Refactor bpf_timer and bpf_wq to allow calling them from any context:
- add refcnt to bpf_async_cb
- map_delete_elem or map_free will drop refcnt to zero
via bpf_async_cancel_and_free()
- once refcnt is zero timer/wq_start is not allowed to make sure
that callback cannot rearm itself
- if in_hardirq defer to start/cancel operations to irq_work
Co-developed-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260201025403.66625-2-alexei.starovoitov@gmail.com
Add a kernel config option to set the default value of
workqueue.panic_on_stall, similar to CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC,
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC and CONFIG_BOOTPARAM_HUNG_TASK_PANIC.
This allows setting the number of workqueue stalls before triggering
a kernel panic at build time, which is useful for high-availability
systems that need consistent panic-on-stall, in other words, those
servers which run with CONFIG_BOOTPARAM_*_PANIC=y already.
The default remains 0 (disabled). Setting it to 1 will panic on the
first stall, and higher values will panic after that many stall
warnings. The value can still be overridden at runtime via the
workqueue.panic_on_stall boot parameter or sysfs.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a new kfunc called bpf_stream_print_stack to be used by programs
that need to print out their current BPF stack. The kfunc is essentially
a wrapper around the existing bpf_stream_dump_stack functionality used
to generate stack traces for error events like may_goto violations and
BPF-side arena page faults.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Scalar register IDs are used by the verifier to track relationships
between registers and enable bounds propagation across those
relationships. Once an ID becomes singular (i.e. only a single
register/stack slot carries it), it can no longer contribute to bounds
propagation and effectively becomes stale. The previous commit makes the
verifier clear such ids before caching the state.
When comparing the current and cached states for pruning, these stale
IDs can cause technically equivalent states to be considered different
and thus prevent pruning.
For example, in the selftest added in the next commit, two registers -
r6 and r7 are not linked to any other registers and get cached with
id=0, in the current state, they are both linked to each other with
id=A. Before this commit, check_scalar_ids would give temporary ids to
r6 and r7 (say tid1 and tid2) and then check_ids() would map tid1->A,
and when it would see tid2->A, it would not consider these state
equivalent.
Relax scalar ID equivalence by treating rold->id == 0 as "independent":
if the old state did not rely on any ID relationships for a register,
then any ID/linking present in the current state only adds constraints
and is always safe to accept for pruning. Implement this by returning
true immediately in check_scalar_ids() when old_id == 0.
Maintain correctness for the opposite direction (old_id != 0 && cur_id
== 0) by still allocating a temporary ID for cur_id == 0. This avoids
incorrectly allowing multiple independent current registers (id==0) to
satisfy a single linked old ID during mapping.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-5-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The maybe_widen_reg() function widens imprecise scalar registers to
unknown when their values differ between the cached and current states.
Previously, it used regs_exact() which also compared register IDs via
check_ids(), requiring registers to have matching IDs (or mapped IDs) to
be considered exact.
For scalar widening purposes, what matters is whether the value tracking
(bounds, tnum, var_off) is the same, not whether the IDs match. Two
scalars with identical value constraints but different IDs represent the
same abstract value and don't need to be widened.
Introduce scalars_exact_for_widen() that only compares the
value-tracking portion of bpf_reg_state (fields before 'id'). This
allows the verifier to preserve more scalar value information during
state merging when IDs differ but actual tracked values are identical,
reducing unnecessary widening and potentially improving verification
precision.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier assigns ids to scalar registers/stack slots when they are
linked through a mov or stack spill/fill instruction. These ids are
later used to propagate newly found bounds from one register to all
registers that share the same id. The verifier also compares the ids of
these registers in current state and cached state when making pruning
decisions.
When an ID becomes singular (i.e., only a single register or stack slot
has that ID), it can no longer participate in bounds propagation. During
comparisons between current and cached states for pruning decisions,
however, such stale IDs can prevent pruning of otherwise equivalent
states.
Find and clear all singular ids before caching a state in
is_state_visited(). struct bpf_idset which is currently unused has been
repurposed for this use case.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The next commit will allow clearing of scalar ids if no other
register/stack slot has that id. This is because if only one register
has a unique id, it can't participate in bounds propagation and is
equivalent to having no id.
