I wrote:
"Serial driver fixes for 4.19-rc7
Here are 3 small serial driver fixes for 4.19-rc7
- 2 sh-sci bugfixes for reported issues
- a revert of the PM handling for the 8250_dw code
All of these have been in linux-next with no reported issues."
* tag 'tty-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: sh-sci: Allow for compressed SCIF address"
Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE"
Revert "serial: 8250_dw: Fix runtime PM handling"
Pull irqchip updates from Marc Zyngier:
- kexec/kdump support for EFI-based GICv3 platforms
- Marvell SEI support
- QC PDC fixes
- GIC cleanups and optimizations
- DT updates
[ tglx: Dropped the madera driver as it breaks the build ]
Dave writes:
"Networking fixes:
1) Fix truncation of 32-bit right shift in bpf, from Jann Horn.
2) Fix memory leak in wireless wext compat, from Stefan Seyfried.
3) Use after free in cfg80211's reg_process_hint(), from Yu Zhao.
4) Need to cancel pending work when unbinding in smsc75xx otherwise
we oops, also from Yu Zhao.
5) Don't allow enslaving a team device to itself, from Ido Schimmel.
6) Fix backwards compat with older userspace for rtnetlink FDB dumps.
From Mauricio Faria.
7) Add validation of tc policy netlink attributes, from David Ahern.
8) Fix RCU locking in rawv6_send_hdrinc(), from Wei Wang."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
net: mvpp2: Extract the correct ethtype from the skb for tx csum offload
ipv6: take rcu lock in rawv6_send_hdrinc()
net: sched: Add policy validation for tc attributes
rtnetlink: fix rtnl_fdb_dump() for ndmsg header
yam: fix a missing-check bug
net: bpfilter: Fix type cast and pointer warnings
net: cxgb3_main: fix a missing-check bug
bpf: 32-bit RSH verification must truncate input before the ALU op
net: phy: phylink: fix SFP interface autodetection
be2net: don't flip hw_features when VXLANs are added/deleted
net/packet: fix packet drop as of virtio gso
net: dsa: b53: Keep CPU port as tagged in all VLANs
openvswitch: load NAT helper
bnxt_en: get the reduced max_irqs by the ones used by RDMA
bnxt_en: free hwrm resources, if driver probe fails.
bnxt_en: Fix enables field in HWRM_QUEUE_COS2BW_CFG request
bnxt_en: Fix VNIC reservations on the PF.
team: Forbid enslaving team device to itself
net/usb: cancel pending work when unbinding smsc75xx
mlxsw: spectrum: Delete RIF when VLAN device is removed
...
* akpm:
mm: madvise(MADV_DODUMP): allow hugetlbfs pages
ocfs2: fix locking for res->tracking and dlm->tracking_list
mm/vmscan.c: fix int overflow in callers of do_shrink_slab()
mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly
mm/vmstat.c: fix outdated vmstat_text
proc: restrict kernel stack dumps to root
mm/hugetlb: add mmap() encodings for 32MB and 512MB page sizes
mm/migrate.c: split only transparent huge pages when allocation fails
ipc/shm.c: use ERR_CAST() for shm_lock() error return
mm/gup_benchmark: fix unsigned comparison to zero in __gup_benchmark_ioctl
mm, thp: fix mlocking THP page with migration enabled
ocfs2: fix crash in ocfs2_duplicate_clusters_by_page()
hugetlb: take PMD sharing into account when flushing tlb/caches
mm: migration: fix migration of huge PMD shared pages
The page migration code employs try_to_unmap() to try and unmap the source
page. This is accomplished by using rmap_walk to find all vmas where the
page is mapped. This search stops when page mapcount is zero. For shared
PMD huge pages, the page map count is always 1 no matter the number of
mappings. Shared mappings are tracked via the reference count of the PMD
page. Therefore, try_to_unmap stops prematurely and does not completely
unmap all mappings of the source page.
