Pull misc vfs updates from Christian Brauner:
"Features:
- Reduce pipe->mutex contention by pre-allocating pages outside the
lock in anon_pipe_write().
anon_pipe_write() called alloc_page() once per page while holding
pipe->mutex. The allocation can sleep doing direct reclaim and runs
memcg charging, which extends the critical section and stalls any
concurrent reader on the same mutex. Now up to 8 pages are
pre-allocated before the mutex is taken, leftovers are recycled
into the per-pipe tmp_page[] cache before unlock, and any remainder
is released after unlock, keeping the allocator out of the critical
section on both sides. On a writers x readers sweep with 64KB
writes against a 1 MB pipe throughput improves 6-28% and average
write latency drops 5-22%; under memory pressure - when the cost of
holding the mutex across reclaim is highest - throughput improves
21-48% and latency drops 17-33%. The microbenchmark is added to
selftests.
- uaccess/sockptr: fix the ignored_trailing logic in
copy_struct_to_user() to behave as documented and the usize check
in copy_struct_from_sockptr() for user pointers, and add
copy_struct_{from,to}_bounce_buffer() and copy_struct_to_sockptr()
helpers for upcoming users (IPPROTO_SMBDIRECT, IPPROTO_QUIC).
- bpf: add a sleepable bpf_real_inode() kfunc that resolves the real
inode backing a dentry via d_real_inode(). On overlayfs the inode
attached to the dentry doesn't carry the underlying device
information; this is used by the filesystem restriction BPF program
that was merged into systemd.
- docs: add guidelines for submitting new filesystems, motivated by
the maintenance burden abandoned and untestable filesystems impose
on VFS developers, blocking infrastructure work like folio
conversions and iomap migration.
Fixes:
- libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
and drop the now-redundant assignments in callers. This began as a
one-line dma-buf fix for a path_noexec() warning; a pseudo
filesystem has no reason not to set SB_I_NOEXEC. All init_pseudo()
callers were audited: the only visible effect is on dma-buf where
SB_I_NOEXEC silences the warning.
- Handle set_blocksize() failures in legacy filesystems (bfs, hpfs,
qnx4, jfs, befs, affs, isofs, minix, ntfs3, omfs). Mounting a
device with a sector size > PAGE_SIZE crashed roughly half of them;
the rest had the same missing error handling pattern. Plus a
follow-up releasing the superblock buffer_head when setting the
minix v3 block size fails.
- mount: honour SB_NOUSER in the new mount API.
- fs/fcntl: fix a SOFTIRQ-unsafe lock order in fasync signaling by
switching the process-group paths of send_sigio() and send_sigurg()
from read_lock(&tasklist_lock) to RCU, matching the single-PID
path.
- vfs: add an FS_USERNS_DELEGATABLE flag and set it for NFS, fixing
delegated NFS mounts (fsopen() in a container with the mount
performed by a privileged daemon) that broke when non-init
s_user_ns was tied to FS_USERNS_MOUNT.
- selftests/namespaces: fix a hang in nsid_test where an unreaped
grandchild kept the TAP pipe write-end open, a waitpid(-1) race in
listns_efault_test, and a false FAIL on kernels without listns()
where the tests should SKIP.
- filelock: fix the break_lease() stub signature for
CONFIG_FILE_LOCKING=n.
- init/initramfs_test: wait for the async initramfs unpacking before
running; the test and do_populate_rootfs() share the parser state.
- fs/coredump: reduce redundant log noise in
validate_coredump_safety().
- iomap: pass the correct length to fserror_report_io() in
__iomap_write_begin().
- backing-file: fix the backing_file_open() kerneldoc.
Cleanups:
- initramfs: refactor the cpio hex header parsing to use hex2bin()
instead of the hand-rolled simple_strntoul() which is reverted, and
extend the initramfs KUnit tests to cover header fields with 0x
prefixes.
- Replace __get_free_pages() and friends with kmalloc()/kzalloc()
across quota, proc, ocfs2/dlm, nilfs2, nfs, nfsd, libfs, jfs, jbd2,
isofs, fuse, select, namespace, configfs, binfmt_misc, bfs, and the
do_mounts init code - part of the larger work of replacing page
allocator calls with kmalloc().
