The bring up logic of a to be onlined CPU consists of several parts, which
are considered to be a single hotplug state:
1) Control CPU issues the wake-up
2) To be onlined CPU starts up, does the minimal initialization,
reports to be alive and waits for release into the complete bring-up.
3) Control CPU waits for the alive report and releases the upcoming CPU
for the complete bring-up.
Allow to split this into two states:
1) Control CPU issues the wake-up
After that the to be onlined CPU starts up, does the minimal
initialization, reports to be alive and waits for release into the
full bring-up. As this can run after the control CPU dropped the
hotplug locks the code which is executed on the AP before it reports
alive has to be carefully audited to not violate any of the hotplug
constraints, especially not modifying any of the various cpumasks.
This is really only meant to avoid waiting for the AP to react on the
wake-up. Of course an architecture can move strict CPU related setup
functionality, e.g. microcode loading, with care before the
synchronization point to save further pointless waiting time.
2) Control CPU waits for the alive report and releases the upcoming CPU
for the complete bring-up.
This allows that the two states can be split up to run all to be onlined
CPUs up to state #1 on the control CPU and then at a later point run state
#2. This spares some of the latencies of the full serialized per CPU
bringup by avoiding the per CPU wakeup/wait serialization. The assumption
is that the first AP already waits when the last AP has been woken up. This
obvioulsy depends on the hardware latencies and depending on the timings
this might still not completely eliminate all wait scenarios.
This split is just a preparatory step for enabling the parallel bringup
later. The boot time bringup is still fully serialized. It has a separate
config switch so that architectures which want to support parallel bringup
can test the split of the CPUHP_BRINGUG step separately.
To enable this the architecture must support the CPU hotplug core sync
mechanism and has to be audited that there are no implicit hotplug state
dependencies which require a fully serialized bringup.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205257.080801387@linutronix.de
Commit dce1ca0525 ("sched/scs: Reset task stack state in bringup_cpu()")
ensured that the shadow call stack and KASAN poisoning were removed from
a CPU's stack each time that CPU is brought up, not just once.
This is not incorrect. However, with parallel bringup the idle thread setup
will happen at a different step. As a consequence the cleanup in
bringup_cpu() would be too late.
Move the SCS/KASAN cleanup to the generic _cpu_up() function instead,
which already ensures that the new CPU's stack is available, purely to
allow for early failure. This occurs when the CPU to be brought up is
in the CPUHP_OFFLINE state, which should correctly do the cleanup any
time the CPU has been taken down to the point where such is needed.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205257.027075560@linutronix.de
The CPU state tracking and synchronization mechanism in smpboot.c is
completely independent of the hotplug code and all logic around it is
implemented in architecture specific code.
Except for the state reporting of the AP there is absolutely nothing
architecture specific and the sychronization and decision functions can be
moved into the generic hotplug core code.
Provide an integrated variant and add the core synchronization and decision
points. This comes in two flavours:
1) DEAD state synchronization
Updated by the architecture code once the AP reaches the point where
it is ready to be torn down by the control CPU, e.g. by removing power
or clocks or tear down via the hypervisor.
The control CPU waits for this state to be reached with a timeout. If
the state is reached an architecture specific cleanup function is
invoked.
2) Full state synchronization
This extends #1 with AP alive synchronization. This is new
functionality, which allows to replace architecture specific wait
mechanims, e.g. cpumasks, completely.
It also prevents that an AP which is in a limbo state can be brought
up again. This can happen when an AP failed to report dead state
during a previous off-line operation.
The dead synchronization is what most architectures use. Only x86 makes a
bringup decision based on that state at the moment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205256.476305035@linutronix.de
Pull locking fix from Borislav Petkov:
- Make sure __down_read_common() is always inlined so that the callers'
names land in traceevents output and thus the blocked function can be
identified
* tag 'locking_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add __always_inline annotation to __down_read_common() and inlined callers
Pull perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is flushed before reprogramming the
hardware so that the correct record sizes are used
- Update the sample size for AMD BRS events
- Fix a confusion with using the same on-stack struct with different
events in the event processing path
* tag 'perf_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
perf/x86: Fix missing sample size update on AMD BRS
perf/core: Fix perf_sample_data not properly initialized for different swevents in perf_tp_event()
Pull scheduler fix from Borislav Petkov:
- Fix a couple of kernel-doc warnings
* tag 'sched_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: fix cid_lock kernel-doc warnings
When a tick broadcast clockevent device is initialized for one shot mode
then tick_broadcast_setup_oneshot() OR's the periodic broadcast mode
cpumask into the oneshot broadcast cpumask.
This is required when switching from periodic broadcast mode to oneshot
broadcast mode to ensure that CPUs which are waiting for periodic
broadcast are woken up on the next tick.
But it is subtly broken, when an active broadcast device is replaced and
the system is already in oneshot (NOHZ/HIGHRES) mode. Victor observed
this and debugged the issue.
Then the OR of the periodic broadcast CPU mask is wrong as the periodic
cpumask bits are sticky after tick_broadcast_enable() set it for a CPU
unless explicitly cleared via tick_broadcast_disable().
