Pull timekeeping updates from Thomas Gleixner:
"Updates for NTP/timekeeping and PTP:
- Expand timekeeping snapshot mechanisms
The various snapshot functions are mostly used for PTP to collect
"atomic" snapshots of various involved clocks.
They lack support for the recently introduced AUX clocks and do not
provide the underlying counter value (e.g. TSC) to user space.
Exposing the counter value snapshot allows for better control and
steering.
Convert the hard wired ktime_get_snapshot() to take a clock ID,
which allows the caller to select the clock ID to be captured along
with CLOCK_MONONOTONIC_RAW. Additionally capture the underlying
hardware counter value and the clock source ID of the counter.
Expand the hardware based snapshot capture where devices provide a
mechanism to snapshot the hardware PTP clock and the system counter
(usually via PCI/PTM) to support AUX clocks and also provide the
captured counter value back to the caller and not only the clock
timestamps derived from it.
- Add a new optional read_snapshot() callback to clocksources
That is required to capture atomic snapshots from clocksources
which are derived from TSC with a scaling mechanism (e.g. Hyper-V,
KVMclock).
The value pair is handed back in the snapshot structure to the
callers, so they can do the necessary correlations in a more
precise way.
This touches usage sites of the affected functions and data structure
all over the tree, but stays fully backwards compatible for the
existing user space exposed interfaces. New PTP IOCTLs will provide
access to the extended functionality in later kernel versions"
* tag 'timers-ptp-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (28 commits)
ptp: vmclock: Use hw_cycles from snapshot for precise TSC pairing
x86/kvmclock: Implement read_snapshot() for kvmclock clocksource
clocksource/hyperv: Implement read_snapshot() for TSC page clocksource
timekeeping: Add clocksource read_snapshot() method and hw_cycles to snapshot
ptp: Switch to ktime_get_snapshot_id() for pre/post timestamps
timekeeping: Add support for AUX clock cross timestamping
timekeeping: Remove system_device_crosststamp::sys_realtime
ALSA: hda/common: Use system_device_crosststamp::sys_systime
wifi: iwlwifi: Use system_device_crosststamp::sys_systime
ptp: Use system_device_crosststamp::sys_systime
timekeeping: Prepare for cross timestamps on arbitrary clock IDs
timekeeping: Remove ktime_get_snapshot()
virtio_rtc: Use provided clock ID for history snapshot
net/mlx5: Use provided clock ID for history snapshot
igc: Use provided clock ID for history snapshot
ice/ptp: Use provided clock ID for history snapshot
wifi: iwlwifi: Adopt PTP cross timestamps to core changes
timekeeping: Add CLOCK ID to system_device_crosststamp
timekeeping: Add system_counterval_t to struct system_device_crosststamp
timekeeping: Add CLOCK_AUX support for ktime_get_snapshot_id()
...
iwlwifi only supports CLOCK_REALTIME timestamps and provides an incomplete
result without system counter values etc.
It also zeros struct system_device_crosststamp, which is already zeroed in
the core and initialized with the clock ID.
Remove the zeroing and reject any request for a clock ID other than REALTIME.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260529195557.535447186@kernel.org
Clearly, from a user perspective, it must be valid to configure
WoWLAN (which can include network detection) and then suspend
while not connected to a network, or even without an interface
at all (WoWLAN config is handled on a per-wiphy basis). Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN but no
(BSS) interface exists.
Remove the WARN_ON(), move the print so it doesn't get done in
this case, and keep returning 1 to disconnect everything.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260515151352.0c55d1135409.I54f8be0e2aa28cfb1cb1dcf3b2d2d8fe75b4397b@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
On old devices such as 7265D, rates are still encoded in version 1
format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but
rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.)
While introducing v3 rates, I changed the driver from internally
handling v1 rates and converting to v2, to internally handling v3
and converting to v1 or v2 according to the firmware. I accordingly
changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer
have different values for different APIs. This was correct.
However, I later reverted this part of the change, because it was
reported that I had broken beacon rates, causing a FW assert/crash.
This caused TX_CMD rates to be set incorrectly, potentially causing
a warning when reported back from the device as having been used.
Fix this (hopefully correctly now) by handling beacon rates in the
TX_CMD that's embedded in the beacon template command separately.
Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate
index, not PLCP value, fixing the real TX_CMD.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260515151351.7407e293dff7.I4ea1a17f8fe99c933d3f3e30d077cf4246125c3e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel
BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart
to true. However, iwl_mld_tx_from_txq() does not check this flag before
dequeuing frames from mac80211 and pushing them to the transport layer.
Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame,
which then gets freed immediately. Under high-throughput conditions
(e.g., Tailscale UDP traffic or active SSH sessions), this creates a
tight dequeue-send-fail-free loop that wastes CPU cycles and generates
rapid skb allocation churn, leading to memory pressure from slab
fragmentation.
