Once a task exits it has its state set to TASK_DEAD and then it is
removed from the cgroup it belonged to. The last step happens on the task
gets out of its last schedule() invocation and is delayed on PREEMPT_RT
due to locking constraints.
As a result it is possible to receive a pid via waitpid() of a task
which is still listed in cgroup.procs for the cgroup it belonged
to. This is something that systemd does not expect and as a result it
waits for its exit until a time out occurs.
This can also be reproduced on !PREEMPT_RT kernel with a significant
delay in do_exit() after exit_notify().
Hide the task from the output which have PF_EXITING set which is done
before the parent is notified. Keeping zombies with live threads
shouldn't break anything (suggested by Tejun).
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20260219164648.3014-1-spasswolf@web.de/
Tested-by: Bert Karwatzki <spasswolf@web.de>
Fixes: 9311e6c29b ("cgroup: Fix sleeping from invalid context warning on PREEMPT_RT")
Cc: stable@vger.kernel.org # v6.19+
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull cgroup fixes from Tejun Heo:
- Fix circular locking dependency in cpuset partition code by
deferring housekeeping_update() calls to a workqueue instead
of calling them directly under cpus_read_lock
- Fix null-ptr-deref in rebuild_sched_domains_cpuslocked() when
generate_sched_domains() returns NULL due to kmalloc failure
- Fix incorrect cpuset behavior for effective_xcpus in
partition_xcpus_del() and cpuset_update_tasks_cpumask()
in update_cpumasks_hier()
- Fix race between task migration and cgroup iteration
* tag 'cgroup-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: fix null-ptr-deref in rebuild_sched_domains_cpuslocked
cgroup/cpuset: Call housekeeping_update() without holding cpus_read_lock
cgroup/cpuset: Defer housekeeping_update() calls from CPU hotplug to workqueue
cgroup/cpuset: Move housekeeping_update()/rebuild_sched_domains() together
kselftest/cgroup: Simplify test_cpuset_prs.sh by removing "S+" command
cgroup/cpuset: Set isolated_cpus_updating only if isolated_cpus is changed
cgroup/cpuset: Clarify exclusion rules for cpuset internal variables
cgroup/cpuset: Fix incorrect use of cpuset_update_tasks_cpumask() in update_cpumasks_hier()
cgroup/cpuset: Fix incorrect change to effective_xcpus in partition_xcpus_del()
cgroup: fix race between task migration and iteration
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here.
Fixes: b636fd38dc ("cgroup: Implement css_task_iter_skip()")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Qingye Zhao <zhaoqingye@honor.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull cgroup updates from Tejun Heo:
- cpuset changes:
- Continue separating v1 and v2 implementations by moving more
v1-specific logic into cpuset-v1.c
- Improve partition handling. Sibling partitions are no longer
invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
fail in v2, and effective_xcpus computation is made consistent
- Fix partition effective CPUs overlap that caused a warning on
cpuset removal when sibling partitions shared CPUs
- Increase the maximum cgroup subsystem count from 16 to 32 to
accommodate future subsystem additions
- Misc cleanups and selftest improvements including switching to
css_is_online() helper, removing dead code and stale documentation
references, using lockdep_assert_cpuset_lock_held() consistently, and
adding polling helpers for asynchronously updated cgroup statistics
* tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: fix overlap of partition effective CPUs
cgroup: increase maximum subsystem count from 16 to 32
cgroup: Remove stale cpu.rt.max reference from documentation
cpuset: replace direct lockdep_assert_held() with lockdep_assert_cpuset_lock_held()
cgroup/cpuset: Move the v1 empty cpus/mems check to cpuset1_validate_change()
cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict
cgroup/cpuset: Don't fail cpuset.cpus change in v2
cgroup/cpuset: Consistently compute effective_xcpus in update_cpumasks_hier()
cgroup/cpuset: Streamline rm_siblings_excl_cpus()
cpuset: remove dead code in cpuset-v1.c
cpuset: remove v1-specific code from generate_sched_domains
cpuset: separate generate_sched_domains for v1 and v2
cpuset: move update_domain_attr_tree to cpuset_v1.c
cpuset: add cpuset1_init helper for v1 initialization
cpuset: add cpuset1_online_css helper for v1-specific operations
cpuset: add lockdep_assert_cpuset_lock_held helper
cpuset: Remove unnecessary checks in rebuild_sched_domains_locked
cgroup: switch to css_is_online() helper
selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants
selftests: cgroup: make test_memcg_sock robust against delayed sock stats
...
