amdxdna_cmd_submit() stores current->mm in job->mm without holding any
reference. aie2_sched_job_run() later access job->mm from the DRM
scheduler worker thread. With only a raw pointer and no structural
reference, the mm_struct can be freed before the scheduler runs the job.
Fix this by calling mmgrab() to hold a structural mm_count reference for
the lifetime of the job, paired with mmdrop() in every cleanup path.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260716151305.1595780-1-lizhi.hou@amd.com
fw_log_from_bo() validates the tracing buffer header_size and that the
log fits within the BO, but never checks that log->size is at least
log->header_size. fw_log_print_buffer() then computes:
u32 data_size = log->size - log->header_size;
which underflows to a near-U32_MAX value when firmware reports a log whose
size is smaller than its header. That huge data_size defeats the
log_start/log_end bounds clamps added by commit dd1311bcf0 ("accel/ivpu:
Add bounds checks for firmware log indices"), so fw_log_print_lines() reads
far past the small real data region of the BO. A size of 0 also makes
fw_log_from_bo() advance the offset by 0, causing the callers to loop
forever on the same header.
Reject logs whose size is smaller than the header (which also rejects
size == 0).
Fixes: d4e4257afa ("accel/ivpu: Add firmware tracing support")
Cc: stable@vger.kernel.org
Signed-off-by: Jhonraushan <raushan.jhon@gmail.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260715074206.867712-1-raushan.jhon@gmail.com
amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit()
unconditionally, but only aie2_dev_ops defines that callback.
aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user
AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer
call and oopses the kernel. AIE4 submits work through a mapped user queue
and doorbell, not this ioctl path.
Reject the submission early with -EOPNOTSUPP when the device provides no
cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Cc: stable@vger.kernel.org
Found by 0sec automated security-research tooling (https://0sec.ai).
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260713173030.87541-3-doruk@0sec.ai
amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle
straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle
is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is
skipped, leaving it NULL, and no check rejects it on the user path (the
!job->cmd_bo guard lives inside the != INVALID branch).
The job is then armed and pushed to the DRM scheduler.
aie2_sched_job_run() takes the drv_cmd == NULL path and calls
amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) ->
to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker.
A process with access to the accel node on a system with a probed AMD NPU
can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl
(cmd_handles = 0).
Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO)
legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd.
Reject the invalid handle for user submissions (drv_cmd == NULL) at the
submit choke point so every user path is covered.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Cc: stable@vger.kernel.org
Found by 0sec automated security-research tooling (https://0sec.ai).
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260713173030.87541-2-doruk@0sec.ai
drm-misc-fixes for v7.2-rc3:
- Fix uaf in amdxdna mmap failure path.
- A lot of deadlocks, access races and return value fixes in amdxdna.
- Fix analogix_dp bitshifts during link training.
- Use direct label in drm_exec.
- Fix absent indirect bo handling in v3d.
- Sync on first active crtc in fb_dirty, rather than first crtc.
- Rework try_harder in the buddy allocator.
- Make imagination function static to solve compiler warning.
- Fix imagination error checking.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/71e5b48b-307f-47f5-8fd5-b60ea43e4196@linux.intel.com
Closing a BO handle clears abo->client, while the underlying GEM object
may remain alive due to internal kernel references. As a result, code
executed after the BO handle is closed may dereference a NULL abo->client
pointer.
Remove accesses to abo->client from code paths that may execute after the
BO handle has been closed.
Fixes: d76856beb4 ("accel/amdxdna: Refactor GEM BO handling and add helper APIs for address retrieval")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707201556.562191-1-lizhi.hou@amd.com
The return value of init_srcu_struct() is currently ignored. If
initialization fails, subsequent use of hwctx_srcu may result in invalid
memory accesses.
Check the return value of init_srcu_struct() and propagate the error to
the caller.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707172323.539721-1-lizhi.hou@amd.com
amdxdna_update_heap() iterates over hardware contexts while holding
xdna->dev_lock. During the iteration, amdxdna_pm_resume_get_locked() may
temporarily release and reacquire the lock, allowing hardware contexts to
be modified concurrently.
Fix the race by calling amdxdna_pm_resume_get_locked() before
iterating over hardware contexts.
