simply mark the error, except if an error is expected. If
that's the case, 1 can be passed as the 4th argument of this helper.
Three checks from pm_netlink.sh expect an error.
While at it, improve the error message when the command unexpectedly
fails or succeeds.
Note that we could expect a specific returned value, but the checks
currently expecting an error can be used with 'ip mptcp' or 'pm_nl_ctl',
and these two tools don't return the same error code.
Fixes: 2d0c1d27ea ("selftests: mptcp: add mptcp_lib_check_output helper")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-10-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2026-05-05
1. Fix an IPv6 encapsulation error path that leaked route references
when UDPv6 ESP decapsulation resolved to an error route.
From Yilin Zhu.
2. Fix AH with ESN on async crypto paths by accounting for the extra
high-order sequence number when reconstructing the temporary
authentication layout in the completion callbacks.
From Michael Bomarito.
3. Fix XFRM output so it does not overwrite already-correct inner header
pointers when a tunnel layer such as VXLAN has already saved them.
The fix comes with new selftests. From Cosmin Ratiu.
4. Add the missing native payload size entry for XFRM_MSG_MAPPING in the
compat translation path. From Ruijie Li.
5. Harden __xfrm_state_delete() against repeated or inconsistent unhashing
of state list nodes by keying the removal on actual list membership and
using delete-and-init helpers. From Michal Kosiorek.
6. Prevent ESP from decrypting shared splice-backed skb fragments in place
by marking UDP splice frags as shared and forcing copy-on-write in ESP
input when needed. From Kuan-Ting Chen.
* tag 'ipsec-2026-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: esp: avoid in-place decrypt on shared skb frags
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
xfrm: provide message size for XFRM_MSG_MAPPING
xfrm: Don't clobber inner headers when already set
tools/selftests: Add a VXLAN+IPsec traffic test
tools/selftests: Use a sensible timeout value for iperf3 client
xfrm: ah: account for ESN high bits in async callbacks
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
====================
Link: https://patch.msgid.link/20260505132326.1362733-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antonio Quartulli says:
====================
Includes changes:
* ensure MAC header offset is reset before delivering packet
* ensure gro_cells_receive() and dstats_dev_add() are called
with BH disabled
* reduce ping count in selftest to ensure it completes within
timeout
* tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next:
selftests: ovpn: reduce ping count in test.sh
ovpn: ensure packet delivery happens with BH disabled
ovpn: reset MAC header before passing skb up
====================
Link: https://patch.msgid.link/20260504230305.2681646-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch updates the rds selftests output to be TAP compliant.
Use ksft_pr() to mark debug output with a leading '# ' so that TAP
parsers treat it as commentary, and convert all informational print()
calls to use ksft_pr(). sys.exit(0) is changed to os._exit(0) to
avoid duplicate prints from the buffered TAP output. The console
output from the tcpdump subprocess is silenced, and the gcov console
output is redirected to a gcovr.log.
Finally adjust the exit path so that the hash check loop sets a
return code instead exiting directly. Then print the TAP results
and totals lines before exiting.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-11-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
debugfs is not mounted automatically in a virtme-ng guest, so the
gcov data copy from /sys/kernel/debug/gcov/ silently finds nothing
depending on whether debugfs is mounted by default on the host OS.
Fix this by mounting debugfs in run.sh before copying the gcda
files.
Finally when invoked through the kselftest runner, the working
directory is the test directory rather than the kernel source root.
gcovr defaults --root to the current working directory, which causes
it to filter out all coverage data for files under net/rds/ since
they are not under the test directory. Fix this by passing --root
to gcovr explicitly.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-10-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The timeout signal handler for the rds selftests currently just
exits when the time limit is exceeded, and forgets to stop the
network dumps. Fix this by hoisting the tcpdump terminate commands
into a helper function, and call it from the signal handler before
exiting
Bound proc.wait() with a timeout (and fall back to proc.kill())
so an unresponsive tcpdump cannot hang the timeout path itself.
