Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Per-controller admin and IO timeout sysfs attributes, and
letting the block layer set request timeouts (Maurizio,
Maximilian)
- Multipath passthrough iostats, and PCI P2PDMA enablement for
multipath devices (Keith, Kiran)
- A new diag sysfs attribute group exporting per-controller
counters (retries, multipath failover, error counters, requeue
and failure counts, reset and reconnect events) (Nilay)
- FDP configuration validation and bounds check fixes (liuxixin)
- Various nvmet fixes, including a pre-auth out-of-bounds read in
the Discovery Get Log Page handler, auth payload bounds
validation, and tcp error-path leak fixes (Bryam, Tianchu,
Geliang)
- nvme-tcp lockdep and workqueue fixes (Shin'ichiro, Kuniyuki,
Eric)
- Assorted other fixes and cleanups (John, Yao, Chao, Mateusz,
Achkinazi, Wentao)
- MD pull request via Yu Kuai:
- raid1/raid10 fixes for a deadlock in the read error recovery
path, error-path detection and bio accounting with cloned bios,
and an nr_pending leak in the REQ_ATOMIC bad-block error path
(Abd-Alrhman)
- PCI P2PDMA propagation from member devices to the RAID device
(Kiran)
- dm-raid bio requeue fix, and various smaller fixes and cleanups
(Benjamin, Chen, Li, Thorsten)
- Enable Clang lock context analysis for the block layer, with the
accompanying annotations across queue limits, the blk_holder_ops
callbacks, crypto, cgroup, iocost, kyber and mq-deadline (Bart)
- Block status code infrastructure work: a tagged status table, a
str_to_blk_op() helper, a bio_endio_status() helper, and on top of
that a new configurable block-layer error injection facility
(Christoph)
- DRBD netlink rework, replacing the genl_magic machinery with explicit
netlink serialization and moving the DRBD UAPI headers to
include/uapi/linux/ (Christoph Böhmwalder)
- bvec improvements: a bvec_folio() helper and making the bvec_iter
helpers proper inline functions (Willy, Christoph)
- ublk cleanups and a canceling-flag fix for the disk-not-allocated
case (Caleb, Ming)
- Partition handling fixes: bound the AIX pp_count scan, fix an of_node
refcount leak, and replace __get_free_page() with kmalloc() (Bryam,
Wentao, Mike)
- Convert numa_node to int in blk_mq_hw_ctx and ->init_request, and add
WQ_PERCPU to the block workqueue users (Mateusz, Marco)
- Block statistics and tracing: propagate in-flight to the whole disk
on partition IO, export passthrough stats, and a new
block_rq_tag_wait tracepoint (Tang, Keith, Aaron)
- A round of removals, unexports and cleanups across bio, direct-io and
the bvec helpers (Christoph)
- Various driver fixes (mtip32xx use-after-free, rbd snap_count
validation and strscpy conversion, nbd socket lockdep reclassify,
virtio-blk zone report clamp, floppy) and a batch of MAINTAINERS
email/list updates (Coly, Li, Yu, Christoph Böhmwalder)
- Other little fixes and cleanups all over
* tag 'for-7.2/block-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (117 commits)
MAINTAINERS: Update Coly Li's email address
block: check bio split for unaligned bvec
nbd: Reclassify sockets to avoid lockdep circular dependency
block: add configurable error injection
block: add a str_to_blk_op helper
block: add a "tag" for block status codes
block: add a macro to initialize the status table
floppy: Drop unused pnp driver data
block: propagate in_flight to whole disk on partition I/O
virtio-blk: clamp zone report to the report buffer capacity
block: optimize I/O merge hot path with unlikely() hints
drivers/block/rbd: Use strscpy() to copy strings into arrays
partitions: aix: bound the pp_count scan to the ppe array
block: Enable lock context analysis
block/mq-deadline: Make the lock context annotations compatible with Clang
block/Kyber: Make the lock context annotations compatible with Clang
block/blk-mq-debugfs: Improve lock context annotations
block/blk-iocost: Inline iocg_lock() and iocg_unlock()
block/blk-iocost: Split ioc_rqos_throttle()
block/crypto: Annotate the crypto functions
...
