Pull timers and timekeeping updates from Thomas Gleixner:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relocations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they
fail to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up in
the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context of
different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource
is installed, i.e. timekeeping is still tick based and the tick
period advances from there.
The early enablement of sched_clock() broke this alignement as the
time accumulated by sched_clock() is taken into account when
timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is
not longer a multiple of tick periods, which breaks applications
which relied on that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements:
* Cure the concurrent writer race for idle and IO sleeptime
statistics
The statitic values which are exposed via /proc/stat are updated
from the CPU local idle exit and remotely by cpufreq, but that
happens without any form of serialization. As a consequence
sleeptimes can be accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
* Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race
with idle exit updates. As a consequence the readout may result
in random and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing
the remote runqueues nr_iowait counter. The latter is impossible
to fix, so the only way to deal with that is to document it
properly and to remove the assertion in the selftest which
triggers occasionally due to that.
* Restructure struct tick_sched for better cache layout
* Some small cleanups and a better cache layout for struct
tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU
timers
For unknown reason the introduction of the timer_wait_running()
callback missed to fixup posix CPU timers, which went unnoticed for
almost four years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels,
it turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled
systems there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU
timers out from hard interrupt context to task work, which is handled
before returning to user space or to a VM. The expiry mechanism moves
the expired timers to a stack local list head with sighand lock held.
Once sighand is dropped the task can be preempted and a task which
wants to delete a timer will spin-wait until the expiry task is
scheduled back in. In the worst case this will end up in a livelock
when the preempting task and the expiry task are pinned on the same
CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which
uses a per CPU timer-base expiry lock which is held by the expiry
code and the task waiting for the timer function to complete blocks
on that lock.
This does not work in the same way for posix CPU timers as there is
no timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry
lock can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry
task hold it accross the expiry function and let the deleting task
which waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra
mutex_lock()/unlock() pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents
the livelock and cures the problem for RT and !RT systems
* tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Implement the missing timer_wait_running callback
selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity
selftests/proc: Remove idle time monotonicity assertions
MAINTAINERS: Remove stale email address
timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick()
timers/nohz: Add a comment about broken iowait counter update race
timers/nohz: Protect idle/iowait sleep time under seqcount
timers/nohz: Only ever update sleeptime from idle exit
timers/nohz: Restructure and reshuffle struct tick_sched
tick/common: Align tick period with the HZ tick.
selftests/timers/posix_timers: Test delivery of signals across threads
posix-timers: Prefer delivery of signals to the current thread
vdso: Improve cmd_vdso_check to check all dynamic relocations
Pull interrupt updates from Thomas Gleixner:
"Core:
- Add tracepoints for tasklet callbacks which makes it possible to
analyze individual tasklet functions instead of guess working from
the overall duration of tasklet processing
- Ensure that secondary interrupt threads have their affinity
adjusted correctly
Drivers:
- A large rework of the RISC-V IPI management to prepare for a new
RISC-V interrupt architecture
- Small fixes and enhancements all over the place
- Removal of support for various obsolete hardware platforms and the
related code"
* tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip/st: Remove stih415/stih416 and stid127 platforms support
irqchip/gic-v3: Add Rockchip 3588001 erratum workaround
genirq: Update affinity of secondary threads
softirq: Add trace points for tasklet entry/exit
irqchip/loongson-pch-pic: Fix pch_pic_acpi_init calling
irqchip/loongson-pch-pic: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent
irqchip/loongson-eiointc: Fix returned value on parsing MADT
irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers
RISC-V: Use IPIs for remote icache flush when possible
RISC-V: Use IPIs for remote TLB flush when possible
RISC-V: Allow marking IPIs as suitable for remote FENCEs
RISC-V: Treat IPIs as normal Linux IRQs
irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
RISC-V: Clear SIP bit only when using SBI IPI operations
irqchip/irq-sifive-plic: Add syscore callbacks for hibernation
irqchip: Use of_property_read_bool() for boolean properties
irqchip/bcm-6345-l1: Request memory region
irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4
...
