The metric counting shows incorrect results if the events in the
metric group using the same event but different filter options.
This is because we only judge the event code to decide whether
the event in the metric group should share the same hardware
counter, but ignore the settings of the filter.
For example, on a platform of 2 ports 0x1 and 0x2 but only port
0x1 has a downstream PCIe NVME device. The metric counting
shows both ports have the same counts because we misassign these
two events to one same hardware counter:
[root@localhost perf-iostat]# ./perf stat -e '{hisi_pcie0_core1/event=0x0104,port=0x2/,hisi_pcie0_core1/event=0x0104,port=0x1/}'
Performance counter stats for 'system wide':
7907484924 hisi_pcie0_core1/event=0x0104,port=0x2/
7907484924 hisi_pcie0_core1/event=0x0104,port=0x1/
10.153863691 seconds time elapsed
Fix this by using the whole config rather than the event only
to judge whether two events are the same and should share the
same hardware counter. With this patch, the metric counting in
the above case tends to be corrected:
[root@localhost perf-iostat]# ./perf stat -e '{hisi_pcie0_core1/event=0x0104,port=0x2/,hisi_pcie0_core1/event=0x0104,port=0x1/}'
Performance counter stats for 'system wide':
0 hisi_pcie0_core1/event=0x0104,port=0x2/
8123122077 hisi_pcie0_core1/event=0x0104,port=0x1/
10.152875631 seconds time elapsed
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240223103359.18669-4-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
HiSilicon UC PMU v2 suffers the erratum 162700402 that the PMU counter
cannot be set due to the lack of clock under power saving mode. This will
lead to error or inaccurate counts. The clock can be enabled by the PMU
global enabling control.
This patch tries to fix this by set the UC PMU enable before set event
period to turn on the clock, and then restore the UC PMU configuration.
The counter register can hold its value without a clock.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240227125231.53127-1-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Pull RISC-V fixes from Palmer Dabbelt:
- detect ".option arch" support on not-yet-released LLVM builds
- fix missing TLB flush when modifying non-leaf PTEs
- fixes for T-Head custom extensions
- fix for systems with the legacy PMU, that manifests as a crash on
kernels built without SBI PMU support
- fix for systems that clear *envcfg on suspend, which manifests as
cbo.zero trapping after resume
- fixes for Svnapot systems, including removing Svnapot support for
huge vmalloc/vmap regions
* tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Sparse-Memory/vmemmap out-of-bounds fix
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
perf: RISCV: Fix panic on pmu overflow handler
MAINTAINERS: Update SiFive driver maintainers
drivers: perf: ctr_get_width function for legacy is not defined
drivers: perf: added capabilities for legacy PMU
RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs
riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
riscv: mm: fix NOCACHE_THEAD does not set bit[61] correctly
riscv: add CALLER_ADDRx support
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
riscv: tlb: fix __p*d_free_tlb()
The debugfs pretty-printer was written for the CMN-600 assumptions of a
maximum 8x8 mesh, but CMN-700 now allows coordinates and ID values up to
12 and 128 respectively, which can overflow the format strings, mess up
the alignment of the table and hurt overall readability. This table does
prove useful for double-checking that the driver is picking up the
topology of new systems correctly and for verifying user expectations,
so tweak the formatting to stay nice and readable with wider values.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1d1517eadd1bac5992fab679c9dc531b381944da.1702484646.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/75dda01b2ad6e17f726830094bd38cb8faab5cbe.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/7be677dfa13d3a7eab6eef0d808ba8a9855d14ae.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/a2587688c54834482d68fe2a44f415a649ad6477.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/055656e474208b0fb583e249530fa211fa3be57c.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/79f48409f663f0184f03d34c6a86359ea3aa1291.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert these drivers from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/33a8be0641b9447469fb7f6af0a10fb65efa97a3.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/bd12035ca467d7f4cd5edcfd6febda56600caacd.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/c5b76bf352385d8ef6211ee8c43352c74eee064d.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/abfedc224eca7f4960b7ddfb6daedd47a3699ca5.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/23bfd1a73ce819ffce6137c237608684a3cdfda6.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/1eda5e216afcb0e26a50e9be112d4514ffd0844a.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20cc24ede88f5e000991dfe6f4cf1222b819e337.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/9ff5a467569dd51b2fc44e11594ad5db7ea15f57.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/8698ca612e17292f8a8bbb2d1c0f6be4b2053da7.1702648125.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/1cae5f0c4693333c91d28a09388bdb8bfcc25d0b.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/70b581d58cfffdccb9fb3ed17bf3220c00f8033f.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/33dbadf246eb323edd9e09ac744111216c167a55.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/e6dd47f791ddcc4cc6f7a80efcede245528220e6.1702648124.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Will Deacon <will@kernel.org>
Pull ACPI updates from Rafael Wysocki:
"From the new features standpoint, the most significant change here is
the addition of CSI-2 and MIPI DisCo for Imaging support to the ACPI
device enumeration code that will allow MIPI cameras to be enumerated
through the platform firmware on systems using ACPI.
