Add a selftest for VXLAN vnifilter netlink notifications that verifies
RTM_NEWTUNNEL and RTM_DELTUNNEL are sent correctly when VNIs are added,
deleted, or updated, and that no spurious notifications are sent when
a VNI is re-added with the same attributes.
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260602185138.253265-4-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test to verify that when a skb is partially consumed,
unix_inq_len() return correct remaining byte count.
Before:
# RUN scm_inq.stream.partial_read ...
# scm_inq.c:165:partial_read:Expected remain (512) == *(int *)CMSG_DATA(cmsg) (768)
# partial_read: Test terminated by assertion
# FAIL scm_inq.stream.partial_read
not ok 2 scm_inq.stream.partial_read
After:
# RUN scm_inq.stream.partial_read ...
# OK scm_inq.stream.partial_read
ok 2 scm_inq.stream.partial_read
Signed-off-by: Jianyu Li <jianyu.li@mediatek.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260601113640.231897-3-jianyu.li@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chris Adams reported that preserving insertion order for same-scope
addresses is causing SSH connections to be dropped after stopping a VM
while running NetworkManager.
NetworkManager caches the IPv6 address configuration, when a RA arrives,
it determines the list of addresses to configure and checks if the
addresses are already in the right order in the kernel. If they aren't,
NetworkManager removes and re-adds them to achieve the desired order.
As the order changes, NetworkManager is confused and reconfigures the
addresses on every update. In addition, this would also affect to cloud
tooling that relies on IPv6 addresses order to identify primary and
secondaries addresses.
This reverts commit cb3de96eea.
Fixes: cb3de96eea ("ipv6: preserve insertion order for same-scope addresses")
Reported-by: Chris Adams <linux@cmadams.net>
Closes: https://lore.kernel.org/netdev/20260521135310.GC977@cmadams.net/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260529112357.5079-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
netfilter: updates for net
Patches 7+8 fix a regression from 7.1-rc1. Everything else
is from 2.6.x to 5.3 releases. There are additional known
issues with these patches (drive-by-findings in related code).
There are many old bugs all over netfilter and our ability to review
feature patches has come to a complete halt due to lack of time.
There are further security bugs that we cannot address
due to lack of time, maintainers and reviewers.
Other remarks: The xtables 32bit compat interface is already
off in many vendor kernels, the plan is to remove it soon.
1) Prevent RST packets with invalid sequence numbers from forcing TCP
connections into the CLOSE state without a direction check.
From Hamza Mahfooz.
2) Re-derive the TCP header pointer after skb_ensure_writable in
synproxy_tstamp_adjust. Prevent use-after-free and invalid checksum
updates caused by stale pointers during buffer expansion.
From Chris Mason.
3) Fix a race condition causing keymap list corruption in conntracks gre/pptp
helper.
4) Use raw_smp_processor_id() in xt_cpu to prevent splats under
PREEMPT_RCU.
5) Disable netfilter payload mangling in user namespaces (nft_payload.c
and nf_queue).
TCP option mangling via nft_exthdr.c remains enabled.
There will be followups here to restrict resp. revalidate
headers.
6) Fix an out-of-bounds read in ebtables's compat_mtw_from_user function.
7) Use list_for_each_entry_rcu() to traverse fib6_siblings in
nft_fib6_info_nh_uses_dev(). Ensure safe list walking under RCU.
8) Fix an out-of-bounds read in nft_fib_ipv6 caused by incorrect list
traversal.
9) Add nft_fib_nexthop selftest to netfilter. Cover nexthop enumeration for
single, group, and multipath route shapes.
All three nft_fib6 fixes from Jiayuan Chen.
10) Fix destination corruption in shift operations when source and destination
registers overlap. Reject partial register overlap for all operations
from control plane. From Fernando Fernandez Mancera.
* tag 'nf-26-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix dst corruption in same register operation
selftests: netfilter: add nft_fib_nexthop test
netfilter: nft_fib_ipv6: handle routes via external nexthop
netfilter: nft_fib_ipv6: walk fib6_siblings under RCU
netfilter: ebtables: fix OOB read in compat_mtw_from_user
netfilter: disable payload mangling in userns
netfilter: xt_cpu: prefer raw_smp_processor_id
netfilter: nf_conntrack_gre: fix gre keymap list corruption
netfilter: synproxy: refresh tcphdr after skb_ensure_writable
netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check
====================
Link: https://patch.msgid.link/20260522104257.2008-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Functional coverage of nft_fib6_eval()'s nexthop enumeration over
three route shapes:
1) single external nexthop (nhid)
2) external nexthop group (nhid -> group)
3) old-style multipath (nexthop ... nexthop ...)
