Unify the handling of the per device reset properties for
`mdio_device`.
Merge mdio_device_register_gpiod() and mdio_device_register_reset()
into mdio_device_register_reset(), that handles both
reset-controllers and reset-gpios.
Move reading of the reset firmware properties (reset-assert-us,
reset-deassert-us) from fwnode_mdio.c to mdio_device_register_reset(),
so all reset related initialization code is kept in one place.
Introduce mdio_device_unregister_reset() to release the associated
resources.
These changes make tracking the reset properties easier.
Added kernel-doc for mdio_device_register/unregister_reset().
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/17c216efd7a47be17db104378b6aacfc8741d8b9.1763473655.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The functions mdiobus_register_gpiod() and mdiobus_register_reset()
handle the mdio device reset initialization, which belong to
mdio_device.c.
Move them from mdio_bus.c to mdio_device.c, and rename them to match
the corresponding source file: mdio_device_register_gpio() and
mdio_device_register_reset().
Remove 'static' qualifiers and declare them in
drivers/net/phy/mdio-private.h (new header file).
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/5f684838ee897130f21b21beb07695eea4af8988.1763473655.git.buday.csaba@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346 ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit
bc0c3405ab ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
Fixes: 760c295e0e ("be2net: Support for OS2BMC.")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20251119105015.194501-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use xsk_pool inside rx_chn to check if a given Rx queue id
is registered for xsk zero copy, which gets populated during
xsk enable.
Update prueth_create_xdp_rxqs to register and support two different
memory models (xsk and page) for a given Rx queue, if registered for
zero copy.
If xsk_pool is registered, allocate buffers from UMEM and map them
to the hardware Rx descriptors. In NAPI context, run the XDP program
for each packet and process the xsk buffer according to the XDP
result codes. Also allocate new set of buffers from UMEM for the
next batch of NAPI Rx processing. Add XDK_WAKEUP_RX support to support
xsk wakeup for Rx.
Move prueth_create_page_pool to prueth_init_rx_chns to avoid freeing
and re-allocating the system memory every time there is a transition
from zero copy to copy and prevents any type of memory fragmentation
or leak.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-6-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
emac_run_xdp function runs xdp program, at a given hook point
in the Rx path of the driver in NAPI context and returns
XDP return codes. In zero copy mode the driver receives
packets using UMEM frames instead of pages (native XDP).
Decouple the usage of page in this function.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-5-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use xsk_pool inside tx_chn to check if a given Tx queue id
is registered for xsk zero copy, which gets populated during
xsk enable
If xsk_pool is set, get frames from the pool in NAPI
context and submit them to the Tx channel. Tx completion
is also handled in the NAPI context.
Use PRUETH_SWDATA_XSK to recycle xsk buffers back to the
umem pool. Add XDP_WAKEUP_TX support to enable xsk_wakeup
for Tx.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement XSK NDOs (setup, wakeup) and create XSK
Rx and Tx queues. xsk_qid stores the queue id for
a given port which has been registered for zero copy
AF_XDP and used to acquire UMEM pointer if registered.
Based on the xsk_qid and the xsk_pool (umem) the driver
is either in copy or zero copy mode. In case of copy mode
the xsk_qid value will be invalid and will be set to valid
queue id when enabling zero copy. To enable zero copy, the
Rx queues are destroyed, i.e., descriptors pushed to fq
and cq are freed to remap them to xdp buffers from the umem.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Each port for a given ICSSG instance has their own set of
Tx and Rx queues. Add functions to create and destroy these
queues, which will be further used while performing ndo_bpf
operations to set up XSK Tx/Rx queues for a given port.