But if the id of a stack slot is cleared by clear_singular_ids() in the
next commit, reading that stack slot into a register will not establish
a link because the stack slot's id is cleared.
This can happen in a situation where a register is spilled and later
loses its id due to a multiply operation (for example) and then the
stack slot's id becomes singular and can be cleared.
Make sure that scalar stack slots have an id before we read them into a
register.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some platforms require panic handling to execute on a specific CPU for
crash dump to work reliably. This can be due to firmware limitations,
interrupt routing constraints, or platform-specific requirements where
only a single CPU is able to safely enter the crash kernel.
Add the panic_force_cpu= kernel command-line parameter to redirect panic
execution to a designated CPU. When the parameter is provided, the CPU
that initially triggers panic forwards the panic context to the target CPU
via IPI, which then proceeds with the normal panic and kexec flow.
The IPI delivery is implemented as a weak function
(panic_smp_redirect_cpu) so architectures with NMI support can override it
for more reliable delivery.
If the specified CPU is invalid, offline, or a panic is already in
progress on another CPU, the redirection is skipped and panic continues on
the current CPU.
[pnina.feder@mobileye.com: fix unused variable warning]
Link: https://lkml.kernel.org/r/20260126122618.2967950-1-pnina.feder@mobileye.com
Link: https://lkml.kernel.org/r/20260122102457.1154599-1-pnina.feder@mobileye.com
Signed-off-by: Pnina Feder <pnina.feder@mobileye.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It may not appear obvious why kthread_affine_node() is not called before
the kthread creation completion instead of after the first wake-up.
The reason is that kthread_affine_node() applies a default affinity
behaviour that only takes place if no affinity preference have already
been passed by the kthread creation call site.
Add a comment to clarify that.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
When cpuset isolated partitions get updated, unbound kthreads get
indifferently affine to all non isolated CPUs, regardless of their
individual affinity preferences.
For example kswapd is a per-node kthread that prefers to be affine to
the node it refers to. Whenever an isolated partition is created,
updated or deleted, kswapd's node affinity is going to be broken if any
CPU in the related node is not isolated because kswapd will be affine
globally.
Fix this with letting the consolidated kthread managed affinity code do
the affinity update on behalf of cpuset.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
The managed affinity list currently contains only unbound kthreads that
have affinity preferences. Unbound kthreads globally affine by default
are outside of the list because their affinity is automatically managed
by the scheduler (through the fallback housekeeping mask) and by cpuset.
However in order to preserve the preferred affinity of kthreads, cpuset
will delegate the isolated partition update propagation to the
housekeeping and kthread code.
Prepare for that with including all unbound kthreads in the managed
affinity list.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
The kthreads preferred affinity related fields use "hotplug" as the base
of their naming because the affinity management was initially deemed to
deal with CPU hotplug.
The scope of this role is going to broaden now and also deal with
cpuset isolated partition updates.
Switch the naming accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cpuset isolated partitions are now included in HK_TYPE_DOMAIN. Testing
if a CPU is part of an isolated partition alone is now useless.
Remove the superflous test.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Until now, cpuset would propagate isolated partition changes to
timer migration so that unbound timers don't get migrated to isolated
CPUs.
Since housekeeping now centralizes, synchronize and propagates isolation
cpumask changes, perform the work from that subsystem for consolidation
and consistency purposes.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
The HK_TYPE_DOMAIN housekeeping cpumask is now modifiable at runtime. In
order to synchronize against PCI probe works and make sure that no
asynchronous probing is still pending or executing on a newly isolated
CPU, the housekeeping subsystem must flush the PCI probe works.
However the PCI probe works can't be flushed easily since they are
queued to the main per-CPU workqueue pool.
Solve this with creating a PCI probe-specific pool and provide and use
the appropriate flushing API.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-pci@vger.kernel.org
The HK_TYPE_DOMAIN housekeeping cpumask is now modifiable at runtime.
In order to synchronize against vmstat workqueue to make sure
that no asynchronous vmstat work is still pending or executing on a
newly made isolated CPU, the housekeeping susbsystem must flush the
vmstat workqueues.
