mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-04-07 20:56:27 -04:00
fc2915bb8bfcfdc6e5ea2cfc8d13fbaefe77c2c8
17690 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Eduard Zingerman
|
fc2915bb8b |
selftests/bpf: More precise cpu_mitigations state detection
test_progs and test_verifier binaries execute unpriv tests under the
following conditions:
- unpriv BPF is enabled;
- CPU mitigations are enabled (see [1] for details).
The detection of the "mitigations enabled" state is performed by
unpriv_helpers.c:get_mitigations_off() via inspecting kernel boot
command line, looking for a parameter "mitigations=off".
Such detection scheme won't work for certain configurations,
e.g. when CONFIG_CPU_MITIGATIONS is disabled and boot parameter is
not supplied.
Miss-detection leads to test_progs executing tests meant to be run
only with mitigations enabled, e.g.
verifier_and.c:known_subreg_with_unknown_reg(), and reporting false
failures.
Internally, verifier sets bpf_verifier_env->bypass_spec_{v1,v4}
basing on the value returned by kernel/cpu.c:cpu_mitigations_off().
This function is backed by a variable kernel/cpu.c:cpu_mitigations.
This state is not fully introspect-able via sysfs. The closest proxy
is /sys/devices/system/cpu/vulnerabilities/spectre_v1, but it reports
"vulnerable" state only if mitigations are disabled *and* current cpu
is vulnerable, while verifier does not check cpu state.
There are only two ways the kernel/cpu.c:cpu_mitigations can be set:
- via boot parameter;
- via CONFIG_CPU_MITIGATIONS option.
This commit updates unpriv_helpers.c:get_mitigations_off() to scan
/boot/config-$(uname -r) and /proc/config.gz for
CONFIG_CPU_MITIGATIONS value in addition to boot command line check.
Tested using the following configurations:
- mitigations enabled (unpriv tests are enabled)
- mitigations disabled via boot cmdline (unpriv tests skipped)
- mitigations disabled via CONFIG_CPU_MITIGATIONS
(unpriv tests skipped)
[1] https://lore.kernel.org/bpf/20231025031144.5508-1-laoar.shao@gmail.com/
Reported-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250617005710.1066165-2-eddyz87@gmail.com
|
||
|
Yonghong Song
|
a633dab4b4 |
selftests/bpf: Fix RELEASE build failure with gcc14
With gcc14, when building with RELEASE=1, I hit four below compilation
failure:
Error 1:
In file included from test_loader.c:6:
test_loader.c: In function ‘run_subtest’: test_progs.h:194:17:
error: ‘retval’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
194 | fprintf(stdout, ##format); \
| ^~~~~~~
test_loader.c:958:13: note: ‘retval’ was declared here
958 | int retval, err, i;
| ^~~~~~
The uninitialized var 'retval' actually could cause incorrect result.
Error 2:
In function ‘test_fd_array_cnt’:
prog_tests/fd_array.c:71:14: error: ‘btf_id’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
71 | fd = bpf_btf_get_fd_by_id(id);
| ^~~~~~~~~~~~~~~~~~~~~~~~
prog_tests/fd_array.c:302:15: note: ‘btf_id’ was declared here
302 | __u32 btf_id;
| ^~~~~~
Changing ASSERT_GE to ASSERT_EQ can fix the compilation error. Otherwise,
there is no functionality change.
Error 3:
prog_tests/tailcalls.c: In function ‘test_tailcall_hierarchy_count’:
prog_tests/tailcalls.c:1402:23: error: ‘fentry_data_fd’ may be used uninitialized
in this function [-Werror=maybe-uninitialized]
1402 | err = bpf_map_lookup_elem(fentry_data_fd, &i, &val);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The code is correct. The change intends to silence gcc errors.
Error 4: (this error only happens on arm64)
In file included from prog_tests/log_buf.c:4:
prog_tests/log_buf.c: In function ‘bpf_prog_load_log_buf’:
./test_progs.h:390:22: error: ‘log_buf’ may be used uninitialized [-Werror=maybe-uninitialized]
390 | int ___err = libbpf_get_error(___res); \
| ^~~~~~~~~~~~~~~~~~~~~~~~
prog_tests/log_buf.c:158:14: note: in expansion of macro ‘ASSERT_OK_PTR’
158 | if (!ASSERT_OK_PTR(log_buf, "log_buf_alloc"))
| ^~~~~~~~~~~~~
In file included from selftests/bpf/tools/include/bpf/bpf.h:32,
from ./test_progs.h:36:
selftests/bpf/tools/include/bpf/libbpf_legacy.h:113:17:
note: by argument 1 of type ‘const void *’ to ‘libbpf_get_error’ declared here
113 | LIBBPF_API long libbpf_get_error(const void *ptr);
| ^~~~~~~~~~~~~~~~
Adding a pragma to disable maybe-uninitialized fixed the issue.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250617044956.2686668-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Eduard Zingerman
|
4a4b84ba9e |
selftests/bpf: verify jset handling in CFG computation
A test case to check if both branches of jset are explored when computing program CFG. At 'if r1 & 0x7 ...': - register 'r2' is computed alive only if jump branch of jset instruction is followed; - register 'r0' is computed alive only if fallthrough branch of jset instruction is followed. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20250613175331.3238739-2-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
67cdcc405b |
veristat: Memory accounting for bpf programs
This commit adds a new field mem_peak / "Peak memory (MiB)" field to a
set of gathered statistics. The field is intended as an estimate for
peak verifier memory consumption for processing of a given program.