Pull core entry/ptrace update from Thomas Gleixner:
"Provide a ptrace set/get interface for syscall user dispatch. The main
purpose is to enable checkpoint/restore (CRIU) to handle processes
which utilize syscall user dispatch correctly"
* tag 'core-entry-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest, ptrace: Add selftest for syscall user dispatch config api
ptrace: Provide set/get interface for syscall user dispatch
syscall_user_dispatch: Untag selector address before access_ok()
syscall_user_dispatch: Split up set_syscall_user_dispatch()
Pull x86 SEV updates from Borislav Petkov:
- Add the necessary glue so that the kernel can run as a confidential
SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the
address space in two parts: encrypted and unencrypted. The use case
being running unmodified guests on the Hyper-V confidential computing
hypervisor
- Double-buffer messages between the guest and the hardware PSP device
so that no partial buffers are copied back'n'forth and thus potential
message integrity and leak attacks are possible
- Name the return value the sev-guest driver returns when the hw PSP
device hasn't been called, explicitly
- Cleanups
* tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Change vTOM handling to use standard coco mechanisms
init: Call mem_encrypt_init() after Hyper-V hypercall init is done
x86/mm: Handle decryption/re-encryption of bss_decrypted consistently
Drivers: hv: Explicitly request decrypted in vmap_pfn() calls
x86/hyperv: Reorder code to facilitate future work
x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM
x86/sev: Change snp_guest_issue_request()'s fw_err argument
virt/coco/sev-guest: Double-buffer messages
crypto: ccp: Get rid of __sev_platform_init_locked()'s local function pointer
crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL
Pull legacy dio cleanup from Al Viro.
* tag 'pull-old-dio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
__blockdev_direct_IO(): get rid of submit_io callback
Pull vfs write_one_page removal from Al Viro:
"write_one_page series"
* tag 'pull-write-one-page' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mm,jfs: move write_one_page/folio_write_one to jfs
ocfs2: don't use write_one_page in ocfs2_duplicate_clusters_by_page
ufs: don't flush page immediately for DIRSYNC directories
Pull vfs fget updates from Al Viro:
"fget() to fdget() conversions"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse_dev_ioctl(): switch to fdget()
cgroup_get_from_fd(): switch to fdget_raw()
bpf: switch to fdget_raw()
build_mount_idmapped(): switch to fdget()
kill the last remaining user of proc_ns_fget()
SVM-SEV: convert the rest of fget() uses to fdget() in there
convert sgx_set_attribute() to fdget()/fdput()
convert setns(2) to fdget()/fdput()
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-04-24
We've added 5 non-merge commits during the last 3 day(s) which contain
a total of 7 files changed, 87 insertions(+), 44 deletions(-).
The main changes are:
1) Workaround for bpf iter selftest due to lack of subprog support
in precision tracking, from Andrii.
2) Disable bpf_refcount_acquire kfunc until races are fixed, from Dave.
3) One more test_verifier test converted from asm macro to asm in C,
from Eduard.
4) Fix build with NETFILTER=y INET=n config, from Florian.
5) Add __rcu_read_{lock,unlock} into deny list, from Yafang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: avoid mark_all_scalars_precise() trigger in one of iter tests
bpf: Add __rcu_read_{lock,unlock} into btf id deny list
bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed
selftests/bpf: verifier/prevent_map_lookup converted to inline assembly
bpf: fix link failure with NETFILTER=y INET=n
====================
Link: https://lore.kernel.org/r/20230425005648.86714-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Reduce jumpstack footprint: Stash chain in last rule marker in blob for
tracing. Remove last rule and chain from jumpstack. From Florian Westphal.
2) nf_tables validates all tables before committing the new rules.
Unfortunately, this has two drawbacks:
- Since addition of the transaction mutex pernet state gets written to
outside of the locked section from the cleanup callback, this is
wrong so do this cleanup directly after table has passed all checks.
- Revalidate tables that saw no changes. This can be avoided by
keeping the validation state per table, not per netns.
From Florian Westphal.
3) Get rid of a few redundant pointers in the traceinfo structure.
The three removed pointers are used in the expression evaluation loop,
so gcc keeps them in registers. Passing them to the (inlined) helpers
thus doesn't increase nft_do_chain text size, while stack is reduced
by another 24 bytes on 64bit arches. From Florian Westphal.
4) IPVS cleanups in several ways without implementing any functional
changes, aside from removing some debugging output:
- Update width of source for ip_vs_sync_conn_options
The operation is safe, use an annotation to describe it properly.
- Consistently use array_size() in ip_vs_conn_init()
It seems better to use helpers consistently.
- Remove {Enter,Leave}Function. These seem to be well past their
use-by date.
- Correct spelling in comments.
From Simon Horman.
5) Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
* tag 'nf-next-23-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: allow to create netdev chain without device
netfilter: nf_tables: support for deleting devices in an existing netdev chain
netfilter: nf_tables: support for adding new devices to an existing netdev chain
netfilter: nf_tables: rename function to destroy hook list
netfilter: nf_tables: do not send complete notification of deletions
netfilter: nf_tables: extended netlink error reporting for netdevice
ipvs: Correct spelling in comments
ipvs: Remove {Enter,Leave}Function
ipvs: Consistently use array_size() in ip_vs_conn_init()
ipvs: Update width of source for ip_vs_sync_conn_options
netfilter: nf_tables: do not store rule in traceinfo structure
netfilter: nf_tables: do not store verdict in traceinfo structure
netfilter: nf_tables: do not store pktinfo in traceinfo structure
netfilter: nf_tables: remove unneeded conditional
netfilter: nf_tables: make validation state per table
netfilter: nf_tables: don't write table validation state without mutex
netfilter: nf_tables: don't store chain address on jump
netfilter: nf_tables: don't store address of last rule on jump
netfilter: nf_tables: merge nft_rules_old structure and end of ruleblob marker
====================
Link: https://lore.kernel.org/r/20230421235021.216950-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull erofs updates from Gao Xiang:
"In this cycle, sub-page block support for uncompressed files is
available. It's mainly used to enable original signing ('golden')
4k-block images on arm64 with 16/64k pages. In addition, end users
could also use this feature to build a manifest to directly refer to
golden tar data.
Besides, long xattr name prefix support is also introduced in this
cycle to avoid too many xattrs with the same prefix (e.g. overlayfs
xattrs). It's useful for erofs + overlayfs combination (like Composefs
model): the image size is reduced by ~14% and runtime performance is
also slightly improved.
Others are random fixes and cleanups as usual.
Summary:
- Add sub-page block size support for uncompressed files
- Support flattened block device for multi-blob images to be attached
into virtual machines (including cloud servers) and bare metals
- Support long xattr name prefixes to optimize images with common
xattr namespaces (e.g. files with overlayfs xattrs) use cases
- Various minor cleanups & fixes"
* tag 'erofs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: cleanup i_format-related stuffs
erofs: sunset erofs_dbg()
erofs: fix potential overflow calculating xattr_isize
erofs: get rid of z_erofs_fill_inode()
erofs: enable long extended attribute name prefixes
erofs: handle long xattr name prefixes properly
erofs: add helpers to load long xattr name prefixes
erofs: introduce on-disk format for long xattr name prefixes
erofs: move packed inode out of the compression part
erofs: keep meta inode into erofs_buf
erofs: initialize packed inode after root inode is assigned
erofs: stop parsing non-compact HEAD index if clusterofs is invalid
erofs: don't warn ztailpacking feature anymore
erofs: simplify erofs_xattr_generic_get()
erofs: rename init_inode_xattrs with erofs_ prefix
erofs: move several xattr helpers into xattr.c
erofs: tidy up EROFS on-disk naming
erofs: support flattened block device for multi-blob images
erofs: set block size to the on-disk block size
erofs: avoid hardcoded blocksize for subpage block support
Pull vfs open fixlet from Christian Brauner:
"EINVAL ist keinmal: This contains the changes to make O_DIRECTORY when
specified together with O_CREAT an invalid request.
The wider background is that a regression report about the behavior of
O_DIRECTORY | O_CREAT was sent to fsdevel about a behavior that was
changed multiple years and LTS releases earlier during v5.7
development.
This has also been covered in
https://lwn.net/Articles/926782/
which provides an excellent summary of the discussion"
* tag 'v6.4/vfs.open' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
open: return EINVAL for O_DIRECTORY | O_CREAT
Pull misc vfs updates from Christian Brauner:
"This contains a pile of various smaller fixes. Most of them aren't
very interesting so this just highlights things worth mentioning:
- Various filesystems contained the same little helper to convert
from the mode of a dentry to the DT_* type of that dentry.
They have now all been switched to rely on the generic
fs_umode_to_dtype() helper. All custom helpers are removed (Jeff)
- Fsnotify now reports ACCESS and MODIFY events for splice
(Chung-Chiang Cheng)
- After converting timerfd a long time ago to rely on
wait_event_interruptible_*() apis, convert eventfd as well. This
removes the complex open-coded wait code (Wen Yang)
- Simplify sysctl registration for devpts, avoiding the declaration
of two tables. Instead, just use a prefixed path with
register_sysctl() (Luis)
- The setattr_should_drop_sgid() helper is now exported so NFS can
use it. By switching NFS to this helper an NFS setgid inheritance
bug is fixed (me)"
* tag 'v6.4/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode()
pnode: pass mountpoint directly
eventfd: use wait_event_interruptible_locked_irq() helper
splice: report related fsnotify events
fs: consolidate duplicate dt_type helpers
nfs: use vfs setgid helper
Update relatime comments to include equality
fs/buffer: Remove redundant assignment to err
fs_context: drop the unused lsm_flags member
fs/namespace: fnic: Switch to use %ptTd
Documentation: update idmappings.rst
devpts: simplify two-level sysctl registration for pty_kern_table
eventpoll: align comment with nested epoll limitation
Pull acl updates from Christian Brauner:
"After finishing the introduction of the new posix acl api last cycle
the generic POSIX ACL xattr handlers are still around in the
filesystems xattr handlers for two reasons:
(1) Because a few filesystems rely on the ->list() method of the
generic POSIX ACL xattr handlers in their ->listxattr() inode
operation.
