Pull media updates from Mauro Carvalho Chehab:
- v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output
- New driver: Amlogic C3 ISP
- New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10
- amlogic: c3-mipi-csi2: Handle 64-bits division
- a fix for 64-bits division at the amlogic c3-mipi-csi2 driver
- Changes at atomisp to support mainline mt9m114 driver and remove
deprecated GPIO APIs
- various cleanups, fixes and enhancements
* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Add get_image_fmt ops
media: rkvdec: Initialize the m2m context before the controls
media: rkvdec: h264: Limit minimum profile to constrained baseline
media: mediatek: jpeg: support 34bits
media: verisilicon: Free post processor buffers on error
media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
media: amlogic: c3-mipi-csi2: Handle 64-bits division
media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
media: uvcvideo: Fix deferred probing error
media: uvcvideo: Rollback non processed entities on error
media: uvcvideo: Send control events for partial succeeds
media: uvcvideo: Return the number of processed controls
media: uvcvideo: Do not turn on the camera for some ioctls
media: uvcvideo: Make power management granular
media: uvcvideo: Increase/decrease the PM counter per IOCTL
media: uvcvideo: Create uvc_pm_(get|put) functions
media: uvcvideo: Keep streaming state in the file handle
Documentation: media: Add documentation file c3-isp.rst
Documentation: media: Add documentation file metafmt-c3-isp.rst
...
The HW iommu is able to support a 34-bit iova address-space (16GB),
enable this feature for the encoder/decoder driver by shifting the
address by two bits and setting the extended address registers.
Signed-off-by: Jianhua Lin <jianhua.lin@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
During initialization, the post processor allocates the same number of
buffers as the buf queue.
As the init function is called in streamon(), if an allocation fails,
streamon will return an error and streamoff() will not be called, keeping
all post processor buffers allocated.
To avoid that, all post proc buffers are freed in case of an allocation
error.
Fixes: 26711491a8 ("media: verisilicon: Refactor postprocessor to store more buffers")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The kernel test robot reports the following error when building on
Hexagon with hexagon-allmodconfig.
ERROR: modpost: "__hexagon_divdi3"
[drivers/media/platform/amlogic/c3/mipi-csi2/c3-mipi-csi2.ko] undefined!
The error is caused by using DIV_ROUND_UP() with a 64 bits divisor with
a 32-bit dividend, which on Hexagon and clang-17 is resolved with a call
to the __hexagon_divdi3() helper function, part of the compiler support
library and not available when building Linux.
Use DIV_ROUND_UP_ULL() to fix the build error and avoid calling the
__hexagon_divdi3() helper function.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505101334.UHxNcUUO-lkp@intel.com/
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The C3 ISP supports multi-camera and multi-exposure HDR, integrates
advanced imaging technologies for optimal quality, and drives the
core pipeline to transform raw sensor data into high-fidelity images
through demosaicing, color correction, and tone mapping operations.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: drop unnecessary vb2_ops_wait_prepare/finish callbacks]
Add a driver for the CSI-2 receiver unit found on the Amlogic C3 SoC.
Create a drivers/media/platform/amlogic/c3/ directory to host the driver
and the forthcoming support for the Amlogic C3 MIPI adapter and C3 ISP.
This driver is used to receive the MIPI data from image sensor.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix typo: uinit -> unit]
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: d33186d0be ("[media] omap3isp: ccdc: Use the DMA API for LSC")
Fixes: 0e24e90f2c ("[media] omap3isp: stat: Use the DMA API")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The sequence number communicate the lost frames to userspace. For this
reason, it must be incremented even when a frame is skipped. This allows
userspace such as GStreamer to report the loss.
Fixes: 7b59b132ad ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
This variable is used to fill the v4l2_buffer.sequence, let's name it
the exact same way to reduce confusion.
No functional changes.
Fixes: 7b59b132ad ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The vsp1 driver implements very partial colour space support: it
hardcodes the colorspace field on all video devices and subdevices to
V4L2_COLORSPACE_SRGB, regardless of the configured format. The
xfer_func, ycbcr_enc and quantization fields are not set (except for
hsv_enc for HSV formats on video devices). This doesn't match the
hardware configuration, which handles YUV data as encoding in BT.601
with limited range.
As a first step towards colour space configuration, keep the colour
space fields hardcoded, but set them based on the selected format type
(RGB, YUV or HSV).
While at it, remove an extra blank line.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250429232904.26413-6-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The vsp1_dl library allows to program a display list and feed it
continuously to the VSP2. As an alternative operation mode, the library
allows to program the VSP2 in 'single shot' mode, where a display list
is submitted to the VSP on request only.
Currently the 'single shot' mode is only available when the VSP2 is
controlled by userspace, while it works in continuous mode when driven
by DRM, as frames have to be submitted to the display continuously.
For the VSPX use case, where there is no uapi support, we should however
work in single-shot mode as the ISP driver programs the VSPX on
request.
Initialize the display lists in single shot mode in case the VSP1 is
controlled by userspace or in case the pipeline features an IIF entity,
as in the VSPX case.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250401-v4h-iif-v7-2-cc547c0bddd5@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add support for the SM8650 platform by re-using the SM8550
definitions and using the vpu33 ops.
Move the Sm8650 reset tables that differs in a per-SoC platform
header, that will contain mode SoC specific data when
more codecs are introduced.
The SM8650/vpu33 requires more reset lines, but the H.264
decoder capabilities are identical.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e Dell
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The IRIS acceleration found in the SM8650 platforms uses the vpu33
hardware version, and requires a slighly different reset and power off
sequences in order to properly get out of runtime suspend.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e Dell
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introduce an optional controller_rst_tbl use to store reset lines
used to reset part of the controller.
This is necessary for the vpu3 support, when the xo reset line
must be asserted separately from the other reset line
on power off operation.
Factor the iris_init_resets() logic to allow requesting
multiple reset tables.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e Dell
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Set the queue lock to &video->queue_lock, which makes it possible to drop
the wait_prepare/finish callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Note that the lock field of struct video_device is never set in this
driver, so the core v4l2_ioctl.c function v4l2_ioctl_get_lock() will never
take a lock.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In fimc_is_hw_change_mode(), the function changes camera modes without
waiting for hardware completion, risking corrupted data or system hangs
if subsequent operations proceed before the hardware is ready.
Add fimc_is_hw_wait_intmsr0_intmsd0() after mode configuration, ensuring
hardware state synchronization and stable interrupt handling.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If an error occurs during the initialization of `pdev_display`,
the allocated platform device `pdev_capture` is not released properly,
leading to a memory leak.
Adjust error path handling to fix the leak.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 43acb728bb ("media: davinci: vpif: fix use-after-free on driver unbind")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Nikiforov <Dm1tryNk@yandex.ru>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Convert to use devm_kmemdup_array() and while at it, make the size robust
against type changes.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Convert to use devm_kmemdup_array() and while at it, make the size robust
against type changes.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