In the destroy Rx queue sequence add teardown wait to ensure
that all the descriptors including the TDCM (teardown completion
marker) have been serviced and freed to avoid any sort of descriptor
leaks.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20251118135542.380574-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For QSFP modules, there is a possibility that the module cannot be
identified when read I2C immediately in .ndo_open. So just set the flag
WX_FLAG_NEED_MODULE_RESET and do it in the subtask, which always wait
200 ms to identify the module. And this change has no impact on the
original adaptation.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-5-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
QSFP supported will be introduced for AML 40G devices, the code related
to identify various modules should be renamed to more appropriate names.
And struct txgbe_hic_i2c_read used to get module information is renamed
as struct txgbe_hic_get_module_info, because another SW-FW command to
read I2C will be added later.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20251118080259.24676-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Correct RGMII delay application logic in lan937x_set_tune_adj().
The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the
new delay value. This caused the new value to be bitwise-OR'd with the
existing PORT_TUNE_ADJ field instead of replacing it.
For example, when setting the RGMII 2 TX delay on port 4, the
intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was
incorrectly OR'd with the default 0x1B (from register value 0xDA3),
leaving the delay at the wrong setting.
This patch adds the missing mask to clear the field, ensuring the
correct delay value is written. Physical measurements on the RGMII TX
lines confirm the fix, showing the delay changing from ~1ns (before
change) to ~2ns.
While testing on i.MX 8MP showed this was within the platform's timing
tolerance, it did not match the intended hardware-characterized value.
Fixes: b19ac41faa ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251114090951.4057261-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This completes the previous patches by moving notifier registration for
SF dev tables outside the devlink locked critical section in
mlx5_init_one() / mlx5_uninit_one() and into the mlx5_mdev_init() /
mlx5_mdev_uninit() functions.
This is only done for non-SFs, since SFs do not have a SF HW table
themselves.
After this patch, notifiers can grab the PF devlink lock (soon to be
necessary) without creating a locking cycle.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The vhca event notifier consists of an atomic notifier for vhca state
changes (used for SF events), multiple workqueues and a blocking
notifier chain for delivering the vhca state change events for further
processing.
This patch moves the vhca notifier head outside of mlx5_init_one() /
mlx5_uninit_one() and into the mlx5_mdev_init() / mlx5_mdev_uninit()
functions.
This allows called notifiers to grab the PF devlink lock which was
previously impossible because it would create a circular lock
dependency.
mlx5_vhca_event_stop() is now called earlier in the cleanup phase and
flushes the workqueues to ensure that after the call, there are no
pending events. This simplifies the cleanup flow for vhca event
consumers.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The esw mode change notifier chain is initialized/cleaned up in
mlx5_init_one() / mlx5_uninit_one() with the devlink lock held.
Move the notifier head from the eswitch struct into mlx5_priv directly,
and initialize it outside the critical section. This will allow notifier
registration to happen earlier in the init procedure in subsequent
patches.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move event init/cleanup outside of mlx5_init_one() / mlx5_uninit_one()
and into the mlx5_mdev_init() / mlx5_mdev_uninit() functions.
By doing this, we avoid the events being reinitialized on devlink reload
and, more importantly, the events->sw_nh notifier chain becomes
available earlier in the init procedure, which will be used in
subsequent patches. This makes sense because the events struct is pure
software, independent of any HW details.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To simplify the rtl8211f_config_init() control flow and get rid of
"early" returns for PHYs where the PHYCR2 register is absent, move the
entire logic sub-block that deals with disabling PHY-mode EEE to a
separate function. There, it is much more obvious what the early
"return 0" skips, and it becomes more difficult to accidentally skip
unintended stuff.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251117234033.345679-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous changes have replaced the machine-level priv->phycr2 with a
high-level priv->disable_clk_out. This created a discrepancy with
priv->phycr1 which is resolved here, for uniformity.
One advantage of this new implementation is that we don't read
priv->phycr1 in rtl821x_probe() if we're never going to modify it.
We never test the positive return code from phy_modify_mmd_changed(), so
we could just as well use phy_modify_mmd().
