Neither ELF spec not ELF loader require program header to be placed right
after ELF header, but build-id code very much assumes such placement:
See
find_get_page(vma->vm_file->f_mapping, 0);
line and checks against PAGE_SIZE.
Returns errors for now until someone rewrites build-id parser
to be more inline with load_elf_binary().
Link: https://lkml.kernel.org/r/d58bc281-6ca7-467a-9a64-40fa214bd63e@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull bcachefs fixes from Kent Overstreet:
"Simple stuff:
- NULL ptr/err ptr deref fixes
- fix for getting wedged on shutdown after journal error
- fix missing recalc_capacity() call, capacity now changes correctly
after a device goes read only
however: our capacity calculation still doesn't take into account
when we have mixed ro/rw devices and the ro devices have data on
them, that's going to be a more involved fix to separate accounting
for "capacity used on ro devices" and "capacity used on rw devices"
- boring syzbot stuff
Slightly more involved:
- discard, invalidate workers are now per device
this has the effect of simplifying how we take device refs in these
paths, and the device ref cleanup fixes a longstanding race between
the device removal path and the discard path
- fixes for how the debugfs code takes refs on btree_trans objects we
have debugfs code that prints in use btree_trans objects.
It uses closure_get() on trans->ref, which is mainly for the cycle
detector, but the debugfs code was using it on a closure that may
have hit 0, which is not allowed; for performance reasons we cannot
avoid having not-in-use transactions on the global list.
Introduce some new primitives to fix this and make the
synchronization here a whole lot saner"
* tag 'bcachefs-2024-06-28' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix kmalloc bug in __snapshot_t_mut
bcachefs: Discard, invalidate workers are now per device
bcachefs: Fix shift-out-of-bounds in bch2_blacklist_entries_gc
bcachefs: slab-use-after-free Read in bch2_sb_errors_from_cpu
bcachefs: Add missing bch2_journal_do_writes() call
bcachefs: Fix null ptr deref in journal_pins_to_text()
bcachefs: Add missing recalc_capacity() call
bcachefs: Fix btree_trans list ordering
bcachefs: Fix race between trans_put() and btree_transactions_read()
closures: closure_get_not_zero(), closure_return_sync()
bcachefs: Make btree_deadlock_to_text() clearer
bcachefs: fix seqmutex_relock()
bcachefs: Fix freeing of error pointers
drm-misc-next for 6.11:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- panic: Monochrome logo support, Various fixes
- ttm: Improve the number of page faults on some platforms, Fix test
build breakage with PREEMPT_RT, more test coverage and various test
improvements
Driver Changes:
- Add missing MODULE_DESCRIPTION where needed
- ipu-v3: Various fixes
- vc4: Monochrome TV support
- bridge:
- analogix_dp: Various improvements and reworks, handle AUX
transfers timeout
- tc358767: Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR, Fix clock
calculations
- panels:
- More transitions to mipi_dsi wrapped functions
- New panels: Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627-congenial-pistachio-nyala-848cf4@houat
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NetDIM library, currently leveraged by an array of NICs, delivers
excellent acceleration benefits. Nevertheless, NICs vary significantly
in their dim profile list prerequisites.
Specifically, virtio-net backends may present diverse sw or hw device
implementation, making a one-size-fits-all parameter list impractical.
On Alibaba Cloud, the virtio DPU's performance under the default DIM
profile falls short of expectations, partly due to a mismatch in
parameter configuration.
I also noticed that ice/idpf/ena and other NICs have customized
profilelist or placed some restrictions on dim capabilities.
Motivated by this, I tried adding new params for "ethtool -C" that provides
a per-device control to modify and access a device's interrupt parameters.
Usage
========
The target NIC is named ethx.
Assume that ethx only declares support for rx profile setting
(with DIM_PROFILE_RX flag set in profile_flags) and supports modification
of usec and pkt fields.
1. Query the currently customized list of the device
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 256, .comps = n/a,},
{.usec = 8, .pkts = 256, .comps = n/a,},
{.usec = 64, .pkts = 256, .comps = n/a,},
{.usec = 128, .pkts = 256, .comps = n/a,},
{.usec = 256, .pkts = 256, .comps = n/a,}
tx-profile: n/a
2. Tune
$ ethtool -C ethx rx-profile 1,1,n_2,n,n_3,3,n_4,4,n_n,5,n
"n" means do not modify this field.
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 1, .comps = n/a,},
{.usec = 2, .pkts = 256, .comps = n/a,},
{.usec = 3, .pkts = 3, .comps = n/a,},
{.usec = 4, .pkts = 4, .comps = n/a,},
{.usec = 256, .pkts = 5, .comps = n/a,}
tx-profile: n/a
3. Hint
If the device does not support some type of customized dim profiles,
the corresponding "n/a" will display.
If the "n/a" field is being modified, -EOPNOTSUPP will be reported.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-4-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DIMLIB's capabilities are supplied by the dim, net_dim, and
rdma_dim objects, and dim's interfaces solely act as a base for
net_dim and rdma_dim and are not explicitly used anywhere else.
rdma_dim is utilized by the infiniband driver, while net_dim
is for network devices, excluding the soc/fsl driver.