Mechanically stat is collected as follows:
- At the beginning of handle_verif_mode() a new cgroup is created
and veristat process is moved into this cgroup.
- At each program load:
- bpf_object__load() is split into bpf_object__prepare() and
bpf_object__load() to avoid accounting for memory allocated for
maps;
- before bpf_object__load():
- a write to "memory.peak" file of the new cgroup is used to reset
cgroup statistics;
- updated value is read from "memory.peak" file and stashed;
- after bpf_object__load() "memory.peak" is read again and
difference between new and stashed values is used as a metric.
If any of the above steps fails veristat proceeds w/o collecting
mem_peak information for a program, reporting mem_peak as -1.
While memcg provides data in bytes (converted from pages), veristat
converts it to megabytes to avoid jitter when comparing results of
different executions.
The change has no measurable impact on veristat running time.
A correlation between "Peak states" and "Peak memory" fields provides
a sanity check for gathered statistics, e.g. a sample of data for
sched_ext programs:
Program Peak states Peak memory (MiB)
------------------------ ----------- -----------------
lavd_select_cpu 2153 44
lavd_enqueue 1982 41
lavd_dispatch 3480 28
layered_dispatch 1417 17
layered_enqueue 760 11
lavd_cpu_offline 349 6
lavd_cpu_online 349 6
lavd_init 394 6
rusty_init 350 5
layered_select_cpu 391 4
...
rusty_stopping 134 1
arena_topology_node_init 170 0
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250613072147.3938139-3-eddyz87@gmail.com
|
||
|
Song Liu
|
ccefa19335 |
bpf/veristat: Fix veristat for map type BPF_MAP_TYPE_CGRP_STORAGE
BPF_MAP_TYPE_CGRP_STORAGE doesn't allow non-zero max_entries. So veristat should not set it to 1. Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250613050001.1058733-1-song@kernel.org |
||
|
Yonghong Song
|
44df9e0d4e |
selftests/bpf: Fix xdp_do_redirect failure with 64KB page size
On arm64 with 64KB page size, the selftest xdp_do_redirect failed like below: ... test_xdp_do_redirect:PASS:pkt_count_tc 0 nsec test_max_pkt_size:PASS:prog_run_max_size 0 nsec test_max_pkt_size:FAIL:prog_run_too_big unexpected prog_run_too_big: actual -28 != expected -22 With 64KB page size, the xdp frame size will be much bigger so the existing test will fail. Adjust various parameters so the test can also work on 64K page size. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250612035042.2208630-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Yonghong Song
|
96fcf7e7a7 |
selftests/bpf: Fix two net related test failures with 64K page size
When running BPF selftests on arm64 with a 64K page size, I encountered
the following two test failures:
sockmap_basic/sockmap skb_verdict change tail:FAIL
tc_change_tail:FAIL
With further debugging, I identified the root cause in the following
kernel code within __bpf_skb_change_tail():
u32 max_len = BPF_SKB_MAX_LEN;
u32 min_len = __bpf_skb_min_len(skb);
int ret;
if (unlikely(flags || new_len > max_len || new_len < min_len))
return -EINVAL;
With a 4K page size, new_len = 65535 and max_len = 16064, the function
returns -EINVAL. However, With a 64K page size, max_len increases to
261824, allowing execution to proceed further in the function. This is
because BPF_SKB_MAX_LEN scales with the page size and larger page sizes
result in higher max_len values.
Updating the new_len parameter in both tests based on actual kernel
page size resolved both failures.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250612035037.2207911-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Yonghong Song
|
4fc012daf9 |
bpf: Fix an issue in bpf_prog_test_run_xdp when page size greater than 4K
The bpf selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow failed on arm64 with 64KB page: xdp_adjust_tail/xdp_adjust_frags_tail_grow:FAIL In bpf_prog_test_run_xdp(), the xdp->frame_sz is set to 4K, but later on when constructing frags, with 64K page size, the frag data_len could be more than 4K. This will cause problems in bpf_xdp_frags_increase_tail(). To fix the failure, the xdp->frame_sz is set to be PAGE_SIZE so kernel can test different page size properly. With the kernel change, the user space and bpf prog needs adjustment. Currently, the MAX_SKB_FRAGS default value is 17, so for 4K page, the maximum packet size will be less than 68K. To test 64K page, a bigger maximum packet size than 68K is desired. So two different functions are implemented for subtest xdp_adjust_frags_tail_grow. Depending on different page size, different data input/output sizes are used to adapt with different page size. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250612035032.2207498-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Fushuai Wang
|
6a4bd31f68 |
selftests/bpf: fix signedness bug in redir_partial()
When xsend() returns -1 (error), the check 'n < sizeof(buf)' incorrectly
treats it as success due to unsigned promotion. Explicitly check for -1
first.