Fixes: dbc8fd7a03 ("accel/amdxdna: Add expandable device heap support")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707055818.479165-1-lizhi.hou@amd.com
Both amdxdna_hwctx_sync_debug_bo() and amdxdna_drm_config_hwctx_ioctl()
hold xdna->dev_lock while invoking backend operations. If the hardware
hangs, aie2_cmd_wait() blocks waiting for a firmware response. When the
DRM scheduler timeout expires, aie2_sched_job_timedout() is invoked to
reset the hardware. However, the timeout handler also attempts to acquire
dev_lock, resulting in a deadlock.
Avoid this by releasing dev_lock before waiting for the firmware
response and reacquiring it after the wait completes. This allows the
timeout handler to proceed with device recovery when a debug BO command
times out.
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707055732.479103-1-lizhi.hou@amd.com
amdxdna_gem_obj_open() increments open_ref before attempting to set up
the DMA address mapping. When amdxdna_dma_map_bo() fails, the function
returned immediately without rolling back either change made on the first
open (open_ref == 1 path).
Fix it by decrementing open_ref and clearing abo->client on the error path.
Fixes: ece3e89809 ("accel/amdxdna: Allow forcing IOVA-based DMA via module parameter")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707055658.479049-1-lizhi.hou@amd.com
amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove()
before removing the object from abo->mem.umap_list. If
aie2_populate_range() runs concurrently, it may obtain a reference to an
amdxdna_umap that is being released, leading to a potential use-after-free.
Use kref_get_unless_zero() in aie2_populate_range() when acquiring a
reference. If the reference count has already dropped to zero, release
is in progress and the entry is skipped.
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260706221228.434099-1-lizhi.hou@amd.com
amdxdna_hwctx_sync_debug_bo() invokes the hardware hwctx_sync_debug_bo()
callback while holding xdna->dev_lock.
The callback may call amdxdna_cmd_submit(), which in turn calls
amdxdna_pm_resume_get(). If the device is suspended,
amdxdna_pm_resume_get() may synchronously execute amdxdna_pm_resume(),
which also acquires xdna->dev_lock, resulting in a deadlock.
Avoid the deadlock by calling amdxdna_pm_resume_get() before holding
xdna->dev_lock in both amdxdna_hwctx_sync_debug_bo() and
amdxdna_drm_config_hwctx_ioctl()
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260616212429.3620645-1-lizhi.hou@amd.com
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm. This is large for rc2 but it's just a lot of
small fixes across a bunch of drivers, xe, amdgpu as usual, plus some
sashiko-inspired fixes for panthor, and some dma-fence updates.
core:
- kernel doc fix
- include types.h in drm_ras.h
dma-fence:
- fix NULL ptr dereference
- use correct callback
- make dma_fence_dedup_array more robust
dp:
- handle torn down topology gracefully
- fix kernel doc
i915:
- Input validation fixes for BIOS and EDID
- Fix HDCP code buffer overflow and seq_num_v monotonic increase check
- Fix near-NULL deref in i915_active during GFP_ATOMIC exhaustion
xe:
- Wedge from the timeout handler only after releasing the queue
- Fix a NULL pointer dereference
- Remove redundant exec_queue_suspended
- RTP / OA whitelist fixes
- Return error on non-migratable faults requiring devmem
- Skip FORCE_WC and vm_bound check for external dma-bufs
- Hold notifier lock for write on inject test path
- Drop bogus static from finish in force_invalidate
- Fix double-free of managed BO in error path
- Don't attempt to process FAST_REQ or EVENT relays
- Fix NPD in bo_meminfo
- Prevent invalid cursor access for purged BOs
- Fix offset alignment for MERT WHITELST_OA_MERT_MMIO_TRG
amdgpu:
- Soc24 aborted suspend fix
- Drop unecessary BUG() and BUG_ON() from error paths
- SCPM fix
- Power reporting fix
- DCE HDR fix
- UVD boundary checks
- VCN boundary checks
- VCE boundary checks
- DCN 4.2 fixes
- Large stack allocation fixes
- Fix aperture mapping leak
- UserQ fixes
- Ignore_damage_clips fix
- ACP fixes
- DC boundary checks
- GPUVM fixes
- JPEG idle check fixes