In this patch, net_dim relies on some NET's interfaces, thus
DIMLIB needs to explicitly depend on the NET Kconfig.
The soc/fsl driver uses the functions provided by net_dim, so
it also needs to depend on NET.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-3-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Worst case scenario of plist_add() happens when the priority of the
inserted plist_node is going to be the largest after the insertion is
done. The cost is going to be more significant when the original plist is
longer, because the iterator is going to traverse the whole plist to find
the correct position to insert the new node.
The situation can be avoided by using a reverse iterator at the same time,
doing so the maximum possible number of iteration is going to shrink from
N to N/2.
The proposed change of plist_add pasts the test in lib/plist.c to validate
its correctness, also add the worst case scenario test for plist_add() in
plist_test().
The worst case test are tested with the size of test_data and test_node
growing from 200 to 1000. The result are showned in the following table,
in which we can observed that the proposed change of plist_add performs
better than the original version, and the difference between these two
implementations are more significant with the size of N growing.
The random case test [1], and best case test [2] are also provided, with
result showing the proposed change performs slightly better in random case
test while the original implementation performs slightly better in best
case test, while the difference in both test are minor, we can see them as
even in those two situations.
-----------------------------------------------------------
| Test size | 200 | 400 | 600 | 800 | 1000 |
-----------------------------------------------------------
| new_plist_add | 140911| 548681| 1220512| 2048493| 3763755|
-----------------------------------------------------------
| old_plist_add | 188198| 774222| 1643547| 3008929| 4947435|
-----------------------------------------------------------
Link: https://lkml.kernel.org/r/20240614154603.65203-1-richard120310@gmail.com
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Signed-off-by: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
make allmodconfig && make W=1 C=1 reports for lib/*kunit:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/bitfield_kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/checksum_kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/cmdline_kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/is_signed_type_kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/overflow_kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/stackinit_kunit.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Link: https://lkml.kernel.org/r/20240601-md-lib-kunit-tests-v1-1-4493fe0032b9@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/ts_kmp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/ts_bm.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/ts_fsm.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Link: https://lkml.kernel.org/r/20240531-lib-ts-v1-1-03d7f3546c49@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There exists an iteration over a plist in plist_check_list(), and memory
dependency exists between variables "prev", "next" and "prev->next". As
plist is used in the scheduling subsystem, we should guarantee the memory
ordering between multiple processors.
Using macro "WRITE_ONCE()" can help us to ensure the memory ordering as
it was stated in "Documentation/memory-barriers.txt".
Link: https://lkml.kernel.org/r/20240526140139.17220-1-richard120310@gmail.com
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Interrupt disable/enable trips are quite expensive on x86-64 compared to a
mere cmpxchg (note: no lock prefix!) and percpu counters are used quite
often.
With this change I get a bump of 1% ops/s for negative path lookups,
plugged into will-it-scale:
void testcase(unsigned long long *iterations, unsigned long nr)
{
while (1) {
int fd = open("/tmp/nonexistent", O_RDONLY);
assert(fd == -1);
(*iterations)++;
}
}
The win would be higher if it was not for other slowdowns, but one has
to start somewhere.
Link: https://lkml.kernel.org/r/20240528204257.434817-1-mjguzik@gmail.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The addition of an if statement in lib/sort to handle the final unsorted 2
or 3 elements is not covered by existing test cases, leading to incomplete
test coverage. To ensure comprehensive testing and maintain 100% code
coverage, add a new testcase for scenarios where the if statement is
triggered.
Since the if statement is only triggered when the array length is odd and
the first element is greater than the second element, a testcase is
created using an array length of TEST_LEN - 1 and a suitable random seed
to maintain full code coverage.
Link: https://lkml.kernel.org/r/20240527203011.1644280-5-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After building the heap, the code continuously pops two elements from the
heap until only 2 or 3 elements remain, at which point it switches back to
a regular heapsort with one element popped at a time. However, to handle
the final 2 or 3 elements, an additional else-if statement in the while
loop was introduced, potentially increasing branch misses. Moreover, when
there are only 2 or 3 elements left, continuing with regular heapify
operations is unnecessary as these cases are simple enough to be handled
with a single comparison and 1 or 2 swaps outside the while loop.
Eliminating the additional else-if statement and directly managing cases
involving 2 or 3 elements outside the loop reduces unnecessary conditional
branches resulting from the numerous loops and conditionals in heapify.
This optimization maintains consistent numbers of comparisons and swaps
for arrays with even lengths while reducing swaps and comparisons for
arrays with odd lengths from 2.5 swaps and 1 comparison to 1.5 swaps and 1
comparison.
Link: https://lkml.kernel.org/r/20240527203011.1644280-4-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The existing comment in lib/sort refers to glibc qsort() using quicksort.
However, glibc qsort() no longer uses quicksort; it now uses mergesort and
falls back to heapsort if memory allocation for mergesort fails. This
makes the comment outdated and incorrect.