We also pop() tcpdump_procs as we iterate, so stop_pcaps() is safe
to call from both the normal cleanup path and the signal handler,
since the second invocation simply has nothing to do
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-9-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch modifies rds selftests to use the environment variable
SUDO_USER for tcpdumps if it is set. This is needed to avoid chown
operations on the vng 9pfs which is not supported. Passing a user
listed in sudoers avoids the tcpdump privilege drop which may
otherwise create empty pcaps
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-7-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a few pylint errors in test.py. Remove unused exception
variables from except blocks, and disable warnings for imports that cannot
appear at the start of the module. Also disable warnings for the
tcpdump processes. The suggestion to use a with block does not apply
here since the process needs to outlive the parent to collect the dumps.
Lastly add the module docstring at the top of the module.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 400s time out was originally developed under a leaner
kernel config that booted much faster than a default config.
Boot up is included as part of the over all test runtime, as
well as any log collection done when the test is complete.
A slower config combined with the gcov enabled test means
we'll need more time to accommodate the boot up and log
collection. So, bump time out to 800s.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for extending to pacing hardware offload, convert the
so_txtime.sh test to a drv-net test that can be run against netdevsim
and real hardware.
Also update so_txtime.c to not exit on first failure, but run to
completion and report exit code there. This helps with debugging
unexpected results, especially when processing multiple packets,
as happens in the "reverse_order" testcase.
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
v6 -> v7
- update test to use new argument expect_fail
- v6 received Reviewed-by, but dropped due to above (minor) change
v5 -> v6
- fix order in tools/testing/selftests/drivers/net/config
v4 -> v5
- move qdisc setup/restore into each test
- add tc to utils.py (separate patch)
- test expected failure (separate patch)
- fix pylint
- convert fail to pass for timing errors if KSFT_MACHINE_SLOW
(cmd does not special case KSFT_SKIP process returncode yet)
Responses to sashiko review
- The test converts per packet failure to errors, to continue
testing other packets, but other error() cases are not in scope.
- The test starts sender and receiver at an absolute future time,
like the original test. This assumes ~msec scale sync'ed clocks.
- The tc qdisc replace command works fine with noqueue. Tested
manually.
v3 -> v4
- restore original qdisc after test
- drop unnecessary underscore in tap test names
v2 -> v3
- Makefile: so_txtime from YNL_GEN_FILES to TEST_GEN_FILES (Sashiko, NIPA)
v1 -> v2
- move so_txtime.c for net/lib to drivers/net (Jakub)
- fix drivers/net/config order (Jakub)
- detect passing when failure is expected (Jakub, Sashiko)
- pass pylint --disable=R (Jakub)
- only call ksft_run once (Jakub)
- do not sleep if waiting time is negative (Sashiko)
- add \n when converting error() to fprintf() (Sashiko)
- 4 space indentation, instead of 2 space
- increase sync delay from 100 to 200ms, to fix rare vng flakes
Link: https://patch.msgid.link/20260504174056.565319-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support negative tests, where cmd raises an exception if the command
succeeded.
Add optional argument expect_fail to cmd and bkg. Where fail fails the
test on unexpected error, expect_fail fails it on unexpected success.
Both fail on negative return code. Python subprocess may set a
negative return code on process crash or timeout. Those are never
anticipated failures.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260504174056.565319-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There were a few issues found with the tunnel vport types around the
vport destruction code. Add some basic tests, so at least we know that
they can be properly added and removed without obvious issues.
The test creates OVS datapath, adds a non-LWT tunnel port, makes sure
they are created, and then removes the datapath and waits for all the
ports to be gone.
The dpctl script had a few bugs in the none-lwt tunnel creation code,
so fixing them as well to make the testing possible:
- The type of the --lwt option changed in order to properly disable it.
- Removed byte order conversion for the port numbers, as the value
supposed to be in the host order.
- Added missing 'gre' choice for the tunnel type.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260430233848.440994-3-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enhance vlmc_query_intvl_test and vlmc_query_response_intvl_test in
bridge_vlan_mcast.sh to validate IGMPv3/MLDv2 protocol compliance for
MRC and QQIC field encoding across both linear and exponential ranges.
