run_tests() accepts too many optional parameters. Before this modification,
it was required to set all of then when only the last one had to be
changed. That's not clear to see all these 0 and it makes the maintenance
harder:
run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow
Instead, the parameter can be set as an env var with a limited scope:
foo=1 bar=2 next=3 \
run_tests $ns1 $ns2 10.0.1.1 slow
This patch switches to key/value "sflags=*" instead of positional parameter
sflags of do_transfer() and run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-6-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
run_tests() accepts too many optional parameters. Before this modification,
it was required to set all of then when only the last one had to be
changed. That's not clear to see all these 0 and it makes the maintenance
harder:
run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow
Instead, the parameter can be set as an env var with a limited scope:
foo=1 bar=2 next=3 \
run_tests $ns1 $ns2 10.0.1.1 slow
This patch switches to key/value "addr_nr_ns1=*, addr_nr_ns2=*" instead
of positional parameters addr_nr_ns1 and addr_nr_ns2 of do_transfer()
and run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-5-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
run_tests() accepts too many optional parameters. Before this modification,
it was required to set all of then when only the last one had to be
changed. That's not clear to see all these 0 and it makes the maintenance
harder:
run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow
Instead, the parameter can be set as an env var with a limited scope:
foo=1 bar=2 next=3 \
run_tests $ns1 $ns2 10.0.1.1 slow
This patch switches to key/value "test_linkfail=*" instead of positional
parameter test_linkfail of do_transfer() and run_tests().
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-4-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New MPTCP info are being checked in multiple places to improve the code
coverage when using the userspace PM.
This patch makes chk_mptcp_info() more generic to be able to check
subflows, add_addr_signal and add_addr_accepted info (and even more
later). New arguments are now required to get different infos from the
two namespaces because some counters are specific to the client or the
server.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-2-a883213c8ba9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from ipsec, bpf, mptcp and netfilter.
Current release - regressions:
- netfilter: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
- eth: mlx5e:
- fix scheduling of IPsec ASO query while in atomic
- free IRQ rmap and notifier on kernel shutdown
Current release - new code bugs:
- phy: manual remove LEDs to ensure correct ordering
Previous releases - regressions:
- mptcp: fix possible divide by zero in recvmsg()
- dsa: revert "net: phy: dp83867: perform soft reset and retain
established link"
Previous releases - always broken:
- sched: netem: acquire qdisc lock in netem_change()
- bpf:
- fix verifier id tracking of scalars on spill
- fix NULL dereference on exceptions
- accept function names that contain dots
- netfilter: disallow element updates of bound anonymous sets
- mptcp: ensure listener is unhashed before updating the sk status
- xfrm:
- add missed call to delete offloaded policies
- fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets
- selftests: fixes for FIPS mode
- dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling
- eth: sfc: use budget for TX completions
Misc:
- wifi: iwlwifi: add support for SO-F device with PCI id 0x7AF0"
* tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
revert "net: align SO_RCVMARK required privileges with SO_MARK"
net: wwan: iosm: Convert single instance struct member to flexible array
sch_netem: acquire qdisc lock in netem_change()
selftests: forwarding: Fix race condition in mirror installation
wifi: mac80211: report all unusable beacon frames
mptcp: ensure listener is unhashed before updating the sk status
mptcp: drop legacy code around RX EOF
mptcp: consolidate fallback and non fallback state machine
mptcp: fix possible list corruption on passive MPJ
mptcp: fix possible divide by zero in recvmsg()
mptcp: handle correctly disconnect() failures
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
Revert "net: phy: dp83867: perform soft reset and retain established link"
net: mdio: fix the wrong parameters
netfilter: nf_tables: Fix for deleting base chains with payload
netfilter: nfnetlink_osf: fix module autoload
netfilter: nf_tables: drop module reference after updating chain
netfilter: nf_tables: disallow timeout for anonymous sets
netfilter: nf_tables: disallow updates of anonymous sets
...
When building the latest kernel/selftest with clang17 compiler:
make LLVM=1 -j <== for kernel
make -C tools/testing/selftests/bpf LLVM=1 -j <== for selftest
I hit the following compilation error:
[...]
In file included from progs/vrf_socket_lookup.c:3:
In file included from /usr/include/linux/ip.h:21:
In file included from /usr/include/asm/byteorder.h:5:
In file included from /usr/include/linux/byteorder/little_endian.h:13:
/usr/include/linux/swab.h:136:8: error: unknown type name '__always_inline'
136 | static __always_inline unsigned long __swab(const unsigned long y)
| ^
/usr/include/linux/swab.h:171:8: error: unknown type name '__always_inline'
171 | static __always_inline __u16 __swab16p(const __u16 *p)
| ^
/usr/include/linux/swab.h:171:29: error: expected ';' after top level declarator
171 | static __always_inline __u16 __swab16p(const __u16 *p)
| ^
[...]
