When executing the last MPTCP selftests on older kernels, this output is
printed:
# 001 no JOIN
# join Rx [SKIP]
# join Tx [SKIP]
# fallback [SKIP]
In fact, behind each line, a few counters are checked, and likely not
all of them have been skipped because the they are not available on
these kernels. Instead, "new" and unsupported counters for these groups
are now ignored, and [ OK ] will be printed instead of [SKIP].
Note that on the MPTCP CI, when validating the dev versions, any
unsupported counter will cause the tests to fail. So this is safe not to
print 'SKIP' for these group checks.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-15-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of waiting for a random amount of time (1 second), wait for an
event to be received on the other side.
To do that, when an address is announced (userspace_pm_add_addr), the
ANNOUNCED is expected. When a new subflow is created
(userspace_pm_add_sf), the SUB_ESTABLISHED event is expected.
With this, the tests can finish quicker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-11-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It looks like most of the time, this helper was simply waiting a bit
more than one second: the previous MPJoin counter was often already at
the expected value. So at the end, it was just checking 10 times for
the MPJoin counter to change, but it was not happening. For the tests,
that was time, it was just waiting longer for nothing.
Instead, use 'wait_mpj' with the expected counter: in the tests, the MPJ
counter can easily be predicted. While at it, stop passing the netns as
argument: here the received MPJoin ACK is checked, which happens on the
server side. If later on, this needs to be checked on the client side,
the helper can be adapted for this case, but better avoid confusions now
if it is not needed.
While at it, stop using 'i' for the variable if it is not used.
With this, the tests can finish quicker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-10-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'wait_mpj' was used just after having created a background connection,
but before creating new subflows. So no MPJ were sent. The intention was
to wait for the connection to be established, which was the same as
doing a simple sleep with a "random" value.
Instead, wait for an "established" event. With this, the tests can
finish quicker.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260203-net-next-mptcp-misc-feat-6-20-v1-9-31ec8bfc56d1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull KVM fixes from Paolo Bonzini:
- Fix a bug where AVIC is incorrectly inhibited when running with
x2AVIC disabled via module param (or on a system without x2AVIC)
- Fix a dangling device posted IRQs bug by explicitly checking if the
irqfd is still active (on the list) when handling an eventfd signal,
instead of zeroing the irqfd's routing information when the irqfd is
deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not
disable posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks
for an MSI), incorrectly leaving the IRQ in posted mode (and leading
to use-after-free and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next
for a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends,
which leads to unexpected page faults in guest code due e.g.
__memset_chk@plt not being resolved.
- Explicitly configure the supported XSS capabilities from within
{svm,vmx}_set_cpu_caps() to fix a bug where VMX will compute the
reference VMCS configuration with SHSTK and IBT enabled, but then
compute each CPUs local config with SHSTK and IBT disabled if not all
CET xfeatures are enabled, e.g. if the kernel is built with
X86_KERNEL_IBT=n.
The mismatch in features results in differing nVMX setting, and
ultimately causes kvm-intel.ko to refuse to load with nested=1.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly configure supported XSS from {svm,vmx}_set_cpu_caps()
KVM: selftests: Add -U_FORTIFY_SOURCE to avoid some unpredictable test failures
KVM: x86: Assert that non-MSI doesn't have bypass vCPU when deleting producer
KVM: Don't clobber irqfd routing type when deassigning irqfd
KVM: SVM: Check vCPU ID against max x2AVIC ID if and only if x2AVIC is enabled
Final KVM fixes for 6.19:
- Fix a bug where AVIC is incorrectly inhibited when running with x2AVIC
disabled via module param (or on a system without x2AVIC).
- Fix a dangling device posted IRQs bug by explicitly checking if the irqfd is
still active (on the list) when handling an eventfd signal, instead of
zeroing the irqfd's routing information when the irqfd is deassigned.
Zeroing the irqfd's routing info causes arm64 and x86's to not disable
posting for the IRQ (kvm_arch_irq_bypass_del_producer() looks for an MSI),
incorrectly leaving the IRQ in posted mode (and leading to use-after-free
and memory leaks on AMD in particular).