Fixes:
|
||
|
Eduard Zingerman
|
5159482fdb |
selftests/bpf: tests with a loop state missing read/precision mark
The test case absent_mark_in_the_middle_state is equivalent of the
following C program:
1: r8 = bpf_get_prandom_u32();
2: r6 = -32;
3: bpf_iter_num_new(&fp[-8], 0, 10);
4: if (unlikely(bpf_get_prandom_u32()))
5: r6 = -31;
6: for (;;) {
7: if (!bpf_iter_num_next(&fp[-8]))
8: break;
9: if (unlikely(bpf_get_prandom_u32()))
10: *(u64 *)(fp + r6) = 7;
11: }
12: bpf_iter_num_destroy(&fp[-8]);
13: return 0;
W/o a fix that instructs verifier to ignore branches count for loop
entries verification proceeds as follows:
- 1-4, state is {r6=-32,fp-8=active};
- 6, checkpoint A is created with {r6=-32,fp-8=active};
- 7, checkpoint B is created with {r6=-32,fp-8=active},
push state {r6=-32,fp-8=active} from 7 to 9;
- 8,12,13, {r6=-32,fp-8=drained}, exit;
- pop state with {r6=-32,fp-8=active} from 7 to 9;
- 9, push state {r6=-32,fp-8=active} from 9 to 10;
- 6, checkpoint C is created with {r6=-32,fp-8=active};
- 7, checkpoint A is hit, no precision propagated for r6 to C;
- pop state {r6=-32,fp-8=active} from 9 to 10;
- 10, state is {r6=-31,fp-8=active}, r6 is marked as read and precise,
these marks are propagated to checkpoints A and B (but not C, as
it is not the parent of current state;
- 6, {r6=-31,fp-8=active} checkpoint C is hit, because r6 is not
marked precise for this checkpoint;
- the program is accepted, despite a possibility of unaligned u64
stack access at offset -31.
The test case absent_mark_in_the_middle_state2 is similar except the
following change:
r8 = bpf_get_prandom_u32();
r6 = -32;
bpf_iter_num_new(&fp[-8], 0, 10);
if (unlikely(bpf_get_prandom_u32())) {
r6 = -31;
+ jump_into_loop:
+ goto +0;
+ goto loop;
+ }
+ if (unlikely(bpf_get_prandom_u32()))
+ goto jump_into_loop;
+ loop:
for (;;) {
if (!bpf_iter_num_next(&fp[-8]))
break;
if (unlikely(bpf_get_prandom_u32()))
*(u64 *)(fp + r6) = 7;
}
bpf_iter_num_destroy(&fp[-8])
return 0
The goal is to check that read/precision marks are propagated to
checkpoint created at 'goto +0' that resides outside of the loop.
The test case absent_mark_in_the_middle_state3 is a bit different and
is equivalent to the C program below:
int absent_mark_in_the_middle_state3(void)
{
bpf_iter_num_new(&fp[-8], 0, 10)
loop1(-32, &fp[-8])
loop1_wrapper(&fp[-8])
bpf_iter_num_destroy(&fp[-8])
}
int loop1(num, iter)
{
while (bpf_iter_num_next(iter)) {
if (unlikely(bpf_get_prandom_u32()))
*(fp + num) = 7;
}
return 0
}
int loop1_wrapper(iter)
{
r6 = -32;
if (unlikely(bpf_get_prandom_u32()))
r6 = -31;
loop1(r6, iter);
return 0;
}
The unsafe state is reached in a similar manner, but the loop is
located inside a subprogram that is called from two locations in the
main subprogram. This detail is important for exercising
bpf_scc_visit->backedges memory management.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250611200836.4135542-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Yonghong Song
|
517b088a84 |
selftests/bpf: Fix cgroup_mprog_ordering failure due to uninitialized variable
On arm64, the cgroup_mprog_ordering selftest failed with test_progs run
when building with clang compiler. The reason is due to socklen_t optlen
not initialized.
In kernel function do_ip_getsockopt(), we have
if (copy_from_sockptr(&len, optlen, sizeof(int)))
return -EFAULT;
if (len < 0)
return -EINVAL;
The above 'len' variable is a negative value and hence the test failed.
But the test is okay on x86_64. I checked the x86_64 asm code and I didn't
see explicit initialization of 'optlen' but its value is 0 so kernel
didn't return error. This should be a pure luck.
Fix the bug by initializing 'oplen' var properly.
Fixes:
|
||
|
Luis Gerhorst
|
4a8765d9a5 |
selftests/bpf: Add test for Spectre v1 mitigation
This is based on the gadget from the description of commit 9183671af6db
("bpf: Fix leakage under speculation on mispredicted branches").
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250603212814.338867-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Luis Gerhorst
|
d6f1c85f22 |
bpf: Fall back to nospec for Spectre v1
This implements the core of the series and causes the verifier to fall
back to mitigating Spectre v1 using speculation barriers. The approach
was presented at LPC'24 [1] and RAID'24 [2].
If we find any forbidden behavior on a speculative path, we insert a
nospec (e.g., lfence speculation barrier on x86) before the instruction
and stop verifying the path. While verifying a speculative path, we can
furthermore stop verification of that path whenever we encounter a
nospec instruction.
A minimal example program would look as follows:
A = true
B = true
if A goto e
f()
if B goto e
unsafe()
e: exit
There are the following speculative and non-speculative paths
(`cur->speculative` and `speculative` referring to the value of the
push_stack() parameters):
- A = true
- B = true
- if A goto e
- A && !cur->speculative && !speculative
- exit
- !A && !cur->speculative && speculative
- f()
- if B goto e
- B && cur->speculative && !speculative
- exit
- !B && cur->speculative && speculative
- unsafe()
If f() contains any unsafe behavior under Spectre v1 and the unsafe
behavior matches `state->speculative &&
error_recoverable_with_nospec(err)`, do_check() will now add a nospec
before f() instead of rejecting the program:
A = true
B = true
if A goto e
nospec
f()
if B goto e
unsafe()
e: exit
Alternatively, the algorithm also takes advantage of nospec instructions
inserted for other reasons (e.g., Spectre v4). Taking the program above
as an example, speculative path exploration can stop before f() if a
nospec was inserted there because of Spectre v4 sanitization.