That means that this sets all other CPUs which have tick broadcasting
enabled at that point unconditionally in the oneshot broadcast mask.
If the affected CPUs were already idle and had their bits set in the
oneshot broadcast mask then this does no harm. But for non idle CPUs
which were not set this corrupts their state.
On their next invocation of tick_broadcast_enable() they observe the bit
set, which indicates that the broadcast for the CPU is already set up.
As a consequence they fail to update the broadcast event even if their
earliest expiring timer is before the actually programmed broadcast
event.
If the programmed broadcast event is far in the future, then this can
cause stalls or trigger the hung task detector.
Avoid this by telling tick_broadcast_setup_oneshot() explicitly whether
this is the initial switch over from periodic to oneshot broadcast which
must take the periodic broadcast mask into account. In the case of
initialization of a replacement device this prevents that the broadcast
oneshot mask is modified.
There is a second problem with broadcast device replacement in this
function. The broadcast device is only armed when the previous state of
the device was periodic.
That is correct for the switch from periodic broadcast mode to oneshot
broadcast mode as the underlying broadcast device could operate in
oneshot state already due to lack of periodic state in hardware. In that
case it is already armed to expire at the next tick.
For the replacement case this is wrong as the device is in shutdown
state. That means that any already pending broadcast event will not be
armed.
This went unnoticed because any CPU which goes idle will observe that
the broadcast device has an expiry time of KTIME_MAX and therefore any
CPUs next timer event will be earlier and cause a reprogramming of the
broadcast device. But that does not guarantee that the events of the
CPUs which were already in idle are delivered on time.
Fix this by arming the newly installed device for an immediate event
which will reevaluate the per CPU expiry times and reprogram the
broadcast device accordingly. This is simpler than caching the last
expiry time in yet another place or saving it before the device exchange
and handing it down to the setup function. Replacement of broadcast
devices is not a frequent operation and usually happens once somewhere
late in the boot process.
Fixes: 9c336c9935 ("tick/broadcast: Allow late registered device to enter oneshot mode")
Reported-by: Victor Hassan <victor@allwinnertech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87pm7d2z1i.ffs@tglx
Fix kernel-doc warnings for cid_lock and use_cid_lock.
These comments are not in kernel-doc format.
kernel/sched/core.c:11496: warning: Cannot understand * @cid_lock: Guarantee forward-progress of cid allocation.
on line 11496 - I thought it was a doc line
kernel/sched/core.c:11505: warning: Cannot understand * @use_cid_lock: Select cid allocation behavior: lock-free vs spinlock.
on line 11505 - I thought it was a doc line
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230428031111.322-1-rdunlap@infradead.org
Apparently despite it being marked inline, the compiler
may not inline __down_read_common() which makes it difficult
to identify the cause of lock contention, as the blocked
function in traceevents will always be listed as
__down_read_common().
So this patch adds __always_inline annotation to the common
function (as well as the inlined helper callers) to force it to
be inlined so the blocking function will be listed (via Wchan)
in traceevents.
Fixes: c995e638cc ("locking/rwsem: Fold __down_{read,write}*()")
Reported-by: Tim Murray <timmurray@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230503023351.2832796-1-jstultz@google.com
Pull more tracing updates from Steven Rostedt:
- Make buffer_percent read/write.
The buffer_percent file is how users can state how long to block on
the tracing buffer depending on how much is in the buffer. When it
hits the "buffer_percent" it will wake the task waiting on the
buffer. For some reason it was set to read-only.
This was not noticed because testing was done as root without
SELinux, but with SELinux it will prevent even root to write to it
without having CAP_DAC_OVERRIDE.
- The "touched_functions" was added this merge window, but one of the
reasons for adding it was not implemented.
That was to show what functions were not only touched, but had either
a direct trampoline attached to it, or a kprobe or live kernel
patching that can "hijack" the function to run a different function.
The point is to know if there's functions in the kernel that may not
be behaving as the kernel code shows. This can be used for debugging.
TODO: Add this information to kernel oops too.
* tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached
tracing: Fix permissions for the buffer_percent file
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
If a function had ever had IPMODIFY or DIRECT attached to it, where this
is how live kernel patching and BPF overrides work, mark them and display
an "M" in the enabled_functions and touched_functions files. This can be
used for debugging. If a function had been modified and later there's a bug
in the code related to that function, this can be used to know if the cause
is possibly from a live kernel patch or a BPF program that changed the
behavior of the code.
Also update the documentation on the enabled_functions and
touched_functions output, as it was missing direct callers and CALL_OPS.
And include this new modify attribute.
Link: https://lore.kernel.org/linux-trace-kernel/20230502213233.004e3ae4@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull hitfixes from Andrew Morton:
"Five hotfixes. Three are cc:stable, two for this -rc cycle"
* tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: change per-VMA lock statistics to be disabled by default
MAINTAINERS: update Michal Simek's email
mm/mempolicy: correctly update prev when policy is equal on mbind
relayfs: fix out-of-bounds access in relay_file_read
kasan: hw_tags: avoid invalid virt_to_page()
Pull more MM updates from Andrew Morton:
- Some DAMON cleanups from Kefeng Wang
- Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE
ioctl's behavior more similar to KSM's behavior.
