The KSZ9477 errata points out (in 'Module 4') the link up/down problems
when EEE (Energy Efficient Ethernet) is enabled in the device to which
the KSZ9477 tries to auto negotiate.
The suggested workaround is to clear advertisement of EEE for PHYs in
this chip driver.
To avoid regressions with other switch ICs the new MICREL_NO_EEE flag
has been introduced.
Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV
MMD register is removed, as this code is both; now executed too late
(after previous rework of the PHY and DSA for KSZ switches) and not
required as setting all members of eee_broken_modes bit field prevents
the KSZ9477 from advertising EEE.
Fixes: 69d3b36ca0 ("net: dsa: microchip: enable EEE support") # for KSZ9477
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ceph updates from Ilya Dryomov:
"Mixed with some fixes and cleanups, this brings in reasonably complete
fscrypt support to CephFS! The list of things which don't work with
encryption should be fairly short, mostly around the edges: fallocate
(not supported well in CephFS to begin with), copy_file_range
(requires re-encryption), non-default striping patterns.
This was a multi-year effort principally by Jeff Layton with
assistance from Xiubo Li, Luís Henriques and others, including several
dependant changes in the MDS, netfs helper library and fscrypt
framework itself"
* tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client: (53 commits)
ceph: make num_fwd and num_retry to __u32
ceph: make members in struct ceph_mds_request_args_ext a union
rbd: use list_for_each_entry() helper
libceph: do not include crypto/algapi.h
ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper
ceph: fix updating i_truncate_pagecache_size for fscrypt
ceph: wait for OSD requests' callbacks to finish when unmounting
ceph: drop messages from MDS when unmounting
ceph: update documentation regarding snapshot naming limitations
ceph: prevent snapshot creation in encrypted locked directories
ceph: add support for encrypted snapshot names
ceph: invalidate pages when doing direct/sync writes
ceph: plumb in decryption during reads
ceph: add encryption support to writepage and writepages
ceph: add read/modify/write to ceph_sync_write
ceph: align data in pages in ceph_sync_write
ceph: don't use special DIO path for encrypted inodes
ceph: add truncate size handling support for fscrypt
ceph: add object version support for sync read
libceph: allow ceph_osdc_new_request to accept a multi-op read
...
Pull input updates from Dmitry Torokhov:
- a new driver for Azoteq IQS7210A/7211A/E touch controllers
- support for Azoteq IQS7222D variant added to iqs7222 driver
- support for touch keys functionality added to Melfas MMS114 driver
- new hardware IDs added to exc3000 and Goodix drivers
- xpad driver gained support for GameSir T4 Kaleid Controller
- a fix for xpad driver to properly support some third-party
controllers that need a magic packet to start properly
- a fix for psmouse driver to more reliably switch to RMI4 mode on
devices that use native RMI4/SMbus protocol
- a quirk for i8042 for TUXEDO Gemini 17 Gen1/Clevo PD70PN laptops
- multiple drivers have been updated to make use of devm and other
newer APIs such as dev_err_probe(), devm_regulator_get_enable(), and
others.
* tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (83 commits)
Input: goodix - add support for ACPI ID GDX9110
Input: rpckbd - fix the return value handle for platform_get_irq()
Input: tca6416-keypad - switch to using input core's polling features
Input: tca6416-keypad - convert to use devm_* api
Input: tca6416-keypad - fix interrupt enable disbalance
Input: tca6416-keypad - rely on I2C core to set up suspend/resume
Input: tca6416-keypad - always expect proper IRQ number in i2c client
Input: lm8323 - convert to use devm_* api
Input: lm8323 - rely on device core to create kp_disable attribute
Input: qt2160 - convert to use devm_* api
Input: qt2160 - do not hard code interrupt trigger
Input: qt2160 - switch to using threaded interrupt handler
Input: qt2160 - tweak check for i2c adapter functionality
Input: psmouse - add delay when deactivating for SMBus mode
Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe()
Input: qt1070 - convert to use devm_* api
Input: mcs-touchkey - convert to use devm_* api
Input: amikbd - convert to use devm_* api
Input: lm8333 - convert to use devm_* api
Input: mms114 - add support for touch keys
...
MIPS, LoongArch and some other architectures have many holes between
different segments and the valid address space (256T available) is
insufficient to map all these segments to kasan shadow memory with the
common formula provided by kasan core. So we need architecture specific
mapping formulas to ensure different segments are mapped individually,
and only limited space lengths of those specific segments are mapped to
shadow.
Therefore, when the incoming address is converted to a shadow, we need
to add a condition to determine whether it is valid.
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Similar to the syndrome calculation, the recovery algorithms also work
on 64 bytes at a time to align with the L1 cache line size of current
and future LoongArch cores (that we care about). Which means
unrolled-by-4 LSX and unrolled-by-2 LASX code.
The assembly is originally based on the x86 SSSE3/AVX2 ports, but
register allocation has been redone to take advantage of LSX/LASX's 32
vector registers, and instruction sequence has been optimized to suit
(e.g. LoongArch can perform per-byte srl and andi on vectors, but x86
cannot).