(2) POSIX ACLs are only available if IOP_XATTR is raised. The
IOP_XATTR flag is raised in inode_init_always() based on whether
the sb->s_xattr pointer is non-NULL. IOW, the registered xattr
handlers of the filesystem are used to raise IOP_XATTR. Removing
the generic POSIX ACL xattr handlers from all filesystems would
risk regressing filesystems that only implement POSIX ACL support
and no other xattrs (nfs3 comes to mind).
This contains the work to decouple POSIX ACLs from the IOP_XATTR flag
as they don't depend on xattr handlers anymore. So it's now possible
to remove the generic POSIX ACL xattr handlers from the sb->s_xattr
list of all filesystems. This is a crucial step as the generic POSIX
ACL xattr handlers aren't used for POSIX ACLs anymore and POSIX ACLs
don't depend on the xattr infrastructure anymore.
Adressing problem (1) will require more long-term work. It would be
best to get rid of the ->list() method of xattr handlers completely at
some point.
For erofs, ext{2,4}, f2fs, jffs2, ocfs2, and reiserfs the nop POSIX
ACL xattr handler is kept around so they can continue to use
array-based xattr handler indexing.
This update does simplify the ->listxattr() implementation of all
these filesystems however"
* tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
acl: don't depend on IOP_XATTR
ovl: check for ->listxattr() support
reiserfs: rework priv inode handling
fs: rename generic posix acl handlers
reiserfs: rework ->listxattr() implementation
fs: simplify ->listxattr() implementation
fs: drop unused posix acl handlers
xattr: remove unused argument
xattr: add listxattr helper
xattr: simplify listxattr helpers
Pull pidfd updates from Christian Brauner:
"This adds a new pidfd_prepare() helper which allows the caller to
reserve a pidfd number and allocates a new pidfd file that stashes the
provided struct pid.
It should be avoided installing a file descriptor into a task's file
descriptor table just to close it again via close_fd() in case an
error occurs. The fd has been visible to userspace and might already
be in use. Instead, a file descriptor should be reserved but not
installed into the caller's file descriptor table.
If another failure path is hit then the reserved file descriptor and
file can just be put without any userspace visible side-effects. And
if all failure paths are cleared the file descriptor and file can be
installed into the task's file descriptor table.
This helper is now used in all places that open coded this
functionality before. For example, this is currently done during
copy_process() and fanotify used pidfd_create(), which returns a pidfd
that has already been made visibile in the caller's file descriptor
table, but then closed it using close_fd().
In one of the next merge windows there is also new functionality
coming to unix domain sockets that will have to rely on
pidfd_prepare()"
* tag 'v6.4/pidfd.file' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fanotify: use pidfd_prepare()
fork: use pidfd_prepare()
pid: add pidfd_prepare()
Pull user work thread updates from Christian Brauner:
"This contains the work generalizing the ability to create a kernel
worker from a userspace process.
Such user workers will run with the same credentials as the userspace
process they were created from providing stronger security and
accounting guarantees than the traditional override_creds() approach
ever could've hoped for.
The original work was heavily based and optimzed for the needs of
io_uring which was the first user. However, as it quickly turned out
the ability to create user workers inherting properties from a
userspace process is generally useful.
The vhost subsystem currently creates workers using the kthread api.
The consequences of using the kthread api are that RLIMITs don't work
correctly as they are inherited from khtreadd. This leads to bugs
where more workers are created than would be allowed by the RLIMITs of
the userspace process in lieu of which workers are created.
Problems like this disappear with user workers created from the
userspace processes for which they perform the work. In addition,
providing this api allows vhost to remove additional complexity. For
example, cgroup and mm sharing will just work out of the box with user
workers based on the relevant userspace process instead of manually
ensuring the correct cgroup and mm contexts are used.