TEST: Vlan multicast snooping enable [ OK ]
TEST: Vlan mcast_query_interval global option default value [ OK ]
TEST: Number of tagged IGMPv2 general query [ OK ]
TEST: IGMPv3 QQIC linear value 60(s) [ OK ]
TEST: MLDv2 QQIC linear value 60(s) [ OK ]
TEST: IGMPv3 QQIC non linear value 160(s) [ OK ]
TEST: MLDv2 QQIC non linear value 160(s) [ OK ]
TEST: Vlan mcast_query_response_interval global option default value [ OK ]
TEST: IGMPv3 MRC linear value of 60(x0.1s) [ OK ]
TEST: MLDv2 MRC linear value of 24000(ms) [ OK ]
TEST: IGMPv3 MRC non linear value of 240(x0.1s) [ OK ]
TEST: MLDv2 MRC non linear value of 48000(ms) [ OK ]
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-6-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a single kselftest covering the proto_ops getsockopt_iter
conversions for AF_NETLINK and AF_VSOCK, using one fixture per protocol:
netlink:
NETLINK_PKTINFO covers the flag-style int path (exact size, oversize
clamp, undersize -EINVAL); NETLINK_LIST_MEMBERSHIPS covers the
size-discovery path that always reports the required buffer length back
via optlen, even when the user buffer is too small to receive any group
bits.
vsock:
SO_VM_SOCKETS_BUFFER_SIZE covers the u64 path (exact size, oversize
clamp, undersize -EINVAL).
Each fixture also exercises an unknown optname and a bogus level so
the returned-length / errno semantics preserved by the sockopt_t
conversion are pinned down.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260501-getsock_one-v1-3-810ce23ea70e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull kselftest fixes from Shuah Khan:
- Fix extra test number increment in ksft_exit_skip() that results in
incorrect KTAP result
- Fix regression introduced by addition of explicit constructor orders
for fixture tests. This addition broke the ordering of those relative
to non-fixture tests and the reverse-constructor-order detection
* tag 'linux_kselftest-fixes-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: harness: Restore order of test functions
selftests: kselftest: fix wrong test number in ksft_exit_skip
The second stage of test.sh ("run baseline data traffic") performs a
basic connectivity check with ping -qfc 500 -w 3. On slower CI
instances this is too strict for TCP: the RTT is high enough that 500
echo requests do not reliably complete within 3 seconds, so the stage
flakes and the test fails even though the ovpn setup is healthy.
Reduce the packet count to 100 for both the plain and 3000-byte pings in
that stage. This still verifies peer setup, key exchange, routing, and
data-path traffic, without making the basic connectivity check depend on
timing out under load.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Create 4 test cases:
- Force red to dequeue from its child's gso_skb with qfq leaf
- Force sfb to dequeue from its child's gso_skb with qfq leaf
- Force red to dequeue from its child's gso_skb with dualpi2 leaf
- Force sfb to dequeue from its child's gso_skb with dualpi2 leaf
All of them have tbf followed by red (or sfb) followed by qfq (or
dualpi2). Since tbf calls its child's peek followed by
qdisc_dequeue_peeked, it will force red/sfb to call their child's peek.
In this case, since the child (qfq/dualpi2) has qdisc_peek_dequeued as
its peek callback, the packet will be stored in its gso_skb queue. During
the subsequent call to qdisc_dequeue_peeked, red/sfb will have to dequeue
from the child's gso_skb to retrieve the packet.
Not doing so will cause a NULL ptr deref which was happening before a
recent fix.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260430152957.194015-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without the previous commit, TCP failed to switch to alternative
IPv6 routes immediately upon carrier loss.
It would persist with the dead route until reaching the threshold
net.ipv4.tcp_retries1, leading to unnecessary delays in failover.
Let's add a selftest for this scenario to ensure TCP fails over
immediately upon a carrier loss event.
Before:
TEST: TCP IPv4 failover [ OK ]
TEST: TCP IPv6 failover [FAIL]
After:
TEST: TCP IPv4 failover [ OK ]
TEST: TCP IPv6 failover [ OK ]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sagarika Sharma <sharmasagarika@google.com>
Link: https://patch.msgid.link/20260430200909.527827-3-sharmasagarika@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Certain devices which support ntuple-filters do not enable the feature
by default. The existing tests will skip (if they check for the feature),
or fail if they blindly attempt to install rules. Therefore, attempt to turn
on ntuple-filters if the device supports them.