Performance numbers measured by instrumenting the raid6test code, on a
3A5000 system clocked at 2.5GHz:
> lasx 2data: 354.987 MiB/s
> lasx datap: 350.430 MiB/s
> lsx 2data: 340.026 MiB/s
> lsx datap: 337.318 MiB/s
> intx1 2data: 164.280 MiB/s
> intx1 datap: 187.966 MiB/s
Because recovery algorithms are chosen solely based on priority and
availability, lasx is marked as priority 2 and lsx priority 1. At least
for the current generation of LoongArch micro-architectures, LASX should
always be faster than LSX whenever supported, and have similar power
consumption characteristics (because the only known LASX-capable uarch,
the LA464, always compute the full 256-bit result for vector ops).
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The algorithms work on 64 bytes at a time, which is the L1 cache line
size of all current and future LoongArch cores (that we care about), as
confirmed by Huacai. The code is based on the generic int.uc algorithm,
unrolled 4 times for LSX and 2 times for LASX. Further unrolling does
not meaningfully improve the performance according to experiments.
Performance numbers measured during system boot on a 3A5000 @ 2.5GHz:
> raid6: lasx gen() 12726 MB/s
> raid6: lsx gen() 10001 MB/s
> raid6: int64x8 gen() 2876 MB/s
> raid6: int64x4 gen() 3867 MB/s
> raid6: int64x2 gen() 2531 MB/s
> raid6: int64x1 gen() 1945 MB/s
Comparison of xor() speeds (from different boots but meaningful anyway):
> lasx: 11226 MB/s
> lsx: 6395 MB/s
> int64x4: 2147 MB/s
Performance as measured by raid6test:
> raid6: lasx gen() 25109 MB/s
> raid6: lsx gen() 13233 MB/s
> raid6: int64x8 gen() 4164 MB/s
> raid6: int64x4 gen() 6005 MB/s
> raid6: int64x2 gen() 5781 MB/s
> raid6: int64x1 gen() 4119 MB/s
> raid6: using algorithm lasx gen() 25109 MB/s
> raid6: .... xor() 14439 MB/s, rmw enabled
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
sphinx complains about the use of "%PHYLINK_PCS_NEG_*":
Documentation/networking/kapi:144: ./include/linux/phylink.h:601: WARNING: Inline literal start-string without end-string.
Documentation/networking/kapi:144: ./include/linux/phylink.h:633: WARNING: Inline literal start-string without end-string.
These are not valid symbols so drop the '%' prefix.
Alternatively we could use %PHYLINK_PCS_NEG_\* (escape the *)
or use normal literal ``PHYLINK_PCS_NEG_*`` but there is already
a handful of un-adorned DEFINE_* in this file.
Fixes: f99d471afa ("net: phylink: add PCS negotiation mode")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
team interface has used a dynamic lockdep key to avoid false-positive
lockdep deadlock detection. Virtual interfaces such as team usually
have their own lock for protecting private data.
These interfaces can be nested.
team0
|
team1
Each interface's lock is actually different(team0->lock and team1->lock).
So,
mutex_lock(&team0->lock);
mutex_lock(&team1->lock);
mutex_unlock(&team1->lock);
mutex_unlock(&team0->lock);
The above case is absolutely safe. But lockdep warns about deadlock.
Because the lockdep understands these two locks are same. This is a
false-positive lockdep warning.
So, in order to avoid this problem, the team interfaces started to use
dynamic lockdep key. The false-positive problem was fixed, but it
introduced a new problem.
When the new team virtual interface is created, it registers a dynamic
lockdep key(creates dynamic lockdep key) and uses it. But there is the
limitation of the number of lockdep keys.
So, If so many team interfaces are created, it consumes all lockdep keys.
Then, the lockdep stops to work and warns about it.
In order to fix this problem, team interfaces use the subclass instead
of the dynamic key. So, when a new team interface is created, it doesn't
register(create) a new lockdep, but uses existed subclass key instead.
It is already used by the bonding interface for a similar case.
As the bonding interface does, the subclass variable is the same as
the 'dev->nested_level'. This variable indicates the depth in the stacked
interface graph.
The 'dev->nested_level' is protected by RTNL and RCU.
So, 'mutex_lock_nested()' for 'team->lock' requires RTNL or RCU.
In the current code, 'team->lock' is usually acquired under RTNL, there is
no problem with using 'dev->nested_level'.
The 'team_nl_team_get()' and The 'lb_stats_refresh()' functions acquire
'team->lock' without RTNL.
But these don't iterate their own ports nested so they don't need nested
lock.
Reproducer:
for i in {0..1000}
do
ip link add team$i type team
ip link add dummy$i master team$i type dummy
ip link set dummy$i up
ip link set team$i up
done
Splat looks like:
BUG: MAX_LOCKDEP_ENTRIES too low!
turning off the locking correctness validator.
Please attach the output of /proc/lock_stat to the bug report
CPU: 0 PID: 4104 Comm: ip Not tainted 6.5.0-rc7+ #45
Call Trace:
<TASK>
dump_stack_lvl+0x64/0xb0
add_lock_to_list+0x30d/0x5e0
check_prev_add+0x73a/0x23a0
...
sock_def_readable+0xfe/0x4f0
netlink_broadcast+0x76b/0xac0
nlmsg_notify+0x69/0x1d0
dev_open+0xed/0x130
...
Reported-by: syzbot+9bbbacfbf1e04d5221f7@syzkaller.appspotmail.com
Fixes: 369f61bee0 ("team: fix nested locking lockdep warning")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds a new line to the docstrings of functions wrapping __xa_alloc() and
__xa_alloc_cyclic(), informing about the necessity of flag XA_FLAGS_ALLOC
being set previously.
