This patch moves netconsole selftests from drivers/net to its own target
in drivers/net/netconsole.
This change helps saving some resources from CI since tests in
drivers/net automatically run against real hardware which are not used
by netconsole tests as they rely solely on netdevsim.
lib_netcons.sh is kept under drivers/net/lib since it is also used by
bonding selftests. Finally, drivers/net config remains unchanged as
netpoll_basic.py requires netconsole (and does leverage real HW testing).
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Link: https://patch.msgid.link/20260127-netcons-selftest-target-v2-1-f509ab65b3bc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add BAR_SUBRANGE_TEST to the pci_endpoint kselftest suite.
The test uses the PCITEST_BAR_SUBRANGE ioctl and will skip when the
chosen BAR is disabled (-ENODATA), when the endpoint/controller does not
support subrange mapping (-EOPNOTSUPP), or when the BAR is reserved for
the test register space (-EBUSY).
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260124145012.2794108-9-den@valinux.co.jp
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, CAN and wireless.
There are no known regressions currently under investigation.
Current release - fix to a fix:
- can: gs_usb_receive_bulk_callback(): fix error message
Current release - regressions:
- eth: gve: fix probe failure if clock read fails
Previous releases - regressions:
- ipv6: use the right ifindex when replying to icmpv6 from localhost
- mptcp: fix race in mptcp_pm_nl_flush_addrs_doit()
- bluetooth: fix null-ptr-deref in hci_uart_write_work
- eth:
- sfc: fix deadlock in RSS config read
- ice: ifix NULL pointer dereference in ice_vsi_set_napi_queues
- mlx5: fix memory leak in esw_acl_ingress_lgcy_setup()
Previous releases - always broken:
- core: fix segmentation of forwarding fraglist GRO
- wifi: mac80211: correctly decode TTLM with default link map
- mptcp: avoid dup SUB_CLOSED events after disconnect
- nfc: fix memleak in nfc_llcp_send_ui_frame().
- eth:
- bonding: fix use-after-free due to enslave fail
- mlx5e:
- TC, delete flows only for existing peers
- fix inverted cap check in tx flow table root disconnect"
* tag 'net-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
net: fix segmentation of forwarding fraglist GRO
wifi: mac80211: correctly decode TTLM with default link map
selftests: mptcp: join: fix local endp not being tracked
selftests: mptcp: check subflow errors in close events
mptcp: only reset subflow errors when propagated
selftests: mptcp: check no dup close events after error
mptcp: avoid dup SUB_CLOSED events after disconnect
net/mlx5e: Skip ESN replay window setup for IPsec crypto offload
net/mlx5: Fix vhca_id access call trace use before alloc
net/mlx5: fs, Fix inverted cap check in tx flow table root disconnect
net: phy: micrel: fix clk warning when removing the driver
net/mlx5e: don't assume psp tx skbs are ipv6 csum handling
net: bridge: fix static key check
nfc: nci: Fix race between rfkill and nci_unregister_device().
gve: fix probe failure if clock read fails
net/mlx5e: Account for netdev stats in ndo_get_stats64
net/mlx5e: TC, delete flows only for existing peers
net/mlx5: Fix Unbinding uplink-netdev in switchdev mode
ice: stop counting UDP csum mismatch as rx_errors
ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues
...
Add a kselftest for RISC-V control flow integrity implementation for
user mode. There is not a lot going on in the kernel to enable landing
pad for user mode. CFI selftests are intended to be compiled with a
zicfilp and zicfiss enabled compiler. This kselftest simply checks if
landing pads and shadow stacks for the process are enabled or not and
executes ptrace selftests on CFI. The selftest then registers a
SIGSEGV signal handler. Any control flow violations are reported as
SIGSEGV with si_code = SEGV_CPERR. The test will fail on receiving
any SEGV_CPERR. The shadow stack part has more changes in the kernel,
and thus there are separate tests for that.
- Exercise 'map_shadow_stack' syscall
- 'fork' test to make sure COW works for shadow stack pages
- gup tests
Kernel uses FOLL_FORCE when access happens to memory via
/proc/<pid>/mem. Not breaking that for shadow stack.
- signal test. Make sure signal delivery results in token creation on
shadow stack and consumes (and verifies) token on sigreturn
- shadow stack protection test. attempts to write using regular store
instruction on shadow stack memory must result in access faults
- ptrace test: adds landing pad violation, clears ELP and continues
In case the toolchain doesn't support the CFI extension, the CFI
kselftest won't be built.
