37554 Commits

Author	SHA1	Message	Date
Linus Torvalds	7fdaba9129	Merge tag 'rtc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux ... Pull RTC updates from Alexandre Belloni: "There are two new drivers this cycle. There is also support for a negative offset for RTCs that have been shipped with a date set using an epoch that is before 1970. This unfortunately happens with some products that ship with a vendor kernel and an out of tree driver. Core: - support negative offsets for RTCs that have shipped with an epoch earlier than 1970 New drivers: - NXP S32G2/S32G3 - Sophgo CV1800 Drivers: - loongson: fix missing alarm notifications for ACPI - m41t80: kickstart ocillator upon failure - mt6359: mt6357 support - pcf8563: fix wrong alarm register - sh: cleanups" * tag 'rtc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (39 commits) rtc: mt6359: Add mt6357 support rtc: test: Test date conversion for dates starting in 1900 rtc: test: Also test time and wday outcome of rtc_time64_to_tm() rtc: test: Emit the seconds-since-1970 value instead of days-since-1970 rtc: Fix offset calculation for .start_secs < 0 rtc: Make rtc_time64_to_tm() support dates before 1970 rtc: pcf8563: fix wrong alarm register rtc: rzn1: support input frequencies other than 32768Hz rtc: rzn1: Disable controller before initialization dt-bindings: rtc: rzn1: add optional second clock rtc: m41t80: reduce verbosity rtc: m41t80: kickstart ocillator upon failure rtc: s32g: add NXP S32G2/S32G3 SoC support dt-bindings: rtc: add schema for NXP S32G2/S32G3 SoCs dt-bindings: at91rm9260-rtt: add microchip,sama7d65-rtt dt-bindings: rtc: at91rm9200: add microchip,sama7d65-rtc rtc: loongson: Add missing alarm notifications for ACPI RTC events rtc: sophgo: add rtc support for Sophgo CV1800 SoC rtc: stm32: drop unused module alias rtc: s3c: drop unused module alias ...	2025-06-05 08:54:47 -07:00
Linus Torvalds	bfdf35c5dc	Merge tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine ... Pull dmaengine updates from Vinod Koul: "A fairly small update for the dmaengine subsystem. This has a new ARM dmaengine driver and couple of new device support and few driver changes: New support: - Renesas RZ/V2H(P) dma support for r9a09g057 - Arm DMA-350 driver - Tegra Tegra264 ADMA support Updates: - AMD ptdma driver code removal and optimizations - Freescale edma error interrupt handler support" * tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits) dmaengine: idxd: Remove unused pointer and macro arm64: dts: renesas: r9a09g057: Add DMAC nodes dmaengine: sh: rz-dmac: Add RZ/V2H(P) support dmaengine: sh: rz-dmac: Allow for multiple DMACs irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req() dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only dmaengine: ti: Add NULL check in udma_probe() fsldma: Set correct dma_mask based on hw capability dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using dmaengine: xilinx_dma: Set dma_device directions dmaengine: tegra210-adma: Add Tegra264 support dt-bindings: Document Tegra264 ADMA support dmaengine: dw-edma: Add HDMA NATIVE map check dmaegnine: fsl-edma: add edma error interrupt handler dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names dmaengine: ARM_DMA350 should depend on ARM/ARM64 dt-bindings: dma: qcom,bam: Document dma-coherent property dmaengine: Add Arm DMA-350 driver ...	2025-06-05 08:49:30 -07:00
Linus Torvalds	d12ed2b7e1	Merge tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy ... Pull phy updates from Vinod Koul: "As usual featuring couple of new driver and bunch of new device support and some driver changes to Freescale, rockchip driver along with couple of yaml binding conversions. New Support: - Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver - Rockchip usb2 support for RK3562, RK3036 usb2 phy support - Samsung exynos2200 eusb2 phy support and driver refactoring for this support, exynos7870 USBDRD support - Mediatek MT7988 xs-phy support - Broadcom BCM74110 usb phy support - Renesas RZ/V2H(P) usb2 phy support Updates: - Freescale phy rate claculation updates, i.MX95 tuning support - Better error handling for amlogic pcie phy - Rockchip color depth configuration and management support - Yaml binding conversion for RK3399 Type-C and PCIe Phy" * tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits) phy: tegra: p2u: Broaden architecture dependency phy: rockchip: inno-usb2: Add usb2 phy support for rk3562 dt-bindings: phy: rockchip,inno-usb2phy: add rk3562 phy: rockchip: inno-usb2: add phy definition for rk3036 dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P) phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller phy: phy-snps-eusb2: add support for exynos2200 phy: phy-snps-eusb2: refactor reference clock init phy: phy-snps-eusb2: make reset control optional phy: phy-snps-eusb2: make repeater optional phy: phy-snps-eusb2: split phy init code phy: phy-snps-eusb2: refactor constructs names phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory ...	2025-06-05 08:20:21 -07:00
Linus Torvalds	3719a04a80	Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci ... Pull pci updates from Bjorn Helgaas: "Enumeration: - Print the actual delay time in pci_bridge_wait_for_secondary_bus() instead of assuming it was 1000ms (Wilfred Mallawa) - Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices', which broke resume from system sleep on AMD platforms and has been fixed by other commits (Lukas Wunner) Resource management: - Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and unnecessary (Philipp Stanner) - Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and related flags since all uses have been removed (Philipp Stanner) - Rework devres 'request' functions so they are no longer 'hybrid', i.e., their behavior no longer depends on whether pcim_enable_device or pci_enable_device() was used, and remove related code (Philipp Stanner) - Warn (not BUG()) about failure to assign optional resources (Ilpo Järvinen) Error handling: - Log the DPC Error Source ID only when it's actually valid (when ERR_FATAL or ERR_NONFATAL was received from a downstream device) and decode into bus/device/function (Bjorn Helgaas) - Determine AER log level once and save it so all related messages use the same level (Karolina Stolarek) - Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable Errors (Karolina Stolarek) - Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs controls on interval and burst count, to avoid flooding logs and RCU stall warnings (Jon Pan-Doh) Power management: - Increment PM usage counter when probing reset methods so we don't try to read config space of a powered-off device (Alex Williamson) - Set all devices to D0 during enumeration to ensure ACPI opregion is connected via _REG (Mario Limonciello) Power control: - Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the filename paths. Retain old deprecated symbols for compatibility, except for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold) - When unregistering pwrctrl, cancel outstanding rescan work before cleaning up data structures to avoid use-after-free issues (Brian Norris) Bandwidth control: - Simplify link bandwidth controller by replacing the count of Link Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag (Ilpo Järvinen) - Update the Link Speed after retraining, since the Link Speed may have changed (Ilpo Järvinen) PCIe native device hotplug: - Ignore Presence Detect Changed caused by DPC. pciehp already ignores Link Down/Up events caused by DPC, but on slots using in-band presence detect, DPC causes a spurious Presence Detect Changed event (Lukas Wunner) - Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports using in-band presence detect, the reset causes a Presence Detect Changed event, which mistakenly caused teardown and re-enumeration of the device. Drivers may need to annotate code that resets their device (Lukas Wunner) Virtualization: - Add an ACS quirk for Loongson Root Ports that don't advertise ACS but don't allow peer-to-peer transactions between Root Ports; the quirk allows each Root Port to be in a separate IOMMU group (Huacai Chen) Endpoint framework: - For fixed-size BARs, retain both the actual size and the possibly larger size allocated to accommodate iATU alignment requirements (Jerome Brunet) - Simplify ctrl/SPAD space allocation and avoid allocating more space than needed (Jerome Brunet) - Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint controllers (Niklas Cassel) - Align the return value (number of interrupts) encoding for pci_epc_get_msi()/pci_epc_ops::get_msi() and pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel) - Align the nr_irqs parameter encoding for pci_epc_set_msi()/pci_epc_ops::set_msi() and pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel) Common host controller library: - Convert pci-host-common to a library so platforms that don't need native host controller drivers don't need to include these helper functions (Manivannan Sadhasivam) Apple PCIe controller driver: - Extract ECAM bridge creation helper from pci_host_common_probe() to separate driver-specific things like MSI from PCI things (Marc Zyngier) - Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying capabilities (Marc Zyngier) - Skip ports disabled in DT when setting up ports (Janne Grunau) - Add t6020 compatible string (Alyssa Rosenzweig) - Add T602x PCIe support (Hector Martin) - Directly set/clear INTx mask bits because T602x dropped the accessors that could do this without locking (Marc Zyngier) - Move port PHY registers to their own reg items to accommodate T602x, which moves them around; retain default offsets for existing DTs that lack phy%d entries with the reg offsets (Hector Martin) - Stop polling for core refclk, which doesn't work on T602x and the bootloader has already done anyway (Hector Martin) - Use gpiod_set_value_cansleep() when asserting PERST# in probe because we're allowed to sleep there (Hector Martin) Cadence PCIe controller driver: - Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans Zhang) - Make the cadence core buildable as a module (Kishon Vijay Abraham I) - Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by loadable drivers when they are removed (Siddharth Vadapalli) Freescale i.MX6 PCIe controller driver: - Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard Zhu) - Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link(); since the DWC core does this, imx6 only needs it when retraining for a faster link speed (Richard Zhu) - Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu) - Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some cases, the controller can't exit 'L23 Ready' through Beacon or PERST# deassertion (Richard Zhu) - Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum: controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s, causing timeouts in L1 (Richard Zhu) - Wait for i.MX95 PLL lock before enabling controller (Richard Zhu) - Save/restore i.MX95 LUT for suspend/resume (Richard Zhu) Mobiveil PCIe controller driver: - Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans Zhang) NVIDIA Tegra194 PCIe controller driver: - Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM is enabled, since there are no other entries (Hans Zhang) Qualcomm PCIe controller driver: - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane equalization presets (Krishna Chaitanya Chundru) - Read Maximum Link Width from the Link Capabilities register if DT lacks 'num-lanes' property (Krishna Chaitanya Chundru) - Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru) - Add generic dwc support for configuring lane equalization presets (Krishna Chaitanya Chundru) - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar) Renesas R-Car PCIe controller driver: - Describe endpoint BAR 4 as being fixed size (Jerome Brunet) - Document how to obtain R-Car V4H (r8a779g0) controller firmware (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert() deasserts in reverse order, to fix a link training regression (Jensen Huang) - Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel) Rockchip DesignWare PCIe controller driver: - Check only PCIE_LINKUP, not LTSSM status, to determine whether the link is up (Shawn Lin) - Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root Complex and Endpoint modes (Shawn Lin) - Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets non-sticky registers (Shawn Lin) - Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit() (Diederik de Haas) Synopsys DesignWare PCIe controller driver: - Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more robust; this will not affect the intended link width if all lanes are functional (Wenbin Yao) - Return bool (not int) for link-up check in dw_pcie_ops.link_up() and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti (Hans Zhang) - Add debugfs support for exposing DWC device-specific PTM context (Manivannan Sadhasivam) TI J721E PCIe driver: - Make j721e buildable as a loadable and removable module (Siddharth Vadapalli) - Fix j721e host/endpoint dependencies that result in link failures in some configs (Arnd Bergmann) Device tree bindings: - Add qcom DT binding for 'global' interrupt (PCIe controller and link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p, sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan Sadhasivam) - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074, ipq8074-gen3, ipq6018 (Manivannan Sadhasivam) - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang) - Correct indentation and style of examples in brcm,stb-pcie, cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie, microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm (Krzysztof Kozlowski) - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and armada8k from text to schema DT bindings (Rob Herring) - Remove obsolete .txt DT bindings for content that has been moved to schemas (Rob Herring) - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074 and IPQ9574 (Varadarajan Narayanan) - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring) - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since PolarFire may be configured that way (Conor Dooley) Miscellaneous: - Drop 'pci' suffix from intel_mid_pci.c filename to match similar files (Andy Shevchenko) - All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU to simplify build testing and avoid inadvertent build regressions (Arnd Bergmann) - Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof Wilczyński) - Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan Sadhasivam)" * tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits) MAINTAINERS: Update Manivannan Sadhasivam email address PCI: j721e: Fix host/endpoint dependencies PCI: j721e: Add support to build as a loadable module PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup PCI: cadence: Add support to build pcie-cadence library as a kernel module MAINTAINERS: Update Krzysztof Wilczyński email address PCI: Remove unnecessary linesplit in __pci_setup_bridge() PCI: WARN (not BUG()) when we fail to assign optional resources PCI: Remove unused pci_printk() PCI: qcom: Replace PERST# sleep time with proper macro PCI: dw-rockchip: Replace PERST# sleep time with proper macro PCI: host-common: Convert to library for host controller drivers PCI/ERR: Remove misleading TODO regarding kernel panic PCI: cadence: Remove duplicate message code definitions PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding PCI: cadence-ep: Correct PBA offset in .set_msix() callback ...	2025-06-04 11:26:17 -07:00
