Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. It was spotted by UBSAN.
So let's just fix this by using the BIT() helper for all SB_* flags.
Fixes: e462ec50cb ("VFS: Differentiate mount flags (MS_*) from internal superblock flags")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Message-Id: <20230424051835.374204-1-gehao@kylinos.cn>
[brauner@kernel.org: use BIT() for all SB_* flags]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull x86 fix from Borislav Petkov:
- Add the required PCI IDs so that the generic SMN accesses provided by
amd_nb.c work for drivers which switch to them. Add a PCI device ID
to k10temp's table so that latter is loaded on such systems too
* tag 'x86_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hwmon: (k10temp) Add PCI ID for family 19, model 78h
x86/amd_nb: Add PCI ID for family 19h model 78h
Pull io_uring fix from Jens Axboe:
"Just a single fix making io_uring_sqe_cmd() available regardless of
CONFIG_IO_URING, fixing a regression introduced during the merge
window if nvme was selected but io_uring was not"
* tag 'io_uring-6.4-2023-05-12' of git://git.kernel.dk/linux:
io_uring: make io_uring_sqe_cmd() unconditionally available
Pull drm fixes from Dave Airlie:
"About the usual for this stage, bunch of amdgpu, a few i915 and a
scattering of fixes across the board"
dsc:
- macro fixes
simplefb:
- fix VESA format
scheduler:
- timeout handling fix
fbdev:
- avoid potential out-of-bounds access in generic fbdev emulation
ast:
- improve AST2500+ compat on ARM
mipi-dsi:
- small mipi-dsi fix
amdgpu:
- VCN3 fixes
- APUs always support PCI atomics
- legacy power management fixes
- DCN 3.1.4 fix
- DCFCLK fix
- fix several RAS irq refcount mismatches
- GPU Reset fix
- GFX 11.0.4 fix
i915:
- taint kernel when force_probe is used
- NULL deref and div-by-zero fixes for display
- GuC error capture fix for Xe devices"
* tag 'drm-fixes-2023-05-12' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amdgpu: change gfx 11.0.4 external_id range
drm/amdgpu/jpeg: Remove harvest checking for JPEG3
drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras
drm/amd/pm: avoid potential UBSAN issue on legacy asics
drm/i915: taint kernel when force probing unsupported devices
drm/i915/dp: prevent potential div-by-zero
drm/i915: Fix NULL ptr deref by checking new_crtc_state
drm/i915/guc: Don't capture Gen8 regs on Xe devices
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)
drm/amdgpu: drop gfx_v11_0_cp_ecc_error_irq_funcs
drm/amd/display: Enforce 60us prefetch for 200Mhz DCFCLK modes
drm/amd/display: Add symclk workaround during disable link output
drm/amd/pm: parse pp_handle under appropriate conditions
drm/amdgpu: set gfx9 onwards APU atomics support to be true
drm/amdgpu/nv: update VCN 3 max HEVC encoding resolution
drm/sched: Check scheduler work queue before calling timeout handling
drm/mipi-dsi: Set the fwnode for mipi_dsi_device
drm/nouveau/disp: More DP_RECEIVER_CAP_SIZE array fixes
drm/dsc: fix DP_DSC_MAX_BPP_DELTA_* macro values
...
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- mtk_eth_soc: fix NULL pointer dereference
Previous releases - regressions:
- core:
- skb_partial_csum_set() fix against transport header magic value
- fix load-tearing on sk->sk_stamp in sock_recv_cmsgs().
- annotate sk->sk_err write from do_recvmmsg()
- add vlan_get_protocol_and_depth() helper
- netlink: annotate accesses to nlk->cb_running
- netfilter: always release netdev hooks from notifier
Previous releases - always broken:
- core: deal with most data-races in sk_wait_event()
- netfilter: fix possible bug_on with enable_hooks=1
- eth: bonding: fix send_peer_notif overflow
- eth: xpcs: fix incorrect number of interfaces
- eth: ipvlan: fix out-of-bounds caused by unclear skb->cb
- eth: stmmac: Initialize MAC_ONEUS_TIC_COUNTER register"
* tag 'net-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits)
af_unix: Fix data races around sk->sk_shutdown.
af_unix: Fix a data race of sk->sk_receive_queue->qlen.
net: datagram: fix data-races in datagram_poll()
net: mscc: ocelot: fix stat counter register values
ipvlan:Fix out-of-bounds caused by unclear skb->cb
docs: networking: fix x25-iface.rst heading & index order
gve: Remove the code of clearing PBA bit
tcp: add annotations around sk->sk_shutdown accesses
net: add vlan_get_protocol_and_depth() helper
net: pcs: xpcs: fix incorrect number of interfaces
net: deal with most data-races in sk_wait_event()
net: annotate sk->sk_err write from do_recvmmsg()
netlink: annotate accesses to nlk->cb_running
kselftest: bonding: add num_grat_arp test
selftests: forwarding: lib: add netns support for tc rule handle stats get
Documentation: bonding: fix the doc of peer_notif_delay
bonding: fix send_peer_notif overflow
net: ethernet: mtk_eth_soc: fix NULL pointer dereference
selftests: nft_flowtable.sh: check ingress/egress chain too
selftests: nft_flowtable.sh: monitor result file sizes
...
Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3c
("bonding: add an option to specify a delay between peer notifications").
the bond->send_peer_notif will be num_peer_notif multiplied by
peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif
overflow easily. e.g.
ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000
To fix the overflow, let's set the send_peer_notif to u32 and limit
peer_notif_delay to 300s.
Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053
Fixes: 07a4ddec3c ("bonding: add an option to specify a delay between peer notifications")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If CONFIG_IO_URING isn't set, then io_uring_sqe_cmd() is not defined.
As the nvme driver uses this helper, it causes a compilation issue:
drivers/nvme/host/ioctl.c: In function 'nvme_uring_cmd_io':
drivers/nvme/host/ioctl.c:555:44: error: implicit declaration of function 'io_uring_sqe_cmd'; did you mean 'io_uring_free'? [-Werror=implicit-function-declaration]
555 | const struct nvme_uring_cmd *cmd = io_uring_sqe_cmd(ioucmd->sqe);
| ^~~~~~~~~~~~~~~~
| io_uring_free
Fix it by just making io_uring_sqe_cmd() generally available - the types
are known, and there's no reason to hide it under CONFIG_IO_URING.
Fixes: fd9b8547bc ("io_uring: Pass whole sqe to commands")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add return value for dim_calc_stats. This is an indication for the
caller if curr_stats was assigned by the function. Avoid using
curr_stats uninitialized over {rdma/net}_dim, when no time delta between
samples. Coverity reported this potential use of an uninitialized
variable.
Fixes: 4c4dbb4a73 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Fixes: cb3c7fd4f8 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit
310e782a99 ("platform/x86/amd: pmc: Utilize SMN index 0 for driver probe")
switched to using amd_smn_read() which relies upon the misc PCI ID used
by DF function 3 being included in a table. The ID for model 78h is
missing in that table, so amd_smn_read() doesn't work.
Add the missing ID into amd_nb, restoring s2idle on this system.
[ bp: Simplify commit message. ]
Fixes: 310e782a99 ("platform/x86/amd: pmc: Utilize SMN index 0 for driver probe")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230427053338.16653-2-mario.limonciello@amd.com
Pull mailbox updates from Jassi Brar:
- mailbox api: allow direct registration to a channel and convert omap
and pcc to use mbox_bind_client
- omap and hi6220 : use of_property_read_bool
- test: fix double-free and use spinlock header
- rockchip and bcm-pdc: drop of_match_ptr
- mpfs: change config symbol
- mediatek gce: support MT6795
- qcom apcs: consolidate of_device_id and support IPQ9574
* tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC
mailbox: qcom-apcs-ipc: do not grow the of_device_id
dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants
dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
mailbox: bcm-pdc: drop of_match_ptr for ID table
mailbox: rockchip: drop of_match_ptr for ID table
mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()
mailbox: mailbox-test: Explicitly include header for spinlock support
mailbox: Use of_property_read_bool() for boolean properties
mailbox: pcc: Use mbox_bind_client
mailbox: omap: Use mbox_bind_client
mailbox: Allow direct registration to a channel
Pull more io_uring updates from Jens Axboe:
"Nothing major in here, just two different parts:
- A small series from Breno that enables passing the full SQE down
for ->uring_cmd().
This is a prerequisite for enabling full network socket operations.
Queued up a bit late because of some stylistic concerns that got
resolved, would be nice to have this in 6.4-rc1 so the dependent
work will be easier to handle for 6.5.
- Fix for the huge page coalescing, which was a regression introduced
in the 6.3 kernel release (Tobias)"
* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
io_uring: Remove unnecessary BUILD_BUG_ON
io_uring: Pass whole sqe to commands
io_uring: Create a helper to return the SQE size
io_uring/rsrc: check for nonconsecutive pages
Pull more block updates from Jens Axboe:
- MD pull request via Song:
- Improve raid5 sequential IO performance on spinning disks, which
fixes a regression since v6.0 (Jan Kara)
- Fix bitmap offset types, which fixes an issue introduced in this
merge window (Jonathan Derrick)
- Cleanup of hweight type used for cgroup writeback (Maxim)
- Fix a regression with the "has_submit_bio" changes across partitions
(Ming)
- Cleanup of QUEUE_FLAG_ADD_RANDOM clearing.