The current cgroup subsystem limit of 16 is insufficient, as the number of
existing subsystems has already reached this limit. When adding a new
subsystem that is not yet in the mainline kernel, building with
`make allmodconfig` requires first bypassing the
`BUILD_BUG_ON(CGROUP_SUBSYS_COUNT > 16)` restriction to allow compilation
to succeed. However, the kernel still fails to boot afterward.
This patch increases the maximum number of supported cgroup subsystems from
16 to 32, providing enough room for future subsystem additions.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add GPL-2.0 SPDX license id lines to a few old
files, replacing the reference to the COPYING file.
The COPYING file at the time of creation of these files
(2007 and 2005) was GPL-v2.0, with an additional clause
indicating that only v2 applied.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgrp_ancestor_storage has two drawbacks:
- it's not guaranteed that the member immediately follows struct cgrp in
cgroup_root (root cgroup's ancestors[0] might thus point to a padding
and not in cgrp_ancestor_storage proper),
- this idiom raises warnings with -Wflex-array-member-not-at-end.
Instead of relying on the auxiliary member in cgroup_root, define the
0-th level ancestor inside struct cgroup (needed for static allocation
of cgrp_dfl_root), deeper cgroups would allocate flexible
_low_ancestors[]. Unionized alias through ancestors[] will
transparently join the two ranges.
The above change would still leave the flexible array at the end of
struct cgroup inside cgroup_root, so move cgrp also towards the end of
cgroup_root to resolve the -Wflex-array-member-not-at-end.
Link: https://lore.kernel.org/r/5fb74444-2fbb-476e-b1bf-3f3e279d0ced@embeddedor.com/
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Closes: https://lore.kernel.org/r/b3eb050d-9451-4b60-b06c-ace7dab57497@embeddedor.com/
Cc: David Laight <david.laight.linux@gmail.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use the new css_is_online() helper that has been introduced to check css
online state, instead of testing the CSS_ONLINE flag directly. This
improves readability and centralizes the state check logic.
No functional changes intended.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
Pull cgroup updates from Tejun Heo:
- Defer task cgroup unlink until after the dying task's final context
switch so that controllers see the cgroup properly populated until
the task is truly gone
- cpuset cleanups and simplifications.
Enforce that domain isolated CPUs stay in root or isolated partitions
and fail if isolated+nohz_full would leave no housekeeping CPU. Fix
sched/deadline root domain handling during CPU hot-unplug and race
for tasks in attaching cpusets
- Misc fixes including memory reclaim protection documentation and
selftest KTAP conformance
* tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Treat cpusets in attaching as populated
sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug
cgroup/cpuset: Introduce cpuset_cpus_allowed_locked()
docs: cgroup: No special handling of unpopulated memcgs
docs: cgroup: Note about sibling relative reclaim protection
docs: cgroup: Explain reclaim protection target
selftests/cgroup: conform test to KTAP format output
cpuset: remove need_rebuild_sched_domains
cpuset: remove global remote_children list
cpuset: simplify node setting on error
cgroup: include missing header for struct irq_work
cgroup: Fix sleeping from invalid context warning on PREEMPT_RT
cgroup/cpuset: Globally track isolated_cpus update
cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition
cgroup/cpuset: Move up prstate_housekeeping_conflict() helper
cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
cgroup: Defer task cgroup unlink until after the task is done switching out
cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()
cgroup: Rename cgroup lifecycle hooks to cgroup_task_*()
...
Pull cred guard updates from Christian Brauner:
"This contains substantial credential infrastructure improvements
adding guard-based credential management that simplifies code and
eliminates manual reference counting in many subsystems.
Features:
- Kernel Credential Guards
Add with_kernel_creds() and scoped_with_kernel_creds() guards that
allow using the kernel credentials without allocating and copying
them. This was requested by Linus after seeing repeated
prepare_kernel_creds() calls that duplicate the kernel credentials
only to drop them again later.
The new guards completely avoid the allocation and never expose the
temporary variable to hold the kernel credentials anywhere in
callers.
