mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-07-23 15:37:49 -04:00
f94de432646ebec7857ba2624fe082e779b52572
1180 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
NeilBrown
|
0e0e490f5d |
VFS: use wait_var_event for waiting in d_alloc_parallel()
Parallel lookup starts with a call of d_alloc_parallel(). That primitive
either returns a matching hashed dentry or allocates a new one in the
in-lookup state and returns it to the caller. Once the caller is done
with lookup, it indicates so either by call of d_{splice_alias,add}()
or by call of d_done_lookup(); at that point dentry leaves the in-lookup
state.
If d_alloc_parallel() finds a matching in-lookup dentry, it must wait for
that dentry to leave the in-lookup state, one way or another. Currently
by supplying wait_queue_head to d_alloc_parallel(). If d_alloc_parallel()
creates a new in-lookup dentry, the address of that wait_queue_head is stored
in ->d_wait of new dentry and stays there while it's in the in-lookup;
subsequent d_alloc_parallel() will wait on the queue found in the matching
in-lookup dentry. Transition out of in-lookup state wakes waiters on that
queue (if any).
That works, but the calling conventions are inconvenient - the caller must
supply wait_queue_head and make sure that it survives at least until the new
in-lookup dentry leaves the in-lookup state. That amounts to boilerplate
in the d_alloc_parallel() callers that are followed by a call of d_lookup_done()
in the same function; in cases like nfs asynchronous unlink it gets worse than
that.
This patch changes d_alloc_parallel() to use wake_up_var_locked() to
wake up waiters, and wait_var_event_spinlock() to wait. dentry->d_lock
is used for synchronisation as it is already held and the relevant
times.
That eliminates the need of caller-supplied wait_queue_head, simplifying
the calling conventions. Better yet, we only need one bit of information
stored in dentry itself: whether there are any waiters to be woken up,
and that can be easily stored in ->d_flags; ->d_wait goes away.
The reason we need that bit (DCACHE_LOOKUP_WAITERS) is that with wait_var
machinery the queues are shared with all kinds of stuff and there's
no way tell if any of the waiters have anything to do with our dentry;
most of the time none of them will be relevant, so we need to avoid the
pointless wakeups.
Another benefit of the new scheme comes from the fact that wakeups
have to be done outside of write-side critical areas of ->i_dir_seq;
with the old scheme we need to carry the value picked from ->d_wait from
__d_lookup_unhash() to the place where we actually wake the waiters up.
Now we can just leave DCACHE_LOOKUP_WAITERS in ->d_flags until we get
to doing wakeups - that's done within the same ->d_lock scope, so we
are fine; new bit is accessed only under ->d_lock and it's seen only
on dentries with DCACHE_PAR_LOOKUP in ->d_flags.
__d_lookup_unhash() no longer needs to re-init ->d_lru. That was
previously shared (in a union) with ->d_wait but ->d_wait is now gone
so it no longer corrupts ->d_lru.
Co-developed-by: Al Viro <viro@zeniv.linux.org.uk> # saner handling of flags
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
||
|
David Howells
|
c0410adf3d |
afs: Fix the locking used by afs_get_link()
The afs filesystem in the kernel doesn't do locking correctly for symbolic
links. There are a number of problems:
(1) It doesn't do any locking around afs_read_single() to prevent races
between multiple ->get_link() calls, thereby allowing the possibility
of leaks.
(2) It doesn't use RCU barriering when accessing the buffer pointers
during RCU pathwalk.
(3) It can race with another thread updating the contents of the symlink
if a third party updated it on the server.
Fix this by the following means:
(0) Move symlink handling into its own file as this makes it more
complicated.
(1) Take the validate_lock around afs_read_single() to prevent races
between multiple ->get_link() calls.
(2) Keep a separate copy of the symlink contents with an rcu_head. This
is always going to be a lot smaller than a page, so it can be
kmalloc'd and save quite a bit of memory. It also needs a refcount
for non-RCU pathwalk.
(3) Split the symlink read and write-to-cache routines in afs from those
for directories.
(4) Discard the I/O buffer as soon as the write-to-cache completes as this
is a full page (plus a folio_queue).
(5) If there's no cache, discard the I/O buffer immediately after reading
and copying if there is no cache.
Fixes:
|
||
|
David Howells
|
9871938f99 |
netfs, afs: Fix write skipping in dir/link writepages
Fix netfs_write_single() and afs_single_writepages() to better handle a
write that would be skipped due to lock contention and WB_SYNC_NONE by
returning 1 from netfs_write_single() if it skipped and making
afs_single_writepages() skip also. If a skip occurs, the inode must be
re-marked as the VFS may have cleared the mark.
This is really only theoretical for directories in netfs_write_single() as
the only path to that is through afs_single_writepages() that takes the
->validate_lock around it, thereby serialising it.