So the vhost subsystem should simply be made to use the same mechanism
as io_uring. To this end the original mechanism used for
create_io_thread() is generalized into user workers:
- Introduce PF_USER_WORKER as a generic indicator that a given task
is a user worker, i.e., a kernel task that was created from a
userspace process. Now a PF_IO_WORKER thread is just a specialized
version of PF_USER_WORKER. So io_uring io workers raise both flags.
- Make copy_process() available to core kernel code
- Extend struct kernel_clone_args with the following bitfields
allowing to indicate to copy_process():
- to create a user worker (raise PF_USER_WORKER)
- to not inherit any files from the userspace process
- to ignore signals
After all generic changes are in place the vhost subsystem implements
a new dedicated vhost api based on user workers. Finally, vhost is
switched to rely on the new api moving it off of kthreads.
Thanks to Mike for sticking it out and making it through this rather
arduous journey"
* tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
vhost: use vhost_tasks for worker threads
vhost: move worker thread fields to new struct
vhost_task: Allow vhost layer to use copy_process
fork: allow kernel code to call copy_process
fork: Add kernel_clone_args flag to ignore signals
fork: add kernel_clone_args flag to not dup/clone files
fork/vm: Move common PF_IO_WORKER behavior to new flag
kernel: Make io_thread and kthread bit fields
kthread: Pass in the thread's name during creation
kernel: Allow a kernel thread's name to be set in copy_process
csky: Remove kernel_thread declaration
Pull KUnit updates from Shuah Khan:
- several fixes to kunit tool
- new klist structure test
- support for m68k under QEMU
- support for overriding the QEMU serial port
- support for SH under QEMU
* tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: add tests for using current KUnit test field
kunit: tool: Add support for SH under QEMU
kunit: tool: Add support for overriding the QEMU serial port
.gitignore: Unignore .kunitconfig
list: test: Test the klist structure
kunit: increase KUNIT_LOG_SIZE to 2048 bytes
kunit: Use gfp in kunit_alloc_resource() kernel-doc
kunit: tool: fix pre-existing `mypy --strict` errors and update run_checks.py
kunit: tool: remove unused imports and variables
kunit: tool: add subscripts for type annotations where appropriate
kunit: fix bug of extra newline characters in debugfs logs
kunit: fix bug in the order of lines in debugfs logs
kunit: fix bug in debugfs logs of parameterized tests
kunit: tool: Add support for m68k under QEMU
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
Pull KCSAN updates from Paul McKenney:
"Kernel concurrency sanitizer (KCSAN) updates for v6.4
This fixes kernel-doc warnings and also updates instrumentation from
READ_ONCE() to volatile in order to avoid unaligned load-acquire
instructions on arm64 in kernels built with LTO"
* tag 'kcsan.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: Avoid READ_ONCE() in read_instrumented_memory()
instrumented.h: Fix all kernel-doc format warnings
Pull tpm updates from Jarkko Sakkinen:
- The .machine keyring, used for Machine Owner Keys (MOK), acquired the
ability to store only CA enforced keys, and put rest to the .platform
keyring, thus separating the code signing keys from the keys that are
used to sign certificates.
This essentially unlocks the use of the .machine keyring as a trust
anchor for IMA. It is an opt-in feature, meaning that the additional
contraints won't brick anyone who does not care about them.
- Enable interrupt based transactions with discrete TPM chips (tpm_tis).
There was code for this existing but it never really worked so I
consider this a new feature rather than a bug fix. Before the driver
just fell back to the polling mode.
Link: https://lore.kernel.org/linux-integrity/a93b6222-edda-d43c-f010-a59701f2aeef@gmx.de/
Link: https://lore.kernel.org/linux-integrity/20230302164652.83571-1-eric.snowberg@oracle.com/
* tag 'tpmdd-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (29 commits)
tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site
tpm_tis: fix stall after iowrite*()s
tpm/tpm_tis_synquacer: Convert to platform remove callback returning void
tpm/tpm_tis: Convert to platform remove callback returning void
tpm/tpm_ftpm_tee: Convert to platform remove callback returning void
tpm: tpm_tis_spi: Mark ACPI and OF related data as maybe unused
tpm: st33zp24: Mark ACPI and OF related data as maybe unused
tpm, tpm_tis: Enable interrupt test
tpm, tpm_tis: startup chip before testing for interrupts
tpm, tpm_tis: Claim locality when interrupts are reenabled on resume
tpm, tpm_tis: Claim locality in interrupt handler
tpm, tpm_tis: Request threaded interrupt handler
tpm, tpm: Implement usage counter for locality
tpm, tpm_tis: do not check for the active locality in interrupt handler
tpm, tpm_tis: Move interrupt mask checks into own function
tpm, tpm_tis: Only handle supported interrupts
tpm, tpm_tis: Claim locality before writing interrupt registers
tpm, tpm_tis: Do not skip reset of original interrupt vector
tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed
tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register
...