- Generic Credential Guards
Add scoped_with_creds() guards for the common override_creds() and
revert_creds() pattern. This builds on earlier work that made
override_creds()/revert_creds() completely reference count free.
- Prepare Credential Guards
Add prepare credential guards for the more complex pattern of
preparing a new set of credentials and overriding the current
credentials with them:
- prepare_creds()
- modify new creds
- override_creds()
- revert_creds()
- put_cred()
Cleanups:
- Make init_cred static since it should not be directly accessed
- Add kernel_cred() helper to properly access the kernel credentials
- Fix scoped_class() macro that was introduced two cycles ago
- coredump: split out do_coredump() from vfs_coredump() for cleaner
credential handling
- coredump: move revert_cred() before coredump_cleanup()
- coredump: mark struct mm_struct as const
- coredump: pass struct linux_binfmt as const
- sev-dev: use guard for path"
* tag 'kernel-6.19-rc1.cred' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
trace: use override credential guard
trace: use prepare credential guard
coredump: use override credential guard
coredump: use prepare credential guard
coredump: split out do_coredump() from vfs_coredump()
coredump: mark struct mm_struct as const
coredump: pass struct linux_binfmt as const
coredump: move revert_cred() before coredump_cleanup()
sev-dev: use override credential guards
sev-dev: use prepare credential guard
sev-dev: use guard for path
cred: add prepare credential guard
net/dns_resolver: use credential guards in dns_query()
cgroup: use credential guards in cgroup_attach_permissions()
act: use credential guards in acct_write_process()
smb: use credential guards in cifs_get_spnego_key()
nfs: use credential guards in nfs_idmap_get_key()
nfs: use credential guards in nfs_local_call_write()
nfs: use credential guards in nfs_local_call_read()
erofs: use credential guards
...
The kernel can throttle network sockets if the memory cgroup associated
with the corresponding socket is under memory pressure. The throttling
actions include clamping the transmit window, failing to expand receive or
send buffers, aggressively prune out-of-order receive queue, FIN deferred
to a retransmitted packet and more. Let's add memcg metric to track such
throttling actions.
At the moment memcg memory pressure is defined through vmpressure and in
future it may be defined using PSI or we may add more flexible way for the
users to define memory pressure, maybe through ebpf. However the
potential throttling actions will remain the same, so this newly
introduced metric will continue to track throttling actions irrespective
of how memcg memory pressure is defined.
Link: https://lkml.kernel.org/r/20251016161035.86161-1-shakeel.butt@linux.dev
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Daniel Sedlak <daniel.sedlak@cdn77.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To compile cgroup.c with PREEMPT_RT=y include header which declares
struct irq_work.
Fixes: 9311e6c29b ("cgroup: Fix sleeping from invalid context warning on PREEMPT_RT")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Bring in the shared branch with the kbuild tree to enable
'-fms-extensions' for 6.19. Further namespace cleanup work
requires this extension.
Signed-off-by: Christian Brauner <brauner@kernel.org>
cgroup_task_dead() is called from finish_task_switch() which runs with
preemption disabled and doesn't allow scheduling even on PREEMPT_RT. The
function needs to acquire css_set_lock which is a regular spinlock that can
sleep on RT kernels, leading to "sleeping function called from invalid
context" warnings.
css_set_lock is too large in scope to convert to a raw_spinlock. However,
the unlinking operations don't need to run synchronously - they just need
to complete after the task is done running.
On PREEMPT_RT, defer the work through irq_work. While the work doesn't need
to happen immediately, it can't be delayed indefinitely either as the dead
task pins the cgroup and task_struct can be pinned indefinitely. Use the
lazy version of irq_work to allow batching and lower impact while ensuring
timely completion.
v2: Use IRQ_WORK_INIT_LAZY instead of immediate irq_work and add explanation
for why the work can't be delayed indefinitely (Sebastian Andrzej Siewior).
Fixes: d245698d72 ("cgroup: Defer task cgroup unlink until after the task is done switching out")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Link: https://lore.kernel.org/r/20251104181114.489391-1-calvin@wbinvd.org
Signed-off-by: Tejun Heo <tj@kernel.org>
When a task exits, css_set_move_task(tsk, cset, NULL, false) unlinks the task
from its cgroup. From the cgroup's perspective, the task is now gone. If this
makes the cgroup empty, it can be removed, triggering ->css_offline() callbacks
that notify controllers the cgroup is going offline resource-wise.
