Before each I2C transfer using DMA, the I2C buffer is DMA'pped to make
sure the memory buffer is DMA'able. This is handle in the function
`stm32_i2c_prep_dma_xfer()`.
If the transfer fails for any reason the I2C buffer must be unmap.
Use the dma_callback to factorize the code and fix this issue.
Note that the `stm32f7_i2c_dma_callback()` is now called in case of DMA
transfer success and error and that the `complete()` on the dma_complete
completion structure is done inconditionnally in case of transfer
success or error as well as the `dmaengine_terminate_async()`.
This is allowed as a `complete()` in case transfer error has no effect
as well as a `dmaengine_terminate_async()` on a transfer success.
Also fix the unneeded cast and remove not more needed variables.
Fixes: 7ecc8cfde5 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: <stable@vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-2-84a095a2c728@foss.st.com
Pull i2c fixes from Wolfram Sang:
- designware: initialise msg_write_idx during transfer
- microchip: check return value from core xfer call
- realtek: add 'reg' property constraint to the device tree
* tag 'i2c-for-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: realtek,rtl9301: Fix missing 'reg' constraint
i2c: microchip-core: re-fix fake detections w/ i2cdetect
i2c/designware: Fix an initialization issue
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Mostly a few lines fixed here and there except amd/isp4 which improves
swnodes relationships but that is a new driver not in any stable
kernels yet. The think-lmi driver changes also look relatively large
but there are just many fixes to it.
The i2c/piix4 change is a effectively a revert of the commit
7e173eb82a ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on
CONFIG_X86") but that required moving the header out from arch/x86
under include/linux/platform_data/
Summary:
- amd/isp4: Improve swnode graph (new driver exception)
- asus-nb-wmi: Use duo keyboard quirk for Zenbook Duo UX8406CA
- dell-lis3lv02d: Add Latitude 5500 accelerometer address
- dell-wmi-sysman: Fix WMI data block retrieval and class dev unreg
- hp-bioscfg: Fix class device unregistration
- i2c: piix4: Re-enable on non-x86 + move FCH header under platform_data/
- intel/hid: Wildcat Lake support
- mellanox:
- mlxbf-pmc: Fix duplicate event ID
- mlxbf-tmfifo: Fix vring_desc.len assignment
- mlxreg-lc: Fix bit-not-set logic check
- nvsw-sn2201: Fix bus number in error message & spelling errors
- portwell-ec: Move watchdog device under correct platform hierarchy
- think-lmi: Error handling fixes (sysfs, kset, kobject, class dev unreg)
- thinkpad_acpi: Handle HKEY 0x1402 event (2025 Thinkpads)
- wmi: Fix WMI event enablement"
* tag 'platform-drivers-x86-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: think-lmi: Fix sysfs group cleanup
platform/x86: think-lmi: Fix kobject cleanup
platform/x86: think-lmi: Create ksets consecutively
platform/mellanox: mlxreg-lc: Fix logic error in power state check
i2c: Re-enable piix4 driver on non-x86
Move FCH header to a location accessible by all archs
platform/x86/intel/hid: Add Wildcat Lake support
platform/x86: dell-wmi-sysman: Fix class device unregistration
platform/x86: think-lmi: Fix class device unregistration
platform/x86: hp-bioscfg: Fix class device unregistration
platform/x86: Update swnode graph for amd isp4
platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks
platform/x86: wmi: Update documentation of WCxx/WExx ACPI methods
platform/x86: wmi: Fix WMI event enablement
platform/mellanox: nvsw-sn2201: Fix bus number in adapter error message
platform/mellanox: Fix spelling and comment clarity in Mellanox drivers
platform/mellanox: mlxbf-pmc: Fix duplicate event ID for CACHE_DATA1
platform/x86: thinkpad_acpi: handle HKEY 0x1402 event
platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CA
platform/x86: dell-lis3lv02d: Add Latitude 5500
...
Introducing support for smbus re-broke i2cdetect, causing it to detect
devices at every i2c address, just as it did prior to being fixed in
commit 49e1f0fd0d ("i2c: microchip-core: fix "ghost" detections").
This was caused by an oversight, where the new smbus code failed to
check the return value of mchp_corei2c_xfer(). Check it, and propagate
any errors.