The documentation so far says that functions wrapping __xa_alloc() and
__xa_alloc_cyclic() are supposed to return either -ENOMEM or -EBUSY in
case of an error. If the xarray has been initialized without the flag
XA_FLAGS_ALLOC, however, they fail with a different, undocumented error
code.
As hinted at in Documentation/core-api/xarray.rst, wrappers around these
functions should only be invoked when the flag has been set. The
functions' documentation should reflect that as well.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Pull fuse updates from Miklos Szeredi:
- Revert non-waiting FLUSH due to a regression
- Fix a lookup counter leak in readdirplus
- Add an option to allow shared mmaps in no-cache mode
- Add btime support and statx intrastructure to the protocol
- Invalidate positive/negative dentry on failed create/delete
* tag 'fuse-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: conditionally fill kstat in fuse_do_statx()
fuse: invalidate dentry on EEXIST creates or ENOENT deletes
fuse: cache btime
fuse: implement statx
fuse: add ATTR_TIMEOUT macro
fuse: add STATX request
fuse: handle empty request_mask in statx
fuse: write back dirty pages before direct write in direct_io_relax mode
fuse: add a new fuse init flag to relax restrictions in no cache mode
fuse: invalidate page cache pages before direct write
fuse: nlookup missing decrement in fuse_direntplus_link
Revert "fuse: in fuse_flush only wait if someone wants the return code"
There are no more users of thermal_zone_device_register(), so drop it
from the core.
Note that thermal_zone_device_register_with_trips() may be renamed to
thermal_zone_device_register() in the future, but only after a grace
period allowing all of the possible work in progress that may be using
the latter to adjust.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Multiple callers of thermal_zone_device_register() don't pass any trips
to it and they might use a shortened argument list for that, so add
a special function with fewer arguments for this purpose.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For consistency, add a missing thermal_zone_device_register_with_trips()
stub for the CONFIG_THERMAL unset case, specify argument names in all of
the thermal zone registration and unregistration function headers and
make all of them use white space consistently.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ata updates from Damien Le Moal:
- Fix OF include file for ata platform drivers (Rob)
- Simplify various ahci, sata and pata platform drivers using the
function devm_platform_ioremap_resource() (Yangtao)
- Cleanup libata time related argument types (e.g. timeouts values)
(Sergey)
- Cleanup libata code around error handling as all ata drivers now
define a error_handler operation (Hannes and Niklas)
- Remove functions intended for libsas that are in fact unused (Niklas)
- Change the remove device callback of platform drivers to a null
function (Uwe)
- Simplify the pata_imx driver using devm_clk_get_enabled() (Li)
- Remove old and uinused remnants of the ide code in arm, parisc,
powerpc, sparc and m68k architectures and associated drivers
(pata_buddha, pata_falcon and pata_gayle) (Geert)
- Add missing MODULE_DESCRIPTION() in the sata_gemini and pata_ftide010
drivers (me)
- Several fixes for the pata_ep93xx and pata_falcon drivers (Nikita,
Michael)
- Add Elkhart Lake AHCI controller support to the ahci driver (Werner)
- Disable NCQ trim on Micron 1100 drives (Pawel)
* tag 'ata-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (60 commits)
ata: libata-core: Disable NCQ_TRIM on Micron 1100 drives
ata: ahci: Add Elkhart Lake AHCI controller
ata: pata_falcon: add data_swab option to byte-swap disk data
ata: pata_falcon: fix IO base selection for Q40
ata: pata_ep93xx: use soc_device_match for UDMA modes
ata: pata_ep93xx: fix error return code in probe
ata: sata_gemini: Add missing MODULE_DESCRIPTION
ata: pata_ftide010: Add missing MODULE_DESCRIPTION
m68k: Remove <asm/ide.h>
ata: pata_gayle: Remove #include <asm/ide.h>
ata: pata_falcon: Remove #include <asm/ide.h>
ata: pata_buddha: Remove #include <asm/ide.h>
asm-generic: Remove ide_iops.h
sparc: Remove <asm/ide.h>
powerpc: Remove <asm/ide.h>
parisc: Remove <asm/ide.h>
ARM: Remove <asm/ide.h>
ata: pata_imx: Use helper function devm_clk_get_enabled()
ata: sata_rcar: Convert to platform remove callback returning void
ata: sata_mv: Convert to platform remove callback returning void
...
Pull Kbuild updates from Masahiro Yamada:
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow,
and -Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and
sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined
anywhere
- Show help messages of config fragments in 'make help'
* tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (62 commits)
kconfig: fix possible buffer overflow
kbuild: Show marked Kconfig fragments in "help"
kconfig: add warn-unknown-symbols sanity check
kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BE
Documentation/llvm: refresh docs
modpost: Skip .llvm.call-graph-profile section check
kbuild: support modules_sign for external modules as well
kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n
kbuild: move more module installation code to scripts/Makefile.modinst
kbuild: reduce the number of mkdir calls during modules_install
kbuild: remove $(MODLIB)/source symlink
kbuild: move depmod rule to scripts/Makefile.modinst
kbuild: add modules_sign to no-{compiler,sync-config}-targets
kbuild: do not run depmod for 'make modules_sign'
kbuild: deb-pkg: support DEB_BUILD_OPTIONS=parallel=N in debian/rules
alpha: remove <asm/export.h>
alpha: replace #include <asm/export.h> with #include <linux/export.h>
ia64: remove <asm/export.h>
ia64: replace #include <asm/export.h> with #include <linux/export.h>
sparc: remove <asm/export.h>
...