Test output
===========
"""
TAP version 13
1..5
This is to ensure shadow stack is indeed enabled and working
This is to ensure shadow stack is indeed enabled and working
ok 1 shstk fork test
ok 2 map shadow stack syscall
ok 3 shadow stack gup tests
ok 4 shadow stack signal tests
ok 5 memory protections of shadow stack memory
"""
Suggested-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-28-b55691eacf4f@rivosinc.com
[pjw@kernel.org: updated to apply; cleaned up patch description, code comments]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
We've run out of bits to describe RISC-V ISA extensions in our initial
hwprobe key, RISCV_HWPROBE_KEY_IMA_EXT_0. So, let's add
RISCV_HWPROBE_KEY_IMA_EXT_1, along with the framework to set the
appropriate hwprobe tuple, and add testing for it.
Based on a suggestion from Andrew Jones <andrew.jones@oss.qualcomm.com>,
also fix the documentation for RISCV_HWPROBE_KEY_IMA_EXT_0.
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Similar to IPIP, introduce specific selftest for IP6IP6 flowtable SW
acceleration in nft_flowtable.sh
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
When running this mptcp_join.sh selftest on older kernel versions not
supporting local endpoints tracking, this test fails because 3 MP_JOIN
ACKs have been received, while only 2 were expected.
It is not clear why only 2 MP_JOIN ACKs were expected on old kernel
versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on
the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is
expected in the selftests included in this kernel version, see commit
f4480eaad489 ("selftests: mptcp: add missing join check").
Switch the expected MP_JOIN ACKs to 3. While at it, move this
chk_join_nr helper out of the special condition for older kernel
versions as it is now the same as with more recent ones. Also, invert
the condition to be more logical: what's expected on newer kernel
versions having such helper first.
Fixes: d4c81bbb86 ("selftests: mptcp: join: support local endpoint being tracked or not")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: subflow closed events should contain
an error field when a subflow got closed with an error, e.g. reset or
timeout.
For this test, the chk_evt_nr helper has been extended to check
attributes in the matched events.
In this test, the 2 subflow closed events should have an error.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-4-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: subflow closed events are re-sent
with less info when the initial subflow is disconnected after an error
and each time a subflow is closed after that.
In this new test, the userspace PM is involved because that's how it was
discovered, but it is not specific to it. The initial subflow is
terminated with a RESET, and that will cause the subflow disconnect.
Then, a new subflow is initiated, but also got rejected, which cause a
second subflow closed event, but not a third one.
While at it, in case of failure to get the expected amount of events,
the events are printed.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d82809b6c5 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-2-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a bug in assoc_sk_only_mismatch() and
assoc_sk_only_mismatch_tx() that creates a race condition which
triggers test flakes in later test cases e.g. data_send_bad_key().
The problem is that the client uses the "conn clr" rpc to setup a data
connection with psp_responder, but never uses a matching "data close"
rpc. This creates a race condition where if the client can queue
another data sock request, like in data_send_bad_key(), before the
server can accept the old connection from the backlog we end up in a
situation where we have two connections in the backlog: one for the
closed connection we have received a FIN for, and one for the new PSP
connection which is expecting to do key exchange.
From there the server pops the closed connection from the backlog, but
the data_send_bad_key() test case in psp.py hangs waiting to perform
key exchange.
The fix is to properly use _conn_close, which fill force the server to
remove the closed connection from the backlog before sending the RPC
ack to the client.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260127-psp-flaky-test-v1-1-13403e390af3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test tcp_tx_timestamp() behavior after ("tcp: tcp_tx_timestamp()
must look at the rtx queue").
Without the fix, this new test fails like this:
tcp_timestamping_tcp_tx_timestamp_bug.pkt:55: runtime error in recvmsg call: Expected result 0 but got -1 with errno 11 (Resource temporarily unavailable)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260127123828.4098577-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The verification signature header generation requires converting a
binary certificate to a C array. Previously this only worked with
xxd (part of vim-common package).
As xxd may not be available on some systems building selftests, it makes
sense to substitute it with more common utils: hexdump, wc, sed to
generate equivalent C array output.