Pull SCSI fixes from James Bottomley:
"Two core changes, the only one of significance being the change to
kick queues in SDEV_CANCEL which had a small window for stuck
requests.
The major driver fixes are the one to the FC transport class to widen
the FPIN counter to counter a theoretical (and privileged) fabric
traffic injection attack and the other is an iscsi fix where a
malicious target could trick the kernel into an output buffer overrun.
Both the driver fixes were AI assisted"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf
scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd()
scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
scsi: scsi_debug: Add missing newline in scsi_debug_device_reset()
scsi: megaraid_sas: Fix NULL pointer dereference on firmware duplicate completion
scsi: devinfo: Add BLIST_NO_RSOC for Promise VTrak E310f
scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues
drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the
descriptor cursor by an attacker-supplied fip_dlen without ever
requiring dlen >= sizeof(struct fip_desc) in the default branch. The
named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked
their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor
(fip_dtype >= 128, which the standard requires receivers to silently
ignore) skipped that check entirely.
An unauthenticated L2 peer on the FCoE control VLAN could hang
fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely
by emitting one FIP CVL frame whose single descriptor had fip_dtype ==
FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes
per iteration and the loop condition rlen >= sizeof(*desc) stayed true
forever, blocking every subsequent FIP frame on that controller.
Tighten the outer dlen guard to also reject dlen < sizeof(struct
fip_desc), so a malformed descriptor whose length cannot even cover the
descriptor header is rejected before the switch. This is the same
lower-bound the named cases already apply and is the minimum scope that
closes the loop.
Fixes: 97c8389d54 ("[SCSI] fcoe, libfcoe: Add support for FIP. FCoE discovery and keep-alive.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260518144307.2820961-1-michael.bommarito@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS
frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in
the generic FC transport. This is not a local userspace or IP network
path; the attacker must be able to inject fabric traffic, for example as
a compromised switch or fabric controller, or as a same-zone N_Port on a
fabric that permits source spoofing.
The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop
counter against the 32-bit on-wire pname_count field, and did not bound
pname_count by the descriptor body already validated by the TLV walker.
A pname_count of 256 therefore wraps the counter and keeps the loop
condition true indefinitely.
Factor the shared pname_list[] walk into one helper, widen the counter
to u32, and clamp pname_count against the entries that fit in the
descriptor body before iterating.
Fixes: 3dcfe0de5a ("scsi: fc: Parse FPIN packets and update statistics")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260520133015.1018937-1-michael.bommarito@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add NULL check for scmd_local in the MPI2_FUNCTION_SCSI_IO_REQUEST case
to handle firmware duplicate/stale completions.
When firmware sends a duplicate completion for a command that was
already processed and returned to the pool, the driver accesses NULL
scmd pointer causing a crash.
Timeline of the bug:
1. Command completes normally, megasas_return_cmd_fusion() called
2. This sets cmd->scmd = NULL and clears io_request with memset(..., 0,
...)
3. Firmware sends duplicate/stale completion for same SMID (firmware
bug)
4. Driver processes reply descriptor again
5. Cleared io_request has Function = 0 (MPI2_FUNCTION_SCSI_IO_REQUEST)
6. Switch statement matches SCSI_IO_REQUEST case by accident
7. Accesses megasas_priv(NULL scmd)->status -> crash at offset 0x228
The offset 0x228 = sizeof(struct scsi_cmnd) 0x220 + offsetof(status)
0x8.
This issue was observed on PERC H330 Mini running firmware 25.5.9.0001
after 3+ days of heavy I/O load.