Bjorn Helgaas	27b1aac553	Merge branch 'pci/dt-bindings' ... - Add qcom DT binding for 'global' interrupt (PCIe controller and link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p, sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan Sadhasivam) - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074, ipq8074-gen3, ipq6018 (Manivannan Sadhasivam) - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang) - Correct indentation and style of examples in brcm,stb-pcie, cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie, microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm (Krzysztof Kozlowski) - Fix include placement in sifive,fu740-pcie example (Krzysztof Kozlowski) - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and armada8k from text to schema DT bindings (Rob Herring) - Remove obsolete .txt DT bindings for content that has been moved to schemas (Rob Herring) - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074 and IPQ9574 (Varadarajan Narayanan) - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring) - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since PolarFire may be configured that way (Conor Dooley) * pci/dt-bindings: dt-bindings: PCI: microchip,pcie-host: Fix DMA coherency property dt-bindings: PCI: Convert v3,v360epc-pci to DT schema dt-bindings: PCI: qcom: Add MHI registers for IPQ9574 dt-bindings: PCI: Remove obsolete .txt docs dt-bindings: PCI: Convert marvell,armada8k-pcie to schema dt-bindings: PCI: Convert Marvell EBU to schema dt-bindings: PCI: sifive,fu740-pcie: Fix include placement in DTS example dt-bindings: PCI: Correct indentation and style in DTS example dt-bindings: PCI: dwc: rockchip: Add rk3562 support dt-bindings: PCI: dw: rockchip: Add rk3576 support dt-bindings: PCI: qcom,pcie-sc8180x: Add 'global' interrupt dt-bindings: PCI: qcom: Allow IPQ6018 to use 8 MSI and one 'global' interrupt dt-bindings: PCI: qcom: Allow IPQ8074 to use 8 MSI and one 'global' interrupt dt-bindings: PCI: qcom: Allow MSM8998 to use 8 MSI and one 'global' interrupt dt-bindings: PCI: qcom: Add 'global' interrupt for SDM845 SoC dt-bindings: PCI: qcom,pcie-sc7280: Add 'global' interrupt dt-bindings: PCI: qcom,pcie-sa8775p: Add 'global' interrupt dt-bindings: PCI: qcom,pcie-sm8350: Add 'global' interrupt dt-bindings: PCI: qcom,pcie-sm8250: Add 'global' interrupt dt-bindings: PCI: qcom,pcie-sm8150: Add 'global' interrupt	2025-06-04 10:50:45 -05:00
Bjorn Helgaas	05cf00aa05	Merge branch 'pci/controller/qcom' ... - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane equalization presets (Krishna Chaitanya Chundru) - Read Maximum Link Width from the Link Capabilities register if DT lacks 'num-lanes' property (Krishna Chaitanya Chundru) - Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru) - Add generic dwc support for configuring lane equalization presets (Krishna Chaitanya Chundru) - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar) * pci/controller/qcom: PCI: qcom: Add support for IPQ5018 dt-bindings: PCI: qcom: Add IPQ5018 SoC PCI: dwc: Add support for configuring lane equalization presets PCI: Add lane equalization register offsets PCI: dwc: Update pci->num_lanes to maximum supported link width PCI: of: Add of_pci_get_equalization_presets() API	2025-06-04 10:50:42 -05:00
Linus Torvalds	b546608ea2	Merge tag 'leds-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds ... Pull LED updates from Lee Jones: "LED Triggers: - Allow writing "default" to the sysfs 'trigger' attribute to set an LED to its default trigger - If the default trigger is "none", writing "default" will remove the current trigger - Updated sysfs ABI documentation for the new "default" trigger functionality LED KUnit Testing: - Provide a skeleton KUnit test suite for the LEDs framework - Expand the LED class device registration KUnit test to cover more scenarios, including 'brightness_get' behavior - Add KUnit tests for the LED lookup and get API ('led_add_lookup', 'devm_led_get') LED Flash Class: - Add support for setting flash/strobe duration through a new 'duration_set' op and 'led_set_flash_duration()' function, aligning with 'V4L2_CID_FLASH_DURATION' Texas Instruments TPS6131x: - Add a new driver for the TPS61310/TPS61311 flash LED controllers - The driver supports the device's three constant-current sinks for flash and torch modes LED Core: - Prevent potential 'snprintf()' truncations in LED names by checking for buffer overflows ChromeOS EC LEDs: - Avoid a -Wflex-array-member-not-at-end GCC warning by replacing an on-stack flexible structure definition with a utility function call Multicolor LEDs: - Fix issue where setting multi_intensity while software blinking is active could stop blinking PCA955x LEDs: - Avoid potential buffer overflow when creating default labels by changing a field's type to 'u8' and updating format specifiers PCA995x LEDs: - Fix a typo (stray space) in an 'of_device_id' entry in the 'pca995x_of_match' table Kconfig: - Prevent LED drivers from being enabled by default when 'COMPILE_TEST' is set Device Property API: - Split 'device_get_child_node_count()' into a new helper 'fwnode_get_child_node_count()' that doesn't require a device struct, making the API more symmetrical Driver Modernization (using 'fwnode_get_child_node_count()'): - Update 'leds-pwm-multicolor', 'leds-ncp5623' and 'leds-ncp5623' to use the new 'fwnode_get_child_node_count()' helper, removing their custom implementation - As above in the USB Type-C TCPM driver Driver Modernization (using new GPIO setter callbacks): - Convert 'leds-lgm-sso' to use new GPIO line value setter callbacks which return an integer for error handling - Convert 'leds-pca955x', 'leds-pca9532' and 'leds-tca6507' to use new GPIO setter callbacks Documentation: - Remove the '.rst' extension for 'leds-st1202' in the documentation index for consistency LP8860 LEDs: - Use 'regmap_multi_reg_write()' for EEPROM writes instead of manual looping - Use scoped mutex guards and 'devm_mutex_init()' to simplify function exits and ensure automatic cleanup - Remove default register definitions that are unused when regmap caching is not active - Use 'devm_regulator_get_enable_optional()' to handle the optional regulator, simplifying enabling and removing manual disabling - Refactor 'lp8860_unlock_eeprom()' to only perform the unlock operation, removing the lock part and an unnecessary parameter - Use a 'devm' action to disable the enable-GPIO, simplifying cleanup and error paths, and remove the now-empty '.remove()' function Turris Omnia LEDs: - Drop unnecessary commas in terminator entries of 'struct attribute' and 'struct of_device_id' arrays MT6370 RGB LEDs: - Use the 'LINEAR_RANGE()' for defining 'struct linear_range' entries to improve robustness Texas Instruments TPS6131x: - Add new devicetree bindings for the TI TPS61310/TPS61311 flash LED driver" * tag 'leds-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (31 commits) leds: tps6131x: Add support for Texas Instruments TPS6131X flash LED driver dt-bindings: leds: Add Texas Instruments TPS6131x flash LED driver leds: flash: Add support for flash/strobe duration leds: rgb: leds-mt6370-rgb: Improve definition of some struct linear_range leds: led-test: Provide tests for the lookup and get infrastructure leds: led-test: Fill out the registration test to cover more test cases leds: led-test: Remove standard error checking after KUNIT_ASSERT_*() leds: pca995x: Fix typo in pca995x_of_match's of_device_id entry leds: Provide skeleton KUnit testing for the LEDs framework leds: tca6507: Use new GPIO line value setter callbacks leds: pca9532: Use new GPIO line value setter callbacks leds: pca955x: Use new GPIO line value setter callbacks leds: lgm-sso: Use new GPIO line value setter callbacks leds: Do not enable by default during compile testing leds: turris-omnia: Drop commas in the terminator entries leds: lp8860: Disable GPIO with devm action leds: lp8860: Only unlock in lp8860_unlock_eeprom() leds: lp8860: Enable regulator using enable_optional helper leds: lp8860: Remove default regs when not caching leds: lp8860: Use new mutex guards to cleanup function exits ...	2025-06-03 12:10:31 -07:00
Linus Torvalds	69352bd52b	Merge tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd ... Pull MFD updates from Lee Jones: "Samsung Exynos ACPM: - Populate child platform devices from device tree data - Introduce a new API, 'devm_acpm_get_by_node()', for child devices to get the ACPM handle ROHM PMICs: - Add support for the ROHM BD96802 scalable companion PMIC to the BD96801 core driver - Add support for controlling the BD96802 using the BD96801 regulator driver - Add support to the BD96805, which is almost identical to the BD96801 - Add support to the BD96806, which is similar to the BD96802 Maxim MAX77759: - Add a core driver for the MAX77759 companion PMIC - Add a GPIO driver for the expander functions on the MAX77759 - Add an NVMEM driver to expose the non-volatile memory on the MAX77759 STMicroelectronics STM32MP25: - Add support for the STM32MP25 SoC to the stm32-lptimer - Add support for the STM32MP25 to the clocksource driver, handling new register access requirements - Add support for the STM32MP25 to the PWM driver, enabling up to two PWM outputs Broadcom BCM590xx: - Add support for the BCM59054 PMU - Parse the PMU ID and revision to support behavioral differences between chip revisions - Add regulator support for the BCM59054 Samsung S2MPG10: - Add support for the S2MPG10 PMIC, which communicates via the Samsung ACPM firmware instead of I2C Exynos ACPM: - Improve timeout detection reliability by using ktime APIs instead of a loop counter assumption - Allow PMIC access during late system shutdown by switching to 'udelay()' instead of a sleeping function - Fix an issue where reading command results longer than 8 bytes would fail - Silence non-error '-EPROBE_DEFER' messages during boot to clean up logs Exynos LPASS: - Fix an error handling path by switching to 'devm_regmap_init_mmio()' to prevent resource leaks - Fix a bug where 'exynos_lpass_disable()' was called twice in the remove function - Fix another resource leak in the probe's error path by using 'devm_add_action_or_reset()' Samsung SEC: - Handle the s2dos05, which does not have IRQ support, explicitly to prevent warnings - Fix the core driver to correctly handle errors from 'sec_irq_init()' instead of ignoring them STMPE-SPI: - Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro MAINTAINERS: - Adjust a file path for the Siemens IPC LED drivers entry to fix a broken reference Maxim Drivers: - Correct the spelling of "Electronics" in Samsung copyright headers across multiple files General: - Fix wakeup source memory leaks on device unbind for 88pm886, as3722, max14577, max77541, max77705, max8925, rt5033, and sprd-sc27xx drivers Samsung SEC Drivers: - Split the driver into a transport-agnostic core ('sec-core') and transport-specific ('sec-i2c', 'sec-acpm') modules to support non-I2C devices - Merge the 'sec-core' and 'sec-irq' modules to reduce memory consumption - Move internal APIs to a private header to clean up the public API - Improve code style by sorting includes, cleaning up headers, sorting device tables, and using helper macros like 'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG' - Make regmap configuration for s2dos05/s2mpu05 explicit to improve clarity - Rework platform data and regmap instantiation to use OF match data instead of a large switch statement ROHM BD96801/2: - Prepare the driver for new models by separating chip-specific data into its own structure - Drop IC name prefix from IRQ resource names in both the MFD and regulator drivers for simplification Broadcom BCM590xx: - Refactor the regulator driver to store descriptions in a table to ease support for new chips - Rename BCM59056-specific data to prepare for the addition of other regulators - Use 'dev_err_probe()' for cleaner error handling Exynos ACPM: - Correct kerneldoc warnings and use the conventional 'np' argument name General MFD: - Convert 'aat2870' and 'tps65010' to use the per-client debugfs directory provided by the I2C core - Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line value setter callbacks - Constify 'regmap_irq_chip' and other structures in '88pm886' to move data to read-only sections BCM590xx: - Drop the unused "id" member from the 'bcm590xx' struct in preparation for a replacement Samsung SEC Core: - Remove forward declarations for functions that no longer exist SM501: - Remove the unused 'sm501_find_clock()' function New Compatibles: - Google: Add a PMIC child node to the 'google,gs101-acpm-ipc' binding - ROHM: Add new bindings for 'rohm,bd96802-regulator' and 'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806 - Maxim: Add new bindings for 'maxim,max77759-gpio', 'maxim,max77759-nvmem', and the top-level 'maxim,max77759' - STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding - Broadcom: Add 'bcm59054' compatible - Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and 'microchip,sama7d65-secumod' compatibles - Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD binding - MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc', and 'mt8365-infracfg-nao' - Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic' syscon compatibles Refactoring & Cleanup: - Convert Broadcom BCM59056 devicetree bindings to YAML and split them into MFD and regulator parts - Convert the Microchip AT91 secumod binding to YAML - Drop unrelated consumer nodes from binding examples to reduce bloat - Correct indentation and style in various DTS examples" * tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits) mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers mfd: maxim: Correct Samsung "Electronics" spelling in headers mfd: sm501: Remove unused sm501_find_clock mfd: 88pm886: Constify struct regmap_irq_chip and some other structures dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind mfd: rt5033: Fix wakeup source leaks on device unbind mfd: max8925: Fix wakeup source leaks on device unbind mfd: max77705: Fix wakeup source leaks on device unbind mfd: max77541: Fix wakeup source leaks on device unbind mfd: max14577: Fix wakeup source leaks on device unbind mfd: as3722: Fix wakeup source leaks on device unbind mfd: 88pm886: Fix wakeup source leaks on device unbind dt-bindings: mfd: Correct indentation and style in DTS example dt-bindings: mfd: Drop unrelated nodes from DTS example dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE dt-bindings: mfd: syscon: Add mt7988-topmisc mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe() ...	2025-06-03 11:53:55 -07:00
