dm_cache_size() and dm_cache_dump() are unused since commit
b29d4986d0 ("dm cache: significant rework to leverage dm-bio-prison-v2")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm_cache_size() has been unused since the original commit
c6b4fcbad0 ("dm: add cache target")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm_cache_dump() has been unused since the original commit
c6b4fcbad0 ("dm: add cache target")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
btracker_nr_writebacks_queued() has been unused since commit
2e63309507 ("dm cache policy smq: don't do any writebacks unless IDLE")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
For compiling with W=1, the following warning can be seen:
drivers/md/raid5.c: In function ‘setup_conf’:
drivers/md/raid5.c:2423:12: error: ‘%s’ directive output may be truncated writing up to 31 bytes into a region of size between 16 and 26 [-Werror=format-truncation=]
"raid%d-%s", conf->level, mdname(conf->mddev));
^~
drivers/md/raid5.c:2422:3: note: ‘snprintf’ output between 7 and 48 bytes into a destination of size 32
snprintf(conf->cache_name[0], namelen,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"raid%d-%s", conf->level, mdname(conf->mddev));
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Increase the array size to avoid this warning.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241112161019.4154616-2-john.g.garry@oracle.com
Signed-off-by: Song Liu <song@kernel.org>
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper. This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.
Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104073955.112324-3-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241108154657.845768-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit 4c39529663 adds a warning about duplicate cache names if
CONFIG_DEBUG_VM is selected. These warnings are triggered by the dm-cache
code.
The dm-cache code allocates a slab cache for each device. This commit
changes it to allocate just one slab cache in the module init function.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 4c39529663 ("slab: Warn on duplicate cache names when DEBUG_VM=y")
The commit 4c39529663 adds a warning about duplicate cache names if
CONFIG_DEBUG_VM is selected. These warnings are triggered by the dm-bufio
code. The dm-bufio code allocates a slab cache with each client. It is
not possible to preallocate the caches in the module init function
because the size of auxiliary per-buffer data is not known at this point.
So, this commit changes dm-bufio so that it appends a unique atomic value
to the cache name, to avoid the warnings.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 4c39529663 ("slab: Warn on duplicate cache names when DEBUG_VM=y")
Add proper bio_split() error handling. For any error, call
raid_end_bio_io() and return.
For the case of an in the write path, we need to undo the increment in
the rdev pending count and NULLify the r1_bio->bios[] pointers.
For read path failure, we need to undo rdev pending count increment from
the earlier read_balance() call.
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241111112150.3756529-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One customer reports a bug: raid5 is hung when changing thread cnt
while resync is running. The stripes are all in conf->handle_list
and new threads can't handle them.
Commit b39f35ebe8 ("md: don't quiesce in mddev_suspend()") removes
pers->quiesce from mddev_suspend/resume. Before this patch, mddev_suspend
needs to wait for all ios including sync io to finish. Now it's used
to only wait normal io.
Fix this by calling raid5_quiesce from raid5_store_group_thread_cnt
directly to wait all sync requests to finish before changing the group
cnt.
Fixes: b39f35ebe8 ("md: don't quiesce in mddev_suspend()")
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20241106095124.74577-1-xni@redhat.com
Signed-off-by: Song Liu <song@kernel.org>
Pull device mapper fixes from Mikulas Patocka:
- fix memory safety bugs in dm-cache
- fix restart/panic logic in dm-verity
- fix 32-bit unsigned integer overflow in dm-unstriped
- fix a device mapper crash if blk_alloc_disk fails
* tag 'for-6.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix potential out-of-bounds access on the first resume
dm cache: optimize dirty bit checking with find_next_bit when resizing
dm cache: fix out-of-bounds access to the dirty bitset when resizing
dm cache: fix flushing uninitialized delayed_work on cache_ctr error
dm cache: correct the number of origin blocks to match the target length
dm-verity: don't crash if panic_on_corruption is not selected
dm-unstriped: cast an operand to sector_t to prevent potential uint32_t overflow
dm: fix a crash if blk_alloc_disk fails
Currently raid1 is preparing IO for underlying disks while checking if
any disk is blocked, if so allocated resources must be released, then
waiting for rdev to be unblocked and try to prepare IO again.
Make code cleaner by checking blocked rdev first, it doesn't matter if
rdev is blocked while issuing IO, the IO will wait for rdev to be
unblocked or not.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Tested-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Link: https://lore.kernel.org/r/20241031033114.3845582-5-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Faulty will be checked before issuing IO to the rdev, however, rdev can
be faulty at any time, hence it's possible that rdev_set_badblocks()
will be called for faulty rdev. In this case, mddev->sb_flags will be
set and some other path can be blocked by updating super block.
Since faulty rdev will not be accesed anymore, there is no need to
record new babblocks for faulty rdev and forcing updating super block.
Noted this is not a bugfix, just prevent updating superblock in some
corner cases, and will help to slice a bug related to external
metadata[1], testing also shows that devices are removed faster in the
case IO error.