[ Andrew called these "final", but I suspect we'll have a series fixing
up the fact that the last commit in the dmapools series in the
previous pull seems to have unintentionally just reverted all the
other commits in the same series.. - Linus ]
* tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hwpoison: coredump: support recovery from dump_user_range()
mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page()
mm/ksm: move disabling KSM from s390/gmap code to KSM code
selftests/ksm: ksm_functional_tests: add prctl unmerge test
mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0
mm/damon/paddr: fix missing folio_sz update in damon_pa_young()
mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate()
mm/damon/paddr: minor refactor of damon_pa_pageout()
Pull modules fix from Luis Chamberlain:
"One fix by Arnd far for modules which came in after the first pull
request.
The issue was found as part of some late compile tests with 0-day. I
take it 0-day does some secondary late builds with after some initial
ones"
* tag 'modules-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: include internal.h in module/dups.c
Pull more sysctl updates from Luis Chamberlain:
"As mentioned on my first pull request for sysctl-next, for v6.4-rc1
we're very close to being able to deprecating register_sysctl_paths().
I was going to assess the situation after the first week of the merge
window.
That time is now and things are looking good. We only have one which
had already an ACK for so I'm picking this up here now and the last
patch is the one that uses an axe.
I have boot tested the last patch and 0-day build completed
successfully"
* tag 'sysctl-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove register_sysctl_paths()
kernel: pid_namespace: simplify sysctls with register_sysctl()
Pull more power management updates from Rafael Wysocki:
"These fix a hibernation test mode regression and clean up the
intel_idle driver.
Specifics:
- Make test_resume work again after the changes that made hibernation
open the snapshot device in exclusive mode (Chen Yu)
- Clean up code in several places in intel_idle (Artem Bityutskiy)"
* tag 'pm-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: mark few variables as __read_mostly
intel_idle: do not sprinkle module parameter definitions around
intel_idle: fix confusing message
intel_idle: improve C-state flags handling robustness
intel_idle: further intel_idle_init_cstates_icpu() cleanup
intel_idle: clean up intel_idle_init_cstates_icpu()
intel_idle: use pr_info() instead of printk()
PM: hibernate: Do not get block device exclusively in test_resume mode
PM: hibernate: Turn snapshot_test into global variable
Two newly introduced functions are declared in a header that is not
included before the definition, causing a warning with sparse or
'make W=1':
kernel/module/dups.c:118:6: error: no previous prototype for 'kmod_dup_request_exists_wait' [-Werror=missing-prototypes]
118 | bool kmod_dup_request_exists_wait(char *module_name, bool wait, int *dup_ret)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/module/dups.c:220:6: error: no previous prototype for 'kmod_dup_request_announce' [-Werror=missing-prototypes]
220 | void kmod_dup_request_announce(char *module_name, int ret)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Add an explicit include to ensure the prototypes match.
Fixes: 8660484ed1 ("module: add debugging auto-load duplicate module support")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304141440.DYO4NAzp-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
There is a crash in relay_file_read, as the var from
point to the end of last subbuf.
The oops looks something like:
pc : __arch_copy_to_user+0x180/0x310
lr : relay_file_read+0x20c/0x2c8
Call trace:
__arch_copy_to_user+0x180/0x310
full_proxy_read+0x68/0x98
vfs_read+0xb0/0x1d0
ksys_read+0x6c/0xf0
__arm64_sys_read+0x20/0x28
el0_svc_common.constprop.3+0x84/0x108
do_el0_svc+0x74/0x90
el0_svc+0x1c/0x28
el0_sync_handler+0x88/0xb0
el0_sync+0x148/0x180
We get the condition by analyzing the vmcore:
1). The last produced byte and last consumed byte
both at the end of the last subbuf
2). A softirq calls function(e.g __blk_add_trace)
to write relay buffer occurs when an program is calling
relay_file_read_avail().
relay_file_read
relay_file_read_avail
relay_file_read_consume(buf, 0, 0);
//interrupted by softirq who will write subbuf
....