This is both the most pressing and scariest, but it's been in -next for
a while.
- Disable FORTIFY_SOURCE for KVM selftests to prevent the compiler from
generating calls to the checked versions of memset() and friends, which
leads to unexpected page faults in guest code due e.g. __memset_chk@plt
not being resolved.
- Explicitly configure the support XSS from within {svm,vmx}_set_cpu_caps() to
fix a bug where VMX will compute the reference VMCS configuration with SHSTK
and IBT enabled, but then compute each CPUs local config with SHSTK and IBT
disabled if not all CET xfeatures are enabled, e.g. if the kernel is built
with X86_KERNEL_IBT=n. The mismatch in features results in differing nVMX
setting, and ultimately causes kvm-intel.ko to refuse to load with nested=1.
We had a few patches in this area and no explicit coverage so far.
The test case covers the scenario addressed by the previous fix;
reusing the existing udpgro_fwd.sh script to leverage part of the
of the virtual network setup, even if such script is possibly not
a perfect fit.
Note that the mentioned script already contains several shellcheck
violation; this patch does not fix the existing code, just avoids
adding more issues in the new one.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/768ca132af81e83856e34d3105b86c37e566a7ad.1770032084.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, GRO does not flush packets when the CWR bit is set.
A corresponding self-test is being added, in which the CWR flag
is set for two consecutive packets, but the first packet with the
CWR flag set will not be flushed immediately.
+===================+==========+===============+===========+
| Packet id | CWR flag | Payload | Flushing? |
+===================+==========+===============+===========+
| 0 | 0 | PAYLOAD_LEN | 0 |
| ... | 0 | PAYLOAD_LEN | 1 |
+-------------------+----------+---------------+-----------+
| NUM_PACKETS/2 - 1 | 1 | payload_len | 0 |
| NUM_PACKETS/2 | 1 | payload_len | 1 |
+-------------------+----------+---------------+-----------+
| ... | 0 | PAYLOAD_LEN | 0 |
| NUM_PACKETS | 0 | PAYLOAD_LEN | 1 |
+===================+==========+===============+===========+
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-4-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test which checks that the RSS table is at least 4x the max
queue count supported by the device. The original RSS spec from
Microsoft stated that the RSS indirection table should be 2 to 8
times the CPU count, presumably assuming queue per CPU. If the
CPU count is not a power of two, however, a power-of-2 table
2x larger than queue count results in a 33% traffic imbalance.
Validate that the indirection table is at least 4x the queue
count. This lowers the imbalance to 16% which empirically
appears to be more acceptable to memcache-like workloads.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260131225454.1225151-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch moves netconsole selftests from drivers/net to its own target
in drivers/net/netconsole.
This change helps saving some resources from CI since tests in
drivers/net automatically run against real hardware which are not used
by netconsole tests as they rely solely on netdevsim.
lib_netcons.sh is kept under drivers/net/lib since it is also used by
bonding selftests. Finally, drivers/net config remains unchanged as
netpoll_basic.py requires netconsole (and does leverage real HW testing).
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Link: https://patch.msgid.link/20260127-netcons-selftest-target-v2-1-f509ab65b3bc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, CAN and wireless.
There are no known regressions currently under investigation.
Current release - fix to a fix:
- can: gs_usb_receive_bulk_callback(): fix error message
Current release - regressions:
- eth: gve: fix probe failure if clock read fails
Previous releases - regressions:
- ipv6: use the right ifindex when replying to icmpv6 from localhost
- mptcp: fix race in mptcp_pm_nl_flush_addrs_doit()
- bluetooth: fix null-ptr-deref in hci_uart_write_work
- eth:
- sfc: fix deadlock in RSS config read
- ice: ifix NULL pointer dereference in ice_vsi_set_napi_queues
- mlx5: fix memory leak in esw_acl_ingress_lgcy_setup()
Previous releases - always broken:
- core: fix segmentation of forwarding fraglist GRO
- wifi: mac80211: correctly decode TTLM with default link map
- mptcp: avoid dup SUB_CLOSED events after disconnect
- nfc: fix memleak in nfc_llcp_send_ui_frame().