Tested by generating header with both xxd and hexdump and comparing
them.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20260128190552.242335-1-mykyta.yatsenko5@gmail.com
When fp-pidbench was originally written SVE hardware was not widely
available so it was useful to run it in emulation and the default number
of loops was set very low, running for less than a second on actual
hardware. Now that SVE hardware is reasonably available it is very much
less interesting to use emulation, bump the default number of loops up to
even out a bit of the noise on real systems. On the machine I have to hand
this now takes about 15s which is still a toy microbenchmark but perhaps a
bit more useful.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Some applications use SVE intermittently, one common case being where SVE
is used during statup (eg, by ld.so) but then rarely if ever during the
main application runtime. Add a repeat of the no SVE loop after we've done
the SVE loops to fp-pidbench to capture results for that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
In sync with the main kernel headers, include a stub version of
compiler-context-analysis.h in tools/include/linux/compiler_types.h and
remove the sparse context tracking definitions.
Since tools/ headers are generally self-contained, provide a standalone
tools/include/linux/compiler-context-analysis.h with no-op stubs for now. Also
clean up redundant stubs in tools/testing/shared/linux/kernel.h that are now
redundant.
This fixes build errors in tools/testing/radix-tree/ where headers from
include/linux/ (like cleanup.h) are used directly and expect these
macros to be defined:
| cc -I../shared -I. -I../../include -I../../arch/x86/include -I../../../lib -g -Og -Wall -D_LGPL_SOURCE -fsanitize=address -fsanitize=undefined -c -o radix-tree.o radix-tree.c
| In file included from ../shared/linux/cleanup.h:2,
| from ../shared/linux/../../../../include/linux/idr.h:18,
| from ../shared/linux/idr.h:5,
| from radix-tree.c:18:
| ../shared/linux/../../../../include/linux/idr.h: In function ‘class_idr_alloc_destructor’:
| ../shared/linux/../../../../include/linux/cleanup.h:283:9: error: expected declaration specifiers before ‘__no_context_analysis’
| 283 | __no_context_analysis \
| | ^~~~~~~~~~~~~~~~~~~~~
Closes: https://lore.kernel.org/oe-lkp/202601261546.d7ae2447-lkp@intel.com
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://patch.msgid.link/20260127111428.3747328-1-elver@google.com
The kselftest framework defines KSFT_SKIP=4 as the standard exit code
for skipped tests. However, phc.sh currently uses a mix of 'exit 0' and
'exit 1' to indicate skip conditions, which can confuse test harnesses
and CI systems.
This patch introduces ksft_skip=4 variable and unifies all skip exit
paths to use 'exit $ksft_skip', consistent with other selftests like
net/lib.sh and net/fib_nexthops.sh.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260126061532.12532-1-junjie.cao@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests that validate vsock sockets are resilient to deleting
namespaces. The vsock sockets should still function normally.
The function check_ns_delete_doesnt_break_connection() is added to
re-use the step-by-step logic of 1) setup connections, 2) delete ns,
3) check that the connections are still ok.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-12-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests to validate namespace correctness using vsock_test and socat.
The vsock_test tool is used to validate expected success tests, but
socat is used for expected failure tests. socat is used to ensure that
connections are rejected outright instead of failing due to some other
socket behavior (as tested in vsock_test). Additionally, socat is
already required for tunneling TCP traffic from vsock_test. Using only
one of the vsock_test tests like 'test_stream_client_close_client' would
have yielded a similar result, but doing so wouldn't remove the socat
dependency.
Additionally, check for the dependency socat. socat needs special
handling beyond just checking if it is on the path because it must be
compiled with support for both vsock and unix. The function
check_socat() checks that this support exists.
Add more padding to test name printf strings because the tests added in
this patch would otherwise overflow.
Add vm_dmesg_* helpers to encapsulate checking dmesg
for oops and warnings.
Add ability to pass extra args to host-side vsock_test so that tests
that cause false positives may be skipped with arg --skip.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-11-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests to verify CID collision rules across different vsock namespace
modes.
1. Two VMs with the same CID cannot start in different global namespaces
(ns_global_same_cid_fails)
2. Two VMs with the same CID can start in different local namespaces
(ns_local_same_cid_ok)
3. VMs with the same CID can coexist when one is in a global namespace
and another is in a local namespace (ns_global_local_same_cid_ok and
ns_local_global_same_cid_ok)
The tests ns_global_local_same_cid_ok and ns_local_global_same_cid_ok
make sure that ordering does not matter.
