Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, one legacy driver removed, a kunit test-suite
for the GPIO core, support for new models in existing drivers and a
slew of various changes in many places though I can't think of
anything controversial that would stand out - it's been a relatively
calm cycle.
GPIO core:
- Add an initial set of kunit test cases for the GPIO subsystem
- Use the devres owner as the GPIO chip's parent in absence of any
other parent
- Fix const-correctness of GPIO chip SRCU guards
- Provide new GPIO consumer interfaces: gpiod_is_single_ended() and
fwnode_gpiod_get()
- Quarantine all legacy GPIO APIs in linux/gpio/legacy.h
- Use __ro_after_init where applicable
New drivers:
- Add driver for the GPIO controller on Waveshare DSI TOUCH panels
Removed drivers:
- Remove the obsolete ts5500 GPIO driver
Driver updates:
- Modernize gpio-timberdale: remove platform data support and use
generic device property accessors
- Extend test build coverage by enabling COMPILE_TEST for more GPIO
drivers
- Add some missing dependencies in Kconfig
- Add support for sparse fixed direction to gpio-regmap
- Remove dead code from gpio-nomadik
- use BIT() in gpio-mxc
- use bitmap_complement() in gpio-xilinx and gpio-pca953x
- Use more appropriate printing functions where applicable
- Use named initializers for platform_device_id and i2c_device_id
arrays
- Convert gpio-altera to using the generic GPIO chip helper library
- Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and
gpio-tegra186
- Unify the naming convention for Qualcomm in GPIO drivers
- Fix interrupt bank mapping to GPIO chips in gpio-mt7621
- Add support for the lines-initial-states property to gpio-74x164
- Switch to using dynamic GPIO base in gpio-ixp4xx
- Move the handling of an OF quirk from ASoC to gpiolib-of.c where
other such quirks live
- Use handle_bad_irq() in gpio-ep93xx
- Some other minor tweaks and refactorings
Devicetree bindings:
- Document the Waveshare GPIO controller for DSI TOUCH panels
- Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in
gpio-zynq
- Add new properties for gpio-dwapb and fairchild,74hc595
- Fix whitespace issues
- Sort compatibles alphabetically in gpio-zynq
Documentation:
- Fix kerneldoc warnings in gpio-realtek-otto
Misc:
- Attach software nodes representing GPIO chips to the actual struct
device objects associated with them in some legacy platforms
enabling real firmware node lookup instead of string matching
- Drop unneeded dependencies on OF_GPIO from bus and staging drivers"
* tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (62 commits)
gpio: nomadik: remove dead DB8540 code from <gpio/gpio-nomadik.h>
gpio: mt7621: fix interrupt banks mapping on gpio chips
bus: ts-nbus: drop unneeded dependency on OF_GPIO
staging: media: max96712: drop unneeded dependency on OF_GPIO
gpiolib: Replace strcpy() with memcpy()
gpio: remove obsolete UAF FIXMEs from lookup paths
gpio: core: fix const-correctness of gpio_chip_guard
gpio: mxc: use BIT() macro
gpio: realtek-otto: fix kernel-doc warnings
gpio: max77620: Unify usage of space and comma in platform_device_id array
gpio: Use named initializers for platform_device_id arrays
gpio: cros-ec: Drop unused assignment of platform_device_id driver data
ARM: omap1: enable real software node lookup of GPIOs on Nokia 770
ARM: omap1: use platform_device_register_full() for GPIO devices on OMAP 16xx
ARM: omap1: drop unused variable from omap16xx_gpio_init()
gpio: gpiolib: use seq_puts() for plain strings
gpio: ts5500: remove obsolete driver
gpio: add kunit test cases for the GPIO subsystem
kunit: provide kunit_platform_device_unregister()
kunit: provide kunit_platform_device_register_full()
...
Pull timekeeping updates from Thomas Gleixner:
"Updates for NTP/timekeeping and PTP:
- Expand timekeeping snapshot mechanisms
The various snapshot functions are mostly used for PTP to collect
"atomic" snapshots of various involved clocks.
They lack support for the recently introduced AUX clocks and do not
provide the underlying counter value (e.g. TSC) to user space.
Exposing the counter value snapshot allows for better control and
steering.
