TL;DR:
Prepare to unify how TDX and SME do cache flushing during kexec by
making a percpu boolean control whether to do the WBINVD.
-- Background --
On SME platforms, dirty cacheline aliases with and without encryption
bit can coexist, and the CPU can flush them back to memory in random
order. During kexec, the caches must be flushed before jumping to the
new kernel otherwise the dirty cachelines could silently corrupt the
memory used by the new kernel due to different encryption property.
TDX also needs a cache flush during kexec for the same reason. It would
be good to have a generic way to flush the cache instead of scattering
checks for each feature all around.
When SME is enabled, the kernel basically encrypts all memory including
the kernel itself and a simple memory write from the kernel could dirty
cachelines. Currently, the kernel uses WBINVD to flush the cache for
SME during kexec in two places:
1) the one in stop_this_cpu() for all remote CPUs when the kexec-ing CPU
stops them;
2) the one in the relocate_kernel() where the kexec-ing CPU jumps to the
new kernel.
-- Solution --
Unlike SME, TDX can only dirty cachelines when it is used (i.e., when
SEAMCALLs are performed). Since there are no more SEAMCALLs after the
aforementioned WBINVDs, leverage this for TDX.
To unify the approach for SME and TDX, use a percpu boolean to indicate
the cache may be in an incoherent state and needs flushing during kexec,
and set the boolean for SME. TDX can then leverage it.
While SME could use a global flag (since it's enabled at early boot and
enabled on all CPUs), the percpu flag fits TDX better:
The percpu flag can be set when a CPU makes a SEAMCALL, and cleared when
another WBINVD on the CPU obviates the need for a kexec-time WBINVD.
Saving kexec-time WBINVD is valuable, because there is an existing
race[*] where kexec could proceed while another CPU is active. WBINVD
could make this race worse, so it's worth skipping it when possible.
-- Side effect to SME --
Today the first WBINVD in the stop_this_cpu() is performed when SME is
*supported* by the platform, and the second WBINVD is done in
relocate_kernel() when SME is *activated* by the kernel. Make things
simple by changing to do the second WBINVD when the platform supports
SME. This allows the kernel to simply turn on this percpu boolean when
bringing up a CPU by checking whether the platform supports SME.
No other functional change intended.
[*] The aforementioned race:
During kexec native_stop_other_cpus() is called to stop all remote CPUs
before jumping to the new kernel. native_stop_other_cpus() firstly
sends normal REBOOT vector IPIs to stop remote CPUs and waits them to
stop. If that times out, it sends NMI to stop the CPUs that are still
alive. The race happens when native_stop_other_cpus() has to send NMIs
and could potentially result in the system hang (for more information
please see [1]).
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/kvm/b963fcd60abe26c7ec5dc20b42f1a2ebbcc72397.1750934177.git.kai.huang@intel.com/ [1]
Link: https://lore.kernel.org/all/20250901160930.1785244-3-pbonzini%40redhat.com
The main CPUID header <asm/cpuid.h> was originally a storefront for the
headers:
<asm/cpuid/api.h>
<asm/cpuid/leaf_0x2_api.h>
Now that the latter CPUID(0x2) header has been merged into the former,
there is no practical difference between <asm/cpuid.h> and
<asm/cpuid/api.h>.
Migrate all users to the <asm/cpuid/api.h> header, in preparation of
the removal of <asm/cpuid.h>.
Don't remove <asm/cpuid.h> just yet, in case some new code in -next
started using it.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-3-darwi@linutronix.de
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov reported the following boot crash on x86-32,
with CONFIG_HARDENED_USERCOPY=y:
| usercopy: Kernel memory overwrite attempt detected to SLUB object 'task_struct' (offset 2112, size 160)!
| ...
| kernel BUG at mm/usercopy.c:102!
