Remove the retry of the get protocol info command. It is not needed
anymore, because RWSIG continue command is send before start of the
probing. That assures the EC device is ready in RW and there is no
need to try again because FPMCU is not fully booted.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Link: https://lore.kernel.org/r/20241206091514.2538350-3-dawidn@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
There are EC devices, like FPMCU, that use RWSIG as a method of
authenticating RW section. After the authentication succeeds, EC device
waits some time before jumping to RW. EC can be probed before the jump,
which means there is a time window after jump to RW in which EC won't
respond, because it is not initialized. It can cause a communication
errors after probing.
To avoid such problems, send the RWSIG continue command first, which
skips waiting for the jump to RW. Send the command more times, to make
sure EC is ready in RW before the start of the actual probing process. If
a EC device doesn't support the RWSIG, it will respond with invalid
command error code and probing will continue as usual.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Link: https://lore.kernel.org/r/20241206091514.2538350-2-dawidn@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The HP OMEN 8 (2022), corresponding to a board ID of 8A15, supports OMEN
thermal profile and requires the timed profile quirk.
Upon adding this ID to both the omen_thermal_profile_boards and
omen_timed_thermal_profile_boards, significant bump in performance can be
observed. For instance, SilverBench (https://silver.urih.com/) results
improved from ~56,000 to ~69,000, as a result of higher power draws (and
thus core frequencies) whilst under load:
Package Power:
- Before the patch: ~65W (dropping to about 55W under sustained load).
- After the patch: ~115W (dropping to about 105W under sustained load).
Core Power:
- Before: ~60W (ditto above).
- After: ~108W (ditto above).
Add 8A15 to omen_thermal_profile_boards and
omen_timed_thermal_profile_boards to improve performance.
Signed-off-by: Xi Xiao <1577912515@qq.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://lore.kernel.org/r/20241226062207.3352629-1-jeffbai@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull chrome platform fix from Tzung-Bi Shih:
- Fix wrong product names for early Framework Laptops
* tag 'chrome-platform-for-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_lpc: fix product identity for early Framework Laptops
Altmodes with cros_ec are either automatically entered by the EC or
entered by the AP if TBT or USB4 are supported on the system. Due to the
security risk of PCIe tunneling, TBT modes should not be auto entered by
the kernel at this time and will require user intervention.
With this change, a userspace program will need to explicitly activate
the thunderbolt mode on the port and partner in order to enter the mode
and the thunderbolt driver will not automatically enter when a partner
is connected.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20241213153543.v5.8.Ic14738918e3d026fa2d85e95fb68f8e07a0828d0@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull ACPI fix from Rafael Wysocki:
"Unbreak ACPI EC support on LoongArch that has been broken earlier in
this development cycle (Huacai Chen)"
* tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Enable EC support on LoongArch by default
mlxplat_pci_fpga_device_init() calls pci_get_device() but does not
release the refcount on error path. Call pci_dev_put() on the error path
and in mlxplat_pci_fpga_device_exit() to fix this.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 02daa222fb ("platform: mellanox: Add initial support for PCIe based programming logic device")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20241216022538.381209-1-joe@pf.is.s.u-tokyo.ac.jp
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The driver now fails to link when the power supply core is missing
or in a loadable module:
_64-linux/bin/x86_64-linux-ld: drivers/platform/x86/intel/bytcrc_pwrsrc.o: in function `crc_pwrsrc_irq_handler':
bytcrc_pwrsrc.c:(.text+0x2aa): undefined reference to `power_supply_changed'
x86_64-linux-ld: drivers/platform/x86/intel/bytcrc_pwrsrc.o: in function `crc_pwrsrc_psy_get_property':
bytcrc_pwrsrc.c:(.text+0x2f6): undefined reference to `power_supply_get_drvdata'
x86_64-linux-ld: drivers/platform/x86/intel/bytcrc_pwrsrc.o: in function `crc_pwrsrc_probe':
bytcrc_pwrsrc.c:(.text+0x644): undefined reference to `devm_power_supply_register'
Add the appropriate dependency for it.