- Use clear_and_wake_up_bit() in unlock_buffer() and
journal_end_buffer_io_sync() instead of open-coding the sequence.
- Drop unused VFS exports: unexport drop_super_exclusive(), remove
start_removing_user_path_at(), and fold __start_removing_path()
into start_removing_path().
- fs/read_write: narrow the __kernel_write() export with
EXPORT_SYMBOL_FOR_MODULES().
- vfs: uapi: retire octal and hex constants in favor of (1 << n) for
the O_ flags. Finding a free bit for a new flag across the
architectures was needlessly hard with the mixed bases.
- dcache: add extra sanity checks of dead dentries in dentry_free()
via a new DENTRY_WARN_ONCE() that also prints d_flags.
- iov_iter: use kmemdup_array() in dup_iter() to harden the
allocation against multiplication overflow.
- fs/pipe: write to ->poll_usage only once.
- vfs: remove an always-taken if-branch in find_next_fd().
- dcache: use kmalloc_flex() for struct external_name in __d_alloc().
- namei: use QSTR() instead of QSTR_INIT() in path_pts().
- sync_file_range: delete dead S_ISLNK code.
- Comment fixes: retire a stale comment in fget_task_next() and fix
assorted spelling mistakes"
* tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (73 commits)
backing-file: fix backing_file_open() kerneldoc parameter
iomap: pass the correct len to fserror_report_io in __iomap_write_begin
vfs: add FS_USERNS_DELEGATABLE flag and set it for NFS
filelock: fix break_lease() stub signature for CONFIG_FILE_LOCKING=n
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
bpf: add bpf_real_inode() kfunc
fs/read_write: Do not export __kernel_write() to the entire world
libfs: drop redundant SB_I_NOEXEC/SB_I_NODEV in init_pseudo() callers
libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
mount: honour SB_NOUSER in the new mount API
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
selftests/pipe: add pipe_bench microbenchmark
fs/pipe: pre-allocate pages outside pipe->mutex in anon_pipe_write
fs: retire stale comment in fget_task_next()
fs: fix spelling mistakes in comment
bfs: replace get_zeroed_page() with kzalloc()
binfmt_misc: replace __get_free_page() with kmalloc()
configfs: replace __get_free_pages() with kzalloc()
fs/namespace: use __getname() to allocate mntpath buffer
fs/select: replace __get_free_page() with kmalloc()
...
Pull openat2 updates from Christian Brauner:
"Features:
- Add O_EMPTYPATH to openat(2)/openat2(2). To get an operable file
descriptor from an O_PATH file descriptor it is possible to use
openat(fd, ".", O_DIRECTORY) for directories, but other file types
require going through open("/proc/<pid>/fd/<nr>") and thus depend
on a functioning procfs.
With O_EMPTYPATH an empty path string is accepted and LOOKUP_EMPTY
is set at path resolution time, allowing to reopen the file behind
the file descriptor directly. Selftests are included.
- Add an OPENAT2_REGULAR flag for openat2(2) which refuses to open
anything but regular files with the new EFTYPE error code.
This implements the "ability to only open regular files" feature
requested by userspace via uapi-group.org and protects services
from being redirected to fifos, device nodes, and friends.
All atomic_open implementations were audited for OPENAT2_REGULAR
handling. Explicit checks were added to ceph, gfs2, nfs (v4), and
cifs/smb - these are the filesystems whose atomic_open can
encounter an existing non-regular file and would otherwise call
finish_open() on it or return a misleading error code.
The remaining implementations (9p, fuse, vboxsf, nfs v2/v3) only
call finish_open() on freshly created files and use
finish_no_open() for lookup hits, letting the VFS catch non-regular
files via the do_open() safety net.
Cleanups:
- Migrate the openat2 selftests to the kselftest harness and move
them under selftests/filesystems/. The tests were written in the
early days of selftests' TAP support and the modern kselftest
harness is much easier to follow and maintain. The contents of the
tests are unchanged and the new emptypath tests are ported on top.