We used to set this flag on queues non blk-mq queues, and hence some
drivers clear it unconditionally. Since all of these have since been
converted to true blk-mq drivers, drop the useless clear as the bit
is not set (Chaitanya)
- Fix the flags being set in a bio for a flush for drbd (Christoph)
- Cleanup and deduplication of the code handling setting block device
capacity (Damien)
- Fix for ublk handling IO timeouts (Ming)
- Fix for a regression in blk-cgroup teardown (Tao)
- NBD documentation and code fixes (Eric)
- Convert blk-integrity to using device_attributes rather than a second
kobject to manage lifetimes (Thomas)
* tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux:
ublk: add timeout handler
drbd: correctly submit flush bio on barrier
mailmap: add mailmap entries for Jens Axboe
block: Skip destroyed blkg when restart in blkg_destroy_all()
writeback: fix call of incorrect macro
md: Fix bitmap offset type in sb writer
md/raid5: Improve performance for sequential IO
docs nbd: userspace NBD now favors github over sourceforge
block nbd: use req.cookie instead of req.handle
uapi nbd: add cookie alias to handle
uapi nbd: improve doc links to userspace spec
blk-integrity: register sysfs attributes on struct device
blk-integrity: convert to struct device_attribute
blk-integrity: use sysfs_emit
block/drivers: remove dead clear of random flag
block: sync part's ->bd_has_submit_bio with disk's
block: Cleanup set_capacity()/bdev_set_nr_sectors()
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- sched: act_pedit: free pedit keys on bail from offset check
Current release - new code bugs:
- pds_core:
- Kconfig fixes (DEBUGFS and AUXILIARY_BUS)
- fix mutex double unlock in error path
Previous releases - regressions:
- sched: cls_api: remove block_cb from driver_list before freeing
- nf_tables: fix ct untracked match breakage
- eth: mtk_eth_soc: drop generic vlan rx offload
- sched: flower: fix error handler on replace
Previous releases - always broken:
- tcp: fix skb_copy_ubufs() vs BIG TCP
- ipv6: fix skb hash for some RST packets
- af_packet: don't send zero-byte data in packet_sendmsg_spkt()
- rxrpc: timeout handling fixes after moving client call connection
to the I/O thread
- ixgbe: fix panic during XDP_TX with > 64 CPUs
- igc: RMW the SRRCTL register to prevent losing timestamp config
- dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621
- r8152:
- fix flow control issue of RTL8156A
- fix the poor throughput for 2.5G devices
- move setting r8153b_rx_agg_chg_indicate() to fix coalescing
- enable autosuspend
- ncsi: clear Tx enable mode when handling a Config required AEN
- octeontx2-pf: macsec: fixes for CN10KB ASIC rev
Misc:
- 9p: remove INET dependency"
* tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
pds_core: fix mutex double unlock in error path
net/sched: flower: fix error handler on replace
Revert "net/sched: flower: Fix wrong handle assignment during filter change"
net/sched: flower: fix filter idr initialization
net: fec: correct the counting of XDP sent frames
bonding: add xdp_features support
net: enetc: check the index of the SFI rather than the handle
sfc: Add back mailing list
virtio_net: suppress cpu stall when free_unused_bufs
ice: block LAN in case of VF to VF offload
net: dsa: mt7530: fix network connectivity with multiple CPU ports
net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
9p: Remove INET dependency
netfilter: nf_tables: fix ct untracked match breakage
af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
igc: read before write to SRRCTL register
pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig
pds_core: remove CONFIG_DEBUG_FS from makefile
ionic: catch failure from devlink_alloc
...
Pull more i2c updates from Wolfram Sang:
"Some more driver bugfixes and a DT binding conversion"
* tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: brcm,kona-i2c: convert to YAML
i2c: gxp: fix build failure without CONFIG_I2C_SLAVE
i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks
i2c: omap: Fix standard mode false ACK readings
i2c: tegra: Fix PEC support for SMBUS block read
Pull more tracing updates from Steven Rostedt:
- Make buffer_percent read/write.
The buffer_percent file is how users can state how long to block on
the tracing buffer depending on how much is in the buffer. When it
hits the "buffer_percent" it will wake the task waiting on the
buffer. For some reason it was set to read-only.
This was not noticed because testing was done as root without
SELinux, but with SELinux it will prevent even root to write to it
without having CAP_DAC_OVERRIDE.
- The "touched_functions" was added this merge window, but one of the
reasons for adding it was not implemented.
That was to show what functions were not only touched, but had either
a direct trampoline attached to it, or a kprobe or live kernel
patching that can "hijack" the function to run a different function.
The point is to know if there's functions in the kernel that may not
be behaving as the kernel code shows. This can be used for debugging.
TODO: Add this information to kernel oops too.
* tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached
tracing: Fix permissions for the buffer_percent file
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
If a function had ever had IPMODIFY or DIRECT attached to it, where this
is how live kernel patching and BPF overrides work, mark them and display
an "M" in the enabled_functions and touched_functions files. This can be
used for debugging. If a function had been modified and later there's a bug
in the code related to that function, this can be used to know if the cause
is possibly from a live kernel patch or a BPF program that changed the
behavior of the code.
Also update the documentation on the enabled_functions and
touched_functions output, as it was missing direct callers and CALL_OPS.
And include this new modify attribute.
Link: https://lore.kernel.org/linux-trace-kernel/20230502213233.004e3ae4@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Introduce xdp_features support for bonding driver according to the slave
devices attached to the master one. xdp_features is required whenever we
want to xdp_redirect traffic into a bond device and then into selected
slaves attached to it.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jussi Maki <joamaki@gmail.com>
Tested-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull 9p updates from Eric Van Hensbergen:
"This includes a number of patches that didn't quite make the cut last
merge window while we addressed some outstanding issues and review
comments. It includes some new caching modes for those that only want
readahead caches and reworks how we do writeback caching so we are not
keeping extra references around which both causes performance problems
and uses lots of additional resources on the server.