Crash signature:
BUG: unable to handle kernel NULL pointer dereference at 0x228
RIP: complete_cmd_fusion+0x428
Function: megasas_priv(cmd_fusion->scmd)->status
Add defensive check to skip processing when scmd_local is NULL. This
handles duplicate completions from firmware and prevents accessing freed
command structures. The check protects all scmd_local uses in both the
SCSI_IO path and the fallthrough LDIO path.
Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com>
Link: https://patch.msgid.link/agWAgtk6rtHqNWb5@machine1
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The extremely slow boots reported July 2014 in bug 79901:
https://bugzilla.kernel.org/show_bug.cgi?id=79901
for Promise VTrak E610f 3U 16-bay FC RAID enclosure occur also with the
Promise VTrak E310f 2U 12-bay FC RAID enclosure. The 2014 patch:
https://bugzilla.kernel.org/attachment.cgi?id=144101&action=diff
added support for the BLIST_NO_RSOC flag and specified that flag for the
Promise VTrak E610f. This current patch simply adds the E310f to that
same list.
One curiosity is the additional BLIST_SPARSELUN flag. This was also in
the 2014 patch for the E610f, and was already in place for *all* Promise
devices since 2007 due to commit e0b2e597d5 ("[SCSI] stex: fix id
mapping issue") which added the line:
{"Promise", "", NULL, BLIST_SPARSELUN}
The 2007 commit message talks of issues with SuperTrak EX (stex) but the
added line did not limit itself to that particular device family. The
current patch for E310F, like the 2014 patch for E610f, adds
BLIST_NO_RSOC while preserving BLIST_SPARSELUN from 2007.
Signed-off-by: Alexander Perlis <aperlis@math.lsu.edu>
Suggested-by: Nikkos Svoboda <nsvoboda@math.lsu.edu>
Link: https://patch.msgid.link/20260512231254.27530-1-aperlis@math.lsu.edu
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not
set the requeue list for a requeued command to be kicked in the future.
The expectation is a call to scsi_run_host_queues() will kick all SCSI
devices once the recovery state is cleared.
However, scsi_run_host_queues() uses shost_for_each_device() which uses
scsi_device_get() and so will ignore devices in a partially removed
state like SDEV_CANCEL. But these devices may also have requeued
requests, leaving their requests stuck from not being kicked and causing
the removal process of the device to hang.
scsi_run_host_queues() needs to run against more devices than the macro
shost_for_each_device() allows. Instead of using the too limiting
scsi_device_get() state checks, only ignore devices in SDEV_DEL state or
when unable to acquire a reference. Attempt to run the queues for all
other devices when scsi_run_host_queues() is called.
Fixes: 8b566edbdb ("scsi: core: Only kick the requeue list if necessary")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260515180941.9698-1-djeffery@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
"Small fixes, two in drivers and the remaining a sign conversion probem
in sd with no user visible consequences (non-zero is error)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: tcm_loop: Fix NULL ptr dereference
scsi: isci: Fix use-after-free in device removal path
scsi: sd: Fix return code handling in sd_spinup_disk()
The ISCI completion tasklet is initialized in isci_host_alloc()
(drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy
interrupt handlers (drivers/scsi/isci/host.c:223,613).
isci_host_deinit() stops the controller and waits for stop completion,
but it never kills completion_tasklet before teardown continues. A
top-of-function tasklet_kill() is not sufficient here: interrupts are
only disabled when isci_host_stop_complete() runs, so until
wait_for_stop() returns the IRQ handlers can still requeue the
tasklet. The tasklet callback also re-enables interrupts after draining
completions, so killing the tasklet before the source is quiesced leaves
the same race open.
Once wait_for_stop() returns, no further IRQ-driven scheduling can
occur. Kill completion_tasklet there so teardown cannot race a queued
tasklet running on a dead ihost. On remove or unload, the stale callback
can otherwise dereference ihost and touch ihost->smu_registers after the
host lifetime ends.