I took the ALDPS feature description from commit d90db36a9e ("net:
phy: realtek: add dt property to enable ALDPS mode") and transformed it
into a function comment - the feature is sufficiently non-obvious to
deserve that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add CLKOUT disable support for RTL8211F(D)(I)-VD-CG. Like with other PHY
variants, this feature might be requested by customers when the clock
output is not used, in order to reduce electromagnetic interference (EMI).
In the common driver, the CLKOUT configuration is done through PHYCR2.
The RTL_8211FVD_PHYID is singled out as not having that register, and
execution in rtl8211f_config_init() returns early after commit
2c67301584 ("net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not
present").
But actually CLKOUT is configured through a different register for this
PHY. Instead of pretending this is PHYCR2 (which it is not), just add
some code for modifying this register inside the rtl8211f_disable_clk_out()
function, and move that outside the code portion that runs only if
PHYCR2 exists.
In practice this reorders the PHYCR2 writes to disable PHY-mode EEE and
to disable the CLKOUT for the normal RTL8211F variants, but this should
be perfectly fine.
It was not noted that RTL8211F(D)(I)-VD-CG would need a genphy_soft_reset()
call after disabling the CLKOUT. Despite that, we do it out of caution
and for symmetry with the other RTL8211F models.
Co-developed-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This variable is assigned in rtl821x_probe() and used in
rtl8211f_config_init(), which is more complex than it needs to be.
Simply testing the same condition from rtl821x_probe() in
rtl8211f_config_init() yields the same result (the PHY driver ID is a
runtime invariant), but with one temporary variable less.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTL8211F(D)(I)-VD-CG PHY also has support for disabling the CLKOUT,
and we'd like to introduce the "realtek,clkout-disable" property for
that.
But it isn't done through the PHYCR2 register, and it becomes awkward to
have the driver pretend that it is. So just replace the machine-level
"u16 phycr2" variable with a logical "bool disable_clk_out", which
scales better to the other PHY as well.
The change is a complete functional equivalent. Before, if the device
tree property was absent, priv->phycr2 would contain the RTL8211F_CLKOUT_EN
bit as read from hardware. Now, we don't save priv->phycr2, but we just
don't call phy_modify_paged() on it. Also, we can simply call
phy_modify_paged() with the "set" argument to 0.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251117234033.345679-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The control flow in rtl8211f_config_init() has some pitfalls which were
probably unintended. Specifically it has an early return:
switch (phydev->interface) {
...
default: /* the rest of the modes imply leaving delay as is. */
return 0;
}
which exits the entire config_init() function. This means it also skips
doing things such as disabling CLKOUT or disabling PHY-mode EEE.
For the RTL8211FS, which uses PHY_INTERFACE_MODE_SGMII, this might be a
problem. However, I don't know that it is, so there is no Fixes: tag.
The issue was observed through code inspection.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the vmxnet3 driver to use the new .get_rx_ring_count ethtool
operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by removing the
switch statement and replacing it with a direct return of the queue
count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251118-vmxnet3_grxrings-v1-1-ed8abddd2d52@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-11-18 (idpf, ice)
This series contains updates to idpf and ice drivers.
Emil adds a check for NULL vport_config during removal to avoid NULL
pointer dereference in idpf.
Grzegorz fixes PTP teardown paths to account for some missed cleanups
for ice driver.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix PTP cleanup on driver removal in error path
idpf: fix possible vport_config NULL pointer deref in remove
====================
Link: https://patch.msgid.link/20251118235207.2165495-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the TM tree is printing all SQ topology including those
which are not enabled, this results in redundant output for SQs
which are not active. This patch adds a check in print_tm_tree()
to skip printing the TM tree hierarchy if the SQ is not enabled.
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251118054235.1599714-1-agaur@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Scanning can be offloaded to the firmware. To that end, the driver
prepares a list of channels to scan, including periodic visits back to
the operating channel, and sends the list to the firmware.
