Correct spelling of platforms, various, and initial.
As flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The purpose of resetting the TX queue is to reset the byte and packet
count as well as to clear the software flow control XOFF bit.
MediaTek developers pointed out that netdev_reset_queue would only
resets queue 0 of the network device.
Queues that are not reset may cause unexpected issues.
Packets may stop being sent after reset and "transmit timeout" log may
be displayed.
Import fix from MediaTek's SDK to resolve this issue.
Link: 319c0d9905
Fixes: f63959c7ee ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c9ff9adceac4f152239a0f65c397f13547639175.1746406763.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MediaTek MT7988 SoC comes with an single built-in Ethernet PHY for
2500Base-T/1000Base-T/100Base-TX/10Base-T link partners in addition to
the built-in 1GE switch. The built-in PHY only supports full duplex.
Add muxes allowing to select GMAC2->2.5G PHY path and add basic support
for XGMAC as the built-in 2.5G PHY is internally connected via XGMII.
The XGMAC features will also be used by 5GBase-R, 10GBase-R and USXGMII
SerDes modes which are going to be added once support for standalone PCS
drivers is in place.
In order to make use of the built-in 2.5G PHY the appropriate PHY driver
as well as (proprietary) PHY firmware has to be present as well.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9072cefbff6db969720672ec98ed5cef65e8218c.1745715380.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When removing the clock bits for clocks which aren't used by the
Ethernet driver their names should also have been removed from the
mtk_clks_source_name array.
Remove them now as enum mtk_clks_map needs to match the
mtk_clks_source_name array so the driver can make sure that all required
clocks are present and correctly name missing clocks.
Fixes: 887b1d1adb ("net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d075e706ff1cebc07f9ec666736d0b32782fd487.1745555321.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 51a4df60db ("net: ethernet: mtk_eth_soc: convert caps in
mtk_soc_data struct to u64") the capabilities bitfield was converted to
a 64-bit value, but a cap_bit in struct mtk_eth_muxc which is used to
store a full bitfield (rather than the bit number, as the name would
suggest) still holds only a 32-bit value.
Change the type of cap_bit to u64 in order to avoid truncating the
bitfield which results in path selection to not work with capabilities
above the 32-bit limit.
The values currently stored in the cap_bit field are
MTK_ETH_MUX_GDM1_TO_GMAC1_ESW:
BIT_ULL(18) | BIT_ULL(5)
MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY:
BIT_ULL(19) | BIT_ULL(5) | BIT_ULL(6)
MTK_ETH_MUX_U3_GMAC2_TO_QPHY:
BIT_ULL(20) | BIT_ULL(5) | BIT_ULL(6)
MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII:
BIT_ULL(20) | BIT_ULL(5) | BIT_ULL(7)
MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII:
BIT_ULL(21) | BIT_ULL(5)
While all those values are currently still within 32-bit boundaries,
the addition of new capabilities of MT7988 as well as future SoC's
like MT7987 will exceed them. Also, the use of a 32-bit 'int' type to
store the result of a BIT_ULL(...) is misleading.
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ded98b0d716c3203017a7a92151516ec2bf1abee.1745369249.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The airoha_eth driver has no codebase shared with mtk_eth_soc one.
Moreover, the upcoming features (flowtable hw offloading, PCS, ..) will
not reuse any code from MediaTek driver. Move the Airoha driver in a
dedicated folder.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mtk_foe_entry_set_vlan() in mtk_ppe.c already supports double vlan
tagging, but mtk_flow_offload_replace() in mtk_ppe_offload.c only allows
for 1 vlan tag, optionally in combination with pppoe and dsa tags.
However, mtk_foe_entry_set_vlan() only allows for setting the vlan id.
The protocol cannot be set, it is always ETH_P_8021Q, for inner and outer
tag. This patch adds QinQ support to mtk_flow_offload_replace(), only in
the case that both inner and outer tags are ETH_P_8021Q.
Only PPPoE-in-Q (as before) and Q-in-Q are allowed. A combination
of PPPoE and Q-in-Q is not allowed.
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20250225201509.20843-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For GSO packets, skb_cow_head() will reallocate the skb for TSO header
cloned skbs in airoha_dev_xmit(). For this reason, sinfo pointer can be
no more valid. Fix the issue relying on skb_shinfo() macro directly in
airoha_dev_xmit().
The problem exists since
commit 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
but it is not a user visible, since we can't currently enable TSO
for DSA user ports since we are missing to initialize net_device
vlan_features field.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250213-airoha-en7581-flowtable-offload-v4-1-b69ca16d74db@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix wrong GDM4 register definition, in Airoha SDK GDM4 is defined at
offset 0x2400 but this doesn't make sense as it does conflict with the
CDM4 that is in the same location.
Following the pattern where each GDM base is at the FWD_CFG, currently
GDM4 base offset is set to 0x2500. This is correct but REG_GDM4_FWD_CFG
and REG_GDM4_SRC_PORT_SET are still using the SDK reference with the
0x2400 offset. Fix these 2 define by subtracting 0x100 to each register
to reflect the real address location.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250120154148.13424-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce support for HTB Qdisc offload available in the Airoha EN7581
ethernet controller. EN7581 can offload only one level of HTB leafs.
Each HTB leaf represents a QoS channel supported by EN7581 SoC.