Also significant is the switch-over to threaded interrupt handlers for
the ACPI SCI and the dedicated EC interrupt (on systems where the
former is not used) which essentially allows all ACPI code to run with
local interrupts enabled. That should improve responsiveness
significantly on systems where multiple GPEs are enabled and the
handling of one SCI involves many I/O address space accesses which
previously had to be carried out in one go with disabled interrupts on
the local CPU.
Apart from the above, the ACPI thermal zone driver will use the
Thermal fast Sampling Period (_TFP) object if available, which should
allow temperature changes to be followed more accurately on some
systems, the ACPI Notify () handlers can run on all CPUs (not just on
CPU0), which should generally speed up the processing of events
signaled through the ACPI SCI, and the ACPI power button driver will
trigger wakeup key events via the input subsystem (on systems where it
is a system wakeup device)
In addition to that, there are the usual bunch of fixes and cleanups.
Specifics:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki)
- Adjust the cpufreq thermal reduction algorithm in the ACPI
processor driver for Tegra241 (Srikar Srimath Tirumala, Arnd
Bergmann)
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki)
- Switch over ACPI to using a threaded interrupt handler for the SCI
(Rafael J. Wysocki)
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki)
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki)
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock
to keep local interrupts on (Rafael J. Wysocki)
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg)
- Correct and clean up the generic function for parsing ACPI
data-only tables with array structure (Yuntao Wang)
- Modify acpi_dev_uid_match() to support different types of its
second argument and adjust its users accordingly (Raag Jadav)
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki)
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann)
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen)
- Modify the ACPI LPIT table handling code to avoid u32
multiplication overflows in state residency computations (Nikita
Kiryushin)
- Drop an unused helper function from the ACPI backlight (video)
driver and add a clarifying comment to it (Hans de Goede)
- Update the ACPI backlight driver to avoid using uninitialized
memory in some cases (Nikita Kiryushin)
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu)
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik)
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous
memory failure events, so they are handled differently from the
asynchronous ones (Shuai Xue)
- Fix NULL pointer dereference check in the ACPI extlog driver
(Prarit Bhargava)
- Adjust the ACPI extlog driver to clear the Extended Error Log
status when RAS_CEC handled the error (Tony Luck)
- Add IRQ override quirks for some Infinity laptops and for TongFang
GMxXGxx (David McFarland, Hans de Goede)
- Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is
not the same as one of the real pxm values (Yuntao Wang)
- Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
driver so as to prevent miscalculation of the values in the clock
divider (Andy Shevchenko)
- Adjust comments in the ACPI watchdog driver to prevent kernel-doc
from complaining during documentation builds (Randy Dunlap)
- Make the ACPI button driver send wakeup key events to user space in
addition to power button events on systems that can be woken up by
the power button (Ken Xue)
- Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
structure field (Dmitry Antipov)"
* tag 'acpi-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
ACPI: button: trigger wakeup key events
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: EC: Use a spin lock without disabing interrupts
ACPI: EC: Use a threaded handler for dedicated IRQ
ACPI: OSL: Use spin locks without disabling interrupts
ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error
ACPI: LPSS: Fix the fractional clock divider flags
ACPI: NUMA: Fix the logic of getting the fake_pxm value
ACPI: NUMA: Optimize the check for the availability of node values
ACPI: NUMA: Remove unnecessary check in acpi_parse_gi_affinity()
ACPI: watchdog: fix kernel-doc warnings
ACPI: extlog: fix NULL pointer dereference check
...
Merge in arm64 fixes queued for 6.7 so that kpti_install_ng_mappings()
can be updated to use arm64_kernel_unmapped_at_el0() instead of checking
the ARM64_UNMAP_KERNEL_AT_EL0 CPU capability directly.