Signed-off-by: Dimitri Daskalakis <daskald@meta.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260430165217.3700469-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull arm64 fixes from Catalin Marinas:
- Avoid writing an uninitialised stack variable to POR_EL0 on sigreturn
if the poe_context record is absent
- Reserve one more page for the early 4K-page kernel mapping to cover
the extra [_text, _stext) split introduced by the non-executable
read-only mapping
- Force the arch_local_irq_*() wrappers to be __always_inline so that
noinstr entry and idle paths cannot call out-of-line, instrumentable
copies
- Fix potential sign extension in the arm64 SCS unwinder's DWARF
advance_loc4 decoding
- Tolerate arm64 ACPI platforms with only WFI and no deeper PSCI idle
states, restoring cpuidle registration on such systems
- Include the UAPI <asm/ptrace.h> header in the arm64 GCS libc test
rather than carrying a duplicate struct user_gcs definition (the
original #ifdef NT_ARM_GCS was wrong to cover the structure
definition as it would be masked out if the toolchain defined it)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Preserve POR_EL0 if poe_context is missing
arm64: Reserve an extra page for early kernel mapping
kselftest/arm64: Include <asm/ptrace.h> for user_gcs definition
ACPI: arm64: cpuidle: Tolerate platforms with no deep PSCI idle states
arm64/irqflags: __always_inline the arch_local_irq_*() helpers
arm64/scs: Fix potential sign extension issue of advance_loc4
Pull MM fixes from Andrew Morton:
"20 hotfixes. All are for MM (and for MMish maintainers). 9 are
cc:stable and the remainder are for post-7.0 issues or aren't deemed
suitable for backporting.
There are two DAMON series from SeongJae Park which address races
which could lead to use-after-free errors, and avoid the possibility
of presenting stale parameter values to users"
* tag 'mm-hotfixes-stable-2026-04-30-15-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memcontrol: fix rcu unbalance in get_non_dying_memcg_end()
mm/userfaultfd: detect VMA type change after copy retry in mfill_copy_folio_retry()
MAINTAINERS: remove stale kdump project URL
mm/damon/stat: detect and use fresh enabled value
mm/damon/lru_sort: detect and use fresh enabled and kdamond_pid values
mm/damon/reclaim: detect and use fresh enabled and kdamond_pid values
selftests/mm: specify requirement for PROC_MEM_ALWAYS_FORCE=y
mm/damon/sysfs-schemes: protect path kfree() with damon_sysfs_lock
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
MAINTAINERS: update Li Wang's email address
MAINTAINERS, mailmap: update email address for Qi Zheng
MAINTAINERS: update Liam's email address
mm/hugetlb_cma: round up per_node before logging it
MAINTAINERS: fix regex pattern in CORE MM category
mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap()
mm: start background writeback based on per-wb threshold for strictlimit BDIs
kho: fix error handling in kho_add_subtree()
liveupdate: fix return value on session allocation failure
mailmap: update entry for Dan Carpenter
vmalloc: fix buffer overflow in vrealloc_node_align()
kselftest includes kernel uAPI headers with option:
-isystem $(top_srcdir)/usr/include
Include <asm/ptrace.h> in libc-gcs.c for the definition of struct
user_gcs from the uAPI headers, and remove the redundant definition in
gcs-util.h. This fixes a compilation error on systems where the
toolchain defines NT_ARM_GCS.
Fixes: a505a52b4e ("kselftest/arm64: Add a GCS test program built with the system libc")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
These tests check syncookie mode is able to reconstruct some
client options when TCP TS are used:
- wscale option.
- sackOK.
- MSS (in a limited way, especially for IPv4).
- ECN : not enabled.
Note that IPv4 and IPv6 have different msstab[] values:
IPv4 msstab[4] = { 536, 1300, 1440, 1460 }
IPv6 msstab[4] = { 1280 - 60, 1480 - 60, 1500 - 60, 9000 - 60 }
IPv4 is currently capping SND_MSS to 1460, even on a 9K MTU network.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20260430021444.2929534-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test cases to verify that ARP probes and DAD Neighbor Solicitations
are handled correctly by the bridge neighbor suppression feature.
When neighbor suppression is enabled on a bridge VXLAN port, the bridge
should reply to ARP/NS messages on behalf of remote hosts when both FDB
and neighbor entries exist, and the answer is known. However, when
either the FDB or the neighbor exists, ARP probes / DAD NS should be
treated like regular ARP requests / NS and flood to VXLAN.