The typical use-case is creating a HTB leaf for QoS channel to rate
limit the egress traffic and attach an ETS Qdisc to each HTB leaf in
order to enforce traffic prioritization.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for ETS Qdisc offload available on the Airoha EN7581
ethernet controller. In order to be effective, ETS Qdisc must configured
as leaf of a HTB Qdisc (HTB Qdisc offload will be added in the following
patch). ETS Qdisc available on EN7581 ethernet controller supports at
most 8 concurrent bands (QoS queues). We can enable an ETS Qdisc for
each available QoS channel.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Airoha EN7581 SoC supports 32 Tx DMA rings used to feed packets to QoS
channels. Each channels supports 8 QoS queues where the user can apply
QoS scheduling policies. In a similar way, the user can configure hw
rate shaping for each QoS channel.
Introduce ndo_select_queue callback in order to select the tx queue
based on QoS channel and QoS queue. In particular, for dsa device select
QoS channel according to the dsa user port index, rely on port id
otherwise. Select QoS queue based on the skb priority.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is a preliminary patch in order to enable hw Qdisc offloading.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_dim() is currently passed a struct dim_sample argument by value.
struct dim_sample is 24 bytes. Since this is greater 16 bytes, x86-64
passes it on the stack. All callers have already initialized dim_sample
on the stack, so passing it by value requires pushing a duplicated copy
to the stack. Either witing to the stack and immediately reading it, or
perhaps dereferencing addresses relative to the stack pointer in a chain
of push instructions, seems to perform quite poorly.
In a heavy TCP workload, mlx5e_handle_rx_dim() consumes 3% of CPU time,
94% of which is attributed to the first push instruction to copy
dim_sample on the stack for the call to net_dim():
// Call ktime_get()
0.26 |4ead2: call 4ead7 <mlx5e_handle_rx_dim+0x47>
// Pass the address of struct dim in %rdi
|4ead7: lea 0x3d0(%rbx),%rdi
// Set dim_sample.pkt_ctr
|4eade: mov %r13d,0x8(%rsp)
// Set dim_sample.byte_ctr
|4eae3: mov %r12d,0xc(%rsp)
// Set dim_sample.event_ctr
0.15 |4eae8: mov %bp,0x10(%rsp)
// Duplicate dim_sample on the stack
94.16 |4eaed: push 0x10(%rsp)
2.79 |4eaf1: push 0x10(%rsp)
0.07 |4eaf5: push %rax
// Call net_dim()
0.21 |4eaf6: call 4eafb <mlx5e_handle_rx_dim+0x6b>
To allow the caller to reuse the struct dim_sample already on the stack,
pass the struct dim_sample by reference to net_dim().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Link: https://patch.msgid.link/20241031002326.3426181-2-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
linux-firmware commit 808cba84 ("mtk_wed: add firmware for mt7988
Wireless Ethernet Dispatcher") added mt7988_wo_{0,1}.bin in the
'mediatek/mt7988' directory while driver current expects the files in
the 'mediatek' directory.
Change path in the driver header now that the firmware has been added.
Fixes: e2f64db13a ("net: ethernet: mtk_wed: introduce WED support for MT7988")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/Zxz0GWTR5X5LdWPe@pidgin.makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c4 ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix typo in airoha_fe_init routine configuring CDM2_OAM_QSEL_MASK field
of REG_CDM2_FWD_CFG register.
This bug is not introducing any user visible problem since Frame Engine
CDM2 port is used just by the second QDMA block and we currently enable
just QDMA1 block connected to the MT7530 dsa switch via CDM1 port.
Introduced by commit 23020f0493 ("net: airoha: Introduce ethernet
support for EN7581 SoC")
Reported-by: ChihWei Cheng <chihwei.cheng@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241015-airoha-eth-cdm2-fixes-v1-1-9dc6993286c3@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
The loop responsible for allocating up to MTK_FQ_DMA_LENGTH buffers must
only touch as many descriptors, otherwise it ends up corrupting unrelated
memory. Fix the loop iteration count accordingly.
Fixes: c57e558194 ("net: ethernet: mtk_eth_soc: handle dma buffer size soc specific")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241015081755.31060-1-nbd@nbd.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix typo in EGRESS_RATE_METER_EN_MASK mask definition. This bus in not
introducing any user visible problem since, even if we are setting
EGRESS_RATE_METER_EN_MASK bit in REG_EGRESS_RATE_METER_CFG register,
egress QoS metering is not supported yet since we are missing some other
hw configurations (e.g token bucket rate, token bucket size).
Introduced by commit 23020f0493 ("net: airoha: Introduce ethernet support
for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-airoha-fixes-v2-1-18af63ec19bf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net/ethernet to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Align PSE memory configuration to vendor SDK. In particular, increase
initial value of PSE reserved memory in airoha_fe_pse_ports_init()
routine by the value used for the second Packet Processor Engine (PPE2)
and do not overwrite the default value.
Introduced by commit 23020f0493 ("net: airoha: Introduce ethernet support
for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001-airoha-eth-pse-fix-v2-2-9a56cdffd074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the default value for the number of PSE reserved pages in orig_val
at the beginning of airoha_fe_set_pse_oq_rsv routine, before updating it
with airoha_fe_set_pse_queue_rsv_pages().
Introduce airoha_fe_get_pse_all_rsv utility routine.
Introduced by commit 23020f0493 ("net: airoha: Introduce ethernet support
for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001-airoha-eth-pse-fix-v2-1-9a56cdffd074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