- Make the LAST_XXX last-type constants private to fs/namei.c. The
only user outside of fs/namei.c was ksmbd which only needs to know
whether the last component is a regular one, so
vfs_path_parent_lookup() now performs the LAST_NORM check
internally. The ints are replaced with a dedicated enum last_type"
* tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: replace ints with enum last_type for LAST_XXX
vfs: make LAST_XXX private to fs/namei.c
selftests: openat2: port emptypath_test to kselftest harness
kselftest/openat2: test for OPENAT2_REGULAR flag
openat2: new OPENAT2_REGULAR flag support
openat2: introduce EFTYPE error code
selftest: add tests for O_EMPTYPATH
vfs: add O_EMPTYPATH to openat(2)/openat2(2)
selftests: openat2: migrate to kselftest harness
selftests: openat2: switch from custom ARRAY_LEN to ARRAY_SIZE
selftests: openat2: move helpers to header
selftests: move openat2 tests to selftests/filesystems/
A recent build failure[1] exposed the diffculty of working with the
current octal and hex definitions of O_ flags when trying to find a gap
for a new flag. This difficulty is compounded by the fact that O_ flags
may have architectural specific values.
Replace the hex/octal #defines, which are hard to parse when looking for
free bits, with explicit bit shifts like (1 << 11). Also, add comments
that identify which architectures redefine some of the seemingly free
("cursed") bits in uapi/asm-generic/fcntl.h. These should not be used to
define new O_ flags (for now, at least).
The translastion was done with Claude Opus 4.8, and verified with a
(non-AI) gawk script. The accounting of which architectures claim
which bit-gaps in uapi/asm-generic/fcntl.h is also done by hand.
[1]: https://lore.kernel.org/all/agruPPybCx8q2XcJ@sirena.org.uk/
Assisted-by: Claude:Opus 4.8
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260604222405.5382-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The CONFIG_PA11 option can not be used as a reliable check if we build a
32-bit kernel which needs the 32-bit VDSO.
Instead depend on CONFIG_64BIT and CONFIG_COMPAT only.
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly if a device that lacks a release function
is ever freed.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
While at it, drop the redundant additional reference taken at init.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull parisc architecture updates from Helge Deller:
- A fix to make modules on 32-bit parisc architecture work again
- Drop ip_fast_csum() inline assembly to avoid unaligned memory
accesses
- Allow to build kernel without 32-bit VDSO
- Reference leak fix in error path in LED driver
* tag 'parisc-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: led: fix reference leak on failed device registration
module.lds.S: Fix modules on 32-bit parisc architecture
parisc: Allow to build without VDSO32
parisc: Include 32-bit VDSO only when building for 32-bit or compat mode
parisc: Allow to disable COMPAT mode on 64-bit kernel
parisc: Fix default stack size when COMPAT=n
parisc: Fix signal code to depend on CONFIG_COMPAT instead of CONFIG_64BIT
parisc: is_compat_task() shall return false for COMPAT=n
parisc: Avoid compat syscalls when COMPAT=n
parisc: _llseek syscall is only available for 32-bit userspace
parisc: Drop ip_fast_csum() inline assembly implementation
parisc: update outdated comments for renamed ccio_alloc_consistent()
Pull bpf fixes from Alexei Starovoitov:
"Most of the diff stat comes from Xu Kuohai's fix to emit ENDBR/BTI,
since all JITs had to be touched to move constant blinding out and
pass bpf_verifier_env in.