Pull more MM updates from Andrew Morton:
- Stefan Roesch has added ksm statistics to /proc/pid/smaps
- Also a number of singleton patches, mainly cleanups and leftovers
* tag 'mm-stable-2023-09-04-14-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/kmemleak: move up cond_resched() call in page scanning loop
mm: page_alloc: remove stale CMA guard code
MAINTAINERS: add rmap.h to mm entry
rmap: remove anon_vma_link() nommu stub
proc/ksm: add ksm stats to /proc/pid/smaps
mm/hwpoison: rename hwp_walk* to hwpoison_walk*
mm: memory-failure: add PageOffline() check
rqstlen and rsplen were changed to __le32 to fix sparse warnings:
drivers/scsi/qla2xxx/qla_nvme.c:402:30: warning: incorrect type in assignment (different base types)
drivers/scsi/qla2xxx/qla_nvme.c:402:30: expected restricted __le32 [usertype] cmd_len
drivers/scsi/qla2xxx/qla_nvme.c:402:30: got unsigned short [usertype] rsplen
drivers/scsi/qla2xxx/qla_nvme.c:507:30: warning: incorrect type in assignment (different base types)
drivers/scsi/qla2xxx/qla_nvme.c:507:30: expected restricted __le32 [usertype] cmd_len
drivers/scsi/qla2xxx/qla_nvme.c:507:30: got unsigned int [usertype] rqstlen
drivers/scsi/qla2xxx/qla_nvme.c:508:30: warning: incorrect type in assignment (different base types)
drivers/scsi/qla2xxx/qla_nvme.c:508:30: expected restricted __le32 [usertype] rsp_len
drivers/scsi/qla2xxx/qla_nvme.c:508:30: got unsigned int [usertype] rsplen
Correct the endianness in qla2xxx driver thus avoiding changes in
nvme-fc-driver.h.
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230831112146.32595-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull more power management updates from Rafael Wysocki:
"These fix cpufreq core and the pcc cpufreq driver, add per-policy
boost support to cpufreq and add Georgian translation Makefile
LANGUAGES in cpupower.
Specifics:
- Add Georgian translation to Makefile LANGUAGES in cpupower (Shuah
Khan).
- Add support for per-policy performance boost to cpufreq (Jie Zhan).
- Fix assorted issues in the cpufreq core, common governor code and
in the pcc cpufreq driver (Liao Chang)"
* tag 'pm-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Support per-policy performance boost
cpufreq: pcc: Fix the potentinal scheduling delays in target_index()
cpufreq: governor: Free dbs_data directly when gov->init() fails
cpufreq: Fix the race condition while updating the transition_task of policy
cpufreq: Avoid printing kernel addresses in cpufreq_resume()
cpupower: Add Georgian translation to Makefile LANGUAGES
Pull more thermal control updates from Rafael Wysocki:
"These are mostly updates of thermal control drivers for ARM platforms,
new thermal control support for Loongson-2 and a couple of core
cleanups made possible by recent changes merged previously.
Specifics:
- Check if the Tegra BPMP supports the trip points in order to set
the .set_trips callback (Mikko Perttunen)
- Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo
Zhu)
- Use IS_ERR_OR_NULL() helper to replace a double test on the TI
bandgap sensor (Li Zetao)
- Remove redundant platform_set_drvdata() calls, as there are no
corresponding calls to platform_get_drvdata(), from a bunch of
drivers (Andrei Coardos)
- Switch the Mediatek LVTS mode to filtered in order to enable
interrupts (Nícolas F. R. A. Prado)
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski)
- Remove redundant dev_err_probe(), because the underlying function
already called it, from the Mediatek sensor (Chen Jiahao)
- Free calibration nvmem after reading it on sun8i (Mark Brown)
- Remove useless comment from the sun8i driver (Yangtao Li)
- Make tsens_xxxx_nvmem static to fix a sparse warning on QCom tsens
(Min-Hua Chen)
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
- Fix parameter check in lvts_debugfs_init() with IS_ERR() on
Mediatek LVTS (Minjie Du)
- Fix interrupt routine and configuratoin for Mediatek LVTS (Nícolas
F. R. A. Prado)
- Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst()
thermal zone callbacks from the core and rework the .get_trend()
one to take a trip point pointer as an argument (Rafael Wysocki)"
* tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: Rework .get_trend() thermal zone callback
thermal: core: Drop unused .get_trip_*() callbacks
thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
thermal: dt-bindings: add loongson-2 thermal
thermal/drivers/loongson-2: Add thermal management support
thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata()
thermal/drivers/max77620_thermal: Removed unneeded call to platform_set_drvdata()
thermal/drivers/mediatek/auxadc_thermal: Removed call to platform_set_drvdata()
thermal/drivers/sun8i_thermal: Remove unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/brcstb_thermal: Removed unneeded platform_set_drvdata()
thermal/drivers/mediatek/lvts_thermal: Make readings valid in filtered mode
thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata()
thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/sr-thermal: Removed call to platform_set_drvdata()
thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
thermal/drivers/db8500: Remove redundant of_match_ptr()
thermal/drivers/mediatek: Clean up redundant dev_err_probe()
thermal/drivers/sun8i: Free calibration nvmem after reading it
thermal/drivers/sun8i: Remove unneeded comments
...