So the useroffset and usersize arguments are what control the allowed
window of copying in/out of the "task_struct" kmem cache:
/* create a slab on which task_structs can be allocated */
task_struct_whitelist(&useroffset, &usersize);
task_struct_cachep = kmem_cache_create_usercopy("task_struct",
arch_task_struct_size, align,
SLAB_PANIC|SLAB_ACCOUNT,
useroffset, usersize, NULL);
task_struct_whitelist() positions this window based on the location of
the thread_struct within task_struct, and gets the arch-specific details
via arch_thread_struct_whitelist(offset, size):
static void __init task_struct_whitelist(unsigned long *offset, unsigned long *size)
{
/* Fetch thread_struct whitelist for the architecture. */
arch_thread_struct_whitelist(offset, size);
/*
* Handle zero-sized whitelist or empty thread_struct, otherwise
* adjust offset to position of thread_struct in task_struct.
*/
if (unlikely(*size == 0))
*offset = 0;
else
*offset += offsetof(struct task_struct, thread);
}
Commit cb7ca40a38 ("x86/fpu: Make task_struct::thread constant size")
removed the logic for the window, leaving:
static inline void
arch_thread_struct_whitelist(unsigned long *offset, unsigned long *size)
{
*offset = 0;
*size = 0;
}
So now there is no window that usercopy hardening will allow to be copied
in/out of task_struct.
But as reported above, there *is* a copy in copy_uabi_to_xstate(). (It
seems there are several, actually.)
int copy_sigframe_from_user_to_xstate(struct task_struct *tsk,
const void __user *ubuf)
{
return copy_uabi_to_xstate(x86_task_fpu(tsk)->fpstate, NULL, ubuf, &tsk->thread.pkru);
}
This appears to be writing into x86_task_fpu(tsk)->fpstate. With or
without CONFIG_X86_DEBUG_FPU, this resolves to:
((struct fpu *)((void *)(task) + sizeof(*(task))))
i.e. the memory "after task_struct" is cast to "struct fpu", and the
uses the "fpstate" pointer. How that pointer gets set looks to be
variable, but I think the one we care about here is:
fpu->fpstate = &fpu->__fpstate;
And struct fpu::__fpstate says:
struct fpstate __fpstate;
/*
* WARNING: '__fpstate' is dynamically-sized. Do not put
* anything after it here.
*/
So we're still dealing with a dynamically sized thing, even if it's not
within the literal struct task_struct -- it's still in the kmem cache,
though.
Looking at the kmem cache size, it has allocated "arch_task_struct_size"
bytes, which is calculated in fpu__init_task_struct_size():
int task_size = sizeof(struct task_struct);
task_size += sizeof(struct fpu);
/*
* Subtract off the static size of the register state.
* It potentially has a bunch of padding.
*/
task_size -= sizeof(union fpregs_state);
/*
* Add back the dynamically-calculated register state
* size.
*/
task_size += fpu_kernel_cfg.default_size;
/*
* We dynamically size 'struct fpu', so we require that
* 'state' be at the end of 'it:
*/
CHECK_MEMBER_AT_END_OF(struct fpu, __fpstate);
arch_task_struct_size = task_size;
So, this is still copying out of the kmem cache for task_struct, and the
window seems unchanged (still fpu regs). This is what the window was
before:
void fpu_thread_struct_whitelist(unsigned long *offset, unsigned long *size)
{
*offset = offsetof(struct thread_struct, fpu.__fpstate.regs);
*size = fpu_kernel_cfg.default_size;
}
And the same commit I mentioned above removed it.
I think the misunderstanding is here:
| The fpu_thread_struct_whitelist() quirk to hardened usercopy can be removed,
| now that the FPU structure is not embedded in the task struct anymore, which
| reduces text footprint a bit.
Yes, FPU is no longer in task_struct, but it IS in the kmem cache named
"task_struct", since the fpstate is still being allocated there.
Partially revert the earlier mentioned commit, along with a
recalculation of the fpstate regs location.
Fixes: cb7ca40a38 ("x86/fpu: Make task_struct::thread constant size")
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/all/20250409211127.3544993-1-mingo@kernel.org/ # Discussion #1
Link: https://lore.kernel.org/r/202505041418.F47130C4C8@keescook # Discussion #2
Turn thread.fpu into a pointer. Since most FPU code internals work by passing
around the FPU pointer already, the code generation impact is small.
This allows us to remove the old kludge of task_struct being variable size:
struct task_struct {
...