This problem can result is data corruption as writes to the original
source page can happen after contents of the page are copied to the target
page. Hence, data is lost.
This problem was originally seen as DB corruption of shared global areas
after a huge page was soft offlined due to ECC memory errors. DB
developers noticed they could reproduce the issue by (hotplug) offlining
memory used to back huge pages. A simple testcase can reproduce the
problem by creating a shared PMD mapping (note that this must be at least
PUD_SIZE in size and PUD_SIZE aligned (1GB on x86)), and using
migrate_pages() to migrate process pages between nodes while continually
writing to the huge pages being migrated.
To fix, have the try_to_unmap_one routine check for huge PMD sharing by
calling huge_pmd_unshare for hugetlbfs huge pages. If it is a shared
mapping it will be 'unshared' which removes the page table entry and drops
the reference on the PMD page. After this, flush caches and TLB.
mmu notifiers are called before locking page tables, but we can not be
sure of PMD sharing until page tables are locked. Therefore, check for
the possibility of PMD sharing before locking so that notifiers can
prepare for the worst possible case.
Link: http://lkml.kernel.org/r/20180823205917.16297-2-mike.kravetz@oracle.com
[mike.kravetz@oracle.com: make _range_in_vma() a static inline]
Link: http://lkml.kernel.org/r/6063f215-a5c8-2f0c-465a-2c515ddc952d@oracle.com
Fixes: 39dde65c99 ("shared page table for hugetlb page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ingo writes:
"scheduler fixes:
These fixes address a rather involved performance regression between
v4.17->v4.19 in the sched/numa auto-balancing code. Since distros
really need this fix we accelerated it to sched/urgent for a faster
upstream merge.
NUMA scheduling and balancing performance is now largely back to
v4.17 levels, without reintroducing the NUMA placement bugs that
v4.18 and v4.19 fixed.
Many thanks to Srikar Dronamraju, Mel Gorman and Jirka Hladky, for
reporting, testing, re-testing and solving this rather complex set of
bugs."
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/numa: Migrate pages to local nodes quicker early in the lifetime of a task
mm, sched/numa: Remove rate-limiting of automatic NUMA balancing migration
sched/numa: Avoid task migration for small NUMA improvement
mm/migrate: Use spin_trylock() while resetting rate limit
sched/numa: Limit the conditions where scan period is reset
sched/numa: Reset scan rate whenever task moves across nodes
sched/numa: Pass destination CPU as a parameter to migrate_task_rq
sched/numa: Stop multiple tasks from moving to the CPU at the same time
The Microsemi Ocelot has multiple SerDes and requires that the SerDes be
muxed accordingly to the hardware representation.
Let's add a constant for each SerDes available in the Microsemi Ocelot.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since HSIO address space can be accessed by different drivers, let's
simplify the register address definitions so that it can be easily used
by all drivers and put the register address definition in the
include/soc/mscc/ocelot_hsio.h header file.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since HSIO address space can be used by different drivers (PLL, SerDes
muxing, temperature sensor), let's move it somewhere it can be included
by all drivers.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid the socket lookup cost in udp_gro_receive if no socket has a
udp tunnel callback configured.
udp_sk(sk)->gro_receive requires a registration with
setup_udp_tunnel_sock, which enables the static key.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Felipe writes:
USB for v4.20
With 63 non-merge commits, this is not a large merge window for USB
peripheral. The largest changes go to the UVC gadget driver which a
few folks have been improving.
Apart from UVC changes, we have a few more devices being added to
Renesas USB3 and DWC3 controller drivers and a couple minor bug fixes
on other drivers.
