Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations, it is unnecessary to go through the
crypto API. Just use crc32c(). This is much simpler, and it improves
performance due to eliminating the crypto API overhead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20250207041724.70733-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the cxlflash driver for IBM CAPI Flash devices.
The cxlflash driver has received minimal maintenance for some time, and
the CAPI Flash hardware that uses it is no longer commercially available.
Thanks to Uma Krishnan, Matthew Ochs and Manoj Kumar for their work on
this driver over the years.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20250203072801.365551-2-ajd@linux.ibm.com
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Block layer integrity configuration is a bit complex right now, as it
indirects through operation vectors for a simple two-dimensional
configuration:
a) the checksum type of none, ip checksum, crc, crc64
b) the presence or absence of a reference tag
Remove the integrity profile, and instead add a separate csum_type flag
which replaces the existing ip-checksum field and a new flag that
indicates the presence of the reference tag.
This removes up to two layers of indirect calls, remove the need to
offload the no-op verification of non-PI metadata to a workqueue and
generally simplifies the code. The downside is that block/t10-pi.c now
has to be built into the kernel when CONFIG_BLK_DEV_INTEGRITY is
supported. Given that both nvme and SCSI require t10-pi.ko, it is loaded
for all usual configurations that enabled CONFIG_BLK_DEV_INTEGRITY
already, though.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240613084839.1044015-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull more SCSI updates from James Bottomley:
"The vfs has long had a write lifetime hint mechanism that gives the
expected longevity on storage of the data being written. f2fs was the
original consumer of this and used the hint for flash data placement
(mostly to avoid write amplification by placing objects with similar
lifetimes in the same erase block).
More recently the SCSI based UFS (Universal Flash Storage) drivers
have wanted to take advantage of this as well, for the same reasons as
f2fs, necessitating plumbing the write hints through the block layer
and then adding it to the SCSI core.
The vfs write_hints already taken plumbs this as far as block and this
completes the SCSI core enabling based on a recently agreed reuse of
the old write command group number. The additions to the scsi_debug
driver are for emulating this property so we can run tests on it in
the absence of an actual UFS device"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Maintain write statistics per group number
scsi: scsi_debug: Implement GET STREAM STATUS
scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page
scsi: scsi_debug: Allocate the MODE SENSE response from the heap
scsi: scsi_debug: Rework subpage code error handling
scsi: scsi_debug: Rework page code error handling
scsi: scsi_debug: Support the block limits extension VPD page
scsi: scsi_debug: Reduce code duplication
scsi: sd: Translate data lifetime information
scsi: scsi_proto: Add structures and constants related to I/O groups and streams
scsi: core: Query the Block Limits Extension VPD page
Pull SCSI updates from James Bottomley:
"Only a couple of driver updates this time (lpfc and mpt3sas) plus the
usual assorted minor fixes and updates. The major core update is a set
of patches moving retries out of the drivers and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (84 commits)
scsi: core: Constify the struct device_type usage
scsi: libfc: replace deprecated strncpy() with memcpy()
scsi: lpfc: Replace deprecated strncpy() with strscpy()
scsi: bfa: Fix function pointer type mismatch for state machines
scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
scsi: bfa: Remove additional unnecessary struct declarations
scsi: csiostor: Avoid function pointer casts
scsi: qla1280: Remove redundant assignment to variable 'mr'
scsi: core: Make scsi_bus_type const
scsi: core: Really include kunit tests with SCSI_LIB_KUNIT_TEST
scsi: target: tcm_loop: Make tcm_loop_lld_bus const
scsi: scsi_debug: Make pseudo_lld_bus const
scsi: iscsi: Make iscsi_flashnode_bus const
scsi: fcoe: Make fcoe_bus_type const
scsi: lpfc: Copyright updates for 14.4.0.0 patches
scsi: lpfc: Update lpfc version to 14.4.0.0
scsi: lpfc: Change lpfc_vport load_flag member into a bitmask
scsi: lpfc: Change lpfc_vport fc_flag member into a bitmask
scsi: lpfc: Protect vport fc_nodes list with an explicit spin lock
scsi: lpfc: Change nlp state statistic counters into atomic_t
...
I have an Iomega Z100P2 zip drive, but it does not work with my StarTech
PEX1P2 AX99100 PCIe parallel port, which evidently does not support 16-bit
or 32-bit EPP. Currently the only way to tell the PPA driver to use 8-bit
EPP is to write 'mode=3' to /proc/scsi/ppa/*, but the driver doesn't
actually distinguish between the three EPP modes and still tries to use
16-bit or 32-bit EPP. And even if writing to that file did make the driver
use 8-bit EPP, it still wouldn't do me any good because by the time that
file exists, the drive has already failed to initialize.
Add a new parameter /sys/module/ppa/mode to set the transfer mode before
initializing the drive. This parameter replaces the use of
CONFIG_SCSI_IZIP_EPP16 in the PPA driver.
