This is one of the hackiest Alpha machines, and the only one without
PCI support. Removing this allows cleaning up code in eise and tty
drivers in addition to the architecture code.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We want the tty fixes in here as well, and it resolves a merge conflict
in:
drivers/tty/serial/serial_core.c
as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a large patch but is only additions. All changes and removals
are made in previous patches in this series.
- Add CTI board_init and port setup functions for each UART type
- Add CTI_EXAR_DEVICE() and CTI_PCI_DEVICE() macros
- Add support for reading a word from the Exar EEPROM.
- Add support for configuring and setting a single MPIO
- Add various helper functions for CTI boards.
- Add osc_freq to struct exar8250
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/ae4a66e7342b686cb8d4b15317585dfb37222cf4.1713382717.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pengfei Xu reports, that the -next commit 1788cf6a91 (tty: serial:
switch from circ_buf to kfifo) tries to emit a WARNING and that leads to
lockdep errors. Obviously we cannot print anything from uart_put_char()!
This WARN_ON_ONCE() was/is a debug aid to check if the condition in
uart_put_char() can happen at all. Pengfei Xu confirmed it can. Unlike
me and kbuild bot in my queue.
Second, I completely forgot about it, so I did not remove it in the
final version, nor mentioned it in the commit log.
Drop it now as we are all good. And we even have stack traces (and a
reproducer)!
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20240416071904.21440-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek reports, that the -next commit 1788cf6a91 (tty: serial: switch
from circ_buf to kfifo) broke meson_uart and qcom_geni_serial. The
commit mistakenly advanced the kfifo twice: once by
uart_fifo_get()/kfifo_out() and second time by uart_xmit_advance().
To advance the fifo only once, drop the superfluous uart_xmit_advance()
from both.
To count the TX statistics properly, use uart_fifo_out() in
qcom_geni_serial (meson_uart_start_tx() already uses that).
I checked all other uses of uart_xmit_advance() and they appear correct:
either they are finishing DMA transfers or are after peek/linear_ptr
(i.e. they do not advance fifo).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 1788cf6a91 ("tty: serial: switch from circ_buf to kfifo")
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240416054825.6211-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When terminal is unresponsive, one cannot use dmesg to view
the printk ring buffer messages. Also, syslog services may be
disabled, especially on embedded systems, to check the messages
after a reboot. In this scenario, replay the messages in printk
ring buffer on consoles via sysrq by pressing sysrq+R.
The console loglevel will determine which all kernel log messages
are displayed. The messages will be displayed only when
console_trylock() succeeds. Users could repeat the sysrq key when
it fails. If the owner of console subsystem lock is stuck,
repeating the key won't work.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shimoyashiki Taichi <taichi.shimoyashiki@sony.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Sreenath Vijayan <sreenath.vijayan@sony.com>
Link: https://lore.kernel.org/r/cc3b9b1aae60a236c6aed1dc7b0ffa2c7cd1f183.1710220326.git.sreenath.vijayan@sony.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are seeing start_tx being called after port shutdown as noted by Jiri.
This happens because we are missing the startup and shutdown related
functions for the serial base port.
Let's fix the issue by adding startup and shutdown functions for the
serial base port to block tx flushing for the serial base port when the
port is not in use.
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable <stable@kernel.org>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240411055848.38190-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable tmout is being assigned a value that is never read, it is
being re-assinged in the following for-loop statement. The assignment
is redundant and can be removed.
Cleans up clang scan warning:
drivers/tty/serial/omap-serial.c:1096:3: warning: Value stored to 'tmout'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240411085537.306020-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to inline serial_base_add_isa_preferred_console() based on
CONFIG_SERIAL_8250_CONSOLE and not based on CONFIG_SERIAL_CORE_CONSOLE.
Otherwise we can get the follwoing error as noted by Stephen:
ERROR: modpost: "serial_base_add_isa_preferred_console"
[drivers/tty/serial/8250/8250.ko] undefined!
We also have a duplicate inlined serial_base_add_isa_preferred_console(),
in serial_base_bus.c added by the same commit by accident, let's drop it.
Fixes: a8b04cfe7d ("serial: 8250: Add preferred console in serial8250_isa_init_ports()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240411080622.11929-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split the common code from sc16is7xx driver and move the I2C and SPI bus
parts into interface-specific source files.
sc16is7xx becomes the core functions which can support multiple bus
interfaces like I2C and SPI.
No functional changes intended.
Also simplify and improve Kconfig entries.
- Capitalize SPI keyword for consistency
- Display list of supported ICs each on a separate line (and aligned) to
facilitate locating a specific IC model
- Add Manufacturer name at start of description string
- Add UART keyword to description string
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240409154253.3043822-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The circular buffer is NULLified in uart_tty_port_shutdown()
under the spin lock. However, the PM or other timer based callbacks
may still trigger after this event without knowning that buffer pointer
is not valid. Since the serial code is a bit inconsistent in checking
the buffer state (some rely on the head-tail positions, some on the
buffer pointer), it's better to have both aligned, i.e. buffer pointer
to be NULL and head-tail possitions to be the same, meaning it's empty.
This will prevent asynchronous calls to dereference NULL pointer as
reported recently in 8250 case:
BUG: kernel NULL pointer dereference, address: 00000cf5
Workqueue: pm pm_runtime_work
EIP: serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809)
...
? serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809)
__start_tx (drivers/tty/serial/8250/8250_port.c:1551)
serial8250_start_tx (drivers/tty/serial/8250/8250_port.c:1654)
serial_port_runtime_suspend (include/linux/serial_core.h:667 drivers/tty/serial/serial_port.c:63)
__rpm_callback (drivers/base/power/runtime.c:393)
? serial_port_remove (drivers/tty/serial/serial_port.c:50)
rpm_suspend (drivers/base/power/runtime.c:447)
The proposed change will prevent ->start_tx() to be called during
suspend on shut down port.
Fixes: 43066e3222 ("serial: port: Don't suspend if the port is still busy")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404031607.2e92eebe-lkp@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240404150034.41648-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