Fixes:
|
||
|
David Howells
|
2c8f4742bb |
netfs: Fix potential for tearing in ->remote_i_size and ->zero_point
Fix potential tearing in using ->remote_i_size and ->zero_point by copying i_size_read() and i_size_write() and using the same seqcount as for i_size. We need to make sure that netfslib and the filesystems that use it always hold i_lock whilst updating any of the sizes to prevent i_size_seqcount from getting corrupted. Fixes: |
||
|
Linus Torvalds
|
334fbe734e |
Merge tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton: - "maple_tree: Replace big node with maple copy" (Liam Howlett) Mainly prepararatory work for ongoing development but it does reduce stack usage and is an improvement. - "mm, swap: swap table phase III: remove swap_map" (Kairui Song) Offers memory savings by removing the static swap_map. It also yields some CPU savings and implements several cleanups. - "mm: memfd_luo: preserve file seals" (Pratyush Yadav) File seal preservation to LUO's memfd code - "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan Chen) Additional userspace stats reportng to zswap - "arch, mm: consolidate empty_zero_page" (Mike Rapoport) Some cleanups for our handling of ZERO_PAGE() and zero_pfn - "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu Han) A robustness improvement and some cleanups in the kmemleak code - "Improve khugepaged scan logic" (Vernon Yang) Improve khugepaged scan logic and reduce CPU consumption by prioritizing scanning tasks that access memory frequently - "Make KHO Stateless" (Jason Miu) Simplify Kexec Handover by transitioning KHO from an xarray-based metadata tracking system with serialization to a radix tree data structure that can be passed directly to the next kernel - "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas Ballasi and Steven Rostedt) Enhance vmscan's tracepointing - "mm: arch/shstk: Common shadow stack mapping helper and VM_NOHUGEPAGE" (Catalin Marinas) Cleanup for the shadow stack code: remove per-arch code in favour of a generic implementation - "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin) Fix a WARN() which can be emitted the KHO restores a vmalloc area - "mm: Remove stray references to pagevec" (Tal Zussman) Several cleanups, mainly udpating references to "struct pagevec", which became folio_batch three years ago - "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl Shutsemau) Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail pages encode their relationship to the head page - "mm/damon/core: improve DAMOS quota efficiency for core layer filters" (SeongJae Park) Improve two problematic behaviors of DAMOS that makes it less efficient when core layer filters are used - "mm/damon: strictly respect min_nr_regions" (SeongJae Park) Improve DAMON usability by extending the treatment of the min_nr_regions user-settable parameter - "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka) The proper fix for a previously hotfixed SMP=n issue. Code simplifications and cleanups ensued - "mm: cleanups around unmapping / zapping" (David Hildenbrand) A bunch of cleanups around unmapping and zapping. Mostly simplifications, code movements, documentation and renaming of zapping functions - "support batched checking of the young flag for MGLRU" (Baolin Wang) Batched checking of the young flag for MGLRU. It's part cleanups; one benchmark shows large performance benefits for arm64 - "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner) memcg cleanup and robustness improvements - "Allow order zero pages in page reporting" (Yuvraj Sakshith) Enhance free page reporting - it is presently and undesirably order-0 pages when reporting free memory. - "mm: vma flag tweaks" (Lorenzo Stoakes) Cleanup work following from the recent conversion of the VMA flags to a bitmap - "mm/damon: add optional debugging-purpose sanity checks" (SeongJae Park) Add some more developer-facing debug checks into DAMON core - "mm/damon: test and document power-of-2 min_region_sz requirement" (SeongJae Park) An additional DAMON kunit test and makes some adjustments to the addr_unit parameter handling - "mm/damon/core: make passed_sample_intervals comparisons overflow-safe" (SeongJae Park) Fix a hard-to-hit time overflow issue in DAMON core - "mm/damon: improve/fixup/update ratio calculation, test and documentation" (SeongJae Park) A batch of misc/minor improvements and fixups for DAMON - "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David Hildenbrand) Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code movement was required. - "zram: recompression cleanups and tweaks" (Sergey Senozhatsky) A somewhat random mix of fixups, recompression cleanups and improvements in the zram code - "mm/damon: support multiple goal-based quota tuning algorithms" (SeongJae Park) Extend DAMOS quotas goal auto-tuning to support multiple tuning algorithms that users can select - "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao) Fix the khugpaged sysfs handling so we no longer spam the logs with reams of junk when starting/stopping khugepaged - "mm: improve map count checks" (Lorenzo Stoakes) Provide some cleanups and slight fixes in the mremap, mmap and vma code - "mm/damon: support addr_unit on default monitoring targets for modules" (SeongJae Park) Extend the use of DAMON core's addr_unit tunable - "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache) Cleanups to khugepaged and is a base for Nico's planned khugepaged mTHP support - "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand) Code movement and cleanups in the memhotplug and sparsemem code - "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup CONFIG_MIGRATION" (David Hildenbrand) Rationalize some