/*
* New fields for task_struct should be added above here, so that
* they are included in the randomized portion of task_struct.
*/
randomized_struct_fields_end
/* CPU-specific state of this task: */
struct thread_struct thread;
/*
* WARNING: on x86, 'thread_struct' contains a variable-sized
* structure. It *MUST* be at the end of 'task_struct'.
*
* Do not put anything below here!
*/
};
... which creates a number of problems, such as requiring thread_struct to be
the last member of the struct - not allowing it to be struct-randomized, etc.
But the primary motivation is to allow the decoupling of task_struct from
hardware details (<asm/processor.h> in particular), and to eventually allow
the per-task infrastructure:
DECLARE_PER_TASK(type, name);
...
per_task(current, name) = val;
... which requires task_struct to be a constant size struct.
The fpu_thread_struct_whitelist() quirk to hardened usercopy can be removed,
now that the FPU structure is not embedded in the task struct anymore, which
reduces text footprint a bit.
Fixed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-4-mingo@kernel.org
Pull x86 speculation mitigation updates from Borislav Petkov:
- Some preparatory work to convert the mitigations machinery to
mitigating attack vectors instead of single vulnerabilities
- Untangle and remove a now unneeded X86_FEATURE_USE_IBPB flag
- Add support for a Zen5-specific SRSO mitigation
- Cleanups and minor improvements
* tag 'x86_bugs_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2
x86/bugs: Use the cpu_smt_possible() helper instead of open-coded code
x86/bugs: Add AUTO mitigations for mds/taa/mmio/rfds
x86/bugs: Relocate mds/taa/mmio/rfds defines
x86/bugs: Add X86_BUG_SPECTRE_V2_USER
x86/bugs: Remove X86_FEATURE_USE_IBPB
KVM: nVMX: Always use IBPB to properly virtualize IBRS
x86/bugs: Use a static branch to guard IBPB on vCPU switch
x86/bugs: Remove the X86_FEATURE_USE_IBPB check in ib_prctl_set()
x86/mm: Remove X86_FEATURE_USE_IBPB checks in cond_mitigation()
x86/bugs: Move the X86_FEATURE_USE_IBPB check into callers
x86/bugs: KVM: Add support for SRSO_MSR_FIX
smp_store_cpu_info() is just a wrapper around identify_secondary_cpu()
without further value.
Move the extra bits from smp_store_cpu_info() into identify_secondary_cpu()
and remove the wrapper.
[ darwi: Make it compile and fix up the xen/smp_pv.c instance ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-9-darwi@linutronix.de
Commit:
e0ba94f14f ("x86/tlb_info: get last level TLB entry number of CPU")
introduced u16 "info" arrays for each TLB type.
Since 2012 and each array stores just one type of information: the
number of TLB entries for its respective TLB type.
Replace such arrays with simple variables.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-8-darwi@linutronix.de
Add AUTO mitigations for mds/taa/mmio/rfds to create consistent vulnerability
handling. These AUTO mitigations will be turned into the appropriate default
mitigations in the <vuln>_select_mitigation() functions. Later, these will be
used with the new attack vector controls to help select appropriate
mitigations.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250108202515.385902-4-david.kaplan@amd.com
The percpu section is currently linked at absolute address 0, because
older compilers hard-coded the stack protector canary value at a fixed
offset from the start of the GS segment. Now that the canary is a
normal percpu variable, the percpu section does not need to be linked
at a specific address.
x86-64 will now calculate the percpu offsets as the delta between the
initial percpu address and the dynamically allocated memory, like other
architectures. Note that GSBASE is limited to the canonical address
width (48 or 57 bits, sign-extended). As long as the kernel text,
modules, and the dynamically allocated percpu memory are all in the
negative address space, the delta will not overflow this limit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-9-brgerst@gmail.com
Older versions of GCC fixed the location of the stack protector canary
at %gs:40. This constraint forced the percpu section to be linked at
absolute address 0 so that the canary could be the first data object in
the percpu section. Supporting the zero-based percpu section requires
additional code to handle relocations for RIP-relative references to
percpu data, extra complexity to kallsyms, and workarounds for linker
bugs due to the use of absolute symbols.
