We need the USB fixes in here as well, and this resolves the following
merge conflicts that were reported in linux-next:
drivers/usb/chipidea/ci_hdrc_imx.c
drivers/usb/host/xhci.h
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes to resolve reported
problems for 6.15-rc4. Included in here are:
- misc chrdev region range fix reported by many people
- nvmem driver fixes and dt updates
- mei new device id and fixes
- comedi driver fix
- pps driver fix
- binder debug log fix
- pci1xxxx driver fixes
- firmware driver fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
firmware: stratix10-svc: Add of_platform_default_populate()
mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type
mei: vsc: Fix fortify-panic caused by invalid counted_by() use
pps: generators: tio: fix platform_set_drvdata()
mcb: fix a double free bug in chameleon_parse_gdd()
misc: microchip: pci1xxxx: Fix incorrect IRQ status handling during ack
misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registration
char: misc: register chrdev region with all possible minors
mei: me: add panther lake H DID
comedi: jr3_pci: Fix synchronous deletion of timer
binder: fix offset calculation in debug log
intel_th: avoid using deprecated page->mapping, index fields
dt-bindings: nvmem: Add compatible for MSM8960
dt-bindings: nvmem: Add compatible for IPQ5018
nvmem: qfprom: switch to 4-byte aligned reads
nvmem: core: update raw_len if the bit reading is required
nvmem: core: verify cell's raw_len
nvmem: core: fix bit offsets of more than one byte
dt-bindings: nvmem: fixed-cell: increase bits start value to 31
dt-bindings: nvmem: Add compatible for MS8937
...
The dt-core typically allows multiple compatibles[1] but usb-device
currently forces a single compatible.
This is an issue when multiple devices with slightly different productID
all behave the same. This would require the driver to keep updating its
compatible matching table to include this new productID instead of doing
what is usually done: have two compatibles, the leftmost which matches
exactly the HW device definition, and the rightmost one as a fallback
which is assumed to be 100% compatible with the device at hand. If this
assumption turns out to be wrong, it is easy to work around this without
having to modify the device tree by handling the leftmost compatible in the driver.
[1] https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/dt-core.yaml#L21-L25
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250418-dt-binding-usb-device-compatibles-v2-1-b3029f14e800@cherry.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the Renesas USBHS controller found on the Renesas RZ/V2H(P) SoC.
The USBHS block on RZ/V2H(P) is functionally identical to the one on the
RZ/G2L family, so no driver changes are needed. The existing
"renesas,rzg2l-usbhs" fallback compatible will continue to be used for
handling this IP.
In addition, update the schema validation logic by replacing the enum list
of SoC-specific compatibles with a const "renesas,rzg2l-usbhs" as all
listed SoCs share identical USBHS hardware and already include the fallback
compatible. This will help to simplify the schema and avoid redundancy.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250414165201.362262-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Qualcomm USB glue is not separate of the Synopsys DWC3 core and
several of the snps,dwc3 properties (such as clocks and reset) conflicts
in expectation with the Qualcomm integration.
Using the newly split out Synopsys DWC3 core properties, describe the
Qualcomm USB block in a single block. The new binding is a copy of
qcom,dwc3 with the needed modifications.
It would have been convenient to retain the two structures with the same
compatibles, but as there exist no way to select a binding based on the
absence of a subnode/patternProperty, a new generic compatible is
introduced to describe this binding.
To avoid redefining all the platform-specific compatibles, "select" is
used to tell the DeviceTree validator which binding to use solely on the
generic compatible. (Otherwise if the specific compatible matches during
validation, the generic one must match as well)
Mark qcom,dwc3 deprecated, to favor expressing future platforms using
the new combined binding.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250414-dwc3-refactor-v7-2-f015b358722d@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX95 USB2.0 controller is mostly compatible with i.MX7D, except it
requires a second interrupt for wakeup handling. Add the compatible string
for the i.MX95 platform, add the iommus property, and enforce the
interrupt property restriction. Keep the same restriction for existing
compatible strings.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250318150908.1583652-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This controller support scalable data lanes from 1 to 4. Add the
'data-lanes' property to configure the number of MIPI display panel lanes
selected for boards.
Change $ref of port@1 from 'port' to 'port-base' and add 'endpoint'
property referencing video-interfaces.yaml. Allow 'data-lanes' values
1, 2, 3, and 4 for port@1.