Basically, with header files in my local host which is based on 5.12 kernel,
__always_inline is not defined and this caused compilation failure.
Since __always_inline is defined in bpf_helpers.h, let us move bpf_helpers.h
to an early position which fixed the problem.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230622061921.816772-1-yhs@fb.com
When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.
If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.
Fix this by setting the neighbor's state to permanent in a couple of
tests, so that it is always valid.
Fixes: 35c31d5c32 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d")
Fixes: 239e754af8 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP MIB counters introduced in commit fc518953bc
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.
If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added recently in the -net tree to
do the required checks and return an error if the counter is not
available.
This commit is similar to the one with the same title applied in the
-net tree but it modifies code only present in net-next for the moment,
see the Fixes commit below.
While at it, we can also remove the use of ${extra_msg} variable which
is never assigned in chk_rm_tx_nr() function and use 'echo' without '-n'
parameter.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 0639fa230a ("selftests: mptcp: add explicit check for new mibs")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The bridge eventually inherits MAC address from its first member, after the
enslavement is acked. A number of (mainly VXLAN) selftests already work
around the problem by setting the MAC address to whatever it will
eventually be anyway. Do the same for this selftest.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge (this holds
for all bridges used here), the bridge MAC address does not have the same
prefix as other interfaces in the system. On Nvidia Spectrum-1 machines all
the RIFs have to have the same 38-bit MAC address prefix. Since the bridge
does not obey this limitation, the RIF cannot be created, and the
enslavement attempt is vetoed on the grounds of the configuration not being
offloadable.
The selftest itself however checks various aspects of VXLAN offloading and
the bridges do not need to participate in routing traffic. The IP addresses
or the RIFs are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in this selftest, thus exempting them from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks vetoing of a different aspect of the
configuration and the bridge does not need to participate in routing
traffic. The IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge (this holds
for both bridges used here), the bridge MAC address does not have the same
prefix as other interfaces in the system. On Nvidia Spectrum-1 machines all
the RIFs have to have the same 38-bit MAC address prefix. Since the bridge
does not obey this limitation, the RIF cannot be created, and the
enslavement attempt is vetoed on the grounds of the configuration not being
offloadable.
The selftest itself however checks traffic prioritization and scheduling,
and the bridges serve for their L2 forwarding capabilities, and do not need
to participate in routing traffic. The IP addresses or the RIFs are
irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in this selftest, thus exempting them from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge (this holds
for both bridges used here), the bridge MAC address does not have the same
prefix as other interfaces in the system. On Nvidia Spectrum-1 machines all
the RIFs have to have the same 38-bit MAC address prefix. Since the bridge
does not obey this limitation, the RIF cannot be created, and the
enslavement attempt is vetoed on the grounds of the configuration not being
offloadable.
The selftest itself however checks traffic prioritization and scheduling,
and the bridges serve for their L2 forwarding capabilities, and do not need
to participate in routing traffic. The IP addresses or the RIFs are
irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in this selftest, thus exempting them from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks DCB DSCP-based prioritization, and the
bridge serves for its L2 forwarding capabilities, and does not need to
participate in routing traffic. The IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks how many mirroring sessions a machine is
capable of offloading. The IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge (this holds
for all bridges used here), the bridge MAC address does not have the same
prefix as other interfaces in the system. On Nvidia Spectrum-1 machines all
the RIFs have to have the same 38-bit MAC address prefix. Since the bridge
does not obey this limitation, the RIF cannot be created, and the
enslavement attempt is vetoed on the grounds of the configuration not being
offloadable.
The selftest itself however checks whether a different vetoed aspect of the
configuration provides an extack. The IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in this selftest, thus exempting them from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
The swp enslavement to the 802.1ad bridge is not allowed, because RIFs are
not allowed to be created for 802.1ad bridges, but the address indicates
one needs to be created. Thus the veto selftests fail already during the
port enslavement. Then the attempt to create a VLAN on top of the same
bridge is not vetoed, because the bridge is not related to mlxsw, and the
selftest fails.
Fix by disabling automatic IPv6 address generation for the bridges in this
selftest, thus exempting them from the mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The bridge eventually inherits MAC address from its first member, after the
enslavement is acked. A number of (mainly VXLAN) selftests already work
around the problem by setting the MAC address to whatever it will
eventually be anyway. Do the same here.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The bridge eventually inherits MAC address from its first member, after the
enslavement is acked. A number of (mainly VXLAN) selftests already work
around the problem by setting the MAC address to whatever it will
eventually be anyway. Do the same for several mirror_gre selftests.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
These two selftests however check mirroring traffic to a gretap netdevice.