memhotplug Kconfig support - "change young flag check functions to return bool" (Baolin Wang) Cleanups to change all young flag check functions to return bool - "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh Law and SeongJae Park) Fix a few potential DAMON bugs - "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo Stoakes) Convert a lot of the existing use of the legacy vm_flags_t data type to the new vma_flags_t type which replaces it. Mainly in the vma code. - "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes) Expand the mmap_prepare functionality, which is intended to replace the deprecated f_op->mmap hook which has been the source of bugs and security issues for some time. Cleanups, documentation, extension of mmap_prepare into filesystem drivers - "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes) Simplify and clean up zap_huge_pmd(). Additional cleanups around vm_normal_folio_pmd() and the softleaf functionality are performed. * tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm: fix deferred split queue races during migration mm/khugepaged: fix issue with tracking lock mm/huge_memory: add and use has_deposited_pgtable() mm/huge_memory: add and use normal_or_softleaf_folio_pmd() mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio() mm/huge_memory: separate out the folio part of zap_huge_pmd() mm/huge_memory: use mm instead of tlb->mm mm/huge_memory: remove unnecessary sanity checks mm/huge_memory: deduplicate zap deposited table call mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE() mm/huge_memory: add a common exit path to zap_huge_pmd() mm/huge_memory: handle buggy PMD entry in zap_huge_pmd() mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc mm/huge: avoid big else branch in zap_huge_pmd() mm/huge_memory: simplify vma_is_specal_huge() mm: on remap assert that input range within the proposed VMA mm: add mmap_action_map_kernel_pages[_full]() uio: replace deprecated mmap hook with mmap_prepare in uio_info drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare mm: allow handling of stacked mmap_prepare hooks in more drivers ... |
||
|
Linus Torvalds
|
b7d74ea0fd |
Merge tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs i_ino updates from Christian Brauner: "For historical reasons, the inode->i_ino field is an unsigned long, which means that it's 32 bits on 32 bit architectures. This has caused a number of filesystems to implement hacks to hash a 64-bit identifier into a 32-bit field, and deprives us of a universal identifier field for an inode. This changes the inode->i_ino field from an unsigned long to a u64. This shouldn't make any material difference on 64-bit hosts, but 32-bit hosts will see struct inode grow by at least 4 bytes. This could have effects on slabcache sizes and field alignment. The bulk of the changes are to format strings and tracepoints, since the kernel itself doesn't care that much about the i_ino field. The first patch changes some vfs function arguments, so check that one out carefully. With this change, we may be able to shrink some inode structures. For instance, struct nfs_inode has a fileid field that holds the 64-bit inode number. With this set of changes, that field could be eliminated. I'd rather leave that sort of cleanups for later just to keep this simple" * tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: nilfs2: fix 64-bit division operations in nilfs_bmap_find_target_in_group() EVM: add comment describing why ino field is still unsigned long vfs: remove externs from fs.h on functions modified by i_ino widening treewide: fix missed i_ino format specifier conversions ext4: fix signed format specifier in ext4_load_inode trace event treewide: change inode->i_ino from unsigned long to u64 nilfs2: widen trace event i_ino fields to u64 f2fs: widen trace event i_ino fields to u64 ext4: widen trace event i_ino fields to u64 zonefs: widen trace event i_ino fields to u64 hugetlbfs: widen trace event i_ino fields to u64 ext2: widen trace event i_ino fields to u64 cachefiles: widen trace event i_ino fields to u64 vfs: widen trace event i_ino fields to u64 net: change sock.sk_ino and sock_i_ino() to u64 audit: widen ino fields to u64 vfs: widen inode hash/lookup functions to u64 |
||
|
Lorenzo Stoakes (Oracle)
|
4995c67d4e |
fs: afs: restore mmap_prepare implementation
Commit
|
||
|
Lorenzo Stoakes (Oracle)
|
fbfc6578ea |
fs: afs: revert mmap_prepare() change
Partially reverts commit |
||
|
Tal Zussman
|
ab5193e919 |
fs: remove unncessary pagevec.h includes
Remove unused pagevec.h includes from .c files. These were found with the following command: grep -rl '#include.*pagevec\.h' --include='*.c' | while read f; do grep -qE 'PAGEVEC_SIZE|folio_batch' "$f" || echo "$f" done There are probably more removal candidates in .h files, but those are more complex to analyze. Link: https://lkml.kernel.org/r/20260225-pagevec_cleanup-v2-2-716868cc2d11@columbia.edu Signed-off-by: Tal Zussman <tz2294@columbia.edu> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand (Arm) <david@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Tal Zussman
|
cbf56f9981 |
mm: remove stray references to struct pagevec
Patch series "mm: Remove stray references to pagevec", v2. struct pagevec was removed in commit |
||
|
Miaoqian Lin
|
4245a79003 |
rxrpc, afs: Fix missing error pointer check after rxrpc_kernel_lookup_peer()
rxrpc_kernel_lookup_peer() can also return error pointers in addition to
NULL, so just checking for NULL is not sufficient.
Fix this by:
(1) Changing rxrpc_kernel_lookup_peer() to return -ENOMEM rather than NULL
on allocation failure.
(2) Making the callers in afs use IS_ERR() and PTR_ERR() to pass on the
error code returned.