In this example, all instructions after the nospec are dead code (and
with the nospec they are also dead code speculatively).
For this, it relies on the fact that speculation barriers generally
prevent all later instructions from executing if the speculation was not
correct:
* On Intel x86_64, lfence acts as full speculation barrier, not only as
a load fence [3]:
An LFENCE instruction or a serializing instruction will ensure that
no later instructions execute, even speculatively, until all prior
instructions complete locally. [...] Inserting an LFENCE instruction
after a bounds check prevents later operations from executing before
the bound check completes.
This was experimentally confirmed in [4].
* On AMD x86_64, lfence is dispatch-serializing [5] (requires MSR
C001_1029[1] to be set if the MSR is supported, this happens in
init_amd()). AMD further specifies "A dispatch serializing instruction
forces the processor to retire the serializing instruction and all
previous instructions before the next instruction is executed" [8]. As
dispatch is not specific to memory loads or branches, lfence therefore
also affects all instructions there. Also, if retiring a branch means
it's PC change becomes architectural (should be), this means any
"wrong" speculation is aborted as required for this series.
* ARM's SB speculation barrier instruction also affects "any instruction
that appears later in the program order than the barrier" [6].
* PowerPC's barrier also affects all subsequent instructions [7]:
[...] executing an ori R31,R31,0 instruction ensures that all
instructions preceding the ori R31,R31,0 instruction have completed
before the ori R31,R31,0 instruction completes, and that no
subsequent instructions are initiated, even out-of-order, until
after the ori R31,R31,0 instruction completes. The ori R31,R31,0
instruction may complete before storage accesses associated with
instructions preceding the ori R31,R31,0 instruction have been
performed
Regarding the example, this implies that `if B goto e` will not execute
before `if A goto e` completes. Once `if A goto e` completes, the CPU
should find that the speculation was wrong and continue with `exit`.
If there is any other path that leads to `if B goto e` (and therefore
`unsafe()`) without going through `if A goto e`, then a nospec will
still be needed there. However, this patch assumes this other path will
be explored separately and therefore be discovered by the verifier even
if the exploration discussed here stops at the nospec.
This patch furthermore has the unfortunate consequence that Spectre v1
mitigations now only support architectures which implement BPF_NOSPEC.
Before this commit, Spectre v1 mitigations prevented exploits by
rejecting the programs on all architectures. Because some JITs do not
implement BPF_NOSPEC, this patch therefore may regress unpriv BPF's
security to a limited extent:
* The regression is limited to systems vulnerable to Spectre v1, have
unprivileged BPF enabled, and do NOT emit insns for BPF_NOSPEC. The
latter is not the case for x86 64- and 32-bit, arm64, and powerpc
64-bit and they are therefore not affected by the regression.
According to commit
|
||
|
Tao Chen
|
d77efc0ef5 |
selftests/bpf: Add cookies check for tracing fill_link_info test
Adding tests for getting cookie with fill_link_info for tracing. Signed-off-by: Tao Chen <chen.dylane@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250606165818.3394397-2-chen.dylane@linux.dev |
||
|
Ihor Solodrai
|
260b862918 |
selftests/bpf: Add test cases with CONST_PTR_TO_MAP null checks
A test requires the following to happen: * CONST_PTR_TO_MAP value is checked for null * the code in the null branch fails verification Add test cases: * direct global map_ptr comparison to null * lookup inner map, then two checks (the first transforms map_value_or_null into map_ptr) * lookup inner map, spill-fill it, then check for null * use an array of ringbufs to recreate a common coding pattern [1] [1] https://lore.kernel.org/bpf/CAEf4BzZNU0gX_sQ8k8JaLe1e+Veth3Rk=4x7MDhv=hQxvO8EDw@mail.gmail.com/ Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Ihor Solodrai <isolodrai@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250609183024.359974-4-isolodrai@meta.com |
||
|
Ihor Solodrai
|
eb6c992784 |
selftests/bpf: Add cmp_map_pointer_with_const test
Add a test for CONST_PTR_TO_MAP comparison with a non-0 constant. A BPF program with this code must not pass verification in unpriv. Signed-off-by: Ihor Solodrai <isolodrai@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250609183024.359974-3-isolodrai@meta.com |
||
|
Ihor Solodrai
|
5534e58f2e |
bpf: Make reg_not_null() true for CONST_PTR_TO_MAP
When reg->type is CONST_PTR_TO_MAP, it can not be null. However the verifier explores the branches under rX == 0 in check_cond_jmp_op() even if reg->type is CONST_PTR_TO_MAP, because it was not checked for in reg_not_null(). Fix this by adding CONST_PTR_TO_MAP to the set of types that are considered non nullable in reg_not_null(). An old "unpriv: cmp map pointer with zero" selftest fails with this change, because now early out correctly triggers in check_cond_jmp_op(), making the verification to pass. In practice verifier may allow pointer to null comparison in unpriv, since in many cases the relevant branch and comparison op are removed as dead code. So change the expected test result to __success_unpriv. Signed-off-by: Ihor Solodrai <isolodrai@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250609183024.359974-2-isolodrai@meta.com |
||
|
Yonghong Song
|
e422d5f118 |
selftests/bpf: Add two selftests for mprog API based cgroup progs
Two tests are added:
- cgroup_mprog_opts, which mimics tc_opts.c ([1]). Both prog and link
attach are tested. Some negative tests are also included.