- eth:
- bonding: fix use-after-free due to enslave fail
- mlx5e:
- TC, delete flows only for existing peers
- fix inverted cap check in tx flow table root disconnect"
* tag 'net-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
net: fix segmentation of forwarding fraglist GRO
wifi: mac80211: correctly decode TTLM with default link map
selftests: mptcp: join: fix local endp not being tracked
selftests: mptcp: check subflow errors in close events
mptcp: only reset subflow errors when propagated
selftests: mptcp: check no dup close events after error
mptcp: avoid dup SUB_CLOSED events after disconnect
net/mlx5e: Skip ESN replay window setup for IPsec crypto offload
net/mlx5: Fix vhca_id access call trace use before alloc
net/mlx5: fs, Fix inverted cap check in tx flow table root disconnect
net: phy: micrel: fix clk warning when removing the driver
net/mlx5e: don't assume psp tx skbs are ipv6 csum handling
net: bridge: fix static key check
nfc: nci: Fix race between rfkill and nci_unregister_device().
gve: fix probe failure if clock read fails
net/mlx5e: Account for netdev stats in ndo_get_stats64
net/mlx5e: TC, delete flows only for existing peers
net/mlx5: Fix Unbinding uplink-netdev in switchdev mode
ice: stop counting UDP csum mismatch as rx_errors
ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues
...
Similar to IPIP, introduce specific selftest for IP6IP6 flowtable SW
acceleration in nft_flowtable.sh
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
When running this mptcp_join.sh selftest on older kernel versions not
supporting local endpoints tracking, this test fails because 3 MP_JOIN
ACKs have been received, while only 2 were expected.
It is not clear why only 2 MP_JOIN ACKs were expected on old kernel
versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on
the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is
expected in the selftests included in this kernel version, see commit
f4480eaad489 ("selftests: mptcp: add missing join check").
Switch the expected MP_JOIN ACKs to 3. While at it, move this
chk_join_nr helper out of the special condition for older kernel
versions as it is now the same as with more recent ones. Also, invert
the condition to be more logical: what's expected on newer kernel
versions having such helper first.
Fixes: d4c81bbb86 ("selftests: mptcp: join: support local endpoint being tracked or not")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: subflow closed events should contain
an error field when a subflow got closed with an error, e.g. reset or
timeout.
For this test, the chk_evt_nr helper has been extended to check
attributes in the matched events.
In this test, the 2 subflow closed events should have an error.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-4-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: subflow closed events are re-sent
with less info when the initial subflow is disconnected after an error
and each time a subflow is closed after that.
In this new test, the userspace PM is involved because that's how it was
discovered, but it is not specific to it. The initial subflow is
terminated with a RESET, and that will cause the subflow disconnect.
Then, a new subflow is initiated, but also got rejected, which cause a
second subflow closed event, but not a third one.
While at it, in case of failure to get the expected amount of events,
the events are printed.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d82809b6c5 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-2-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a bug in assoc_sk_only_mismatch() and
assoc_sk_only_mismatch_tx() that creates a race condition which
triggers test flakes in later test cases e.g. data_send_bad_key().
The problem is that the client uses the "conn clr" rpc to setup a data
connection with psp_responder, but never uses a matching "data close"
rpc. This creates a race condition where if the client can queue
another data sock request, like in data_send_bad_key(), before the
server can accept the old connection from the backlog we end up in a
situation where we have two connections in the backlog: one for the
closed connection we have received a FIN for, and one for the new PSP
connection which is expecting to do key exchange.
From there the server pops the closed connection from the backlog, but
the data_send_bad_key() test case in psp.py hangs waiting to perform
key exchange.
The fix is to properly use _conn_close, which fill force the server to
remove the closed connection from the backlog before sending the RPC
ack to the client.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260127-psp-flaky-test-v1-1-13403e390af3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test tcp_tx_timestamp() behavior after ("tcp: tcp_tx_timestamp()
must look at the rtx queue").