Fixes:
|
||
|
Jeff Layton
|
0b2600f81c |
treewide: change inode->i_ino from unsigned long to u64
On 32-bit architectures, unsigned long is only 32 bits wide, which causes 64-bit inode numbers to be silently truncated. Several filesystems (NFS, XFS, BTRFS, etc.) can generate inode numbers that exceed 32 bits, and this truncation can lead to inode number collisions and other subtle bugs on 32-bit systems. Change the type of inode->i_ino from unsigned long to u64 to ensure that inode numbers are always represented as 64-bit values regardless of architecture. Update all format specifiers treewide from %lu/%lx to %llu/%llx to match the new type, along with corresponding local variable types. This is the bulk treewide conversion. Earlier patches in this series handled trace events separately to allow trace field reordering for better struct packing on 32-bit. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20260304-iino-u64-v3-12-2257ad83d372@kernel.org Acked-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Kees Cook
|
189f164e57 |
Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
323bbfcf1e |
Convert 'alloc_flex' family to use the new default GFP_KERNEL argument
This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Linus Torvalds
|
8f7aa3d3c7 |
Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
||
|
Linus Torvalds
|
9368f0f941 |
Merge tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode updates from Christian Brauner:
"Features:
- Hide inode->i_state behind accessors. Open-coded accesses prevent
asserting they are done correctly. One obvious aspect is locking,
but significantly more can be checked. For example it can be
detected when the code is clearing flags which are already missing,
or is setting flags when it is illegal (e.g., I_FREEING when
->i_count > 0)
- Provide accessors for ->i_state, converts all filesystems using
coccinelle and manual conversions (btrfs, ceph, smb, f2fs, gfs2,
overlayfs, nilfs2, xfs), and makes plain ->i_state access fail to
compile
- Rework I_NEW handling to operate without fences, simplifying the
code after the accessor infrastructure is in place
Cleanups:
- Move wait_on_inode() from writeback.h to fs.h
- Spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
for clarity
- Cosmetic fixes to LRU handling
- Push list presence check into inode_io_list_del()
- Touch up predicts in __d_lookup_rcu()
- ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
- Assert on ->i_count in iput_final()
- Assert ->i_lock held in __iget()
Fixes:
- Add missing fences to I_NEW handling"
* tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
dcache: touch up predicts in __d_lookup_rcu()
fs: push list presence check into inode_io_list_del()
fs: cosmetic fixes to lru handling
fs: rework I_NEW handling to operate without fences
fs: make plain ->i_state access fail to compile
xfs: use the new ->i_state accessors
nilfs2: use the new ->i_state accessors
overlayfs: use the new ->i_state accessors
gfs2: use the new ->i_state accessors
f2fs: use the new ->i_state accessors
smb: use the new ->i_state accessors
ceph: use the new ->i_state accessors
btrfs: use the new ->i_state accessors
Manual conversion to use ->i_state accessors of all places not covered by coccinelle
Coccinelle-based conversion to use ->i_state accessors
fs: provide accessors for ->i_state
fs: spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
fs: move wait_on_inode() from writeback.h to fs.h
fs: add missing fences to I_NEW handling
ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
...
|
||
|
David Howells
|
19eef1d98e |
afs: Fix uninit var in afs_alloc_anon_key()
Fix an uninitialised variable (key) in afs_alloc_anon_key() by setting it
to cell->anonymous_key. Without this change, the error check may return a
false failure with a bad error number.
Most of the time this is unlikely to happen because the first encounter
with afs_alloc_anon_key() will usually be from (auto)mount, for which all
subsequent operations must wait - apart from other (auto)mounts. Once the
call->anonymous_key is allocated, all further calls to afs_request_key()
will skip the call to afs_alloc_anon_key() for that cell.
Fixes:
|
||
|
David Howells
|
d27c712578 |
afs: Fix delayed allocation of a cell's anonymous key
The allocation of a cell's anonymous key is done in a background thread
along with other cell setup such as doing a DNS upcall. In the reported
bug, this is triggered by afs_parse_source() parsing the device name given
to mount() and calling afs_lookup_cell() with the name of the cell.
The normal key lookup then tries to use the key description on the
anonymous authentication key as the reference for request_key() - but it
may not yet be set and so an oops can happen.
This has been made more likely to happen by the fix for dynamic lookup
failure.
Fix this by firstly allocating a reference name and attaching it to the
afs_cell record when the record is created. It can share the memory
allocation with the cell name (unfortunately it can't just overlap the cell
name by prepending it with "afs@" as the cell name already has a '.'
prepended for other purposes). This reference name is then passed to
request_key().
Secondly, the anon key is now allocated on demand at the point a key is
requested in afs_request_key() if it is not already allocated. A mutex is
used to prevent multiple allocation for a cell.
Thirdly, make afs_request_key_rcu() return NULL if the anonymous key isn't
yet allocated (if we need it) and then the caller can return -ECHILD to
drop out of RCU-mode and afs_request_key() can be called.
Note that the anonymous key is kind of necessary to make the key lookup
cache work as that doesn't currently cache a negative lookup, but it's
probably worth some investigation to see if NULL can be used instead.
Fixes:
|
||
|
Mateusz Guzik
|
a27628f436 |
fs: rework I_NEW handling to operate without fences
In the inode hash code grab the state while ->i_lock is held. If found to be set, synchronize the sleep once more with the lock held. In the real world the flag is not set most of the time. Apart from being simpler to reason about, it comes with a minor speed up as now clearing the flag does not require the smp_mb() fence. While here rename wait_on_inode() to wait_on_new_inode() to line it up with __wait_on_freeing_inode(). Christian Brauner <brauner@kernel.org> says: As per the discussion in [1] I folded in the diff sent in [2]. Link: https://lore.kernel.org/69238e4d.a70a0220.d98e3.006e.GAE@google.com [1] Link: https://lore.kernel.org/c2kpawomkbvtahjm7y5mposbhckb7wxthi3iqy5yr22ggpucrm@ufvxwy233qxo [2] Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Link: https://patch.msgid.link/20251010221737.1403539-1-mjguzik@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Jakub Kicinski
|
9e203721ec |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.18-rc7). No conflicts, adjacent changes: tools/testing/selftests/net/af_unix/Makefile |
||
|
Kees Cook
|
0e50474fa5 |
net: Convert proto_ops bind() callbacks to use sockaddr_unsized
Update all struct proto_ops bind() callback function prototypes from "struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the compiler about object sizes. Calls into struct proto handlers gain casts that will be removed in the struct proto conversion patch. No binary changes expected. Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
David Howells
|
330e2c5148 |
afs: Fix dynamic lookup to fail on cell lookup failure
When a process tries to access an entry in /afs, normally what happens is
that an automount dentry is created by ->lookup() and then triggered, which
jumps through the ->d_automount() op. Currently, afs_dynroot_lookup() does
not do cell DNS lookup, leaving that to afs_d_automount() to perform -
however, it is possible to use access() or stat() on the automount point,
which will always return successfully, have briefly created an afs_cell
record if one did not already exist.