However, the exiting task can still run, perform memory operations, and schedule
until the final context switch in finish_task_switch(). This creates a confusing
situation where controllers are told a cgroup is offline while resource
activities are still happening in it. While this hasn't broken existing
controllers, it has caused direct confusion for sched_ext schedulers.
Split cgroup_task_exit() into two functions. cgroup_task_exit() now only calls
the subsystem exit callbacks and continues to be called from do_exit(). The
css_set cleanup is moved to the new cgroup_task_dead() which is called from
finish_task_switch() after the final context switch, so that the cgroup only
appears empty after the task is truly done running.
This also reorders operations so that subsys->exit() is now called before
unlinking from the cgroup, which shouldn't break anything.
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, cgroup_task_exit() adds thread group leaders with live member
threads to their css_set's dying_tasks list (so cgroup.procs iteration can
still see the leader), and cgroup_task_release() later removes them with
list_del_init(&task->cg_list).
An upcoming patch will defer the dying_tasks list addition, moving it from
cgroup_task_exit() (called from do_exit()) to a new function called from
finish_task_switch(). However, release_task() (which calls
cgroup_task_release()) can run either before or after finish_task_switch(),
creating a race where cgroup_task_release() might try to remove the task from
dying_tasks before or while it's being added.
Move the list_del_init() from cgroup_task_release() to cgroup_task_free() to
fix this race. cgroup_task_free() runs from __put_task_struct(), which is
always after both paths, making the cleanup safe.
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The current names cgroup_exit(), cgroup_release(), and cgroup_free() are
confusing because they look like they're operating on cgroups themselves when
they're actually task lifecycle hooks. For example, cgroup_init() initializes
the cgroup subsystem while cgroup_exit() is a task exit notification to
cgroup. Rename them to cgroup_task_exit(), cgroup_task_release(), and
cgroup_task_free() to make it clear that these operate on tasks.
Cc: Dan Schatzberg <dschatzberg@meta.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The commit afa3701c0e ("cgroup: cgroup.stat.local time accounting")
introduced a seqcount to track freeze timing but initialized it as a
plain seqcount_t using seqcount_init().
However, the write-side critical section in cgroup_do_freeze() holds
the css_set_lock spinlock while calling write_seqcount_begin(). On
PREEMPT_RT kernels, spinlocks do not disable preemption, causing the
lockdep assertion for a plain seqcount_t, which checks for preemption
being disabled, to fail.
This triggers the following warning:
WARNING: CPU: 0 PID: 9692 at include/linux/seqlock.h:221
Fix this by changing the type to seqcount_spinlock_t and initializing
it with seqcount_spinlock_init() to associate css_set_lock with the
seqcount. This allows lockdep to correctly validate that the spinlock
is held during write operations, resolving the assertion failure on all
kernel configurations.
Reported-by: syzbot+27a2519eb4dad86d0156@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=27a2519eb4dad86d0156
Fixes: afa3701c0e ("cgroup: cgroup.stat.local time accounting")
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Link: https://lore.kernel.org/r/20251002165510.KtY3IT--@linutronix.de/
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
Pull cgroup updates from Tejun Heo:
- Extensive cpuset code cleanup and refactoring work with no functional
changes: CPU mask computation logic refactoring, introducing new
helpers, removing redundant code paths, and improving error handling
for better maintainability.
- A few bug fixes to cpuset including fixes for partition creation
failures when isolcpus is in use, missing error returns, and null
pointer access prevention in free_tmpmasks().
- Core cgroup changes include replacing the global percpu_rwsem with
per-threadgroup rwsem when writing to cgroup.procs for better
scalability, workqueue conversions to use WQ_PERCPU and
system_percpu_wq to prepare for workqueue default switching from
percpu to unbound, and removal of unused code including the
post_attach callback.
- New cgroup.stat.local time accounting feature that tracks frozen time
duration.
- Misc changes including selftests updates (new freezer time tests and
backward compatibility fixes), documentation sync, string function
safety improvements, and 64-bit division fixes.