- Fix use-after-free in arena_vm_close on fork (Alexei Starovoitov)
- Dissociate struct_ops program with map if map_update fails (Amery
Hung)
- Fix out-of-range and off-by-one bugs in arm64 JIT (Daniel Borkmann)
- Fix precedence bug in convert_bpf_ld_abs alignment check (Daniel
Borkmann)
- Fix arg tracking for imprecise/multi-offset in BPF_ST/STX insns
(Eduard Zingerman)
- Copy token from main to subprogs to fix missing kallsyms (Eduard
Zingerman)
- Prevent double close and leak of btf objects in libbpf (Jiri Olsa)
- Fix af_unix null-ptr-deref in sockmap (Michal Luczaj)
- Fix NULL deref in map_kptr_match_type for scalar regs (Mykyta
Yatsenko)
- Avoid unnecessary IPIs. Remove redundant bpf_flush_icache() in
arm64 and riscv JITs (Puranjay Mohan)
- Fix out of bounds access. Validate node_id in arena_alloc_pages()
(Puranjay Mohan)
- Reject BPF-to-BPF calls and callbacks in arm32 JIT (Puranjay Mohan)
- Refactor all JITs to pass bpf_verifier_env to emit ENDBR/BTI for
indirect jump targets on x86-64, arm64 JITs (Xu Kuohai)
- Allow UTF-8 literals in bpf_bprintf_prepare() (Yihan Ding)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (32 commits)
bpf, arm32: Reject BPF-to-BPF calls and callbacks in the JIT
bpf: Dissociate struct_ops program with map if map_update fails
bpf: Validate node_id in arena_alloc_pages()
libbpf: Prevent double close and leak of btf objects
selftests/bpf: cover UTF-8 trace_printk output
bpf: allow UTF-8 literals in bpf_bprintf_prepare()
selftests/bpf: Reject scalar store into kptr slot
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
bpf: Fix precedence bug in convert_bpf_ld_abs alignment check
bpf, arm64: Emit BTI for indirect jump target
bpf, x86: Emit ENDBR for indirect jump targets
bpf: Add helper to detect indirect jump targets
bpf: Pass bpf_verifier_env to JIT
bpf: Move constants blinding out of arch-specific JITs
bpf, sockmap: Take state lock for af_unix iter
bpf, sockmap: Fix af_unix null-ptr-deref in proto update
selftests/bpf: Extend bpf_iter_unix to attempt deadlocking
bpf, sockmap: Fix af_unix iter deadlock
bpf, sockmap: Annotate af_unix sock:: Sk_state data-races
selftests/bpf: verify kallsyms entries for token-loaded subprograms
...
On the 32-bit parisc architecture, we always used the
-ffunction-sections compiler option to tell the compiler to put the
functions into seperate text sections. This is necessary, otherwise
"big" kernel modules like ext4 or ipv6 fail to load because some
branches won't be able to reach their stubs.
Commit 1ba9f89794 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related
macros") broke this for parisc because all text sections will get
unconditionally merged now.
Introduce the ARCH_WANTS_MODULES_TEXT_SECTIONS config option which
avoids the text section merge for modules, and fix this issue by
enabling this option by default for 32-bit parisc.
Fixes: 1ba9f89794 ("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related macros")
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@vger.kernel.org # v6.19+
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The CONFIG_STACK_MAX_DEFAULT_SIZE_MB config option does not exist
when CONFIG_COMPAT is disabled. Use default 1 GB stack in this case.
Signed-off-by: Helge Deller <deller@gmx.de>
The signal handler code used CONFIG_64BIT to decide if compat handling
code should be compiled in. Fix it to use CONFIG_COMPAT instead.
This allows to disable CONFIG_COMPAT even when running a 64-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
The assembly code of ip_fast_csum() triggers unaligned access warnings
if the IP header isn't correctly aligned:
Kernel: unaligned access to 0x173d22e76 in inet_gro_receive+0xbc/0x2e8 (iir 0x0e8810b6)
Kernel: unaligned access to 0x173d22e7e in inet_gro_receive+0xc4/0x2e8 (iir 0x0e88109a)
Kernel: unaligned access to 0x173d22e82 in inet_gro_receive+0xc8/0x2e8 (iir 0x0e90109d)
Kernel: unaligned access to 0x173d22e7a in inet_gro_receive+0xd0/0x2e8 (iir 0x0e9810b8)
Kernel: unaligned access to 0x173d22e86 in inet_gro_receive+0xdc/0x2e8 (iir 0x0e8810b8)
We have the option to a) ignore the warnings, b) work around it by
adding more code to check for alignment, or c) to switch to the generic
implementation and rely on the compiler to optimize the code.
Let's go with c), because a) isn't nice, and b) would effectively lead
to an implementation which is basically equal to c).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v7.0+
Pass bpf_verifier_env to bpf_int_jit_compile(). The follow-up patch will
use env->insn_aux_data in the JIT stage to detect indirect jump targets.
Since bpf_prog_select_runtime() can be called by cbpf and lib/test_bpf.c
code without verifier, introduce helper __bpf_prog_select_runtime()
to accept the env parameter.
Remove the call to bpf_prog_select_runtime() in bpf_prog_load(), and
switch to call __bpf_prog_select_runtime() in the verifier, with env
variable passed. The original bpf_prog_select_runtime() is preserved for
cbpf and lib/test_bpf.c, where env is NULL.