return 1;
//read_start point to the end of the last subbuf
read_start = relay_file_read_start_pos
//avail is equal to subsize
avail = relay_file_read_subbuf_avail
//from points to an invalid memory address
from = buf->start + read_start
//system is crashed
copy_to_user(buffer, from, avail)
Link: https://lkml.kernel.org/r/20230419040203.37676-1-zhang.zhengming@h3c.com
Fixes: 8d62fdebda ("relay file read: start-pos fix")
Signed-off-by: Zhang Zhengming <zhang.zhengming@h3c.com>
Reviewed-by: Zhao Lei <zhao_lei1@hoperun.com>
Reviewed-by: Zhou Kete <zhou.kete@h3c.com>
Reviewed-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
Pull s390 updates from Vasily Gorbik:
- Add support for stackleak feature. Also allow specifying
architecture-specific stackleak poison function to enable faster
implementation. On s390, the mvc-based implementation helps decrease
typical overhead from a factor of 3 to just 25%
- Convert all assembler files to use SYM* style macros, deprecating the
ENTRY() macro and other annotations. Select ARCH_USE_SYM_ANNOTATIONS
- Improve KASLR to also randomize module and special amode31 code base
load addresses
- Rework decompressor memory tracking to support memory holes and
improve error handling
- Add support for protected virtualization AP binding
- Add support for set_direct_map() calls
- Implement set_memory_rox() and noexec module_alloc()
- Remove obsolete overriding of mem*() functions for KASAN
- Rework kexec/kdump to avoid using nodat_stack to call purgatory
- Convert the rest of the s390 code to use flexible-array member
instead of a zero-length array
- Clean up uaccess inline asm
- Enable ARCH_HAS_MEMBARRIER_SYNC_CORE
- Convert to using CONFIG_FUNCTION_ALIGNMENT and enable
DEBUG_FORCE_FUNCTION_ALIGN_64B
- Resolve last_break in userspace fault reports
- Simplify one-level sysctl registration
- Clean up branch prediction handling
- Rework CPU counter facility to retrieve available counter sets just
once
- Other various small fixes and improvements all over the code
* tag 's390-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (118 commits)
s390/stackleak: provide fast __stackleak_poison() implementation
stackleak: allow to specify arch specific stackleak poison function
s390: select ARCH_USE_SYM_ANNOTATIONS
s390/mm: use VM_FLUSH_RESET_PERMS in module_alloc()
s390: wire up memfd_secret system call
s390/mm: enable ARCH_HAS_SET_DIRECT_MAP
s390/mm: use BIT macro to generate SET_MEMORY bit masks
s390/relocate_kernel: adjust indentation
s390/relocate_kernel: use SYM* macros instead of ENTRY(), etc.
s390/entry: use SYM* macros instead of ENTRY(), etc.
s390/purgatory: use SYM* macros instead of ENTRY(), etc.
s390/kprobes: use SYM* macros instead of ENTRY(), etc.
s390/reipl: use SYM* macros instead of ENTRY(), etc.
s390/head64: use SYM* macros instead of ENTRY(), etc.
s390/earlypgm: use SYM* macros instead of ENTRY(), etc.
s390/mcount: use SYM* macros instead of ENTRY(), etc.
s390/crc32le: use SYM* macros instead of ENTRY(), etc.
s390/crc32be: use SYM* macros instead of ENTRY(), etc.
s390/crypto,chacha: use SYM* macros instead of ENTRY(), etc.
s390/amode31: use SYM* macros instead of ENTRY(), etc.
...
Pull dma-mapping updates from Christoph Hellwig:
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
- clean up the coherency defaul initialiation (Jiaxun Yang)
- add cacheline to user/kernel dma-debug space dump messages (Desnes
Nunes, Geert Uytterhoeve)
- swiotlb statistics improvements (Michael Kelley)
- misc cleanups (Petr Tesarik)
* tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
swiotlb: track and report io_tlb_used high water marks in debugfs
swiotlb: fix debugfs reporting of reserved memory pools
swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
of: address: always use dma_default_coherent for default coherency
dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
dma-mapping: provide a fallback dma_default_coherent
dma-debug: Use %pa to format phys_addr_t
dma-debug: add cacheline to user/kernel space dump messages
dma-debug: small dma_debug_entry's comment and variable name updates
dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask
Pull more timer updates from Thomas Gleixner:
"Timekeeping and clocksource/event driver updates the second batch:
- A trivial documentation fix in the timekeeping core
- A really boring set of small fixes, enhancements and cleanups in
the drivers code. No new clocksource/clockevent drivers for a
change"
* tag 'timers-core-2023-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix references to nonexistent ktime_get_fast_ns()
dt-bindings: timer: rockchip: Add rk3588 compatible
dt-bindings: timer: rockchip: Drop superfluous rk3288 compatible
clocksource/drivers/ti: Use of_property_read_bool() for boolean properties
clocksource/drivers/timer-ti-dm: Fix finding alwon timer
clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails
clocksource/drivers/stm32-lp: Drop of_match_ptr for ID table
clocksource/drivers/timer-ti-dm: Convert to platform remove callback returning void
clocksource/drivers/timer-tegra186: Convert to platform remove callback returning void
clocksource/drivers/timer-ti-dm: Improve error message in .remove
clocksource/drivers/timer-stm32-lp: Mark driver as non-removable
clocksource/drivers/sh_mtu2: Mark driver as non-removable
clocksource/drivers/timer-ti-dm: Use of_address_to_resource()
clocksource/drivers/timer-imx-gpt: Remove non-DT function
clocksource/drivers/timer-mediatek: Split out CPUXGPT timers
clocksource/drivers/exynos_mct: Explicitly return 0 for shared timer
Pull cgroup updates from Tejun Heo:
- cpuset changes including the fix for an incorrect interaction with
CPU hotplug and an optimization
- Other doc and cosmetic changes
* tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1/cpusets: update libcgroup project link
cgroup/cpuset: Minor updates to test_cpuset_prs.sh
cgroup/cpuset: Include offline CPUs when tasks' cpumasks in top_cpuset are updated
cgroup/cpuset: Skip task update if hotplug doesn't affect current cpuset
cpuset: Clean up cpuset_node_allowed
cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers
Pull workqueue updates from Tejun Heo:
"Mostly changes from Petr to improve warning and error reporting.