Convert the hard wired ktime_get_snapshot() to take a clock ID,
which allows the caller to select the clock ID to be captured along
with CLOCK_MONONOTONIC_RAW. Additionally capture the underlying
hardware counter value and the clock source ID of the counter.
Expand the hardware based snapshot capture where devices provide a
mechanism to snapshot the hardware PTP clock and the system counter
(usually via PCI/PTM) to support AUX clocks and also provide the
captured counter value back to the caller and not only the clock
timestamps derived from it.
- Add a new optional read_snapshot() callback to clocksources
That is required to capture atomic snapshots from clocksources
which are derived from TSC with a scaling mechanism (e.g. Hyper-V,
KVMclock).
The value pair is handed back in the snapshot structure to the
callers, so they can do the necessary correlations in a more
precise way.
This touches usage sites of the affected functions and data structure
all over the tree, but stays fully backwards compatible for the
existing user space exposed interfaces. New PTP IOCTLs will provide
access to the extended functionality in later kernel versions"
* tag 'timers-ptp-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (28 commits)
ptp: vmclock: Use hw_cycles from snapshot for precise TSC pairing
x86/kvmclock: Implement read_snapshot() for kvmclock clocksource
clocksource/hyperv: Implement read_snapshot() for TSC page clocksource
timekeeping: Add clocksource read_snapshot() method and hw_cycles to snapshot
ptp: Switch to ktime_get_snapshot_id() for pre/post timestamps
timekeeping: Add support for AUX clock cross timestamping
timekeeping: Remove system_device_crosststamp::sys_realtime
ALSA: hda/common: Use system_device_crosststamp::sys_systime
wifi: iwlwifi: Use system_device_crosststamp::sys_systime
ptp: Use system_device_crosststamp::sys_systime
timekeeping: Prepare for cross timestamps on arbitrary clock IDs
timekeeping: Remove ktime_get_snapshot()
virtio_rtc: Use provided clock ID for history snapshot
net/mlx5: Use provided clock ID for history snapshot
igc: Use provided clock ID for history snapshot
ice/ptp: Use provided clock ID for history snapshot
wifi: iwlwifi: Adopt PTP cross timestamps to core changes
timekeeping: Add CLOCK ID to system_device_crosststamp
timekeeping: Add system_counterval_t to struct system_device_crosststamp
timekeeping: Add CLOCK_AUX support for ktime_get_snapshot_id()
...
sdca_dev_unregister_functions() iterates over all SDCA function
descriptors and calls sdca_dev_unregister() on each func_dev without
checking for NULL. When a function registration has failed partway
through, or the device cleanup races with probe deferral, func_dev
entries may be NULL, leading to a kernel oops:
BUG: kernel NULL pointer dereference, address: 0000000000000040
RIP: 0010:device_del+0x1e/0x3e0
Call Trace:
sdca_dev_unregister_functions+0x37/0x60 [snd_soc_sdca]
release_nodes+0x35/0xb0
devres_release_all+0x90/0x100
device_unbind_cleanup+0xe/0x80
device_release_driver_internal+0x1c1/0x200
bus_remove_device+0xc6/0x130
device_del+0x161/0x3e0
device_unregister+0x17/0x60
sdw_delete_slave+0xb6/0xd0 [soundwire_bus]
sdw_bus_master_delete+0x1e/0x50 [soundwire_bus]
...
sof_probe_work+0x19/0x30 [snd_sof]
This was observed on a Lenovo ThinkPad X1 Carbon G14 (Panther Lake)
with the SOF audio driver probe failing due to missing Panther Lake
firmware, causing the subsequent cleanup of SoundWire devices to
trigger the crash.
Fix this with three changes:
1) Add a NULL guard in sdca_dev_unregister() so that callers do not
need to pre-validate the pointer (defense in depth).
2) In sdca_dev_unregister_functions(), skip NULL func_dev entries
and clear func_dev to NULL after unregistration, making the
function idempotent and safe against double-invocation.
3) In sdca_dev_register_functions(), roll back all previously
registered functions when a later one fails, so the function
array is never left in a partially-populated state.