Now all constants blinding calls are moved into the verifier, except
the cbpf and lib/test_bpf.c cases. The instructions arrays are adjusted
by bpf_patch_insn_data() function for normal cases, so there is no need
to call adjust_insn_arrays() in bpf_jit_blind_constants(). Remove it.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> # v12
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # v14
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
During the JIT stage, constants blinding rewrites instructions but only
rewrites the private instruction copy of the JITed subprog, leaving the
global env->prog->insnsi and env->insn_aux_data untouched. This causes a
mismatch between subprog instructions and the global state, making it
difficult to use the global data in the JIT.
To avoid this mismatch, and given that all arch-specific JITs already
support constants blinding, move it to the generic verifier code, and
switch to rewrite the global env->prog->insnsi with the global states
adjusted, as other rewrites in the verifier do.
This removes the constants blinding calls in each JIT, which are largely
duplicated code across architectures.
Since constants blinding is only required for JIT, and there are two
JIT entry functions, jit_subprogs() for BPF programs with multiple
subprogs and bpf_prog_select_runtime() for programs with no subprogs,
move the constants blinding invocation into these two functions.
In the verifier path, bpf_patch_insn_data() is used to keep global
verifier auxiliary data in sync with patched instructions. A key
question is whether this global auxiliary data should be restored
on the failure path.
Besides instructions, bpf_patch_insn_data() adjusts:
- prog->aux->poke_tab
- env->insn_array_maps
- env->subprog_info
- env->insn_aux_data
For prog->aux->poke_tab, it is only used by JIT or only meaningful after
JIT succeeds, so it does not need to be restored on the failure path.
For env->insn_array_maps, when JIT fails, programs using insn arrays
are rejected by bpf_insn_array_ready() due to missing JIT addresses.
Hence, env->insn_array_maps is only meaningful for JIT and does not need
to be restored.
For subprog_info, if jit_subprogs fails and CONFIG_BPF_JIT_ALWAYS_ON
is not enabled, kernel falls back to interpreter. In this case,
env->subprog_info is used to determine subprogram stack depth. So it
must be restored on failure.
For env->insn_aux_data, it is freed by clear_insn_aux_data() at the
end of bpf_check(). Before freeing, clear_insn_aux_data() loops over
env->insn_aux_data to release jump targets recorded in it. The loop
uses env->prog->len as the array length, but this length no longer
matches the actual size of the adjusted env->insn_aux_data array after
constants blinding.
To address it, a simple approach is to keep insn_aux_data as adjusted
after failure, since it will be freed shortly, and record its actual size
for the loop in clear_insn_aux_data(). But since clear_insn_aux_data()
uses the same index to loop over both env->prog->insnsi and env->insn_aux_data,
this approach results in incorrect index for the insnsi array. So an
alternative approach is adopted: clone the original env->insn_aux_data
before blinding and restore it after failure, similar to env->prog.
For classic BPF programs, constants blinding works as before since it
is still invoked from bpf_prog_select_runtime().
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> # powerpc jit
Reviewed-by: Pu Lehui <pulehui@huawei.com> # riscv jit
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # loongarch jit
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-2-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
Pull timer core updates from Thomas Gleixner:
- A rework of the hrtimer subsystem to reduce the overhead for
frequently armed timers, especially the hrtick scheduler timer:
- Better timer locality decision
- Simplification of the evaluation of the first expiry time by
keeping track of the neighbor timers in the RB-tree by providing
a RB-tree variant with neighbor links. That avoids walking the
RB-tree on removal to find the next expiry time, but even more
important allows to quickly evaluate whether a timer which is
rearmed changes the position in the RB-tree with the modified
expiry time or not. If not, the dequeue/enqueue sequence which
both can end up in rebalancing can be completely avoided.
- Deferred reprogramming of the underlying clock event device. This
optimizes for the situation where a hrtimer callback sets the
need resched bit. In that case the code attempts to defer the
re-programming of the clock event device up to the point where
the scheduler has picked the next task and has the next hrtick
timer armed. In case that there is no immediate reschedule or
soft interrupts have to be handled before reaching the reschedule
point in the interrupt entry code the clock event is reprogrammed
in one of those code paths to prevent that the timer becomes
stale.