Workqueue now reports more of the relevant failures with better
context which should help debugging"
* tag 'wq-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Introduce show_freezable_workqueues
workqueue: Print backtraces from CPUs with hung CPU bound workqueues
workqueue: Warn when a rescuer could not be created
workqueue: Interrupted create_worker() is not a repeated event
workqueue: Warn when a new worker could not be created
workqueue: Fix hung time report of worker pools
workqueue: Simplify a pr_warn() call in wq_select_unbound_cpu()
MAINTAINERS: Add workqueue_internal.h to the WORKQUEUE entry
On PREEMPT_RT, rw_semaphore and rwlock_t locks are unfair to writers.
Readers can indefinitely acquire the lock unless the writer fully acquired
the lock, which might never happen if there is always a reader in the
critical section owning the lock.
Mel Gorman reported that since LTP-20220121 the dio_truncate test case
went from having 1 reader to having 16 readers and that number of readers
is sufficient to prevent the down_write ever succeeding while readers
exist. Eventually the test is killed after 30 minutes as a failure.
Mel proposed a timeout to limit how long a writer can be blocked until
the reader is forced into the slowpath.
Thomas argued that there is no added value by providing this timeout. From
a PREEMPT_RT point of view, there are no critical rw_semaphore or rwlock_t
locks left where the reader must be preferred.
Mitigate indefinite writer starvation by forcing the READER into the
slowpath once the WRITER attempts to acquire the lock.
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/877cwbq4cq.ffs@tglx
Link: https://lore.kernel.org/r/20230321161140.HMcQEhHb@linutronix.de
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Pull tracing tools updates from Steven Rostedt:
- Add auto-analysis only option to rtla/timerlat
Add an --aa-only option to the tooling to perform only the auto
analysis and not to parse and format the data.
- Other minor fixes and clean ups
* tag 'trace-tools-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/timerlat: Fix "Previous IRQ" auto analysis' line
rtla/timerlat: Add auto-analysis only option
rv: Remove redundant assignment to variable retval
rv: Fix addition on an uninitialized variable 'run'
rtla: Add .gitignore file
Pull tracing updates from Steven Rostedt:
- User events are finally ready!
After lots of collaboration between various parties, we finally
locked down on a stable interface for user events that can also work
with user space only tracing.
This is implemented by telling the kernel (or user space library, but
that part is user space only and not part of this patch set), where
the variable is that the application uses to know if something is
listening to the trace.
There's also an interface to tell the kernel about these events,
which will show up in the /sys/kernel/tracing/events/user_events/
directory, where it can be enabled.
When it's enabled, the kernel will update the variable, to tell the
application to start writing to the kernel.
See https://lwn.net/Articles/927595/
- Cleaned up the direct trampolines code to simplify arm64 addition of
direct trampolines.
Direct trampolines use the ftrace interface but instead of jumping to
the ftrace trampoline, applications (mostly BPF) can register their
own trampoline for performance reasons.
- Some updates to the fprobe infrastructure. fprobes are more efficient
than kprobes, as it does not need to save all the registers that
kprobes on ftrace do. More work needs to be done before the fprobes
will be exposed as dynamic events.
- More updates to references to the obsolete path of
/sys/kernel/debug/tracing for the new /sys/kernel/tracing path.
- Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer
line by line instead of all at once.
There are users in production kernels that have a large data dump
that originally used printk() directly, but the data dump was larger
than what printk() allowed as a single print.
Using seq_buf() to do the printing fixes that.
- Add /sys/kernel/tracing/touched_functions that shows all functions
that was every traced by ftrace or a direct trampoline. This is used
for debugging issues where a traced function could have caused a
crash by a bpf program or live patching.
- Add a "fields" option that is similar to "raw" but outputs the fields
of the events. It's easier to read by humans.
- Some minor fixes and clean ups.
* tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits)
ring-buffer: Sync IRQ works before buffer destruction
tracing: Add missing spaces in trace_print_hex_seq()
ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
recordmcount: Fix memory leaks in the uwrite function
tracing/user_events: Limit max fault-in attempts
tracing/user_events: Prevent same address and bit per process
tracing/user_events: Ensure bit is cleared on unregister
tracing/user_events: Ensure write index cannot be negative
seq_buf: Add seq_buf_do_printk() helper
tracing: Fix print_fields() for __dyn_loc/__rel_loc
tracing/user_events: Set event filter_type from type
ring-buffer: Clearly check null ptr returned by rb_set_head_page()
tracing: Unbreak user events
tracing/user_events: Use print_format_fields() for trace output
tracing/user_events: Align structs with tabs for readability
tracing/user_events: Limit global user_event count
tracing/user_events: Charge event allocs to cgroups
tracing/user_events: Update documentation for ABI
tracing/user_events: Use write ABI in example
tracing/user_events: Add ABI self-test
...
Pull SMP cross-CPU function-call updates from Ingo Molnar:
- Remove diagnostics and adjust config for CSD lock diagnostics
- Add a generic IPI-sending tracepoint, as currently there's no easy
way to instrument IPI origins: it's arch dependent and for some major
architectures it's not even consistently available.