- Userptr fix
- GC 11.7 updates
- Non-4K page fix
- SMU 13 fixes
- DP alt mode fix
amdkfd:
- Boundary checks
- CRIU fixes
amdxdna:
- fix device removal issues
- fix use after free in debug BO
imagination:
- fix double call to scheduler fini
- fix ioctl return values
- fix user array stride
virtio:
- handle EDIDs better
panthor:
- irq safe fence lock fix
- reset work fix
- fix invalid pointer
- fix iomem access in suspended state
- sched resume fix
- unplug suspend fix
- drop needless check
- eviction leak fix
- bail on group start/resume fix
- keep irqs masked
malidp:
- use clock bulk API
komeda:
- clock prepare fixes"
* tag 'drm-fixes-2026-07-04' of https://gitlab.freedesktop.org/drm/kernel: (105 commits)
drm/xe/oa: Fix offset alignment for MERT WHITELIST_OA_MERT_MMIO_TRG
drm/xe/pt: prevent invalid cursor access for purged BOs
drm/xe: fix NPD in bo_meminfo()
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
drm/xe/hw_engine: Fix double-free of managed BO in error path
drm/xe/userptr: Drop bogus static from finish in force_invalidate
drm/xe/userptr: Hold notifier_lock for write on inject test path
drm/xe/display: skip FORCE_WC and vm_bound check for external dma-bufs
drm/xe: Return error on non-migratable faults requiring devmem
drm/xe/rtp: Ensure locking/ref counting for OA whitelists
drm/xe/oa: (De-)whitelist OA registers on OA stream open/release
drm/xe/rtp: (De-)whitelist OA registers for all hwe's for a gt
drm/xe/rtp: Toggle 'deny' bit to (de-)whitelist OA regs
drm/xe/rtp: Save OA nonpriv registers to register save/restore lists
drm/xe/rtp: Generalize whitelist_apply_to_hwe
drm/xe/rtp: Keep track of non-OA nonpriv slots
drm/xe/rtp: Maintain OA whitelists separately
drm/xe/rtp: Fix build error with clang < 21 and non-const initializers
drm/imagination: Fix user array stride in pvr_set_uobj_array()
drm/imagination: Fix returned size for DRM_IOCTL_PVR_DEV_QUERY
...
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put.
Cc: stable@vger.kernel.org
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260625113239.49764-1-vulab@iscas.ac.cn
When a debug BO command completes, job->drv_cmd may already have been
freed. Accessing it from aie2_sched_drvcmd_resp_handler() can result in
a use-after-free and memory corruption.
Fix this by introducing reference counting for drv_cmd objects and
transferring ownership to the job while it is in flight. This ensures
that the command remains valid until the completion handler finishes
processing it.
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260701155556.663541-1-lizhi.hou@amd.com
When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If
amdxdna_gem_obj_free() is called after device removal, it may attempt to
access xdna->domain, resulting in a use-after-free.
Fix the race by adding freeing xdna->domain as a managed release action,
so its lifetime is managed by DRM and remains valid until all managed
resources are released.
Fixes: ece3e89809 ("accel/amdxdna: Allow forcing IOVA-based DMA via module parameter")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-3-lizhi.hou@amd.com
amdxdna_remove() destroys notifier_wq. If amdxdna_gem_obj_free() is
called after device removal, it may attempt to flush notifier_wq,
resulting in a use-after-free.
Fix the race by allocating notifier_wq with
drmm_alloc_ordered_workqueue(), so its lifetime is managed by DRM and
remains valid until all managed resources are released.
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-2-lizhi.hou@amd.com
In amdxdna_remove(), all amdxdna_client structures are freed after
calling drm_dev_unplug(). However, drm_dev_unplug() does not force
existing file descriptors to be closed, so amdxdna_drm_close() may be
called after amdxdna_remove() has completed.
As a result, accessing client->pid for debug output in
amdxdna_drm_close() can lead to a use-after-free, since the access is
not protected by drm_dev_enter().
Fix this by decoupling hardware teardown from client cleanup.
amdxdna_remove() only performs hardware-related cleanup, while
per-client resources are released from amdxdna_drm_close() when the
corresponding file is closed.