- Support for clocksource coupled clockevents
The TSC deadline timer is coupled to the TSC. The next event is
programmed in TSC time. Currently this is done by converting the
CLOCK_MONOTONIC based expiry value into a relative timeout,
converting it into TSC ticks, reading the TSC adding the delta
ticks and writing the deadline MSR.
As the timekeeping core has the conversion factors for the TSC
already, the whole back and forth conversion can be completely
avoided. The timekeeping core calculates the reverse conversion
factors from nanoseconds to TSC ticks and utilizes the base
timestamps of TSC and CLOCK_MONOTONIC which are updated once per
tick. This allows a direct conversion into the TSC deadline value
without reading the time and as a bonus keeps the deadline
conversion in sync with the TSC conversion factors, which are
updated by adjtimex() on systems with NTP/PTP enabled.
- Allow inlining of the clocksource read and clockevent write
functions when they are tiny enough, e.g. on x86 RDTSC and WRMSR.
With all those enhancements in place a hrtick enabled scheduler
provides the same performance as without hrtick. But also other
hrtimer users obviously benefit from these optimizations.
- Robustness improvements and cleanups of historical sins in the
hrtimer and timekeeping code.
- Rewrite of the clocksource watchdog.
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design,
which was made in the context of systems far smaller than today, is
based on the assumption that the to be monitored clocksource (TSC)
can be trivially compared against a known to be stable clocksource
(HPET/ACPI-PM timer).
Over the years this rather naive approach turned out to have major
flaws. Long delays between the watchdog invocations can cause wrap
arounds of the reference clocksource. The access to the reference
clocksource degrades on large multi-sockets systems dure to
interconnect congestion. This has been addressed with various
heuristics which degraded the accuracy of the watchdog to the point
that it fails to detect actual TSC problems on older hardware which
exposes slow inter CPU drifts due to firmware manipulating the TSC to
hide SMI time.
The rewrite addresses this by:
- Restricting the validation against the reference clocksource to
the boot CPU which is usually closest to the legacy block which
contains the reference clocksource (HPET/ACPI-PM).
- Do a round robin validation betwen the boot CPU and the other
CPUs based only on the TSC with an algorithm similar to the TSC
synchronization code during CPU hotplug.
- Being more leniant versus remote timeouts
- The usual tiny fixes, cleanups and enhancements all over the place
* tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
alarmtimer: Access timerqueue node under lock in suspend
hrtimer: Fix incorrect #endif comment for BITS_PER_LONG check
posix-timers: Fix stale function name in comment
timers: Get this_cpu once while clearing the idle state
clocksource: Rewrite watchdog code completely
clocksource: Don't use non-continuous clocksources as watchdog
x86/tsc: Handle CLOCK_SOURCE_VALID_FOR_HRES correctly
MIPS: Don't select CLOCKSOURCE_WATCHDOG
parisc: Remove unused clocksource flags
hrtimer: Add a helper to retrieve a hrtimer from its timerqueue node
hrtimer: Remove trailing comma after HRTIMER_MAX_CLOCK_BASES
hrtimer: Mark index and clockid of clock base as const
hrtimer: Drop unnecessary pointer indirection in hrtimer_expire_entry event
hrtimer: Drop spurious space in 'enum hrtimer_base_type'
hrtimer: Don't zero-initialize ret in hrtimer_nanosleep()
hrtimer: Remove hrtimer_get_expires_ns()
timekeeping: Mark offsets array as const
timekeeping/auxclock: Consistently use raw timekeeper for tk_setup_internals()
timer_list: Print offset as signed integer
tracing: Use explicit array size instead of sentinel elements in symbol printing
...