Fix below CHECK_DTB warnings:
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb:
dsi@30a00000: ports:port@1:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected)
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250407150442.2778299-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
Pull RTC updates from Alexandre Belloni:
"We see a net reduction of the number of lines of code thanks to the
removal of a now unused driver and a testing tool that is not used
anymore. Apart from this, the max31335 driver gets support for a new
part number and pm8xxx gets UEFI support.
Core:
- setdate is removed as it has better replacements
- skip alarms with a second resolution when we know the RTC doesn't
support those.
Subsystem:
- remove unnecessary private struct members
- use devm_pm_set_wake_irq were relevant
Drivers:
- ds1307: stop disabling alarms on probe for DS1337, DS1339, DS1341
and DS3231
- max31335: add max31331 support
- pcf50633 is removed as support for the related SoC has been removed
- pcf85063: properly handle POR failures"
* tag 'rtc-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: remove 'setdate' test program
selftest: rtc: skip some tests if the alarm only supports minutes
rtc: mt6397: drop unused defines
rtc: pcf85063: replace dev_err+return with return dev_err_probe
rtc: pcf85063: do a SW reset if POR failed
rtc: max31335: Add driver support for max31331
dt-bindings: rtc: max31335: Add max31331 support
rtc: cros-ec: Avoid a couple of -Wflex-array-member-not-at-end warnings
dt-bindings: rtc: pcf2127: Reference spi-peripheral-props.yaml
rtc: rzn1: implement one-second accuracy for alarms
rtc: pcf50633: Remove
rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
rtc: pm8xxx: mitigate flash wear
rtc: pm8xxx: add support for uefi offset
dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
rtc: rv3032: drop WADA
rtc: rv3032: fix EERD location
rtc: pm8xxx: switch to devm_device_init_wakeup
rtc: pm8xxx: fix possible race condition
rtc: mpfs: switch to devm_device_init_wakeup
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
Pull more thermal control updates from Rafael Wysocki:
"These are mostly assorted updates of thermal drivers used on ARM
platforms:
- Use dev_err_probe() helpers to simplify the init code in the Qoriq
thermal driver (Frank Li)
- Power down the Qoriq's TMU at suspend time (Alice Guo)
- Add ipq5332, ipq5424 compatible to the QCom's tsens thermal driver
and TSENS enable / calibration support for V2 (Praveenkumar I)
- Add missing rk3328 mapping entry (Trevor Woerner)
- Remove duplicate struct declaration from the thermal core header
file (Xueqin Luo)
- Disable the monitoring mode during suspend in the LVTS Mediatek
driver to prevent temperature acquisition glitches (Nícolas F. R.
A. Prado)
- Disable Stage 3 thermal threshold in the LVTS Mediatek driver
because it disables the suspend ability and does not have an
interrupt handler (Nícolas F. R. A. Prado)
- Fix low temperature offset interrupt in the LVTS Mediatek driver to
prevent multiple interrupts from triggering when the system is at
its normal functionning temperature (Nícolas F. R. A. Prado)
- Enable interrupts in the LVTS Mediatek driver only on sensors that
are in use (Nícolas F. R. A. Prado)
- Add the BCM74110 compatible DT binding and the corresponding code
to support a chip based on a different process node than previous
chips (Florian Fainelli)
- Correct indentation and style in DTS example (Krzysztof Kozlowski)
- Unify hexadecimal annotatation in the rcar_gen3 driver (Niklas
Söderlund)
- Factor out the code logic to read fuses on Gen3 and Gen4 in the
rcar_gen3 thermal driver (Niklas Söderlund)
- Drop unused driver data from the QCom's spmi temperature alarm
driver (Johan Hovold)"
* tag 'thermal-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/qcom-spmi-temp-alarm: Drop unused driver data
thermal: rcar_gen3: Reuse logic to read fuses on Gen3 and Gen4
thermal: rcar_gen3: Use lowercase hex constants
dt-bindings: thermal: Correct indentation and style in DTS example
thermal/drivers/brcmstb_thermal: Add support for BCM74110
dt-bindings: thermal: Update for BCM74110
thermal/drivers/mediatek/lvts: Only update IRQ enable for valid sensors
thermal/drivers/mediatek/lvts: Start sensor interrupts disabled
thermal/drivers/mediatek/lvts: Disable low offset IRQ for minimum threshold
thermal/drivers/mediatek/lvts: Disable Stage 3 thermal threshold
thermal/drivers/mediatek/lvts: Disable monitor mode during suspend
thermal: core: Remove duplicate struct declaration
thermal/drivers/rockchip: Add missing rk3328 mapping entry
thermal/drivers/tsens: Add TSENS enable and calibration support for V2
dt-bindings: thermal: tsens: Add ipq5332, ipq5424 compatible
thermal/drivers/qoriq: Power down TMU on system suspend
thermal/drivers/qoriq: Use dev_err_probe() simplify the code
Pull i3c updates from Alexandre Belloni:
"The silvaco driver gets support for the integration of the IP in the
Nuvoton npcm845 SoC. There is also a fix for a possible NULL pointer
dereference that can happen with early IBIs. Summary:
Core:
- Fix a possible NULL pointer dereference due to IBI coming when the
target driver is not yet probed.