Pull landlock update from Mickaël Salaün:
"Improve user space documentation"
* tag 'landlock-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Clarify documentation for the LANDLOCK_ACCESS_FS_REFER right
Pull lsm updates from Paul Moore:
- Move the LSM hook comment blocks into security/security.c
For many years the LSM hook comment blocks were located in a very odd
place, include/linux/lsm_hooks.h, where they lived on their own,
disconnected from both the function prototypes and definitions.
In keeping with current kernel conventions, this moves all of these
comment blocks to the top of the function definitions, transforming
them into the kdoc format in the process. This should make it much
easier to maintain these comments, which are the main source of LSM
hook documentation.
For the most part the comment contents were left as-is, although some
glaring errors were corrected. Expect additional edits in the future
as we slowly update and correct the comment blocks.
This is the bulk of the diffstat.
- Introduce LSM_ORDER_LAST
Similar to how LSM_ORDER_FIRST is used to specify LSMs which should
be ordered before "normal" LSMs, the LSM_ORDER_LAST is used to
specify LSMs which should be ordered after "normal" LSMs.
This is one of the prerequisites for transitioning IMA/EVM to a
proper LSM.
- Remove the security_old_inode_init_security() hook
The security_old_inode_init_security() LSM hook only allows for a
single xattr which is problematic both for LSM stacking and the
IMA/EVM-as-a-LSM effort. This finishes the conversion over to the
security_inode_init_security() hook and removes the single-xattr LSM
hook.
- Fix a reiserfs problem with security xattrs
During the security_old_inode_init_security() removal work it became
clear that reiserfs wasn't handling security xattrs properly so we
fixed it.
* tag 'lsm-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (32 commits)
reiserfs: Add security prefix to xattr name in reiserfs_security_write()
security: Remove security_old_inode_init_security()
ocfs2: Switch to security_inode_init_security()
reiserfs: Switch to security_inode_init_security()
security: Remove integrity from the LSM list in Kconfig
Revert "integrity: double check iint_cache was initialized"
security: Introduce LSM_ORDER_LAST and set it for the integrity LSM
device_cgroup: Fix typo in devcgroup_css_alloc description
lsm: fix a badly named parameter in security_get_getsecurity()
lsm: fix doc warnings in the LSM hook comments
lsm: styling fixes to security/security.c
lsm: move the remaining LSM hook comments to security/security.c
lsm: move the io_uring hook comments to security/security.c
lsm: move the perf hook comments to security/security.c
lsm: move the bpf hook comments to security/security.c
lsm: move the audit hook comments to security/security.c
lsm: move the binder hook comments to security/security.c
lsm: move the sysv hook comments to security/security.c
lsm: move the key hook comments to security/security.c
lsm: move the xfrm hook comments to security/security.c
...
Pull selinux updates from Paul Moore:
- Stop passing the 'selinux_state' pointers as function arguments
As discussed during the end of the last development cycle, passing a
selinux_state pointer through the SELinux code has a noticeable
impact on performance, and with the current code it is not strictly
necessary.
This simplifies things by referring directly to the single
selinux_state global variable which should help improve SELinux
performance.
- Uninline the unlikely portions of avc_has_perm_noaudit()
This change was also based on a discussion from the last development
cycle, and is heavily based on an initial proof of concept patch from
you. The core issue was that avc_has_perm_noaudit() was not able to
be inlined, as intended, due to its size. We solved this issue by
extracting the less frequently hit portions of avc_has_perm_noaudit()
into a separate function, reducing the size of avc_has_perm_noaudit()
to the point where the compiler began inlining the function. We also
took the opportunity to clean up some ugly RCU locking in the code
that became uglier with the change.
- Remove the runtime disable functionality
After several years of work by the userspace and distro folks, we are
finally in a place where we feel comfortable removing the runtime
disable functionality which we initially deprecated at the start of
2020.
There is plenty of information in the kernel's deprecation (now
removal) notice, but the main motivation was to be able to safely
mark the LSM hook structures as '__ro_after_init'.