Fixes: be462c97b7 ("accel/amdxdna: Add hardware context")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260611055150.3070216-1-lizhi.hou@amd.com
Pull drm fixes from Dave Airlie:
"These are just the fixes from our fixes branch, all pretty small and
scattered.
sysfb:
- drm/sysfb truncation and alignment fixes
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix
ivpu:
- fix leak when error handling in ivpu"
* tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel:
drm/sysfb: Avoid truncating maximum stride
drm/sysfb: Return errno code from drm_sysfb_get_visible_size()
drm/sysfb: Avoid possible truncation with calculating visible size
drm/sysfb: Do not page-align visible size of the framebuffer
drm/edid: fix OOB read in drm_parse_tiled_block()
drm/nouveau: fix reversed error cleanup order in ucopy functions
drm/nouveau/acr: fix missing nvkm_done() in error path of nvkm_acr_oneinit()
accel/amdxdna: Use caller client for debug BO sync
drm/displayid: fix Tiled Display Topology ID size
accel/ivpu: fix HWS command queue leak on registration failure
Pull drm updates from Dave Airlie:
"Highlights:
- xe: add initial CRI platform support
- amdgpu: initial HDMI 2.1 FRL support
- rust: add some new type concepts for device lifetimes
- scheduler: moves to a fair algorithm and lots of cleanups
But it's mostly the usual mountain of changes across the board.
core:
- add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD
- change signature of drm_connector_attach_hdr_output_metadata_property
- dedup counter and timestamp retrieval in vblank code
- parse AMD VSDB v3 in CTA extension blocks
- add P230, Y7, XYYY2101010, T430, XVUY210101010 formats
- don't call drop master on file close if not master
- use drm_printf_indent in atomic / bridge
- fix 32b format descriptions
- docs: fix toctree
- hdmi: add common TMDS character rates
- fix drm_syncobj_find_fence leak
rust:
- introduce Higher-Ranked lifetime types
- replace drvdata with scoped registration data
- add GPUVM immediate mode abstraction for rust GPU drivers
- introduce DeviceContext type state for drm::Device
bridge:
- clarify drm_bridge_get/put
- create drm_get_bridge_by_endpoint and use it
- analogix_dp: add panel probing
- ite-it6211 - use drm audio hdmi helpers
buddy:
- add lockdep annotations
dp:
- add PR and VRR updates
- mst: fix buffer overflows
- add Adaptive Sync SDP decoding support
- fix OOB reads in dp-mst
ttm:
- bump fpfn/lpfn to 64-bit
scheduler:
- change default to fair scheduler
- map runqueue 1:1 with scheduler
dma-buf:
- port selftests to kunit
- convert dma-buf system/heap allocators to module
- add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig
udmabuf:
- revert hugetlb support
- fix error with CONFIG_DMA_API_DEBUG
dma-fence:
- fix tracepoints lifetime
- remove unused signal on any support
ras:
- add clear error counter netlink command to drm ras
gpusvm:
- reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- use IOVA allocations
pagemap:
- use IOVA allocations
panels:
- update to use ref counts
- add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1
- add support for waveshare panels
- CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5,
- IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F,
- AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels
- Surface Pro 12 Panel
xe:
- add CRI PCI-IDs
- debugfs add multi-lrc info
- engine init cleanup
- PF fair scheduling auto provisioning
- system controller support for CRI/Xe3p
- PXP state machine fixes
- Reset/wedge/unload corner case fixes
- Wedge path memory allocation fixes
- PAT type cleanups
- Reject unsafe PAT for CPU cached memory
- OA improvements for CRI device memory
- kernel doc syntax in xe headers
- xe_drm.h documentation fixes
- include guard cleanups
- VF CCS memory pool
- i915/xe step unification
- Xe3p GT tuning fixes
- forcewake cleanup in GT and GuC
- admin-only PF mode
- enable hwmon energy attributes for CRI
- enable GT_MI_USER_INTERRUPT
- refactor emit functions
- oa workarounds
- multi_queue: allow QUEUE_TIMESTAMP register
- convert stolen memory to ttm range manager
- use xe2 style blitter as a feature flag
- make drm_driver const
- add/use IRQ page to HW engine definition
- fix oops when display disabled
i915:
- enable PIPEDMC_ERROR interrupt
- more common display code refactoring
- restructure DP/HDMI sink format handling
- eliminate FB usage from lowlevel pinning code
- panel replay bw optimization