GCC 8.1 supports redefining where the canary is located, allowing it to
become a normal percpu variable instead of at a fixed location. This
removes the constraint that the percpu section must be zero-based.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-8-brgerst@gmail.com
Pull performance events updates from Ingo Molnar:
"Seqlock optimizations that arose in a perf context and were merged
into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount (Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren
Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages in advance
(Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin
Cui)
- Export perf_exclude_event() (Namhyung Kim)
Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids"
* tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
perf: map pages in advance
perf/x86/intel/uncore: Support more units on Granite Rapids
perf/x86/intel/uncore: Clean up func_id
perf/x86/intel: Support RDPMC metrics clear mode
uprobes: Guard against kmemdup() failing in dup_return_instance()
perf/x86: Relax privilege filter restriction on AMD IBS
perf/core: Export perf_exclude_event()
uprobes: Reuse return_instances between multiple uretprobes within task
uprobes: Ensure return_instance is detached from the list before freeing
uprobes: Decouple return_instance list traversal and freeing
uprobes: Simplify session consumer tracking
uprobes: add speculative lockless VMA-to-inode-to-uprobe resolution
uprobes: simplify find_active_uprobe_rcu() VMA checks
mm: introduce mmap_lock_speculate_{try_begin|retry}
mm: convert mm_lock_seq to a proper seqcount
mm/gup: Use raw_seqcount_try_begin()
seqlock: add raw_seqcount_try_begin
perf/x86/rapl: Add core energy counter support for AMD CPUs
perf/x86/rapl: Move the cntr_mask to rapl_pmus struct
perf/x86/rapl: Remove the global variable rapl_msrs
...
In order to be able to differentiate between AMD and Intel based
systems for very early hypercalls without having to rely on the Xen
hypercall page, make get_cpu_vendor() non-static.
Refactor early_cpu_init() for the same reason by splitting out the
loop initializing cpu_devs() into an externally callable function.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Sometimes it is required to take actions based on if a CPU is a performance or
efficiency core. As an example, intel_pstate driver uses the Intel core-type
to determine CPU scaling. Also, some CPU vulnerabilities only affect
a specific CPU type, like RFDS only affects Intel Atom. Hybrid systems that
have variants P+E, P-only(Core) and E-only(Atom), it is not straightforward to
identify which variant is affected by a type specific vulnerability.
Such processors do have CPUID field that can uniquely identify them. Like,
P+E, P-only and E-only enumerates CPUID.1A.CORE_TYPE identification, while P+E
additionally enumerates CPUID.7.HYBRID. Based on this information, it is
possible for boot CPU to identify if a system has mixed CPU types.
Add a new field hw_cpu_type to struct cpuinfo_topology that stores the
hardware specific CPU type. This saves the overhead of IPIs to get the CPU
type of a different CPU. CPU type is populated early in the boot process,
before vulnerabilities are enumerated.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241025171459.1093-5-mario.limonciello@amd.com
Pull x86 FRED updates from Thomas Gleixner:
- Enable FRED right after init_mem_mapping() because at that point the
early IDT fault handler is replaced by the real fault handler. The
real fault handler retrieves the faulting address from the stack
frame and not from CR2 when the FRED feature is set. But that
obviously only works when FRED is enabled in the CPU as well.
- Set SS to __KERNEL_DS when enabling FRED to prevent a corner case
where ERETS can observe a SS mismatch and raises a #GP.
* tag 'x86-fred-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Set FRED RSP0 on return to userspace instead of context switch
x86/msr: Switch between WRMSRNS and WRMSR with the alternatives mechanism
x86/entry: Test ti_work for zero before processing individual bits
x86/fred: Set SS to __KERNEL_DS when enabling FRED
x86/fred: Enable FRED right after init_mem_mapping()
x86/fred: Move FRED RSP initialization into a separate function
x86/fred: Parse cmdline param "fred=" in cpu_parse_early_param()
The function name is ambiguous because it returns an intermediate value
for calculating maximum frequency rather than the CPPC 'Highest Perf'
register.