It also includes a new flag to force disabling of xattrs which can
also cause major performance issues, particularly if the underlying
filesystem on the server doesn't support them.
Finally it adds a couple of additional mount options to better support
directio and enabling caches when the server doesn't support
qid.version.
There was one late-breaking bug report that has also been included as
its own patch where I forgot to propagate an embarassing bit-logic fix
to the various variations of open"
* tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: Fix bit operation logic error
fs/9p: Rework cache modes and add new options to Documentation
fs/9p: remove writeback fid and fix per-file modes
fs/9p: Add new mount modes
9p: Add additional debug flags and open modes
fs/9p: allow disable of xattr support on mount
fs/9p: Remove unnecessary superblock flags
fs/9p: Consolidate file operations and add readahead and writeback
Pull more MM updates from Andrew Morton:
- Some DAMON cleanups from Kefeng Wang
- Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE
ioctl's behavior more similar to KSM's behavior.
[ Andrew called these "final", but I suspect we'll have a series fixing
up the fact that the last commit in the dmapools series in the
previous pull seems to have unintentionally just reverted all the
other commits in the same series.. - Linus ]
* tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: hwpoison: coredump: support recovery from dump_user_range()
mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page()
mm/ksm: move disabling KSM from s390/gmap code to KSM code
selftests/ksm: ksm_functional_tests: add prctl unmerge test
mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0
mm/damon/paddr: fix missing folio_sz update in damon_pa_young()
mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate()
mm/damon/paddr: minor refactor of damon_pa_pageout()
Currently uring CMD operation relies on having large SQEs, but future
operations might want to use normal SQE.
The io_uring_cmd currently only saves the payload (cmd) part of the SQE,
but, for commands that use normal SQE size, it might be necessary to
access the initial SQE fields outside of the payload/cmd block. So,
saves the whole SQE other than just the pdu.
This changes slightly how the io_uring_cmd works, since the cmd
structures and callbacks are not opaque to io_uring anymore. I.e, the
callbacks can look at the SQE entries, not only, in the cmd structure.
The main advantage is that we don't need to create custom structures for
simple commands.
Creates io_uring_sqe_cmd() that returns the cmd private data as a null
pointer and avoids casting in the callee side.
Also, make most of ublk_drv's sqe->cmd priv structure into const, and use
io_uring_sqe_cmd() to get the private structure, removing the unwanted
cast. (There is one case where the cast is still needed since the
header->{len,addr} is updated in the private structure)
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-3-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull more sysctl updates from Luis Chamberlain:
"As mentioned on my first pull request for sysctl-next, for v6.4-rc1
we're very close to being able to deprecating register_sysctl_paths().
I was going to assess the situation after the first week of the merge
window.
That time is now and things are looking good. We only have one which
had already an ACK for so I'm picking this up here now and the last
patch is the one that uses an axe.
I have boot tested the last patch and 0-day build completed
successfully"
* tag 'sysctl-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove register_sysctl_paths()
kernel: pid_namespace: simplify sysctls with register_sysctl()
Pull more thermal control updates from Rafael Wysocki:
"These are mostly cleanups on top of the previously merged thermal
control changes plus some driver fixes and the removal of the Intel
Menlow thermal driver.
Specifics:
- Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs
check warning (Stefan Wahren)
- Update the example in the DT bindings to reflect changes with the
ADC node name for QCom TM and TM5 (Marijn Suijten)
- Fix comments for the cpuidle_cooling_register() function to match
the function prototype (Chenggang Wang)
- Fix inconsistent temperature read and some Mediatek variant board
reboot by reverting a change and handling the temperature
differently (AngeloGioacchino Del Regno)
- Fix a memory leak in the initialization error path for the Mediatek
driver (Kang Chen)
- Use of_address_to_resource() in the Mediatek driver (Rob Herring)
- Fix unit address in the QCom tsens driver DT bindings (Krzysztof
Kozlowski)
- Clean up the step-wise thermal governor (Zhang Rui)
- Introduce thermal_zone_device() for accessing the device field of
struct thermal_zone_device and two drivers use it (Daniel Lezcano)
- Clean up the ACPI thermal driver a bit (Daniel Lezcano)
- Delete the thermal driver for Intel Menlow platforms that is not
expected to have any users (Rafael Wysocki)"
* tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: menlow: Get rid of this driver
ACPI: thermal: Move to dedicated function sysfs extra attr creation
ACPI: thermal: Use thermal_zone_device()
thermal: intel: pch_thermal: Use thermal driver device to write a trace
thermal: core: Encapsulate tz->device field
thermal: gov_step_wise: Adjust code logic to match comment
thermal: gov_step_wise: Delete obsolete comment
dt-bindings: thermal: qcom-tsens: Correct unit address
thermal/drivers/mediatek: Use of_address_to_resource()
thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
thermal/drivers/mediatek: Add temperature constraints to validate read
Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
thermal/drivers/cpuidle_cooling: Delete unmatched comments
dt-bindings: thermal: Use generic ADC node name in examples
dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible
Pull pwm updates from Thierry Reding:
"The bulk of this is trivial conversions to the new .remove_new()
callback for drivers as part of Uwe's effort to clean that up.