LWN also wrote a good summary of the deprecation this morning which
offers a more detailed history:
https://lwn.net/SubscriberLink/927463/dcfa0d4ed2872f03
- Remove the checkreqprot functionality
The original checkreqprot deprecation notice stated that the removal
would happen no sooner than June 2021, which means this falls hard
into the "better late than never" bucket.
The Kconfig and deprecation notice has more detail on this setting,
but the basic idea is that we want to ensure that the SELinux policy
allows for the memory protections actually applied by the kernel, and
not those requested by the process.
While we haven't found anyone running a supported distro that is
affected by this deprecation/removal, anyone who is affected would
only need to update their policy to reflect the reality of their
applications' mapping protections.
- Minor Makefile improvements
Some minor Makefile improvements to correct some dependency issues
likely only ever seen by SELinux developers. I expect we will have at
least one more tweak to the Makefile during the next merge window,
but it didn't quite make the cutoff this time around.
* tag 'selinux-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: ensure av_permissions.h is built when needed
selinux: fix Makefile dependencies of flask.h
selinux: stop returning node from avc_insert()
selinux: clean up dead code after removing runtime disable
selinux: update the file list in MAINTAINERS
selinux: remove the runtime disable functionality
selinux: remove the 'checkreqprot' functionality
selinux: stop passing selinux_state pointers and their offspring
selinux: uninline unlikely parts of avc_has_perm_noaudit()
Pull ITER_UBUF updates from Jens Axboe:
"This turns singe vector imports into ITER_UBUF, rather than
ITER_IOVEC.
The former is more trivial to iterate and advance, and hence a bit
more efficient. From some very unscientific testing, ~60% of all iovec
imports are single vector"
* tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux:
iov_iter: Mark copy_compat_iovec_from_user() noinline
iov_iter: import single vector iovecs as ITER_UBUF
iov_iter: convert import_single_range() to ITER_UBUF
iov_iter: overlay struct iovec and ubuf/len
iov_iter: set nr_segs = 1 for ITER_UBUF
iov_iter: remove iov_iter_iovec()
iov_iter: add iter_iov_addr() and iter_iov_len() helpers
ALSA: pcm: check for user backed iterator, not specific iterator type
IB/qib: check for user backed iterator, not specific iterator type
IB/hfi1: check for user backed iterator, not specific iterator type
iov_iter: add iter_iovec() helper
block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly
Merge PM core changes, updates related to system sleep support,
operating performance points (OPP) changes and power management
utilities changes for 6.4-rc1:
- Drop unnecessary (void *) conversions from the PM core (Li zeming).
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
(Mario Limonciello).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar).
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device if
ethtool exists.
* Make the tool more robustly handle events where mangled dmesg or
ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo).
* pm-core:
PM: core: Remove unnecessary (void *) conversions
* pm-sleep:
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state
* pm-opp:
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
opp: Use of_property_present() for testing DT property presence
* pm-tools:
PM: tools: sleepgraph: Recognize "CPU killed" messages
pm-graph: Update to v5.11
Merge cpufreq updates for 6.4-rc1:
- Fix the frequency unit in cpufreq_verify_current_freq checks()
(Sanjay Chandrashekara).
- Make mode_state_machine in amd-pstate static (Tom Rix).
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar).
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring).
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu).
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny).
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada).
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
* pm-cpufreq: (29 commits)
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
cpufreq: drivers with target_index() must set freq_table
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
cpufreq: mediatek: fix KP caused by handler usage after regulator_put/clk_put
cpufreq: mediatek: fix passing zero to 'PTR_ERR'
cpufreq: pmac32: Use of_property_read_bool() for boolean properties
cpufreq: Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry
cpufreq: warn about invalid vals to scaling_max/min_freq interfaces
Documentation: cpufreq: amd-pstate: Update amd_pstate status sysfs for guided
cpufreq: amd-pstate: Add guided mode control support via sysfs
cpufreq: amd-pstate: Add guided autonomous mode
...
Merge ACPI bus type driver changes, ACPI backlight driver updates and a
series of cleanups related to of.h for 6.4-rc1:
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
* acpi-bus:
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
* acpi-video:
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
* acpi-misc:
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
Merge ACPI processor driver changes, ACPI power management updates,
changes related to parsing ACPI tables and an ACPI sysfs interface
update for 6.4-rc1:
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne).
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu).
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen).
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser).
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker).
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko).
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan).