Pull remoteproc updates from Bjorn Andersson:
"Support for booting the iMX remoteprocs using MMIO, instead of SMCCC
is added. The iMX driver is also extended to support delivering
interrupts from an arbitrary number of vdev.
Support is added to the TI PRU driver, to allow GPMUX to be controlled
from DeviceTree.
The Qualcomm coredump collector is extended to fall back to generating
a full coredump, in the case that the loaded firmware doesn't support
generating minidump. The overly terse MD abbreviation of "MINIDUMP" is
expanded, to make the code easier on the eye.
The list of Qualcomm Sensor Low Power Island (SLPI) instances
supported is cleaned up, and SDM845 is added. SDM630/636/660 support
for the modem subsystem (mss) is added.
All the Qualcomm drivers are transitioned to of_reserved_mem_lookup()
instead of open coding the resolution of reserved-memory regions, to
gain handling of error cases. A couple of drivers are transitioned to
use devm_platform_ioremap_resource_byname().
The stm32 remoteproc driver's PM operations are updated to modern
macros, to avoid the "unused variable"-warning in some configurations.
Drivers are transitioned away from directly including of_device.h"
* tag 'rproc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
remoteproc: pru: add support for configuring GPMUX based on client setup
remoteproc: stm32: fix incorrect optional pointers
remoteproc: imx_rproc: Switch iMX8MN/MP from SMCCC to MMIO
dt-bindings: remoteproc: imx_rproc: Support i.MX8MN/P MMIO
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Fix 8996 clocks
remoteproc: qcom: pas: add SDM845 SLPI compatible
remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible
remoteproc: qcom: Expand MD_* as MINIDUMP_*
remoteproc: qcom: pas: refactor SLPI remoteproc init
dt-bindings: remoteproc: qcom: adsp: add qcom,sdm845-slpi-pas compatible
remoteproc: qcom: wcnss: use devm_platform_ioremap_resource_byname()
remoteproc: qcom: q6v5: use devm_platform_ioremap_resource_byname()
dt-bindings: remoteproc: qcom: sm6115-pas: Add QCM2290
remoteproc: qcom: Add full coredump fallback mechanism
remoteproc: core: Export the rproc coredump APIs
remoteproc: qcom: Use of_reserved_mem_lookup()
remoteproc: imx_rproc: iterate all notifiyids in rx callback
dt-bindings: remoteproc: qcom,adsp: bring back firmware-name
dt-bindings: remoteproc: qcom,sm8550-pas: require memory-region
...
Pull rpmsg updates from Bjorn Andersson:
"Add support for the GLINK flow control signals, and expose this to the
user through the rpmsg_char interface. Add missing kstrdup() failure
handling during allocation of GLINK channel objects"
* tag 'rpmsg-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Avoid dereferencing NULL channel
rpmsg: glink: Add check for kstrdup
rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support
rpmsg: glink: Add support to handle signals command
rpmsg: core: Add signal API support
Pull LED updates from Lee Jones:
"Core Frameworks:
- Add new framework to support Group Multi-Color (GMC) LEDs
- Offer an 'optional' API for non-essential LEDs
- Support obtaining 'max brightness' values from Device Tree
- Provide new led_classdev member 'color' (settable via DT and SYFS)
- Stop TTY Trigger from using the old LED_ON constraints
- Statically allocate leds_class
New Drivers:
- Add support for NXP PCA995x I2C Constant Current LED Driver
New Device Support:
- Add support for Siemens Simatic IPC BX-21 to Simatic IPC
Fix-ups:
- Some dependency / Kconfig tweaking
- Move final probe() functions back over from .probe_new()
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Fix trivial styling issues; comments
- Ensure correct includes are present and remove some that are not
required
- Omit the use of redundant casts and if relevant replace with better
ones
- Use purpose-built APIs for various actions; sysfs_emit(),
module_led_trigger()
- Remove a bunch of superfluous locking
Bug Fixes:
- Ensure error codes are correctly propagated back up the call chain
- Fix incorrect error values from being returned (missing '-')
- Ensure get'ed resources are put'ed to prevent leaks
- Use correct class when exporting module resources
- Fixing rounding (or lack there of) issues
- Fix 'always false' LED_COLOR_ID_MULTI BUG() check"
* tag 'leds-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (40 commits)
leds: aw2013: Enable pull-up supply for interrupt and I2C
dt-bindings: leds: Document pull-up supply for interrupt and I2C
dt-bindings: leds: aw2013: Document interrupt
leds: uleds: Use module_misc_device macro to simplify the code
leds: trigger: netdev: Use module_led_trigger macro to simplify the code
dt-bindings: leds: Fix reference to definition of default-state
leds: turris-omnia: Drop unnecessary mutex locking
leds: turris-omnia: Use sysfs_emit() instead of sprintf()
leds: Make leds_class a static const structure
leds: Remove redundant of_match_ptr()
dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead
dt-bindings: leds: rohm,bd71828: Drop select:false
leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
leds: multicolor: Use rounded division when calculating color components
leds: rgb: Add a multicolor LED driver to group monochromatic LEDs
dt-bindings: leds: Add binding for a multicolor group of LEDs
leds: class: Store the color index in struct led_classdev
leds: Provide devm_of_led_get_optional()
leds: pca995x: Fix MODULE_DEVICE_TABLE for OF
...