When the channel list is too long to fit in a single H2C message, the
driver splits the list, sends the first part, and tells the firmware to
scan. When the scan is complete, the driver sends the next part of the
list and tells the firmware to scan.
When the last channel that fit in the H2C message is the operating
channel something seems to go wrong in the firmware. It will
acknowledge receiving the list of channels but apparently it will not
do anything more. The AP can't be pinged anymore. The driver still
receives beacons, though.
One way to avoid this is to split the list of channels before the
operating channel.
Affected devices:
* RTL8851BU with firmware 0.29.41.3
* RTL8832BU with firmware 0.29.29.8
* RTL8852BE with firmware 0.29.29.8
The commit 57a5fbe39a ("wifi: rtw89: refactor flow that hw scan handles channel list")
is found by git blame, but it is actually to refine the scan flow, but not
a culprit, so skip Fixes tag.
Reported-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/0abbda91-c5c2-4007-84c8-215679e652e1@gmail.com/
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/c1e61744-8db4-4646-867f-241b47d30386@gmail.com
stmmac_is_jumbo_frm() returns whether the driver considers the frame
size to be a jumbo frame, and thus returns 0/1 values. This is boolean,
so convert it to return a boolean and use false/true instead. Also
convert stmmac_xmit()'s is_jumbo to be bool, which causes several
variables to be repositioned to keep it in reverse Christmas-tree
order.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vLIWW-0000000Ewkl-21Ia@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pause, Asym_Pause and Autoneg bits are not set when pl->supported is
initialized, so these link modes will not work for the fixed-link. This
leads to a TCP performance degradation issue observed on the i.MX943
platform.
The switch CPU port of i.MX943 is connected to an ENETC MAC, this link
is a fixed link and the link speed is 2.5Gbps. And one of the switch
user ports is the RGMII interface, and its link speed is 1Gbps. If the
flow-control of the fixed link is not enabled, we can easily observe
the iperf performance of TCP packets is very low. Because the inbound
rate on the CPU port is greater than the outbound rate on the user port,
the switch is prone to congestion, leading to the loss of some TCP
packets and requiring multiple retransmissions.
Solving this problem should be as simple as setting the Asym_Pause and
Pause bits. The reason why the Autoneg bit needs to be set, Russell
has gave a very good explanation in the thread [1], see below.
"As the advertising and lp_advertising bitmasks have to be non-empty,
and the swphy reports aneg capable, aneg complete, and AN enabled, then
for consistency with that state, Autoneg should be set. This is how it
was prior to the blamed commit."
Fixes: de7d3f87be ("net: phylink: Use phy_caps_lookup for fixed-link configuration")
Link: https://lore.kernel.org/aRjqLN8eQDIQfBjS@shell.armlinux.org.uk # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251117102943.1862680-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of a FW issue, FW might be not responding to FW commands,
causing kernel lockout for a long period of time, e.g. rtnl_lock held
while ethtool is trying to collect stats waiting for FW to respond to
multiple commands, when all of them will timeout.
While there's no immediate indication of the FW lockout, we can safely
assume that something is wrong when all command slots are busy and in
a timeout state and no FW completion was received on any of them.
In such case, start immediately failing new commands.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763415729-1238421-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the TX timestamp handler to recover the SQ when the difference
between the port and CQE TX timestamps is abnormally large.
The current logic aborts timestamp delivery if the delta exceeds
1/128 seconds, which matches the maximum expected packet interval in
ptp4l. A larger delta makes the timestamps unreliable.
This change adds recovery if the delta exceeds 0.5 seconds. Such a
large gap should not occur in normal operation and indicates that
firmware is stuck or metadata tracking is out of sync, leading to stale
or mismatched timestamps. Recovering the SQ ensures forward progress
and avoids silently dropping invalid timestamps.
The timestamp handler now takes mlx5e_ptpsq directly to access both CQ
stats and the recovery state.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763415729-1238421-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