Fixes: 4496d1c65b ("ASoC: SDCA: add function devices")
Signed-off-by: Kean Ren <rh_king@163.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260611023757.1553960-1-rh_king@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "invalid position" error occurred when the DMA position descriptor
returned an invalid address value (e.g., pos = -1048838144). This happened
because the `bytes_to_frames()` function returns a signed value, but when
`addr < runtime->dma_addr`, the subtraction produces a negative result that
gets interpreted as a large unsigned integer in comparisons.
when the addr is abnormal, for example,the DMA controller is abnormal in
hardware,x=0 should not be a point(x == runtime->buffer_size),but a range,
which includes the addr address being less than runtime ->dma1-adr, and
the addr exceeding the DMA address range.the value of pos should not better
a negative，return 0, maybe better.
[ 32.834431][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.845019][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.855588][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.866145][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.995394][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 33.006025][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 33.016748][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
Signed-off-by: Li Jun <lijun01@kylinos.cn>
[Remove XRUN reporting I'd mistakenly avised adding on prior review -- broonie]
Link: https://patch.msgid.link/20260611010045.3668574-1-lijun01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware will set dsp_ack to 1 when firmware sends response for the IPC
command issued by host. Similarly dsp_msg flag will be updated to 1.
During ACP D0 entry, the value read from the sof_dsp_ack_write scratch
flag can be uninitialized. A non-zero garbage value is treated as a
pending DSP IPC ack before SOF_FW_BOOT_COMPLETE, causing a spurious
"IPC reply before FW_BOOT_COMPLETE" log.
Fix the condition checks for ipc flags.
Fixes: 738a2b5e2c ("ASoC: SOF: amd: Add IPC support for ACP IP block")
Link: https://github.com/thesofproject/linux/pull/5642
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Tested-by: Umang Jain <uajain@igalia.com>
Link: https://patch.msgid.link/20260609160938.3717513-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In wm_adsp_control_remove() check that the priv pointer is not NULL
before attempting to cleanup what it points to.
When cs_dsp creates a control it calls wm_adsp_control_add_cb() so that
wm_adsp can create its own private control data. There are two cases
where private data is not created:
1. The control is a SYSTEM control, so an ALSA control is not created.
2. The codec driver has registered a control_add() callback that
hides the control, so wm_adsp_control_add() is not called.
When cs_dsp_remove destroys its control list it calls
wm_adsp_control_remove() for each control. But wm_adsp_control_remove()
was attempting to cleanup the private data pointed to by cs_ctl->priv
without checking the pointer for NULL.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 0700bc2fb9 ("ASoC: wm_adsp: Separate generic cs_dsp_coeff_ctl handling")
Link: https://patch.msgid.link/20260604101244.1402862-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At releasing a timer object, e.g. when a userspace timer
(CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it
tries to detach the timer instances and release the resources.
However, it's still possible that other in-flight tasks are holding
the timer instance where the to-be-deleted timer object is associated,
and this may lead to racy accesses.
Fortunately, most of ioctls dealing with the timer instance list
already have the protection with register_mutex, and this also avoids
such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the
concurrent ioctl may lead to use-after-free.
This patch just adds the guard with register_mutex to protect
snd_timer_user_params() for covering the code path as a quick
workaround. It's no hot-path but rather a rarely issued ioctl, so the
performance penalty doesn't matter.
Reported-by: Kyle Zeng <kylebot@openai.com>
Tested-by: Kyle Zeng <kylebot@openai.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260606161145.1933447-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When snd_timer object is freed via snd_timer_free() and still pending
snd_timer_instance objects are assigned to the timer object, it tries
to unlink all instances and just set NULL to each ti->timer, then
releases the resources immediately. The problem is, however, when
there are slave timer instances that are associated with a master
instance linked to this timer: namely, those slave instances still
point to the freed timer object although the master instance is
unlinked, which may lead to user-after-free. The bug can be easily
triggered particularly when a new userspace-driven timers
(CONFIG_SND_UTIMER) is involved, since it can create and delete the
timer object via a simple file open/close, while the other
applications may keep accessing to that timer.
This patch is an attempt to paper over the problem above: now instead
of just unlinking, call snd_timer_close[_locked]() forcibly for each
pending timer instance, so that all assigned slave timer instances are
properly detached, too. Since snd_timer_close() might be called later
by the driver that created that instance, the check of
SNDRV_TIMER_IFLG_DEAD is added at the beginning, too.