* tag 'smp-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
trace,smp: Trace all smp_function_call*() invocations
trace: Add trace_ipi_send_cpu()
sched, smp: Trace smp callback causing an IPI
smp: reword smp call IPI comment
treewide: Trace IPIs sent via smp_send_reschedule()
irq_work: Trace self-IPIs sent via arch_irq_work_raise()
smp: Trace IPIs sent via arch_send_call_function_ipi_mask()
sched, smp: Trace IPIs sent via send_call_function_single_ipi()
trace: Add trace_ipi_send_cpumask()
kernel/smp: Make csdlock_debug= resettable
locking/csd_lock: Remove per-CPU data indirection from CSD lock debugging
locking/csd_lock: Remove added data from CSD lock debugging
locking/csd_lock: Add Kconfig option for csd_debug default
Pull scheduler updates from Ingo Molnar:
- Allow unprivileged PSI poll()ing
- Fix performance regression introduced by mm_cid
- Improve livepatch stalls by adding livepatch task switching to
cond_resched(). This resolves livepatching busy-loop stalls with
certain CPU-bound kthreads
- Improve sched_move_task() performance on autogroup configs
- On core-scheduling CPUs, avoid selecting throttled tasks to run
- Misc cleanups, fixes and improvements
* tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Fix local_clock() before sched_clock_init()
sched/rt: Fix bad task migration for rt tasks
sched: Fix performance regression introduced by mm_cid
sched/core: Make sched_dynamic_mutex static
sched/psi: Allow unprivileged polling of N*2s period
sched/psi: Extract update_triggers side effect
sched/psi: Rename existing poll members in preparation
sched/psi: Rearrange polling code in preparation
sched/fair: Fix inaccurate tally of ttwu_move_affine
vhost: Fix livepatch timeouts in vhost_worker()
livepatch,sched: Add livepatch task switching to cond_resched()
livepatch: Skip task_call_func() for current task
livepatch: Convert stack entries array to percpu
sched: Interleave cfs bandwidth timers for improved single thread performance at low utilization
sched/core: Reduce cost of sched_move_task when config autogroup
sched/core: Avoid selecting the task that is throttled to run when core-sched enable
sched/topology: Make sched_energy_mutex,update static
Pull objtool updates from Ingo Molnar:
- Mark arch_cpu_idle_dead() __noreturn, make all architectures &
drivers that did this inconsistently follow this new, common
convention, and fix all the fallout that objtool can now detect
statically
- Fix/improve the ORC unwinder becoming unreliable due to
UNWIND_HINT_EMPTY ambiguity, split it into UNWIND_HINT_END_OF_STACK
and UNWIND_HINT_UNDEFINED to resolve it
- Fix noinstr violations in the KCSAN code and the lkdtm/stackleak code
- Generate ORC data for __pfx code
- Add more __noreturn annotations to various kernel startup/shutdown
and panic functions
- Misc improvements & fixes
* tag 'objtool-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/hyperv: Mark hv_ghcb_terminate() as noreturn
scsi: message: fusion: Mark mpt_halt_firmware() __noreturn
x86/cpu: Mark {hlt,resume}_play_dead() __noreturn
btrfs: Mark btrfs_assertfail() __noreturn
objtool: Include weak functions in global_noreturns check
cpu: Mark nmi_panic_self_stop() __noreturn
cpu: Mark panic_smp_self_stop() __noreturn
arm64/cpu: Mark cpu_park_loop() and friends __noreturn
x86/head: Mark *_start_kernel() __noreturn
init: Mark start_kernel() __noreturn
init: Mark [arch_call_]rest_init() __noreturn
objtool: Generate ORC data for __pfx code
x86/linkage: Fix padding for typed functions
objtool: Separate prefix code from stack validation code
objtool: Remove superfluous dead_end_function() check
objtool: Add symbol iteration helpers
objtool: Add WARN_INSN()
scripts/objdump-func: Support multiple functions
context_tracking: Fix KCSAN noinstr violation
objtool: Add stackleak instrumentation to uaccess safe list
...
Pull non-MM updates from Andrew Morton:
"Mainly singleton patches all over the place.
Series of note are:
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas"
* tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits)
mailmap: add entries for Paul Mackerras
libgcc: add forward declarations for generic library routines
mailmap: add entry for Oleksandr
ocfs2: reduce ioctl stack usage
fs/proc: add Kthread flag to /proc/$pid/status
ia64: fix an addr to taddr in huge_pte_offset()
checkpatch: introduce proper bindings license check
epoll: rename global epmutex
scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
scripts/gdb: create linux/vfs.py for VFS related GDB helpers
uapi/linux/const.h: prefer ISO-friendly __typeof__
delayacct: track delays from IRQ/SOFTIRQ
scripts/gdb: timerlist: convert int chunks to str
scripts/gdb: print interrupts
scripts/gdb: raise error with reduced debugging information
scripts/gdb: add a Radix Tree Parser
lib/rbtree: use '+' instead of '|' for setting color.
proc/stat: remove arch_idle_time()
checkpatch: check for misuse of the link tags
checkpatch: allow Closes tags with links
...