This means that something like:
test -d "/afs/.west" && echo Directory exists
will print "Directory exists" even though no such cell is configured. This
breaks the "west" python module available on PIP as it expects this access
to fail.
Now, it could be possible to make afs_dynroot_lookup() perform the DNS[*]
lookup, but that would make "ls --color /afs" do this for each cell in /afs
that is listed but not yet probed. kafs-client, probably wrongly, preloads
the entire cell database and all the known cells are then listed in /afs -
and doing ls /afs would be very, very slow, especially if any cell supplied
addresses but was wholly inaccessible.
[*] When I say "DNS", actually read getaddrinfo(), which could use any one
of a host of mechanisms. Could also use static configuration.
To fix this, make the following changes:
(1) Create an enum to specify the origination point of a call to
afs_lookup_cell() and pass this value into that function in place of
the "excl" parameter (which can be derived from it). There are six
points of origination:
- Cell preload through /proc/net/afs/cells
- Root cell config through /proc/net/afs/rootcell
- Lookup in dynamic root
- Automount trigger
- Direct mount with mount() syscall
- Alias check where YFS tells us the cell name is different
(2) Add an extra state into the afs_cell state machine to indicate a cell
that's been initialised, but not yet looked up. This is separate from
one that can be considered active and has been looked up at least
once.
(3) Make afs_lookup_cell() vary its behaviour more, depending on where it
was called from:
If called from preload or root cell config, DNS lookup will not happen
until we definitely want to use the cell (dynroot mount, automount,
direct mount or alias check). The cell will appear in /afs but stat()
won't trigger DNS lookup.
If the cell already exists, dynroot will not wait for the DNS lookup
to complete. If the cell did not already exist, dynroot will wait.
If called from automount, direct mount or alias check, it will wait
for the DNS lookup to complete.
(4) Make afs_lookup_cell() return an error if lookup failed in one way or
another. We try to return -ENOENT if the DNS says the cell does not
exist and -EDESTADDRREQ if we couldn't access the DNS.
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220685
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/1784747.1761158912@warthog.procyon.org.uk
Fixes:
|
||
|
Mateusz Guzik
|
f5aa78e2be |
Manual conversion to use ->i_state accessors of all places not covered by coccinelle
Nothing to look at apart from iput_final(). Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Mateusz Guzik
|
b4dbfd8653 |
Coccinelle-based conversion to use ->i_state accessors
All places were patched by coccinelle with the default expecting that ->i_lock is held, afterwards entries got fixed up by hand to use unlocked variants as needed. The script: @@ expression inode, flags; @@ - inode->i_state & flags + inode_state_read(inode) & flags @@ expression inode, flags; @@ - inode->i_state &= ~flags + inode_state_clear(inode, flags) @@ expression inode, flag1, flag2; @@ - inode->i_state &= ~flag1 & ~flag2 + inode_state_clear(inode, flag1 | flag2) @@ expression inode, flags; @@ - inode->i_state |= flags + inode_state_set(inode, flags) @@ expression inode, flags; @@ - inode->i_state = flags + inode_state_assign(inode, flags) @@ expression inode, flags; @@ - flags = inode->i_state + flags = inode_state_read(inode) @@ expression inode, flags; @@ - READ_ONCE(inode->i_state) & flags + inode_state_read(inode) & flags Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Linus Torvalds
|
33fc69a05c |
Merge tag 'pull-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull d_name audit update from Al Viro:
"Simplifying ->d_name audits, easy part.
Turn dentry->d_name into an anon union of const struct qsrt (d_name
itself) and a writable alias (__d_name).
With constification of some struct qstr * arguments of functions that
get &dentry->d_name passed to them, that ends up with all
modifications provably done only in fs/dcache.c (and a fairly small
part of it).