Reported-by: Kyle Zeng <kylebot@openai.com>
Tested-by: Kyle Zeng <kylebot@openai.com>
Fixes: 37745918e0 ("ALSA: timer: Introduce virtual userspace-driven timers")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260606161145.1933447-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The dummy sequencer port forwards events by copying an incoming
struct snd_seq_event into a stack temporary, rewriting source and
destination, and dispatching the temporary to subscribers. That legacy
event storage is smaller than struct snd_seq_ump_event.
When a UMP event reaches the dummy client, the copy leaves the UMP flag
set but only provides legacy-sized stack storage. The subscriber
delivery path then uses snd_seq_event_packet_size() and copies a
UMP-sized packet from that stack object, reading past the end of the
temporary.
Use the existing union __snd_seq_event storage and copy the packet size
reported for the incoming event before rewriting the common routing
fields. This preserves the full UMP packet for UMP events while keeping
legacy event handling unchanged.
Fixes: 32cb23a0f9 ("ALSA: seq: dummy: Allow UMP conversion")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Link: https://patch.msgid.link/20260605080204.32045-1-kylebot@openai.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: new full-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=3c20, idProduct=3d21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB62174610061C213260E1A992D2102@TYUPR06MB6217.apcprd06.prod.outlook.com
snd_pcm_drain() uses init_waitqueue_entry which does not clear
entry.prev/next, and add_wait_queue with a conditional
remove_wait_queue that is skipped when to_check is no longer
in the group after concurrent UNLINK. The orphaned wait entry
remains on the unlinked substream sleep queue. On the next
drain iteration, add_wait_queue adds the entry to a new queue
while still linked on the old one, corrupting both lists. A
subsequent wake_up dereferences NULL at the func pointer
(mapped from the spinlock at offset 0 of the misinterpreted
wait_queue_head_t), causing a kernel panic.
Replace init_waitqueue_entry/add_wait_queue/conditional
remove_wait_queue with init_wait_entry/prepare_to_wait/
finish_wait. init_wait_entry clears prev/next via
INIT_LIST_HEAD on each iteration and sets
autoremove_wake_function which auto-removes the entry on
wake-up. finish_wait safely handles both the already-removed
and still-queued cases.
Fixes: 9b1dbd69ba ("ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain")
Signed-off-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Link: https://patch.msgid.link/20260604142559.3840881-1-eilaimemedsnaimel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Fixes for v7.1
There's only one actual fix here, for the TDM configuration on the
Freescale SAI controller, everytihng else is DMI quirks for AMD systems.
One of those is relatively large as it adds a bunch of different structs
but it's all data.
The ASUS Vivobook 18 M1807GA (AMD ACP7.x, PCI 1022:15e2, subsystem
1043:3531) exposes a single Realtek RT721 SDCA codec on SoundWire link 1.
The BIOS reports the ACP audio config flag as 0 (SoundWire mode), so
snd_pci_ps claims the device, brings up the SoundWire managers and
enumerates the RT721 peripheral (sdw:0:1:025d:0721:01); the rt721-sdca
codec driver binds successfully.
No sound card is created, however: acp63_sdw_machine_select() walks
snd_soc_acpi_amd_acp70_sdw_machines[] and finds no entry whose declared
SoundWire peripherals are all present on the bus. The only existing RT721
entry, acp70_rt721_l1u0_tas2783x2_l1u8b, additionally requires two
TAS2783 amplifiers and deliberately exposes the RT721 as jack + DMIC
only. This M1807GA variant has no external amplifiers - the RT721's
internal AIF2 amplifier path drives the speakers - so that entry never
matches and no machine device is registered.
Add a standalone RT721 machine entry for link 1 exposing all three RT721
endpoints (jack/AIF1, speaker amplifier/AIF2, DMIC/AIF3), mirroring the
standalone RT722 configuration. Place it after the TAS2783 combo entry so
platforms that do have the external amplifiers continue to match the more
specific entry first.
ACPI _ADR of the codec: 0x000130025D072101
(link_id=1 version=3 mfg_id=0x025d Realtek part_id=0x0721 class=0x01).