This involves flushing the whole mm_percpu_wq workqueue, shared with
LRU drain, introducing here a welcome side effect.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-mm@kvack.org
Until now, HK_TYPE_DOMAIN used to only include boot defined isolated
CPUs passed through isolcpus= boot option. Users interested in also
knowing the runtime defined isolated CPUs through cpuset must use
different APIs: cpuset_cpu_is_isolated(), cpu_is_isolated(), etc...
There are many drawbacks to that approach:
1) Most interested subsystems want to know about all isolated CPUs, not
just those defined on boot time.
2) cpuset_cpu_is_isolated() / cpu_is_isolated() are not synchronized with
concurrent cpuset changes.
3) Further cpuset modifications are not propagated to subsystems
Solve 1) and 2) and centralize all isolated CPUs within the
HK_TYPE_DOMAIN housekeeping cpumask.
Subsystems can rely on RCU to synchronize against concurrent changes.
The propagation mentioned in 3) will be handled in further patches.
[Chen Ridong: Fix cpu_hotplug_lock deadlock and use correct static
branch API]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
HK_TYPE_DOMAIN's cpumask will soon be made modifiable by cpuset.
A synchronization mechanism is then needed to synchronize the updates
with the housekeeping cpumask readers.
Turn the housekeeping cpumasks into RCU pointers. Once a housekeeping
cpumask will be modified, the update side will wait for an RCU grace
period and propagate the change to interested subsystem when deemed
necessary.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Testing housekeeping_cpu() will soon require that either the RCU "lock"
is held or the cpuset mutex.
When CPUs get isolated through cpuset, the change is propagated to
timer migration such that isolation is also performed from the migration
tree. However that propagation is done using workqueue which tests if
the target is actually isolated before proceeding.
Lockdep doesn't know that the workqueue caller holds cpuset mutex and
that it waits for the work, making the housekeeping cpumask read safe.
Shut down the future warning by removing this test. It is unecessary
beyond hotplug, the workqueue is already targeted towards isolated CPUs.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Gabriele Monaco <gmonaco@redhat.com>
HK_TYPE_DOMAIN will soon integrate not only boot defined isolcpus= CPUs
but also cpuset isolated partitions.
Housekeeping still needs a way to record what was initially passed
to isolcpus= in order to keep these CPUs isolated after a cpuset
isolated partition is modified or destroyed while containing some of
them.
Create a new HK_TYPE_DOMAIN_BOOT to keep track of those.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
0-day bot flagged the use of strcpy() in blk_trace_setup(), because the
source buffer can theoretically be bigger than the destination buffer.
While none of the current callers pass a string bigger than
BLKTRACE_BDEV_SIZE, use strscpy() to prevent eventual future misuse and
silence the checker warnings.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202602020718.GUEIRyG9-lkp@intel.com/
Fixes: 113cbd6282 ("blktrace: pass blk_user_trace2 to setup functions")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consider the following sequence on a CPU configured with nohz_full:
1) A task P runs in cgroup A, and cgroup A becomes throttled due to CFS
bandwidth control. The gse (cgroup A) where the task P attached is
dequeued and the CPU switches to idle.
2) Before cgroup A is unthrottled, task P is migrated from cgroup A to
another cgroup B (not throttled).
During sched_move_task(), the task P is observed as queued but not
running, and therefore no resched_curr() is triggered.
3) Since the CPU is nohz_full, it remains in do_idle() waiting for an
explicit scheduling event, i.e., resched_curr().
4) For kernel <= 5.10: Later, cgroup A is unthrottled. However, the task
P has already been migrated out of cgroup A, so unthrottle_cfs_rq()
may observe load_weight == 0 and return early without resched_curr()
called. For kernel >= 6.6: The unthrottling path normally triggers
`resched_curr()` almost cases even when no runnable tasks remain in the
unthrottled cgroup, preventing the idle stall described above. However,
if cgroup A is removed before it gets unthrottled, the unthrottling path
for cgroup A is never executed. In a result, no `resched_curr()` can be
called.
5) At this point, the task P is runnable in cgroup B (not throttled), but
the CPU remains in do_idle() with no pending reschedule point. The
system stays in this state until an unrelated event (e.g. a new task
wakeup or any cases) that can trigger a resched_curr() breaks the
nohz_full idle state, and then the task P finally gets scheduled.