Add two new test functions:
neigh_suppress_arp_probe(): Tests ARP probe handling by triggering
duplicate address detection using arping -D. Verifies that probes are
flooded when the bridge doesn't know the answer, and suppressed when FDB
and neighbor entries exist.
neigh_suppress_dad_ns(): Tests DAD NS handling by constructing DAD NS
packets using mausezahn and verifies correct flooding/suppression
behavior.
Before the previous patch:
$ ./test_bridge_neigh_suppress.sh -t "neigh_suppress_arp_probe neigh_suppress_dad_ns"
Per-port ARP probe suppression
------------------------------
TEST: ARP probe suppression [ OK ]
TEST: "neigh_suppress" is on [ OK ]
TEST: ARP probe suppression [FAIL]
TEST: FDB and neighbor entry installation [ OK ]
TEST: arping [FAIL]
TEST: ARP probe suppression [FAIL]
TEST: neighbor removal [ OK ]
TEST: ARP probe suppression [FAIL]
TEST: "neigh_suppress" is off [ OK ]
TEST: ARP probe suppression [FAIL]
Per-port DAD NS suppression
---------------------------
TEST: DAD NS suppression [ OK ]
TEST: "neigh_suppress" is on [ OK ]
TEST: DAD NS suppression [FAIL]
TEST: FDB and neighbor entry installation [ OK ]
TEST: DAD NS suppression [FAIL]
TEST: neighbor removal [ OK ]
TEST: DAD NS suppression [FAIL]
TEST: DAD NS proxy NA reply [FAIL]
TEST: "neigh_suppress" is off [ OK ]
TEST: DAD NS suppression [FAIL]
Tests passed: 10
Tests failed: 10
After the previous patch:
$ ./test_bridge_neigh_suppress.sh -t "neigh_suppress_arp_probe neigh_suppress_dad_ns"
Per-port ARP probe suppression
------------------------------
TEST: ARP probe suppression [ OK ]
TEST: "neigh_suppress" is on [ OK ]
TEST: ARP probe suppression [ OK ]
TEST: FDB and neighbor entry installation [ OK ]
TEST: arping [ OK ]
TEST: ARP probe suppression [ OK ]
TEST: neighbor removal [ OK ]
TEST: ARP probe suppression [ OK ]
TEST: "neigh_suppress" is off [ OK ]
TEST: ARP probe suppression [ OK ]
Per-port DAD NS suppression
---------------------------
TEST: DAD NS suppression [ OK ]
TEST: "neigh_suppress" is on [ OK ]
TEST: DAD NS suppression [ OK ]
TEST: FDB and neighbor entry installation [ OK ]
TEST: DAD NS suppression [ OK ]
TEST: neighbor removal [ OK ]
TEST: DAD NS suppression [ OK ]
TEST: DAD NS proxy NA reply [ OK ]
TEST: "neigh_suppress" is off [ OK ]
TEST: DAD NS suppression [ OK ]
Tests passed: 20
Tests failed: 0
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260429062405.1386417-3-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- ipmr: free mr_table after RCU grace period.
Previous releases - regressions:
- core: add net_iov_init() and use it to initialize ->page_type
- sched: taprio: fix NULL pointer dereference in class dump
- netfilter: nf_tables:
- use list_del_rcu for netlink hooks
- fix strict mode inbound policy matching
- tcp: make probe0 timer handle expired user timeout
- vrf: fix a potential NPD when removing a port from a VRF
- eth: ice:
- fix NULL pointer dereference in ice_reset_all_vfs()
- fix infinite recursion in ice_cfg_tx_topo via ice_init_dev_hw
Previous releases - always broken:
- page_pool: fix memory-provider leak in error path
- sched: sch_cake: annotate data-races in cake_dump_stats()
- mptcp: fix scheduling with atomic in timestamp sockopt
- psp: check for device unregister when creating assoc
- tls: fix strparser anchor skb leak on offload RX setup failure
- eth:
- stmmac: prevent NULL deref when RX memory exhausted
- airoha: do not read uninitialized fragment address
- rtl8150: fix use-after-free in rtl8150_start_xmit()
Misc:
- add Ido Schimmel as IPv4/IPv6 maintainer
- add David Heidelberg as NFC subsystem maintainer"
* tag 'net-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
net/sched: cls_flower: revert unintended changes
sfc: fix error code in efx_devlink_info_running_versions()
net: tls: fix strparser anchor skb leak on offload RX setup failure
ice: add dpll peer notification for paired SMA and U.FL pins
ice: fix missing dpll notifications for SW pins
dpll: export __dpll_pin_change_ntf() for use under dpll_lock
ice: fix SMA and U.FL pin state changes affecting paired pin
ice: fix missing SMA pin initialization in DPLL subsystem
ice: fix infinite recursion in ice_cfg_tx_topo via ice_init_dev_hw
ice: fix NULL pointer dereference in ice_reset_all_vfs()
iavf: add VIRTCHNL_OP_ADD_VLAN to success completion handler
iavf: wait for PF confirmation before removing VLAN filters
iavf: stop removing VLAN filters from PF on interface down
iavf: rename IAVF_VLAN_IS_NEW to IAVF_VLAN_ADDING
page_pool: fix memory-provider leak in page_pool_create_percpu() error path
bonding: 3ad: implement proper RCU rules for port->aggregator
net: airoha: Do not return err in ndo_stop() callback
hv_sock: fix ARM64 support
MAINTAINERS: update the IPv4/IPv6 entry and add Ido Schimmel
selftests: drv-net: clarify linters and frameworks in README
...