Verified on the hardware: with the entry present the amd_sdw machine
binds, an "amd-soundwire" card is registered exposing the rt721-sdca
AIF1 (SimpleJack) and AIF2 (SmartAmp) PCM devices, and audio plays out
of the built-in speakers.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221282
Signed-off-by: Aleksander Pshenitsyn <brains.fatman@gmail.com>
Link: https://patch.msgid.link/20260531101159.14241-1-brains.fatman@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MSI Raider A18 HX A9WJG has an internal digital microphone
connected through AMD ACP6x, but this machine does not expose the
AcpDmicConnected ACPI property, so acp_yc_mach does not bind.
Add a DMI quirk for this model.
This was tested on an MSI Raider A18 HX A9WJG with board MS-182L,
BIOS E182LAMS.31A, AMD ACP6x rev 0x62, and Realtek ALC274. After
applying the quirk, the internal microphone appears as an acp6x DMIC
capture device and records correctly.
Signed-off-by: David Glushkov <david.glushkov@sntiq.com>
Link: https://patch.msgid.link/20260531214512.170716-1-david.glushkov@sntiq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When configuring 32 slots TDM (channels == slots == 32), the xMR
(Mask Register) write used:
~0UL - ((1 << min(channels, slots)) - 1)
The literal "1" is a signed 32-bit int. Shifting it by 32 positions is
undefined behaviour which may set this register to 0xFFFFFFFF, masking
all 32 slots.
Use GENMASK_U32() macro instead. For 32 slots this produces a zero mask:
~GENMASK_U32(31, 0) = ~0xFFFFFFFF = 0x00000000
Behaviour for fewer than 32 slots is unchanged.
Fixes: 770f58d7d2 ("ASoC: fsl_sai: Support multiple data channel enable bits")
Cc: stable@vger.kernel.org
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20260601083327.1535185-1-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The normal capture for system/device cross timestamps is CLOCK_REALTIME,
but that's meaningless for AUX clocks.
Add a clock_id field to struct system_device_crosststamp and initialize it
with CLOCK_REALTIME at the two places which prepare for cross
timestamps.
After the related code has been cleaned up, the core code will honor the
clock_id field when calculating the system time from the system counter
snapshot.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260529195557.482153523@kernel.org
The MSI Bravo 17 C7VF routes its internal digital microphone through
the ACP6x. The machine driver only enables the DMIC for boards present
in the DMI quirk table, so on this model the internal mic is never
detected and no capture device is created.
Add a quirk entry matching the board's DMI identifiers so the DMIC is
enabled and the internal microphone works.
Signed-off-by: João Miguel <jmiguel.ghp@gmail.com>
Link: https://patch.msgid.link/20260523213548.5219-1-jmiguel.ghp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lenovo Yoga Pro 7 15ASH11 with AMD RYZEN AI MAX+ 388 (Strix Halo, ACP
7.0) uses Realtek ALC287 series codec and no any DMIC connected by ACP.
All DMICs directly connet with ALC codec.
Without this quirk, Input Device of Gnome Sound settings shows Internal
Stereo Microphone and Digital Microphone by default. In fact, Digital
Microphone of ACP doesn't work due to no connecting with ALC287 codec,
the Internal Stereo Microphone as analog device based on snd_hda_intel
driver can work well.
Add a DMI quirk to override the flag to 0, consistent with the existing
entry for the HN7306EA.
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Link: https://patch.msgid.link/20260527102005.58528-1-xy-jackie@139.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes no sense to restore the saved value for a sticky mixer, since
setting any value is a no-op.
However, in some rare cases, SET_CUR is effective despite GET_CUR always
returns a constant value. These mixers are not sticky, but there's no
way to distinguish them. Without any additional information, the best
thing we can do is to set the mixer value to the maximum before bailing
out, so that a soft mixer can still reach the maximum hardware volume if
the mixer turns out to be non-sticky. Meanwhile, all channels must be
synchronized to prevent imbalance volume.
Fixes: 86aa1ea1f1 ("ALSA: usb-audio: Do not expose sticky mixers")
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260531-uac-sticky-error-path-v1-1-12c2329d17ef@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Fixes for v7.1
This round of fixes is mostly Sirini's Qualcomm cleanups that have been
in review for a while, we also have a couple of small fixes from Cássio.
simple_mux_control_put() rejects values greater than e->items, but
enum control values are zero based. For the two-entry mux used by this
driver, valid values are 0 and 1, so value 2 must be rejected as well.
Accepting e->items can store an invalid mux state, pass it to the GPIO
setter, and pass it on to the DAPM mux update path where it is used as
an index into the enum text array.