Each scenario places one nexthop on the input device (veth0). For
(2) and (3) the matching nexthop is the second member, so the walk
has to traverse beyond the primary nh. Two nft counters on prerouting
verify the data path: one increments only when fib reports veth0 as
the oif, the other counts "missing" results and must stay at zero.
./nft_fib_nexthop.sh
PASS: single external nexthop (nhid -> veth0)
PASS: nexthop group (dummy0 + veth0)
PASS: old-style multipath (sibling on veth0)
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
Data adjustment cases failed with "Data exchange failed" when using IPv4
because the program did not update the IP and UDP checksums in the IPv4
branch. The issue was masked when both IPv4 and IPv6 were configured,
since the test harness prefers IPv6.
While here, generalize csum_fold_helper() to fold twice so it works for
any 32-bit input.
Fixes: 0b65cfcef9 ("selftests: drv-net: Test tail-adjustment support")
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260520153928.3371765-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The run.sh script explicitly checks that CONFIG_MODULES is disabled.
By default, this config option is enabled. Explicitly disable it to be
able to run the RDS tests.
Note that writing '# CONFIG_(...) is not set' is usually recommended to
disable an option in the .config, but it looks like selftests usually
set 'CONFIG_(...)=n', which looks clearer.
Fixes: 0f5d680047 ("selftests: rds: add tools/testing/selftests/net/rds/config")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260520-net-rds-config-modules-v1-1-2100df02fe9a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using the format specifier +%s%3N with GNU date is honoured, and only
prints 3 digits of the nanoseconds portion of the seconds since epoch,
which corresponds to the milliseconds.
The uutils implementation of date currently does not honour this, and
always prints all 9 digits. This is a known issue [1], but can be worked
around by adapting this test to use nanoseconds instead of microseconds,
and then divide it by 1e6.
This fix is similar to what has been done on systemd side [2], and it is
needed to run the selftests on Ubuntu 26.04, containing uutils 0.8.0.
Note that the Fixes tag is there even if this patch doesn't fix an issue
in the kernel selftests, but it is useful for those using uutils 0.8.0.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Link: https://github.com/uutils/coreutils/issues/11658 [1]
Link: https://github.com/systemd/systemd/pull/41627 [2]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-6-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend add_addr_ports_tests with IPv6 signaling cases that exercise
ADD_ADDR tx-space shortage when tcp_timestamps are enabled.
Add one case to verify PM still progresses to later signal endpoints
after the first one is dropped.
This covers both failure accounting and the non-blocking behavior of
the announce list after a tx-space drop on pure ACK.
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-3-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 201ba70631 ("selftests: ovpn: reduce ping count in test.sh")
lowered the baseline traffic flood ping count to avoid flakes on slower
CI instances, however some instances were left out.
Apply the same limit to the remaining ovpn selftest flood pings that
still request 500 packets.
Fixes: 201ba70631 ("selftests: ovpn: reduce ping count in test.sh")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
When pm_netlink.sh is executed with '-i', 'ip mptcp' is used instead of
'pm_nl_ctl'. IPRoute2 doesn't support the 'unknown' flag, which has only
been added to 'pm_nl_ctl' for this specific check: to ensure that the
kernel ignores such unsupported flag.
No reason to add this flag to 'ip mptcp'. Then, this check should be
skipped when 'ip mptcp' is used.
Fixes: 0cef6fcac2 ("selftests: mptcp: ip_mptcp option for more scripts")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-11-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using '${?}' inside the if-statement to check the returned value from
the command that was evaluated as part of the if-statement is not
correct: here, '${?}' will be linked to the previous instruction, not
the one that is expected here (${cmd}).
Instead, simply mark the error, except if an error is expected. If
that's the case, 1 can be passed as the 4th argument of this helper.
Three checks from pm_netlink.sh expect an error.
While at it, improve the error message when the command unexpectedly
fails or succeeds.
Note that we could expect a specific returned value, but the checks
currently expecting an error can be used with 'ip mptcp' or 'pm_nl_ctl',
and these two tools don't return the same error code.