- cgroup_mprog_ordering, which actually runs the program with some mprog
API flags.
[1] https://github.com/torvalds/linux/blob/master/tools/testing/selftests/bpf/prog_tests/tc_opts.c
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163156.2429955-1-yonghong.song@linux.dev
|
||
|
Yonghong Song
|
c1bb68656b |
selftests/bpf: Move some tc_helpers.h functions to test_progs.h
Move static inline functions id_from_prog_fd() and id_from_link_fd() from prog_tests/tc_helpers.h to test_progs.h so these two functions can be reused for later cgroup mprog selftests. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250606163151.2429325-1-yonghong.song@linux.dev |
||
|
Yonghong Song
|
bbc7bd658d |
selftests/bpf: Fix a user_ringbuf failure with arm64 64KB page size
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries properly. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250607013626.1553001-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Yonghong Song
|
8c8c5e3c85 |
selftests/bpf: Fix ringbuf/ringbuf_write test failure with arm64 64KB page size
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries and other related metrics properly. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250607013621.1552332-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Yonghong Song
|
377d371590 |
selftests/bpf: Fix bpf_mod_race test failure with arm64 64KB page size
Currently, uffd_register.range.len is set to 4096 for command 'ioctl(uffd, UFFDIO_REGISTER, &uffd_register)'. For arm64 64KB page size, the len must be 64KB size aligned as page size alignment is required. See fs/userfaultfd.c:validate_unaligned_range(). Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250607013615.1551783-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Yonghong Song
|
ae8824037a |
selftests/bpf: Reduce test_xdp_adjust_frags_tail_grow logs
For selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow, if tested failure,
I see a long list of log output like
...
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
...
There are total 7374 lines of the above which is too much. Let us
only issue such logs when it is an assert failure.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013610.1551399-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Rong Tao
|
64a064ce33 |
selftests/bpf: rbtree: Fix incorrect global variable usage
Within __add_three() function, should use function parameters instead of global variables. So that the variables groot_nested.inner.root and groot_nested.inner.glock in rbtree_add_nodes_nested() are tested correctly. Signed-off-by: Rong Tao <rongtao@cestc.cn> Link: https://lore.kernel.org/r/tencent_3DD7405C0839EBE2724AC5FA357B5402B105@qq.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Blake Jones
|
a570f386f3 |
Tests for the ".emit_strings" functionality in the BTF dumper.
When this mode is turned on, "emit_zeroes" and "compact" have no effect, and embedded NUL characters always terminate printing of an array. Signed-off-by: Blake Jones <blakejones@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250603203701.520541-2-blakejones@google.com |
||
|
Tao Chen
|
25a0d04d38 |
selftests/bpf: Add cookies check for raw_tp fill_link_info test
Adding tests for getting cookie with fill_link_info for raw_tp. Signed-off-by: Tao Chen <chen.dylane@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20250603154309.3063644-2-chen.dylane@linux.dev |
||
|
Linus Torvalds
|
64980441d2 |
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov: "Two small fixes to selftests" * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Fix selftest btf_tag/btf_type_tag_percpu_vmlinux_helper failure selftests/bpf: Fix bpf selftest build error |
||
|
Linus Torvalds
|
fd1f847350 |
Merge tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton: - "zram: support algorithm-specific parameters" from Sergey Senozhatsky adds infrastructure for passing algorithm-specific parameters into zram. A single parameter `winbits' is implemented at this time. - "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg charging nmi-safe, which is required by BFP, which can operate in NMI context. - "Some random fixes and cleanup to shmem" from Kemeng Shi implements small fixes and cleanups in the shmem code. - "Skip mm selftests instead when kernel features are not present" from Zi Yan fixes some issues in the MM selftest code. - "mm/damon: build-enable essential DAMON components by default" from SeongJae Park reworks DAMON Kconfig to make it easier to enable CONFIG_DAMON. - "sched/numa: add statistics of numa balance task migration" from Libo Chen adds more info into sysfs and procfs files to improve visibility into the NUMA balancer's task migration activity. - "selftests/mm: cow and gup_longterm cleanups" from Mark Brown provides various updates to some of the MM selftests to make them play better with the overall containing framework. * tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits) mm/khugepaged: clean up refcount check using folio_expected_ref_count() selftests/mm: fix test result reporting in gup_longterm selftests/mm: report unique test names for each cow test selftests/mm: add helper for logging test start and results selftests/mm: use standard ksft_finished() in cow and gup_longterm selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled sched/numa: add statistics of numa balance task sched/numa: fix task swap by skipping kernel threads tools/testing: check correct variable in open_procmap() tools/testing/vma: add missing function stub mm/gup: update comment explaining why gup_fast() disables IRQs selftests/mm: two fixes for the pfnmap test mm/khugepaged: fix race with folio split/free using temporary reference mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order mmu_notifiers: remove leftover stub macros selftests/mm: deduplicate test names in madv_populate kcov: rust: add flags for KCOV with Rust mm: rust: make CONFIG_MMU ifdefs more narrow mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables() mm/damon/Kconfig: enable CONFIG_DAMON by default ... |
||
|
Linus Torvalds
|
7f9039c524 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
|
||
|
Yonghong Song
|
baa39c169d |
selftests/bpf: Fix selftest btf_tag/btf_type_tag_percpu_vmlinux_helper failure