The bridge here does not participate in routing traffic and the IP address
or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in these selftests, thus exempting them from mlxsw router
attention. Since the bridges are only used for L2 forwarding, this change
should not hinder usefulness of this selftest for testing SW datapath or HW
datapaths in other devices.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks whether skbedit changes packet priority
as appropriate. The bridge thus does not need to participate in routing
traffic and the IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Since the bridge is only used for L2 forwarding, this change should not
hinder usefulness of this selftest for testing SW datapath or HW datapaths
in other devices.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks operation of pedit on IPv4 and IPv6
dsfield and its parts. The bridge thus does not need to participate in
routing traffic and the IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Since the bridge is only used for L2 forwarding, this change should not
hinder usefulness of this selftest for testing SW datapath or HW datapaths
in other devices.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
This will cause this selftest to fail spuriously. The swp enslavement to
the 802.1ad bridge is not allowed, because RIFs are not allowed to be
created for 802.1ad bridges, but the address indicates one needs to be
created.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
This will cause this selftest to fail spuriously. The swp enslavement to
the 802.1ad bridge is not allowed, because RIFs are not allowed to be
created for 802.1ad bridges, but the address indicates one needs to be
created.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-21
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 181 insertions(+), 15 deletions(-).
The main changes are:
1) Fix a verifier id tracking issue with scalars upon spill,
from Maxim Mikityanskiy.
2) Fix NULL dereference if an exception is generated while a BPF
subprogram is running, from Krister Johansen.
3) Fix a BTF verification failure when compiling kernel with LLVM_IAS=0,
from Florent Revest.
4) Fix expected_attach_type enforcement for kprobe_multi link,
from Jiri Olsa.
5) Fix a bpf_jit_dump issue for x86_64 to pick the correct JITed image,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
selftests/bpf: add a test for subprogram extables
bpf: ensure main program has an extable
bpf: Fix a bpf_jit_dump issue for x86_64 with sysctl bpf_jit_enable.
selftests/bpf: Add test cases to assert proper ID tracking on spill
bpf: Fix verifier id tracking of scalars on spill
====================
Link: https://lore.kernel.org/r/20230621101116.16122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull hotfixes from Andrew Morton:
"19 hotfixes. 8 of these are cc:stable.
This includes a wholesale reversion of the post-6.4 series 'make slab
shrink lockless'. After input from Dave Chinner it has been decided
that we should go a different way [1]"
Link: https://lkml.kernel.org/r/ZH6K0McWBeCjaf16@dread.disaster.area [1]
* tag 'mm-hotfixes-stable-2023-06-20-12-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: fix cross compilation with LLVM
mailmap: add entries for Ben Dooks
nilfs2: prevent general protection fault in nilfs_clear_dirty_page()
Revert "mm: vmscan: make global slab shrink lockless"
Revert "mm: vmscan: make memcg slab shrink lockless"
Revert "mm: vmscan: add shrinker_srcu_generation"
Revert "mm: shrinkers: make count and scan in shrinker debugfs lockless"
Revert "mm: vmscan: hold write lock to reparent shrinker nr_deferred"
Revert "mm: vmscan: remove shrinker_rwsem from synchronize_shrinkers()"
Revert "mm: shrinkers: convert shrinker_rwsem to mutex"
nilfs2: fix buffer corruption due to concurrent device reads
scripts/gdb: fix SB_* constants parsing
scripts: fix the gfp flags header path in gfp-translate
udmabuf: revert 'Add support for mapping hugepages (v4)'
mm/khugepaged: fix iteration in collapse_file
memfd: check for non-NULL file_seals in memfd_create() syscall
mm/vmalloc: do not output a spurious warning when huge vmalloc() fails
mm/mprotect: fix do_mprotect_pkey() limit check
writeback: fix dereferencing NULL mapping->host on writeback_page_template
Pull tracing fixes from Steven Rostedt:
- Fix MAINTAINERS file to point to proper mailing list for rtla and rv
The mailing list pointed to linux-trace-devel instead of
linux-trace-kernel. The former is for the tracing libraries and the
latter is for anything in the Linux kernel tree. The wrong mailing
list was used because linux-trace-kernel did not exist when rtla and
rv were created.
- User events:
- Fix matching of dynamic events to their user events
When user writes to dynamic_events file, a lookup of the
registered dynamic events is made, but there were some cases that
a match could be incorrectly made.
- Add auto cleanup of user events
Have the user events automatically get removed when the last
reference (file descriptor) is closed. This was asked for to
prevent leaks of user events hanging around needing admins to
clean them up.