The tests use a shared helper function namespaces_can_boot_same_cid()
that attempts to start two VMs with identical CIDs in the specified
namespaces and verifies whether VM initialization failed or succeeded.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-10-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests for the /proc/sys/net/vsock/{ns_mode,child_ns_mode}
interfaces. Namely, that they accept/report "global" and "local" strings
and enforce their access policies.
Start a convention of commenting the test name over the test
description. Add test name comments over test descriptions that existed
before this convention.
Add a check_netns() function that checks if the test requires namespaces
and if the current kernel supports namespaces. Skip tests that require
namespaces if the system does not have namespace support.
This patch is the first to add tests that do *not* re-use the same
shared VM. For that reason, it adds a run_ns_tests() function to run
these tests and filter out the shared VM tests.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-9-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace /proc/net parsing with ss(8) for detecting listening sockets in
wait_for_listener() functions and add support for TCP, VSOCK, and Unix
socket protocols.
The previous implementation parsed /proc/net/tcp using awk to detect
listening sockets, but this approach could not support vsock because
vsock does not export socket information to /proc/net/.
Instead, use ss so that we can detect listeners on tcp, vsock, and unix.
The protocol parameter is now required for all wait_for_listener family
functions (wait_for_listener, vm_wait_for_listener,
host_wait_for_listener) to explicitly specify which socket type to wait
for.
ss is added to the dependency check in check_deps().
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-8-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add namespace support to vm management, ssh helpers, and vsock_test
wrapper functions. This enables running VMs and test helpers in specific
namespaces, which is required for upcoming namespace isolation tests.
The functions still work correctly within the init ns, though the caller
must now pass "init_ns" explicitly.
No functional changes for existing tests. All have been updated to pass
"init_ns" explicitly.
Affected functions (such as vm_start() and vm_ssh()) now wrap their
commands with 'ip netns exec' when executing commands in non-init
namespaces.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-6-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add functions for initializing namespaces with the different vsock NS
modes. Callers can use add_namespaces() and del_namespaces() to create
namespaces global0, global1, local0, and local1.
The add_namespaces() function initializes global0, local0, etc... with
their respective vsock NS mode by toggling child_ns_mode before creating
the namespace.
Remove namespaces upon exiting the program in cleanup(). This is
unlikely to be needed for a healthy run, but it is useful for tests that
are manually killed mid-test.
This patch is in preparation for later namespace tests.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260121-vsock-vmtest-v16-5-2859a7512097@meta.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The __exit__ method receives ex_type as the exception class when an
exception occurs. The previous code used implicit boolean evaluation:
terminate = self.terminate or (self._exit_wait and ex_type)
^^^^^^^^^^^
In Python, the and operator can be used with non-boolean values, but it
does not always return a boolean result.
This is probably not what we want, because 'self._exit_wait and ex_type'
could return the actual ex_type value (the exception class) rather than
a boolean True when an exception occurs.
Use explicit `ex_type is not None` check to properly evaluate whether
an exception occurred, returning a boolean result.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260125105524.773993-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test_bpftool_map.sh script tests that maps read/write accesses
are being properly allowed/refused by the kernel depending on a specific
fmod_ret program being attached on security_bpf_map function.
Rewrite this test to integrate it in the test_progs. The
new test spawns a few subtests:
#36/1 bpftool_maps_access/unprotected_unpinned:OK
#36/2 bpftool_maps_access/unprotected_pinned:OK
#36/3 bpftool_maps_access/protected_unpinned:OK
#36/4 bpftool_maps_access/protected_pinned:OK
#36/5 bpftool_maps_access/nested_maps:OK
#36/6 bpftool_maps_access/btf_list:OK
#36 bpftool_maps_access:OK
Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20260123-bpftool-tests-v4-3-a6653a7f28e7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_bpftool_metadata.sh script validates that bpftool properly
returns in its ouptput any metadata generated by bpf programs through
some .rodata sections.
Port this test to the test_progs framework so that it can be executed
automatically in CI. The new test, similarly to the former script,
checks that valid data appears both for textual output and json output,
as well as for both data not used at all and used data. For the json
check part, the expected json string is hardcoded to avoid bringing a
new external dependency (eg: a json deserializer) for test_progs.
As the test is now converted into test_progs, remove the former script.