Currently the kernel's TCP-AO implementation does the MAC and KDF
computations using the crypto_ahash API. This API is inefficient and
difficult to use, and it has required extensive workarounds in the form
of per-CPU preallocated objects (tcp_sigpool) to work at all.
Let's use lib/crypto/ instead. This means switching to straightforward
stack-allocated structures, virtually addressed buffers, and direct
function calls. It also means removing quite a bit of error handling.
This makes TCP-AO quite a bit faster.
This also enables many additional cleanups, which later commits will
handle: removing tcp-sigpool, removing support for crypto_tfm cloning,
removing more error handling, and replacing more dynamically-allocated
buffers with stack buffers based on the now-statically-known limits.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-3-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RFC 5926 (https://datatracker.ietf.org/doc/html/rfc5926) specifies the
use of AES-128-CMAC and HMAC-SHA1 with TCP-AO. This includes a
specification for how traffic keys shall be derived for each algorithm.
Support for any other algorithms with TCP-AO isn't standardized, though
an expired Internet Draft (a work-in-progress document, not a standard)
from 2019 does propose adding HMAC-SHA256 support:
https://datatracker.ietf.org/doc/html/draft-nayak-tcp-sha2-03
Since both documents specify the KDF for each algorithm individually, it
isn't necessarily clear how any other algorithm should be integrated.
Nevertheless, the Linux implementation of TCP-AO allows userspace to
specify the MAC algorithm as a string tcp_ao_add::alg_name naming either
"cmac(aes128)" or an arbitrary algorithm in the crypto_ahash API. The
set of valid strings is undocumented. The implementation assumes that
"cmac(aes128)" is the only algorithm that requires an entropy extraction
step and that all algorithms accept keys with length equal to the
untruncated MAC; thus, arbitrary HMAC algorithms probably do work, but
some other MAC algorithms like AES-256-CMAC have never actually worked.
Unfortunately, this undocumented string allows many obsolete, insecure,
or redundant algorithms. For example, "hmac(md5)" and the
non-cryptographic "crc32" are accepted. It also ties the implementation
to crypto_ahash and requires that most memory be dynamically allocated,
making the implementation unnecessarily complex and inefficient. Still
furthermore, this implementation requires the crypto API to support
"transformation cloning", whose only user is this feature.
Fortunately, it's very likely that only a few algorithms are actually
used in practice. Let's restrict the set of allowed algorithms to
"cmac(aes128)" (or "cmac(aes)" with keylen=16), "hmac(sha1)", and
"hmac(sha256)". The first two are the actually standard ones, while
HMAC-SHA256 seems like a reasonable algorithm to continue supporting as
a Linux extension, considering the Internet Draft for it and the fact
that SHA-256 is the usual choice of upgrade from the outdated SHA-1.
If any other algorithm ever turns out to be needed, e.g. HMAC-SHA512, it
can of course be (re-)added in library form. However, note that the TCP
options space limits TCP-AO MACs to 20 bytes (160 bits) anyway, which
limits the potential benefit of any further upgrade to the algorithm.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-2-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Minor clarifications in the README:
- call out what linters we expect to be clean
- make it clear that by "frameworks" we mean code under lib/
not just factoring code out in the same file
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