Pull Kbuild/Kconfig updates from Nicolas Schier:
"Kbuild:
- reject unexpected values for LLVM=
- uapi: remove usage of toolchain headers
- switch from '-fms-extensions' to '-fms-anonymous-structs' when
available (currently: clang >= 23.0.0)
- reduce the number of compiler-generated suffixes for clang thin-lto
build
- reduce output spam ("GEN Makefile") when building out of tree
- improve portability for testing headers
- also test UAPI headers against C++ compilers
- drop build ID architecture allow-list in vdso_install
- only run checksyscalls when necessary
- update the debug information notes in reproducible-builds.rst
- expand inlining hints with -fdiagnostics-show-inlining-chain
Kconfig:
- forbid multiple entries with the same symbol in a choice
- error out on duplicated kconfig inclusion"
* tag 'kbuild-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (35 commits)
kbuild: expand inlining hints with -fdiagnostics-show-inlining-chain
kconfig: forbid multiple entries with the same symbol in a choice
Documentation: kbuild: Update the debug information notes in reproducible-builds.rst
checksyscalls: move instance functionality into generic code
checksyscalls: only run when necessary
checksyscalls: fail on all intermediate errors
checksyscalls: move path to reference table to a variable
kbuild: vdso_install: drop build ID architecture allow-list
kbuild: vdso_install: gracefully handle images without build ID
kbuild: vdso_install: hide readelf warnings
kbuild: vdso_install: split out the readelf invocation
kbuild: uapi: also test UAPI headers against C++ compilers
kbuild: uapi: provide a C++ compatible dummy definition of NULL
kbuild: uapi: handle UML in architecture-specific exclusion lists
kbuild: uapi: move all include path flags together
kbuild: uapi: move some compiler arguments out of the command definition
check-uapi: use dummy libc includes
check-uapi: honor ${CROSS_COMPILE} setting
check-uapi: link into shared objects
kbuild: reduce output spam when building out of tree
...
Johannes Berg says:
====================
Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
crypto: Remove michael_mic from crypto_shash API
wifi: ipw2x00: Use michael_mic() from cfg80211
wifi: ath12k: Use michael_mic() from cfg80211
wifi: ath11k: Use michael_mic() from cfg80211
wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
wifi: libertas_tf: refactor endpoint lookup
wifi: libertas: refactor endpoint lookup
wifi: at76c50x: refactor endpoint lookup
wifi: ath12k: Enable IPQ5424 WiFi device support
wifi: ath12k: Add CE remap hardware parameters for IPQ5424
wifi: ath12k: add ath12k_hw_regs for IPQ5424
wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
wifi: ath12k: Add ath12k_hw_params for IPQ5424
dt-bindings: net: wireless: add ath12k wifi device IPQ5424
wifi: ath10k: fix station lookup failure during disconnect
wifi: ath12k: Create symlink for each radio in a wiphy
...
====================
Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the "michael_mic" crypto_shash algorithm, since it's no longer
used. Its only users were wireless drivers, which have now been
converted to use the michael_mic() function instead.
It makes sense that no other users ever appeared: Michael MIC is an
insecure algorithm that is specific to WPA TKIP, which itself was an
interim security solution to replace the broken WEP standard.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260408030651.80336-7-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reduce 22 declarations of empty_zero_page to 3 and 23 declarations of
ZERO_PAGE() to 4.
Every architecture defines empty_zero_page that way or another, but for the
most of them it is always a page aligned page in BSS and most definitions
of ZERO_PAGE do virt_to_page(empty_zero_page).
Move Linus vetted x86 definition of empty_zero_page and ZERO_PAGE() to the
core MM and drop these definitions in architectures that do not implement
colored zero page (MIPS and s390).
ZERO_PAGE() remains a macro because turning it to a wrapper for a static
inline causes severe pain in header dependencies.
For the most part the change is mechanical, with these being noteworthy:
* alpha: aliased empty_zero_page with ZERO_PGE that was also used for boot
parameters. Switching to a generic empty_zero_page removes the aliasing
and keeps ZERO_PGE for boot parameters only
* arm64: uses __pa_symbol() in ZERO_PAGE() so that definition of
ZERO_PAGE() is kept intact.
* m68k/parisc/um: allocated empty_zero_page from memblock,
although they do not support zero page coloring and having it in BSS
will work fine.
* sparc64 can have empty_zero_page in BSS rather allocate it, but it
can't use virt_to_page() for BSS. Keep it's definition of ZERO_PAGE()
but instead of allocating it, make mem_map_zero point to
empty_zero_page.
* sh: used empty_zero_page for boot parameters at the very early boot.
Rename the parameters page to boot_params_page and let sh use the generic
empty_zero_page.
* hexagon: had an amusing comment about empty_zero_page
/* A handy thing to have if one has the RAM. Declared in head.S */
that unfortunately had to go :)
Link: https://lkml.kernel.org/r/20260211103141.3215197-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com> [alpha]
Acked-by: Dinh Nguyen <dinguyen@kernel.org> [nios2]
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a bridge window contains big and small resource(s), the small
resource(s) may not amount to the half of the size of the big resource
which would allow calculate_head_align() to shrink the head alignment.