A UML + KASAN analogue reproduced the failure class both with no
tasklet_kill() and with tasklet_kill() placed before source quiesce, and
stayed clean once the kill happened after quiescing the scheduling
source.
This mirrors commit f6ab594672 ("scsi: aic94xx: fix use-after-free in
device removal path"), but ISCI needs the kill after wait_for_stop().
Fixes: 6f231dda68 ("isci: Intel(R) C600 Series Chipset Storage Control Unit Driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260419210420.2134639-1-michael.bommarito@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
"All in drivers.
The largest change is the ufs one which has to introduce a new
function to check the power state before doing the update and the most
widely encountered one is the obvious change to sg to not use
GFP_ATOMIC"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: reject invalid size Extended CDB AHS
scsi: ufs: core: Fix bRefClkFreq write failure in HS-LSS mode
scsi: hisi_sas: Fix sparse warnings in prep_ata_v3_hw()
scsi: pmcraid: Fix typo in comments
scsi: scsi_dh_alua: Increase default ALUA timeout to maximum spec value
scsi: smartpqi: Silence a recursive lock warning
scsi: mpt3sas: Limit NVMe request size to 2 MiB
scsi: sg: Don't use GFP_ATOMIC in sg_start_req()
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
The cdrom core never calls set_disk_ro() for a registered device, so
BLKROGET on a CD-ROM device always returns 0 (writable), even when the
drive has no write capabilities and writes will inevitably fail. This
causes problems for userspace that relies on BLKROGET to determine
whether a block device is read-only. For example, systemd's loop device
setup uses BLKROGET to decide whether to create a loop device with
LO_FLAGS_READ_ONLY. Without the read-only flag, writes pass through the
loop device to the CD-ROM and fail with I/O errors. systemd-fsck
similarly checks BLKROGET to decide whether to run fsck in no-repair
mode (-n).
The write-capability bits in cdi->mask come from two different sources:
CDC_DVD_RAM and CDC_CD_RW are populated by the driver from the MODE
SENSE capabilities page (page 0x2A) before register_cdrom() is called,
while CDC_MRW_W and CDC_RAM require the MMC GET CONFIGURATION command
and were only probed by cdrom_open_write() at device open time. This
meant that any attempt to compute the writable state from the full
mask at probe time was incorrect, because the GET CONFIGURATION bits
were still unset (and cdi->mask is initialized such that capabilities
are assumed present).
Fix this by factoring the GET CONFIGURATION probing out of
cdrom_open_write() into a new exported helper,
cdrom_probe_write_features(), and having sr call it from sr_probe()
right after get_capabilities() has populated the MODE SENSE bits.
register_cdrom() then calls set_disk_ro() based on the full
write-capability mask (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)
so the block layer reflects the drive's actual write support. The
feature queries used (CDF_MRW and CDF_RWRT via GET CONFIGURATION with
RT=00) report drive-level capabilities that are persistent across
media, so a single probe before register_cdrom() is sufficient and the
redundant probe at open time is dropped.
With set_disk_ro() now accurate, the long-vestigial cd->writeable flag
in sr can go: get_capabilities() used to set cd->writeable based on
the same four mask bits, but because CDC_MRW_W and CDC_RAM default to
"capability present" in cdi->mask and aren't touched by MODE SENSE,
the condition that gated cd->writeable was always true, making it
unconditionally 1. Replace the corresponding gate in sr_init_command()
with get_disk_ro(cd->disk), which turns a previously no-op check into
a real one and also catches kernel-internal bio writers that bypass
blkdev_write_iter()'s bdev_read_only() check.
The sd driver (SCSI disks) does not have this problem because it
checks the MODE SENSE Write Protect bit and calls set_disk_ro()
accordingly. The sr driver cannot use the same approach because the
MMC specification does not define the WP bit in the MODE SENSE
device-specific parameter byte for CD-ROM devices.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Daan De Meyer <daan@amutable.com>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://patch.msgid.link/20260427210139.1400-2-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).
The substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
scsi: target: Don't validate ignored fields in PROUT PREEMPT
scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
scsi: mpi3mr: Fix typo
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
scsi: lpfc: Update lpfc version to 15.0.0.0
scsi: lpfc: Add PCI ID support for LPe42100 series adapters
scsi: lpfc: Introduce 128G link speed selection and support
scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
scsi: lpfc: Update construction of SGL when XPSGL is enabled
scsi: lpfc: Remove deprecated PBDE feature
scsi: lpfc: Add REG_VFI mailbox cmd error handling
scsi: lpfc: Log MCQE contents for mbox commands with no context
scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
scsi: ufs: core: Make the header files self-contained
scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
...
The ALUA handler maps a 0 value (no implicit transition timeout provided
by the target) to the ALUA_FAILOVER_TIMEOUT constant, currently 60
seconds. This means the kernel already does not accept an infinite
transition time.
However, 60 seconds is insufficient for some arrays that may take longer
to complete ALUA transitions. Since the highest value allowed by the
SCSI specification for the implicit transition timeout is a single byte
(255 seconds), change the default to 255. This way, when a target does
not provide an explicit transition timeout, we default to the maximum
value the spec allows rather than an arbitrary 60 second limit.
Co-developed-by: Krishna Kant <krishna.kant@purestorage.com>
Signed-off-by: Krishna Kant <krishna.kant@purestorage.com>
Co-developed-by: Riya Savla <rsavla@purestorage.com>
Signed-off-by: Riya Savla <rsavla@purestorage.com>
Signed-off-by: Brian Bunker <brian@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20260416165512.26497-2-brian@purestorage.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On systems with multiple controllers debug kernel shows
WARNING: possible recursive locking detected
during shutdown.
Each controller does have its own ctrl_info (and mutex) and that isn't
correctly recognized by debug kernel. Suppress the warning by releasing
the mutex at the end of pqi_shutdown().
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20260414124118.23661-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
Pull block updates from Jens Axboe:
- Add shared memory zero-copy I/O support for ublk, bypassing per-I/O
copies between kernel and userspace by matching registered buffer
PFNs at I/O time. Includes selftests.
- Refactor bio integrity to support filesystem initiated integrity
operations and arbitrary buffer alignment.
- Clean up bio allocation, splitting bio_alloc_bioset() into clear fast
and slow paths. Add bio_await() and bio_submit_or_kill() helpers,
unify synchronous bi_end_io callbacks.
- Fix zone write plug refcount handling and plug removal races. Add
support for serializing zone writes at QD=1 for rotational zoned
devices, yielding significant throughput improvements.
- Add SED-OPAL ioctls for Single User Mode management and a STACK_RESET
command.
- Add io_uring passthrough (uring_cmd) support to the BSG layer.
- Replace pp_buf in partition scanning with struct seq_buf.
- zloop improvements and cleanups.
- drbd genl cleanup, switching to pre_doit/post_doit.
- NVMe pull request via Keith:
- Fabrics authentication updates
- Enhanced block queue limits support
- Workqueue usage updates
- A new write zeroes device quirk
- Tagset cleanup fix for loop device
- MD pull requests via Yu Kuai:
- Fix raid5 soft lockup in retry_aligned_read()
- Fix raid10 deadlock with check operation and nowait requests
- Fix raid1 overlapping writes on writemostly disks
- Fix sysfs deadlock on array_state=clear
- Proactive RAID-5 parity building with llbitmap, with
write_zeroes_unmap optimization for initial sync
- Fix llbitmap barrier ordering, rdev skipping, and bitmap_ops
version mismatch fallback
- Fix bcache use-after-free and uninitialized closure
- Validate raid5 journal metadata payload size
- Various cleanups
- Various other fixes, improvements, and cleanups
* tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (146 commits)
ublk: fix tautological comparison warning in ublk_ctrl_reg_buf
scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd()
block: refactor blkdev_zone_mgmt_ioctl
MAINTAINERS: update ublk driver maintainer email
Documentation: ublk: address review comments for SHMEM_ZC docs
ublk: allow buffer registration before device is started
ublk: replace xarray with IDA for shmem buffer index allocation
ublk: simplify PFN range loop in __ublk_ctrl_reg_buf
ublk: verify all pages in multi-page bvec fall within registered range
ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support
xfs: use bio_await in xfs_zone_gc_reset_sync
block: add a bio_submit_or_kill helper
block: factor out a bio_await helper
block: unify the synchronous bi_end_io callbacks
xfs: fix number of GC bvecs
selftests/ublk: add read-only buffer registration test
selftests/ublk: add filesystem fio verify test for shmem_zc
selftests/ublk: add hugetlbfs shmem_zc test for loop target
selftests/ublk: add shared memory zero-copy test
selftests/ublk: add UBLK_F_SHMEM_ZC support for loop target
...
