If the driver reset fails, it may not work properly.
Therefore, the ndo.open() operation should be rejected.
In this patch, the driver calls netif_device_detach()
before the reset and calls netif_device_attach()
after the reset succeeds. If the reset fails,
netif_device_attach() is not called. Therefore,
netdev does not present and cannot be opened.
If reset fails, only the PCI reset (via sysfs)
can be used to attempt recovery.
Fixes: 3f5a61f6d5 ("net: hibmcge: Add reset supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the user dumps statistics, the hibmcge driver automatically
updates all statistics. If the driver is performing the reset operation,
the error data of 0xFFFFFFFF is updated.
Therefore, if the driver is resetting, the hbg_update_stats_by_info()
needs to return directly.
Fixes: c0bf9bf31e ("net: hibmcge: Add support for dump statistics")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7ed3e88664 ("wifi: ath12k: update regulatory rules when connection
established") introduced a call to ath12k_reg_handle_chan_list() upon
connection to update the regulatory domain in cfg80211 based on the power
type received from the AP.
However, this update fails because ah->regd_updated was already set to true
during the earlier regulatory update triggered when the interface was
added.
To resolve this, reset ah->regd_updated before calling
ath12k_reg_handle_chan_list() to ensure the update proceeds correctly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 7ed3e88664 ("wifi: ath12k: update regulatory rules when connection established")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-3-9737de5bf98e@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Commit 4c546023d7 ("wifi: ath12k: update regulatory rules when interface
added"), introduced a call to ath12k_reg_handle_chan_list() during
interface addition to update the regulatory domain based on the interface
type. While this works initially, subsequent updates (e.g., after an
interface delete/re-add cycle) fail because ah->regd_updated is never
reset.
To address this, reset ah->regd_updated before calling
ath12k_reg_handle_chan_list() to allow the update to proceed.
However, this change exposes another issue: a timeout occurs when waiting
for the 11D scan to complete, as seen in the log:
ath12k_pci 0000:05:00.0: failed to receive 11d scan complete: timed out
This happens because during interface down, ar->state_11d is set to
ATH12K_11D_PREPARING, and during interface up, the host waits for
ar->completed_11d_scan even though the scan hasn't started yet.
Fix this by updating the wait condition to check for ATH12K_11D_RUNNING,
which is the only state where a scan complete event is expected.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 4c546023d7 ("wifi: ath12k: update regulatory rules when interface added")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-2-9737de5bf98e@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In the current implementation of ath12k_regd_update(), the ah->regd_updated
flag is used to ensure that the regulatory domain is updated only once per
radio. During MAC registration, this function is called to push the default
regulatory domain to cfg80211. At that point, the hardware state is not on
and hence ah->regd_updated remains false.
However, after commit 4c546023d7 ("wifi: ath12k: update regulatory rules
when interface added"), ath12k_reg_handle_chan_list() is invoked when an
interface is added, which in turn calls ath12k_regd_update(). By this time,
hardware state is on and consecutively ah->regd_updated becomes true.
Later, when the 11D scan completes and a new regulatory domain is received
from the firmware, the host attempts to update cfg80211 again via
ath12k_regd_update(). But since ah->regd_updated is already true, the
update is skipped.
>From the user's perspective, this results in a failure to connect to 6 GHz
APs, as the default regulatory domain (the only one pushed to cfg80211)
does not include 6 GHz support.
To resolve this, reset the ah->regd_updated flag when handling the 11D
regulatory domain update.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 591de41d70 ("wifi: ath12k: add 11d scan offload support")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-1-9737de5bf98e@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In mt76_connac_mcu_sta_basic_tlv() link_conf is always not NULL.
Revert the commit '9890624c1b39 ("wifi: mt76: Check link_conf pointer in
mt76_connac_mcu_sta_basic_tlv()")' in order to fix the following
warning:
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c:394 mt76_connac_mcu_sta_basic_tlv()
warn: variable dereferenced before check 'link_conf'
This reverts commit 9890624c1b.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250325-mt76_connac_mcu_sta_basic_tlv-link_conf-revert-v1-1-b84efefb74ee@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In mt7996_stop_phy() the mt7996_phy structure is
dereferenced before the null sanity check which could
lead to a null deref.
Fix by moving the dereference operation after the
sanity check.
Fixes: 69d54ce749 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250421111344.11484-1-qasdev00@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If link_conf_dereference_protected() or mt7996_vif_link()
or link_sta_dereference_protected() fail the code jumps to
the error_unlink label and returns ret which is uninitialised.
Fix this by setting err before jumping to error_unlink.