Fixes: 0130ec83c5 ("platform/x86/intel: bytcrc_pwrsrc: Optionally register a power_supply dev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241216083409.1885677-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Various Dell laptops have an lis3lv02d freefall/accelerometer sensor.
The lis3lv02d chip has an interrupt line as well as an I2C connection to
the system's main SMBus.
The lis3lv02d is described in the ACPI tables by an SMO88xx ACPI device,
but the SMO88xx ACPI fwnodes are incomplete and only list an IRQ resource.
So far this has been worked around with some SMO88xx specific quirk code
in the generic i2c-i801 driver, but it is not necessary to handle the Dell
specific instantiation of i2c_client-s for SMO88xx ACPI devices there.
The kernel already instantiates platform_device-s for these with an
acpi:SMO88xx modalias. The drivers/platform/x86/dell/dell-smo8800.c
driver binds to this platform device but this only deals with
the interrupt resource. Add a drivers/platform/x86/dell/dell-lis3lv02d.c
which will matches on the same acpi:SMO88xx modaliases and move
the i2c_client instantiation from the generic i2c-i801 driver there.
Moving the i2c_client instantiation has the following advantages:
1. This moves the SMO88xx ACPI device quirk handling away from the generic
i2c-i801 module which is loaded on all Intel x86 machines to a module
which will only be loaded when there is an ACPI SMO88xx device.
2. This removes the duplication of the SMO88xx ACPI Hardware ID (HID) table
between the i2c-i801 and dell-smo8800 drivers.
3. This allows extending the quirk handling by adding new code and related
module parameters to the dell-lis3lv02d driver, without needing to modify
the i2c-i801 code.
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20241209183557.7560-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
W=1 build triggers this warning:
drivers/platform/x86/intel/plr_tpmi.c:315:55: error: ‘snprintf’ output
may be truncated before the last format character
[-Werror=format-truncation=]
315 | snprintf(name, sizeof(name), "domain%d", i);
| ^
drivers/platform/x86/intel/plr_tpmi.c:315:17: note: ‘snprintf’ output
between 8 and 17 bytes into a destination of size 16
315 | snprintf(name, sizeof(name), "domain%d", i);
Inspecting the code tells that maximum i in intel_plr_probe() will fit
into u8 because it comes from:
struct intel_tpmi_pfs_entry {
...
u64 num_entries:8;
...but compiler does not know that. Saving one byte in name[] at the
expense of a warning with W=1 seems a bad trade so simply make it
name[17].
Link: https://lore.kernel.org/r/20241210140115.1375-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi:
- Add support for Alienware m16 R1 AMD
- Do not setup legacy LED control with X and G Series
- intel/ifs: Clearwater Forest support
- intel/vsec: Panther Lake support
- p2sb: Do not hide the device if BIOS left it unhidden
- touchscreen_dmi: Add SARY Tab 3 tablet information
* tag 'platform-drivers-x86-v6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/vsec: Add support for Panther Lake
platform/x86/intel/ifs: Add Clearwater Forest to CPU support list
platform/x86: touchscreen_dmi: Add info for SARY Tab 3 tablet
p2sb: Do not scan and remove the P2SB device when it is unhidden
p2sb: Move P2SB hide and unhide code to p2sb_scan_and_cache()
p2sb: Introduce the global flag p2sb_hidden_by_bios
p2sb: Factor out p2sb_read_from_cache()
alienware-wmi: Adds support to Alienware m16 R1 AMD
alienware-wmi: Fix X Series and G Series quirks
After looking at the ACPI AML code, it seems that the command 0x0000
used with ACER_WMID_GET_GAMING_SYS_INFO_METHODID returns a bitmap of
all supported sensor indices available through the 0x0001 command.
Those sensor indices seem to include both temperature and fan speed
sensors, with only the fan speed sensors being currently supported.
Use the output of this new command to implement reliable sensor
detection. This fixes detection of fans which do not spin during
probe, as fans are currently being ignored if their speed is 0.
Also add support for the new temperature sensor ids.
Tested-by: Rayan Margham <rayanmargham4@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241210001657.3362-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