* tag 'cgroup-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (39 commits)
cpuset: remove is_prs_invalid helper
cpuset: remove impossible warning in update_parent_effective_cpumask
cpuset: remove redundant special case for null input in node mask update
cpuset: fix missing error return in update_cpumask
cpuset: Use new excpus for nocpu error check when enabling root partition
cpuset: fix failure to enable isolated partition when containing isolcpus
Documentation: cgroup-v2: Sync manual toctree
cpuset: use partition_cpus_change for setting exclusive cpus
cpuset: use parse_cpulist for setting cpus.exclusive
cpuset: introduce partition_cpus_change
cpuset: refactor cpus_allowed_validate_change
cpuset: refactor out validate_partition
cpuset: introduce cpus_excl_conflict and mems_excl_conflict helpers
cpuset: refactor CPU mask buffer parsing logic
cpuset: Refactor exclusive CPU mask computation logic
cpuset: change return type of is_partition_[in]valid to bool
cpuset: remove unused assignment to trialcs->partition_root_state
cpuset: move the root cpuset write check earlier
cgroup/cpuset: Remove redundant rcu_read_lock/unlock() in spin_lock
cgroup: Remove redundant rcu_read_lock/unlock() in spin_lock
...
Pull namespace updates from Christian Brauner:
"This contains a larger set of changes around the generic namespace
infrastructure of the kernel.
Each specific namespace type (net, cgroup, mnt, ...) embedds a struct
ns_common which carries the reference count of the namespace and so
on.
We open-coded and cargo-culted so many quirks for each namespace type
that it just wasn't scalable anymore. So given there's a bunch of new
changes coming in that area I've started cleaning all of this up.
The core change is to make it possible to correctly initialize every
namespace uniformly and derive the correct initialization settings
from the type of the namespace such as namespace operations, namespace
type and so on. This leaves the new ns_common_init() function with a
single parameter which is the specific namespace type which derives
the correct parameters statically. This also means the compiler will
yell as soon as someone does something remotely fishy.
The ns_common_init() addition also allows us to remove ns_alloc_inum()
and drops any special-casing of the initial network namespace in the
network namespace initialization code that Linus complained about.
Another part is reworking the reference counting. The reference
counting was open-coded and copy-pasted for each namespace type even
though they all followed the same rules. This also removes all open
accesses to the reference count and makes it private and only uses a
very small set of dedicated helpers to manipulate them just like we do
for e.g., files.
In addition this generalizes the mount namespace iteration
infrastructure introduced a few cycles ago. As reminder, the vfs makes
it possible to iterate sequentially and bidirectionally through all
mount namespaces on the system or all mount namespaces that the caller
holds privilege over. This allow userspace to iterate over all mounts
in all mount namespaces using the listmount() and statmount() system
call.
Each mount namespace has a unique identifier for the lifetime of the
systems that is exposed to userspace. The network namespace also has a
unique identifier working exactly the same way. This extends the
concept to all other namespace types.
The new nstree type makes it possible to lookup namespaces purely by
their identifier and to walk the namespace list sequentially and
bidirectionally for all namespace types, allowing userspace to iterate
through all namespaces. Looking up namespaces in the namespace tree
works completely locklessly.
This also means we can move the mount namespace onto the generic
infrastructure and remove a bunch of code and members from struct
mnt_namespace itself.
There's a bunch of stuff coming on top of this in the future but for
now this uses the generic namespace tree to extend a concept
introduced first for pidfs a few cycles ago. For a while now we have
supported pidfs file handles for pidfds. This has proven to be very
useful.
This extends the concept to cover namespaces as well. It is possible
to encode and decode namespace file handles using the common
name_to_handle_at() and open_by_handle_at() apis.
As with pidfs file handles, namespace file handles are exhaustive,
meaning it is not required to actually hold a reference to nsfs in
able to decode aka open_by_handle_at() a namespace file handle.
Instead the FD_NSFS_ROOT constant can be passed which will let the
kernel grab a reference to the root of nsfs internally and thus decode
the file handle.
Namespaces file descriptors can already be derived from pidfds which
means they aren't subject to overmount protection bugs. IOW, it's
irrelevant if the caller would not have access to an appropriate
/proc/<pid>/ns/ directory as they could always just derive the
namespace based on a pidfd already.