Other than that a driver is added for Apple devices and various small
fixes are included for existing drivers.
Last but not least, this finally gets rid of the old pwm_request() and
pwm_free() APIs are removed since the last user was dropped in v6.3"
* tag 'pwm/for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
pwm: Remove unused radix tree
pwm: Delete deprecated functions pwm_request() and pwm_free()
pwm: meson: Fix g12a ao clk81 name
pwm: meson: Fix axg ao mux parents
pwm: stm32: Enforce settings for PWM capture
MAINTAINERS: Add entries for Apple PWM driver
pwm: Add Apple PWM controller
dt-bindings: pwm: Add Apple PWM controller
pwm: mtk-disp: Configure double buffering before reading in .get_state()
pwm: mtk-disp: Disable shadow registers before setting backlight values
pwm: stm32-lp: Drop of_match_ptr for ID table
pwm: rcar: Drop of_match_ptr for ID table
dt-bindings: pwm: Convert Amlogic Meson PWM binding
dt-bindings: pwm: mediatek: Add mediatek,mt7986 compatible
pwm: xilinx: Convert to platform remove callback returning void
pwm: vt8500: Convert to platform remove callback returning void
pwm: tiehrpwm: Convert to platform remove callback returning void
pwm: tiecap: Convert to platform remove callback returning void
pwm: tegra: Convert to platform remove callback returning void
pwm: sun4i: Convert to platform remove callback returning void
...
Pull dmaengine updates from Vinod Koul:
"New support:
- Apple admac t8112 device support
- StarFive JH7110 DMA controller
Updates:
- Big pile of idxd updates to support IAA 2.0 device capabilities,
DSA 2.0 Event Log and completion record faulting features and
new DSA operations
- at_xdmac supend & resume updates and driver code cleanup
- k3-udma supend & resume support
- k3-psil thread support for J784s4"
* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
dmaengine: idxd: add per wq PRS disable
dmaengine: idxd: add pid to exported sysfs attribute for opened file
dmaengine: idxd: expose fault counters to sysfs
dmaengine: idxd: add a device to represent the file opened
dmaengine: idxd: add per file user counters for completion record faults
dmaengine: idxd: process batch descriptor completion record faults
dmaengine: idxd: add descs_completed field for completion record
dmaengine: idxd: process user page faults for completion record
dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
dmaengine: idxd: create kmem cache for event log fault items
dmaengine: idxd: add per DSA wq workqueue for processing cr faults
dmanegine: idxd: add debugfs for event log dump
dmaengine: idxd: add interrupt handling for event log
dmaengine: idxd: setup event log configuration
dmaengine: idxd: add event log size sysfs attribute
dmaengine: idxd: make misc interrupt one shot
dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
dt-bindings: dma: Drop unneeded quotes
dmaengine: at_xdmac: align declaration of ret with the rest of variables
dmaengine: at_xdmac: add a warning message regarding for unpaused channels
...
The gxp_i2c_slave_irq_handler() is hidden in an #ifdef, but the
caller uses an IS_ENABLED() check:
drivers/i2c/busses/i2c-gxp.c: In function 'gxp_i2c_irq_handler':
drivers/i2c/busses/i2c-gxp.c:467:29: error: implicit declaration of function 'gxp_i2c_slave_irq_handler'; did you mean 'gxp_i2c_irq_handler'? [-Werror=implicit-function-declaration]
It has to consistently use one method or the other to avoid warnings,
so move to IS_ENABLED() here for readability and build coverage, and
move the #ifdef in linux/i2c.h to allow building it as dead code.
Fixes: 4a55ed6f89 ("i2c: Add GXP SoC I2C Controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Toggle deleted anonymous sets as inactive in the next generation, so
users cannot perform any update on it. Clear the generation bitmask
in case the transaction is aborted.
The following KASAN splat shows a set element deletion for a bound
anonymous set that has been already removed in the same transaction.
[ 64.921510] ==================================================================
[ 64.923123] BUG: KASAN: wild-memory-access in nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.924745] Write of size 8 at addr dead000000000122 by task test/890
[ 64.927903] CPU: 3 PID: 890 Comm: test Not tainted 6.3.0+ #253
[ 64.931120] Call Trace:
[ 64.932699] <TASK>
[ 64.934292] dump_stack_lvl+0x33/0x50
[ 64.935908] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.937551] kasan_report+0xda/0x120
[ 64.939186] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.940814] nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.942452] ? __kasan_slab_alloc+0x2d/0x60
[ 64.944070] ? nf_tables_setelem_notify+0x190/0x190 [nf_tables]
[ 64.945710] ? kasan_set_track+0x21/0x30
[ 64.947323] nfnetlink_rcv_batch+0x709/0xd90 [nfnetlink]
[ 64.948898] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The deprecation for register_sysctl_paths() is over. We can rejoice as
we nuke register_sysctl_paths(). The routine register_sysctl_table()
was the only user left of register_sysctl_paths(), so we can now just
open code and move the implementation over to what used to be
to __register_sysctl_paths().
The old dynamic struct ctl_table_set *set is now the point to
sysctl_table_root.default_set.