The root cause is that sched_move_task() may classify the task as only
queued, not running, and therefore fails to trigger a resched_curr(),
while the later unthrottling path no longer has visibility of the
migrated task.
Preserve the existing behavior for running tasks by issuing
resched_curr(), and explicitly invoke check_preempt_curr() for tasks
that were queued at the time of migration. This ensures that runnable
tasks are reconsidered for scheduling even when nohz_full suppresses
periodic ticks.
Fixes: 29f59db3a7 ("sched: group-scheduler core")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Aaron Lu <ziqianlu@bytedance.com>
Tested-by: Aaron Lu <ziqianlu@bytedance.com>
Link: https://patch.msgid.link/20260130083438.1122457-1-quzicheng@huawei.com
CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound
RT task, and a CFS task stuck in kernel space. When other CPUs switch from
RT to non-RT tasks, RT load balancing (LB) is triggered; with
HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution
of rto_push_irq_work_func. During push_rt_task on CPU0,
if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED
and after the push operation completes, CPU0 calls rto_next_cpu().
Since only CPU0 is overloaded in this scenario, rto_next_cpu() should
ideally return -1 (no further IPI needed).
However, multiple CPUs invoking tell_cpu_to_push() during LB increments
rd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch between
rd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart its
search from -1. With CPU0 remaining overloaded (satisfying rt_nr_migratory
&& rt_nr_total > 1), it gets reselected, causing CPU0 to queue irq_work to
itself and send self-IPIs repeatedly. As long as CPU0 stays overloaded and
other CPUs run pull_rt_tasks(), it falls into an infinite self-IPI loop,
which triggers a CPU hardlockup due to continuous self-interrupts.
The trigging scenario is as follows:
cpu0 cpu1 cpu2
pull_rt_task
tell_cpu_to_push
<------------irq_work_queue_on
rto_push_irq_work_func
push_rt_task
resched_curr(rq) pull_rt_task
rto_next_cpu tell_cpu_to_push
<-------------------------- atomic_inc(rto_loop_next)
rd->rto_loop != next
rto_next_cpu
irq_work_queue_on
rto_push_irq_work_func
Fix redundant self-IPI by filtering the initiating CPU in rto_next_cpu().
This solution has been verified to effectively eliminate spurious self-IPIs
and prevent CPU hardlockup scenarios.
Fixes: 4bdced5c9a ("sched/rt: Simplify the IPI based RT balancing logic")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Chen Jinghuang <chenjinghuang2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://patch.msgid.link/20260122012533.673768-1-chenjinghuang2@huawei.com
Read-mostly sched_clock_irqtime may share the same cacheline with
frequently updated nohz struct. Make it as static_key to avoid
false sharing issue.
The only user of disable_sched_clock_irqtime()
is tsc_.*mark_unstable() which may be invoked under atomic context
and require a workqueue to disable static_key. But both of them
calls clear_sched_clock_stable() just before doing
disable_sched_clock_irqtime(). We can reuse
"sched_clock_work" to also disable sched_clock_irqtime().
One additional case need to handle is if the tsc is marked unstable
before late_initcall() phase, sched_clock_work will not be invoked
and sched_clock_irqtime will stay enabled although clock is unstable:
tsc_init()
enable_sched_clock_irqtime() # irqtime accounting is enabled here
...
if (unsynchronized_tsc()) # true
mark_tsc_unstable()
clear_sched_clock_stable()
__sched_clock_stable_early = 0;
...
if (static_key_count(&sched_clock_running.key) == 2)
# Only happens at sched_clock_init_late()
__clear_sched_clock_stable(); # Never executed
...
# late_initcall() phase
sched_clock_init_late()
if (__sched_clock_stable_early) # Already false
__set_sched_clock_stable(); # sched_clock is never marked stable
# TSC unstable, but sched_clock_work won't run to disable irqtime
So we need to disable_sched_clock_irqtime() in sched_clock_init_late()
if clock is unstable.
Reported-by: Benjamin Lei <benjamin.lei@intel.com>
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Wangyang Guo <wangyang.guo@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Tianyou Li <tianyou.li@intel.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260127072509.2627346-1-wangyang.guo@intel.com
There are two problems with sched_server_write_common() that can cause the
dl_server to malfunction upon attempting to change the parameters:
1) when, after having disabled the dl_server by setting runtime=0, it is
enabled again while tasks are already enqueued. In this case is_active would
still be 0 and dl_server_start() would not be called.