Update the comment to refer to quicksort in general rather than glibc's
implementation to provide accurate information about the comparisons and
trade-offs without implying an outdated implementation.
Link: https://lkml.kernel.org/r/20240527203011.1644280-3-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "lib/sort: Optimizations and cleanups".
This patch series optimizes the handling of the last 2 or 3 elements in
lib/sort and adds a testcase in lib/test_sort to maintain 100% code
coverage reflecting this change. Additionally, it corrects outdated
descriptions regarding glibc qsort() and removes the unused pr_fmt macro.
This patch (of 4):
The pr_fmt macro is defined but not used in lib/sort.c. Since there are
no pr_* functions printing any messages, the pr_fmt macro is redundant and
can be safely removed.
Link: https://lkml.kernel.org/r/20240527203011.1644280-1-visitorckw@gmail.com
Link: https://lkml.kernel.org/r/20240527203011.1644280-2-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KCSAN has identified a potential data race in debugobjects, where the
global variable debug_objects_maxchain is accessed for both reading and
writing simultaneously in separate and parallel data paths. This results in
the following splat printed by KCSAN:
BUG: KCSAN: data-race in debug_check_no_obj_freed / debug_object_activate
write to 0xffffffff847ccfc8 of 4 bytes by task 734 on cpu 41:
debug_object_activate (lib/debugobjects.c:199 lib/debugobjects.c:564 lib/debugobjects.c:710)
call_rcu (kernel/rcu/rcu.h:227 kernel/rcu/tree.c:2719 kernel/rcu/tree.c:2838)
security_inode_free (security/security.c:1626)
__destroy_inode (./include/linux/fsnotify.h:222 fs/inode.c:287)
...
read to 0xffffffff847ccfc8 of 4 bytes by task 384 on cpu 31:
debug_check_no_obj_freed (lib/debugobjects.c:1000 lib/debugobjects.c:1019)
kfree (mm/slub.c:2081 mm/slub.c:4280 mm/slub.c:4390)
percpu_ref_exit (lib/percpu-refcount.c:147)
css_free_rwork_fn (kernel/cgroup/cgroup.c:5357)
...
value changed: 0x00000070 -> 0x00000071
The data race is actually harmless as this is just used for debugfs
statistics, as all other debug variables.
Annotate all debug variables as racy explicitly, since these variables
are known to be racy and harmless.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240611091813.1189860-1-leitao@debian.org
Provide new primitives for solving a lifetime issue with bcachefs
btree_trans objects.
closure_sync_return(): like closure_sync(), wait synchronously for any
outstanding gets. like closure_return, the closure is considered
"finished" and the ref left at 0.
closure_get_not_zero(): get a ref on a closure if it's alive, i.e. the
ref is not zero.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull bcachefs fixes from Kent Overstreet:
"Lots of (mostly boring) fixes for syzbot bugs and rare(r) CI bugs.
The LRU_TIME_BITS fix was slightly more involved; we only have 48 bits
for the LRU position (we would prefer 64), so wraparound is possible
for the cached data LRUs on a filesystem that has done sufficient
(petabytes) reads; this is now handled.
One notable user reported bugfix, where we were forgetting to
correctly set the bucket data type, which should have been
BCH_DATA_need_gc_gens instead of BCH_DATA_free; this was causing us to
go emergency read-only on a filesystem that had seen heavy enough use
to see bucket gen wraparoud.
We're now starting to fix simple (safe) errors without requiring user
intervention - i.e. a small incremental step towards full self
healing.
This is currently limited to just certain allocation information
counters, and the error is still logged in the superblock; see that
patch for more information. ("bcachefs: Fix safe errors by default")"
* tag 'bcachefs-2024-06-22' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Move the ei_flags setting to after initialization
bcachefs: Fix a UAF after write_super()
bcachefs: Use bch2_print_string_as_lines for long err
bcachefs: Fix I_NEW warning in race path in bch2_inode_insert()
bcachefs: Replace bare EEXIST with private error codes
bcachefs: Fix missing alloc_data_type_set()
closures: Change BUG_ON() to WARN_ON()
bcachefs: fix alignment of VMA for memory mapped files on THP
bcachefs: Fix safe errors by default
bcachefs: Fix bch2_trans_put()
bcachefs: set_worker_desc() for delete_dead_snapshots
bcachefs: Fix bch2_sb_downgrade_update()
bcachefs: Handle cached data LRU wraparound
bcachefs: Guard against overflowing LRU_TIME_BITS
bcachefs: delete_dead_snapshots() doesn't need to go RW
bcachefs: Fix early init error path in journal code
bcachefs: Check for invalid btree IDs
bcachefs: Fix btree ID bitmasks
bcachefs: Fix shift overflow in read_one_super()
bcachefs: Fix a locking bug in the do_discard_fast() path
...
With ARCH=arm, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/crypto/libsha256.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes sha1.c and utils.c which, although they did not produce
a warning with the arm allmodconfig configuration, may cause this
warning with other configurations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
