ASoC: Fixes for v6.16
A relatively large set of changes, but most of them are quirk
information for various x86 systems. There is one more substantial fix
for a NULL pointer dereference when removing the AVS driver, plus one
for Kconfig dependencies.
The Lenovo Yoga Book 9i GenX has the wrong values in the cirrus,dev-index
_DSD property. Add a fixup for this model to ignore the property and
hardcode the index from the I2C bus address.
The error in the cirrus,dev-index property would prevent the second amp
instance from probing. The component binding would never see all the
required instances and so there would not be a binding between
patch_realtek.c and the cs35l56 driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Brian Howard <blhoward2@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220228
Link: https://patch.msgid.link/20250714110154.204740-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is currently possible to configure a kernel with all Intel SoC
configs as loadable modules, but the board config as built-in. This
causes a link failure in the reference to the snd_soc_sof.ko module:
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_hw_params':
sof_rt5682.c:(.text+0x1f9): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sof_rt5682.c:(.text+0x234): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_codec_init':
sof_rt5682.c:(.text+0x3e0): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cs42l42.o: in function `sof_cs42l42_hw_params':
sof_cs42l42.c:(.text+0x2a): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_nau8825.o: in function `sof_nau8825_hw_params':
sof_nau8825.c:(.text+0x7f): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_da7219.o: in function `da7219_codec_init':
sof_da7219.c:(.text+0xbf): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_maxim_common.o: in function `max_98373_hw_params':
sof_maxim_common.c:(.text+0x6f9): undefined reference to `sof_dai_get_tdm_slots'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1015_hw_params':
sof_realtek_common.c:(.text+0x54c): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1308_hw_params':
sof_realtek_common.c:(.text+0x702): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cirrus_common.o: in function `cs35l41_hw_params':
sof_cirrus_common.c:(.text+0x2f): undefined reference to `sof_dai_get_bclk'
Add an optional dependency on SND_SOC_SOF_INTEL_COMMON, to ensure that whenever
the SOF support is in a loadable module, none of the board code can be built-in.
This may be be a little heavy-handed, but I also don't see a reason why one would
want the boards to be built-in but not the SoC, so it shouldn't actually cause
any usability problems.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250709145626.64125-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_compr_ioctl() ignores the upper 24 bits of the ioctl command
number and only compares the number of the ioctl command, which can
cause unintended behavior if an application tries to use an unsupprted
command that happens to have the same _IOC_NR() value.
Remove the truncation to the low bits and compare the entire ioctl
command code like every other driver does.
Fixes: b21c60a4ed ("ALSA: core: add support for compress_offload")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20250710063059.2683476-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We will copy calibration data from position behind to front.
We have created a variable (tmp_val) point on top of calibration data
buffer, and tmp_val[1] is max of node number in original calibration
data structure, it will be overwritten after first data copy,
so can't be used as max node number check in for loop.
So we create a new variable to save max of node number (tmp_val[1]),
used to check if max node number was reached in for loop.
And a point need to be increased to point at calibration data in node.
Data saved position also need to be increased one byte.
Fixes: 4fe2385134 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250707090513.1462-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return an error from driver probe if the DEVID read from the chip is not
one supported by this driver.
In cs35l56_hw_init() there is a check for valid DEVID, but the invalid
case was returning the value of ret. At this point in the code ret == 0
so the caller would think that cs35l56_hw_init() was successful.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 84851aa055 ("ASoC: cs35l56: Move part of cs35l56_init() to shared library")
Link: https://patch.msgid.link/20250703102521.54204-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously we were filtering out only upper unsupported sampling rates.
This patch adds filtering of the lower unsupported sampling rates. As a
result there is 1:1 mapping between altsetting and supported rates.
The issue was found on a Scarlett 3rd Gen card (see linked bug), but the
same filtering is likely needed for the Scarlett 1st and 2nd Gen as well
as the older Clarett cards which lacks Valid Alternate Setting Control.