Fixes: c7e4fc3624 ("wifi: mt76: mt7996: Update mt7996_mcu_add_sta to MLO support")
Fixes: dd82a9e02c ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250421110550.9839-1-qasdev00@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This reverts commit 3b522caded.
The MTK connac3 has introduced new hardware, SDO (Software Defined
Offload), to offload the process of filling the TX descriptor. Initially,
there were some issues, but after several fixes, it should now be stable,
allowing us to revert this commit.
Additionally, activating SDO is essential for the proper functioning of
features like TX checksum offload.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250328022847.1612082-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt7996_thermal_init() is not checked.
Add NULL check in mt7996_thermal_init(), to handle kernel NULL
pointer dereference error.
Fixes: 69d54ce749 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://patch.msgid.link/20250407095551.32127-1-hanchunchao@inspur.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the
definition of HWRDD idx.
For example, MT_RX_SEL2 is for background HWRDD idx, not an
option of rdd_rx_sel.
Additionally, HWRDD idx does not exactly map to band idx for
Connac 3 chips. So, add mt7996_get_rdd_idx as a helper function.
Finally, remove some parts of the code inherited from the legacy chips.
For instance,
1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80),
especially the 76xx series.
2. rdd_rx_sel is also used for single-band-dual-HWRDD chips
rx_sel = 0 => RDD0 for WF0, RDD1 for WF2
rx_sel = 1 => RDD0 for WF1, RDD1 for WF3
Chip Variants | 5G rdd idx | Background rdd idx
---------------------------|----------------|-------------------
MT7996 (except 205/255) | 1 | 2
MT7992 | 1 | 2
MT7990 | 1 | 2
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Money Wang <money.wang@mediatek.com>
Link: https://patch.msgid.link/20250320015926.3948672-1-StanleyYP.Wang@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the
definition of HWRDD idx.
For example, MT_RX_SEL2 is for background HWRDD idx, not an option
of rdd_rx_sel.
Therefore, add mt7915_get_rdd_idx as a helper function to get the
HWRDD idx for each variants.
Additionally, remove some parts of the code inherited from the legacy
chips.
For instance,
1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80),
especially the 76xx series.
2. rdd_rx_sel is also used for single-band-dual-HWRDD chips
rx_sel = 0 => RDD0 for WF0, RDD1 for WF2
rx_sel = 1 => RDD0 for WF1, RDD1 for WF3
Chip Variants | 5G rdd idx(=bandidx)| Background rdd idx
-------------------------------|---------------------|-------------------
MT7915A | 0 | 2
MT7915D | 1 | 2
MT7916 2G + 5G (2T2R+1R) | 1 | 2
MT7916 2G + 5G (3T3R) | 1 | N/A
MT7981 2G + 5G | 1 | N/A
MT7986 2G + 5G (one adie DBDC) | 1 | N/A
MT7986 5G (one adie) | 1 (bandidx=MT_BAND1)| N/A
MT7986 2G + 5G (dual adie) | 1 | N/A
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250320015918.3948643-1-StanleyYP.Wang@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The chipset name (i.e., brand name) used by the driver may cause confusion
with the PCI device ID when adding support for new chipsets.
| Chipset name | PCI device id |
|--------------|----------------|
| 7996 | 0x7990, 0x7991 |
| 7992 | 0x7992, 0x799a |
| 7990 | 0x7993, 0x799b |
To prevent confusion, replace the code that directly uses the device ID
with macros. This is a preliminary patch to support mt7990 chipset.
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250409140750.724437-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is a preparation patch for the introduction of CAN XL.
CAN FD and CAN XL uses similar bittiming parameters. Add one level of
nesting for all the CAN FD parameters. Typically:
priv->can.data_bittiming;
becomes:
priv->can.fd.data_bittiming;
This way, the CAN XL equivalent (to be introduced later) would be:
priv->can.xl.data_bittiming;
Add the new struct data_bittiming_params which contains all the data
bittiming parameters, including the TDC and the callback functions.
This done, update all the CAN FD drivers to make use of the new
layout.
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250501171213.2161572-2-mailhol.vincent@wanadoo.fr
[mkl: fix rcar_canfd]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The shift and w value in rcar_canfd_setrnc() are dictated by the
field width:
- R-Car Gen4 packs 2 values in a 32-bit word, using a field width
of 16 bits,
- R-Car Gen3 packs up to 4 values in a 32-bit word, using a field
width of 8 bits.
Add rnc_field_width variable to struct rcar_canfd_hw_info to handle this
difference. The rnc_stride is 32 / rnc_field_width and the index parameter
w is calculated by ch / rnc_stride. The shift value in rcar_canfd_setrnc()
is computed by using (32 - (ch % rnc_stride + 1) * rnc_field_width).
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20250417054320.14100-10-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