Drivers:
- mipi-i3c-hci: Use I2C DMA-safe api
- svc: add Nuvoton npcm845 support"
* tag 'i3c/for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Add NULL pointer check in i3c_master_queue_ibi()
i3c: master: Drop duplicate check before calling OF APIs
i3c: master: svc: Fix implicit fallthrough in svc_i3c_master_ibi_work()
i3c: master: svc: Fix missing STOP for master request
i3c: master: svc: Use readsb helper for reading MDB
i3c: master: svc: Fix missing the IBI rules
i3c: master: svc: Fix i3c_master_get_free_addr return check
i3c: master: svc: Fix npcm845 DAA process corruption
i3c: master: svc: Fix npcm845 invalid slvstart event
i3c: master: svc: Fix npcm845 FIFO empty issue
i3c: master: svc: Add support for Nuvoton npcm845 i3c
dt-bindings: i3c: silvaco: Add npcm845 compatible string
dt-bindings: i3c: dw: Add power-domains
i3c: master: svc: Flush FIFO before sending Dynamic Address Assignment(DAA)
i3c: mipi-i3c-hci: Use I2C DMA-safe api
i3c: Remove the const qualifier from i2c_msg pointer in i2c_xfers API
MAINTAINERS: Add Frank Li to Silvaco I3C
MAINTAINERS: Remove Conor Culhane from Silvaco I3C
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog driver for Lenovo SE30 platform
- Add support for Allwinner A523
- Add i.MX94 support
- watchdog framework: Convert to use device property
- renesas,wdt: Document RZ/G3E support
- Various other fixes and improvemenents
* tag 'linux-watchdog-6.15-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sunxi_wdt: Add support for Allwinner A523
dt-bindings: watchdog: sunxi: add Allwinner A523 compatible string
watchdog: aspeed: fix 64-bit division
watchdog: npcm: Remove unnecessary NULL check before clk_prepare_enable/clk_disable_unprepare
dt-bindings: watchdog: renesas,wdt: Document RZ/G3E support
watchdog: Convert to use device property
watchdog: lenovo_se30_wdt: include io.h for devm_ioremap()
dt-bindings: watchdog: fsl-imx7ulp-wdt: Add i.MX94 support
watchdog: nic7018_wdt: tidy up ACPI ID table
watchdog: s3c2410_wdt: Fix PMU register bits for ExynosAutoV920 SoC
watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform
watchdog: Enable RZV2HWDT driver depend on ARCH_RENESAS
watchdog: cros-ec: Add newlines to printks
watchdog: aspeed: Update bootstatus handling
Pull i2c updates from Wolfram Sang:
"i2c-core updates (collected by Wolfram):
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi):
Refactoring and cleanups:
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements:
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features:
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support:
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers:
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz):
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros"
* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
irqdomain: i2c: Switch to irq_find_mapping()
i2c: iproc: Refactor prototype and remove redundant error checks
i2c: qcom-geni: Update i2c frequency table to match hardware guidance
i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
i2c: pasemi: Add registers bits and switch to BIT()
i2c: k1: Initialize variable before use
i2c: spacemit: add support for SpacemiT K1 SoC
dt-bindings: i2c: spacemit: add support for K1 SoC
i2c: omap: Add support for setting mux
dt-bindings: i2c: omap: Add mux-states property
i2c: octeon: remove 10-bit addressing support
i2c: octeon: fix return commenting
i2c: i801: Use MMIO if available
i2c: i801: Switch to iomapped register access
i2c: i801: Improve too small kill wait time in i801_check_post
i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
i2c: i801: Cosmetic improvements
i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
i2c: cadence: Simplify using devm_clk_get_enabled()
...
