For the test implementation of the SuperH architecture a second serial
serial port needs to be used. Unfortunately the currently used 'stdio'
driver does not support multiple serial ports at the same time.
Switch to the 'file' driver which does support multiple ports and is
sufficient for the nolibc-test usecase.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20250623-nolibc-sh-v2-2-0f5b4b303025@weissschuh.net
On single-CPU systems, ops.select_cpu() is never called, causing the
EXIT_SELECT_CPU test case to wait indefinitely.
Avoid the stall by skipping this specific sub-test when only one CPU is
available.
Reported-by: Phil Auld <pauld@redhat.com>
Fixes: a5db7817af ("sched_ext: Add selftests")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This test suite validates the functionality of the devlink-rate API for
traffic class (TC) bandwidth allocation. It ensures that bandwidth can
be distributed between different traffic classes as configured, and
verifies that explicit TC-to-queue mapping is required for the
allocation to be effective.
The first test (test_no_tc_mapping_bandwidth) is marked as expected
failure on mlx5, since the hardware automatically enforces traffic
class separation by dynamically moving queues to the correct TC
scheduler, even without explicit TC-to-queue mapping configuration.
Test output on mlx5:
1..2
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results without TC mapping:
# TC 3: 0.19 Gbits/sec
# TC 4: 0.76 Gbits/sec
# Total bandwidth: 0.95 Gbits/sec
# TC 3 percentage: 20.0%
# TC 4 percentage: 80.0%
ok 1 devlink_rate_tc_bw.test_no_tc_mapping_bandwidth # XFAIL Bandwidth matched 80/20 split without TC mapping
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results with TC mapping:
# TC 3: 0.21 Gbits/sec
# TC 4: 0.78 Gbits/sec
# Total bandwidth: 0.98 Gbits/sec
# TC 3 percentage: 21.1%
# TC 4 percentage: 78.9%
# Bandwidth is distributed as 80/20 with TC mapping
ok 2 devlink_rate_tc_bw.test_tc_mapping_bandwidth
# Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zerocopy skbs are converted to regular copy skbs when data is queued
to a local socket. This happens in the existing test with a sender and
receiver communicating over a veth device.
Zerocopy skbs are sent without copying if egressing a device. Verify
that this behavior is maintained even in the common container setup
where data is forwarded over a veth to the physical device.
Update msg_zerocopy.sh to
1. Have a dummy network device to simulate a physical device.
2. Have forwarding enabled between veth and dummy.
3. Add a tx-only test that sends out dummy via the forwarding path.
4. Verify the exitcode of the sender, which signals zerocopy success.
As dummy drops all packets, this cannot be a TCP connection. Test
the new case with unconnected UDP only.
Update msg_zerocopy.c to
- Accept an argument whether send with zerocopy is expected.
- Return an exitcode whether behavior matched that expectation.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630194312.1571410-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new test to ensure that when the transport changes a null pointer
dereference does not occur. The bug was reported upstream [1] and fixed
with commit 2cb7c756f6 ("vsock/virtio: discard packets if the
transport changes").
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 2 UID: 0 PID: 463 Comm: kworker/2:3 Not tainted
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:vsock_stream_has_data+0x44/0x70
Call Trace:
virtio_transport_do_close+0x68/0x1a0
virtio_transport_recv_pkt+0x1045/0x2ae4
vsock_loopback_work+0x27d/0x3f0
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x35a/0x700
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
Note that this test may not fail in a kernel without the fix, but it may
hang on the client side if it triggers a kernel oops.
This works by creating a socket, trying to connect to a server, and then
executing a second connect operation on the same socket but to a
different CID (0). This triggers a transport change. If the connect
operation is interrupted by a signal, this could cause a null-ptr-deref.
Since this bug is non-deterministic, we need to try several times. It
is reasonable to assume that the bug will show up within the timeout
period.
If there is a G2H transport loaded in the system, the bug is not
triggered and this test will always pass. This is because
`vsock_assign_transport`, when using CID 0, like in this case, sets
vsk->transport to `transport_g2h` that is not NULL if a G2H transport is
available.
[1]https://lore.kernel.org/netdev/Z2LvdTTQR7dBmPb5@v4bel-B760M-AORUS-ELITE-AX/
Suggested-by: Hyunwoo Kim <v4bel@theori.io>
Suggested-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250630-test_vsock-v5-2-2492e141e80b@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a test case, as shown below, for the verifier error
"more than one arg with ref_obj_id".