This results in always placing the small resource(s) after the big
resource.
In general, it would be good to be able to place the small resource(s)
before the big resource to achieve better utilization of the address space.
In the cases where the large resource can only fit at the end of the
window, it is even required.
However, carrying the information over from pbus_size_mem() and
calculate_head_align() to __pci_assign_resource() and
pcibios_align_resource() is not easy with the current data structures.
A somewhat hacky way to move the non-aligning tail part to the head is
possible within pcibios_align_resource(). The free space between the start
of the free space span and the aligned start address can be compared with
the non-aligning remainder of the size. If the free space is larger than
the remainder, placing the remainder before the start address is possible.
This relocation should generally work, because PCI resources consist only
power-of-2 atoms.
Various arch requirements may still need to override the relocation, so the
relocation is only applied selectively in such cases.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
The "small" argument to do_sys_ftruncate indicates if > 32-bit size
should be reject, but all the arch-specific compat ftruncate64
implementations get this wrong. Merge do_sys_ftruncate and
ksys_ftruncate, replace the integer as boolean small flag with a
descriptive one about LFS semantics, and use it correctly in the
architecture-specific ftruncate64 implementations.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 3dd681d944 ("arm64: 32-bit (compat) applications support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260323070205.2939118-2-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Resolve conflict between this change in the upstream kernel:
4c652a4772 ("rseq: Mark rseq_arm_slice_extension_timer() __always_inline")
... and this pending change in timers/core:
0e98eb1481 ("entry: Prepare for deferred hrtimer rearming")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The assembly flush instructions were swapped for I- and D-cache flags:
SYSCALL_DEFINE3(cacheflush, ...)
{
if (cache & DCACHE) {
"fic ...\n"
}
if (cache & ICACHE && error == 0) {
"fdc ...\n"
}
Fix it by using fdc for DCACHE, and fic for ICACHE flushing.
Reported-by: Felix Lechner <felix.lechner@lease-up.com>
Fixes: c6d96328fe ("parisc: Add cacheflush() syscall")
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Helge Deller <deller@gmx.de>
Introduce CC_FLAGS_DIALECT to make it easier to update the various
places in the tree that rely on the GNU C standard and Microsoft
extensions flags atomically. All remaining uses of '-std=gnu11' and
'-fms-extensions' are in the tools directory (which has its own build
system) and other standalone Makefiles. This will allow the kernel to
use a narrower option to enable the Microsoft anonymous tagged structure
extension in a simpler manner. Place the CC_FLAGS_DIALECT block after
the configuration include (so that a future change can move the
selection of the flag to Kconfig) but before the
arch/$(SRCARCH)/Makefile include (so that CC_FLAGS_DIALECT is available
for use in those Makefiles).
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Link: https://patch.msgid.link/20260223-fms-anonymous-structs-v1-1-8ee406d3c36c@kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Pull parisc fixes from Helge Deller:
"While testing Sasha Levin's 'kallsyms: embed source file:line info in
kernel stack traces' patch series, which increases the typical kernel
image size, I found some issues with the parisc initial kernel mapping
which may prevent the kernel to boot.
The three small patches here fix this"
* tag 'parisc-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix initial page table creation for boot
parisc: Check kernel mapping earlier at bootup
parisc: Increase initial mapping to 64 MB with KALLSYMS
The KERNEL_INITIAL_ORDER value defines the initial size (usually 32 or
64 MB) of the page table during bootup. Up until now the whole area was
initialized with PTE entries, but there was no check if we filled too
many entries. Change the code to fill up with so many entries that the
"_end" symbol can be reached by the kernel, but not more entries than
actually fit into the initial PTE tables.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
The check if the initial mapping is sufficient needs to happen much
earlier during bootup. Move this test directly to the start_parisc()
function and use native PDC iodc functions to print the warning, because
panic() and printk() are not functional yet.
This fixes boot when enabling various KALLSYSMS options which need
much more space.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
The 32MB initial kernel mapping can become too small when CONFIG_KALLSYMS
is used. Increase the mapping to 64 MB in this case.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3e ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f210913 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