Rename the function to clarify its use and allow the function to return
errors. Adjust the consumer in acpi-cpufreq to catch errors.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
On 64-bit init_mem_mapping() relies on the minimal page fault handler
provided by the early IDT mechanism. The real page fault handler is
installed right afterwards into the IDT.
This is problematic on CPUs which have X86_FEATURE_FRED set because the
real page fault handler retrieves the faulting address from the FRED
exception stack frame and not from CR2, but that does obviously not work
when FRED is not yet enabled in the CPU.
To prevent this enable FRED right after init_mem_mapping() without
interrupt stacks. Those are enabled later in trap_init() after the CPU
entry area is set up.
[ tglx: Encapsulate the FRED details ]
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Reported-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240709154048.3543361-4-xin@zytor.com
The routine is used on syscall exit and on non-AMD CPUs is guaranteed to
be empty.
It probably does not need to be a function call even on CPUs which do need the
mitigation.
[ bp: Make sure it is always inlined so that noinstr marking works. ]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240613082637.659133-1-mjguzik@gmail.com
Pull x86 cpu updates from Ingo Molnar:
- Rework the x86 CPU vendor/family/model code: introduce the 'VFM'
value that is an 8+8+8 bit concatenation of the vendor/family/model
value, and add macros that work on VFM values. This simplifies the
addition of new Intel models & families, and simplifies existing
enumeration & quirk code.
- Add support for the AMD 0x80000026 leaf, to better parse topology
information
- Optimize the NUMA allocation layout of more per-CPU data structures
- Improve the workaround for AMD erratum 1386
- Clear TME from /proc/cpuinfo as well, when disabled by the firmware
- Improve x86 self-tests
- Extend the mce_record tracepoint with the ::ppin and ::microcode fields
- Implement recovery for MCE errors in TDX/SEAM non-root mode
- Misc cleanups and fixes
* tag 'x86-cpu-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
x86/mm: Switch to new Intel CPU model defines
x86/tsc_msr: Switch to new Intel CPU model defines
x86/tsc: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
x86/resctrl: Switch to new Intel CPU model defines
x86/microcode/intel: Switch to new Intel CPU model defines
x86/mce: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
x86/cpu/intel_epb: Switch to new Intel CPU model defines
x86/aperfmperf: Switch to new Intel CPU model defines
x86/apic: Switch to new Intel CPU model defines
perf/x86/msr: Switch to new Intel CPU model defines
perf/x86/intel/uncore: Switch to new Intel CPU model defines
perf/x86/intel/pt: Switch to new Intel CPU model defines
perf/x86/lbr: Switch to new Intel CPU model defines
perf/x86/intel/cstate: Switch to new Intel CPU model defines
x86/bugs: Switch to new Intel CPU model defines
x86/bugs: Switch to new Intel CPU model defines
x86/cpu/vfm: Update arch/x86/include/asm/intel-family.h
x86/cpu/vfm: Add new macros to work with (vendor/family/model) values
...
Pull x86 boot updates from Ingo Molnar:
- Move the kernel cmdline setup earlier in the boot process (again),
to address a split_lock_detect= boot parameter bug
- Ignore relocations in .notes sections
- Simplify boot stack setup
- Re-introduce a bootloader quirk wrt CR4 handling
- Miscellaneous cleanups & fixes
* tag 'x86-boot-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Clear most of CR4 in startup_64(), except PAE, MCE and LA57
x86/boot: Move kernel cmdline setup earlier in the boot process (again)
x86/build: Clean up arch/x86/tools/relocs.c a bit
x86/boot: Ignore relocations in .notes sections in walk_relocs() too
x86: Rename __{start,end}_init_task to __{start,end}_init_stack
x86/boot: Simplify boot stack setup
Pull x86 asm updates from Ingo Molnar:
- Clean up & fix asm() operand modifiers & constraints
- Misc cleanups
* tag 'x86-asm-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Remove a superfluous newline in _static_cpu_has()
x86/asm/64: Clean up memset16(), memset32(), memset64() assembly constraints in <asm/string_64.h>
x86/asm: Use "m" operand constraint in WRUSSQ asm template
x86/asm: Use %a instead of %P operand modifier in asm templates
x86/asm: Use %c/%n instead of %P operand modifier in asm templates
x86/asm: Remove %P operand modifier from altinstr asm templates
The syzbot-reported stack trace from hell in this discussion thread
actually has three nested page faults:
https://lore.kernel.org/r/000000000000d5f4fc0616e816d4@google.com
... and I think that's actually the important thing here:
- the first page fault is from user space, and triggers the vsyscall
emulation.