Fixes: 2d0c1d27ea ("selftests: mptcp: add mptcp_lib_check_output helper")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-10-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antonio Quartulli says:
====================
Includes changes:
* ensure MAC header offset is reset before delivering packet
* ensure gro_cells_receive() and dstats_dev_add() are called
with BH disabled
* reduce ping count in selftest to ensure it completes within
timeout
* tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next:
selftests: ovpn: reduce ping count in test.sh
ovpn: ensure packet delivery happens with BH disabled
ovpn: reset MAC header before passing skb up
====================
Link: https://patch.msgid.link/20260504230305.2681646-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There were a few issues found with the tunnel vport types around the
vport destruction code. Add some basic tests, so at least we know that
they can be properly added and removed without obvious issues.
The test creates OVS datapath, adds a non-LWT tunnel port, makes sure
they are created, and then removes the datapath and waits for all the
ports to be gone.
The dpctl script had a few bugs in the none-lwt tunnel creation code,
so fixing them as well to make the testing possible:
- The type of the --lwt option changed in order to properly disable it.
- Removed byte order conversion for the port numbers, as the value
supposed to be in the host order.
- Added missing 'gre' choice for the tunnel type.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260430233848.440994-3-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The second stage of test.sh ("run baseline data traffic") performs a
basic connectivity check with ping -qfc 500 -w 3. On slower CI
instances this is too strict for TCP: the RTT is high enough that 500
echo requests do not reliably complete within 3 seconds, so the stage
flakes and the test fails even though the ovpn setup is healthy.
Reduce the packet count to 100 for both the plain and 3000-byte pings in
that stage. This still verifies peer setup, key exchange, routing, and
data-path traffic, without making the basic connectivity check depend on
timing out under load.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Without the previous commit, TCP failed to switch to alternative
IPv6 routes immediately upon carrier loss.
It would persist with the dead route until reaching the threshold
net.ipv4.tcp_retries1, leading to unnecessary delays in failover.
Let's add a selftest for this scenario to ensure TCP fails over
immediately upon a carrier loss event.
Before:
TEST: TCP IPv4 failover [ OK ]
TEST: TCP IPv6 failover [FAIL]
After:
TEST: TCP IPv4 failover [ OK ]
TEST: TCP IPv6 failover [ OK ]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sagarika Sharma <sharmasagarika@google.com>
Link: https://patch.msgid.link/20260430200909.527827-3-sharmasagarika@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 5961 Section 5.2 / RFC 793 Section 3.9 require a challenge ACK
whenever an incoming SEG.ACK falls outside
[SND.UNA - MAX.SND.WND, SND.NXT]. There is currently no packetdrill
coverage for either edge.
Add tcp_rfc5961_ack-out-of-window.pkt, which in a single passive-open
connection exercises:
- Upper edge (SEG.ACK > SND.NXT): peer ACKs data that was never
sent before the server has transmitted anything.
- Lower edge (SEG.ACK < SND.UNA - MAX.SND.WND): after the server
has sent 2000 bytes (the peer-advertised rwnd forces two 1000-byte
segments, both acknowledged), peer sends an ACK that is older
than the acceptable window.
Both cases must elicit a challenge ACK
<SEQ = SND.NXT, ACK = RCV.NXT, CTL = ACK>. The per-socket RFC 5961
Section 7 rate limit is disabled for the duration of the test so that
both challenge ACKs can fire back-to-back.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 5961 Section 5.2 validates an incoming segment's ACK value
against the range [SND.UNA - MAX.SND.WND, SND.NXT] and states:
"All incoming segments whose ACK value doesn't satisfy the above
condition MUST be discarded and an ACK sent back."
Commit 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack
Mitigation") opted Linux into this mitigation and implements the
challenge ACK on the lower side (SEG.ACK < SND.UNA - MAX.SND.WND),
but the symmetric upper side (SEG.ACK > SND.NXT) still takes the
pre-RFC-5961 path and silently returns
SKB_DROP_REASON_TCP_ACK_UNSENT_DATA, even though RFC 793 Section 3.9
(now RFC 9293 Section 3.10.7.4) has always required:
"If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT)
then send an ACK, drop the segment, and return."
Complete the mitigation by sending a challenge ACK on that branch,
reusing the existing tcp_send_challenge_ack() path which already
enforces the per-socket RFC 5961 Section 7 rate limit via
__tcp_oow_rate_limited(). FLAG_NO_CHALLENGE_ACK is honoured for
symmetry with the lower-edge case.
Update the existing tcp_ts_recent_invalid_ack.pkt selftest, which
drives this exact path, to consume the new challenge ACK.