Any new places doing modifications will be easy to find - grep for
__d_name will suffice"
* tag 'pull-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make it easier to catch those who try to modify ->d_name
generic_ci_validate_strict_name(): constify name argument
afs_dir_search: constify qstr argument
afs_edit_dir_{add,remove}(): constify qstr argument
exfat_find(): constify qstr argument
security_dentry_init_security(): constify qstr argument
|
||
|
Linus Torvalds
|
51e9889ab1 |
Merge tag 'pull-fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fs_context updates from Al Viro: "Change vfs_parse_fs_string() calling conventions Get rid of the length argument (almost all callers pass strlen() of the string argument there), add vfs_parse_fs_qstr() for the cases that do want separate length" * tag 'pull-fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do_nfs4_mount(): switch to vfs_parse_fs_string() change the calling conventions for vfs_parse_fs_string() |
||
|
Linus Torvalds
|
5484a4ea7a |
Merge tag 'vfs-6.18-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull afs updates from Christian Brauner: "This contains the change to enable afs to support RENAME_NOREPLACE and RENAME_EXCHANGE if the server supports it" * tag 'vfs-6.18-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: afs: Add support for RENAME_NOREPLACE and RENAME_EXCHANGE |
||
|
Linus Torvalds
|
b786405685 |
Merge tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs workqueue updates from Christian Brauner: "This contains various workqueue changes affecting the filesystem layer. Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This replaces the use of system_wq and system_unbound_wq. system_wq is a per-CPU workqueue which isn't very obvious from the name and system_unbound_wq is to be used when locality is not required. So this renames system_wq to system_percpu_wq, and system_unbound_wq to system_dfl_wq. This also adds a new WQ_PERCPU flag to allow the fs subsystem users to explicitly request the use of per-CPU behavior. Both WQ_UNBOUND and WQ_PERCPU flags coexist for one release cycle to allow callers to transition their calls. WQ_UNBOUND will be removed in a next release cycle" * tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: WQ_PERCPU added to alloc_workqueue users fs: replace use of system_wq with system_percpu_wq fs: replace use of system_unbound_wq with system_dfl_wq |
||
|
Linus Torvalds
|
b7ce6fa90f |
Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
|
||
|
David Howells
|
a19239ba14 |
afs: Add support for RENAME_NOREPLACE and RENAME_EXCHANGE
Add support for RENAME_NOREPLACE and RENAME_EXCHANGE, if the server supports them. The default is translated to YFS.Rename_Replace, falling back to YFS.Rename; RENAME_NOREPLACE is translated to YFS.Rename_NoReplace and RENAME_EXCHANGE to YFS.Rename_Exchange, both of which fall back to reporting EINVAL. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/740476.1758718189@warthog.procyon.org.uk cc: Marc Dionne <marc.dionne@auristor.com> cc: Dan Carpenter <dan.carpenter@linaro.org> cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Zhen Ni
|
9158c6bb24 |
afs: Fix potential null pointer dereference in afs_put_server
afs_put_server() accessed server->debug_id before the NULL check, which
could lead to a null pointer dereference. Move the debug_id assignment,
ensuring we never dereference a NULL server pointer.
Fixes:
|
||
|
Marco Crivellari
|
69635d7f4b |
fs: WQ_PERCPU added to alloc_workqueue users
Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This patch adds a new WQ_PERCPU flag to all the fs subsystem users to explicitly request the use of the per-CPU behavior. Both flags coexist for one release cycle to allow callers to transition their calls. Once migration is complete, WQ_UNBOUND can be removed and unbound will become the implicit default. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. All existing users have been updated accordingly. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Link: https://lore.kernel.org/20250916082906.77439-4-marco.crivellari@suse.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Marco Crivellari
|
7a4f92d39f |
fs: replace use of system_unbound_wq with system_dfl_wq
Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. system_unbound_wq should be the default workqueue so as not to enforce locality constraints for random work whenever it's not required. Adding system_dfl_wq to encourage its use when unbound work should be used. The old system_unbound_wq will be kept for a few release cycles. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Link: https://lore.kernel.org/20250916082906.77439-2-marco.crivellari@suse.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Al Viro
|
6acbce445a |
afs_dir_search: constify qstr argument
Reviewed-by: David Howells <dhowells@redhat.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Al Viro
|
3edcd68e35 |
afs_edit_dir_{add,remove}(): constify qstr argument
Nothing outside of fs/dcache.c has any business modifying dentry names; passing &dentry->d_name as an argument should have that argument declared as a const pointer. Reviewed-by: David Howells <dhowells@redhat.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Mateusz Guzik
|
f99b391778 |
fs: rename generic_delete_inode() and generic_drop_inode()
generic_delete_inode() is rather misleading for what the routine is doing. inode_just_drop() should be much clearer. The new naming is inconsistent with generic_drop_inode(), so rename that one as well with inode_ as the suffix. No functional changes. Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Al Viro
|
b28f9eba12 |
change the calling conventions for vfs_parse_fs_string()
Absolute majority of callers are passing the 4th argument equal to strlen() of the 3rd one. Drop the v_size argument, add vfs_parse_fs_qstr() for the cases that want independent length. Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Linus Torvalds
|
7031769e10 |
Merge tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull mmap_prepare updates from Christian Brauner: "Last cycle we introduce f_op->mmap_prepare() in |
||
|
Linus Torvalds
|
11fe69fbd5 |
Merge tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dentry d_flags updates from Al Viro:
"The current exclusion rules for dentry->d_flags stores are rather
unpleasant. The basic rules are simple:
- stores to dentry->d_flags are OK under dentry->d_lock
- stores to dentry->d_flags are OK in the dentry constructor, before
becomes potentially visible to other threads
Unfortunately, there's a couple of exceptions to that, and that's
where the headache comes from.
The main PITA comes from d_set_d_op(); that primitive sets ->d_op of
dentry and adjusts the flags that correspond to presence of individual
methods. It's very easy to misuse; existing uses _are_ safe, but proof
of correctness is brittle.
Use in __d_alloc() is safe (we are within a constructor), but we might
as well precalculate the initial value of 'd_flags' when we set the
default ->d_op for given superblock and set 'd_flags' directly instead
of messing with that helper.