* for-next/fixes:
arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify
perf/arm-cmn: Fail DTC counter allocation correctly
arm64: Avoid enabling KPTI unnecessarily
Merge ACPI utility functions updates for 6.8-rc1:
- Modify acpi_dev_uid_match() to support different types of its second
argument and adjust its users accordingly (Raag Jadav).
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki).
* acpi-utils:
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
perf: arm_cspmu: drop redundant acpi_dev_uid_to_integer()
efi: dev-path-parser: use acpi_dev_uid_match() for matching _UID
ACPI: LPSS: use acpi_dev_uid_match() for matching _UID
ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types
ACPI: bus: update acpi_dev_uid_match() to support multiple types
This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
Core controller IP which provides statistics feature. The PMU is a PCIe
configuration space register block provided by each PCIe Root Port in a
Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
injection, and Statistics).
To facilitate collection of statistics the controller provides the
following two features for each Root Port:
- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
time spent in each low-power LTSSM state) and
- one 32-bit counter for Event Counting (error and non-error events for
a specified lane)
Note: There is no interrupt for counter overflow.
This driver adds PMU devices for each PCIe Root Port. And the PMU device is
named based the BDF of Root Port. For example,
30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
the PMU device name for this Root Port is dwc_rootport_3018.
Example usage of counting PCIe RX TLP data payload (Units of bytes)::
$# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
average RX bandwidth can be calculated like this:
PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231208025652.87192-5-xueshuai@linux.alibaba.com
[will: Fix sparse error due to use of uninitialised 'vsec' symbol in
dwc_pcie_match_des_cap()]
Signed-off-by: Will Deacon <will@kernel.org>
This reverts commit a5f4ca68f3.
Pulling in the Arm-specific 'linux/perf/arm_pmu.h' header breaks the
allmodconfig build for x86:
> In file included from drivers/perf/arm_dmc620_pmu.c:26:
> include/linux/perf/arm_pmu.h:15:10: fatal error: asm/cputype.h: No such file or directory
> 15 | #include <asm/cputype.h>
> | ^~~~~~~~~~~~~~~
Just put things back like they were so that the driver can continue to
be compile-tested on a variety of architectures.
Link: https://lore.kernel.org/r/20231213100931.12d9d85e@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Will Deacon <will@kernel.org>
FEAT_PMUv3_TH (Armv8.8) permits a PMU counter to increment only on
events whose count meets a specified threshold condition. For example if
PMEVTYPERn.TC (Threshold Control) is set to 0b101 (Greater than or
equal, count), and the threshold is set to 2, then the PMU counter will
now only increment by 1 when an event would have previously incremented
the PMU counter by 2 or more on a single processor cycle.
Three new Perf event config fields, 'threshold', 'threshold_compare' and
'threshold_count' have been added to control the feature.
threshold_compare maps to the upper two bits of PMEVTYPERn.TC and
threshold_count maps to the first bit of TC. These separate attributes
have been picked rather than enumerating all the possible combinations
of the TC field as in the Arm ARM. The attributes would be used on a
Perf command line like this:
$ perf stat -e stall_slot/threshold=2,threshold_compare=2/
A new capability for reading out the maximum supported threshold value
has also been added:
$ cat /sys/bus/event_source/devices/armv8_pmuv3/caps/threshold_max
0x000000ff
If a threshold higher than threshold_max is provided, then an error is
generated. If FEAT_PMUv3_TH isn't implemented or a 32 bit kernel is
running, then threshold_max reads zero, and attempting to set a
threshold value will also result in an error.
The threshold is per PMU counter, and there are potentially different
threshold_max values per PMU type on heterogeneous systems.
Bits higher than 32 now need to be written into PMEVTYPER, so
armv8pmu_write_evtype() has to be updated to take an unsigned long value
rather than u32 which gives the correct behavior on both aarch32 and 64.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231211161331.1277825-11-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
This mechanism makes it much easier to define and read new attributes
so move it to the arm_pmu.h header so that it can be shared. At the same
time update the existing format attributes to use it.
GENMASK has to be changed to GENMASK_ULL because the config fields are
64 bits even on arm32 where this will also be used now.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231211161331.1277825-7-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
FEAT_PMUv3_TH (Armv8.8) adds two new fields to PMEVTYPER, so include
them in the mask. These aren't writable on 32 bit kernels as they are in
the high part of the register, so only include them for arm64.
It would be difficult to do this statically in the asm header files for
each platform without resulting in circular includes or #ifdefs inline
in the code. For that reason the ARMV8_PMU_EVTYPE_MASK definition has
been removed and the mask is constructed programmatically.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231211161331.1277825-6-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