The old dynamic const struct ctl_path *path was being used in the
routine register_sysctl_paths() with a static:
static const struct ctl_path null_path[] = { {} };
Since this is a null path we can now just simplfy the old routine
and remove its use as its always empty.
This saves us a total of 230 bytes.
$ ./scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 2/7 grow/shrink: 1/1 up/down: 1015/-1245 (-230)
Function old new delta
register_leaf_sysctl_tables.constprop - 524 +524
register_sysctl_table 22 497 +475
__pfx_register_leaf_sysctl_tables.constprop - 16 +16
null_path 8 - -8
__pfx_register_sysctl_paths 16 - -16
__pfx_register_leaf_sysctl_tables 16 - -16
__pfx___register_sysctl_paths 16 - -16
__register_sysctl_base 29 12 -17
register_sysctl_paths 18 - -18
register_leaf_sysctl_tables 534 - -534
__register_sysctl_paths 620 - -620
Total: Before=21259666, After=21259436, chg -0.00%
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
dump_user_range() is used to copy the user page to a coredump file, but if
a hardware memory error occurred during copy, which called from
__kernel_write_iter() in dump_user_range(), it crashes,
CPU: 112 PID: 7014 Comm: mca-recover Not tainted 6.3.0-rc2 #425
pc : __memcpy+0x110/0x260
lr : _copy_from_iter+0x3bc/0x4c8
...
Call trace:
__memcpy+0x110/0x260
copy_page_from_iter+0xcc/0x130
pipe_write+0x164/0x6d8
__kernel_write_iter+0x9c/0x210
dump_user_range+0xc8/0x1d8
elf_core_dump+0x308/0x368
do_coredump+0x2e8/0xa40
get_signal+0x59c/0x788
do_signal+0x118/0x1f8
do_notify_resume+0xf0/0x280
el0_da+0x130/0x138
el0t_64_sync_handler+0x68/0xc0
el0t_64_sync+0x188/0x190
Generally, the '->write_iter' of file ops will use copy_page_from_iter()
and copy_page_from_iter_atomic(), change memcpy() to copy_mc_to_kernel()
in both of them to handle #MC during source read, which stop coredump
processing and kill the task instead of kernel panic, but the source
address may not always a user address, so introduce a new copy_mc flag in
struct iov_iter{} to indicate that the iter could do a safe memory copy,
also introduce the helpers to set/cleck the flag, for now, it's only used
in coredump's dump_user_range(), but it could expand to any other
scenarios to fix the similar issue.
Link: https://lkml.kernel.org/r/20230417045323.11054-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Tong Tiangen <tongtiangen@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull VFIO updates from Alex Williamson:
- Expose and allow R/W access to the PCIe DVSEC capability through
vfio-pci, as we already do with the legacy vendor capability
(K V P Satyanarayana)
- Fix kernel-doc issues with structure definitions (Simon Horman)
- Clarify ordering of operations relative to the kvm-vfio device for
driver dependencies against the kvm pointer (Yi Liu)
* tag 'vfio-v6.4-rc1' of https://github.com/awilliam/linux-vfio:
docs: kvm: vfio: Suggest KVM_DEV_VFIO_GROUP_ADD vs VFIO_GROUP_GET_DEVICE_FD ordering
vfio: correct kdoc for ops structures
vfio/pci: Add DVSEC PCI Extended Config Capability to user visible list.
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for MediaTek MT6370 LED Indicator
- Add support for MediaTek MT6370 Flashlight
- Add support for QCOM PMIC Flash
- Add support for Rohm BD2606MVV Charge Pump LED
New Device Support:
- Add support for PMK8550 PWM to QCOM LPG
New Functionality:
- Add support for high resolution PWM to QCOM LPG
Fix-ups:
- Kconfig 'depends' and 'select' dependency changes
- Remove unused / irrelevant includes
- Remove unnecessary checks (already performed further into the call stack)
- Trivial: Fix commentary, simplify error messages
- Rid 'defined but not used' warnings
- Provide documentation
- Explicitly provide include files
Bug Fixes:
- Mark GPIO LED as BROKEN
- Fix Kconfig entries
- Fix various Smatch staticify reports
- Fix error handling (or a lack there of)"
* tag 'leds-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: leds: Add ROHM BD2606MVV LED
docs: leds: ledtrig-oneshot: Fix spelling mistake
leds: pwm-multicolor: Simplify an error message
dt-bindings: leds: Convert PCA9532 to dtschema
leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM
leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
leds: tca6507: Fix error handling of using fwnode_property_read_string
leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static
leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB
MAINTAINERS: Add entry for LED devices documentation
Documentation: leds: MT6370: Use bullet lists for timing variables
Documentation: leds: mt6370: Properly wrap hw_pattern chart
Documentation: leds: Add MT6370 doc to the toctree
leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
docs: leds: Add MT6370 RGB LED pattern document
leds: flash: mt6370: Add MediaTek MT6370 flashlight support
leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
...