Use the same >= e->items check used by the ASoC enum helpers.
Fixes: 342fbb7578 ("ASoC: add simple-mux")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260527-asoc-simple-mux-enum-bounds-v1-1-3f805b9fc671@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: new full-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=25aa, idProduct=600b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: TAE1159
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB621736D7C85D43200E54E740D2082@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 21.5" Retina 4K iMac (Late 2015, DMI product name "iMac16,1") ships
with a Cirrus Logic CS4208 codec wired to an external speaker amplifier
enabled through codec GPIO0 -- the same arrangement as the late-2013
MacBookPro 11,x. Without a matching entry in cs4208_mac_fixup_tbl[] the
fixup picker logs:
snd_hda_codec_cs420x hdaudioC1D0: CS4208: picked fixup for codec SSID 106b:0000
i.e. an empty fixup name, GPIO0 stays low, the external amp is never
powered up, and the internal speakers are silent on a stock kernel.
The codec SSID reported by hardware is 0x106b:0x7f00. Reusing CS4208_MBP11
(GPIO0 + SPDIF switch fixup) makes the internal speakers and S/PDIF
output work out of the box, removing the need for users to set
`options snd_hda_intel model=mbp11` via /etc/modprobe.d/.
Tested on iMac16,1 (kernel 6.17.0): four internal drivers
(Left tweeter, Left woofer, Right tweeter, Right woofer, exposed as the
4 channels of the analog-surround-40 ALSA profile) produce audio after
the fixup is applied.
Signed-off-by: Jakub Pisarczyk <pisarz77@gmail.com>
Link: https://patch.msgid.link/20260526201830.34097-1-pisarz77@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> says:
Here is the set of patches, that fixes one of the isssue reported by
Richard Acayan, while doing fix for the reported issue, found various
other issues in the existing code.
This set contains some of those cleanups along with few trivial coding
style patches which looked uncomfortable to read.
Patch 1 should be enough to fix the issue reported.
Tested this is on UNO-Q.
Link: https://patch.msgid.link/20260518092347.3446946-1-srinivas.kandagatla@oss.qualcomm.com
q6asm_dai_close() and q6asm_dai_compr_free() currently issue CMD_CLOSE
whenever prtd->state is non-zero.
After prepare() closes an existing stream, the state is updated to
Q6ASM_STREAM_STOPPED. Since this state is also non-zero, the close and
free paths can send CMD_CLOSE again for a stream that has already been
closed.
Restrict CMD_CLOSE to the Q6ASM_STREAM_RUNNING state so the command is
sent only when the ASM stream is still active.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260518092347.3446946-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The q6asm-dai stream state is used by prepare() to decide whether an
existing stream setup needs to be closed before opening/configuring a new
one. Updating the state from trigger or asynchronous DSP callbacks can make
that state stale or incorrect relative to the actual setup lifetime.
In particular, setting Q6ASM_STREAM_STOPPED on STOP or EOS completion can
make prepare() believe there is no active setup to close, which can result
in opening/configuring the same stream more than once.
Keep stream state updates tied to prepare(), where the stream is actually
closed and reopened, and stop changing it from trigger and EOS callbacks.
Fixes: bfbb12dfa1 ("ASoC: qcom: q6asm-dai: perform correct state check before closing")
Cc: Stable@vger.kernel.org
Closes: https://lore.kernel.org/all/afS7rTHdc9TyIeLx@rdacayan/
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260518092347.3446946-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
byt_cht_es8316_init() enables MCLK before configuring the codec sysclk
and creating the headset jack. If either of those later steps fails, the
function returns without disabling MCLK, leaving the clock enabled after
card registration fails.
Track whether this driver enabled MCLK and disable it on the init error
paths. Add the matching DAI link exit callback so the same clock enable
is also balanced when ASoC cleans up a successfully initialized link.
Fixes: a03bdaa565 ("ASoC: Intel: add machine driver for BYT/CHT + ES8316")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260519-asoc-bytcht-es8316-mclk-leak-v1-1-b4a11cdc2afd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware 2417 for the Scarlett 4th Gen 2i2 moved the direct monitor
gain parameter by 4 bytes, from offset 0x2a0 to 0x2a4, breaking the
"Direct Monitor X Mix Y" controls.