Fixes: 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Starting one background YNL notification listener per peer back-to-back
can intermittently stall the test setup before the listeners even reach
the Python main function.
This was reproducible in a reduced test.sh setup-only loop: a single
listener stayed stable across repeated runs, while starting listeners
for all peers could hang early in the listener launch phase. Adding a
short delay between listener launches makes the listeners start cleanly
and eliminates the reproduced hangs in repeated normal and slow-runner
tests.
Serialize listener startup with a small sleep between setup_listener
calls.
Fixes: 77de28cd7c ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Current tests do not properly adhere to the TAP infrastructure
therefore they do not properly report failures leading to hangs of
the CI machinery.
Restructure ovpn selftests into using the TAP infrastructure: split each
test in stages, execute stage bodies with fail-fast semantics, and emit
KTAP pass/fail for each stage.
Centralize behavior control in common.sh and makes the scripts use
dedicated wrappers for required-success, expected-failure, and non-fatal
commands. Also add the OVPN_VERBOSE mode that exposes captured command
output for debugging.
This way tests won't hang anymore in case of failure when executed
within the CI machinery.
This change also makes default OVPN_CLI and YNL resolution
independent from the caller CWD by anchoring both to COMMON_DIR, so
behavior is stable across direct execution and run_tests-style
execution.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Current naming for shared variables, helpers and netnamespaces is
a bit unfortunate as it doesn't come with a clean prefix.
This showed to be problematic in case of name clashes with external
scripts or in case of abrupt test termination (hanging netns' weren't
easily reconducible to ovpn).
Rename common helper entry points and all shared globals in the ovpn
selftests to ovpn_ or OVPN_ names so test scripts and wrappers use a
single explicit prefix. Also rename the temporary network namespaces
created by the tests from peerN to ovpn_peerN. This makes leaked
namespaces easier to identify.
This is a mechanical refactor only, behavior is unchanged.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Notification comparison uses jq -s, which slurps all inputs into an
array. Some inputs can be arrays themselves, and applying the .msg.peer
filter directly on those entries triggers jq type errors.
Expand any array-valued JSON items returned by jq -s before selecting
.msg.peer, so the filter handles both normal notification objects and []
entries without type errors.
Fixes: 77de28cd7c ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
compare_ntfs doesn't fail when expected and received notification
streams diverge.
Fix this bug by tracking the diff exit status explicitly and return it
to the caller so notification mismatches propagate as test failures.
Fixes: 77de28cd7c ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
test-mark.sh installs nftables rules in an inet/filter output chain and
verifies packet drops via nft counters. In vmksft this can fail when the
nftables core is not enabled by the ovpn selftest config.
Add the missing kernel options required by this test:
- CONFIG_NETFILTER
- CONFIG_NF_TABLES
- CONFIG_NF_TABLES_INET
Fixes: 7b80d8a335 ("selftests: ovpn: add test for the FW mark feature")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260319124114.42f91f72@kernel.org/
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Add test cases that exercise the scenario where an IPv6 nexthop is
replaced with an IPv4 nexthop while being part of a group. The group's
has_v4 flag must be updated so that subsequent IPv6 route additions are
properly rejected.
Two cases are covered:
1. Gateway nexthop replaced across families with an existing IPv6
route on the group (rejected by fib6_check_nh_list).
2. Blackhole nexthop replaced across families with no existing IPv6
route on the group (fib6_check_nh_list returns early) — this is
the path that triggers a NULL ptr deref without the kernel fix.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260413114522.147784-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add further netkit queue-lease coverage for netns lifecycle of the guest
and physical halves, channel resize across active leases, single-device
and multi-lessee scenarios, L3 mode operation, lease capacity exhaustion,
and corner-cases of e.g. queue-create rejection paths. Also make the tests
more robust by removing the time.sleep(0.1) after netns deletion and turn
them into a wait loop.