The bounds checking in scsi_bsg_uring_cmd() does not work because
cmd->request_len is a u32 and scmd->cmd_len is a u16. We check that
scmd->cmd_len is valid but if the cmd->request_len is more than
USHRT_MAX it would still lead to a buffer overflow when we do the
copy_from_user().
Fixes: 7b6d3255e7 ("scsi: bsg: add io_uring passthrough handler")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://patch.msgid.link/adjNnMYK7A7KMNkA@stanley.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The storvsc driver has become stricter in handling SRB status codes
returned by the Hyper-V host. When using Virtual Fibre Channel (vFC)
passthrough, the host may return SRB_STATUS_DATA_OVERRUN for
PERSISTENT_RESERVE_IN commands if the allocation length in the CDB does
not match the host's expected response size.
Currently, this status is treated as a fatal error, propagating
Host_status=0x07 [DID_ERROR] to the SCSI mid-layer. This causes
userspace storage utilities (such as sg_persist) to fail with transport
errors, even when the host has actually returned the requested
reservation data in the buffer.
Refactor the existing command-specific workarounds into a new helper
function, storvsc_host_mishandles_cmd(), and add PERSISTENT_RESERVE_IN
to the list of commands where SRB status errors should be suppressed for
vFC devices. This ensures that the SCSI mid-layer processes the returned
data buffer instead of terminating the command.
Signed-off-by: Li Tian <litian@redhat.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Link: https://patch.msgid.link/20260406015344.12566-1-litian@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As far as I can tell, CRYPTO_MD5 has been unnecessary here ever since it
was added by commit c899e4ef96 ("[SCSI] open-iscsi/linux-iscsi-5
Initiator: Kconfig update") in 2005.
CRYPTO was needed until commit 92186c1455 ("scsi: iscsi_tcp: Switch to
using the crc32c library"), but is no longer needed.
Remove these unnecessary kconfig selections.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260404203003.33738-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 15.0.0.0
This patch set adds support for the G8 ASIC found on the LPe42100
series adapter models.
Updates are made to irq affinity assignment, mailbox command handling
related to initialization, SGL construction, firmware download
diagnostics, and the removal of an outdated performance feature. We
also add 128G link speed selection and support.
The patches were cut against Martin's 7.1/scsi-queue tree.
Link: https://patch.msgid.link/20260331205928.119833-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The construction of SGLs is updated to safeguard ASIC boundary requirements
when using XPSGL.
The LSP type SGE is used to notify where a continuing SGL resides.