At the same time, default to 8-bit EPP. 16-bit and 32-bit EPP are not
necessary for the drive to function, nor are they part of the IEEE 1284
standard, so the driver should not assume that they are available.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://lore.kernel.org/r/20230807155856.362864-2-alexhenrie24@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SCSI_MOD is a helper config symbol for configuring RAID_ATTRS properly,
i.e., RAID_ATTRS needs to be m when SCSI=m.
This helper config symbol SCSI_MOD still shows up even in kernel
configurations that do not select the block subsystem and where SCSI is not
even a configuration option mentioned and selectable.
Make this SCSI_MOD depend on BLOCK, so that it only shows up when it is
slightly relevant in the kernel configuration.
Link: https://lore.kernel.org/r/20220919060112.24802-1-lukas.bulwahn@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The BusLogic driver is the last remaining driver that relies on the
deprecated bus_to_virt() function, which in turn only works on a few
architectures, and is incompatible with both swiotlb and iommu support.
Before commit 391e2f2560 ("[SCSI] BusLogic: Port driver to 64-bit."), the
driver had a dependency on x86-32, presumably because of this
problem. However, the change introduced another bug that made it still
impossible to use the driver on any 64-bit machine.
This was in turn fixed in commit 56f396146a ("scsi: BusLogic: Fix 64-bit
system enumeration error for Buslogic"), 8 years later, which shows that
there are not a lot of users.
Maciej is still using the driver on 32-bit hardware, and Khalid mentioned
that the driver works with the device emulation used in VirtualBox and
VMware. Both of those only emulate it for Windows 2000 and older operating
systems that did not ship with the better LSI logic driver.
Do a minimum fix that searches through the list of descriptors to find one
that matches the bus address. This is clearly as inefficient as was
indicated in the code comment about the lack of a bus_to_virt()
replacement. A better fix would likely involve changing out the entire
descriptor allocation for a simpler one, but that would be much more
invasive.
Link: https://lore.kernel.org/r/20220624155226.2889613-2-arnd@kernel.org
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Matt Wang <wwentao@vmware.com>
Tested-by: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
CONFIG_BLK_SCSI_REQUEST is rather misnamed as it enables building a small
amount of code shared by the SCSI initiator, target, and consumers of the
scsi_request passthrough API. Rename it and also allow building it as a
module.
[mkp: add module license]
Link: https://lore.kernel.org/r/20210724072033.1284840-20-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit d2bcbeab42 ("scsi: blkcg: Add app identifier support for
blkcg") introduced an FC_APPID config option under SCSI. However, the
added config option is not used anywhere. Simply remove it.
The block layer BLK_CGROUP_FC_APPID config option is what actually
controls whether the application ID code should be built or not. Make
this option dependent on NVMe over FC since that is currently the only
transport which supports the capability.
Fixes: d2bcbeab42 ("scsi: blkcg: Add app identifier support for blkcg")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lpfc depends on irq_poll library, but it is not selected automatically.
When irq_poll is not selected, compiling it can run into following error
ERROR: modpost: "irq_poll_init" [drivers/scsi/lpfc/lpfc.ko] undefined!
ERROR: modpost: "irq_poll_sched" [drivers/scsi/lpfc/lpfc.ko] undefined!
ERROR: modpost: "irq_poll_complete" [drivers/scsi/lpfc/lpfc.ko] undefined!
Link: https://lore.kernel.org/r/20210126000554.309858-1-ztong0001@gmail.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The gdth driver refers to a SCSI parallel, PCI-only HBA RAID adapter which
was manufactured by the now-defunct ICP Vortex company, later acquired by
Adaptec and superseded by the aacraid series of controllers. The driver
itself would require a major overhaul before any modifications can be
attempted, but seeing that it's unlikely to have any users left it should
rather be removed completely.
Link: https://lore.kernel.org/r/20210113090500.129644-2-hare@suse.de
Cautiously-Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
IBM decided to retire a lot of the content that was previously hosted on
"developerworks", and so some of the links we've used for documentation are
now dead or redirect to some general landing page with no correlation to
what the links were meant to provide.
Change the provided link in the Kconfig file for zfcp to rather refer to
our device drivers book that we regularly update and publish for free, and
whose name hasn't been changed since it was first published.
Our hardware is also not called "IBM eServer zSeries" anymore - in fact, it
hasn't been called like that since 2006. Use a broader term that covers
different server names over time.
Lastly, add a short paragraph about how our HBAs are typically named, to
have some more tangible references.
Link: https://lore.kernel.org/r/96069b9f4c4f056a515b37e89b2bdfccc282e3d3.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
There is no reason to expose SATA_PMP config option when no SATA
host drivers are enabled. To fix it add SATA_HOST config option,
make all SATA host drivers select it and finally make SATA_PMP
config options depend on it.
This also serves as preparation for the future changes which
optimize libata core code size on PATA only setups.
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