* tag 'usb-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (63 commits)
USB: net2280: Remove ->disconnect() callback from net2280_pullup()
usb: dwc2: disable power_down on rockchip devices
usb: gadget: udc: renesas_usb3: add support for r8a77990
dt-bindings: usb: renesas_usb3: add bindings for r8a77990
usb: gadget: udc: renesas_usb3: Add r8a774a1 support
usb: gadget: udc: renesas_usb3: Fix b-device mode for "workaround"
usb: dwc2: gadget: Add handler for WkupAlert interrupt
usb: dwc2: gadget: enable WKUP_ALERT interrupt
usb: dwc2: gadget: Program GREFCLK register
usb: dwc2: gadget: Add parameters for GREFCLK register
usb: dwc2: Add definitions for new registers
usb: dwc2: Update target (u)frame calculation
usb: dwc2: Add dwc2_gadget_dec_frame_num_by_one() function
usb: dwc2: Add core parameter for service interval support
usb: dwc2: Update registers definitions to support service interval
usb: renesas_usbhs: add support for R-Car E3
dt-bindings: usb: renesas_usbhs: add bindings for r8a77990
usb: renesas_usbhs: rcar3: Use OTG mode for R-Car D3
Revert "usb: renesas_usbhs: set the mode by using extcon state for non-otg channel"
usb: gadget: f_uac2: disable IN/OUT ep if unused
...
In commit ec3ed293e7 ("net_sched: change tcf_del_walker() to take idrinfo->lock")
we move fl_hw_destroy_tmplt() to a workqueue to avoid blocking
with the spinlock held. Unfortunately, this causes a lot of
troubles here:
1. tcf_chain_destroy() could be called right after we queue the work
but before the work runs. This is a use-after-free.
2. The chain refcnt is already 0, we can't even just hold it again.
We can check refcnt==1 but it is ugly.
3. The chain with refcnt 0 is still visible in its block, which means
it could be still found and used!
4. The block has a refcnt too, we can't hold it without introducing a
proper API either.
We can make it working but the end result is ugly. Instead of wasting
time on reviewing it, let's just convert the troubling spinlock to
a mutex, which allows us to use non-atomic allocations too.
Fixes: ec3ed293e7 ("net_sched: change tcf_del_walker() to take idrinfo->lock")
Reported-by: Ido Schimmel <idosch@idosch.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We already check the RSS indirection table does not use queues which
would be disabled by channel reconfiguration. Make sure user does not
try to disable queues which have a UMEM and zero-copy AF_XDP socket
installed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
These references to the umem will be used to store information
on what kind of AF_XDP umem that is bound to a queue id, if any.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When we use raw socket as the vhost backend, a packet from virito with
gso offloading information, cannot be sent out in later validaton at
xmit path, as we did not set correct skb->protocol which is further used
for looking up the gso function.
To fix this, we set this field according to virito hdr information.
Fixes: e858fae2b0 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion")
Signed-off-by: Jianfeng Tan <jianfeng.tan@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the refcounting and potential free of dst metrics associated
for ipv4 and ipv6 to a common helper.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4 and ipv6 both use refcounted metrics if FIB entries have metrics set.
Move the common initialization code to a helper and use for both protocols.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the refcounting and potential free of dst metrics associated
with a fib entry to a helper and use it in both ipv4 and ipv6.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidate initialization of ipv4 and ipv6 metrics when fib entries
are created into a single helper, ip_fib_metrics_init, that handles
the call to ip_metrics_convert.
If no metrics are defined for the fib entry, then the metrics is set
to dst_default_metrics.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sparse complains thusly:
CHECK arch/x86/crypto/morus640-sse2-glue.c
arch/x86/crypto/morus640-sse2-glue.c:38:1: warning: symbol 'crypto_morus640_sse2_algs' was not declared. Should it be static?
CHECK arch/x86/crypto/morus1280-sse2-glue.c
arch/x86/crypto/morus1280-sse2-glue.c:38:1: warning: symbol 'crypto_morus1280_sse2_algs' was not declared. Should it be static?