It has the same advantage as pidfds. It's possible to reliably and for
the lifetime of the system refer to a namespace without pinning any
resources and to compare them trivially.
Permission checking is kept simple. If the caller is located in the
namespace the file handle refers to they are able to open it otherwise
they must hold privilege over the owning namespace of the relevant
namespace.
The namespace file handle layout is exposed as uapi and has a stable
and extensible format. For now it simply contains the namespace
identifier, the namespace type, and the inode number. The stable
format means that userspace may construct its own namespace file
handles without going through name_to_handle_at() as they are already
allowed for pidfs and cgroup file handles"
* tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (65 commits)
ns: drop assert
ns: move ns type into struct ns_common
nstree: make struct ns_tree private
ns: add ns_debug()
ns: simplify ns_common_init() further
cgroup: add missing ns_common include
ns: use inode initializer for initial namespaces
selftests/namespaces: verify initial namespace inode numbers
ns: rename to __ns_ref
nsfs: port to ns_ref_*() helpers
net: port to ns_ref_*() helpers
uts: port to ns_ref_*() helpers
ipv4: use check_net()
net: use check_net()
net-sysfs: use check_net()
user: port to ns_ref_*() helpers
time: port to ns_ref_*() helpers
pid: port to ns_ref_*() helpers
ipc: port to ns_ref_*() helpers
cgroup: port to ns_ref_*() helpers
...
It's misplaced in struct proc_ns_operations and ns->ops might be NULL if
the namespace is compiled out but we still want to know the type of the
namespace for the initial namespace struct.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Support the generic ns lookup infrastructure to support file handles for
namespaces.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since commit a8bb74acd8 ("rcu: Consolidate RCU-sched update-side function definitions")
there is no difference between rcu_read_lock(), rcu_read_lock_bh() and
rcu_read_lock_sched() in terms of RCU read section and the relevant grace
period. That means that spin_lock(), which implies rcu_read_lock_sched(),
also implies rcu_read_lock().
There is no need no explicitly start a RCU read section if one has already
been started implicitly by spin_lock().
Simplify the code and remove the inner rcu_read_lock() invocation.
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: pengdonglin <pengdonglin@xiaomi.com>
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The bpf_cgroup_from_id kfunc relies on cgroup_get_from_id to obtain the
cgroup corresponding to a given cgroup ID. This helper can be called in
a lot of contexts where the current thread can be random. A recent
example was its use in sched_ext's ops.tick(), to obtain the root cgroup
pointer. Since the current task can be whatever random user space task
preempted by the timer tick, this makes the behavior of the helper
unreliable.
Refactor out __cgroup_get_from_id as the non-namespace aware version of
cgroup_get_from_id, and change bpf_cgroup_from_id to make use of it.
There is no compatibility breakage here, since changing the namespace
against which the lookup is being done to the root cgroup namespace only
permits a wider set of lookups to succeed now. The cgroup IDs across
namespaces are globally unique, and thus don't need to be retranslated.
Reported-by: Dan Schatzberg <dschatzberg@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250915032618.1551762-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The static usage pattern of creating a cgroup, enabling controllers,
and then seeding it with CLONE_INTO_CGROUP doesn't require write
locking cgroup_threadgroup_rwsem and thus doesn't benefit from this
patch.
To avoid affecting other users, the per threadgroup rwsem is only used
when the favordynmods is enabled.
As computer hardware advances, modern systems are typically equipped
with many CPU cores and large amounts of memory, enabling the deployment
of numerous applications. On such systems, container creation and
deletion become frequent operations, making cgroup process migration no
longer a cold path. This leads to noticeable contention with common
process operations such as fork, exec, and exit.
To alleviate the contention between cgroup process migration and
operations like process fork, this patch modifies lock to take the write
lock on signal_struct->group_rwsem when writing pid to
cgroup.procs/threads instead of holding a global write lock.
Cgroup process migration has historically relied on
signal_struct->group_rwsem to protect thread group integrity. In commit
<1ed1328792ff> ("sched, cgroup: replace signal_struct->group_rwsem with
a global percpu_rwsem"), this was changed to a global
cgroup_threadgroup_rwsem. The advantage of using a global lock was
simplified handling of process group migrations. This patch retains the
use of the global lock for protecting process group migration, while
reducing contention by using per thread group lock during
cgroup.procs/threads writes.