Linus Torvalds	efe19d34f6	Merge tag 'ata-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux ... Pull ata updates from Damien Le Moal: - Simplify ata_print_version_once() using dev_dbg_once() (Heiner) - Some cleanups of libata-sata code to simplify the sense data fetching code and use BIT() macro for tag bit handling (Niklas) - Fix variable name spelling in the sata_sx4 driver (Colin) - Improve sense data information field handling for passthrough commands (Igor) - Add Rockchip RK3576 SoC compatible to the Designware AHCI DT bindings (Nicolas) - Add a message to indicate if a port is marked as external or not, to help with debugging potential issues with LPM (Niklas) - Convert DT bindings for "ti,dm816-ahci", "apm,xgene-ahci", "cavium,ebt3000-compact-flash", "marvell,orion-sata", and "arasan,cf-spear1340" to DT schema (Rob) - Cleanup and improve the code and related comments for HIPM and DIPM (host initiated and device initiated power managent) handling. In particular, keep DIPM disabled while modifying the allowed LPM states to avoid races with the device initiating power state changes (Niklas) * tag 'ata-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libata-eh: Keep DIPM disabled while modifying the allowed LPM states ata: libata-eh: Rename no_dipm variable to be more clear ata: libata-eh: Rename hipm and dipm variables ata: libata-eh: Add ata_eh_set_lpm() WARN_ON_ONCE ata: libata-eh: Update DIPM comments to reflect reality dt-bindings: ata: Convert arasan,cf-spear1340 to DT schema dt-bindings: ata: Convert marvell,orion-sata to DT schema dt-bindings: ata: Convert cavium,ebt3000-compact-flash to DT schema dt-bindings: ata: Convert apm,xgene-ahci to DT schema dt-bindings: ata: Convert st,ahci to DT schema dt-bindings: ata: Convert ti,dm816-ahci to DT schema ata: libata: Print if port is external on boot dt-bindings: ata: rockchip-dwc-ahci: add RK3576 compatible ata: libata-scsi: Do not set the INFORMATION field twice for ATA PT ata: sata_sx4: Fix spelling mistake "parttern" -> "pattern" ata: libata-sata: Use BIT() macro to convert tag to bit field ata: libata-sata: Simplify sense_valid fetching ata: libata-core: Simplify ata_print_version_once	2025-06-03 09:42:38 -07:00
Linus Torvalds	76c21d2254	Merge tag 'hwmon-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging ... Pull hwmon updates from Guenter Roeck: "New drivers: - KEBA fan controller - KEBA battery monitoring controller - MAX77705 Support added to existing drivers: - MAXIMUS VI HERO and ROG MAXIMUS Z90 Formula support (asus-ec-sensors) - SQ52206 support (ina238) - lt3074 support (pmbus/lt3074) - ADPM12160 support (pmbus/max34440) - MPM82504 and for MPM3695 family support (pmbus/mpq8785) - Add the Dell OptiPlex 7050 to the DMI whitelist (dell-smm) - Zen5 Ryzen Desktop support (k10temp) Various other minor fixes and improvements" * tag 'hwmon-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits) doc: hwmon: acpi_power_meter: Add information about enabling the power capping feature. hwmon: (isl28022) Fix current reading calculation hwmon: (lm75) Fix I3C transfer buffer pointer for incoming data hwmon: Add KEBA fan controller support hwmon: pmbus: mpq8785: Add support for MPM3695 family hwmon: pmbus: mpq8785: Add support for MPM82504 hwmon: pmbus: mpq8785: Implement VOUT feedback resistor divider ratio configuration hwmon: pmbus: mpq8785: Prepare driver for multiple device support dt-bindings: hwmon: Add bindings for mpq8785 driver hwmon: (ina238) Modify the calculation formula to adapt to different chips hwmon: (ina238) Add support for SQ52206 dt-bindings: Add SQ52206 to ina2xx devicetree bindings hwmon: (ina238) Add ina238_config to save configurations for different chips hwmon: (ausus-ec-sensors) add MAXIMUS VI HERO. hwmon: (isl28022, nct7363) Convert to use maple tree register cache hwmon: (asus-ec-sensors) check sensor index in read_string() hwmon: (asus-ec-sensors) add ROG MAXIMUS Z90 Formula. dt-bindings: hwmon: Add Sophgo SG2044 external hardware monitor support hwmon: (max77705) Add initial support hwmon: (tmp102) add vcc regulator support ...	2025-06-03 09:11:26 -07:00
Linus Torvalds	c00b285024	Merge tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux ... Pull hyperv updates from Wei Liu: - Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel) - Fixes for Hyper-V UIO driver (Long Li) - Fixes for Hyper-V PCI driver (Michael Kelley) - Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley) - Documentation updates for Hyper-V VMBus (Michael Kelley) - Enhance logging for hv_kvp_daemon (Shradha Gupta) * tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits) Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir Documentation: hyperv: Update VMBus doc with new features and info PCI: hv: Remove unnecessary flex array in struct pci_packet Drivers: hv: Remove hv_alloc/free_* helpers Drivers: hv: Use kzalloc for panic page allocation uio_hv_generic: Align ring size to system page uio_hv_generic: Use correct size for interrupt and monitor pages Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary arch/x86: Provide the CPU number in the wakeup AP callback x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap() PCI: hv: Get vPCI MSI IRQ domain from DeviceTree ACPI: irq: Introduce acpi_get_gsi_dispatcher() Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device() Drivers: hv: vmbus: Get the IRQ number from DeviceTree dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties arm64, x86: hyperv: Report the VTL the system boots in arm64: hyperv: Initialize the Virtual Trust Level field Drivers: hv: Provide arch-neutral implementation of get_vtl() Drivers: hv: Enable VTL mode for arm64 ...	2025-06-03 08:39:20 -07:00
Linus Torvalds	d00a83477e	Merge tag 'input-for-v6.16-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input ... Pull input updates from Dmitry Torokhov: - support for game controllers requiring delayed initialization packets, such as ByoWave Proteus, in xpad driver - a change to atkbd driver to not reset the keyboard on Loongson devices - tweaks to gpio-keys and matrix_keypad drivers - fixes to documentation for Amiga joysticks - a fix to ims-pcu driver to better handle malformed firmware * tag 'input-for-v6.16-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ims-pcu - check record size in ims_pcu_flash_firmware() Input: gpio-keys - fix possible concurrent access in gpio_keys_irq_timer() Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT Input: amijoy - make headings compliant w/ guidelines in documentation Input: amijoy - fix grammar in documentation Input: amijoy - fix Amiga 4-joystick adapter pinout in documentation Input: amijoy - fix broken table formatting in documentation Input: atkbd - do not reset keyboard by default on Loongson Input: xpad - send LED and auth done packets to all Xbox One controllers Input: xpad - add the ByoWave Proteus controller Input: xpad - allow delaying init packets MAINTAINERS: update dlg,da72??.txt to yaml dt-bindings: input: convert dlg,da7280.txt to dt-schema dt-bindings: input: touchscreen: edt-ft5x06: use unevaluatedProperties Input: snvs_pwrkey - support power-off-time-sec dt-bindings: crypto: fsl,sec-v4.0-mon: Add "power-off-time-sec" Input: matrix_keypad - detect change during scan Input: matrix_keypad - add function for reading row state	2025-06-02 11:14:21 -07:00
Linus Torvalds	4c3b7df784	Merge tag 'mtd/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux ... Pull MTD updates from Miquel Raynal: "A big core MTD change is the introduction of a new class to always register a master device. This is a problem that has been there forever: the "master" device was not always present depending on a number of heuristics such as the presence of fixed partitions and the absence of a Kconfig symbol to force its presence. This was a problem for runtime PM operations which might not have the "master" device available in all situation. The SPI NAND subsystem has seen the introduction of DTR operations (the equivalent of DDR transfers), which involved quite a few preparation patches for clarifying macro names. In the raw NAND subsystem, the brcmnand driver has been "fixed" for old legacy SoCs with an update of the ->exec_op() hook, there has been the introduction of a new controller driver named Loongson-1, and the Qualcomm driver has received quite a few misc fixes as well as a new compatible. Finally, Macornix SPI NOR entries have been cleaned-up and some SFDP table fixups for Macronix MX25L3255E have been merged. Aside from this, there is the usual load of misc improvement, fixes, and yaml conversion" * tag 'mtd/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (42 commits) mtd: rawnand: brcmnand: legacy exec_op implementation mtd: rawnand: sunxi: Add randomizer configuration in sunxi_nfc_hw_ecc_write_chunk mtd: nand: brcmnand: fix NAND timeout when accessing eMMC mtd: nand: sunxi: Add randomizer configuration before randomizer enable mtd: spinand: esmt: fix id code for F50D1G41LB mtd: rawnand: brcmnand: remove unused parameters mtd: core: always create master device mtd: rawnand: loongson1: Fix inconsistent refcounting in ls1x_nand_chip_init() mtd: rawnand: loongson1: Fix error code in ls1x_nand_dma_transfer() mtd: rawnand: qcom: Fix read len for onfi param page mtd: rawnand: qcom: Fix last codeword read in qcom_param_page_type_exec() mtd: rawnand: qcom: Pass 18 bit offset from NANDc base to BAM base dt-bindings: mtd: qcom,nandc: Document the SDX75 NAND controller mtd: bcm47xxnflash: Add error handling for bcm47xxnflash_ops_bcm4706_ctl_cmd() mtd: rawnand: Use non-hybrid PCI devres API mtd: nand: ecc-mxic: Fix use of uninitialized variable ret mtd: spinand: winbond: Add support for W35N02JW and W35N04JW chips mtd: spinand: winbond: Add octal support mtd: spinand: winbond: Add support for W35N01JW in single mode mtd: spinand: winbond: Rename DTR variants ...	2025-06-02 11:08:17 -07:00
Linus Torvalds	dcf9ee9ac4	Merge tag 'rproc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux ... Pull remoteproc updates from Bjorn Andersson: - Fix resource cleanup in the remoteproc attach error handling code paths - Refactor the various TI K3 drivers to extract and reuse common code between them - Add support in the i.MX remoteproc driver for determining from the firmware if Linux should wait on a "firmware ready" signal at startup - Improve the Xilinx R5F power down mechanism to handle use cases where this is shared with other entities in the system * tag 'rproc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (46 commits) remoteproc: k3: Refactor release_tsp() functions into common driver remoteproc: k3: Refactor reserved_mem_init() functions into common driver remoteproc: k3: Refactor mem_release() functions into common driver remoteproc: k3: Refactor of_get_memories() functions into common driver remoteproc: k3: Refactor .da_to_va rproc ops into common driver remoteproc: k3: Refactor .get_loaded_rsc_table ops into common driver remoteproc: k3: Refactor .detach rproc ops into common driver remoteproc: k3: Refactor .attach rproc ops into common driver remoteproc: k3: Refactor .stop rproc ops into common driver remoteproc: k3: Refactor .start rproc ops into common driver remoteproc: k3: Refactor .unprepare rproc ops into common driver remoteproc: k3: Refactor .prepare rproc ops into common driver remoteproc: k3-dsp: Assert local reset during .prepare callback remoteproc: k3-dsp: Don't override rproc ops in IPC-only mode remoteproc: k3: Refactor rproc_request_mbox() implementations into common driver remoteproc: k3-m4: Ping the mbox while acquiring the channel remoteproc: k3: Refactor rproc_release() implementation into common driver remoteproc: k3-m4: Introduce central function to release rproc from reset remoteproc: k3-dsp: Correct Reset deassert logic for devices w/o lresets remoteproc: k3: Refactor rproc_reset() implementation into common driver ...	2025-06-02 11:04:29 -07:00