The newly converted test brings two new subtests:
#37/1 bpftool_metadata/metadata_unused:OK
#37/2 bpftool_metadata/metadata_used:OK
#37 bpftool_metadata:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20260123-bpftool-tests-v4-2-a6653a7f28e7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to integrate some bpftool tests into test_progs, define a few
specific helpers that allow to execute bpftool commands, while possibly
retrieving the command output. Those helpers most notably set the
path to the bpftool binary under test. This version checks different
possible paths relative to the directories where the different
test_progs runners are executed, as we want to make sure not to
accidentally use a bootstrap version of the binary.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20260123-bpftool-tests-v4-1-a6653a7f28e7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
CI occasionally reports failures in the
percpu_alloc/cpu_flag_lru_percpu_hash selftest, for example:
First test_progs failure (test_progs_no_alu32-x86_64-llvm-21):
#264/15 percpu_alloc/cpu_flag_lru_percpu_hash
...
test_percpu_map_op_cpu_flag:FAIL:bpf_map_lookup_batch value on specified cpu unexpected bpf_map_lookup_batch value on specified cpu: actual 0 != expected 3735929054
The unexpected value indicates that an element was removed from the map.
However, the test never calls delete_elem(), so the only possible cause
is LRU eviction.
This can happen when the current task migrates to another CPU: an
update_elem() triggers eviction because there is no available LRU node
on local freelist and global freelist.
Harden the test against this behavior by provisioning sufficient spare
elements. Set max_entries to 'nr_cpus * 2' and restrict the test to using
the first nr_cpus entries, ensuring that updates do not spuriously trigger
LRU eviction.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260119133417.19739-1-leon.hwang@linux.dev
The binary generated by check_hugetlb_options is missing in .gitignore
under the directory. Add it into the file so it won't be logged into
version control.
Signed-off-by: I-Hsin Cheng <richard120310@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
A new utility metadata_size was added in
commit 261b67f4e3 ("selftests: ublk: add utility to get block device metadata size")
but it was not added to .gitignore. Fix that by adding it there.
While at it sort all entries alphabetically and add a SPDX license header.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 261b67f4e3 ("selftests: ublk: add utility to get block device metadata size")
Signed-off-by: Alexander Atanasov <alex@zazolabs.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new selftest suite `exe_ctx` to verify the accuracy of the
bpf_in_task(), bpf_in_hardirq(), and bpf_in_serving_softirq() helpers
introduced in bpf_experimental.h.
Testing these execution contexts deterministically requires crossing
context boundaries within a single CPU. To achieve this, the test
implements a "Trigger-Observer" pattern using bpf_testmod:
1. Trigger: A BPF syscall program calls a new bpf_testmod kfunc
bpf_kfunc_trigger_ctx_check().
2. Task to HardIRQ: The kfunc uses irq_work_queue() to trigger a
self-IPI on the local CPU.
3. HardIRQ to SoftIRQ: The irq_work handler calls a dummy function
(observed by BPF fentry) and then schedules a tasklet to
transition into SoftIRQ context.
The user-space runner ensures determinism by pinning itself to CPU 0
before execution, forcing the entire interrupt chain to remain on a
single core. Dummy noinline functions with compiler barriers are
added to bpf_testmod.c to serve as stable attachment points for
fentry programs. A retry loop is used in user-space to wait for the
asynchronous SoftIRQ to complete.
Note that testing on s390x is avoided because supporting those helpers
purely in BPF on s390x is not possible at this point.
Reviewed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://lore.kernel.org/r/20260125115413.117502-3-changwoo@igalia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce bpf_in_nmi(), bpf_in_hardirq(), bpf_in_serving_softirq(), and
bpf_in_task() inline helpers in bpf_experimental.h. These allow BPF
programs to query the current execution context with higher granularity
than the existing bpf_in_interrupt() helper.
While BPF programs can often infer their context from attachment points,
subsystems like sched_ext may call the same BPF logic from multiple
contexts (e.g., task-to-task wake-ups vs. interrupt-to-task wake-ups).
These helpers provide a reliable way for logic to branch based on
the current CPU execution state.
Implementing these as BPF-native inline helpers wrapping
get_preempt_count() allows the compiler and JIT to inline the logic. The
implementation accounts for differences in preempt_count layout between
standard and PREEMPT_RT kernels.
Reviewed-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://lore.kernel.org/r/20260125115413.117502-2-changwoo@igalia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test session cookie for fsession. Multiple fsession BPF progs is attached
to bpf_fentry_test1() and session cookie is read and write in the
testcase.
bpf_get_func_ip() will influence the layout of the session cookies, so we
test the cookie in two case: with and without bpf_get_func_ip().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-13-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