The locking behavior is as follows:
write cgroup.procs/threads | process fork,exec,exit | process group migration
------------------------------------------------------------------------------
cgroup_lock() | down_read(&g_rwsem) | cgroup_lock()
down_write(&p_rwsem) | down_read(&p_rwsem) | down_write(&g_rwsem)
critical section | critical section | critical section
up_write(&p_rwsem) | up_read(&p_rwsem) | up_write(&g_rwsem)
cgroup_unlock() | up_read(&g_rwsem) | cgroup_unlock()
g_rwsem denotes cgroup_threadgroup_rwsem, p_rwsem denotes
signal_struct->group_rwsem.
This patch eliminates contention between cgroup migration and fork
operations for threads that belong to different thread groups, thereby
reducing the long-tail latency of cgroup migrations and lowering system
load.
With this patch, under heavy fork and exec interference, the long-tail
latency of cgroup migration has been reduced from milliseconds to
microseconds. Under heavy cgroup migration interference, the multi-CPU
score of the spawn test case in UnixBench increased by 9%.
tj: Update comment in cgroup_favor_dynmods() and switch WARN_ONCE() to
pr_warn_once().
Signed-off-by: Yi Tao <escape@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Later patches will introduce a new parameter `task` to
cgroup_attach_lock, thus adjusting the position of cgroup_attach_lock
within cgroup_procs_write_start.
Between obtaining the threadgroup leader via PID and acquiring the
cgroup attach lock, the threadgroup leader may change, which could lead
to incorrect cgroup migration. Therefore, after acquiring the cgroup
attach lock, we check whether the threadgroup leader has changed, and if
so, retry the operation.
tj: Minor comment adjustments.
Signed-off-by: Yi Tao <escape@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Dynamic cgroup migration involving threadgroup locks can be in one of
two states: no lock held, or holding the global lock. Explicitly
declaring the different lock modes to make the code easier to
understand and facilitates future extensions of the lock modes.
Signed-off-by: Yi Tao <escape@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull for-6.17-fixes to receive 79f919a89c ("cgroup: split
cgroup_destroy_wq into 3 workqueues") to resolve its conflict with
7fa33aa3b0 ("cgroup: WQ_PERCPU added to alloc_workqueue users"). The
latter adds WQ_PERCPU when creating cgroup_destroy_wq and the former splits
the workqueue into three. Resolve by applying WQ_PERCPU to the three split
workqueues.
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to explicitly request the use of
the per-CPU behavior. Both flags coexist for one release cycle to allow
callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, yet nothing in its name tells about that
CPU affinity constraint, which is very often not required by users. Make
it clear by adding a system_percpu_wq.
queue_work() / queue_delayed_work() mod_delayed_work() will now use the
new per-cpu wq: whether the user still stick on the old name a warn will
be printed along a wq redirect to the new one.
This patch add the new system_percpu_wq except for mm, fs and net
subsystem, whom are handled in separated patches.
The old wq will be kept for a few release cylces.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
d8b269e009 ("cgroup: Remove unused cgroup_subsys::post_attach") made $ss
and $ssid unused but didn't drop them leading to compilation warnings. Drop
them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chuyi Zhou <zhouchuyi@bytedance.com>
cgroup_subsys::post_attach callback was introduced in commit 5cf1cacb49
("cgroup, cpuset: replace cpuset_post_attach_flush() with
cgroup_subsys->post_attach callback") and only cpuset would use this
callback to wait for the mm migration to complete at the end of
__cgroup_procs_write(). Since the previous patch defer the flush operation
until returning to userspace, no one use this callback now. Remove this
callback from cgroup_subsys.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There isn't yet a clear way to identify a set of "lost" time that
everyone (or at least a wider group of users) cares about. However,
users can perform some delay accounting by iterating over components of
interest. This patch allows cgroup v2 freezing time to be one of those
components.
Track the cumulative time that each v2 cgroup spends freezing and expose
it to userland via a new local stat file in cgroupfs. Thank you to
Michal, who provided the ASCII art in the updated documentation.