Pull dmaengine updates from Vinod Koul:
"The dmaengine subsystem updates for this cycle consist of a new driver
(Microchip) along with couple of yaml binding conversions, core api
updates and bunch of driver updates etc.
New HW support:
- Microchip sama7d65 dma controller
- Yaml conversion of atmel dma binding and Freescale Elo DMA
Controller binding
Core:
- Remove device_prep_dma_imm_data() API as users are removed
- Reduce scope of some less frequently used DMA request channel APIs
with aim to cleanup these in future
Updates:
- Drop Fenghua Yu from idxd maintainers, as he changed jobs
- AMD ptdma support for multiqueue and ae4dma deprecated PCI IDs
removal"
* tag 'dmaengine-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (29 commits)
dmaengine: ptdma: Utilize the AE4DMA engine's multi-queue functionality
dmaengine: ae4dma: Use the MSI count and its corresponding IRQ number
dmaengine: ae4dma: Remove deprecated PCI IDs
dmaengine: Remove device_prep_dma_imm_data from struct dma_device
dmaengine: ti: edma: support sw triggered chans in of_edma_xlate()
dmaengine: ti: k3-udma: Enable second resource range for BCDMA and PKTDMA
dmaengine: fsl-edma: free irq correctly in remove path
dmaengine: fsl-edma: cleanup chan after dma_async_device_unregister
dt-bindings: dma: snps,dw-axi-dmac: Allow devices to be marked as noncoherent
dmaengine: dmatest: Fix dmatest waiting less when interrupted
dt-bindings: dma: Convert fsl,elo*-dma to YAML
dt-bindings: dma: fsl-mxs-dma: Add compatible string for i.MX8 chips
dmaengine: Fix typo in comment
dmaengine: ti: k3-udma-glue: Drop skip_fdq argument from k3_udma_glue_reset_rx_chn
dmaengine: bcm2835-dma: fix warning when CONFIG_PM=n
dt-bindings: dma: fsl,edma: Add i.MX94 support
dt-bindings: dma: atmel: add microchip,sama7d65-dma
dmaengine: img-mdc: remove incorrect of_match_ptr annotation
dmaengine: idxd: Delete unnecessary NULL check
dmaengine: pxa: Enable compile test
...
Pull phy updates from Vinod Koul:
"A fairly moderate sized request for the generic phy subsystem with
some new device and driver support along with driver updates with
Samsung and Qualcomm ones being major ones.
New HW Support:
- Qualcomm X1P42100 PCIe Gen4x4, QCS615 qmp usbc, PCIe UNIPHY 28LP
driver, SM8750 QMP UFS PHY
- Rockchip rk3576 hdptx, rk3562 naneng-combo support
- Samsung MIPI D-/C-PHY driver, ExynosAutov920 ufs phy driver
Updates:
- Samsung USB3 Type-C lane orientation detection and configuration
for Google gs101
- Qualcomm support for dual lane PHY support for QCS8300 SoC"
* tag 'phy-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (47 commits)
phy: rockchip-naneng-combo: Support rk3562
dt-bindings: phy: rockchip: Add rk3562 naneng-combophy compatible
phy: rockchip: Add Samsung MIPI D-/C-PHY driver
dt-bindings: phy: Add Rockchip MIPI C-/D-PHY schema
phy: qcom: uniphy-28lp: add COMMON_CLK dependency
phy: rockchip: usbdp: Remove unnecessary bool conversion
phy: rockchip: usbdp: Avoid call hpd_event_trigger in dp_phy_init
phy: rockchip: usbdp: Only verify link rates/lanes/voltage when the corresponding set flags are set
phy: qcom-qmp-pcie: add dual lane PHY support for QCS8300
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS8300 QMP PCIe PHY Gen4 x2
phy: qcom-qmp-ufs: Add PHY Configuration support for sm8750
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the SM8750 QMP UFS PHY
phy: qcom: Introduce PCIe UNIPHY 28LP driver
dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
phy: qcom: qmp-usbc: Add qmp configuration for QCS615
phy: freescale: imx8m-pcie: assert phy reset and perst in power off
phy: freescale: imx8m-pcie: cleanup reset logic
phy: core: Remove unused phy_pm_runtime_(allow|forbid)
dt-bindings: phy: document Allwinner A523 USB-2.0 PHY
phy: phy-rockchip-samsung-hdptx: Add support for RK3576
...