Full test run:
# ./nk_qlease.py
TAP version 13
1..45
ok 1 nk_qlease.test_remove_phys
ok 2 nk_qlease.test_double_lease
ok 3 nk_qlease.test_virtual_lessor
ok 4 nk_qlease.test_phys_lessee
ok 5 nk_qlease.test_different_lessors
ok 6 nk_qlease.test_queue_out_of_range
ok 7 nk_qlease.test_resize_leased
ok 8 nk_qlease.test_self_lease
ok 9 nk_qlease.test_create_tx_type
ok 10 nk_qlease.test_create_primary
ok 11 nk_qlease.test_create_limit
ok 12 nk_qlease.test_link_flap_phys
ok 13 nk_qlease.test_queue_get_virtual
ok 14 nk_qlease.test_remove_virt_first
ok 15 nk_qlease.test_multiple_leases
ok 16 nk_qlease.test_lease_queue_tx_type
ok 17 nk_qlease.test_invalid_netns
ok 18 nk_qlease.test_invalid_phys_ifindex
ok 19 nk_qlease.test_multi_netkit_remove_phys
ok 20 nk_qlease.test_single_remove_phys
ok 21 nk_qlease.test_link_flap_virt
ok 22 nk_qlease.test_phys_queue_no_lease
ok 23 nk_qlease.test_same_ns_lease
ok 24 nk_qlease.test_resize_after_unlease
ok 25 nk_qlease.test_lease_queue_zero
ok 26 nk_qlease.test_release_and_reuse
ok 27 nk_qlease.test_veth_queue_create
ok 28 nk_qlease.test_two_netkits_same_queue
ok 29 nk_qlease.test_l3_mode_lease
ok 30 nk_qlease.test_single_double_lease
ok 31 nk_qlease.test_single_different_lessors
ok 32 nk_qlease.test_cross_ns_netns_id
ok 33 nk_qlease.test_delete_guest_netns
ok 34 nk_qlease.test_move_guest_netns
ok 35 nk_qlease.test_resize_phys_no_reduction
ok 36 nk_qlease.test_delete_one_netkit_of_two
ok 37 nk_qlease.test_bind_rx_leased_phys_queue
ok 38 nk_qlease.test_resize_phys_shrink_past_leased
ok 39 nk_qlease.test_resize_virt_not_supported
ok 40 nk_qlease.test_lease_devices_down
ok 41 nk_qlease.test_lease_capacity_exhaustion
ok 42 nk_qlease.test_resize_phys_up
ok 43 nk_qlease.test_multi_ns_lease
ok 44 nk_qlease.test_multi_ns_delete_one
ok 45 nk_qlease.test_move_phys_netns
# Totals: pass:45 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260413220809.604592-4-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are no tests that verify enablement and disablement of team driver
ports with teamd. This should work even with changes to the enablement
option, so it is important to test.
This test sets up an active-backup network configuration across two
network namespaces, and tries to send traffic while changing which
link is the active one.
Also increase the team test timeout to 300 seconds, because gracefully
killing teamd can take 30 seconds for each instance.
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-5-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are currently no kernel tests that verify the effect of setting
the enabled team driver option. In a followup patch, there will be
changes to this option, so it will be important to make sure it still
behaves as it does now.
The test verifies that tcp continues to work across two different team
devices in separate network namespaces, even when member links are
manually disabled.
Signed-off-by: Marc Harvey <marcharvey@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-4-f47e7589685d@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When developing new test cases and reproducing failures in
existing ones we currently have to run the entire test which
can take minutes to finish.
Add command line options for test selection, modeled after
kselftest_harness.h:
-l list tests (filtered, if filters were specified)
-t name include test
-T name exclude test
Since we don't have as clean separation into fixture / variant /
test as kselftest_harness this is not really a 1 to 1 match.
We have to lean on glob patterns instead.
Like in kselftest_harness filters are evaluated in order, first
match wins. If only exclusions are specified everything else is
included and vice versa.
Glob patterns (*, ?, [) are supported in addition to exact
matching.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Tested-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260410013921.1710295-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for the IFLA_BR_STP_MODE bridge attribute that verifies:
1. stp_mode defaults to auto on new bridges
2. stp_mode can be toggled between user, kernel, and auto
3. Changing stp_mode while STP is active is rejected with -EBUSY
4. Re-setting the same stp_mode while STP is active succeeds
5. stp_mode user in a network namespace yields userspace STP (stp_state=2)
6. stp_mode kernel forces kernel STP (stp_state=1)
7. stp_mode auto in a netns preserves traditional fallback to kernel STP
8. stp_mode and stp_state can be set atomically in a single message
9. stp_mode persists across STP disable/enable cycles
Test 5 is the key use case: it demonstrates that userspace STP can now
be enabled in non-init network namespaces by setting stp_mode to user
before enabling STP.
Test 8 verifies the atomic usage pattern where both attributes are set
in a single netlink message, which is supported because br_changelink()
processes IFLA_BR_STP_MODE before IFLA_BR_STP_STATE.