The reasons why other uses are safe are bloody convoluted; I'm not
going to reproduce it here. See [1] for gory details, if you care. The
critical part is using d_set_d_op() only just prior to
d_splice_alias(), which makes a combination of d_splice_alias() with
setting ->d_op, etc a natural replacement primitive.
Better yet, if we go that way, it's easy to take setting ->d_op and
modifying 'd_flags' under ->d_lock, which eliminates the headache as
far as 'd_flags' exclusion rules are concerned. Other exceptions are
minor and easy to deal with.
What this series does:
- d_set_d_op() is no longer available; instead a new primitive
(d_splice_alias_ops()) is provided, equivalent to combination of
d_set_d_op() and d_splice_alias().
- new field of struct super_block - 's_d_flags'. This sets the
default value of 'd_flags' to be used when allocating dentries on
this filesystem.
- new primitive for setting 's_d_op': set_default_d_op(). This
replaces stores to 's_d_op' at mount time.
All in-tree filesystems converted; out-of-tree ones will get caught
by the compiler ('s_d_op' is renamed, so stores to it will be
caught). 's_d_flags' is set by the same primitive to match the
's_d_op'.
- a lot of filesystems had sb->s_d_op->d_delete equal to
always_delete_dentry; that is equivalent to setting
DCACHE_DONTCACHE in 'd_flags', so such filesystems can bloody well
set that bit in 's_d_flags' and drop 'd_delete()' from
dentry_operations.
In quite a few cases that results in empty dentry_operations, which
means that we can get rid of those.
- kill simple_dentry_operations - not needed anymore
- massage d_alloc_parallel() to get rid of the other exception wrt
'd_flags' stores - we can set DCACHE_PAR_LOOKUP as soon as we
allocate the new dentry; no need to delay that until we commit to
using the sucker.
As the result, 'd_flags' stores are all either under ->d_lock or done
before the dentry becomes visible in any shared data structures"
Link: https://lore.kernel.org/all/20250224010624.GT1977892@ZenIV/ [1]
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits)
configfs: use DCACHE_DONTCACHE
debugfs: use DCACHE_DONTCACHE
efivarfs: use DCACHE_DONTCACHE instead of always_delete_dentry()
9p: don't bother with always_delete_dentry
ramfs, hugetlbfs, mqueue: set DCACHE_DONTCACHE
kill simple_dentry_operations
devpts, sunrpc, hostfs: don't bother with ->d_op
shmem: no dentry retention past the refcount reaching zero
d_alloc_parallel(): set DCACHE_PAR_LOOKUP earlier
make d_set_d_op() static
simple_lookup(): just set DCACHE_DONTCACHE
tracefs: Add d_delete to remove negative dentries
set_default_d_op(): calculate the matching value for ->d_flags
correct the set of flags forbidden at d_set_d_op() time
split d_flags calculation out of d_set_d_op()
new helper: set_default_d_op()
fuse: no need for special dentry_operations for root dentry
switch procfs from d_set_d_op() to d_splice_alias_ops()
new helper: d_splice_alias_ops()
procfs: kill ->proc_dops
...
|
||
|
Edward Adam Davis
|
8b3c655fa2 |
afs: Set vllist to NULL if addr parsing fails
syzbot reported a bug in in afs_put_vlserverlist.
kAFS: bad VL server IP address
BUG: unable to handle page fault for address: fffffffffffffffa
...
Oops: Oops: 0002 [#1] SMP KASAN PTI
...
RIP: 0010:refcount_dec_and_test include/linux/refcount.h:450 [inline]
RIP: 0010:afs_put_vlserverlist+0x3a/0x220 fs/afs/vl_list.c:67
...
Call Trace:
<TASK>
afs_alloc_cell fs/afs/cell.c:218 [inline]
afs_lookup_cell+0x12a5/0x1680 fs/afs/cell.c:264
afs_cell_init+0x17a/0x380 fs/afs/cell.c:386
afs_proc_rootcell_write+0x21f/0x290 fs/afs/proc.c:247
proc_simple_write+0x114/0x1b0 fs/proc/generic.c:825
pde_write fs/proc/inode.c:330 [inline]
proc_reg_write+0x23d/0x330 fs/proc/inode.c:342
vfs_write+0x25c/0x1180 fs/read_write.c:682
ksys_write+0x12a/0x240 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Because afs_parse_text_addrs() parses incorrectly, its return value -EINVAL
is assigned to vllist, which results in -EINVAL being used as the vllist
address when afs_put_vlserverlist() is executed.
Set the vllist value to NULL when a parsing error occurs to avoid this
issue.
Fixes:
|
||
|
Leo Stone
|
9aa6418295 |
afs: Fix check for NULL terminator
Add a missing check for reaching the end of the string while attempting
to split a command.