Pull NFD updates from Lee Jones:
"New Drivers:
- Add support for the Cirrus Logic CS42L43 Audio CODEC
Fix-ups:
- Make use of specific printk() format tags for various optimisations
- Kconfig / module modifications / tweaking
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Convert a bunch of Regmap configurations to use the Maple Tree
cache
- Ensure correct includes are present and remove some that are not
required
- Remove superfluous code
- Reduce amount of cycles spent in critical sections
- Omit the use of redundant casts and if relevant replace with better
ones
- Swap out raw_spin_{un}lock_irq{save,restore}() for
spin_{un}lock_irq{save,restore}()
Bug Fixes:
- Repair theoretical deadlock situation
- Fix some link-time dependencies
- Use more appropriate datatype when casting"
* tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (70 commits)
mfd: mc13xxx: Simplify device data fetching in probe()
mfd: rz-mtu3: Replace raw_spin_lock->spin_lock()
mfd: rz-mtu3: Reduce critical sections
mfd: mxs-lradc: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm31x: Fix Wvoid-pointer-to-enum-cast warning
mfd: wm8994: Fix Wvoid-pointer-to-enum-cast warning
mfd: tc3589: Fix Wvoid-pointer-to-enum-cast warning
mfd: lp87565: Fix Wvoid-pointer-to-enum-cast warning
mfd: hi6421-pmic: Fix Wvoid-pointer-to-enum-cast warning
mfd: max77541: Fix Wvoid-pointer-to-enum-cast warning
mfd: max14577: Fix Wvoid-pointer-to-enum-cast warning
mfd: stmpe: Fix Wvoid-pointer-to-enum-cast warning
mfd: rn5t618: Remove redundant of_match_ptr()
mfd: lochnagar-i2c: Remove redundant of_match_ptr()
mfd: stpmic1: Remove redundant of_match_ptr()
mfd: act8945a: Remove redundant of_match_ptr()
mfd: rsmu_spi: Remove redundant of_match_ptr()
mfd: altera-a10sr: Remove redundant of_match_ptr()
mfd: rsmu_i2c: Remove redundant of_match_ptr()
mfd: tc3589x: Remove redundant of_match_ptr()
...
Pull i2c updates from Wolfram Sang:
"I2C has mainly cleanups this time and a few driver improvements.
Because a lot of developers were on holidays (including myself) it was
a good timing to apply lots of cleanups which would normally cause
merge conflicts with other floating patches. Extra thanks go to Andi
Shyti who backed me up when I was on a four week hiatus. This is also
the reason that some patches were commited later than ideal"
* tag 'i2c-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (67 commits)
i2c: at91: Use dev_err_probe() instead of dev_err()
I2C: ali15x3: Do PCI error checks on own line
i2c: Make return value check more accurate and explicit for devm_pinctrl_get()
i2c: designware: Add support for recovery when GPIO need pinctrl
i2c: mlxcpld: Add support for extended transaction length
i2c: mlxcpld: Allow driver to run on ARM64 architecture
i2c: nforce2: Do PCI error check on own line
i2c: sis5595: Do PCI error checks on own line
i2c: qcom-cci: Fix error checking in cci_probe()
i2c: muxes: pca954x: Add regulator support
i2c: muxes: pca954x: Add MAX735x/MAX736x support
dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
dt-bindings: i2c: pca954x: Correct interrupt support
i2c: pnx: Use devm_platform_get_and_ioremap_resource()
i2c: pxa: Use devm_platform_get_and_ioremap_resource()
i2c: s3c2410: Use devm_platform_get_and_ioremap_resource()
i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource()
i2c: st: Use devm_platform_get_and_ioremap_resource()
i2c: qcom-geni: Convert to devm_platform_ioremap_resource()
i2c: stm32f4: Use devm_platform_get_and_ioremap_resource()
...
Pull printk updates from Petr Mladek:
- Do not try to get the console lock when it is not need or useful in
panic()
- Replace the global console_suspended state by a per-console flag
- Export symbols needed for dumping the raw printk buffer in panic()
- Fix documentation of printf formats for integer types
- Moved Sergey Senozhatsky to the reviewer role
- Misc cleanups
* tag 'printk-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: export symbols for debug modules
lib: test_scanf: Add explicit type cast to result initialization in test_number_prefix()
printk: ringbuffer: Fix truncating buffer size min_t cast
printk: Rename abandon_console_lock_in_panic() to other_cpu_in_panic()
printk: Add per-console suspended state
printk: Consolidate console deferred printing
printk: Do not take console lock for console_flush_on_panic()
printk: Keep non-panic-CPUs out of console lock
printk: Reduce console_unblank() usage in unsafe scenarios
kdb: Do not assume write() callback available
docs: printk-formats: Treat char as always unsigned
docs: printk-formats: Fix hex printing of signed values
MAINTAINERS: adjust printk/vsprintf entries
Pull UML updates from Richard Weinberger:
- Drop 32-bit checksum implementation and re-use it from arch/x86
- String function cleanup
- Fixes for -Wmissing-variable-declarations and -Wmissing-prototypes
builds
* tag 'uml-for-linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: virt-pci: fix missing declaration warning
um: Refactor deprecated strncpy to memcpy
um: fix 3 instances of -Wmissing-prototypes
um: port_kern: fix -Wmissing-variable-declarations
uml: audio: fix -Wmissing-variable-declarations
um: vector: refactor deprecated strncpy
um: use obj-y to descend into arch/um/*/
um: Hard-code the result of 'uname -s'
um: Use the x86 checksum implementation on 32-bit
asm-generic: current: Don't include thread-info.h if building asm
um: Remove unsued extern declaration ldt_host_info()
um: Fix hostaudio build errors
um: Remove strlcpy usage
Pull hyperv updates from Wei Liu:
- Support for SEV-SNP guests on Hyper-V (Tianyu Lan)
- Support for TDX guests on Hyper-V (Dexuan Cui)
- Use SBRM API in Hyper-V balloon driver (Mitchell Levy)
- Avoid dereferencing ACPI root object handle in VMBus driver (Maciej
Szmigiero)
- A few misecllaneous fixes (Jiapeng Chong, Nathan Chancellor, Saurabh
Sengar)
* tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: Remove duplicate include
x86/hyperv: Move the code in ivm.c around to avoid unnecessary ifdef's