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
Yo,
This series is partly leveraging Clement's work adding a validate
callback in the extension detection code so that things like checking
for whether a vector crypto extension is usable can be done like:
has_extension(<vector crypto>)
rather than
has_vector() && has_extension(<vector crypto>)
which Eric pointed out was a poor design some months ago.
The rest of this is adding some requirements to the bindings that
prevent combinations of extensions disallowed by the ISA.
There's a bunch of over-long lines in here, but I thought that the
over-long lines were clearer than breaking them up.
Cheers,
Conor.
* patches from https://lore.kernel.org/r/20250312-abide-pancreas-3576b8c44d2c@spud:
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
RISC-V: add vector extension validation checks
Link: https://lore.kernel.org/r/20250312-abide-pancreas-3576b8c44d2c@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Pull mailbox updates from Jassi Brar:
"Core:
- misc rejig of header includes
- minor const fixes
Misc:
- constify amba_id table
pcc:
- cleanup and refactoring of shmem and irq handling
qcom:
- add MSM8226 compatible
fsl,mu:
- add i.MX94 compatible
mediatek:
- remove cl in struct cmdq_pkt
tegra:
- define dimensioning masks in SoC data"
* tag 'mailbox-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (25 commits)
mailbox: Remove unneeded semicolon
mailbox: pcc: Refactor and simplify check_and_ack()
mailbox: pcc: Always map the shared memory communication address
mailbox: pcc: Refactor error handling in irq handler into separate function
mailbox: pcc: Use acpi_os_ioremap() instead of ioremap()
mailbox: pcc: Return early if no GAS register from pcc_mbox_cmd_complete_check
mailbox: pcc: Drop unnecessary endianness conversion of pcc_hdr.flags
mailbox: pcc: Always clear the platform ack interrupt first
mailbox: pcc: Fix the possible race in updation of chan_in_use flag
dt-bindings: mailbox: qcom: add compatible for MSM8226 SoC
dt-bindings: mailbox: fsl,mu: Add i.MX94 compatible
MAINTAINERS: add mailbox API's tree type and location
mailbox: remove unused header files
mailbox: explicitly include <linux/bits.h>
mailbox: sort headers alphabetically
mailbox: don't protect of_parse_phandle_with_args with con_mutex
mailbox: use error ret code of of_parse_phandle_with_args()
mailbox: arm_mhuv2: Constify amba_id table
mailbox: arm_mhu_db: Constify amba_id table
mailbox: arm_mhu: Constify amba_id table
...
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- remove unused set_charged infrastructure
- drop of_node from power_supply struct
Power-supply drivers:
- axp717: support devices without thermistors
- bq27xxx: support max design voltage for bq270x0 and bq27x10
- pcf50633: drop charger driver
- max1720x: add battery health support
- switch all power-supply devices from of_node to fwnode
- convert regmap users to maple tree register cache
- convert drivers to devm_kmemdup_array
- misc cleanups and fixes
Reset drivers:
- at91-sama5d2_shdwc: add sama7d65 support
* tag 'for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: mt6370: Remove redundant 'flush_workqueue()' calls
Revert "power: supply: bq27xxx: do not report bogus zero values"
power: supply: max77693: Fix wrong conversion of charge input threshold value
power: supply: pcf50633: Remove charger
power: supply: all: switch psy_cfg from of_node to fwnode
power: supply: core: get rid of of_node
power: reset: at91-sama5d2_shdwc: Add sama7d65 PMC
power: supply: smb347: convert to use maple tree register cache
power: supply: rt9455: convert to use maple tree register cache
power: supply: max1720x: convert to use maple tree register cache
power: supply: ltc4162l: convert to use maple tree register cache
power: supply: bq25980: convert to use maple tree register cache
power: supply: bq25890: convert to use maple tree register cache
power: supply: bq2515x: convert to use maple tree register cache
power: supply: bq24257: convert to use maple tree register cache
power: supply: bd99954: convert to use maple tree register cache
power: supply: Remove unused set_charged method
power: supply: ds2760: Remove unused ds2760_battery_set_charged
power: supply: core: Remove unused power_supply_set_battery_charged
power: supply: sc27xx: use devm_kmemdup_array()
...