The RX path already has this guard (iwl_mld_rx_mpdu checks
in_hw_restart at rx.c:1906), and so does the TXQ allocation worker
(iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to
iwl_mld_tx_from_txq() to stop all TX during firmware restart.
Frames left in mac80211's TXQs are naturally drained after restart
completes, when queue reallocation triggers iwl_mld_tx_from_txq()
via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes
wake_tx_queue.
Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on
kernel 6.19.5 where the firmware crashes approximately every 10-15
minutes under Tailscale traffic.
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sheroz Juraev <goodmartiandev@gmail.com>
Link: https://patch.msgid.link/20260315081221.2678478-1-goodmartiandev@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
When the TLC notification disables AMSDU for a TID, the MLD driver sets
max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in
iwl_mld_tx_tso_segment() checks for zero but not for this sentinel,
allowing it to reach the num_subframes calculation:
num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad)
= (1 + 2) / (1534 + 2) = 0
This zero propagates to iwl_tx_tso_segment() which sets:
gso_size = num_subframes * mss = 0
Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny
segments from a single GSO skb. This floods the TX ring with ~1024
micro-frames (the rest are purged), creating a massive burst of TX
completion events that can lead to memory corruption and a subsequent
use-after-free in TCP's retransmit queue (refcount underflow in
tcp_shifted_skb, NULL deref in tcp_rack_detect_loss).
The MVM driver is immune because it checks mvmsta->amsdu_enabled before
reaching the num_subframes calculation. The MLD driver has no equivalent
bitmap check and relies solely on max_tid_amsdu_len, which does not
catch the sentinel value.
Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the
existing check and falling back to non-AMSDU TSO segmentation. Also add
a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth
to catch any future code paths that produce zero through a different
mechanism.
Suggested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Cole Leavitt <cole@unwrap.rs>
Link: https://patch.msgid.link/20260405054145.1064152-3-cole@unwrap.rs
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Rename the driver-local michael_mic() function to libipw_michael_mic()
to prevent a name conflict with the common michael_mic() function.
Note that this code will be superseded later when libipw starts using
the common michael_mic(). This commit just prevents a bisection hazard.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-2-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We hit a problem in the channel switch flow.
We had link 0 using PHY 0, so the TLC object in the firmware is using
PHY 0.
Then we switched channel, so mac80211 / iwlmld:
* deactivated link 0
* removed PHY 0
* added PHY 1
* modified link 0 to use PHY 1
* activated link 0.
The TLC object was not updated and the firmware was unhappy that the TLC
was still trying to use PHY 0.
Fix that by letting the TLC know about the PHY context before the link
activation.
When we are de-activating a link, let the TLC know so that it'll send a
TLC configuration command with an invalid PHY context to remove the
relationship between the TLC object and the PHY that is going to be
removed.
That last part is not implemented yet in the firmware, so leave this as
a TODO for now.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260321192637.317c66b11a31.I591118fa376ed967c0d1a47058c13834bc94605e@changeid
We used to have a fw id assignment in iwl_mld_init_vif since all interface
types that were added to the driver was immediately added to the FW as
well.
Since NAN was introduced, this is no longer the case - the NAN interface
is not added to the fw until a local schedule is configured.
For this vif we don't assign a fw id so it is 0 by default.
But later, when the vif is removed from the driver, we think that it has
a valid fw id (0) and we point fw_id_to_vif[0] to NULL.
fw_id_to_vif[0] might actually point to another vif with a valid fw id
0. In this case, we end up messing fw_id_to_vif.
Fix this by initializing a vif with a special invalid fw id, and by
exiting iwl_mld_rm_vif early for NAN interfaces.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260321192637.f3b5cc59098f.I3d1dbe66bd224cbb786c2b0ab3d1c9f7ec9003e4@changeid
There is a helper, iwl_mld_fw_id_to_link_conf, that converts a fw link
id into the bss_conf structure. Use it in two more places instead of
retrieving the bss_conf directly from the fw-id-to-bss_conf mapping array.
This required changing the loop bound in iwl_mld_process_per_link_stats()
to ucode_capa.num_links, to avoid hitting a IWL_FW_CHECK for link ids
> ucode_capa.num_links and < ARRAY_SIZE(fw_id_to_bss_conf), but this
change makes sense anyway (there is no reason to iterate links that
cannot be valid).
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260321192637.f8da2cd2a873.I7fbd3b4a86a5695206bb5083fdac49de9acc9dca@changeid
Add support for newer firmware API versions that support
multiple BIOS revisions. Use the new TLV provided by
firmware to determine which BIOS revision it supports.
Future patches will use this information to either
drop commands when the BIOS revision is higher than
supported or convert commands based on the command
specific implementation.
Since we are including now nvm-reg.h in img.h, this causes a
re-definition error of IWL_NUM_CHANNELS which is also defined in
eeprom.c, so rename IWL_NUM_CHANNELS to IWL_NUM_CHANNELS_V2
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320100746.76c8a9589ea0.I7f9157115de702e07511f2c3ed5fcb9ae4c667aa@changeid