x86/hyperv: Remove hv_isolation_type_en_snp
x86/hyperv: Use TDX GHCI to access some MSRs in a TDX VM with the paravisor
Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor
x86/hyperv: Introduce a global variable hyperv_paravisor_present
Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM
x86/hyperv: Fix serial console interrupts for fully enlightened TDX guests
Drivers: hv: vmbus: Support fully enlightened TDX guests
x86/hyperv: Support hypercalls for fully enlightened TDX guests
x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests
x86/hyperv: Fix undefined reference to isolation_type_en_snp without CONFIG_HYPERV
x86/hyperv: Add missing 'inline' to hv_snp_boot_ap() stub
hv: hyperv.h: Replace one-element array with flexible-array member
Drivers: hv: vmbus: Don't dereference ACPI root object handle
x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES
x86/hyperv: Add smp support for SEV-SNP guest
clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest
x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest
drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest
...
Pull virtio updates from Michael Tsirkin:
"A small pull request this time around, mostly because the vduse
network got postponed to next relase so we can be sure we got the
security store right"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_ring: fix avail_wrap_counter in virtqueue_add_packed
virtio_vdpa: build affinity masks conditionally
virtio_net: merge dma operations when filling mergeable buffers
virtio_ring: introduce dma sync api for virtqueue
virtio_ring: introduce dma map api for virtqueue
virtio_ring: introduce virtqueue_reset()
virtio_ring: separate the logic of reset/enable from virtqueue_resize
virtio_ring: correct the expression of the description of virtqueue_resize()
virtio_ring: skip unmap for premapped
virtio_ring: introduce virtqueue_dma_dev()
virtio_ring: support add premapped buf
virtio_ring: introduce virtqueue_set_dma_premapped()
virtio_ring: put mapping error check in vring_map_one_sg
virtio_ring: check use_dma_api before unmap desc for indirect
vdpa_sim: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
vdpa: add get_backend_features vdpa operation
vdpa: accept VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK backend feature
vdpa: add VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK flag
vdpa/mlx5: Remove unused function declarations
Previously, the defines for phy_device flags in the Micrel driver were
ambiguous in their representation. They were intended to be bit masks
but were mistakenly defined as bit positions. This led to the following
issues:
- MICREL_KSZ8_P1_ERRATA, designated for KSZ88xx switches, overlapped
with MICREL_PHY_FXEN and MICREL_PHY_50MHZ_CLK.
- Due to this overlap, the code path for MICREL_PHY_FXEN, tailored for
the KSZ8041 PHY, was not executed for KSZ88xx PHYs.
- Similarly, the code associated with MICREL_PHY_50MHZ_CLK wasn't
triggered for KSZ88xx.
To rectify this, all three flags have now been explicitly converted to
use the `BIT()` macro, ensuring they are defined as bit masks and
preventing potential overlaps in the future.
Fixes: 49011e0c15 ("net: phy: micrel: ksz886x/ksz8081: add cabletest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
These API has been introduced:
* virtqueue_dma_need_sync
* virtqueue_dma_sync_single_range_for_cpu
* virtqueue_dma_sync_single_range_for_device
These APIs can be used together with the premapped mechanism to sync the
DMA address.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-12-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This helper allows the driver change the dma mode to premapped mode.
Under the premapped mode, the virtio core do not do dma mapping
internally.
This just work when the use_dma_api is true. If the use_dma_api is false,
the dma options is not through the DMA APIs, that is not the standard
way of the linux kernel.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20230810123057.43407-4-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This operation allow vdpa parent to expose its own backend feature bits.
Next patches introduce a feature not compatible with all parent drivers:
the ability to enable vq after driver_ok. Each parent must declare if
it allows it or not.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-4-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This feature flag allows the driver enabling virtqueues both before and
after DRIVER_OK.
This is needed for software assisted live migration, so userland can
restore the device status in devices with control virtqueue before the
dataplane is enabled.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-2-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull soundwire updates from Vinod Koul:
"Device numbering and intel driver changes are main features:
- Core support for soundwire device number allocation
- intel driver updates for adding hw_params for DAI ops, hybrid
number allocation and power managemnt callback updates
- DT header include changes for subsystem"
* tag 'soundwire-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add DAI hw_params/prepare/hw_free callbacks
soundwire: intel_auxdevice: add hybrid IDA-based device_number allocation
soundwire: bus: add callbacks for device_number allocation
soundwire: extend parameters of new_peripheral_assigned() callback
soundWire: intel_auxdevice: resume 'sdw-master' on startup and system resume
soundwire: intel_auxdevice: enable pm_runtime earlier on startup
soundwire: Explicitly include correct DT includes
Pull MTD updates from Miquel Raynal:
"Core MTD changes:
- Use refcount to prevent corruption
- Call external _get and _put in right order
- Fix use-after-free in mtd release
- Explicitly include correct DT includes
- Clean refcounting with MTD_PARTITIONED_MASTER
- mtdblock: make warning messages ratelimited
- dt-bindings: Add SEAMA partition bindings
Device driver changes:
- Use devm helper functions
- Fix questionable cast, remove pointless ones.
