Convert ssram device related functionalities to a new driver named Intel
PMC SSRAM Telemetry driver. Modify PMC Core driver to use API exported by
the driver to discover and achieve devid and PWRMBASE address information
for each available PMC. PMC Core driver needs to get PCI device when
reading from telemetry regions.
The new SSRAM driver binds to the SSRAM device and provides the following
functionalities:
1. Look for and register telemetry regions available in SSRAM device.
2. Provide devid and PWRMBASE address information for the corresponding
PMCs.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250425195237.493129-3-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The wlan_ctrl_by_user detection was introduced by commit a50bd128f2
("asus-wmi: record wlan status while controlled by userapp").
Quoting from that commit's commit message:
"""
When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return
(1) 0x00050001 (On)
(2) 0x00050000 (Off)
(3) 0x00030001 (On)
(4) 0x00030000 (Off)
(5) 0x00000002 (Unknown)
(1), (2) means that the model has hardware GPIO for WLAN, you can call
WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off.
(3), (4) means that the model doesn’t have hardware GPIO, you need to use
API or driver library to turn WLAN on/off, and call
WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status.
After you set WLAN LED status, you can see the WLAN status is changed with
WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly
(ex: Windows), you can use it for synchronization.
(5) means that the model doesn’t have WLAN device.
WLAN is the ONLY special case with upper rule.
"""
The wlan_ctrl_by_user flag should be set on 0x0003000? ((3), (4) above)
return values, but the flag mistakenly also gets set on laptops with
0x0005000? ((1), (2)) return values. This is causing rfkill problems on
laptops where 0x0005000? is returned.
Fix the check to only set the wlan_ctrl_by_user flag for 0x0003000?
return values.
Fixes: a50bd128f2 ("asus-wmi: record wlan status while controlled by userapp")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219786
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250501131702.103360-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
MECHREVO Wujie 14XA (GX4HRXL) wakes up immediately after s2idle entry.
This happens regardless of whether the laptop is plugged into AC power,
or whether any peripheral is plugged into the laptop.
Similar to commit a55bdad5df ("platform/x86/amd/pmc: Disable keyboard
wakeup on AMD Framework 13"), the MECHREVO Wujie 14XA wakes up almost
instantly after s2idle suspend entry (IRQ1 is the keyboard):
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 9
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 1
Add this model to the spurious_8042 quirk to workaround this.
This patch does not affect the wake-up function of the built-in keyboard.
Because the firmware of this machine adds an insurance for keyboard
wake-up events, as it always triggers an additional IRQ 9 to wake up the
system.
Suggested-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Xinhui Yang <cyan@cyano.uk>
Suggested-by: Rong Zhang <i@rong.moe>
Fixes: a55bdad5df ("platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4166
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://zhuanldan.zhihu.com/p/730538041
Tested-by: Yemu Lu <prcups@krgm.moe>
Signed-off-by: Runhua He <hua@aosc.io>
Link: https://lore.kernel.org/r/20250507100103.995395-1-hua@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Change get_thinkpad_model_data() to check for additional vendor name
"NEC" in order to support NEC Lavie X1475JAS notebook (and perhaps
more).
The reason of this works with minimal changes is because NEC Lavie
X1475JAS is a Thinkpad inside. ACPI dumps reveals its OEM ID to be
"LENOVO", BIOS version "R2PET30W" matches typical Lenovo BIOS version,
the existence of HKEY of LEN0268, with DMI fw string is "R2PHT24W".
I compiled and tested with my own machine, attached the dmesg
below as proof of work:
[ 6.288932] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 6.288937] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.288938] thinkpad_acpi: ThinkPad BIOS R2PET30W (1.11 ), EC R2PHT24W
[ 6.307000] thinkpad_acpi: radio switch found; radios are enabled
[ 6.307030] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.307033] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.320322] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.371963] thinkpad_acpi: secondary fan control detected & enabled
[ 6.391922] thinkpad_acpi: battery 1 registered (start 0, stop 85, behaviours: 0x7)
[ 6.398375] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
Signed-off-by: John Chau <johnchau@0atlas.com>
Link: https://lore.kernel.org/r/20250504165513.295135-1-johnchau@0atlas.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct cros_ec_command` is a flexible structure --a structure
that contains a flexible-array member.