- the second page fault is from __do_sys_gettimeofday(), and that should
just have caused the exception that then sets the return value to
-EFAULT
- the third nested page fault is due to _raw_spin_unlock_irqrestore() ->
preempt_schedule() -> trace_sched_switch(), which then causes a BPF
trace program to run, which does that bpf_probe_read_compat(), which
causes that page fault under pagefault_disable().
It's quite the nasty backtrace, and there's a lot going on.
The problem is literally the vsyscall emulation, which sets
current->thread.sig_on_uaccess_err = 1;
and that causes the fixup_exception() code to send the signal *despite* the
exception being caught.
And I think that is in fact completely bogus. It's completely bogus
exactly because it sends that signal even when it *shouldn't* be sent -
like for the BPF user mode trace gathering.
In other words, I think the whole "sig_on_uaccess_err" thing is entirely
broken, because it makes any nested page-faults do all the wrong things.
Now, arguably, I don't think anybody should enable vsyscall emulation any
more, but this test case clearly does.
I think we should just make the "send SIGSEGV" be something that the
vsyscall emulation does on its own, not this broken per-thread state for
something that isn't actually per thread.
The x86 page fault code actually tried to deal with the "incorrect nesting"
by having that:
if (in_interrupt())
return;
which ignores the sig_on_uaccess_err case when it happens in interrupts,
but as shown by this example, these nested page faults do not need to be
about interrupts at all.
IOW, I think the only right thing is to remove that horrendously broken
code.
The attached patch looks like the ObviouslyCorrect(tm) thing to do.
NOTE! This broken code goes back to this commit in 2011:
4fc3490114 ("x86-64: Set siginfo and context on vsyscall emulation faults")
... and back then the reason was to get all the siginfo details right.
Honestly, I do not for a moment believe that it's worth getting the siginfo
details right here, but part of the commit says:
This fixes issues with UML when vsyscall=emulate.
... and so my patch to remove this garbage will probably break UML in this
situation.
I do not believe that anybody should be running with vsyscall=emulate in
2024 in the first place, much less if you are doing things like UML. But
let's see if somebody screams.
Reported-and-tested-by: syzbot+83e7f982ca045ab4405c@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh9D6f7HUkDgZHKmDCHUQmp+Co89GP+b8+z+G56BKeyNg@mail.gmail.com
Refactor struct cpuinfo_x86 so that the vendor, family, and model
fields are overlaid in a union with a 32-bit field that combines
all three (together with a one byte reserved field in the upper
byte).
This will make it easy, cheap, and reliable to check all three
values at once.
See
https://lore.kernel.org/r/Zgr6kT8oULbnmEXx@agluck-desk3
for why the ordering is (low-to-high bits):
(vendor, family, model)
[ bp: Move comments over the line, add the backstory about the
particular order of the fields. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416211941.9369-2-tony.luck@intel.com
The "P" asm operand modifier is a x86 target-specific modifier.
For x86_64, when used with a symbol reference, the "%P" modifier
emits "sym" instead of "sym(%rip)". This property is currently
used to prevent %RIP-relative addressing in .altinstr sections.
%RIP-relative addresses are nowadays correctly handled in .altinstr
sections, so remove %P operand modifier from altinstr asm templates.
Also note that unlike GCC, clang emits %rip-relative symbol
reference with "P" asm operand modifier, so the patch also unifies
symbol handling with both compilers.
No functional changes intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20240319104418.284519-2-ubizjak@gmail.com
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups, including a large series from Thomas Gleixner to cure
sparse warnings"
* tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Drop unused declaration of proc_nmi_enabled()
x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables
x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation
x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current
x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address()
x86/percpu: Cure per CPU madness on UP
smp: Consolidate smp_prepare_boot_cpu()
x86/msr: Add missing __percpu annotations
x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h>
perf/x86/amd/uncore: Fix __percpu annotation
x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP)
x86/apm_32: Remove dead function apm_get_battery_status()
x86/insn-eval: Fix function param name in get_eff_addr_sib()
Pull x86 FRED support from Thomas Gleixner:
"Support for x86 Fast Return and Event Delivery (FRED).