Linus Torvalds	a060795111	Merge tag 'mailbox-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox ... Pull mailbox updates from Jassi Brar: "Core: - misc cleanup sophgo: - add driver for CV18XX series qcom: - add SM7150 APCS compatible - apcs: added separate clock node imx: - fix tx doorbell send microchip: - misc compile option fix mediatek: - Refine GCE_GCTL_VALUE setting" * tag 'mailbox-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: mailbox: qcom-apcs-ipc: Assign OF node to clock controller child device dt-bindings: mailbox: qcom,apcs: Add separate node for clock-controller dt-bindings: mailbox: qcom: Add the SM7150 APCS compatible mailbox: sophgo: add mailbox driver for CV18XX series SoC dt-bindings: mailbox: add Sophgo CV18XX series SoC mailbox: Use guard/scoped_guard for spinlock mailbox: Use guard/scoped_guard for con_mutex mailbox: Remove devm_mbox_controller_unregister mailbox: Propagate correct error return value mailbox: Not protect module_put with spin_lock_irqsave mailbox: Use dev_err when there is error mailbox: mtk-cmdq: Refine GCE_GCTL_VALUE setting mailbox: imx: Fix TXDB_V2 sending mailbox: mchp-ipc-sbi: Fix COMPILE_TEST build error	2025-06-02 10:58:00 -07:00
Miquel Raynal	aa70292325	Merge tag 'nand/for-6.16' into mtd/next ... The SPI NAND subsystem has seen the introduction of DTR operations (the equivalent of DDR transfers), which involved quite a few preparation patches for clarifying macro names. In the raw NAND subsystem, the brcmnand driver has been "fixed" for old legacy SoCs with an update of the ->exec_op() hook, there has been the introduction of a new controller driver named Loongson-1, and the Qualcomm driver has received quite a few misc fixes as well as a new compatible. Aside from this, there is the usual load of misc improvement and fixes.	2025-06-02 18:39:50 +02:00
Wolfram Sang	ae95a7e321	dt-bindings: rtc: rzn1: add optional second clock ... The external crystal can be a second clock input. It is needed for the SCMP counting method which allows using crystals different than 32768Hz. It is also needed for an upcoming SoC which only supports the SCMP method. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250526095801.35781-6-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>	2025-06-01 23:53:02 +02:00
Linus Torvalds	bb1556ec94	Merge tag 'linux-watchdog-6.16-rc1' of git://www.linux-watchdog.org/linux-watchdog ... Pull watchdog updates from Wim Van Sebroeck: - Add watchdog timer for the NXP S32 platform - Add driver for Intel OC WDT - Add exynos990-wdt - Various other fixes and improvements * tag 'linux-watchdog-6.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: iTCO_wdt: Update the heartbeat value after clamping timeout watchdog: Add driver for Intel OC WDT watchdog: arm_smc_wdt: get wdt status through SMCWD_GET_TIMELEFT watchdog: iTCO: Drop driver-internal locking watchdog: apple: set max_hw_heartbeat_ms instead of max_timeout watchdog: qcom: introduce the device data for IPQ5424 watchdog device dt-bindings: watchdog: renesas,wdt: Document RZ/V2N (R9A09G056) support watchdog: lenovo_se30_wdt: Fix possible devm_ioremap() NULL pointer dereference in lenovo_se30_wdt_probe() watchdog: s3c2410_wdt: Add exynos990-wdt compatible data dt-bindings: watchdog: samsung-wdt: Add exynos990-wdt compatible dt-bindings: watchdog: Add rk3562 compatible dt-bindings: watchdog: fsl,scu-wdt: Document imx8qm watchdog: Add the Watchdog Timer for the NXP S32 platform dt-bindings: watchdog: Add NXP Software Watchdog Timer watchdog: Correct kerneldoc warnings watchdog: stm32: Fix wakeup source leaks on device unbind watchdog: Do not enable by default during compile testing watchdog: cros-ec: Avoid -Wflex-array-member-not-at-end warning watchdog: da9052_wdt: respect TWDMIN watchdog: da9052_wdt: do not disable wdt during probe ...	2025-06-01 09:01:58 -07:00
Linus Torvalds	a2604f8d43	Merge tag 'i3c/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux ... Pull i3c updates from Alexandre Belloni: "There is not much this this, mostly fixes around interrupt and IBI handling: - mipi-i3c-hci: interrupt handling fixes - svc: i.MX94 and i.MX95 support, IBI handling fixes" * tag 'i3c/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: controllers do not need to depend on I3C i3c: master: svc: switch to bulk clk API for flexible clock support dt-bindings: i3c: silvaco,i3c-master: add i.MX94 and i.MX95 I3C i3c: master: svc: skip address resend on repeat START i3c: master: svc: Emit STOP asap in the IBI transaction i3c: master: svc: Receive IBI requests in interrupt context i3c: mipi-i3c-hci: Move unexpected INTR_STATUS print before IO handler i3c: mipi-i3c-hci: Change name of INTR_STATUS bit 11 i3c: mipi-i3c-hci: Clear INTR_STATUS unconditionally i3c: mipi-i3c-hci: Fix handling status of i3c_hci_irq_handler() i3c: mipi-i3c-hci: Allow only relevant INTR_STATUS bit updates	2025-06-01 08:59:50 -07:00
Linus Torvalds	82dad69806	Merge tag 'for-linus' of https://github.com/openrisc/linux ... Pull OpenRISC updates from Stafford Horne: "Just a few documentation updates from the community: - Device tree documentation conversion from txt to yaml - Documentation addition to help users getting started with initramfs on OpenRISC * tag 'for-linus' of https://github.com/openrisc/linux: dt-bindings: interrupt-controller: Convert openrisc,ompic to DT schema dt-bindings: interrupt-controller: Convert opencores,or1k-pic to DT schema Documentation:openrisc: Add build instructions with initramfs	2025-06-01 08:56:34 -07:00
Lad Prabhakar	f55937e42c	dt-bindings: watchdog: renesas,wdt: Document RZ/V2N (R9A09G056) support ... Document support for the watchdog IP found on the Renesas RZ/V2N (R9A09G056) SoC. The watchdog IP is identical to that on RZ/V2H(P), so `renesas,r9a09g057-wdt` will be used as a fallback compatible, enabling reuse of the existing driver without changes. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250502120054.47323-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>	2025-06-01 13:16:12 +02:00
Igor Belwon	a2170f8493	dt-bindings: watchdog: samsung-wdt: Add exynos990-wdt compatible ... Add a dt-binding compatible for the Exynos990 Watchdog timer. This watchdog is compatible with the GS101/Exynos850 design, as such it requires the cluster-index and syscon-phandle properties to be present. It also contains a cl2 cluster, as such the cluster-index property has been expanded. Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250420-wdt-resends-april-v1-1-f58639673959@mentallysanemainliners.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>	2025-06-01 13:15:59 +02:00
Linus Torvalds	7d4e49a77d	Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm ... Pull non-MM updates from Andrew Morton: - "hung_task: extend blocking task stacktrace dump to semaphore" from Lance Yang enhances the hung task detector. The detector presently dumps the blocking tasks's stack when it is blocked on a mutex. Lance's series extends this to semaphores - "nilfs2: improve sanity checks in dirty state propagation" from Wentao Liang addresses a couple of minor flaws in nilfs2 - "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn fixes a couple of issues in the gdb scripts - "Support kdump with LUKS encryption by reusing LUKS volume keys" from Coiby Xu addresses a usability problem with kdump. When the dump device is LUKS-encrypted, the kdump kernel may not have the keys to the encrypted filesystem. A full writeup of this is in the series [0/N] cover letter - "sysfs: add counters for lockups and stalls" from Max Kellermann adds /sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count - "fork: Page operation cleanups in the fork code" from Pasha Tatashin implements a number of code cleanups in fork.c - "scripts/gdb/symbols: determine KASLR offset on s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in the gdb scripts * tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits) llist: make llist_add_batch() a static inline delayacct: remove redundant code and adjust indentation squashfs: add optional full compressed block caching crash_dump, nvme: select CONFIGFS_FS as built-in scripts/gdb/symbols: determine KASLR offset on s390 during early boot scripts/gdb/symbols: factor out pagination_off() scripts/gdb/symbols: factor out get_vmlinux() kernel/panic.c: format kernel-doc comments mailmap: update and consolidate Casey Connolly's name and email nilfs2: remove wbc->for_reclaim handling fork: define a local GFP_VMAP_STACK fork: check charging success before zeroing stack fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code fork: clean-up ifdef logic around stack allocation kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count x86/crash: make the page that stores the dm crypt keys inaccessible x86/crash: pass dm crypt keys to kdump kernel Revert "x86/mm: Remove unused __set_memory_prot()" crash_dump: retrieve dm crypt keys in kdump kernel ...	2025-05-31 19:12:53 -07:00
Linus Torvalds	31848987f1	Merge tag 'soc-newsoc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc ... Pull sophgo SoC devicetree updates from Arnd Bergmann: "The Sophgo SG2044 SoC is their second generation server chip with 64 cores, following the SG2042. In addition, there are minor updates for the cv180x SoCs" * tag 'soc-newsoc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: riscv: dts: sophgo: switch precise compatible for existed clock device for CV18XX riscv: dts: sophgo: Add initial device tree of Sophgo SRD3-10 dt-bindings: riscv: sophgo: Add SG2044 compatible string dt-bindings: interrupt-controller: Add Sophgo SG2044 PLIC dt-bindings: interrupt-controller: Add Sophgo SG2044 CLINT mswi riscv: dts: sopgho: use SOC_PERIPHERAL_IRQ to calculate interrupt number riscv: dts: sophgo: rename header file cv18xx.dtsi to cv180x.dtsi riscv: dts: sophgo: Move riscv cpu definition to a separate file riscv: dts: sophgo: Move all soc specific device into soc dtsi file riscv: sophgo: dts: Add spi controller for SG2042 riscv: dts: sophgo: sg2042: add pinctrl support	2025-05-31 08:14:37 -07:00
Linus Torvalds	ec71f661a5	Merge tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc ... Pull SoC devicetree updates from Arnd Bergmann: "There are 11 newly supported SoCs, but these are all either new variants of existing designs, or straight reuses of the existing chip in a new package: - RK3562 is a new chip based on the old Cortex-A53 core, apparently a low-cost version of the Cortex-A55 based RK3568/RK3566. - NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different set of on-chip peripherals. - Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2 family - Amlogic S6/S7/S7D - Samsung Exynos7870 is an older chip similar to Exynos7885 - WonderMedia wm8950 is a minor variation on the wm8850 chip - Amlogic s805y is almost idential to s805x - Allwinner A523 is similar to A527 and T527 - Qualcomm MSM8926 is a variant of MSM8226 - Qualcomm Snapdragon X1P42100 is related to R1E80100 There are also 65 boards, including reference designs for the chips above, this includes - 12 new boards based on TI K3 series chips, most of them from Toradex - 10 devices using Rockchips RK35xx and PX30 chips - 2 phones and 2 laptops based on Qualcomm Snapdragon designs - 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses - 3 Samsung Galaxy phones based on Exynos7870 - 5 Allwinner based boards using a variety of ARMv8 chips - 9 32-bit machines, each based on a different SoC family Aside from the new hardware, there is the usual set of cleanups and newly added hardware support on existing machines, for a total of 965 devicetree changesets" * tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits) MAINTAINERS, mailmap: update Sven Peter's email address arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency arm64: dts: nuvoton: Add pinctrl ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings arm64: dts: blaize-blzp1600: Enable GPIO support dt-bindings: clock: socfpga: convert to yaml arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3562 pcie unit addresses arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3576 pcie unit addresses arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588 arm64: dts: rockchip: Add missing SFC power-domains to rk3576 Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0" arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes arm64: dts: mt6359: Rename RTC node to match binding expectations arm64: dts: mt8365-evk: Add goodix touchscreen support arm64: dts: mediatek: mt8188: Add missing #reset-cells property arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board ...	2025-05-31 08:08:56 -07:00
Linus Torvalds	297d9111e9	Merge tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc ... Pull SoC driver updates from Arnd Bergmann: "Updates are across the usual driver subsystems with SoC specific drivers: - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm sm8750, and amlogic c3 and s4 chips. - cache controller updates for sifive chips, plus binding changes for other cache descriptions. - memory controller drivers for mediatek mt6893, stm32 and cleanups for a few more drivers - reset controller drivers for T-Head TH1502, Sophgo sg2044 and Renesas RZ/V2H(P) - SCMI firmware updates to better deal with buggy firmware, plus better support for Qualcomm X1E and NXP i.MX specific interfaces - a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX - cleanups for the TEE firmware subsystem and amdtee driver - minor updates and fixes for freescale/nxp, qualcomm, google, aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung SoCs" * tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits) soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() soc: aspeed: lpc: Fix impossible judgment condition ARM: aspeed: Don't select SRAM docs: firmware: qcom_scm: Fix kernel-doc warning soc: fsl: qe: Consolidate chained IRQ handler install/remove firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018 dt-bindings: cache: add QiLai compatible to ax45mp memory: stm32_omm: Fix error handling in stm32_omm_disable_child() dt-bindings: cache: Convert marvell,tauros2-cache to DT schema dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema soc: samsung: exynos-pmu: enable CPU hotplug support for gs101 MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation bus: fsl-mc: Use strscpy() instead of strscpy_pad() soc: fsl: qbman: Remove const from portal->cgrs allocation type bus: fsl_mc: Fix driver_managed_dma check bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value bus: fsl-mc: drop useless cleanup ...	2025-05-31 07:53:30 -07:00