2) when dl_server_apply_params() would fail, runtime is not applied and does
not reflect the new state.
Instead have dl_server_start() check its actual dl_runtime, and have
sched_server_write_common() unconditionally (re)start the dl_server. It will
automatically stop if there isn't anything to do, so spurious activation is
harmless -- while failing to start it is a problem.
While there, move the printk out of the locked region and make it symmetric,
also printing on enable.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260203103407.GK1282955@noisy.programming.kicks-ass.net
sched_ext currently suffers starvation due to RT. The same workload when
converted to EXT can get zero runtime if RT is 100% running, causing EXT
processes to stall. Fix it by adding a DL server for EXT.
A kselftest is also included later to confirm that both DL servers are
functioning correctly:
# ./runner -t rt_stall
===== START =====
TEST: rt_stall
DESCRIPTION: Verify that RT tasks cannot stall SCHED_EXT tasks
OUTPUT:
TAP version 13
1..1
# Runtime of FAIR task (PID 1511) is 0.250000 seconds
# Runtime of RT task (PID 1512) is 4.750000 seconds
# FAIR task got 5.00% of total runtime
ok 1 PASS: FAIR task got more than 4.00% of runtime
TAP version 13
1..1
# Runtime of EXT task (PID 1514) is 0.250000 seconds
# Runtime of RT task (PID 1515) is 4.750000 seconds
# EXT task got 5.00% of total runtime
ok 2 PASS: EXT task got more than 4.00% of runtime
TAP version 13
1..1
# Runtime of FAIR task (PID 1517) is 0.250000 seconds
# Runtime of RT task (PID 1518) is 4.750000 seconds
# FAIR task got 5.00% of total runtime
ok 3 PASS: FAIR task got more than 4.00% of runtime
TAP version 13
1..1
# Runtime of EXT task (PID 1521) is 0.250000 seconds
# Runtime of RT task (PID 1522) is 4.750000 seconds
# EXT task got 5.00% of total runtime
ok 4 PASS: EXT task got more than 4.00% of runtime
ok 1 rt_stall #
===== END =====
Co-developed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260126100050.3854740-5-arighi@nvidia.com
Updating "ppos" on error conditions does not make much sense. The pattern
is to return the error code directly without modifying the position, or
modify the position on success and return the number of bytes written.
Since on success, the return value of apply is 0, there is no point in
modifying ppos either. Fix it by removing all this and just returning
error code or number of bytes written on success.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260126100050.3854740-3-arighi@nvidia.com
Patch series "liveupdate: fixes in error handling".
This series contains some fixes in LUO's error handling paths.
The first patch deals with failed freeze() attempts. The cleanup path
calls unfreeze, and that clears some data needed by later unpreserve
calls.
The second patch is a bit more involved. It deals with failed retrieve()
attempts. To do so properly, it reworks some of the error handling logic
in luo_file core.
Both these fixes are "theoretical" -- in the sense that I have not been
able to reproduce either of them in normal operation. The only supported
file type right now is memfd, and there is nothing userspace can do right
now to make it fail its retrieve or freeze. I need to make the retrieve
or freeze fail by artificially injecting errors. The injected errors
trigger a use-after-free and a double-free.
That said, once more complex file handlers are added or memfd preservation
is used in ways not currently expected or covered by the tests, we will be
able to see them on real systems.
This patch (of 2):
The unfreeze operation is supposed to undo the effects of the freeze
operation. serialized_data is not set by freeze, but by preserve.
Consequently, the unpreserve operation needs to access serialized_data to
undo the effects of the preserve operation. This includes freeing the
serialized data structures for example.
If a freeze callback fails, unfreeze is called for all frozen files. This
would clear serialized_data for them. Since live update has failed, it
can be expected that userspace aborts, releasing all sessions. When the
sessions are released, unpreserve will be called for all files. The
unfrozen files will see 0 in their serialized_data. This is not expected
by file handlers, and they might either fail, leaking data and state, or
might even crash or cause invalid memory access.