- error handling fixes
- add support for new chip versions
- update DT bindings
- misc cleanups - fix typos, whitespace, indentation"
* tag 'mtd/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (105 commits)
dt-bindings: mtd: amlogic,meson-nand: drop unneeded quotes
mtd: spear_smi: Use helper function devm_clk_get_enabled()
mtd: rawnand: orion: Use helper function devm_clk_get_optional_enabled()
mtd: rawnand: vf610_nfc: Use helper function devm_clk_get_enabled()
mtd: rawnand: sunxi: Use helper function devm_clk_get_enabled()
mtd: rawnand: stm32_fmc2: Use helper function devm_clk_get_enabled()
mtd: rawnand: mtk: Use helper function devm_clk_get_enabled()
mtd: rawnand: mpc5121: Use helper function devm_clk_get_enabled()
mtd: rawnand: lpc32xx_slc: Use helper function devm_clk_get_enabled()
mtd: rawnand: intel: Use helper function devm_clk_get_enabled()
mtd: rawnand: fsmc: Use helper function devm_clk_get_enabled()
mtd: rawnand: arasan: Use helper function devm_clk_get_enabled()
mtd: rawnand: qcom: Add read/read_start ops in exec_op path
mtd: rawnand: qcom: Clear buf_count and buf_start in raw read
mtd: maps: fix -Wvoid-pointer-to-enum-cast warning
mtd: rawnand: fix -Wvoid-pointer-to-enum-cast warning
mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume()
mtd: rawnand: Propagate error and simplify ternary operators for brcmstb_nand_wait_for_completion()
mtd: rawnand: qcom: Sort includes alphabetically
mtd: rawnand: qcom: Do not override the error no of submit_descs()
...
Pull probes updates from Masami Hiramatsu:
- kprobes: use struct_size() for variable size kretprobe_instance data
structure.
- eprobe: Simplify trace_eprobe list iteration.
- probe events: Data structure field access support on BTF argument.
- Update BTF argument support on the functions in the kernel
loadable modules (only loaded modules are supported).
- Move generic BTF access function (search function prototype and
get function parameters) to a separated file.
- Add a function to search a member of data structure in BTF.
- Support accessing BTF data structure member from probe args by
C-like arrow('->') and dot('.') operators. e.g.
't sched_switch next=next->pid vruntime=next->se.vruntime'
- Support accessing BTF data structure member from $retval. e.g.
'f getname_flags%return +0($retval->name):string'
- Add string type checking if BTF type info is available. This will
reject if user specify ":string" type for non "char pointer"
type.
- Automatically assume the fprobe event as a function return event
if $retval is used.
- selftests/ftrace: Add BTF data field access test cases.
- Documentation: Update fprobe event example with BTF data field.
* tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Update fprobe event example with BTF field
selftests/ftrace: Add BTF fields access testcases
tracing/fprobe-event: Assume fprobe is a return event by $retval
tracing/probes: Add string type check with BTF
tracing/probes: Support BTF field access from $retval
tracing/probes: Support BTF based data structure field access
tracing/probes: Add a function to search a member of a struct/union
tracing/probes: Move finding func-proto API and getting func-param API to trace_btf
tracing/probes: Support BTF argument on module functions
tracing/eprobe: Iterate trace_eprobe directly
kernel: kprobes: Use struct_size()
Pull more tracing updates from Steven Rostedt:
"Tracing fixes and clean ups:
- Replace strlcpy() with strscpy()
- Initialize the pipe cpumask to zero on allocation
- Use within_module() instead of open coding it
- Remove extra space in hwlat_detectory/mode output
- Use LIST_HEAD() instead of open coding it
- A bunch of clean ups and fixes for the cpumask filter
- Set local da_mon_##name to static
- Fix race in snapshot buffer between cpu write and swap"
* tag 'trace-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/filters: Fix coding style issues
tracing/filters: Change parse_pred() cpulist ternary into an if block
tracing/filters: Fix double-free of struct filter_pred.mask
tracing/filters: Fix error-handling of cpulist parsing buffer
tracing: Zero the pipe cpumask on alloc to avoid spurious -EBUSY
ftrace: Use LIST_HEAD to initialize clear_hash
ftrace: Use within_module to check rec->ip within specified module.
tracing: Replace strlcpy with strscpy in trace/events/task.h
tracing: Fix race issue between cpu buffer write and swap
tracing: Remove extra space at the end of hwlat_detector/mode
rv: Set variable 'da_mon_##name' to static
Pull scheduler fixes from Ingo Molnar:
"Miscellaneous scheduler fixes: a reporting fix, a static symbol fix,
and a kernel-doc fix"
* tag 'sched-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Report correct state for TASK_IDLE | TASK_FREEZABLE
sched/fair: Make update_entity_lag() static
sched/core: Add kernel-doc for set_cpus_allowed_ptr()