Fixes:
|
||
|
Lorenzo Stoakes
|
9d5403b103 |
fs: convert most other generic_file_*mmap() users to .mmap_prepare()
Update nearly all generic_file_mmap() and generic_file_readonly_mmap() callers to use generic_file_mmap_prepare() and generic_file_readonly_mmap_prepare() respectively. We update blkdev, 9p, afs, erofs, ext2, nfs, ntfs3, smb, ubifs and vboxsf file systems this way. Remaining users we cannot yet update are ecryptfs, fuse and cramfs. The former two are nested file systems that must support any underlying file ssytem, and cramfs inserts a mixed mapping which currently requires a VMA. Once all file systems have been converted to mmap_prepare(), we can then update nested file systems. Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Link: https://lore.kernel.org/08db85970d89b17a995d2cffae96fb4cc462377f.1750099179.git.lorenzo.stoakes@oracle.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Al Viro
|
05fb0e6664 |
new helper: set_default_d_op()
... to be used instead of manually assigning to ->s_d_op. All in-tree filesystem converted (and field itself is renamed, so any out-of-tree ones in need of conversion will be caught by compiler). Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Linus Torvalds
|
0fb34422b5 |
Merge tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner: - The main API document has been extensively updated/rewritten - Fix an oops in write-retry due to mis-resetting the I/O iterator - Fix the recording of transferred bytes for short DIO reads - Fix a request's work item to not require a reference, thereby avoiding the need to get rid of it in BH/IRQ context - Fix waiting and waking to be consistent about the waitqueue used - Remove NETFS_SREQ_SEEK_DATA_READ, NETFS_INVALID_WRITE, NETFS_ICTX_WRITETHROUGH, NETFS_READ_HOLE_CLEAR, NETFS_RREQ_DONT_UNLOCK_FOLIOS, and NETFS_RREQ_BLOCKED - Reorder structs to eliminate holes - Remove netfs_io_request::ractl - Only provide proc_link field if CONFIG_PROC_FS=y - Remove folio_queue::marks3 - Fix undifferentiation of DIO reads from unbuffered reads * tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: netfs: Fix undifferentiation of DIO reads from unbuffered reads netfs: Fix wait/wake to be consistent about the waitqueue used netfs: Fix the request's work item to not require a ref netfs: Fix setting of transferred bytes with short DIO reads netfs: Fix oops in write-retry from mis-resetting the subreq iterator fs/netfs: remove unused flag NETFS_RREQ_BLOCKED fs/netfs: remove unused flag NETFS_RREQ_DONT_UNLOCK_FOLIOS folio_queue: remove unused field `marks3` fs/netfs: declare field `proc_link` only if CONFIG_PROC_FS=y fs/netfs: remove `netfs_io_request.ractl` fs/netfs: reorder struct fields to eliminate holes fs/netfs: remove unused enum choice NETFS_READ_HOLE_CLEAR fs/netfs: remove unused flag NETFS_ICTX_WRITETHROUGH fs/netfs: remove unused source NETFS_INVALID_WRITE fs/netfs: remove unused flag NETFS_SREQ_SEEK_DATA_READ |
||
|
Linus Torvalds
|
0f70f5b08a |
Merge tag 'pull-automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull automount updates from Al Viro: "Automount wart removal A bunch of odd boilerplate gone from instances - the reason for those was the need to protect the yet-to-be-attched mount from mark_mounts_for_expiry() deciding to take it out. But that's easy to detect and take care of in mark_mounts_for_expiry() itself; no need to have every instance simulate mount being busy by grabbing an extra reference to it, with finish_automount() undoing that once it attaches that mount. Should've done it that way from the very beginning... This is a flagday change, thankfully there are very few instances. vfs_submount() is gone - its sole remaining user (trace_automount) had been switched to saner primitives" * tag 'pull-automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill vfs_submount() saner calling conventions for ->d_automount() |
||
|
Linus Torvalds
|
1b98f357da |
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
||
|
Linus Torvalds
|
6d5b940e1e |
Merge tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs directory lookup updates from Christian Brauner: "This contains cleanups for the lookup_one*() family of helpers. We expose a set of functions with names containing "lookup_one_len" and others without the "_len". This difference has nothing to do with "len". It's rater a historical accident that can be confusing. The functions without "_len" take a "mnt_idmap" pointer. This is found in the "vfsmount" and that is an important question when choosing which to use: do you have a vfsmount, or are you "inside" the filesystem. A related question is "is permission checking relevant here?". nfsd and cachefiles *do* have a vfsmount but *don't* use the non-_len functions. They pass nop_mnt_idmap and refuse to work on filesystems which have any other idmap. This work changes nfsd and cachefile to use the lookup_one family of functions and to explictily pass &nop_mnt_idmap which is consistent with all other vfs interfaces used where &nop_mnt_idmap is explicitly passed. The remaining uses of the "_one" functions do not require permission checks so these are renamed to be "_noperm" and the permission checking is removed. This series also changes these lookup function to take a qstr instead of separate name and len. In many cases this simplifies the call" * tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: VFS: change lookup_one_common and lookup_noperm_common to take a qstr Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS VFS: rename lookup_one_len family to lookup_noperm and remove permission check cachefiles: Use lookup_one() rather than lookup_one_len() nfsd: Use lookup_one() rather than lookup_one_len() VFS: improve interface for lookup_one functions |
||
|
David Howells
|
db26d62d79 |
netfs: Fix undifferentiation of DIO reads from unbuffered reads
On cifs, "DIO reads" (specified by O_DIRECT) need to be differentiated from
"unbuffered reads" (specified by cache=none in the mount parameters). The
difference is flagged in the protocol and the server may behave
differently: Windows Server will, for example, mandate that DIO reads are
block aligned.
Fix this by adding a NETFS_UNBUFFERED_READ to differentiate this from
NETFS_DIO_READ, parallelling the write differentiation that already exists.
cifs will then do the right thing.
Fixes:
|