- Add persistent logic (but not let user space use it yet)
In some cases, having a persistent user event (one that does not
get cleaned up automatically) is useful. But there's still debates
about how to expose this to user space. The infrastructure is
added, but the API is not.
- Update the selftests
Update the user event selftests to reflect the above changes"
* tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/user_events: Document auto-cleanup and remove dyn_event refs
selftests/user_events: Adapt dyn_test to non-persist events
selftests/user_events: Ensure auto cleanup works as expected
tracing/user_events: Add auto cleanup and future persist flag
tracing/user_events: Track refcount consistently via put/get
tracing/user_events: Store register flags on events
tracing/user_events: Remove user_ns walk for groups
selftests/user_events: Add perf self-test for empty arguments events
selftests/user_events: Clear the events after perf self-test
selftests/user_events: Add ftrace self-test for empty arguments events
tracing/user_events: Fix the incorrect trace record for empty arguments events
tracing: Modify print_fields() for fields output order
tracing/user_events: Handle matching arguments that is null from dyn_events
tracing/user_events: Prevent same name but different args event
tracing/rv/rtla: Update MAINTAINERS file to point to proper mailing list
Enables advertisement of the maximum offset supported by the phase control
functionality of PHCs. The callback is used to return an error if an offset
not supported by the PHC is used in ADJ_OFFSET. The ioctls
PTP_CLOCK_GETCAPS and PTP_CLOCK_GETCAPS2 now advertise the maximum offset a
PHC's phase control functionality is capable of supporting. Introduce new
sysfs node, max_phase_adjustment.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Considering that only bench_ringbufs.c supports consumer, just set the
default value of consumer_cnt as 0. After that, update the validity
check of consumer_cnt, remove unused consumer_thread code snippets and
set consumer_cnt as 1 in run_bench_ringbufs.sh accordingly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230613080921.1623219-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When using option -a without --prod-affinity or --cons-affinity, if the
number of producers and consumers is greater than the number of online
CPUs, the benchmark will fail to run as shown below:
$ getconf _NPROCESSORS_ONLN
8
$ ./bench bpf-loop -a -p9
Setting up benchmark 'bpf-loop'...
setting affinity to CPU #8 failed: -22
Fix it by returning the remainder of next_cpu divided by the number of
online CPUs in next_cpu().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230613080921.1623219-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently the MM selftests attempt to work out the target architecture by
using CROSS_COMPILE or otherwise querying the host machine, storing the
target architecture in a variable called MACHINE rather than the usual
ARCH though as far as I can tell (including for x86_64) the value is the
same as we would use for architecture.
When cross compiling with LLVM we don't need a CROSS_COMPILE as LLVM can
support many target architectures in a single build so this logic does not
work, CROSS_COMPILE is not set and we end up selecting tests for the host
rather than target architecture. Fix this by using the more standard ARCH
to describe the architecture, taking it from the environment if specified.
Link: https://lkml.kernel.org/r/20230614-kselftest-mm-llvm-v1-1-180523f277d3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This allows to do more centralized decisions later on, and generally
makes it very explicit which maps are privileged and which are not
(e.g., LRU_HASH and LRU_PERCPU_HASH, which are privileged HASH variants,
as opposed to unprivileged HASH and HASH_PERCPU; now this is explicit
and easy to verify).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-4-andrii@kernel.org
There are some MD5 tests which fail when the kernel is in FIPS mode,
since MD5 is not FIPS compliant. Add a check and only run those tests
if FIPS mode is not enabled.
Fixes: f0bee1ebb5 ("fcnal-test: Add TCP MD5 tests")
Fixes: 5cad8bce26 ("fcnal-test: Add TCP MD5 tests for VRF")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede)
algorithms for performing authentication and encryption, respectively.
This causes the tests to fail when fips=1 is set, since these algorithms
are not allowed in FIPS mode. Therefore, switch from hmac(md5) and
cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant.
Fixes: 3f251d7411 ("selftests: Add tests for vrf and xfrms")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS selftests use the ChaCha20-Poly1305 and SM4 algorithms, which are not
FIPS compliant. When fips=1, this set of tests fails. Add a check and only
run these tests if not in FIPS mode.
Fixes: 4f336e88a8 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests")
Fixes: e506342a03 ("selftests/tls: add SM4 GCM/CCM to tls selftests")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before executing each test from a fixture, FIXTURE_SETUP is run once.
When SKIP is used in FIXTURE_SETUP, the setup function returns early
but the test still proceeds to run, unless another SKIP macro is used
within the test definition, leading to some code repetition. Therefore,
allow tests to be skipped directly from the setup function.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