CHECK arch/x86/crypto/morus1280-avx2-glue.c
arch/x86/crypto/morus1280-avx2-glue.c:38:1: warning: symbol 'crypto_morus1280_avx2_algs' was not declared. Should it be static?
and sparse is correct - these don't need to be global and polluting the namespace.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
quality field is currently documented as being 'per mill'. In fact the
math involved is:
add_hwgenerator_randomness((void *)rng_fillbuf, rc,
rc * current_quality * 8 >> 10);
thus the actual definition is "bits of entropy per 1024 bits of input".
The current documentation seems to have confused multiple people
in the past, let's fix the documentation to match code.
An alternative is to change core to match driver expectations, replacing
rc * current_quality * 8 >> 10
with
rc * current_quality / 1000
but that has performance costs, so probably isn't a good option.
Fixes: 0f734e6e76 ("hwrng: add per-device entropy derating")
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Dave writes:
"amdgpu and two core fixes
Two fixes for amdgpu:
one corrects a use of process->mm
one fix for display code race condition that can result in a crash
Two core fixes:
One for a use-after-free in the leasing code
One for a cma/fbdev crash."
* tag 'drm-fixes-2018-10-05' of git://anongit.freedesktop.org/drm/drm:
drm/amdkfd: Fix incorrect use of process->mm
drm/amd/display: Signal hw_done() after waiting for flip_done()
drm/cma-helper: Fix crash in fbdev error path
drm: fix use-after-free read in drm_mode_create_lease_ioctl()
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
msix_vec_per_pf_min - This param sets the number of minimal MSIX
vectors required for the device initialization. This value is set
in the device which limits MSIX vectors per PF.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
msix_vec_per_pf_max - This param sets the number of MSIX vectors
that the device requests from the host on driver initialization.
This value is set in the device which is applicable per PF.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ignore_ari - Device ignores ARI(Alternate Routing ID) capability,
even when platforms has the support and creates same number of
partitions when platform does not support ARI capability.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A cgroup which is already a threaded domain may be converted into a
threaded cgroup if the prerequisite conditions are met. When this
happens, all threaded descendant should also have their ->dom_cgrp
updated to the new threaded domain cgroup. Unfortunately, this
propagation was missing leading to the following failure.
# cd /sys/fs/cgroup/unified
# cat cgroup.subtree_control # show that no controllers are enabled
# mkdir -p mycgrp/a/b/c
# echo threaded > mycgrp/a/b/cgroup.type
At this point, the hierarchy looks as follows:
mycgrp [d]
a [dt]
b [t]
c [inv]
Now let's make node "a" threaded (and thus "mycgrp" s made "domain threaded"):
# echo threaded > mycgrp/a/cgroup.type
By this point, we now have a hierarchy that looks as follows:
mycgrp [dt]
a [t]
b [t]
c [inv]
But, when we try to convert the node "c" from "domain invalid" to
"threaded", we get ENOTSUP on the write():
# echo threaded > mycgrp/a/b/c/cgroup.type
sh: echo: write error: Operation not supported
This patch fixes the problem by
* Moving the opencoded ->dom_cgrp save and restoration in
cgroup_enable_threaded() into cgroup_{save|restore}_control() so
that mulitple cgroups can be handled.
* Updating all threaded descendants' ->dom_cgrp to point to the new
dom_cgrp when enabling threaded mode.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Reported-by: Amin Jamali <ajamali@pivotal.io>
Reported-by: Joao De Almeida Pereira <jpereira@pivotal.io>
Link: https://lore.kernel.org/r/CAKgNAkhHYCMn74TCNiMJ=ccLd7DcmXSbvw3CbZ1YREeG7iJM5g@mail.gmail.com
Fixes: 454000adaa ("cgroup: introduce cgroup->dom_cgrp and threaded css_set handling")
Cc: stable@vger.kernel.org # v4.14+
Miklos writes:
"overlayfs fixes for 4.19-rc7
This update fixes a couple of regressions in the stacked file update
added in this cycle, as well as some older bugs uncovered by
syzkaller.
There's also one trivial naming change that touches other parts of
the fs subsystem."