Fix the following warning:
drivers/platform/chrome/cros_ec_proto_test_util.h:16:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/aBp7mZ8kj9w4CKkl@kspp
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Add list of events and counters from the following blocks: APT (ARM Processor
Tile), GGA (Global Generic Accelerator), MSN (Memory Stasher and Navigator),
EMI (External Memory Interface) and PRNF (PCIe Request Node).
If any of the fields populated from the ACPI table (like apt_num) cannot be
read, assign the corresponding block count to be 0 instead of failing probe
to maintain compatibility with older firmware.
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250423083103.5240-1-shravankr@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for SN5640 and SN5610 Nvidia switches:
- SN5610 is a 51.2Tbps switch based on Nvidia SPC-4 ASIC equipped with 64
OSFP ports supporting 2.5Gbps - 400Gbps speeds.
- SN5640 is a 51.2Tbps switch based on Nvidia SPC-5 ASIC equipped with 64
OSFP ports supporting 10Gbps - 800Gbps speeds.
Both equipped with:
- Air-cooled with 4 + 1 redundant fan units.
- 2 + 2 redundant 2000W PSUs.
- System management board based on AMD CPU with secure-boot support.
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250421092051.7687-5-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Provide platform support for Nvidia Smart Switch SN4280.
The Smart Switch equipped with:
- Nvidia COME module based on AMD EPYC™ Embedded 3451 CPU.
- Nvidia Spectrum-3 ASIC.
- Four DPUs, each equipped with Nvidia BF3 ARM based processor and
with Lattice LFD2NX-40 FPGA device.
- 28xQSFP-DD external ports.
- Two power supplies.
- Four cooling drawers.
Reviewed-by: Ciju Rajan K <crajank@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250421092051.7687-3-vadimp@nvidia.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Provide platform support for Nvidia (DPU) Data Processor Unit for the
Smart Switch SN4280.
The Smart Switch equipped with:
- Nvidia COME module based on AMD EPYC™ Embedded 3451 CPU.
- Nvidia Spectrum-3 ASIC.
- Four DPUs, each equipped with Nvidia BF3 ARM based processor and
with Lattice LFD2NX-40 FPGA device.
- 28xQSFP-DD external ports.
- Two power supplies.
- Four cooling drawers.
Driver provides support for the platform management and monitoring
of DPU components. It includes support for: health events, resets and
boot progress indications logic, implemented by FPGA device.
Reviewed-by: Ciju Rajan K <crajank@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
[ij: added depends on I2C]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250421092051.7687-2-vadimp@nvidia.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With the X1 (AMD), OneXPlayer added a charge limit and charge inhibit
feature to their devices. Charge limit allows for choosing an arbitrary
battery charge setpoint in percentages. Charge ihibit allows to instruct
the device to stop charging either when it is awake or always.
This feature was then extended for the F1Pro as well. OneXPlayer also
released BIOS updates for the X1 Mini, X1 (Intel), and F1 devices that
add support for this feature. Therefore, enable it for all F1 and
X1 devices.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-15-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, this driver breaks hwmon ABI by using auto as 0 and manual
as 1. However, for pwm_enable, 0 is full speed, 1 is manual, and 2 is
auto. For the correction to be possible, this means that the pwm_enable
endpoint will need access to both pwm enable and value (as for the 0th
value, the fan needs to be set to full power).
Therefore, move the pwm value read/write to separate functions.
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-10-lkml@antheas.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, this driver breaks ABI by using auto as 0 and manual as 1.
However, for pwm_enable, 0 is full speed, 1 is manual, and 2 is auto.
For the correction to be possible, this means that the pwm_enable
endpoint will need access to both pwm enable and value (as for the 0th
value, the fan needs to be set to full power).
Therefore, begin by moving the current pwm_enable read to its own
function, oxp_pwm_enable.
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-9-lkml@antheas.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The X1 and X1 mini lineups feature an LED nested within their turbo
button. When turbo takeover is not enabled, the turbo button allows
the device to switch from 18W to 25W TDP. When the device is in the
25W TDP mode, the LED is turned on.
However, when we engage turbo takeover, the turbo led remains on its
last state, which might be illuminated and cannot be currently
controlled. Therefore, add the register that controls it under sysfs,
to allow userspace to turn it off once engaging turbo takeover and then
control it as they wish.
2024 OneXPlayer devices, other than the X1s, do not have a turbo LED.
However, earlier models do, so this can be extended to them as well
when the register for it is found.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-8-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The EC of OneXPlayer devices used to only control the fan. This is no
longer the case, with the EC of OneXPlayer gaining additional
functionality (turbo button, turbo led, battery controls).