- integrate sharpness filter into the scaler
- new fb_pin abstraction for xe/i915 fb transparent handling
- skip inactive MST connectors on HDCP
- start switching to display specific registers
- use polling when irq unavailable
- Adaptive-sync SDP prep
amdgpu:
- use drm_display_info for AMD VSDB data
- Initial HDMI 2.1 FRL support
- Initial DCN 4.2.1 support
- GART fixes for non-4k pages
- GC 11.5.6/SDMA 6.4.0/and other new IPs
- GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes
- Finish support for using multiple SDMA queues for TTM operations
- SWSMU updates
- GC 12.1 updates
- SMU 15.0.8 updates
- DCN 4.2 updates
- DC type conversion fixes
- Enable DC power module
- Replay/PSR updates
- SMU 13.x updates
- Compute queue quantum MQD updates
- ASPM fix
- Align VKMS with common implementation
- DC analog support fixes
- UVD 3 fixes
- TCC harvesting fixes for SI
- GC 11 APU module reload fix
- NBIO 6.3.2 support
- IH 7.1 updates
- DC cursor fixes
- VCN/JPEG user fence fixes
- DC support for connectors without DDC
- Prefer ROM BAR for default VGA device
- DC bandwidth fixes
- Add PTL support for profiler
- Introduce dc_plane_cm and migrate surface update color path
- Add FRL registers for HDMI 2.1
- Restructure VM state machine
- Auxless ALPM support
- GEM_OP locking/warning fixes
- switch to system_dfl_wq
amdkfd:
- GPUVM TLB flush fix
- Hotplug fix
- Boundary check fixes
- SVM fixes
- CRIU fixes
- add profiler API
- MES 12.1 updates
msm:
- core:
- fix shrinker documentation
- IFPC enabled for gen8
- PERFCNTR_CONFIG ioctl support
- GPU:
- reworked UBWC handling
- a810 support
- MDSS:
- add support for Milos platform
- reworked UBWC handling
- DisplayPort:
- reworked HPD handling as prep for MST
- DPU:
- Milos platform support
- reworked UBWC handling
- DSI:
- Milos platform support
nova:
- Hopper/Blackwell enablement (GH100/GB100/GB202)
- FSP support
- 32-bit firmware support
- HAL functions
- refactor GSP boot/unload
- GA100 support
- VBIOS hardening/refactoring
- Adopt higher order lifetime types
tyr:
- define register blocks
- add shmem backed GEM objects
- adopt higher order lifetime types
- move clock cleanup into Drop
radeon:
- Hawaii SMU fixes
- CS parser fix
- use struct drm_edid instead of edid
amdxdna:
- export per-client BO memory via fdinfo
- AIE4 device support
- support medium/lower power modes
- expandable device heap support
- revert read-only user-pointer BO mappings
ivpu:
- support frequency limiting
panthor:
- enable GEM shrinker support
- add eviction and reclaim info to fdinfo
v3d:
- enable runtime PM
mgag200:
- support XRGB1555 + C8
ast:
- support XRGB1555 + C8
- use constants for lots of registers
- fix register handling
imagination:
- fence handling refactoring
nouveau:
- fix sched double call
- expose VBIOS on GSP-RM systems
- add GA100 support
virtio:
- add VIRTIO_GPU_F_BLOB_ALIGNMENT flag
- add deferred mapping support
gud:
- add RCade Display Adapter
hibmc:
- fix no connectors usage
mediatek:
- hdmi: convert error handling
- simplify mtk_crtc allocation
exynos:
- move fbdev emulation to drm client buffers
- use drm format helpers for geometry/size
- adopt core DMA tracking
- fix framebuffer offset handling
renesas:
- add RZ/T2H SOC support
versilicon:
- add cursor plane support
tegra:
- use drm client for framebuffer"
* tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits)
dma-buf: move system_cc_shared heap under separate Kconfig
accel/amdxdna: Clear sva pointer after unbind
agp/amd64: Fix broken error propagation in agp_amd64_probe()
accel/amdxdna: Require carveout when PASID and force_iova are disabled
drm/amdkfd: always resume_all after suspend_all
drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
drm/amd/pm: Use strscpy in profile mode parsing
drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length
drm/amdkfd: fix sysfs topology prop length on buffer truncation
drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages
drm/amd/pm: bound OD parameter parsing to stack array size
drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
drm/amdgpu: validate the mes firmware version for gfx12.1
drm/amdgpu: validate the mes firmware version for gfx12
drm/amdgpu: compare MES firmware version ucode for gfx11
drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS
drm/amdgpu: restart the CS if some parts of the VM are still invalidated
drm/amd/display: use unsigned types for local pipe and REG_GET counters
...
amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's
drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls
amdxdna_hwctx_sync_debug_bo(), but passes abo->client.
amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle
namespace for debug_bo_hdl and as the owner of the hardware context xarray.
Those must match the file that supplied args->handle. The BO's stored
client pointer is object state, not the ioctl context.
Pass filp->driver_priv instead, matching the original handle lookup.
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Cc: stable@vger.kernel.org # v6.19+
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/178155468039.81818.12173237984867749651@gmail.com
A command queue is considered valid and usable by the driver only when
it has a doorbell ID assigned (db_id != 0), meaning both the FW cmdq
creation and doorbell registration completed successfully.
However, when either ivpu_register_db() or set_context_sched_properties()
fails after ivpu_hws_cmdq_init() has already created the cmdq in FW,
the command queue is left registered in FW while the driver treats it as
uninitialized (db_id remains 0). On the next submission attempt the
driver tries to register the same cmdq again, which fails because FW
already has an entry for it.
Fix by calling ivpu_jsm_hws_destroy_cmdq() on error paths to properly
unwind FW state and allow subsequent registration attempts to succeed.
Fixes: 465a3914b2 ("accel/ivpu: Add API for command queue create/destroy/submit")
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260611055140.948684-1-karol.wachowski@linux.intel.com
Add client->sva = NULL after the unbind makes it consistent with how
amdxdna_sva_fini() already clears the pointer after unbinding. The
IS_ERR_OR_NULL guard in sva_fini will then correctly skip the second
unbind.
Fixes: 3cc5d7a595 ("accel/amdxdna: Add carveout memory support for non-IOMMU systems")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260604202815.2425882-1-lizhi.hou@amd.com
The command stream parsing loop increments the index variable a second
time when a 64-bit command word is encountered (bit 14 set), but does
not re-check the loop bound before writing the second word:
for (i = 0; i < size / 4; i++) {
bocmds[i] = cmds[0];
if (cmd & 0x4000) {
i++;
bocmds[i] = cmds[1]; /* unchecked */
}
}
The buffer bocmds is backed by a DMA allocation of exactly size bytes
from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1].
When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is
set, bocmds[size/4-1] is written in bounds, i is then incremented to
size/4, and bocmds[size/4] writes four bytes past the end of the
allocation.
Userspace controls both the buffer contents and the size argument via
the ioctl, making this a userspace-triggerable heap out-of-bounds write.
Fix by checking the incremented index against the buffer bound before
the second write and returning -EINVAL if the buffer is too small to
contain the extended command.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523190843.33977-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
cmd_state_init() initializes the command state with memset(0xff),
leaving dma->len at U64_MAX to signal missing setup. The only setter
is NPU_SET_DMA0_LEN; if userspace omits this command and issues
NPU_OP_DMA_START, dma->len remains U64_MAX.
In dma_length(), a positive stride added to U64_MAX wraps to a small
value. With size0 == 1, check_mul_overflow() does not trigger and
dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check
then passes, region_size[] stays 0, and the bounds check in
ethosu_job.c is bypassed, allowing hardware to execute DMA with stale
physical addresses.