Ihor Solodrai reported selftest 'btf_tag/btf_type_tag_percpu_vmlinux_helper' failure ([1]) during 6.16 merge window. The failure log: ... 7: (15) if r0 == 0x0 goto pc+1 ; R0=ptr_css_rstat_cpu() ; *(volatile int *)rstat; @ btf_type_tag_percpu.c:68 8: (61) r1 = *(u32 *)(r0 +0) cannot access ptr member updated_children with moff 0 in struct css_rstat_cpu with off 0 size 4 Two changes are needed. First, 'struct cgroup_rstat_cpu' needs to be replaced with 'struct css_rstat_cpu' to be consistent with new data structure. Second, layout of 'css_rstat_cpu' is changed compared to 'cgroup_rstat_cpu'. The first member becomes a pointer so the bpf prog needs to do 8-byte load instead of 4-byte load. [1] https://lore.kernel.org/bpf/6f688f2e-7d26-423a-9029-d1b1ef1c938a@linux.dev/ Cc: Ihor Solodrai <ihor.solodrai@linux.dev> Cc: JP Kobryn <inwardvessel@gmail.com> Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: JP Kobryn <inwardvessel@gmail.com> Link: https://lore.kernel.org/r/20250529201151.1787575-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Saket Kumar Bhaskar
|
4b65d5ae97 |
selftests/bpf: Fix bpf selftest build error
On linux-next, build for bpf selftest displays an error due to mismatch in the expected function signature of bpf_testmod_test_read and bpf_testmod_test_write. Commit |
||
|
Mark Brown
|
66bce7afba |
selftests/mm: fix test result reporting in gup_longterm
The kselftest framework uses the string logged when a test result is reported as the unique identifier for a test, using it to track test results between runs. The gup_longterm test fails to follow this pattern, it runs a single test function repeatedly with various parameters but each result report is a string logging an error message which is fixed between runs. Since the code already logs each test uniquely before it starts refactor to also print this to a buffer, then use that name as the test result. This isn't especially pretty but is relatively straightforward and is a great help to tooling. Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-4-ff198df8e38e@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mark Brown
|
3f2d9a9ac5 |
selftests/mm: report unique test names for each cow test
The kselftest framework uses the string logged when a test result is reported as the unique identifier for a test, using it to track test results between runs. The cow test completely fails to follow this pattern, it runs test functions repeatedly with various parameters with each result report from those functions being a string logging an error message which is fixed between runs. Since the code already logs each test uniquely before it starts refactor to also print this to a buffer, then use that name as the test result. This isn't especially pretty but is relatively straightforward and is a great help to tooling. Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-3-ff198df8e38e@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mark Brown
|
3f192afbed |
selftests/mm: add helper for logging test start and results
Several of the MM tests have a pattern of printing a description of the test to be run then reporting the actual TAP result using a generic string not connected to the specific test, often in a shared function used by many tests. The name reported typically varies depending on the specific result rather than the test too. This causes problems for tooling that works with test results, the names reported with the results are used to deduplicate tests and track them between runs so both duplicated names and changing names cause trouble for things like UIs and automated bisection. As a first step towards matching these tests better with the expectations of kselftest provide helpers which record the test name as part of the initial print and then use that as part of reporting a result. This is not added as a generic kselftest helper partly because the use of a variable to store the test name doesn't fit well with the header only implementation of kselftest.h and partly because it's not really an intended pattern. Ideally at some point the mm tests that use it will be updated to not need it. Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-2-ff198df8e38e@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mark Brown
|
109364fce5 |
selftests/mm: use standard ksft_finished() in cow and gup_longterm
Patch series "selftests/mm: cow and gup_longterm cleanups", v2. The bulk of these changes modify the cow and gup_longterm tests to report unique and stable names for each test, bringing them into line with the expectations of tooling that works with kselftest. The string reported as a test result is used by tooling to both deduplicate tests and track tests between test runs, using the same string for multiple tests or changing the string depending on test result causes problems for user interfaces and automation such as bisection. It was suggested that converting to use kselftest_harness.h would be a good way of addressing this, however that really wants the set of tests to run to be known at compile time but both test programs dynamically enumarate the set of huge page sizes the system supports and test each. Refactoring to handle this would be even more invasive than these changes which are large but straightforward and repetitive. A version of the main gup_longterm cleanup was previously sent separately, this version factors out the helpers for logging the start of the test since the cow test looks very similar. This patch (of 4): The cow and gup_longterm test programs open code something that looks a lot like the standard ksft_finished() helper to summarise the test results and provide an exit code, convert to use ksft_finished(). Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-0-ff198df8e38e@kernel.org Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-1-ff198df8e38e@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Enze Li
|
79509ec1d2 |
selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
When CONFIG_DAMON_SYSFS is disabled, the selftests fail with the following outputs, not ok 2 selftests: damon: sysfs_update_schemes_tried_regions_wss_estimation.py # exit=1 not ok 3 selftests: damon: damos_quota.py # exit=1 not ok 4 selftests: damon: damos_quota_goal.py # exit=1 not ok 5 selftests: damon: damos_apply_interval.py # exit=1 not ok 6 selftests: damon: damos_tried_regions.py # exit=1 not ok 7 selftests: damon: damon_nr_regions.py # exit=1 not ok 11 selftests: damon: sysfs_update_schemes_tried_regions_hang.py # exit=1 The root cause of this issue is that all the testcases above do not check the sysfs interface of DAMON whether it exists or not. With this patch applied, all the testcases above now pass successfully. Link: https://lkml.kernel.org/r/20250531093937.1555159-1-lienze@kylinos.cn Signed-off-by: Enze Li <lienze@kylinos.cn> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Dan Carpenter
|
83da212b7f |
tools/testing: check correct variable in open_procmap()
Check if "procmap_out->fd" is negative instead of "procmap_out" (which is
a pointer).