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
Pull hyperv updates from Wei Liu:
- PCI passthrough for Hyper-V confidential VMs (Michael Kelley)
- Hyper-V VTL mode support (Saurabh Sengar)
- Move panic report initialization code earlier (Long Li)
- Various improvements and bug fixes (Dexuan Cui and Michael Kelley)
* tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg
Drivers: hv: move panic report code from vmbus to hv early init code
x86/hyperv: VTL support for Hyper-V
Drivers: hv: Kconfig: Add HYPERV_VTL_MODE
x86/hyperv: Make hv_get_nmi_reason public
x86/hyperv: Add VTL specific structs and hypercalls
x86/init: Make get/set_rtc_noop() public
x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes
x86/hyperv: Add callback filter to cpumask_to_vpset()
Drivers: hv: vmbus: Remove the per-CPU post_msg_page
clocksource: hyper-v: make sure Invariant-TSC is used if it is available
PCI: hv: Enable PCI pass-thru devices in Confidential VMs
Drivers: hv: Don't remap addresses that are above shared_gpa_boundary
hv_netvsc: Remove second mapping of send and recv buffers
Drivers: hv: vmbus: Remove second way of mapping ring buffers
Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages
swiotlb: Remove bounce buffer remapping for Hyper-V
Driver: VMBus: Add Devicetree support
dt-bindings: bus: Add Hyper-V VMBus
Drivers: hv: vmbus: Convert acpi_device to more generic platform_device
...
Pull hardening update from Kees Cook:
- Fix kheaders array declaration to avoid tripping FORTIFY_SOURCE
* tag 'hardening-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kheaders: Use array declaration instead of char
Pull sysctl updates from Luis Chamberlain:
"This only does a few sysctl moves from the kernel/sysctl.c file, the
rest of the work has been put towards deprecating two API calls which
incur recursion and prevent us from simplifying the registration
process / saving memory per move. Most of the changes have been
soaking on linux-next since v6.3-rc3.
I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's
feedback that we should see if we could *save* memory with these moves
instead of incurring more memory. We currently incur more memory since
when we move a syctl from kernel/sysclt.c out to its own file we end
up having to add a new empty sysctl used to register it. To achieve
saving memory we want to allow syctls to be passed without requiring
the end element being empty, and just have our registration process
rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls
would make the sysctl registration pretty brittle, hard to read and
maintain as can be seen from Meng Tang's efforts to do just this [0].
Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations
also implies doing the work to deprecate two API calls which use
recursion in order to support sysctl declarations with subdirectories.
And so during this development cycle quite a bit of effort went into
this deprecation effort. I've annotated the following two APIs are
deprecated and in few kernel releases we should be good to remove
them:
- register_sysctl_table()
- register_sysctl_paths()
During this merge window we should be able to deprecate and unexport
register_sysctl_paths(), we can probably do that towards the end of
this merge window.
Deprecating register_sysctl_table() will take a bit more time but this
pull request goes with a few example of how to do this.
As it turns out each of the conversions to move away from either of
these two API calls *also* saves memory. And so long term, all these
changes *will* prove to have saved a bit of memory on boot.
The way I see it then is if remove a user of one deprecated call, it
gives us enough savings to move one kernel/sysctl.c out from the
generic arrays as we end up with about the same amount of bytes.
Since deprecating register_sysctl_table() and register_sysctl_paths()
does not require maintainer coordination except the final unexport
you'll see quite a bit of these changes from other pull requests, I've
just kept the stragglers after rc3"
Link: https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org [0]
* tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (29 commits)
fs: fix sysctls.c built
mm: compaction: remove incorrect #ifdef checks
mm: compaction: move compaction sysctl to its own file
mm: memory-failure: Move memory failure sysctls to its own file
arm: simplify two-level sysctl registration for ctl_isa_vars
ia64: simplify one-level sysctl registration for kdump_ctl_table
utsname: simplify one-level sysctl registration for uts_kern_table
ntfs: simplfy one-level sysctl registration for ntfs_sysctls
coda: simplify one-level sysctl registration for coda_table
fs/cachefiles: simplify one-level sysctl registration for cachefiles_sysctls
xfs: simplify two-level sysctl registration for xfs_table
nfs: simplify two-level sysctl registration for nfs_cb_sysctls
nfs: simplify two-level sysctl registration for nfs4_cb_sysctls
lockd: simplify two-level sysctl registration for nlm_sysctls
proc_sysctl: enhance documentation
xen: simplify sysctl registration for balloon
md: simplify sysctl registration
hv: simplify sysctl registration
scsi: simplify sysctl registration with register_sysctl()
csky: simplify alignment sysctl registration
...