Pull input updates from Dmitry Torokhov:
- a new driver for Novatek touch controllers
- a new driver for power button for NXP BBNSM
- a skeleton KUnit tests for the input core
- improvements to Xpad game controller driver to support more devices
- improvements to edt-ft5x06, hideep and other drivers
* tag 'input-for-v6.4-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits)
Revert "Input: xpad - fix support for some third-party controllers"
dt-bindings: input: pwm-beeper: convert to dt schema
Input: xpad - fix PowerA EnWired Controller guide button
Input: xpad - add constants for GIP interface numbers
Input: synaptics-rmi4 - fix function name in kerneldoc
Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe
Input: edt-ft5x06 - select REGMAP_I2C
Input: melfas_mip4 - report palm touches
Input: cma3000_d0x - remove unneeded code
Input: edt-ft5x06 - calculate points data length only once
Input: edt-ft5x06 - unify the crc check
Input: edt-ft5x06 - convert to use regmap API
Input: edt-ft5x06 - don't print error messages with dev_dbg()
Input: edt-ft5x06 - remove code duplication
Input: edt-ft5x06 - don't recalculate the CRC
Input: edt-ft5x06 - add spaces to ensure format specification
Input: edt-ft5x06 - remove unnecessary blank lines
Input: edt-ft5x06 - fix indentation
Input: tsc2007 - enable cansleep pendown GPIO
Input: Add KUnit tests for some of the input core helper functions
...
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
Pull i3c updates from Alexandre Belloni:
"Subsystem:
- OF alias bus numbering
- convert to platform remove callback returning void
New driver:
- AST2600 controller, based on Synopsys DesignWare IP
Driver update:
- dw: add infrastructure to support different platform integrations"
* tag 'i3c/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: ast2600: set variable ast2600_i3c_ops storage-class-specifier to static
i3c: ast2600: fix register setting for 545 ohm pullups
i3c: ast2600: enable IBI support
i3c: dw: Add a platform facility for IBI PEC workarounds
i3c: dw: Add support for in-band interrupts
i3c: dw: Turn DAT array entry into a struct
i3c: dw: Create a generic fifo read function
i3c: Allow OF-alias-based persistent bus numbering
i3c: ast2600: Add AST2600 platform-specific driver
dt-bindings: i3c: Add AST2600 i3c controller
i3c: dw: Add infrastructure for platform-specific implementations
i3c: dw: use bus mode rather than device reg for conditional tCAS setting
i3c: dw: Return the length from a read priv_xfer
i3c: svc: Convert to platform remove callback returning void
i3c: mipi-i3c-hci: Convert to platform remove callback returning void
i3c: cdns: Convert to platform remove callback returning void
i3c: dw: Convert to platform remove callback returning void
i3c: Make i3c_master_unregister() return void
i3c: dw: drop of_match_ptr for ID table
i3c: Correct reference to the I²C device data type
Pull tpm fix from Jarkko Sakkinen:
"This fixes a critical bug in my first pull request.
I fixed the cherry pick issue and tested with real hardare and
libvirt/qemu plus swtpm"
* tag 'tpmdd-v6.4-rc1-fix-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Re-enable TPM chip boostrapping non-tpm_tis TPM drivers
afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may
get stalled in the background waiting for a connection to become
available); it then calls rxrpc_kernel_set_max_life() to set the timeouts -
but that starts the call timer so the call timer might then expire before
we get a connection assigned - leading to the following oops if the call
stalled:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701
RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157
...
Call Trace:
<TASK>
rxrpc_send_ACK+0x50/0x13b
rxrpc_input_call_event+0x16a/0x67d
rxrpc_io_thread+0x1b6/0x45f
? _raw_spin_unlock_irqrestore+0x1f/0x35
? rxrpc_input_packet+0x519/0x519
kthread+0xe7/0xef
? kthread_complete_and_exit+0x1b/0x1b
ret_from_fork+0x22/0x30
Fix this by noting the timeouts in struct rxrpc_call when the call is
created. The timer will be started when the first packet is transmitted.
It shouldn't be possible to trigger this directly from userspace through
AF_RXRPC as sendmsg() will return EBUSY if the call is in the
waiting-for-conn state if it dropped out of the wait due to a signal.
Fixes: 9d35d880e0 ("rxrpc: Move client call connection to the I/O thread")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull iommu updates from Joerg Roedel:
- Convert to platform remove callback returning void
- Extend changing default domain to normal group
- Intel VT-d updates:
- Remove VT-d virtual command interface and IOASID
- Allow the VT-d driver to support non-PRI IOPF
- Remove PASID supervisor request support
- Various small and misc cleanups
- ARM SMMU updates:
- Device-tree binding updates:
* Allow Qualcomm GPU SMMUs to accept relevant clock properties
* Document Qualcomm 8550 SoC as implementing an MMU-500
* Favour new "qcom,smmu-500" binding for Adreno SMMUs
- Fix S2CR quirk detection on non-architectural Qualcomm SMMU
implementations
- Acknowledge SMMUv3 PRI queue overflow when consuming events
- Document (in a comment) why ATS is disabled for bypass streams
- AMD IOMMU updates:
- 5-level page-table support
- NUMA awareness for memory allocations
- Unisoc driver: Support for reattaching an existing domain
- Rockchip driver: Add missing set_platform_dma_ops callback
- Mediatek driver: Adjust the dma-ranges
- Various other small fixes and cleanups
* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
iommu: Remove iommu_group_get_by_id()
iommu: Make iommu_release_device() static
iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
iommu/vt-d: Remove BUG_ON in map/unmap()
iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
iommu/vt-d: Remove BUG_ON on checking valid pfn range
iommu/vt-d: Make size of operands same in bitwise operations
iommu/vt-d: Remove PASID supervisor request support
iommu/vt-d: Use non-privileged mode for all PASIDs
iommu/vt-d: Remove extern from function prototypes
iommu/vt-d: Do not use GFP_ATOMIC when not needed
iommu/vt-d: Remove unnecessary checks in iopf disabling path
iommu/vt-d: Move PRI handling to IOPF feature path
iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
iommu/vt-d: Move iopf code from SVA to IOPF enabling path
iommu/vt-d: Allow SVA with device-specific IOPF
dmaengine: idxd: Add enable/disable device IOPF feature
arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
...