Do not clear serialized_data on unfreeze so it gets passed on to
unpreserve. There is no need to clear it on unpreserve since luo_file
will be freed immediately after.
Link: https://lkml.kernel.org/r/20260126230302.2936817-1-pratyush@kernel.org
Link: https://lkml.kernel.org/r/20260126230302.2936817-2-pratyush@kernel.org
Fixes: 7c722a7f44 ("liveupdate: luo_file: implement file systems callbacks")
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull cgroup fixes from Tejun Heo:
"Three dmem fixes from Chen Ridong addressing use-after-free, RCU
warning, and NULL pointer dereference issues introduced with the dmem
controller.
All changes are confined to kernel/cgroup/dmem.c and can only affect
dmem controller users"
* tag 'cgroup-for-6.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/dmem: avoid pool UAF
cgroup/dmem: avoid rcu warning when unregister region
cgroup/dmem: fix NULL pointer dereference when setting max
The list_for_each_entry_rcu() in filter_chain() uses
rcu_read_lock_trace_held() as the lockdep condition, but the function
holds consumer_rwsem, not the RCU trace lock.
This gives me the following output when running with some locking debug
option enabled:
kernel/events/uprobes.c:1141 RCU-list traversed in non-reader section!!
filter_chain
register_for_each_vma
uprobe_unregister_nosync
__probe_event_disable
Remove the incorrect lockdep condition since the rwsem provides
sufficient protection for the list traversal.
Fixes: cc01bd044e ("uprobes: travers uprobe's consumer list locklessly under SRCU protection")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260128-uprobe_rcu-v2-1-994ea6d32730@debian.org
An UAF issue was observed:
BUG: KASAN: slab-use-after-free in page_counter_uncharge+0x65/0x150
Write of size 8 at addr ffff888106715440 by task insmod/527
CPU: 4 UID: 0 PID: 527 Comm: insmod 6.19.0-rc7-next-20260129+ #11
Tainted: [O]=OOT_MODULE
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
kasan_report+0xca/0x100
kasan_check_range+0x39/0x1c0
page_counter_uncharge+0x65/0x150
dmem_cgroup_uncharge+0x1f/0x260
Allocated by task 527:
Freed by task 0:
The buggy address belongs to the object at ffff888106715400
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 64 bytes inside of
freed 512-byte region [ffff888106715400, ffff888106715600)
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffff888106715300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106715380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888106715400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106715480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888106715500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
The issue occurs because a pool can still be held by a caller after its
associated memory region is unregistered. The current implementation frees
the pool even if users still hold references to it (e.g., before uncharge
operations complete).
This patch adds a reference counter to each pool, ensuring that a pool is
only freed when its reference count drops to zero.
Fixes: b168ed458d ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Cc: stable@vger.kernel.org # v6.14+
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A warnning was detected:
WARNING: suspicious RCU usage
6.19.0-rc7-next-20260129+ #1101 Tainted: G O
kernel/cgroup/dmem.c:456 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by insmod/532:
#0: ffffffff85e78b38 (dmemcg_lock){+.+.}-dmem_cgroup_unregister_region+
stack backtrace:
CPU: 2 UID: 0 PID: 532 Comm: insmod Tainted: 6.19.0-rc7-next-
Tainted: [O]=OOT_MODULE
Call Trace:
<TASK>
dump_stack_lvl+0xb0/0xd0
lockdep_rcu_suspicious+0x151/0x1c0
dmem_cgroup_unregister_region+0x1e2/0x380
? __pfx_dmem_test_init+0x10/0x10 [dmem_uaf]
dmem_test_init+0x65/0xff0 [dmem_uaf]
do_one_initcall+0xbb/0x3a0
The macro list_for_each_rcu() must be used within an RCU read-side critical
section (between rcu_read_lock() and rcu_read_unlock()). Using it outside
that context, as seen in dmem_cgroup_unregister_region(), triggers the
lockdep warning because the RCU protection is not guaranteed.
Replace list_for_each_rcu() with list_for_each_entry_safe(), which is
appropriate for traversal under spinlock protection where nodes may be
deleted.
Fixes: b168ed458d ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Cc: stable@vger.kernel.org # v6.14+
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