[1] https://lore.kernel.org/all/f34452df-810b-48b2-a9b4-7f925699a9e7@linux.intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Tested-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Link: https://lore.kernel.org/r/20241031033114.3845582-4-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper. This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.
Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104073955.112324-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Out-of-bounds access occurs if the fast device is expanded unexpectedly
before the first-time resume of the cache table. This happens because
expanding the fast device requires reloading the cache table for
cache_create to allocate new in-core data structures that fit the new
size, and the check in cache_preresume is not performed during the
first resume, leading to the issue.
Reproduce steps:
1. prepare component devices:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
2. load a cache table of 512 cache blocks, and deliberately expand the
fast device before resuming the cache, making the in-core data
structures inadequate.
dmsetup create cache --notable
dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache
3. suspend the cache to write out the in-core dirty bitset and hint
array, leading to out-of-bounds access to the dirty bitset at offset
0x40:
dmsetup suspend cache
KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80
Read of size 8 at addr ffffc90000085040 by task dmsetup/90
(...snip...)
The buggy address belongs to the virtual mapping at
[ffffc90000085000, ffffc90000087000) created by:
cache_ctr+0x176a/0x35f0
(...snip...)
Memory state around the buggy address:
ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fix by checking the size change on the first resume.
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: f494a9c6b1 ("dm cache: cache shrinking support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
When shrinking the fast device, dm-cache iteratively searches for a
dirty bit among the cache blocks to be dropped, which is less efficient.
Use find_next_bit instead, as it is twice as fast as the iterative
approach with test_bit.
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: f494a9c6b1 ("dm cache: cache shrinking support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
An unexpected WARN_ON from flush_work() may occur when cache creation
fails, caused by destroying the uninitialized delayed_work waker in the
error path of cache_create(). For example, the warning appears on the
superblock checksum error.
Reproduce steps:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/urandom of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
Kernel logs:
(snip)
WARNING: CPU: 0 PID: 84 at kernel/workqueue.c:4178 __flush_work+0x5d4/0x890
Fix by pulling out the cancel_delayed_work_sync() from the constructor's
error path. This patch doesn't affect the use-after-free fix for
concurrent dm_resume and dm_destroy (commit 6a459d8edb ("dm cache: Fix
UAF in destroy()")) as cache_dtr is not changed.
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: 6a459d8edb ("dm cache: Fix UAF in destroy()")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
When creating a cache device, the actual size of the cache origin might
be greater than the specified cache target length. In such case, the
number of origin blocks should match the cache target length, not the
full size of the origin device, since access beyond the cache target is
not possible. This issue occurs when reducing the origin device size
using lvm, as lvreduce preloads the new cache table before resuming the
cache origin, which can result in incorrect sizes for the discard bitset
and smq hotspot blocks.
Reproduce steps:
1. create a cache device consists of 4096 origin blocks
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. reduce the cache origin to 2048 oblocks, in lvreduce's approach
dmsetup reload corig --table "0 262144 linear /dev/sdc 262144"
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup suspend cache
dmsetup suspend corig
dmsetup suspend cdata
dmsetup suspend cmeta
dmsetup resume corig
dmsetup resume cdata
dmsetup resume cmeta
dmsetup resume cache
3. shutdown the cache, and check the number of discard blocks in
superblock. The value is expected to be 2048, but actually is 4096.
dmsetup remove cache corig cdata cmeta
dd if=/dev/sdc bs=1c count=8 skip=224 2>/dev/null | hexdump -e '1/8 "%u\n"'
Fix by correcting the origin_blocks initialization in cache_create and
removing the unused origin_sectors from struct cache_args accordingly.
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: c6b4fcbad0 ("dm: add cache target")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>
If the user sets panic_on_error and doesn't set panic_on_corruption,
dm-verity should not panic on data mismatch. But, currently it panics,
because it treats data mismatch as I/O error.
This commit fixes the logic so that if there is data mismatch and
panic_on_corruption or restart_on_corruption is not selected, the system
won't restart or panic.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Fixes: f811b83879 ("dm-verity: introduce the options restart_on_error and panic_on_error")
This was found by a static analyzer.
There may be a potential integer overflow issue in
unstripe_ctr(). uc->unstripe_offset and uc->unstripe_width are
defined as "sector_t"(uint64_t), while uc->unstripe,
uc->chunk_size and uc->stripes are all defined as "uint32_t".
The result of the calculation will be limited to "uint32_t"
without correct casting.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: 18a5bf2705 ("dm: add unstriped target")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Pull block fixes from Jens Axboe:
- Pull request for MD via Song fixing a few issues
- Fix a wrong check in blk_rq_map_user_bvec(), causing IO errors on
passthrough IO (Xinyu)
* tag 'block-6.12-20241026' of git://git.kernel.dk/linux:
block: fix sanity checks in blk_rq_map_user_bvec
md/raid10: fix null ptr dereference in raid10_size()
md: ensure child flush IO does not affect origin bio->bi_status
When a flush is issued to an RAID array, a child flush IO is created and
issued for each member disk in the RAID array. Since commit b75197e86e
("md: Remove flush handling"), each child flush IO has been chained with
the original bio. As a result, the failure of any child IO could modify
the bi_status of the original bio, potentially impacting the upper-layer
filesystem.