0: (b7) r2 = 20
1: (b7) r3 = 0
2: (18) r1 = 0xffff92cee3cbc600
4: (85) call bpf_ringbuf_reserve#131
5: (55) if r0 == 0x0 goto pc+3
6: (bf) r1 = r0
7: (bf) r2 = r0
8: (85) call bpf_tcp_raw_gen_syncookie_ipv4#204
9: (95) exit
This error is currently incorrectly reported as a verifier bug, with a
warning. The next patch in this series will address that.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/3ba78e6cda47ccafd6ea70dadbc718d020154664.1751463262.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Pull iommufd fixes from Jason Gunthorpe:
"Some changes to the userspace selftest framework cause the iommufd
tests to start failing. This turned out to be bugs in the iommufd side
that were just getting uncovered.
- Deal with MAP_HUGETLB mmaping more than requested even when in
MAP_FIXED mode
- Fixup missing error flow cleanup in the test
- Check that the memory allocations suceeded
- Suppress some bogus gcc 'may be used uninitialized' warnings"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Fix build warnings due to uninitialized mfd
iommufd/selftest: Add asserts testing global mfd
iommufd/selftest: Add missing close(mfd) in memfd_mmap()
iommufd/selftest: Fix iommufd_dirty_tracking with large hugepage sizes
Add tests for different scenarios with bpf_cgroup_read_xattr:
1. Read cgroup xattr from bpf_cgroup_from_id;
2. Read cgroup xattr from bpf_cgroup_ancestor;
3. Read cgroup xattr from css_iter;
4. Use bpf_cgroup_read_xattr in LSM hook security_socket_connect.
5. Use bpf_cgroup_read_xattr in cgroup program.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/20250623063854.1896364-5-song@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Functions definitions without any argument list produce a warning with
-Wstrict-prototypes:
vdso_test_correctness.c:111:13: warning: function declaration isn’t a prototype [-Wstrict-prototypes]
111 | static void fill_function_pointers()
| ^~~~~~~~~~~~~~~~~~~~~~
Explicitly use an empty argument list.
Now that all selftests a free of this warning, enable it in the Makefile.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250611-selftests-vdso-fixes-v3-7-e62e37a6bcf5@linutronix.de
According to kselftest.h ksft_exit_skip() is not meant to be called when
a plan has already been printed.
Use the recommended function ksft_test_result_skip().
This fixes a bug, where the TAP output would be invalid when skipping:
TAP version 13
1..1
ok 2 # SKIP Not implemented on architecture
The SKIP line should start with "ok 1" as the plan only contains one test.
Fixes: 3b5992eaf7 ("selftests: vDSO: unconditionally build chacha test")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/all/20250611-selftests-vdso-fixes-v3-1-e62e37a6bcf5@linutronix.de
Add test cases for externally validated neighbor entries, testing both
IPv4 and IPv6. Name the file "test_neigh.sh" so that it could be
possibly extended in the future with more neighbor test cases.
Example output:
# ./test_neigh.sh
TEST: IPv4 "extern_valid" flag: Add entry [ OK ]
TEST: IPv4 "extern_valid" flag: Add with an invalid state [ OK ]
TEST: IPv4 "extern_valid" flag: Add with "use" flag [ OK ]
TEST: IPv4 "extern_valid" flag: Replace entry [ OK ]
TEST: IPv4 "extern_valid" flag: Replace entry with "managed" flag [ OK ]
TEST: IPv4 "extern_valid" flag: Replace with an invalid state [ OK ]
TEST: IPv4 "extern_valid" flag: Interface down [ OK ]
TEST: IPv4 "extern_valid" flag: Carrier down [ OK ]
TEST: IPv4 "extern_valid" flag: Transition to "reachable" state [ OK ]
TEST: IPv4 "extern_valid" flag: Transition back to "stale" state [ OK ]
TEST: IPv4 "extern_valid" flag: Forced garbage collection [ OK ]
TEST: IPv4 "extern_valid" flag: Periodic garbage collection [ OK ]
TEST: IPv6 "extern_valid" flag: Add entry [ OK ]
TEST: IPv6 "extern_valid" flag: Add with an invalid state [ OK ]
TEST: IPv6 "extern_valid" flag: Add with "use" flag [ OK ]
TEST: IPv6 "extern_valid" flag: Replace entry [ OK ]
TEST: IPv6 "extern_valid" flag: Replace entry with "managed" flag [ OK ]
TEST: IPv6 "extern_valid" flag: Replace with an invalid state [ OK ]
TEST: IPv6 "extern_valid" flag: Interface down [ OK ]
TEST: IPv6 "extern_valid" flag: Carrier down [ OK ]
TEST: IPv6 "extern_valid" flag: Transition to "reachable" state [ OK ]
TEST: IPv6 "extern_valid" flag: Transition back to "stale" state [ OK ]
TEST: IPv6 "extern_valid" flag: Forced garbage collection [ OK ]
TEST: IPv6 "extern_valid" flag: Periodic garbage collection [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250626073111.244534-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