Linus Torvalds	8477ab1430	Merge tag 'iommu-updates-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux ... Pull iommu updates from Joerg Roedel: "Core: - Introduction of iommu-pages infrastructure to consolitate page-table allocation code among hardware drivers. This is ground-work for more generalization in the future - Remove IOMMU_DEV_FEAT_SVA and IOMMU_DEV_FEAT_IOPF feature flags - Convert virtio-iommu to domain_alloc_paging() - KConfig cleanups - Some small fixes for possible overflows and race conditions Intel VT-d driver: - Restore WO permissions on second-level paging entries - Use ida to manage domain id - Miscellaneous cleanups AMD-Vi: - Make sure notifiers finish running before module unload - Add support for HTRangeIgnore feature - Allow matching ACPI HID devices without matching UIDs ARM-SMMU: - SMMUv2: - Recognise the compatible string for SAR2130P MDSS in the Qualcomm driver, as this device requires an identity domain - Fix Adreno stall handling so that GPU debugging is more robust and doesn't e.g. result in deadlock - SMMUv3: - Fix ->attach_dev() error reporting for unrecognised domains - IO-pgtable: - Allow clients (notably, drivers that process requests from userspace) to silence warnings when mapping an already-mapped IOVA S390: - Add support for additional table regions Mediatek: - Add support for MT6893 MM IOMMU And some smaller fixes and improvements in various other drivers" * tag 'iommu-updates-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (75 commits) iommu/vt-d: Restore context entry setup order for aliased devices iommu/mediatek: Fix compatible typo for mediatek,mt6893-iommu-mm iommu/arm-smmu-qcom: Make set_stall work when the device is on iommu/arm-smmu: Move handing of RESUME to the context fault handler iommu/arm-smmu-qcom: Enable threaded IRQ for Adreno SMMUv2/MMU500 iommu/io-pgtable-arm: Add quirk to quiet WARN_ON() iommu: Clear the freelist after iommu_put_pages_list() iommu/vt-d: Change dmar_ats_supported() to return boolean iommu/vt-d: Eliminate pci_physfn() in dmar_find_matched_satc_unit() iommu/vt-d: Replace spin_lock with mutex to protect domain ida iommu/vt-d: Use ida to manage domain id iommu/vt-d: Restore WO permissions on second-level paging entries iommu/amd: Allow matching ACPI HID devices without matching UIDs iommu: make inclusion of arm/arm-smmu-v3 directory conditional iommu: make inclusion of riscv directory conditional iommu: make inclusion of amd directory conditional iommu: make inclusion of intel directory conditional iommu: remove duplicate selection of DMAR_TABLE iommu/fsl_pamu: remove trailing space after \n iommu/arm-smmu-qcom: Add SAR2130P MDSS compatible ...	2025-05-30 10:44:20 -07:00
Linus Torvalds	883e3c9f40	Merge tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux ... Pull i2c updates from Wolfram Sang: "Core updates: - move towards using the 'fwnode' handle instead of 'of_node' (meaning 'of_node' even gets removed from i2c_board_info) - add support for Write Disable-aware SPD eeproms - minor stuff (use new helpers, typo fixes) i2c-atr (address translator) updates: - support per-channel alias pools - added support for dynamic address translation (also adds FPC202 driver as its user) - add 'static' and 'passthrough' flags Cleanups and refactorings - Many drivers switched to dev_err_probe() - Generic cleanups applied to designware, iproc, ismt, mlxbf, npcm7xx, qcom-geni, pasemi, and thunderx - davinci: declare I2C mangling support among I2C features - designware: clean up DTS handling - designware: fix PM runtime on driver unregister - imx: improve error logging during probe - lpc2k: improve checks in probe error path - xgene-slimpro: improve PCC shared memory handling - pasemi: improve error handling in reset, smbus clear, timeouts - tegra: validate buffer length during transfers - wmt: convert binding to YAML format Improvements and extended support: - microchip-core: add SMBus support - mlxbf: add support for repeated start in block transfers - mlxbf: improve timer configuration - npcm: attempt clock toggle recovery before failing init - octeon: add support for block mode operations - pasemi: add support for unjam device feature - riic: add support for bus recovery New device support: - MediaTek Dimensity 1200 (MT6893) - Sophgo SG2044 - Renesas RZ/V2N (R9A09G056) - Rockchip RK3528 - AMD ISP (new driver)" * tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits) i2c: Use str_read_write() helper i2c: mlxbf: avoid 64-bit division i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function i2c: designware: Don't warn about missing get_clk_rate_khz i2c: designware: Invoke runtime suspend on quick slave re-registration i2c-mlxbf: Improve I2C bus timing configuration i2c-mlxbf: Add repeated start condition support i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function dt-bindings: i2c: i2c-wmt: Convert to YAML i2c: microchip-corei2c: add smbus support i2c: mlxbf: Allow build with COMPILE_TEST i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP i2c: atr: add passthrough flag i2c: atr: add static flag i2c: atr: allow replacing mappings in attach_addr() i2c: atr: deduplicate logic in attach_addr() i2c: atr: do not create mapping in detach_addr() i2c: atr: split up i2c_atr_get_mapping_by_addr() i2c: atr: find_mapping() -> get_mapping() i2c: atr: Fix lockdep for nested ATRs ...	2025-05-30 10:07:53 -07:00
Linus Torvalds	eafd95ea74	Merge tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl ... Pull pin control updates from Linus Walleij: "An especially linear and sparse improvement and new drivers release. Nothing exciting. The biggest change in Bartosz changes to make gpiochip set/get calls return error codes (something we should have fixed ages ago but is now finally getting fixed.) Core changes: - Add the devres devm_pinctrl_register_mappings() call that can register some pin control machine mappings and have them go away with the associated device New drivers: - Support for the Mediatek MT6893 and MT8196 SoCs - Support for the Renesas RZ/V2N SoC - Support for the NXP Freescale i.MX943 SoC Improvements: - Per-SoC suspend/resume callbacks in the Samsung drivers - Set all pins as input (High-Z) at probe in the MCP23S08 driver - Switch most GPIO chips to use the setters/getters with a return value - EGPIO support in the Qualcomm QCM2290 driver - Fix up the number of available GPIO lines in Qualcomm QCS8300 and QCS615" * tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: freescale: Add support for imx943 pinctrl pinctrl: core: add devm_pinctrl_register_mappings() pinctrl: remove extern specifier for functions in machine.h pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms pinctrl: freescale: Enable driver if platform is enabled. pinctrl: freescale: Depend imx-scu driver on OF pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output() pinctrl: armada-37xx: set GPIO output value before setting direction pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31 pinctrl: meson: Drop unused aml_pctl_find_group_by_name() pinctrl: at91: Fix possible out-of-boundary access pinctrl: add stubs for OF-specific pinconf functions pinctrl: qcom: correct the ngpios entry for QCS8300 pinctrl: qcom: correct the ngpios entry for QCS615 dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300 dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615 ...	2025-05-30 09:46:28 -07:00
Linus Torvalds	9f32a03e3e	Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux ... Pull clk updates from Stephen Boyd: "This has been a semi-quiet cycle. The core framework remains unchanged this time around. In terms of shiny new code though, we have support for the SpacemiT K1 SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual silicon players like Qualcomm, Samsung, Allwinner, and Renesas. Surprisingly, the Qualcomm pile was smaller than usual but that is likely because they put one SoC support inside a driver for a different SoC that is very similar. Other than all those new clk drivers there are the usual clk data updates to fix parents, frequency tables, and add missing clks along with some Kconfig changes to make compile testing simpler and even more DT binding conversions to boot. The exciting part is still the new SoC support like SpacemiT and Sophgo support though, which really dominate the diffstat because they introduce a whole new silicon vendor clk driver. New Drivers: - Camera clock controller driver for Qualcomm QCS8300 - DE (display engine) 3.3 clocks on Allwinner H616 - Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers - Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC - Clock driver for Sophgo SG2044 - Clock driver for SpacemiT K1 SoC - Renesas RZ/V2N (R9A09G056) SoC clk driver Updates: - Correct data in various SoC clk drivers - Allow clkaN to be optional in the Qualcomm RPMh clock controller driver if command db doesn't define it - Change Kconfig options to not enable by default during compile testing - Add missing clks in various SoC clk drivers - Remove some duplicate clk DT bindings and convert some more to YAML" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits) clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750 clk: qcom: rpmh: make clkaN optional clk: qcom: Add support for Camera Clock Controller on QCS8300 clk: rockchip: rk3528: add slab.h header include clk: rockchip: rk3576: add missing slab.h include clk: meson: Do not enable by default during compile testing clk: meson-g12a: add missing fclk_div2 to spicc clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz clk: rockchip: rename gate-grf clk file clk: rockchip: rename branch_muxgrf to branch_grf_mux clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support dt-bindings: allwinner: add H616 DE33 clock binding clk: samsung: correct clock summary for hsi1 block dt-bindings: clock: add SM6350 QCOM video clock bindings clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks clk: sunxi-ng: h616: Add LVDS reset for LCD TCON dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset clk: rockchip: rk3036: mark ddrphy as critical clk: rockchip: rk3036: fix implementation of usb480m clock mux ...	2025-05-30 09:15:40 -07:00
Linus Torvalds	f66bc387ef	Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi ... Pull SCSI updates from James Bottomley: "Updates to the usual drivers (smartpqi, ufs, lpfc, scsi_debug, target, hisi_sas) with the only substantive core change being the removal of the stream_status member from the scsi_stream_status_header (to get rid of flex array members)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (77 commits) scsi: target: core: Constify struct target_opcode_descriptor scsi: target: core: Constify enabled() in struct target_opcode_descriptor scsi: hisi_sas: Fix warning detected by sparse scsi: mpt3sas: Fix _ctl_get_mpt_mctp_passthru_adapter() to return IOC pointer scsi: sg: Remove unnecessary NULL check before unregister_sysctl_table() scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort() scsi: ufs: qcom: dt-bindings: Document the SM8750 UFS Controller scsi: mvsas: Fix typos in SAS/SATA VSP register comments scsi: fnic: Replace memset() with eth_zero_addr() scsi: ufs: core: Support updating device command timeout scsi: ufs: core: Change hwq_id type and value scsi: ufs: core: Increase the UIC command timeout further scsi: zfcp: Simplify workqueue allocation scsi: ufs: core: Print error value as hex format in ufshcd_err_handler() scsi: sd: Remove the stream_status member from scsi_stream_status_header scsi: docs: Clean up some style in scsi_mid_low_api scsi: core: Remove unused scsi_dev_info_list_del_keyed() scsi: isci: Remove unused sci_remote_device_reset() scsi: scsi_debug: Reduce DEF_ATOMIC_WR_MAX_LENGTH scsi: smartpqi: Delete a stray tab in pqi_is_parity_write_stream() ...	2025-05-29 22:17:52 -07:00
Linus Torvalds	bf373e4c78	Merge tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux ... Pull devicetree updates from Rob Herring: "DT Bindings: - Convert all remaining interrupt-controller bindings to DT schema - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC PMC, imx-drm, and ftm-quaddec to DT schema - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te, maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard - Add top-level constraints for renesas,vsp1 and renesas,fcp - Add missing constraint in amlogic,pinctrl-a4 'group' nodes - Adjust the allowed properties for dwc3-xilinx, sony,imx219, pci-iommu, and renesas,dsi - Add EcoNet vendor prefix - Fix the reserved-memory.yaml in fsl,qman-fqd - Drop obsolete numa.txt and cpu-topology.txt which are schemas in dtschema now - Drop Renesas RZ/N1S bindings - Ensure Arm cpu nodes don't allow undocumented properties. Add all the properties which are in use and undocumented. Drop the Mediatek cpufreq binding which is not a binding, but just what DT properties the driver uses. - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU - Update documentation on defining child nodes with separate schemas - Add bindings to PSCI MAINTAINERS entry DT core: - Add new functions to simplify driver handling of 'memory-region' properties. Users to be added next cycle. - Simplify of_dma_set_restricted_buffer() to use of_for_each_phandle() - Add missing unlock on error in unittest_data_add()" * tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits) dt-bindings: timer: Add fsl,vf610-pit.yaml dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card dt-bindings: arm/cpus: Allow 2 power-domains entries dt-bindings: usb: dwc3-xilinx: allow dma-coherent media: dt-bindings: sony,imx219: Allow props from video-interface-devices dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller dt-bindings: trivial-devices: Add VZ89TE to trivial media: dt-bindings: renesas,vsp1: add top-level constraints media: dt-bindings: renesas,fcp: add top-level constraints dt-bindings: trivial-devices: Add Maxim max30208 dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema ...	2025-05-29 08:22:07 -07:00