Without the fix, this new test fails like this:
tcp_timestamping_tcp_tx_timestamp_bug.pkt:55: runtime error in recvmsg call: Expected result 0 but got -1 with errno 11 (Resource temporarily unavailable)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260127123828.4098577-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kselftest framework defines KSFT_SKIP=4 as the standard exit code
for skipped tests. However, phc.sh currently uses a mix of 'exit 0' and
'exit 1' to indicate skip conditions, which can confuse test harnesses
and CI systems.
This patch introduces ksft_skip=4 variable and unifies all skip exit
paths to use 'exit $ksft_skip', consistent with other selftests like
net/lib.sh and net/fib_nexthops.sh.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260126061532.12532-1-junjie.cao@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests that validate vsock sockets are resilient to deleting
namespaces. The vsock sockets should still function normally.
The function check_ns_delete_doesnt_break_connection() is added to
re-use the step-by-step logic of 1) setup connections, 2) delete ns,
3) check that the connections are still ok.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-12-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests to validate namespace correctness using vsock_test and socat.
The vsock_test tool is used to validate expected success tests, but
socat is used for expected failure tests. socat is used to ensure that
connections are rejected outright instead of failing due to some other
socket behavior (as tested in vsock_test). Additionally, socat is
already required for tunneling TCP traffic from vsock_test. Using only
one of the vsock_test tests like 'test_stream_client_close_client' would
have yielded a similar result, but doing so wouldn't remove the socat
dependency.
Additionally, check for the dependency socat. socat needs special
handling beyond just checking if it is on the path because it must be
compiled with support for both vsock and unix. The function
check_socat() checks that this support exists.
Add more padding to test name printf strings because the tests added in
this patch would otherwise overflow.
Add vm_dmesg_* helpers to encapsulate checking dmesg
for oops and warnings.
Add ability to pass extra args to host-side vsock_test so that tests
that cause false positives may be skipped with arg --skip.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-11-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests to verify CID collision rules across different vsock namespace
modes.
1. Two VMs with the same CID cannot start in different global namespaces
(ns_global_same_cid_fails)
2. Two VMs with the same CID can start in different local namespaces
(ns_local_same_cid_ok)
3. VMs with the same CID can coexist when one is in a global namespace
and another is in a local namespace (ns_global_local_same_cid_ok and
ns_local_global_same_cid_ok)
The tests ns_global_local_same_cid_ok and ns_local_global_same_cid_ok
make sure that ordering does not matter.
The tests use a shared helper function namespaces_can_boot_same_cid()
that attempts to start two VMs with identical CIDs in the specified
namespaces and verifies whether VM initialization failed or succeeded.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-10-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests for the /proc/sys/net/vsock/{ns_mode,child_ns_mode}
interfaces. Namely, that they accept/report "global" and "local" strings
and enforce their access policies.
Start a convention of commenting the test name over the test
description. Add test name comments over test descriptions that existed
before this convention.
Add a check_netns() function that checks if the test requires namespaces
and if the current kernel supports namespaces. Skip tests that require
namespaces if the system does not have namespace support.
This patch is the first to add tests that do *not* re-use the same
shared VM. For that reason, it adds a run_ns_tests() function to run
these tests and filter out the shared VM tests.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-9-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace /proc/net parsing with ss(8) for detecting listening sockets in
wait_for_listener() functions and add support for TCP, VSOCK, and Unix
socket protocols.
The previous implementation parsed /proc/net/tcp using awk to detect
listening sockets, but this approach could not support vsock because
vsock does not export socket information to /proc/net/.
Instead, use ss so that we can detect listeners on tcp, vsock, and unix.
The protocol parameter is now required for all wait_for_listener family
functions (wait_for_listener, vm_wait_for_listener,
host_wait_for_listener) to explicitly specify which socket type to wait
for.
ss is added to the dependency check in check_deps().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-8-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add namespace support to vm management, ssh helpers, and vsock_test
wrapper functions. This enables running VMs and test helpers in specific
namespaces, which is required for upcoming namespace isolation tests.
The functions still work correctly within the init ns, though the caller
must now pass "init_ns" explicitly.
No functional changes for existing tests. All have been updated to pass
"init_ns" explicitly.