Fix the issue by preventing child flush IO from altering the original
bio->bi_status as before. However, this design introduces a known
issue: in the event of a power failure, if a flush IO on a member
disk fails, the upper layers may not be informed. This issue is not easy
to fix and will not be addressed for the time being in this issue.
Fixes: b75197e86e ("md: Remove flush handling")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240919063048.2887579-1-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> includes, replacing
them with a single generic <linux/unaligned.h> header file.
It's the second largest (after asm/io.h) class of asm/* includes, and
all but two architectures actually end up using exact same file.
Massage the remaining two (arc and parisc) to do the same and just
move the thing to from asm-generic/unaligned.h to linux/unaligned.h"
[ This is one of those things that we're better off doing outside the
merge window, and would only cause extra conflict noise if it was in
linux-next for the next release due to all the trivial #include line
updates. Rip off the band-aid. - Linus ]
* tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move asm/unaligned.h to linux/unaligned.h
arc: get rid of private asm/unaligned.h
parisc: get rid of private asm/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
This patch introduces the options restart_on_error and panic_on_error on
dm-verity.
Previously, restarting on error was handled by the patch
e6a3531dd5, but Google engineers wanted to
have a special option for it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Will Drewry <wad@chromium.org>
This reverts commit e6a3531dd5.
The problem that the commit e6a3531dd5
fixes was reported as a security bug, but Google engineers working on
Android and ChromeOS didn't want to change the default behavior, they
want to get -EIO rather than restarting the system, so I am reverting
that commit.
Note also that calling machine_restart from the I/O handling code is
potentially unsafe (the reboot notifiers may wait for the bio that
triggered the restart), but Android uses the reboot notifiers to store
the reboot reason into the PMU microcontroller, so machine_restart must
be used.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e6a3531dd5 ("dm-verity: restart or panic on an I/O error")
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Will Drewry <wad@chromium.org>
Pull device mapper updates from Mikulas Patocka:
- Misc VDO fixes
- Remove unused declarations dm_get_rq_mapinfo() and dm_zone_map_bio()
- Dm-delay: Improve kernel documentation
- Dm-crypt: Allow to specify the integrity key size as an option
- Dm-bufio: Remove pointless NULL check
- Small code cleanups: Use ERR_CAST; remove unlikely() around IS_ERR;
use __assign_bit
- Dm-integrity: Fix gcc 5 warning; convert comma to semicolon; fix
smatch warning
- Dm-integrity: Support recalculation in the 'I' mode
- Revert "dm: requeue IO if mapping table not yet available"
- Dm-crypt: Small refactoring to make the code more readable
- Dm-cache: Remove pointless error check
- Dm: Fix spelling errors
- Dm-verity: Restart or panic on an I/O error if restart or panic was
requested
- Dm-verity: Fallback to platform keyring also if key in trusted
keyring is rejected
* tag 'for-6.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm verity: fallback to platform keyring also if key in trusted keyring is rejected
dm-verity: restart or panic on an I/O error
dm: fix spelling errors
dm-cache: remove pointless error check
dm vdo: handle unaligned discards correctly
dm vdo indexer: Convert comma to semicolon
dm-crypt: Use common error handling code in crypt_set_keyring_key()
dm-crypt: Use up_read() together with key_put() only once in crypt_set_keyring_key()
Revert "dm: requeue IO if mapping table not yet available"
dm-integrity: check mac_size against HASH_MAX_DIGESTSIZE in sb_mac()
dm-integrity: support recalculation in the 'I' mode
dm integrity: Convert comma to semicolon
dm integrity: fix gcc 5 warning
dm: Make use of __assign_bit() API
dm integrity: Remove extra unlikely helper
dm: Convert to use ERR_CAST()
dm bufio: Remove NULL check of list_entry()
dm-crypt: Allow to specify the integrity key size as option
dm: Remove unused declaration and empty definition "dm_zone_map_bio"
dm delay: enhance kernel documentation
...
If enabled, we fallback to the platform keyring if the trusted keyring doesn't have
the key used to sign the roothash. But if pkcs7_verify() rejects the key for other
reasons, such as usage restrictions, we do not fallback. Do so.
Follow-up for 6fce1f40e9
Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Maxim Suhanov reported that dm-verity doesn't crash if an I/O error
happens. In theory, this could be used to subvert security, because an
attacker can create sectors that return error with the Write Uncorrectable
command. Some programs may misbehave if they have to deal with EIO.
This commit fixes dm-verity, so that if "panic_on_corruption" or
"restart_on_corruption" was specified and an I/O error happens, the
machine will panic or restart.
This commit also changes kernel_restart to emergency_restart -
kernel_restart calls reboot notifiers and these reboot notifiers may wait
for the bio that failed. emergency_restart doesn't call the notifiers.
Reported-by: Maxim Suhanov <dfirblog@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