FRED is a replacement for IDT event delivery on x86 and addresses most
of the technical nightmares which IDT exposes:
1) Exception cause registers like CR2 need to be manually preserved
in nested exception scenarios.
2) Hardware interrupt stack switching is suboptimal for nested
exceptions as the interrupt stack mechanism rewinds the stack on
each entry which requires a massive effort in the low level entry
of #NMI code to handle this.
3) No hardware distinction between entry from kernel or from user
which makes establishing kernel context more complex than it needs
to be especially for unconditionally nestable exceptions like NMI.
4) NMI nesting caused by IRET unconditionally reenabling NMIs, which
is a problem when the perf NMI takes a fault when collecting a
stack trace.
5) Partial restore of ESP when returning to a 16-bit segment
6) Limitation of the vector space which can cause vector exhaustion
on large systems.
7) Inability to differentiate NMI sources
FRED addresses these shortcomings by:
1) An extended exception stack frame which the CPU uses to save
exception cause registers. This ensures that the meta information
for each exception is preserved on stack and avoids the extra
complexity of preserving it in software.
2) Hardware interrupt stack switching is non-rewinding if a nested
exception uses the currently interrupt stack.
3) The entry points for kernel and user context are separate and GS
BASE handling which is required to establish kernel context for
per CPU variable access is done in hardware.
4) NMIs are now nesting protected. They are only reenabled on the
return from NMI.
5) FRED guarantees full restore of ESP
6) FRED does not put a limitation on the vector space by design
because it uses a central entry points for kernel and user space
and the CPUstores the entry type (exception, trap, interrupt,
syscall) on the entry stack along with the vector number. The
entry code has to demultiplex this information, but this removes
the vector space restriction.
The first hardware implementations will still have the current
restricted vector space because lifting this limitation requires
further changes to the local APIC.
7) FRED stores the vector number and meta information on stack which
allows having more than one NMI vector in future hardware when the
required local APIC changes are in place.
The series implements the initial FRED support by:
- Reworking the existing entry and IDT handling infrastructure to
accomodate for the alternative entry mechanism.
- Expanding the stack frame to accomodate for the extra 16 bytes FRED
requires to store context and meta information
- Providing FRED specific C entry points for events which have
information pushed to the extended stack frame, e.g. #PF and #DB.
- Providing FRED specific C entry points for #NMI and #MCE
- Implementing the FRED specific ASM entry points and the C code to
demultiplex the events
- Providing detection and initialization mechanisms and the necessary
tweaks in context switching, GS BASE handling etc.
The FRED integration aims for maximum code reuse vs the existing IDT
implementation to the extent possible and the deviation in hot paths
like context switching are handled with alternatives to minimalize the
impact. The low level entry and exit paths are seperate due to the
extended stack frame and the hardware based GS BASE swichting and
therefore have no impact on IDT based systems.
It has been extensively tested on existing systems and on the FRED
simulation and as of now there are no outstanding problems"
* tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/fred: Fix init_task thread stack pointer initialization
MAINTAINERS: Add a maintainer entry for FRED
x86/fred: Fix a build warning with allmodconfig due to 'inline' failing to inline properly
x86/fred: Invoke FRED initialization code to enable FRED
x86/fred: Add FRED initialization functions
x86/syscall: Split IDT syscall setup code into idt_syscall_init()
KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling
x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI
x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code
x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user
x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled
x86/traps: Add sysvec_install() to install a system interrupt handler
x86/fred: FRED entry/exit and dispatch code
x86/fred: Add a machine check entry stub for FRED
x86/fred: Add a NMI entry stub for FRED
x86/fred: Add a debug fault entry stub for FRED
x86/idtentry: Incorporate definitions/declarations of the FRED entries
x86/fred: Make exc_page_fault() work for FRED
x86/fred: Allow single-step trap and NMI when starting a new task
x86/fred: No ESPFIX needed when FRED is enabled
...