Fixes: d6ceb40538 ("i2c: microchip-corei2c: add smbus support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250630-shopper-proven-500f4075e7d6@spud
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82a
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It already depends on X86_32, but that's also set for ARCH=um.
Recent changes made UML no longer have IO port access since
it's not needed, but this driver uses it. Build it only for
HAS_IOPORT. This is pretty much the same as depending on X86,
but on the off-chance that HAS_IOPORT will ever be optional
on x86 HAS_IOPORT is the real prerequisite.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acknowledge the byte count submitted by the target.
When I2C_SMBUS_BLOCK_DATA read operation is executed by
i2c_smbus_xfer_emulated(), the length of the second (read) message is set
to 1. Length of the block is supposed to be obtained from the target by the
underlying bus driver.
The i2c_imx_isr_read() function should emit the acknowledge on i2c bus
after reading the first byte (i.e., byte count) while processing such
message (as defined in Section 6.5.7 of System Management Bus
Specification [1]). Without this acknowledge, the target does not submit
subsequent bytes and the controller only reads 0xff's.
In addition, store the length of block data obtained from the target in
the buffer provided by i2c_smbus_xfer_emulated() - otherwise the first
byte of actual data is erroneously interpreted as length of the data
block.
[1] https://smbus.org/specs/SMBus_3_3_20240512.pdf
Fixes: 5f5c2d4579 ("i2c: imx: prevent rescheduling in non dma mode")
Signed-off-by: Lukasz Kucharczyk <lukasz.kucharczyk@leica-geosystems.com>
Cc: <stable@vger.kernel.org> # v6.13+
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250520122252.1475403-1-lukasz.kucharczyk@leica-geosystems.com
If spacemit_i2c_xfer_msg() times out waiting for a message transfer to
complete, or if the hardware reports an error, it returns a negative
error code (-ETIMEDOUT, -EAGAIN, -ENXIO. or -EIO).
The sole caller of spacemit_i2c_xfer_msg() is spacemit_i2c_xfer(),
which is the i2c_algorithm->xfer callback function. It currently
does not save the value returned by spacemit_i2c_xfer_msg().
The result is that transfer errors go unreported, and a caller
has no indication anything is wrong.
When this code was out for review, the return value *was* checked
in early versions. But for some reason, that assignment got dropped
between versions 5 and 6 of the series, perhaps related to reworking
the code to merge spacemit_i2c_xfer_core() into spacemit_i2c_xfer().
Simply assigning the value returned to "ret" fixes the problem.
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Alex Elder <elder@riscstar.com>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Troy Mitchell <troymitchell988@gmail.com>
Link: https://lore.kernel.org/r/20250616125137.1555453-1-elder@riscstar.com
Signed-off-by: Andi Shyti <andi@smida.it>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Convert the I2C subsystem to drop using the 'master_'-prefixed callbacks
in favor of the simplified ones. Fix alignment of '=' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Pull i2c updates from Wolfram Sang:
"Core updates:
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates:
- support per-channel alias pools
- added support for dynamic address translation (also adds FPC202
driver as its user)
- add 'static' and 'passthrough' flags
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)"
* tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits)
i2c: Use str_read_write() helper
i2c: mlxbf: avoid 64-bit division
i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function
i2c: designware: Don't warn about missing get_clk_rate_khz
i2c: designware: Invoke runtime suspend on quick slave re-registration
i2c-mlxbf: Improve I2C bus timing configuration
i2c-mlxbf: Add repeated start condition support
i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function
dt-bindings: i2c: i2c-wmt: Convert to YAML
i2c: microchip-corei2c: add smbus support
i2c: mlxbf: Allow build with COMPILE_TEST
i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP
i2c: atr: add passthrough flag
i2c: atr: add static flag
i2c: atr: allow replacing mappings in attach_addr()
i2c: atr: deduplicate logic in attach_addr()
i2c: atr: do not create mapping in detach_addr()
i2c: atr: split up i2c_atr_get_mapping_by_addr()
i2c: atr: find_mapping() -> get_mapping()
i2c: atr: Fix lockdep for nested ATRs
...
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
The 64-bit division in mlxbf_i2c_get_ticks() causes link failures
when compile-testing on 32-bit machines:
ERROR: modpost: "__udivdi3" [drivers/i2c/busses/i2c-mlxbf.ko] undefined!