Link: https://lkml.kernel.org/r/aDbFuUTlJTBqziVd@stanley.mountain
Fixes:
|
||
|
David Hildenbrand
|
bb084994d3 |
selftests/mm: two fixes for the pfnmap test
When unregistering the signal handler, we have to pass SIG_DFL, and
blindly reading from PFN 0 and PFN 1 seems to be problematic on !x86
systems. In particularly, on arm64 tx2 machines where noting resides at
these physical memory locations, we can generate RAS errors.
Let's fix it by scanning /proc/iomem for actual "System RAM".
Link: https://lkml.kernel.org/r/20250528195244.1182810-1-david@redhat.com
Fixes:
|
||
|
Mark Brown
|
cfc695109a |
selftests/mm: deduplicate test names in madv_populate
The madv_populate selftest has some repetitive code for several different cases that it covers, included repeated test names used in ksft_test_result() reports. This causes problems for automation, the test name is used to both track the test between runs and distinguish between multiple tests within the same run. Fix this by tweaking the messages with duplication to be more specific about the contexts they're in. Link: https://lkml.kernel.org/r/20250522-selftests-mm-madv-populate-dedupe-v1-1-fd1dedd79b4b@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Zi Yan
|
115155901d |
selftests/mm: skip hugevm test if kernel config file is not present
When running hugevm tests in a machine without kernel config present, e.g., a VM running a kernel without CONFIG_IKCONFIG_PROC nor /boot/config-*, skip hugevm tests, which reads kernel config to get page table level information. Link: https://lkml.kernel.org/r/20250516132938.356627-3-ziy@nvidia.com Signed-off-by: Zi Yan <ziy@nvidia.com> Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Adam Sindelar <adam@wowsignal.io> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Pedro Falcato <pfalcato@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Zi Yan
|
6d21130312 |
selftests/mm: skip guard_regions.uffd tests when uffd is not present
Patch series "Skip mm selftests instead when kernel features are not present", v2. Two guard_regions tests on userfaultfd fail when userfaultfd is not present. Skip them instead. hugevm test reads kernel config to get page table level information and fails when neither /proc/config.gz nor /boot/config-* is present. Skip it instead. This patch (of 2): When userfaultfd is not compiled into kernel, userfaultfd() returns -1, causing guard_regions.uffd tests to fail. Skip the tests instead. Link: https://lkml.kernel.org/r/20250516132938.356627-1-ziy@nvidia.com Link: https://lkml.kernel.org/r/20250516132938.356627-2-ziy@nvidia.com Signed-off-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Pedro Falcato <pfalcato@suse.de> Cc: Adam Sindelar <adam@wowsignal.io> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mark Brown
|
9abb8c208f |
selftests/mm: deduplicate default page size test results in thuge-gen
The thuge-gen test program runs mmap() and shmget() tests for both every available page size and the default page size, resulting in two tests for the default size. These tests are distinct since the flags in the default case do not specify an explicit size, add the flags to the test name that is logged to deduplicate. Link: https://lkml.kernel.org/r/20250515-selfests-mm-thuge-gen-dup-v1-1-057d2836553f@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Dev Jain <dev.jain@arm.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mark Brown
|
62973e3867 |
selftests/mm: deduplicate test logging in test_mlock_lock()
The mlock2-tests test_mlock_lock() test reports two test results with an identical string, one reporitng if it successfully locked a block of memory and another reporting if the lock is still present after doing an unlock (following a similar pattern to other tests in the same program). This confuses test automation since the test string is used to deduplicate tests, change the post unlock test to report "Unlocked" instead like the other tests to fix this. Link: https://lkml.kernel.org/r/20250515-selftest-mm-mlock2-dup-v1-1-963d5d7d243a@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Dev Jain <dev.jain@arm.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
7d4e49a77d |
Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
|
||
|
Linus Torvalds
|
00c010e130 |
Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton: - "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - "Always call constructor for kernel page tables" from Kevin Brodsky ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables. This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - "vmscan: enforce mems_effective during demotion" from Gregory Price changes reclaim to respect cpuset.mems_effective during demotion when possible. because presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated. This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently. - "Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents. - "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. * tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits) mm: pcp: increase pcp->free_count threshold to trigger free_high mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range() mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page mm/hugetlb: pass folio instead of page to unmap_ref_private() memcg: objcg stock trylock without irq disabling memcg: no stock lock for cpu hot-unplug memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs memcg: make count_memcg_events re-entrant safe against irqs memcg: make mod_memcg_state re-entrant safe against irqs memcg: move preempt disable to callers of memcg_rstat_updated memcg: memcg_rstat_updated re-entrant safe against irqs mm: khugepaged: decouple SHMEM and file folios' collapse selftests/eventfd: correct test name and improve messages alloc_tag: check mem_profiling_support in alloc_tag_init Docs/damon: update titles and brief introductions to explain DAMOS selftests/damon/_damon_sysfs: read tried regions directories in order mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject() mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat() mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs ... |
||
|
Mark Brown
|
4cb6c8af85 |
selftests/filesystems: Fix build of anon_inode_test
The newly added anon_inode_test test fails to build due to attempting to
include a nonexisting overlayfs/wrapper.h:
anon_inode_test.c:10:10: fatal error: overlayfs/wrappers.h: No such file or directory
10 | #include "overlayfs/wrappers.h"
| ^~~~~~~~~~~~~~~~~~~~~~
This is due to
|
||
|
Linus Torvalds
|
b78f1293f9 |