Typically, this means that the LSP is the last SGE in an SGL because the
current SGL has reached its maximum size and the LSP is used to refer to
the next follow up SGL. Due to ASIC boundary requirements, there is a need
to ensure a 4 KB boundary is not crossed. Thus, for a maximum size of 256
byte SGLs or 16 SGEs, this means restricting the LSP to being the 12th SGE
for the very first SGL that is used for pre-registration. If additional
SGEs are needed, the LSP will be the last SGE position within that follow
up SGL as was previously implemented.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If lpfc_issue_reg_vfi() returns an error in lpfc_rcv_plogi(), then
execution of lpfc_rcv_plogi() continues and lpfc_reg_rpi() is called, which
allocates an mbuf. When this REG_RPI mailbox is issued, it inevitably
fails because the VFI is not registered. However, the REG_RPI failure does
not free the mbuf that was allocated in lpfc_reg_rpi() because there is no
check for mbox error status in lpfc_defer_plogi_acc().
Fix by adding a check in lpfc_rcv_plogi() if lpfc_reg_vfi() fails, then
exit early. Also, add mailbox status check in lpfc_defer_plogi_acc to
enter the REG_RPI mbox_cmpl functions and free the allocated mbuf.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update log message to display the entirety of an MCQE for which there is no
submission context. This log message is not expected to occur and hence is
tagged as a LOG_TRACE_EVENT. As such, move the hbalock release to before
this log message so that the trace event process does not hold the hbalock
for too long.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When specifying rq version, it is preferred to refer to SLI4 interface type
instead of the get_sli4_parameters mailbox command response. If SLI4
if_type is 2 or above, then the newer version 1 is used for rq_create
mailbox commands. Otherwise, version 0 is used and is meant for older
adapters.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The purpose of the lpfc_next_online_cpu() call is to save the CPU index for
the next iteration of the for (index = 0; index < vectors; index++) loop.
Because we’ve reached the last iteration of the loop, cpumask_next(cpu,
aff_mask) returns nr_cpu_ids. Thus, if we already know we've reached the
last iteration of the IRQ affinity assignment loop, then we can just break
and exit.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following compiler warnings:
aicasm_gram.y:1107:24: warning: comparison of different enumeration types
('scope_type' and 'enum yytokentype') [-Wenum-compare]
1107 | || last_scope->type == T_ELSE) {
| ~~~~~~~~~~~~~~~~ ^ ~~~~~~
aicasm_scan.l:392:14: warning: using the result of an assignment as a condition
without parentheses [-Wparentheses]
392 | while (c = *yptr++) {
| ~~^~~~~~~~~
aicasm_macro_scan.l:153:1: warning: non-void function does not return a value
[-Wreturn-type]
153 | }
| ^
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260402153341.2909184-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hpsa formats the controller name into h->devname[8] and derives
interrupt names from it in h->intrname[][16]. Once host_no reaches four
digits, "hpsa%d" no longer fits in devname, and the derived IRQ names
can then overrun the interrupt-name buffers as well.
The previous fix switched these builders to bounded formatting, but that
would truncate user-visible controller and IRQ names. Keep the existing
names intact instead by enlarging the fixed buffers to cover the current
formatted strings.
Fixes: 2946e82bdd ("hpsa: use scsi host_no as hpsa controller number")
Fixes: 8b47004a55 ("hpsa: add interrupt number to /proc/interrupts interrupt name")
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260401120552.78541-1-pengpeng@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.
Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().
This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.
Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].
[1] http://www.linux-m68k.org/faq/ram.html
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull SCSI fixes from James Bottomley:
"Driver (and enclosure) only fixes. Most are obvious. The big change is
in the tcm_loop driver to add command draining to error handling (the
lack of which was causing hangs with the potential for double use
crashes)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: file: Use kzalloc_flex for aio_cmd
scsi: scsi_transport_sas: Fix the maximum channel scanning issue
scsi: target: tcm_loop: Drain commands in target_reset handler
scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done()
scsi: ses: Handle positive SCSI error from ses_recv_diag()
Enhance the IOC shutdown process to handle transient failures during
controller cleanup. Add retry logic with configurable maximum retry
count (MPI3MR_MAX_SHUTDOWN_RETRY_COUNT) and proper timeout management
that resets on each retry attempt. This ensures shutdown can recover
from temporary issues without failing completely.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260320090326.47544-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