Pull clk updates from Stephen Boyd:
"Here's the pile of clk driver patches. The usual suspects^Wsilicon
vendors are all here, adding new SoC support and fixing existing code.
There are a few patches to the clk framework here as well. They've
been baking in linux-next for weeks so I'm hoping we don't have to
revert them. The disable OF node patch is probably the scariest one
although it seems unlikely that a system would be relying on a driver
_not_ probing because the clk never appeared, but you never know.
Nothing looks out of the ordinary on the driver side but that's
because it's mostly a bunch of data.
Core:
- Use dev_err_probe() in the clk registration path (Peering into the
crystal ball shows many patches that remove printks)
- Check for disabled OF nodes in of_clk_get_hw_from_clkspec()
New Drivers:
- Allwinner A523/T527 clk driver
- Qualcomm IPQ9574 NSS clk driver
- Qualcomm QCS8300 GPU and video clk drivers
- Qualcomm SDM429 RPM clks
- Qualcomm QCM6490 LPASS (low power audio) resets
- Samsung Exynos2200: driver for several clock controllers (Alive,
CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
- Samsung Exynos7870: Driver for several clock controllers (Alive,
MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI)
- Rockchip rk3528 and rk3562 clk driver
Updates:
- Various fixes to SoC clk drivers for incorrect data, avoid touching
protected registers, etc.
- Additions for some missing clks in existing SoC clk drivers
- DT schema conversions from text to YAML
- Kconfig cleanups to allow drivers to be compiled on moar
architectures"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
clk: qcom: Add NSS clock Controller driver for IPQ9574
clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
clk: amlogic: a1: fix a typo
clk: amlogic: gxbb: drop non existing 32k clock parent
clk: amlogic: gxbb: drop incorrect flag on 32k clock
clk: amlogic: g12b: fix cluster A parent data
clk: amlogic: g12a: fix mmc A peripheral clock
dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
dt-bindings: reset: fix double id on rk3562-cru reset ids
drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
dt-bindings: clock: qcom: Add compatible for QCM6490 boards
clk: qcom: gdsc: Update the status poll timeout for GDSC
clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
clk: davinci: remove support for da830
...
Pull remoteproc updates from Bjorn Andersson:
- Transition the i.MX8MP DSP remoteproc driver to use the reset
framework for driving the run/stall reset bits
- Add support for managing the modem remoteprocessor on the Qualcomm
MSM8226, MSM8926, and SM8750 platforms
* tag 'rproc-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (28 commits)
remoteproc: qcom_q6v5_pas: Make single-PD handling more robust
remoteproc: qcom_q6v5_pas: Use resource with CX PD for MSM8226
remoteproc: core: Clear table_sz when rproc_shutdown
remoteproc: sysmon: Update qcom_add_sysmon_subdev() comment
dt-bindings: remoteproc: Consolidate SC8180X and SM8150 PAS files
irqdomain: remoteproc: Switch to of_fwnode_handle()
remoteproc: qcom: pas: add minidump_id to SC7280 WPSS
remoteproc: imx_dsp_rproc: Document run_stall struct member
remoteproc: qcom: pas: Add SM8750 MPSS
dt-bindings: remoteproc: Add SM8750 MPSS
imx_dsp_rproc: Use reset controller API to control the DSP
reset: imx8mp-audiomix: Add support for DSP run/stall
reset: imx8mp-audiomix: Introduce active_low configuration option
reset: imx8mp-audiomix: Prepare the code for more reset bits
reset: imx8mp-audiomix: Add prefix for internal macro
dt-bindings: dsp: fsl,dsp: Add resets property
dt-bindings: reset: audiomix: Add reset ids for EARC and DSP
remoteproc: qcom_wcnss: Handle platforms with only single power domain
dt-bindings: remoteproc: qcom,wcnss-pil: Add support for single power-domain platforms
remoteproc: qcom_q6v5_mss: Add modem support on MSM8926
...