As it will be beneficial from a complexity perspective to retain this
driver as a single unit, move it out of hwmon, and into platform/x86.
Also, remove the hwmon documentation to prepare moving it to
Documentation/ABI/.
While at it, add myself to the maintainer's file.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250425111821.88746-4-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amd_hsmp and hsmp_acpi are intended to be mutually exclusive drivers and
amd_hsmp is for legacy platforms. To achieve this, it is essential to
check for the presence of the ACPI device in plat.c. If the hsmp ACPI
device entry is found, allow the hsmp_acpi driver to manage the hsmp
and return an error from plat.c.
Additionally, rename the driver from amd_hsmp to hsmp_acpi to prevent
"Driver 'amd_hsmp' is already registered, aborting..." error in case
both drivers are loaded simultaneously.
Also, support both platform device based and ACPI based probing for
family 0x1A models 0x00 to 0x0F, implement only ACPI based probing
for family 0x1A, models 0x10 to 0x1F. Return false from
legacy_hsmp_support() for this platform.
This aligns with the condition check in is_f1a_m0h().
Link: https://lore.kernel.org/platform-driver-x86/aALZxvHWmphNL1wa@gourry-fedora-PF4VCD3F/
Fixes: 7d3135d163 ("platform/x86/amd/hsmp: Create separate ACPI, plat and common drivers")
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Link: https://lore.kernel.org/r/20250425102357.266790-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pin C and D are used on C-to-C cable applications including docks,
and for USB-C adapters that convert from DP over USB-C to other
video standards.
Pin Assignment E is intended to be used with adapter from USB-C to DP
plugs or receptacles.
All Chromebook USB-C DFPs support DisplayPort Alternate Mode as the DP
Source with support for all 3 pin assignments. Pin Assignment E is required
in order to support if the user attaches a Pin E C-to-DP cable.
Without this, the displayport.c alt mode driver will error out of
dp_altmode_probe with an -ENODEV, as it cannot find a compatible matching
pin assignment between the DFP_D and UFP_D.
Fixes: dbb3fc0ffa ("platform/chrome: cros_ec_typec: Displayport support")
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://lore.kernel.org/r/20250428174828.13939-1-bleung@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
New Intel Meteor Lake based laptops with IPU6 cameras have a new type 0x12
pin defined in the INT3472 sensor companion device which describes
the sensor's GPIOs.
This pin is primarily used on designs with a Lattice FPGA chip which is
capable of running the sensor independently of the main CPU for features
like presence detection. This pin needs to be driven high to make the FPGA
run the power-on sequence of the sensor. After driving the pin high,
the FPGA "firmware" needs 25ms to complete the power-on sequence.
Add support for this modelling the handshake pin as a GPIO driven "dvdd"
regulator with a 25 ms enable time. This model was chosen because:
1. Sensor chips don't have a handshake pin, so we need to abstract this
in some way which does not require modification to the sensor drivers,
sensor drivers using the bulk-regulator API to get avdd + vddio + dvdd
is normal. So this will work to get the right value set to the handshake
pin without requiring sensor driver modifications.
2. Sensors typically wait only a small time for the sensor to power-on
after de-asserting reset. Not the 25ms the Lattice chip requires.
Using the regulator framework's enable_time allows hiding the need for
this delay from the sensor drivers.
Link: https://lore.kernel.org/platform-driver-x86/59f672c3-6d87-4ec7-9b7f-f44fe2cce934@redhat.com/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2341731
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: David Heidelberg <david@ixit.cz> # Dell Latitude 9440
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250417111337.38142-9-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is a preparation patch for registering multiple regulators, which
requires a different supply-name for each regulator. Make supply-name
a parameter to skl_int3472_register_regulator() and use con-id to set it
so that the existing int3472_gpio_map remapping can be used with it.
Since supply-name is a parameter now, drop the fixed
skl_int3472_regulator_map_supplies[] array and instead add lower- and
upper-case mappings of the passed-in supply-name to the regulator.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Tested-by: David Heidelberg <david@ixit.cz> # Dell Latitude 9440
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250417111337.38142-6-hdegoede@redhat.com
[ij: GPIO_SUPPPLY_NAME_LENGTH -> GPIO_SUPPLY_NAME_LENGTH]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