Fix by checking for U64_MAX at the start of dma_length() before any
arithmetic, consistent with the sentinel value used throughout the
driver to detect uninitialized fields.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260524130319.12747-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
dma_length() derives DMA region usage from command stream values and
updates region_size[]:
len = ((len + stride[0]) * size0 + stride[1]) * size1
region_size[region] = max(..., len + dma->offset)
Several arithmetic issues can corrupt the derived region size:
- signed stride values may underflow when added to len
- intermediate multiplications may overflow
- len + dma->offset may overflow during region_size updates
- dma_length() error returns were not validated by the caller
region_size[] is later used by ethosu_job.c to validate command stream
accesses against GEM buffer sizes. Arithmetic wraparound can therefore
under-report region usage and bypass the bounds validation.
Fix by validating signed additions, using overflow helpers for
multiplications and offset updates, and propagating dma_length()
failures to the caller.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260524103710.47397-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
On non-U65 hardware (e.g. U85), opcode 0x4093 is NPU_SET_WEIGHT2_LENGTH.
The BASE handler for the same opcode correctly assigns to
st.weight[2].base, but the LENGTH handler mistakenly assigns cmds[1]
to st.weight[1].length instead of st.weight[2].length.
This leaves weight[2].length at its initialised sentinel value of
0xffffffff and corrupts weight[1].length with the user-supplied value,
breaking the software bounds-check state for both weight buffers on U85.
Fix the index to match the BASE handler.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523210840.92039-3-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
NPU_OP_RESIZE is a U85-only command that the driver does not yet
implement. The existing WARN_ON(1) placeholder fires unconditionally
whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE,
causing unbounded kernel log spam.
If panic_on_warn is set the kernel panics, giving any unprivileged user
with access to the DRM device a trivial denial-of-service primitive.
Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl
rejects the command before it reaches hardware.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523210840.92039-2-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving
a maximum value of 127. However region_size[] and output_region[] in
struct ethosu_validated_cmdstream_info are both sized to
NPU_BASEP_REGION_MAX (8), giving valid indices [0..7].
Every other region assignment in the same switch uses param & 0x7:
NPU_SET_OFM_REGION: st.ofm.region = param & 0x7;
NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7;
NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7;
NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7;
The 0x7f mask on IFM is inconsistent and appears to be a typo.
feat_matrix_length() and calc_sizes() use the region index directly
as an array subscript into the kzalloc'd info struct:
info->region_size[fm->region] = max(...);
A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes
a write up to 127*8 = 1016 bytes past the start of region_size[],
corrupting adjacent kernel heap data.
Fix by applying the same & 0x7 mask used by all other region
assignments.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260523195159.55801-1-meatuni001@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
aie2_sched_job_free() accesses job->drv_cmd for tracing purposes. However,
job->drv_cmd is owned by the caller and may already have been freed when
the job free callback runs, leading to a potential use-after-free.
Remove the job->drv_cmd access from aie2_sched_job_free().
Fixes: 8711eb2dde ("accel/amdxdna: Improve tracing for job lifecycle and mailbox RX worker")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260529152837.1973405-1-lizhi.hou@amd.com
When PASID is not used, the buffer user address is set to
AMDXDNA_INVALID_ADDR. As a result, heap buffer user address validation
fails even though the original userspace address is available.
Preserve the userspace address regardless of PASID usage so heap buffer
address validation works correctly.
Fixes: dbc8fd7a03 ("accel/amdxdna: Add expandable device heap support")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260602040624.2206774-1-lizhi.hou@amd.com
Backmerging to get GEM LRU fixes from commit 379e8f1c ("drm/gem: Make
the GEM LRU lock part of drm_device") and other updates from v7.1-rc5.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Boris Brezillion needs the gem lru fixes 379e8f1ca5 ("drm/gem: Make
the GEM LRU lock part of drm_device") backmerged for drm-misc-next.
That also means we need to sort out the rename conflict in panthor with
the fixup patch from Boris from drm-tip.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
The simple_write_to_buffer() will only initialize data starting from
the *pos offset so if it's non-zero then the first part of the buffer
uninitialized. Really, if *pos is non-zero then this code won't work
so just check for that at the start of the function.
Fixes: 320323d2e5 ("accel/ivpu: Add debugfs interface for setting HWS priority bands")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/ahP24m6Mii9EDL7Q@stanley.mountain