Stephan Gerhold	c3c5138714	dt-bindings: mailbox: qcom,apcs: Add separate node for clock-controller ... APCS "global" is sort of a "miscellaneous" hardware block that combines multiple registers inside the application processor subsystem. Two distinct use cases are currently stuffed together in a single device tree node: - Mailbox: to communicate with other remoteprocs in the system. - Clock: for controlling the CPU frequency. These two use cases have unavoidable circular dependencies: the mailbox is needed as early as possible during boot to start controlling shared resources like clocks and power domains, while the clock controller needs one of these shared clocks as its parent. Currently, there is no way to distinguish these two use cases for generic mechanisms like fw_devlink. This is currently blocking conversion of the deprecated custom "qcom,ipc" properties to the standard "mboxes", see e.g. commit d92e9ea2f0 ("arm64: dts: qcom: msm8939: revert use of APCS mbox for RPM"): 1. remoteproc &rpm needs mboxes = <&apcs1_mbox 8>; 2. The clock controller inside &apcs1_mbox needs clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>. 3. &rpmcc is a child of remoteproc &rpm The mailbox itself does not need any clocks and should probe early to unblock the rest of the boot process. The "clocks" are only needed for the separate clock controller. In Linux, these are already two separate drivers that can probe independently. Break up the circular dependency chain in the device tree by separating the clock controller into a separate child node. Deprecate the old approach of specifying the clock properties as part of the root node, but keep them for backwards compatibility. Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>	2025-05-29 10:01:30 -05:00
Stephen Boyd	63bfd78aae	Merge branches 'clk-amlogic', 'clk-allwinner', 'clk-rockchip' and 'clk-qcom' into clk-next ... * clk-amlogic: clk: meson: Do not enable by default during compile testing clk: meson-g12a: add missing fclk_div2 to spicc * clk-allwinner: clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support dt-bindings: allwinner: add H616 DE33 clock binding clk: sunxi-ng: h616: Add LVDS reset for LCD TCON dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset clk: sunxi: Do not enable by default during compile testing clk: sunxi-ng: Do not enable by default during compile testing * clk-rockchip: clk: rockchip: rk3528: add slab.h header include clk: rockchip: rk3576: add missing slab.h include clk: rockchip: rename gate-grf clk file clk: rockchip: rename branch_muxgrf to branch_grf_mux clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks clk: rockchip: rk3036: mark ddrphy as critical clk: rockchip: rk3036: fix implementation of usb480m clock mux dt-bindings: clock: rk3036: add SCLK_USB480M clock-id clk: rockchip: rk3528: Add SD/SDIO tuning clocks in GRF region clk: rockchip: Support MMC clocks in GRF region dt-bindings: clock: Add GRF clock definition for RK3528 clk: rockchip: add GATE_GRFs for SAI MCLKOUT to rk3576 clk: rockchip: introduce GRF gates clk: rockchip: introduce auxiliary GRFs dt-bindings: clock: rk3576: add IOC gated clocks clk: rockchip: rk3568: Add PLL rate for 33.3MHz clk: rockchip: Drop empty init callback for rk3588 PLL type clk: rockchip: rk3588: Add PLL rate for 1500 MHz * clk-qcom: clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750 clk: qcom: rpmh: make clkaN optional clk: qcom: Add support for Camera Clock Controller on QCS8300 clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz dt-bindings: clock: add SM6350 QCOM video clock bindings clk: qcom: gpucc-sm6350: Add *_wait_val values for GDSCs clk: qcom: gcc-sm6350: Add *_wait_val values for GDSCs clk: qcom: dispcc-sm6350: Add *_wait_val values for GDSCs clk: qcom: camcc-sm6350: Add *_wait_val values for GDSCs clk: qcom: Fix missing error check for dev_pm_domain_attach()	2025-05-29 00:30:39 -07:00
Stephen Boyd	3e515fc860	Merge branches 'clk-socfpga', 'clk-sophgo', 'clk-thead' and 'clk-samsung' into clk-next ... * clk-socfpga: clk: socfpga: stratix10: Optimize local variables clk: socfpga: clk-pll: Optimize local variables * clk-sophgo: clk: sophgo: Add clock controller support for SG2044 SoC clk: sophgo: Add PLL clock controller support for SG2044 SoC dt-bindings: clock: sophgo: add clock controller for SG2044 dt-bindings: soc: sophgo: Add SG2044 top syscon device clk: sophgo: Add support for newly added precise compatible dt-bindings: clock: sophgo: Use precise compatible for CV1800 series SoC * clk-thead: clk: thead: Add clock support for VO subsystem in T-HEAD TH1520 SoC dt-bindings: clock: thead: Add TH1520 VO clock controller * clk-samsung: clk: samsung: correct clock summary for hsi1 block clk: samsung: exynosautov920: Fix incorrect CLKS_NR_CPUCL0 definition clk: samsung: exynosautov920: add cpucl1/2 clock support dt-bindings: clock: exynosautov920: add cpucl1/2 clock definitions clk: samsung: exynosautov920: add cpucl0 clock support dt-bindings: clock: exynosautov920: add cpucl0 clock definitions clk: samsung: Use samsung CCF common function	2025-05-29 00:30:28 -07:00
Stephen Boyd	7459da16c9	Merge branches 'clk-bindings', 'clk-renesas', 'clk-spacemit' and 'clk-cleanup' into clk-next ... * clk-bindings: dt-bindings: clock: Drop st,stm32h7-rcc.txt dt-bindings: clock: convert bcm2835-aux-clock to yaml dt-bindings: clock: Drop maxim,max77686.txt dt-bindings: clock: convert vf610-clock.txt to yaml format * clk-renesas: (26 commits) clk: renesas: r9a09g047: Add XSPI clock/reset clk: renesas: r9a09g047: Add support for xspi mux and divider dt-bindings: clock: renesas,r9a09g047-cpg: Add XSPI and GBETH PTP core clocks clk: renesas: Use str_on_off() helper clk: renesas: r9a09g057: Add clock and reset entries for USB2 dt-bindings: clock: renesas,r9a09g057-cpg: Add USB2 PHY and GBETH PTP core clocks clk: renesas: rzv2h: Use both CLK_ON and CLK_MON bits for clock state validation clk: renesas: rzv2h: Use str_on_off() helper in rzv2h_mod_clock_endisable() clk: renesas: rzv2h: Support static dividers without RMW clk: renesas: rzv2h: Add macro for defining static dividers clk: renesas: rzv2h: Add support for static mux clocks clk: renesas: r9a09g047: Add clock and reset entries for GE3D clk: renesas: rzv2h: Fix a typo clk: renesas: rzv2h: Add support for RZ/V2N SoC clk: renesas: rzv2h: Sort compatible list based on SoC part number dt-bindings: pinctrl: renesas: Document RZ/V2N SoC dt-bindings: clock: renesas: Document RZ/V2N SoC CPG dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK clk: renesas: rzv2h: Simplify rzv2h_cpg_assert()/rzv2h_cpg_deassert() ... * clk-spacemit: clk: spacemit: k1: Add TWSI8 bus and function clocks clk: spacemit: Add clock support for SpacemiT K1 SoC dt-bindings: clock: spacemit: Add spacemit,k1-pll dt-bindings: soc: spacemit: Add spacemit,k1-syscon * clk-cleanup: clk: test: Forward-declare struct of_phandle_args in kunit/clk.h clk: davinci: Use of_get_available_child_by_name() clk: bcm: rpi: Add NULL check in raspberrypi_clk_register() clk: bcm: rpi: Drop module alias clk: bcm: kona: Remove unused scaled_div_build	2025-05-29 00:30:17 -07:00
Linus Torvalds	1b98f357da	Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next ... Pull networking updates from Paolo Abeni: "Core: - Implement the Device Memory TCP transmit path, allowing zero-copy data transmission on top of TCP from e.g. GPU memory to the wire. - Move all the IPv6 routing tables management outside the RTNL scope, under its own lock and RCU. The route control path is now 3x times faster. - Convert queue related netlink ops to instance lock, reducing again the scope of the RTNL lock. This improves the control plane scalability. - Refactor the software crc32c implementation, removing unneeded abstraction layers and improving significantly the related micro-benchmarks. - Optimize the GRO engine for UDP-tunneled traffic, for a 10% performance improvement in related stream tests. - Cover more per-CPU storage with local nested BH locking; this is a prep work to remove the current per-CPU lock in local_bh_disable() on PREMPT_RT. - Introduce and use nlmsg_payload helper, combining buffer bounds verification with accessing payload carried by netlink messages. Netfilter: - Rewrite the procfs conntrack table implementation, improving considerably the dump performance. A lot of user-space tools still use this interface. - Implement support for wildcard netdevice in netdev basechain and flowtables. - Integrate conntrack information into nft trace infrastructure. - Export set count and backend name to userspace, for better introspection. BPF: - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops programs and can be controlled in similar way to traditional qdiscs using the "tc qdisc" command. - Refactor the UDP socket iterator, addressing long standing issues WRT duplicate hits or missed sockets. Protocols: - Improve TCP receive buffer auto-tuning and increase the default upper bound for the receive buffer; overall this improves the single flow maximum thoughput on 200Gbs link by over 60%. - Add AFS GSSAPI security class to AF_RXRPC; it provides transport security for connections to the AFS fileserver and VL server. - Improve TCP multipath routing, so that the sources address always matches the nexthop device. - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS, and thus preventing DoS caused by passing around problematic FDs. - Retire DCCP socket. DCCP only receives updates for bugs, and major distros disable it by default. Its removal allows for better organisation of TCP fields to reduce the number of cache lines hit in the fast path. - Extend TCP drop-reason support to cover PAWS checks. Driver API: - Reorganize PTP ioctl flag support to require an explicit opt-in for the drivers, avoiding the problem of drivers not rejecting new unsupported flags. - Converted several device drivers to timestamping APIs. - Introduce per-PHY ethtool dump helpers, improving the support for dump operations targeting PHYs. Tests and tooling: - Add support for classic netlink in user space C codegen, so that ynl-c can now read, create and modify links, routes addresses and qdisc layer configuration. - Add ynl sub-types for binary attributes, allowing ynl-c to output known struct instead of raw binary data, clarifying the classic netlink output. - Extend MPTCP selftests to improve the code-coverage. - Add tests for XDP tail adjustment in AF_XDP. New hardware / drivers: - OpenVPN virtual driver: offload OpenVPN data channels processing to the kernel-space, increasing the data transfer throughput WRT the user-space implementation. - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC. - Broadcom asp-v3.0 ethernet driver. - AMD Renoir ethernet device. - ReakTek MT9888 2.5G ethernet PHY driver. - Aeonsemi 10G C45 PHYs driver. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - refactor the steering table handling to significantly reduce the amount of memory used - add support for complex matches in H/W flow steering - improve flow streeing error handling - convert to netdev instance locking - Intel (100G, ice, igb, ixgbe, idpf): - ice: add switchdev support for LLDP traffic over VF - ixgbe: add firmware manipulation and regions devlink support - igb: introduce support for frame transmission premption - igb: adds persistent NAPI configuration - idpf: introduce RDMA support - idpf: add initial PTP support - Meta (fbnic): - extend hardware stats coverage - add devlink dev flash support - Broadcom (bnxt): - add support for RX-side device memory TCP - Wangxun (txgbe): - implement support for udp tunnel offload - complete PTP and SRIOV support for AML 25G/10G devices - Ethernet NICs embedded and virtual: - Google (gve): - add device memory TCP TX support - Amazon (ena): - support persistent per-NAPI config - Airoha: - add H/W support for L2 traffic offload - add per flow stats for flow offloading - RealTek (rtl8211): add support for WoL magic packet - Synopsys (stmmac): - dwmac-socfpga 1000BaseX support - add Loongson-2K3000 support - introduce support for hardware-accelerated VLAN stripping - Broadcom (bcmgenet): - expose more H/W stats - Freescale (enetc, dpaa2-eth): - enetc: add MAC filter, VLAN filter RSS and loopback support - dpaa2-eth: convert to H/W timestamping APIs - vxlan: convert FDB table to rhashtable, for better scalabilty - veth: apply qdisc backpressure on full ring to reduce TX drops - Ethernet switches: - Microchip (kzZ88x3): add ETS scheduler support - Ethernet PHYs: - RealTek (rtl8211): - add support for WoL magic packet - add support for PHY LEDs - CAN: - Adds RZ/G3E CANFD support to the rcar_canfd driver. - Preparatory work for CAN-XL support. - Add self-tests framework with support for CAN physical interfaces. - WiFi: - mac80211: - scan improvements with multi-link operation (MLO) - Qualcomm (ath12k): - enable AHB support for IPQ5332 - add monitor interface support to QCN9274 - add multi-link operation support to WCN7850 - add 802.11d scan offload support to WCN7850 - monitor mode for WCN7850, better 6 GHz regulatory - Qualcomm (ath11k): - restore hibernation support - MediaTek (mt76): - WiFi-7 improvements - implement support for mt7990 - Intel (iwlwifi): - enhanced multi-link single-radio (EMLSR) support on 5 GHz links - rework device configuration - RealTek (rtw88): - improve throughput for RTL8814AU - RealTek (rtw89): - add multi-link operation support - STA/P2P concurrency improvements - support different SAR configs by antenna - Bluetooth: - introduce HCI Driver protocol - btintel_pcie: do not generate coredump for diagnostic events - btusb: add HCI Drv commands for configuring altsetting - btusb: add RTL8851BE device 0x0bda:0xb850 - btusb: add new VID/PID 13d3/3584 for MT7922 - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925 - btnxpuart: implement host-wakeup feature" * tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits) selftests/bpf: Fix bpf selftest build warning selftests: netfilter: Fix skip of wildcard interface test net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames net: openvswitch: Fix the dead loop of MPLS parse calipso: Don't call calipso functions for AF_INET sk. selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem net_sched: hfsc: Address reentrant enqueue adding class to eltree twice octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback octeontx2-pf: QOS: Perform cache sync on send queue teardown net: mana: Add support for Multi Vports on Bare metal net: devmem: ncdevmem: remove unused variable net: devmem: ksft: upgrade rx test to send 1K data net: devmem: ksft: add 5 tuple FS support net: devmem: ksft: add exit_wait to make rx test pass net: devmem: ksft: add ipv4 support net: devmem: preserve sockc_err page_pool: fix ugly page_pool formatting net: devmem: move list_add to net_devmem_bind_dmabuf. selftests: netfilter: nft_queue.sh: include file transfer duration in log message net: phy: mscc: Fix memory leak when using one step timestamping ...	2025-05-28 15:24:36 -07:00