Patch was not tested on a real hardware.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214493
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://patch.msgid.link/20250630013357.1327420-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On an imx8mm platform with an external clock provider, when running the
receiver (arecord) and triggering an xrun with xrun_injection, we see a
channel swap/offset. This happens sometimes when running only the
receiver, but occurs reliably if a transmitter (aplay) is also
concurrently running.
It seems that the SAI loses track of frame sync during the trigger stop
-> trigger start cycle that occurs during an xrun. Doing just a FIFO
reset in this case does not suffice, and only a software reset seems to
get it back on track.
This looks like the same h/w bug that is already handled for the
producer case, so we now do the reset unconditionally on config disable.
Signed-off-by: Arun Raghavan <arun@asymptotic.io>
Reported-by: Pieterjan Camerlynck <p.camerlynck@televic.com>
Fixes: 3e3f8bd569 ("ASoC: fsl_sai: fix no frame clk in master mode")
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20250626130858.163825-1-arun@arunraghavan.net
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Fixes for v6.16
A small collection of fixes, the main one being a fix for resume from
hibernation on AMD systems, plus a few new quirk entries for AMD
systems.
In snd_usb_get_audioformat_uac3(), the length value returned from
snd_usb_ctl_msg() is used directly for memory allocation without
validation. This length is controlled by the USB device.
The allocated buffer is cast to a uac3_cluster_header_descriptor
and its fields are accessed without verifying that the buffer
is large enough. If the device returns a smaller than expected
length, this leads to an out-of-bounds read.
Add a length check to ensure the buffer is large enough for
uac3_cluster_header_descriptor.
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com>
Fixes: 9a2fe9b801 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Link: https://patch.msgid.link/20250623-uac3-oob-fix-v1-1-527303eaf40a@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
During the hibernate entry sequence, ACP registers will be reset to
default values and acp ip will be completely powered off including acp
SoundWire pads. During resume sequence, if acp SoundWire pad keeper enable
register is not restored along with pad pulldown control register value,
then SoundWire manager links won't be powered on correctly results in
peripheral register access failures and completely audio function is
broken.
Add code to store the acp SoundWire pad keeper enable register and acp pad
pulldown ctrl register values before entering into suspend state and
restore the register values during resume sequence based on condition check
for acp SoundWire pad keeper enable register for ACP6.3, ACP7.0 & ACP7.1
platforms.
Fixes: 4916283880 ("ASoC: amd: ps: add callback functions for acp pci driver pm ops")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20250623084630.3100279-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With CONFIG_SND_SOC_SM8250=y and CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS=m
selected in kconfig, the build will fail due to trying to link against a
symbol only found in the module.
aarch64-linux-gnu-ld: sound/soc/qcom/sm8250.o: in function `sm8250_snd_exit':
sound/soc/qcom/sm8250.c:52:(.text+0x210): undefined reference to `qcom_snd_usb_offload_jack_remove'
Fix this by declaring the dependency that forces CONFIG_SND_SOC_SM8250=m
when CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS is =m.
Reported-by: Matthew Croughan <matthew.croughan@nix.how>
Fixes: 1b8d0d87b9 ("ASoC: qcom: qdsp6: Add headphone jack for offload connection status")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250617-snd-sm8250-dep-fix-v1-1-879af8906ec4@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Fixes for v6.16
A relatively large collection of fixes and updates that came in since
the merge window. Of note are a couple of Cirrus ones which change the
firmware naming for some newly added devices, and a fix from Laurentiu
for issues booting firmwares on the DSPs on i.MX8 SoCs.
Currently, the DSP core from i.MX8QM/i.MX8QXP is able to operate while the
firmware image is being loaded. Because of this, the DSP may change the
content of the firmware data just after it was loaded, thus leading to the
data having unexpected values when the DSP is reset (via run()).
Fix this by implementing the core_shutdown() operation that will put the
DSP in stall during suspend(). The stall will be removed during the run()
opertion, thus guaranteeing that the DSP core will not be able to run
while the firmware image is being loaded.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250613194310.1128733-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