The test gracefully skips if the installed iproute2 does not support
the stp_mode attribute.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Link: https://patch.msgid.link/20260405205224.3163000-4-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
People (do people still write code or is it all AI?) seem to not
get that ksft_run() can only be called once. If we call it
multiple times KTAP parsers will likely cut off after the first
batch has finished.
Link: https://patch.msgid.link/20260408221952.819822-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2026-04-08
1) Update outdated comment in xfrm_dst_check().
From kexinsun.
2) Drop support for HMAC-RIPEMD-160 from IPsec.
From Eric Biggers.
* tag 'ipsec-next-2026-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Drop support for HMAC-RIPEMD-160
xfrm: update outdated comment
====================
Link: https://patch.msgid.link/20260408094258.148555-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a new stress test to check for race conditions in the
nfnetlink_queue subsystem, where an entry is freed while another CPU is
concurrently walking the global rhashtable.
To trigger this, `nf_queue.c` is extended with two new flags:
* -O (out-of-order): Buffers packet IDs and flushes them in reverse.
* -b (bogus verdicts): Floods the kernel with non-existent packet IDs.
The bogus verdict loop forces the kernel's lookup function to perform
full rhashtable bucket traversals (-ENOENT). Combined with reverse-order
flushing and heavy parallel UDP/ping flooding across 8 queues, this puts
the nfnetlink_queue code under pressure.
Joint work with Florian Westphal.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Add a selftest that verifies the dst_cache in seg6 lwtunnel is not
shared between the input (forwarding) and output (locally generated)
paths.
The test creates three namespaces (ns_src, ns_router, ns_dst)
connected in a line. An SRv6 encap route on ns_router encapsulates
traffic destined to cafe::1 with SID fc00::100. The SID is
reachable only for forwarded traffic (from ns_src) via an ip rule
matching the ingress interface (iif veth-r0 lookup 100), and
blackholed in the main table.
The test verifies that:
1. A packet generated locally on ns_router does not reach
ns_dst with an empty cache, since the SID is blackholed;
2. A forwarded packet from ns_src populates the input cache
from table 100 and reaches ns_dst;
3. A packet generated locally on ns_router still does not
reach ns_dst after the input cache is populated,
confirming the output path does not reuse the input
cache entry.
Both the forwarded and local packets are pinned to the same CPU
with taskset, since dst_cache is per-cpu.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260404004405.4057-3-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The querier-interval test adds h1 (currently a slave of the VRF created
by simple_if_init) to a temporary bridge br1 acting as an outside IGMP
querier. The kernel VRF driver (drivers/net/vrf.c) calls cycle_netdev()
on every slave add and remove, toggling the interface admin-down then up.
Phylink takes the PHY down during the admin-down half of that cycle.
Since h1 and swp1 are cable-connected, swp1 also loses its link may need
several seconds to re-negotiate.
Use setup_wait_dev $h1 0 which waits for h1 to return to UP state, so the
test can rely on the link being back up at this point.
Fixes: 4d8610ee8b ("selftests: net: bridge: add vlan mcast_querier_interval tests")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/c830f130860fd2efae08bfb9e5b25fd028e58ce5.1775424423.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop support for HMAC-RIPEMD-160 from IPsec to reduce the UAPI surface
and simplify future maintenance. It's almost certainly unused.
RIPEMD-160 received some attention in the early 2000s when SHA-* weren't
quite as well established. But it never received much adoption outside
of certain niches such as Bitcoin.
It's actually unclear that Linux + IPsec + HMAC-RIPEMD-160 has *ever*
been used, even historically. When support for it was added in 2003, it
was done so in a "cleanup" commit without any justification [1]. It
didn't actually work until someone happened to fix it 5 years later [2].
That person didn't use or test it either [3]. Finally, also note that
"hmac(rmd160)" is by far the slowest of the algorithms in aalg_list[].
Of course, today IPsec is usually used with an AEAD, such as AES-GCM.
But even for IPsec users still using a dedicated auth algorithm, they
almost certainly aren't using, and shouldn't use, HMAC-RIPEMD-160.
Thus, let's just drop support for it. Note: no kconfig update is
needed, since CRYPTO_RMD160 wasn't actually being selected anyway.
References:
[1] linux-history commit d462985fc1941a47
("[IPSEC]: Clean up key manager algorithm handling.")
[2] linux commit a13366c632
("xfrm: xfrm_algo: correct usage of RIPEMD-160")
[3] https://lore.kernel.org/all/1212340578-15574-1-git-send-email-rueegsegger@swiss-it.ch
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