Affected functions (such as vm_start() and vm_ssh()) now wrap their
commands with 'ip netns exec' when executing commands in non-init
namespaces.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-6-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add functions for initializing namespaces with the different vsock NS
modes. Callers can use add_namespaces() and del_namespaces() to create
namespaces global0, global1, local0, and local1.
The add_namespaces() function initializes global0, local0, etc... with
their respective vsock NS mode by toggling child_ns_mode before creating
the namespace.
Remove namespaces upon exiting the program in cleanup(). This is
unlikely to be needed for a healthy run, but it is useful for tests that
are manually killed mid-test.
This patch is in preparation for later namespace tests.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-5-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The __exit__ method receives ex_type as the exception class when an
exception occurs. The previous code used implicit boolean evaluation:
terminate = self.terminate or (self._exit_wait and ex_type)
^^^^^^^^^^^
In Python, the and operator can be used with non-boolean values, but it
does not always return a boolean result.
This is probably not what we want, because 'self._exit_wait and ex_type'
could return the actual ex_type value (the exception class) rather than
a boolean True when an exception occurs.
Use explicit `ex_type is not None` check to properly evaluate whether
an exception occurred, returning a boolean result.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260125105524.773993-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull s390 fixes from Heiko Carstens:
- Add $(DISABLE_KSTACK_ERASE) to vdso compile flags to fix compile
errors with old gcc versions
- Fix path to s390 chacha implementation in vdso selftests, after
vdso64 has been renamed to vdso
- Fix off-by-one bug in APQN limit calculation
- Discard .modinfo section from decompressor image to fix SecureBoot
* tag 's390-6.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot/vmlinux.lds.S: Ensure bzImage ends with SecureBoot trailer
s390/ap: Fix wrong APQN fill calculation
selftests: vDSO: getrandom: Fix path to s390 chacha implementation
s390/vdso: Disable kstack erase
Pull block fixes from Jens Axboe:
- A set of selftest fixes for ublk
- Fix for a pid mismatch in ublk, comparing PIDs in different
namespaces if run inside a namespace
- Fix for a regression added in this release with polling, where the
nvme tcp connect code would spin forever
- Zoned device error path fix
- Tweak the blkzoned uapi additions from this kernel release, making
them more easily discoverable
- Fix for a regression in bcache with bio endio handling added in this
release
* tag 'block-6.19-20260122' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
bcache: use bio cloning for detached device requests
blk-mq: use BLK_POLL_ONESHOT for synchronous poll completion
selftests/ublk: fix garbage output in foreground mode
selftests/ublk: fix error handling for starting device
selftests/ublk: fix IO thread idle check
block: make the new blkzoned UAPI constants discoverable
ublk: fix ublksrv pid handling for pid namespaces
block: Fix an error path in disk_update_zone_resources()
In preparation for testing GSO over UDP tunnels, enhance the test
infrastructure to support a more complex data path involving a TUN
device and a GENEVE udp tunnel.
This patch introduces a dedicated setup/teardown topology that creates
both a GENEVE tunnel interface and a TUN interface. The TUN device acts
as the VTEP (Virtual Tunnel Endpoint), allowing it to send and receive
virtio-net packets. This setup effectively tests the kernel's data path
for encapsulated traffic.
Note that after adding a new address to the UDP tunnel, we need to wait
a bit until the associated route is available.
Additionally, a new data structure is defined to manage test parameters.
This structure is designed to be extensible, allowing different test
data and configurations to be easily added in subsequent patches.
Signed-off-by: Xu Du <xudu@redhat.com>
Link: https://patch.msgid.link/b5787b8c269f43ce11e1756f1691cc7fd9a1e901.1768979440.git.xudu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce rtnetlink manipulation and packet construction helpers that
will simplify the later creation of more related test cases. This avoids
duplicating logic across different test cases.
This new header will contain:
- YNL-based netlink management utilities.
- Helpers for ip link, ip address, ip neighbor and ip route operations.
- Packet construction and manipulation helpers.
Signed-off-by: Xu Du <xudu@redhat.com>
Link: https://patch.msgid.link/91f905715c69c75f7bf72d43388921fde6c34989.1768979440.git.xudu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