Merge tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt: - Have module addresses get updated in the persistent ring buffer The addresses of the modules from the previous boot are saved in the persistent ring buffer. If the same modules are loaded and an address is in the old buffer points to an address that was both saved in the persistent ring buffer and is loaded in memory, shift the address to point to the address that is loaded in memory in the trace event. - Print function names for irqs off and preempt off callsites When ignoring the print fmt of a trace event and just printing the fields directly, have the fields for preempt off and irqs off events still show the function name (via kallsyms) instead of just showing the raw address. - Clean ups of the histogram code The histogram functions saved over 800 bytes on the stack to process events as they come in. Instead, create per-cpu buffers that can hold this information and have a separate location for each context level (thread, softirq, IRQ and NMI). Also add some more comments to the code. - Add "common_comm" field for histograms Add "common_comm" that uses the current->comm as a field in an event histogram and acts like any of the other fields of the event. - Show "subops" in the enabled_functions file When the function graph infrastructure is used, a subsystem has a "subops" that it attaches its callback function to. Instead of the enabled_functions just showing a function calling the function that calls the subops functions, also show the subops functions that will get called for that function too. - Add "copy_trace_marker" option to instances There are cases where an instance is created for tooling to write into, but the old tooling has the top level instance hardcoded into the application. New tools want to consume the data from an instance and not the top level buffer. By adding a copy_trace_marker option, whenever the top instance trace_marker is written into, a copy of it is also written into the instance with this option set. This allows new tools to read what old tools are writing into the top buffer. If this option is cleared by the top instance, then what is written into the trace_marker is not written into the top instance. This is a way to redirect the trace_marker writes into another instance. - Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp() If a tracepoint is created by DECLARE_TRACE() instead of TRACE_EVENT(), then it will not be exposed via tracefs. Currently there's no way to differentiate in the kernel the tracepoint functions between those that are exposed via tracefs or not. A calling convention has been made manually to append a "_tp" prefix for events created by DECLARE_TRACE(). Instead of doing this manually, force it so that all DECLARE_TRACE() events have this notation. - Use __string() for task->comm in some sched events Instead of hardcoding the comm to be TASK_COMM_LEN in some of the scheduler events use __string() which makes it dynamic. Note, if these events are parsed by user space it they may break, and the event may have to be converted back to the hardcoded size. - Have function graph "depth" be unsigned to the user Internally to the kernel, the "depth" field of the function graph event is signed due to -1 being used for end of boundary. What actually gets recorded in the event itself is zero or positive. Reflect this to user space by showing "depth" as unsigned int and be consistent across all events. - Allow an arbitrary long CPU string to osnoise_cpus_write() The filtering of which CPUs to write to can exceed 256 bytes. If a machine has 256 CPUs, and the filter is to filter every other CPU, the write would take a string larger than 256 bytes. Instead of using a fixed size buffer on the stack that is 256 bytes, allocate it to handle what is passed in. - Stop having ftrace check the per-cpu data "disabled" flag The "disabled" flag in the data structure passed to most ftrace functions is checked to know if tracing has been disabled or not. This flag was added back in 2008 before the ring buffer had its own way to disable tracing. The "disable" flag is now not always set when needed, and the ring buffer flag should be used in all locations where the disabled is needed. Since the "disable" flag is redundant and incorrect, stop using it. Fix up some locations that use the "disable" flag to use the ring buffer info. - Use a new tracer_tracing_disable/enable() instead of data->disable flag There's a few cases that set the data->disable flag to stop tracing, but this flag is not consistently used. It is also an on/off switch where if a function set it and calls another function that sets it, the called function may incorrectly enable it. Use a new trace_tracing_disable() and tracer_tracing_enable() that uses a counter and can be nested. These use the ring buffer flags which are always checked making the disabling more consistent. - Save the trace clock in the persistent ring buffer Save what clock was used for tracing in the persistent ring buffer and set it back to that clock after a reboot. - Remove unused reference to a per CPU data pointer in mmiotrace functions - Remove unused buffer_page field from trace_array_cpu structure - Remove more strncpy() instances - Other minor clean ups and fixes * tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits) tracing: Fix compilation warning on arm32 tracing: Record trace_clock and recover when reboot tracing/sched: Use __string() instead of fixed lengths for task->comm tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix tracing: Cleanup upper_empty() in pid_list tracing: Allow the top level trace_marker to write into another instances tracing: Add a helper function to handle the dereference arg in verifier tracing: Remove unnecessary "goto out" that simply returns ret is trigger code tracing: Fix error handling in event_trigger_parse() tracing: Rename event_trigger_alloc() to trigger_data_alloc() tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf tracing: Remove unused buffer_page field from trace_array_cpu structure tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer tracing: Convert the per CPU "disabled" counter to local from atomic tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field ring-buffer: Add ring_buffer_record_is_on_cpu() tracing: Do not use per CPU array_buffer.data->disabled for cpumask ftrace: Do not disabled function graph based on "disabled" field tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one() ... |
||
|
Linus Torvalds
|
43db111107 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit
|
||
|
Linus Torvalds
|
90b83efa67 |
Merge tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
|
||
|
Linus Torvalds
|
1b98f357da |
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|