Change this to a div_u64(), which should replace the constant division
with a a multiply/shift combination in the mlxbf_i2c_get_ticks().
The frequency calculation functions require a slow library call but
should be used much rarer.
Fixes: 053859002c ("i2c: mlxbf: Allow build with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250520152600.1975628-1-arnd@kernel.org
Signed-off-by: Andi Shyti <andi@smida.it>
Converting the WARN_ON() to a dev_dbg() message in
i2c_dw_clk_rate().
That removes the need to supply a dummy implementation for
the callback (or alternatively a dummy clk device) when the
fallback path is preferred where the existing values already
in the clock registers are used - when a firmware has
programmed the clock registers.
The fallback path was introduced in commit 4fec76e098
("i2c: designware: Fix wrong setting for {ss,fs,hs}_{h,l}cnt
registers").
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250513124015.2568924-1-heikki.krogerus@linux.intel.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Replaced pm_runtime_put() with pm_runtime_put_sync_suspend() to ensure
the runtime suspend is invoked immediately when unregistering a slave.
This prevents a race condition where suspend was skipped when
unregistering and registering slave in quick succession.
For example, consider the rapid sequence of
`delete_device -> new_device -> delete_device -> new_device`.
In this sequence, it is observed that the dw_i2c_plat_runtime_suspend()
might not be invoked after `delete_device` operation.
This is because after `delete_device` operation, when the
pm_runtime_put() is about to trigger suspend, the following `new_device`
operation might race and cancel the suspend.
If that happens, during the `new_device` operation,
dw_i2c_plat_runtime_resume() is skipped (since there was no suspend), which
means `i_dev->init()`, i.e. i2c_dw_init_slave(), is skipped.
Since i2c_dw_init_slave() is skipped, i2c_dw_configure_fifo_slave() is
skipped too, which leaves `DW_IC_INTR_MASK` unconfigured. If we inspect
the interrupt mask register using devmem, it will show as zero.
Example shell script to reproduce the issue:
```
#!/bin/sh
SLAVE_LADDR=0x1010
SLAVE_BUS=13
NEW_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/new_device
DELETE_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/delete_device
# Create initial device
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
sleep 2
# Rapid sequence of
# delete_device -> new_device -> delete_device -> new_device
echo $SLAVE_LADDR > $DELETE_DEVICE
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
echo $SLAVE_LADDR > $DELETE_DEVICE
echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
# Using devmem to inspect IC_INTR_MASK will show as zero
```
Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250412023303.378600-1-ende.tan@starfivetech.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Update the I2C bus timing configuration on BlueField to match the
configuration recommended and verified by the HW team.
I2C block read failures were found on BlueField 3 during communication
with a device that requires the use of repeated start conditions.
Testing showed that these failures were caused by the I2C transaction
getting aborted early due to a short bus "timeout" configuration value.
This value determines how long the clock can be held low before the I2C
transaction is aborted.
Upon further inspection, it was also found that other I2C bus timing
configuration values used by the kernel driver do not match the
configuration that is recommended by the HW team and used in the
BlueField BSP I2C drivers.
Signed-off-by: Chris Babroski <cbabroski@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Link: https://lore.kernel.org/r/20250506193059.321345-2-cbabroski@nvidia.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
thunderx enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417082511.22272-3-phasta@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
ismt enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_region() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Replace the call to sometimes-managed pci_request_region() with one to
the always-managed pcim_request_region().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417082511.22272-2-phasta@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The hardware (supposedly) has a 25ms timeout for clock stretching
and the driver uses 100ms which should be plenty.
The interrupt path however misses handling for errors while waiting for
the completion and the polling path uses an open-coded readx_poll_timeout.
Note that we drop reg_write(smbus, REG_SMSTA, status) while fixing those
issues here which will be done anyway whenever the next transaction starts
via pasemi_smb_clear.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-2-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The I2C bus can get stuck under some conditions (desync between
controller and device). The pasemi controllers include an unjam feature
that is enabled on reset, but was being disabled by the driver. Keep it
enabled by explicitly setting the UJM bit in the CTL register. This
should help recover the bus from certain conditions, which would
otherwise remain stuck forever.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-1-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