As TOP_OF_KERNEL_STACK_PADDING was defined as 0 on x86_64, it went
unnoticed that the initialization of the .sp field in INIT_THREAD and some
calculations in the low level startup code do not take the padding into
account.
FRED enabled kernels require a 16 byte padding, which means that the init
task initialization and the low level startup code use the wrong stack
offset.
Subtract TOP_OF_KERNEL_STACK_PADDING in all affected places to adjust for
this.
Fixes: 65c9cc9e2c ("x86/fred: Reserve space for the FRED stack frame")
Fixes: 3adee777ad ("x86/smpboot: Remove initial_stack on 64-bit")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/oe-lkp/202402262159.183c2a37-lkp@intel.com
Link: https://lore.kernel.org/r/20240304083333.449322-1-xin@zytor.com
The idle routine selection is done on every CPU bringup operation and
has a guard in place which is effective after the first invocation,
which is a pointless exercise.
Invoke it once on the boot CPU and mark the related functions __init.
The guard check has to stay as xen_set_default_idle() runs early.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/87edcu6vaq.ffs@tglx
On UP builds Sparse complains rightfully about accesses to cpu_info with
per CPU accessors:
cacheinfo.c:282:30: sparse: warning: incorrect type in initializer (different address spaces)
cacheinfo.c:282:30: sparse: expected void const [noderef] __percpu *__vpp_verify
cacheinfo.c:282:30: sparse: got unsigned int *
The reason is that on UP builds cpu_info which is a per CPU variable on SMP
is mapped to boot_cpu_info which is a regular variable. There is a hideous
accessor cpu_data() which tries to hide this, but it's not sufficient as
some places require raw accessors and generates worse code than the regular
per CPU accessors.
Waste sizeof(struct x86_cpuinfo) memory on UP and provide the per CPU
cpu_info unconditionally. This requires to update the CPU info on the boot
CPU as SMP does. (Ab)use the weakly defined smp_prepare_boot_cpu() function
and implement exactly that.
This allows to use regular per CPU accessors uncoditionally and paves the
way to remove the cpu_data() hackery.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.622511517@linutronix.de
Sparse rightfully complains about using a plain pointer for per CPU
accessors:
msr-smp.c:15:23: sparse: warning: incorrect type in initializer (different address spaces)
msr-smp.c:15:23: sparse: expected void const [noderef] __percpu *__vpp_verify
msr-smp.c:15:23: sparse: got struct msr *
Add __percpu annotations to the related datastructure and function
arguments to cure this. This also cures the related sparse warnings at the
callsites in drivers/edac/amd64_edac.c.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.513181735@linutronix.de
To clean up the per CPU insanity of UP which causes sparse to be rightfully
unhappy and prevents the usage of the generic per CPU accessors on cpu_info
it is necessary to include <linux/percpu.h> into <asm/msr.h>.
Including <linux/percpu.h> into <asm/msr.h> is impossible because it ends
up in header dependency hell. The problem is that <asm/processor.h>
includes <asm/msr.h>. The inclusion of <linux/percpu.h> results in a
compile fail where the compiler cannot longer handle an include in
<asm/cpufeature.h> which references boot_cpu_data which is
defined in <asm/processor.h>.
The only reason why <asm/msr.h> is included in <asm/processor.h> are the
set/get_debugctlmsr() inlines. They are defined there because <asm/processor.h>
is such a nice dump ground for everything. In fact they belong obviously
into <asm/debugreg.h>.
Move them to <asm/debugreg.h> and fix up the resulting damage which is just
exposing the reliance on random include chains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.454678686@linutronix.de
AMD (ab)uses topology_die_id() to store the Node ID information and
topology_max_dies_per_pkg to store the number of nodes per package.
This collides with the proper processor die level enumeration which is
coming on AMD with CPUID 8000_0026, unless there is a correlation between
the two. There is zero documentation about that.
So provide new storage and new accessors which for now still access die_id
and topology_max_die_per_pkg(). Will be mopped up after AMD and HYGON are
converted over.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.956116738@linutronix.de