Pull compute express link updates from Dan Williams:
"DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
blessing, and the CXL core continues to mature its media management
capabilities with support for listing and injecting media errors. Some
late fixes that missed v6.3-final are also included:
- Refactor the DOE infrastructure (Data Object Exchange
PCI-config-cycle mailbox) to be a facility of the PCI core rather
than the CXL core.
This is foundational for upcoming support for PCI
device-attestation and PCIe / CXL link encryption.
- Add support for retrieving and injecting poison for CXL memory
expanders.
This enabling uses trace-events to convey CXL media error records
to user tooling. It includes translation of device-local addresses
(DPA) to system physical addresses (SPA) and their corresponding
CXL region.
- Fixes for decoder enumeration that missed v6.3-final
- Miscellaneous fixups"
* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
cxl/test: Add mock test for set_timestamp
cxl/mbox: Update CMD_RC_TABLE
tools/testing/cxl: Require CONFIG_DEBUG_FS
tools/testing/cxl: Add a sysfs attr to test poison inject limits
tools/testing/cxl: Use injected poison for get poison list
tools/testing/cxl: Mock the Clear Poison mailbox command
tools/testing/cxl: Mock the Inject Poison mailbox command
cxl/mem: Add debugfs attributes for poison inject and clear
cxl/memdev: Trace inject and clear poison as cxl_poison events
cxl/memdev: Warn of poison inject or clear to a mapped region
cxl/memdev: Add support for the Clear Poison mailbox command
cxl/memdev: Add support for the Inject Poison mailbox command
tools/testing/cxl: Mock support for Get Poison List
cxl/trace: Add an HPA to cxl_poison trace events
cxl/region: Provide region info to the cxl_poison trace event
cxl/memdev: Add trigger_poison_list sysfs attribute
cxl/trace: Add TRACE support for CXL media-error records
cxl/mbox: Add GET_POISON_LIST mailbox command
cxl/mbox: Initialize the poison state
cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
...
Pull EFI updates from Ard Biesheuvel:
- relocate the LoongArch kernel if the preferred address is already
occupied
- implement BTI annotations for arm64 EFI stub and zboot images
- clean up arm64 zboot Kbuild rules for injecting the kernel code size
* tag 'efi-next-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/zboot: arm64: Grab code size from ELF symbol in payload
efi/zboot: arm64: Inject kernel code size symbol into the zboot payload
efi/zboot: Set forward edge CFI compat header flag if supported
efi/zboot: Add BSS padding before compression
arm64: efi: Enable BTI codegen and add PE/COFF annotation
efi/pe: Import new BTI/IBT header flags from the spec
efi/loongarch: Reintroduce efi_relocate_kernel() to relocate kernel
Pull power supply and reset updates from Sebastian Reichel:
- power-supply core support for automatic handling of constant battery
data supplied by firmware
- generic-adc-battery: major cleanup
- axp288_charger: fix ACPI issues on x86 Android tablets
- rk817: cleanup and fix handling for low state of charge
* tag 'for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (26 commits)
power: supply: rk817: Fix low SOC bugs
power: supply: rk817: Drop unneeded debugging code
power: supply: axp288_charger: Use alt usb-id extcon on some x86 android tablets
power: supply: generic-adc-battery: style fixes
power: supply: generic-adc-battery: improve error message
power: supply: generic-adc-battery: update copyright info
power: supply: generic-adc-battery: add DT support
power: supply: generic-adc-battery: add temperature support
power: supply: generic-adc-battery: simplify read_channel logic
power: supply: generic-adc-battery: use simple-battery API
power: supply: generic-adc-battery: drop memory alloc error message
power: supply: generic-adc-battery: drop charge now support
power: supply: generic-adc-battery: drop jitter delay support
power: supply: generic-adc-battery: fix unit scaling
power: supply: generic-adc-battery: convert to managed resources
power: supply: core: auto-exposure of simple-battery data
dt-bindings: power: supply: adc-battery: add binding
power: supply: bq256xx: Support to disable charger
power: supply: charger-manager: Use of_property_read_bool() for boolean properties
power: reset: qcom-pon: drop of_match_ptr for ID table
...