Linus Torvalds	b08494a8f7	Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel ... Pull drm updates from Dave Airlie: "As part of building up nova-core/nova-drm pieces we've brought in some rust abstractions through this tree, aux bus being the main one, with devres changes also in the driver-core tree. Along with the drm core abstractions and enough nova-core/nova-drm to use them. This is still all stub work under construction, to build the nova driver upstream. The other big NVIDIA related one is nouveau adds support for Hopper/Blackwell GPUs, this required a new GSP firmware update to 570.144, and a bunch of rework in order to support multiple fw interfaces. There is also the introduction of an asahi uapi header file as a precursor to getting the real driver in later, but to unblock userspace mesa packages while the driver is trapped behind rust enablement. Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe, and msm being the main ones, and some changes to vsprintf. new drivers: - bring in the asahi uapi header standalone - nova-drm: stub driver rust dependencies (for nova-core): - auxiliary - bus abstractions - driver registration - sample driver - devres changes from driver-core - revocable changes core: - add Apple fourcc modifiers - add virtio capset definitions - extend EXPORT_SYNC_FILE for timeline syncobjs - convert to devm_platform_ioremap_resource - refactor shmem helper page pinning - DP powerup/down link helpers - extended %p4cc in vsprintf.c to support fourcc prints - change vsprintf %p4cn to %p4chR, remove %p4cn - Add drm_file_err function - IN_FORMATS_ASYNC property - move sitronix from tiny to their own subdir rust: - add drm core infrastructure rust abstractions (device/driver, ioctl, file, gem) dma-buf: - adjust sg handling to not cache map on attach - allow setting dma-device for import - Add a helper to sort and deduplicate dma_fence arrays docs: - updated drm scheduler docs - fbdev todo update - fb rendering - actual brightness ttm: - fix delayed destroy resv object bridge: - add kunit tests - convert tc358775 to atomic - convert drivers to devm_drm_bridge_alloc - convert rk3066_hdmi to bridge driver scheduler: - add kunit tests panel: - refcount panels to improve lifetime handling - Powertip PH128800T004-ZZA01 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00 - Himax HX8279/HX8279-D DDIC - Visionox G2647FB105 - Sitronix ST7571 - ZOTAC rotation quirk vkms: - allow attaching more displays i915: - xe3lpd display updates - vrr refactor - intel_display struct conversions - xe2hpd memory type identification - add link rate/count to i915_display_info - cleanup VGA plane handling - refactor HDCP GSC - fix SLPC wait boosting reference counting - add 20ms delay to engine reset - fix fence release on early probe errors xe: - SRIOV updates - BMG PCI ID update - support separate firmware for each GT - SVM fix, prelim SVM multi-device work - export fan speed - temp disable d3cold on BMG - backup VRAM in PM notifier instead of suspend/freeze - update xe_ttm_access_memory to use GPU for non-visible access - fix guc_info debugfs for VFs - use copy_from_user instead of __copy_from_user - append PCIe gen5 limitations to xe_firmware document amdgpu: - DSC cleanup - DC Scaling updates - Fused I2C-over-AUX updates - DMUB updates - Use drm_file_err in amdgpu - Enforce isolation updates - Use new dma_fence helpers - USERQ fixes - Documentation updates - SR-IOV updates - RAS updates - PSP 12 cleanups - GC 9.5 updates - SMU 13.x updates - VCN / JPEG SR-IOV updates amdkfd: - Update error messages for SDMA - Userptr updates - XNACK fixes radeon: - CIK doorbell cleanup nouveau: - add support for NVIDIA r570 GSP firmware - enable Hopper/Blackwell support nova-core: - fix task list - register definition infrastructure - move firmware into own rust module - register auxiliary device for nova-drm nova-drm: - initial driver skeleton msm: - GPU: - ACD (adaptive clock distribution) for X1-85 - drop fictional address_space_size - improve GMU HFI response time out robustness - fix crash when throttling during boot - DPU: - use single CTL path for flushing on DPU 5.x+ - improve SSPP allocation code for better sharing - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550 - Added SAR2130P support - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660 - DP: - switch to new audio helpers - better LTTPR handling - DSI: - Added support for SA8775P - Added SAR2130P support - HDMI: - Switched to use new helpers for ACR data - Fixed old standing issue of HPD not working in some cases amdxdna: - add dma-buf support - allow empty command submits renesas: - add dma-buf support - add zpos, alpha, blend support panthor: - fail properly for NO_MMAP bos - add SET_LABEL ioctl - debugfs BO dumping support imagination: - update DT bindings - support TI AM68 GPU hibmc: - improve interrupt handling and HPD support virtio: - add panic handler support rockchip: - add RK3588 support - add DP AUX bus panel support ivpu: - add heartbeat based hangcheck mediatek: - prepares support for MT8195/99 HDMIv2/DDCv2 anx7625: - improve HPD tegra: - speed up firmware loading * tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits) drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr() drm/xe: Default auto_link_downgrade status to false drm/xe/guc: Make creation of SLPC debugfs files conditional drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue() drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read drm/i915/ptl: Use everywhere the correct DDI port clock select mask drm/nouveau/kms: add support for GB20x drm/dp: add option to disable zero sized address only transactions. drm/nouveau: add support for GB20x drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle drm/nouveau: add support for GB10x drm/nouveau/gf100-: track chan progress with non-WFI semaphore release drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos drm/nouveau: add support for GH100 drm/nouveau: improve handling of 64-bit BARs drm/nouveau/gv100-: switch to volta semaphore methods drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM ...	2025-05-28 09:46:39 -07:00
Linus Torvalds	a61e260381	Merge tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media ... Pull media updates from Mauro Carvalho Chehab: - v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output - New driver: Amlogic C3 ISP - New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10 - amlogic: c3-mipi-csi2: Handle 64-bits division - a fix for 64-bits division at the amlogic c3-mipi-csi2 driver - Changes at atomisp to support mainline mt9m114 driver and remove deprecated GPIO APIs - various cleanups, fixes and enhancements * tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits) media: rkvdec: h264: Support High 10 and 4:2:2 profiles media: rkvdec: Add get_image_fmt ops media: rkvdec: Initialize the m2m context before the controls media: rkvdec: h264: Limit minimum profile to constrained baseline media: mediatek: jpeg: support 34bits media: verisilicon: Free post processor buffers on error media: platform: mtk-mdp3: Remove unused mdp_get_plat_device media: amlogic: c3-mipi-csi2: Handle 64-bits division media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional media: uvcvideo: Fix deferred probing error media: uvcvideo: Rollback non processed entities on error media: uvcvideo: Send control events for partial succeeds media: uvcvideo: Return the number of processed controls media: uvcvideo: Do not turn on the camera for some ioctls media: uvcvideo: Make power management granular media: uvcvideo: Increase/decrease the PM counter per IOCTL media: uvcvideo: Create uvc_pm_(get|put) functions media: uvcvideo: Keep streaming state in the file handle Documentation: media: Add documentation file c3-isp.rst Documentation: media: Add documentation file metafmt-c3-isp.rst ...	2025-05-28 09:17:20 -07:00
Frank Li	89ab97de44	dt-bindings: timer: Add fsl,vf610-pit.yaml ... Add binding doc fsl,vf610-pit.yaml to fix below CHECK_DTB warnings: arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dtb: /soc/bus@40000000/pit@40037000: failed to match any schema with compatible: ['fsl,vf610-pit'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250522205710.502779-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>	2025-05-28 09:20:59 -05:00
Tommaso Merciai	b945781301	dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC ... Add a compatible string for the Renesas RZ/G3E SoC variants that include a Mali-G52 GPU. These variants share the same restrictions on interrupts, clocks, and power domains as the RZ/G2L SoC, so extend the existing schema validation accordingly. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> Link: https://lore.kernel.org/r/20250528073040.904033-1-tommaso.merciai.xr@bp.renesas.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>	2025-05-28 08:46:08 -05:00
Luca Weiss	05e6d2ff6b	ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card ... Document the bindings for the sound card on Fairphone 5 which uses the older non-audioreach audio architecture. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20250507-fp5-dp-sound-v4-1-4098e918a29e@fairphone.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>	2025-05-28 07:19:40 -05:00
Christian Marangi	fef1848809	dt-bindings: net: dsa: mediatek,mt7530: Add airoha,an7583-switch ... Add airoha,an7583-switch additional compatible to the mt7530 DSA Switch Family. This is an exact match of the airoha,en7581-switch (based on mt7988-switch) with the additional requirement of tweak on the GEPHY_CONN_CFG registers to make the internal PHY actually work. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20250522165313.6411-2-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2025-05-27 17:07:52 -07:00
Linus Torvalds	049294830b	Merge tag 'thermal-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm ... Pull thermal control updates from Rafael Wysocki: "These add support for a new feature, Platform Temperature Control (PTC), to the Intel int340x thermal driver, add support for the Airoha EN7581 thermal sensor and the IPQ5018 platform, fix up the ACPI thermal zones handling, fix other assorted issues and clean up code Specifics: - Add Platform Temperature Control (PTC) support to the Intel int340x thermal driver (Srinivas Pandruvada) - Make the Hisilicon thermal driver compile by default when ARCH_HISI is set (Krzysztof Kozlowski) - Clean up printk() format by using %pC instead of %pCn in the bcm2835 thermal driver (Luca Ceresoli) - Fix variable name coding style in the AmLogic thermal driver (Enrique Isidoro Vazquez Ramos) - Fix missing debugfs entry removal on failure by using the devm_ variant in the LVTS thermal driver (AngeloGioacchino Del Regno) - Remove the unused lvts_debugfs_exit() function as the devm_ variant introduced before takes care of removing the debugfs entry in the LVTS driver (Arnd Bergmann) - Add the Airoha EN7581 thermal sensor support along with its DT bindings (Christian Marangi) - Add ipq5018 compatible string DT binding, cleanup and add its suppot to the QCom Tsens thermal driver (Sricharan Ramabadhran, George Moussalem) - Fix comments typos in the Airoha driver (Christian Marangi, Colin Ian King) - Address a sparse warning by making a local variable static in the QCom thermal driver (George Moussalem) - Fix the usage of the _SCP control method in the driver for ACPI thermal zones (Armin Wolf)" * tag 'thermal-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: qcom: ipq5018: make ops_ipq5018 struct static thermal/drivers/airoha: Fix spelling mistake "calibrarion" -> "calibration" ACPI: thermal: Execute _SCP before reading trip points ACPI: OSI: Stop advertising support for "3.0 _SCP Extensions" thermal/drivers/airoha: Fix spelling mistake thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM thermal/drivers/qcom/tsens: Update conditions to strictly evaluate for IP v2+ dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible thermal/drivers: Add support for Airoha EN7581 thermal sensor dt-bindings: thermal: Add support for Airoha EN7581 thermal sensor thermal/drivers/mediatek/lvts: Remove unused lvts_debugfs_exit thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure thermal/drivers/amlogic: Rename Uptat to uptat to follow kernel coding style vsprintf: remove redundant and unused %pCn format specifier thermal/drivers/bcm2835: Use %pC instead of %pCn thermal/drivers/hisi: Do not enable by default during compile testing thermal: int340x: processor_thermal: Platform temperature control documentation thermal: intel: int340x: Enable platform temperature control thermal: intel: int340x: Add platform temperature control interface	2025-05-27 16:28:02 -07:00