Special-case the offset in the get/set config helpers when the
running firmware is 2417 or later.
Fixes: 4e809a2996 ("ALSA: scarlett2: Add support for Solo, 2i2, and 4i4 Gen 4")
Cc: <stable@vger.kernel.org>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/ahIWTueUlWA5xiV+@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cs35l56_hda_read_acpi() gets an allocated ACPI _SUB string from
acpi_get_subsystem_id(). On success, that string is used to create the
firmware system name.
Several error paths after the _SUB lookup can return without releasing
the allocated string. This includes speaker ID lookup errors other than
-ENOENT, and errors after a firmware system name has been allocated.
Use scoped cleanup for the temporary _SUB string and make
cs35l56->system_name device-managed. This releases the temporary _SUB
string on every error path and lets devres release the firmware system
name on probe failure and device removal.
Fixes: 6f03b446cb ("ALSA: hda: cs35l56: Add support for speaker id")
Fixes: 40b1c2f9b2 ("ALSA: hda/cs35l56: Workaround bad dev-index on Lenovo Yoga Book 9i GenX")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260522-alsa-cs35l56-system-name-leak-v4-1-a6154dd09cd9@gmail.com
The BIOS on the Lenovo Yoga Slim 7 14AGP11 (AMD Ryzen AI / Kraken
Point chassis; board LNVNB161216, product 83QS) programs the PCI
subsystem ID of the HDA function as 17aa:0000. As a result no entry
in alc269_fixup_tbl[] matches via SND_PCI_QUIRK, the fixup falls back
to the generic auto-routing path, and the bass speaker pin is left
mis-routed. Laptop speakers sound noticeably thin.
The codec's own internal subsystem ID register reports 0x17aa394c
correctly, so an HDA_CODEC_QUIRK entry (which matches on the codec
SSID rather than on the PCI SSID) binds the chassis to the existing
ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN fixup. This mirrors the same
workaround already in place for the closely-related Yoga 7 2-in-1
14AKP10 and 16AKP10 entries earlier in the table.
With this change the kernel log goes from
ALC287: picked fixup for PCI SSID 17aa:0000
to
ALC287: picked fixup alc287-yoga9-bass-spk-pin
and speaker routing matches what the firmware intended. Verified by
the reporter against the equivalent modprobe override
(model=,alc287-yoga9-bass-spk-pin).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221438
Signed-off-by: Kris Kater <kris@kater.nu>
Link: https://patch.msgid.link/20260522060902.9423-1-kris@kater.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The comment for the pin configuration 0x21 in the fixup
ALC299_FIXUP_PREDATOR_SPK states "use as headset mic, without its own
jack detect", but the fixup name and the actual usage indicate that the
pin is meant to be used as internal speaker. Correct the comment to
avoid confusion.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260522060742.1384390-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The register DSP event queue is updated under parser->lock, but
snd_motu_register_dsp_message_parser_count_event() reads pull_pos and
push_pos without the lock.
snd_motu_register_dsp_message_parser_copy_event() also reads both queue
positions before taking the lock.
Protect these accesses with parser->lock as well. This keeps the hwdep
poll/read path consistent with the producer side and with the cached
meter/parameter accessors.
Fixes: 634ec0b290 ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260521-alsa-firewire-motu-event-locking-v1-1-708e1c2b5e56@gmail.com
ASoC: Fixes for v7.1
A bigger batch of fixes than usual due to -next not happeing last week,
this is mostly stuff for laptops - a lot of quirks and small fixes,
mainly for x86 and SoundWire. Nothing too big or exciting individually,
just two week's worth.
For PTL onwards Cirrus are intending to rely on function topologies,
rather than using a match table for each system type. Remove this
unnecessary match table entry. Having the match entries can
mean that systems match when they should use function topologies
instead, resulting in incorrect audio configurations. Although,
admittedly this is not too likely with this 6x amp configuration
as those are quite rare, but best to follow best practice.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For PTL onwards Cirrus are intending to rely on function
topologies, rather than using a match table for each system
type. Chrome systems tend to have custom magic in the topology
and thus need to load a specific file. This causes problems as
these system can have the same layout as generic laptops causing
the match to apply to other laptops. Add a DMI quirk that forces
these matches to only apply to specific devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