To access this value:
$ mkdir /sys/fs/cgroup/test
$ cat /sys/fs/cgroup/test/cgroup.stat.local
freeze_time_total 0
Ensure consistent freeze time reads with freeze_seq, a per-cgroup
sequence counter. Writes are serialized using the css_set_lock.
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A hung task can occur during [1] LTP cgroup testing when repeatedly
mounting/unmounting perf_event and net_prio controllers with
systemd.unified_cgroup_hierarchy=1. The hang manifests in
cgroup_lock_and_drain_offline() during root destruction.
Related case:
cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event
cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio
Call Trace:
cgroup_lock_and_drain_offline+0x14c/0x1e8
cgroup_destroy_root+0x3c/0x2c0
css_free_rwork_fn+0x248/0x338
process_one_work+0x16c/0x3b8
worker_thread+0x22c/0x3b0
kthread+0xec/0x100
ret_from_fork+0x10/0x20
Root Cause:
CPU0 CPU1
mount perf_event umount net_prio
cgroup1_get_tree cgroup_kill_sb
rebind_subsystems // root destruction enqueues
// cgroup_destroy_wq
// kill all perf_event css
// one perf_event css A is dying
// css A offline enqueues cgroup_destroy_wq
// root destruction will be executed first
css_free_rwork_fn
cgroup_destroy_root
cgroup_lock_and_drain_offline
// some perf descendants are dying
// cgroup_destroy_wq max_active = 1
// waiting for css A to die
Problem scenario:
1. CPU0 mounts perf_event (rebind_subsystems)
2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work
3. A dying perf_event CSS gets queued for offline after root destruction
4. Root destruction waits for offline completion, but offline work is
blocked behind root destruction in cgroup_destroy_wq (max_active=1)
Solution:
Split cgroup_destroy_wq into three dedicated workqueues:
cgroup_offline_wq – Handles CSS offline operations
cgroup_release_wq – Manages resource release
cgroup_free_wq – Performs final memory deallocation
This separation eliminates blocking in the CSS free path while waiting for
offline operations to complete.
[1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers
Fixes: 334c3679ec ("cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends")
Reported-by: Gao Yingjie <gaoyingjie@uniontech.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Suggested-by: Teju Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
One of key items in mprog API is revision for prog list. The revision
number will be increased if the prog list changed, e.g., attach, detach
or replace.
Add 'revisions' field to struct cgroup_bpf, representing revisions for
all cgroup related attachment types. The initial revision value is
set to 1, the same as kernel mprog implementations.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163136.2428732-1-yonghong.song@linux.dev
Pull cgroup updates from Tejun Heo:
- cgroup rstat shared the tracking tree across all controllers with the
rationale being that a cgroup which is using one resource is likely
to be using other resources at the same time (ie. if something is
allocating memory, it's probably consuming CPU cycles).
However, this turned out to not scale very well especially with memcg
using rstat for internal operations which made memcg stat read and
flush patterns substantially different from other controllers. JP
Kobryn split the rstat tree per controller.
- cgroup BPF support was hooking into cgroup init/exit paths directly.
Convert them to use a notifier chain instead so that other usages can
be added easily. The two of the patches which implement this are
mislabeled as belonging to sched_ext instead of cgroup. Sorry.
- Relatively minor cpuset updates
- Documentation updates
* tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier
sched_ext: Introduce cgroup_lifetime_notifier
cgroup: Minor reorganization of cgroup_create()
cgroup, docs: cpu controller's interaction with various scheduling policies
cgroup, docs: convert space indentation to tab indentation
cgroup: avoid per-cpu allocation of size zero rstat cpu locks
cgroup, docs: be specific about bandwidth control of rt processes
cgroup: document the rstat per-cpu initialization
cgroup: helper for checking rstat participation of css
cgroup: use subsystem-specific rstat locks to avoid contention
cgroup: use separate rstat trees for each subsystem
cgroup: compare css to cgroup::self in helper for distingushing css
cgroup: warn on rstat usage by early init subsystems
cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask()
cgroup/rstat: Improve cgroup_rstat_push_children() documentation
cgroup: fix goto ordering in cgroup_init()
cgroup: fix pointer check in css_rstat_init()
cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs
cgroup/cpuset: Fix obsolete comment in cpuset_css_offline()
cgroup/cpuset: Always use cpu_active_mask
...