* tag 'ovl-fixes-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix format of setxattr debug
ovl: fix access beyond unterminated strings
ovl: make symbol 'ovl_aops' static
vfs: swap names of {do,vfs}_clone_file_range()
ovl: fix freeze protection bypass in ovl_clone_file_range()
ovl: fix freeze protection bypass in ovl_write_iter()
ovl: fix memory leak on unlink of indexed file
Commit 0413bedabc ("of: Add device_type access helper functions")
added a new helper not yet used in preparation for some treewide clean
up of accesses to 'device_type' properties. Unfortunately, there's an
error and 'type' was used for the property name. Fix this.
Fixes: 0413bedabc ("of: Add device_type access helper functions")
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Prior to commit 190d7f02ce ("HID: input: do not increment usages when
a duplicate is found") from the v4.18 kernel, HID used to shift the
event codes if a duplicate usage was found. This ended up in a situation
where a device would export a ton of ABS_MISC+n event codes, or a ton
of REL_MISC+n event codes.
This is now fixed, however userspace needs to detect those situation.
Fortunately, ABS_MT_SLOT-1 (ABS_MISC+6) was never assigned a code, and
so libinput can detect fake multitouch devices from genuine ones by
checking if ABS_MT_SLOT-1 is set.
Now that we have REL_WHEEL_HI_RES, libinput won't be able to differentiate
true high res mice from some other device in a pre-v4.18 kernel.
Set in stone that the ABS_MISC+6 and REL_MISC+1 are reserved and should not
be used so userspace can properly work around those old kernels.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For discarding the pending bytes on rawmidi, we process with a loop of
snd_rawmidi_transmit() which is just a waste of CPU power.
Implement a lightweight API function to discard the pending bytes and
the proceed the ring buffer instantly, and use it instead of open
codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Saeed Mahameed says:
====================
mlx5-updates-2018-10-03
mlx5 core driver and ethernet netdev updates, please note there is a small
devlink releated update to allow extack argument to eswitch operations.
From Eli Britstein,
1) devlink: Add extack argument to the eswitch related operations
2) net/mlx5e: E-Switch, return extack messages for failures in the e-switch devlink callbacks
3) net/mlx5e: Add extack messages for TC offload failures
From Eran Ben Elisha,
4) mlx5e: Add counter for aRFS rule insertion failures
From Feras Daoud
5) Fast teardown support for mlx5 device
This change introduces the enhanced version of the "Force teardown" that
allows SW to perform teardown in a faster way without the need to reclaim
all the FW pages.
Fast teardown provides the following advantages:
1- Fix a FW race condition that could cause command timeout
2- Avoid moving to polling mode
3- Close the vport to prevent PCI ACK to be sent without been scatter
to memory
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells says:
====================
rxrpc: Development
Here are some development patches for AF_RXRPC. The most significant points
are:
(1) Change the tracepoint that indicates a packet has been transmitted
into one that indicates a packet is about to be transmitted. Without
this, the response tracepoint may occur first if the round trip is
fast enough.
(2) Sort out AFS address list handling to better enforce maximum capacity
to use helper functions to fill them and to do an insertion sort to
order them. This is here to make (3) easier.
(3) Keep AF_INET addresses as AF_INET addresses rather than converting
them to AF_INET6 in both AF_RXRPC and kAFS. I hadn't realised that a
UDP6 socket would just call down into UDP4 if given an AF_INET
address.
(4) Allow the timestamp on the first DATA packet of a reply to be
retrieved by a kernel service. This will give the kAFS a more
accurate base from which to calculate the callback promise expiration.
(5) Allow the rxrpc protocol epoch value to be retrieved from an incoming
call. This will allow kAFS to determine if the fileserver restarted
and if two addresses apparently assigned to the same fileserver
actually are different boxes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the DNS resolver to retrieve a set of servers and their associated
addresses, ports, preference and weight ratings.
In terms of communication with userspace, "srv=1" is added to the callout
string (the '1' indicating the maximum data version supported by the
kernel) to ask the userspace side for this.