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
If something was written to the buffer just before destruction,
it may be possible (maybe not in a real system, but it did
happen in ARCH=um with time-travel) to destroy the ringbuffer
before the IRQ work ran, leading this KASAN report (or a crash
without KASAN):
BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a
Read of size 8 at addr 000000006d640a48 by task swapper/0
CPU: 0 PID: 0 Comm: swapper Tainted: G W O 6.3.0-rc1 #7
Stack:
60c4f20f 0c203d48 41b58ab3 60f224fc
600477fa 60f35687 60c4f20f 601273dd
00000008 6101eb00 6101eab0 615be548
Call Trace:
[<60047a58>] show_stack+0x25e/0x282
[<60c609e0>] dump_stack_lvl+0x96/0xfd
[<60c50d4c>] print_report+0x1a7/0x5a8
[<603078d3>] kasan_report+0xc1/0xe9
[<60308950>] __asan_report_load8_noabort+0x1b/0x1d
[<60232844>] irq_work_run_list+0x11a/0x13a
[<602328b4>] irq_work_tick+0x24/0x34
[<6017f9dc>] update_process_times+0x162/0x196
[<6019f335>] tick_sched_handle+0x1a4/0x1c3
[<6019fd9e>] tick_sched_timer+0x79/0x10c
[<601812b9>] __hrtimer_run_queues.constprop.0+0x425/0x695
[<60182913>] hrtimer_interrupt+0x16c/0x2c4
[<600486a3>] um_timer+0x164/0x183
[...]
Allocated by task 411:
save_stack_trace+0x99/0xb5
stack_trace_save+0x81/0x9b
kasan_save_stack+0x2d/0x54
kasan_set_track+0x34/0x3e
kasan_save_alloc_info+0x25/0x28
____kasan_kmalloc+0x8b/0x97
__kasan_kmalloc+0x10/0x12
__kmalloc+0xb2/0xe8
load_elf_phdrs+0xee/0x182
[...]
The buggy address belongs to the object at 000000006d640800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 584 bytes inside of
freed 1024-byte region [000000006d640800, 000000006d640c00)
Add the appropriate irq_work_sync() so the work finishes before
the buffers are destroyed.
Prior to the commit in the Fixes tag below, there was only a
single global IRQ work, so this issue didn't exist.
Link: https://lore.kernel.org/linux-trace-kernel/20230427175920.a76159263122.I8295e405c44362a86c995e9c2c37e3e03810aa56@changeid
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 15693458c4 ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull char/misc drivers updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost
breaks even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
mcb-lpc: Reallocate memory region to avoid memory overlapping
mcb-pci: Reallocate memory region to avoid memory overlapping
mcb: Return actual parsed size when reading chameleon table
kernel/configs: Drop Android config fragments
virt: acrn: Replace obsolete memalign() with posix_memalign()
spmi: Add a check for remove callback when removing a SPMI driver
spmi: fix W=1 kernel-doc warnings
spmi: mtk-pmif: Drop of_match_ptr for ID table
spmi: pmic-arb: Convert to platform remove callback returning void
spmi: mtk-pmif: Convert to platform remove callback returning void
spmi: hisi-spmi-controller: Convert to platform remove callback returning void
w1: gpio: remove unnecessary ENOMEM messages
w1: omap-hdq: remove unnecessary ENOMEM messages
w1: omap-hdq: add SPDX tag
w1: omap-hdq: allow compile testing
w1: matrox: remove unnecessary ENOMEM messages
w1: matrox: use inline over __inline__
w1: matrox: switch from asm to linux header
w1: ds2482: do not use assignment in if condition
w1: ds2482: drop unnecessary header
...
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
The system refused to do a test_resume because it found that the
swap device has already been taken by someone else. Specifically,
the swsusp_check()->blkdev_get_by_dev(FMODE_EXCL) is supposed to
do this check.
Steps to reproduce:
dd if=/dev/zero of=/swapfile bs=$(cat /proc/meminfo |
awk '/MemTotal/ {print $2}') count=1024 conv=notrunc
mkswap /swapfile
swapon /swapfile
swap-offset /swapfile
echo 34816 > /sys/power/resume_offset
echo test_resume > /sys/power/disk
echo disk > /sys/power/state
PM: Using 3 thread(s) for compression
PM: Compressing and saving image data (293150 pages)...
PM: Image saving progress: 0%
PM: Image saving progress: 10%
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
PM: Image saving progress: 20%
PM: Image saving progress: 30%
PM: Image saving progress: 40%
PM: Image saving progress: 50%
pcieport 0000:00:02.5: pciehp: Slot(0-5): No device found
PM: Image saving progress: 60%
PM: Image saving progress: 70%
PM: Image saving progress: 80%
PM: Image saving progress: 90%
PM: Image saving done
PM: hibernation: Wrote 1172600 kbytes in 2.70 seconds (434.29 MB/s)
PM: S|
PM: hibernation: Basic memory bitmaps freed
PM: Image not found (code -16)
This is because when using the swapfile as the hibernation storage,
the block device where the swapfile is located has already been mounted
by the OS distribution(usually mounted as the rootfs). This is not
an issue for normal hibernation, because software_resume()->swsusp_check()
happens before the block device(rootfs) mount. But it is a problem for the
test_resume mode. Because when test_resume happens, the block device has
been mounted already.
Thus remove the FMODE_EXCL for test_resume mode. This would not be a
problem because in test_resume stage, the processes have already been
frozen, and the race condition described in
Commit 39fbef4b0f ("PM: hibernate: Get block device exclusively in swsusp_check()")
is unlikely to happen.
Fixes: 39fbef4b0f ("PM: hibernate: Get block device exclusively in swsusp_check()")
Reported-by: Yifan Li <yifan2.li@intel.com>
Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