Linus Torvalds	35a8b02e07	Merge tag 'mmc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc ... Pull MMC updates from Ulf Hansson: "MMC core: - Scan the eMMC boot areas for partition table - Clarify purpose of mmc_can* functions by renaming them to mmc_card_can* - Clarify helpers for host capabilities by renaming them to mmc_host_can* - Add support for graceful host removal for SD and eMMC - Further avoid re-storing power to the eMMC before a shutdown - Add quirk to disable DDR50 tuning and use it for some Swissbit SD-cards MMC host: - mtk-sd: Add support for Dimensity 1200 MT6893 - mtk-sd: Fix condition to enable single burst type - mtk-sd: Optimize several code-paths by aggregating register-writes - renesas_sdhi: Add support for the Renesas RZ/V2N variant - sdhci-msm: Add support for the SM7150 variant - sdhci-esdhc-imx: Re-factor the system PM logic - sdhci-esdhc-imx: Lots of improvements around the tuning support - sdhci-of-arasan: Add support for the Renesas RZ/N1D variant - sdhci-of-dwcmhsc: Add Sophgo SG2044 support - sdhci-of-esdhc: Add support for the LS1021a variant - sdhci-of-k1: Add new driver to support for SpacemiT K1 controller - sdhci-pic32: Convert microchip,sdhci-pic32 DT doc to json schema - wmt-sdmmc: Convert DT doc to json schema" * tag 'mmc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) dt-bindings: mmc: sdhci-of-dwcmhsc: Allow use of a power-domain mmc: sdhci-esdhc-imx: fix few build warnings mmc: bcm2835: Use str_read_write() helper mmc: host: sdhci-esdhc-imx: refactor the system PM logic mmc: sdhci: export APIs for sdhci irq wakeup mmc: sdhci-of-k1: add support for SpacemiT K1 SoC dt-bindings: mmc: spacemit,sdhci: add support for K1 SoC mmc: core: Scan the eMMC boot areas for partition table dt-binding: mmc: microchip,sdhci-pic32: convert text based binding to json schema mmc: rename mmc_boot_partition_access() to mmc_host_can_access_boot() mmc: rename mmc_host_uhs() to mmc_host_can_uhs() mmc: rename mmc_host_done_complete() to mmc_host_can_done_complete() mmc: rename mmc_host_cmd23() to mmc_host_can_cmd23() mmc: sdhci-esdhc-imx: fix defined but not used warnings dt-bindings: mmc: vt8500-sdmmc: Convert to YAML dt-bindings: mmc: sdhci-msm: Add the SM7150 compatible dt-bindings: mmc: fsl,esdhc: add compatible string fsl,ls1021a-esdhc mmc: cavium-thunderx: Use non-hybrid PCI devres API dt-bindings: mmc: mtk-sd: Add support for Dimensity 1200 MT6893 dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo SG2044 support ...	2025-05-27 16:23:25 -07:00
Linus Torvalds	418da6ee1e	Merge tag 'pmdomain-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm ... Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Add residency reflection for domain-idlestates to debugfs - Add genpd helper to correct the usage/rejected counters pmdomain providers: - mediatek: Add support for Dimensity 1200 MT6893 - qcom: Add support for SM4450 power domains - rockchip: Add support for RK3562 SoC - sunxi: Add support for Allwinner H6/H616 PRCM PPU - ti: Fix STANDBY handling of OMAP2+ PER power domain cpuidle-psci: - Correct the domain-idlestate statistics in debugfs" * tag 'pmdomain-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (23 commits) pmdomain: ti: Fix STANDBY handling of PER power domain pmdomain: amlogic: Constify some structures pmdomain: core: Use genpd->opp_table to simplify error/remove path pmdomain: core: Simplify return statement in genpd_power_off() pmdomain: core: Convert genpd_power_off() to void pmdomain: core: Convert to device_awake_path() pmdomain: mediatek: Add error messages for missing regmaps pmdomain: arm: Do not enable by default during compile testing pmdomain: qcom: rpmhpd: Add SM4450 power domains dt-bindings: power: qcom,rpmpd: Add SM4450 compatible pmdomain: sunxi: add H6 PRCM PPU driver dt-bindings: power: Add Allwinner H6/H616 PRCM PPU pmdomain: bcm: bcm2835-power: Use devm_clk_get_optional pmdomain: rockchip: Add support for RK3562 SoC dt-bindings: power: rockchip: Add support for RK3562 SoC pmdomain: mediatek: Add support for Dimensity 1200 MT6893 pmdomain: mediatek: Bump maximum bus protect data array elements dt-bindings: power: mediatek: Support Dimensity 1200 MT6893 MTCMOS pmdomain: core: Reset genpd->states to avoid freeing invalid data pmdomain: core: Add residency reflection for domain-idlestates to debugfs ...	2025-05-27 16:19:30 -07:00
Linus Torvalds	c7c1863536	Merge tag 'for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply ... Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - support charge_types in extensions Power-supply drivers: - new driver for Pegatron Chagall battery - new driver for Maxim MAX8971 charger - new driver for Huawei Matebook E Go - bq27xxx: retry failed I2C transmissions - bq24190: add BQ24193 support - misc small cleanups and fixes Reset drivers: - new driver for Toradex SMARC Embedded Controller - reboot-mode: add support for modes containing / in DT - atmel,at91sam9260-reset: support sama7d65 - syscon-reboot: add Google GS101 support - misc small cleanups and fixes" * tag 'for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits) power: supply: rt9471: Simplify definition of some struct linear_range power: supply: max77976: add EXTCON dependency power: supply: Add support for Maxim MAX8971 charger dt-bindings: power: supply: Document Maxim MAX8971 charger power: supply: max17040: adjust thermal channel scaling power: reset: syscon-reboot: add gs101-specific reset dt-bindings: reset: syscon-reboot: add google,gs101-reboot power: supply: add Huawei Matebook E Go psy driver power: supply: Add driver for Pegatron Chagall battery dt-bindings: power: supply: Document Pegatron Chagall fuel gauge dt-bindings: vendor-prefixes: add prefix for Pegatron Corporation power: supply: cros_charge-control: Avoid -Wflex-array-member-not-at-end warning power: reset: add Toradex Embedded Controller dt-bindings: power: reset: add toradex,smarc-ec power: supply: support charge_types in extensions power: supply: max77705: Fix workqueue error handling in probe power: supply: wm831x: Constify struct chg_map and some arrays power: bq24190: Add BQ24193 support dt-bindings: power: supply: bq24190: Add BQ24193 compatible power: supply: sysfs: Remove duplicate NUL termination ...	2025-05-27 16:14:56 -07:00
Linus Torvalds	5722a6cecf	Merge tag 'spi-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi ... Pull spi updates from Mark Brown: "The bulk of the changes in this release are driver work, as well as new device support we have some important work on performance over several drivers, and big overhauls for maintainability on a couple too. Highlights include: - Big cleanups of the sh-msiof driver from Geert Uytterhoeven, and of the NXP FSPI driver from Haibo Chen - Performance improvements for the AXI SPI engine - Support for writes to memory mapped flashes on Renesas devices - Integrated DMA support for Tegra210 QSPI, used by the Tegra234 - DMA support for Amlogic SPI controllers - Support for AMD HID2, Qualcomm IPQ5018, Renesas RZ/G3E, Rockchip RK3528 and Samsung Exynos Autov920 An update to fix some issues with the Atmel QSPI driver runtime PM pulled in a new API from the PM core, and the Renesas memory mapped write changes pull in some code that's shared in drivers/memory" * tag 'spi-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (90 commits) spi: spi-qpic-snand: return early on error from qcom_spi_io_op() spi: loopback-test: fix up const pointer issue in rx_ranges_cmp() spi: gpio: fix const issue in spi_to_spi_gpio() spi: spi-qpic-snand: remove superfluous parameters of qcom_spi_check_error() dt-bindings: spi: samsung: add exynosautov920-spi compatible spi: spi-qpic-snand: reuse qcom_spi_check_raw_flash_errors() spi: dt-bindings: Add rk3528-spi compatible spi: spi_amd: Update Kconfig dependencies spi: spi_amd: Add HIDDMA basic write support spi: spi_amd: Remove read{q,b} usage on DMA buffer spi: sh-msiof: Move register definitions to <linux/spi/sh_msiof.h> spi: sh-msiof: Document frame start sync pulse mode spi: sh-msiof: Double maximum DMA transfer size using two groups spi: sh-msiof: Simplify BRG's Division Ratio spi: sh-msiof: Increase TX FIFO size for R-Car V4H/V4M spi: sh-msiof: Correct RX FIFO size for R-Car Gen3 spi: sh-msiof: Correct RX FIFO size for R-Car Gen2 spi: sh-msiof: Add core support for dual-group transfers spi: sh-msiof: Correct SIMDR2_GRPMASK spi: sh-msiof: SIFCTR bitfield conversion ...	2025-05-27 15:53:55 -07:00
Linus Torvalds	350d9ab736	Merge tag 'regulator-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator ... Pull regulator updates from Mark Brown: "This is a very quiet release, there was no work on the core and a good chunk of the updates were the result of conversions to use newer GPIO APIs. We did gain support for Analog ADP5055 and TI TPS65214 devices, and there's a new restart handler for the PCA9450 which allows devices using it to be properly power cycled on reboot, but otherwise it's minor fixes and API updates" * tag 'regulator-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits) regulator: qcom_spmi: Constify struct spmi_voltage_range regulator: max8952: Correct Samsung "Electronics" spelling in copyright headers regulator: dt-bindings: mt6357: Drop fixed compatible requirement regulator: gpio: Use dev_err_probe regulator: pca9450: Add restart handler regulator: da9121: Fix Wvoid-pointer-to-enum-cast warning regulator: tps65219: Add TI TPS65214 Regulator Support regulator: tps65219: Add support for TPS65215 Regulator IRQs regulator: tps65219: Add support for TPS65215 regulator resources regulator: tps65219: Update struct names regulator: pf9453: convert to use maple tree register cache regulator: max20086: Change enable gpio to optional regulator: max20086: Fix MAX200086 chip id regulator: adp5055: Remove unneeded semicolon regulator: adp5055: remove duplicate device table regulator: adp5055: Add driver for adp5055 regulator: dt-bindings: adi,adp5055-regulator: Add adp5055 support regulator: don't compare raw GPIO descriptor pointers regulator: rpi-panel-attiny: use new GPIO line value setter callbacks regulator: rpi-panel-attiny: use lock guards for the state mutex ...	2025-05-27 15:49:58 -07:00
Linus Torvalds	aacc73ceeb	Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux ... Pull gpio updates from Bartosz Golaszewski: "We have three new drivers, some refactoring in the GPIO core, lots of various changes across many drivers, new configfs interface for the virtual gpio-aggregator module and DT-bindings updates. The treewide conversion of GPIO drivers to using the new value setter callbacks is ongoing with another round of GPIO drivers updated. You will also see these commits coming in from other subsystems as with the relevant changes merged into mainline last cycle, I've started converting GPIO providers located elsewhere than drivers/gpio/. GPIO core: - use more lock guards where applicable - refactor GPIO ACPI code and shrink it in the process by 8% - move GPIO ACPI quirks into a separate file - remove unneeded #ifdef - convert GPIO devres helpers to using devm_add_action() where applicable which shrinks and simplifies the code - refactor GPIO descriptor validation in GPIO consumer interfaces - don't allow setting values on input lines in the GPIO core which will take off the burden from GPIO drivers of checking this down the line - provide gpiod_is_equal() as a way of safely comparing two GPIO descriptors (the only current user is in regulator core) New drivers: - add the GPIO module for the max77759 multifunction device - add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller - add the GPIO driver for the Spacemit K1 SoC Driver improvements: - convert more drivers to using the new GPIO line value setter callbacks - convert more drivers to making the irq_chip immutable as is recommended by the interrupt subsystem - extend build testing coverage by enabling more modules to be built with COMPILE_TEST=y - extend the gpio-aggregator module with a configfs interface that makes the setup easier for user-space than the existing driver-level sysfs attributes and also adds more advanced configuration features (such as referring to aggregated lines by their original names or modifying their names as exposed by the aggregated chip) - add a missing mutex_destroy() in gpio-imx-scu - add an OF polarity quirk for s5m8767 - allow building gpio-vf610 as a loadable module - make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS interface disabled (another small step towards getting rid of the global GPIO numberspace) - add support for level-triggered interrupts to gpio-pca953x - don't double-check the ngpios property in gpio-ds4520 as GPIO core already does it - don't double-check the number of GPIOs in gpio-imx-scu as GPIO core already does it - remove unused callbacks from gpio-max3191x DT bindings: - add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new drivers added this cycle) - document more properties for gpio-vf610 and gpio-tegra186 - document a new pca95xx variant - fix style of examples in several GPIO DT-binding documents Misc: - TODO list updates" * tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits) gpio: timberdale: select GPIOLIB_IRQCHIP gpio: lpc18xx: select GPIOLIB_IRQCHIP gpio: grgpio: select GPIOLIB_IRQCHIP gpio: bcm-kona: select GPIOLIB_IRQCHIP dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges gpio: davinci: select GPIOLIB_IRQCHIP gpiolib-acpi: Update file references in the Documentation and MAINTAINERS gpiolib: acpi: Move quirks to a separate file gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter gpiolib: acpi: Handle deferred list via new API gpiolib: acpi: Make sure we fill struct acpi_gpio_info gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list() gpiolib: acpi: Use temporary variable for struct acpi_gpio_info gpiolib: remove unneeded #ifdef gpio: mpc8xxx: select GPIOLIB_IRQCHIP gpio: pxa: select GPIOLIB_IRQCHIP gpio: pxa: Make irq_chip immutable gpio: timberdale: Make irq_chip immutable gpio: xgene-sb: Make irq_chip immutable gpio: davinci: Make irq_chip immutable ...	2025-05-27 15:22:01 -07:00