If the userspace side doesn't recognise it, it will ignore the option and
return the usual text address list.
If the userspace side does recognise it, it will return some binary data
that begins with a zero byte that would cause the string parsers to give an
error. The second byte contains the version of the data in the blob (this
may be between 1 and the version specified in the callout data). The
remainder of the payload is version-specific.
In version 1, the payload looks like (note that this is packed):
u8 Non-string marker (ie. 0)
u8 Content (0 => Server list)
u8 Version (ie. 1)
u8 Source (eg. DNS_RECORD_FROM_DNS_SRV)
u8 Status (eg. DNS_LOOKUP_GOOD)
u8 Number of servers
foreach-server {
u16 Name length (LE)
u16 Priority (as per SRV record) (LE)
u16 Weight (as per SRV record) (LE)
u16 Port (LE)
u8 Source (eg. DNS_RECORD_FROM_NSS)
u8 Status (eg. DNS_LOOKUP_GOT_NOT_FOUND)
u8 Protocol (eg. DNS_SERVER_PROTOCOL_UDP)
u8 Number of addresses
char[] Name (not NUL-terminated)
foreach-address {
u8 Family (AF_INET{,6})
union {
u8[4] ipv4_addr
u8[16] ipv6_addr
}
}
}
This can then be used to fetch a whole cell's VL-server configuration for
AFS, for example.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KVM: s390: Features for 4.20
- Initial version of AP crypto virtualization via vfio-mdev
- Set the host program identifier
- Optimize page table locking
As described in:
77b0bf55bc: ("kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs")
GCC's inlining heuristics are broken with common asm() patterns used in
kernel code, resulting in the effective disabling of inlining.
The workaround is to set an assembly macro and call it from the inline
assembly block. As a result GCC considers the inline assembly block as
a single instruction. (Which it isn't, but that's the best we can get.)
This patch increases the kernel size:
text data bss dec hex filename
18146889 10225380 2957312 31329581 1de0d2d ./vmlinux before
18147336 10226688 2957312 31331336 1de1408 ./vmlinux after (+1755)
But enables more aggressive inlining (and probably better branch decisions).
The number of static text symbols in vmlinux is much lower:
Before: 40218
After: 40053 (-165)
The assembly code gets harder to read due to the extra macro layer.
[ mingo: Rewrote the changelog. ]
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181003213100.189959-7-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As described in:
77b0bf55bc: ("kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs")
GCC's inlining heuristics are broken with common asm() patterns used in
kernel code, resulting in the effective disabling of inlining.
In the case of objtool the resulting borkage can be significant, since all the
annotations of objtool are discarded during linkage and never inlined,
yet GCC bogusly considers most functions affected by objtool annotations
as 'too large'.
The workaround is to set an assembly macro and call it from the inline
assembly block. As a result GCC considers the inline assembly block as
a single instruction. (Which it isn't, but that's the best we can get.)
This increases the kernel size slightly:
text data bss dec hex filename
18140829 10224724 2957312 31322865 1ddf2f1 ./vmlinux before
18140970 10225412 2957312 31323694 1ddf62e ./vmlinux after (+829)
The number of static text symbols (i.e. non-inlined functions) is reduced:
Before: 40321
After: 40302 (-19)
[ mingo: Rewrote the changelog. ]
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Christopher Li <sparse@chrisli.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-sparse@vger.kernel.org
Link: http://lkml.kernel.org/r/20181003213100.189959-4-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allow the epoch value to be queried on a server connection. This is in the
rxrpc header of every packet for use in routing and is derived from the
client's state. It's also not supposed to change unless the client gets
restarted.
AFS can make use of this information to deduce whether a fileserver has
been restarted because the fileserver makes client calls to the filesystem
driver's cache manager to send notifications (ie. callback breaks) about
conflicting changes from other clients. These convey the fileserver's own
epoch value back to the filesystem.
Signed-off-by: David Howells <dhowells@redhat.com>