* acpi-processor:
ACPI: processor: Fix evaluating _PDC method when running as Xen dom0
ACPI: cpufreq: Use platform devices to load ACPI PPC and PCC drivers
ACPI: processor: Check for null return of devm_kzalloc() in fch_misc_setup()
* acpi-pm:
ACPI: s2idle: Log when enabling wakeup IRQ fails
* acpi-tables:
ACPI: VIOT: Initialize the correct IOMMU fwspec
ACPI: SPCR: Amend indentation
ACPI: SPCR: Prefix error messages with FW_BUG
* acpi-sysfs:
ACPI: sysfs: Enable ACPI sysfs support for CCEL records
Merge ACPICA material for 6.4-rc1:
- Delete bogus node_array array of pointers from AEST table (Jessica
Clarke).
- Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang).
- Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID()
(Xiongfeng Wang).
- Add missing tables to astable (Pedro Falcato).
- Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen).
- Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski).
- Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary).
- Update all copyrights/signons in ACPICA to 2023 (Bob Moore).
- Add support for ClockInput resource (v6.5) (Niyas Sait).
- Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L).
- Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L).
- Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein).
- Make ACPICA code support flexible arrays properly (Kees Cook).
- Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red).
- Add os specific support for Zephyr RTOS to ACPICA (Najumon).
- Update version to 20230331 (Bob Moore).
* acpica: (32 commits)
ACPICA: Update version to 20230331
ACPICA: add os specific support for Zephyr RTOS
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA: acpi_madt_oem_data: Fix flexible array member definition
ACPICA: acpi_dmar_andd: Replace 1-element array with flexible array
ACPICA: acpi_pci_routing_table: Replace fixed-size array with flex array member
ACPICA: struct acpi_resource_dma: Replace 1-element array with flexible array
ACPICA: Introduce ACPI_FLEX_ARRAY
ACPICA: struct acpi_nfit_interleave: Replace 1-element array with flexible array
ACPICA: actbl2: Replace 1-element arrays with flexible arrays
ACPICA: actbl1: Replace 1-element arrays with flexible arrays
ACPICA: struct acpi_resource_vendor: Replace 1-element array with flexible array
ACPICA: Avoid undefined behavior: load of misaligned address
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA: Avoid undefined behavior: member access within misaligned address
ACPICA: Avoid undefined behavior: member access within null pointer
ACPICA: Avoid undefined behavior: applying zero offset to null pointer
...
Parse the X.509 Key Usage. The key usage extension defines the purpose of
the key contained in the certificate.
id-ce-keyUsage OBJECT IDENTIFIER ::= { id-ce 15 }
KeyUsage ::= BIT STRING {
digitalSignature (0),
contentCommitment (1),
keyEncipherment (2),
dataEncipherment (3),
keyAgreement (4),
keyCertSign (5),
cRLSign (6),
encipherOnly (7),
decipherOnly (8) }
If the keyCertSign or digitalSignature is set, store it in the
public_key structure. Having the purpose of the key being stored
during parsing, allows enforcement on the usage field in the future.
This will be used in a follow on patch that requires knowing the
certificate key usage type.
Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.3
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Parse the X.509 Basic Constraints. The basic constraints extension
identifies whether the subject of the certificate is a CA.
BasicConstraints ::= SEQUENCE {
cA BOOLEAN DEFAULT FALSE,
pathLenConstraint INTEGER (0..MAX) OPTIONAL }
If the CA is true, store it in the public_key. This will be used
in a follow on patch that requires knowing if the public key is a CA.
Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.9
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The kernel test robot reports undefined reference to
public_key_verify_signature when CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is
not defined. Create a static version in this case and return -EINVAL.
Fixes: db6c43bd21 ("crypto: KEYS: convert public key and digsig asym to the akcipher api")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
ASoC: Updates for v6.4
The bulk of the commits here are for the conversion of drivers to use
void remove callbacks but there's a reasonable amount of other stuff
going on, the pace of development with the SOF code continues to be high
and there's a bunch of new drivers too:
- More core cleanups from Morimto-san.
- Update drivers to have remove() callbacks returning void, mostly
mechanical with some substantial changes.
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol.
- Hibernation support for CS35L45.
- More DT binding conversions.
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733.
Al pointed out that ksmbd has racy issue from using ->d_parent and ->d_name
in ksmbd_vfs_unlink and smb2_vfs_rename(). and use new lock_rename_child()
to lock stable parent while underlying rename racy.
Introduce vfs_path_parent_lookup helper to avoid out of share access and
export vfs functions like the following ones to use
vfs_path_parent_lookup().
- rename __lookup_hash() to lookup_one_qstr_excl().
- export lookup_one_qstr_excl().
- export getname_kernel() and putname().
vfs_path_parent_lookup() is used for parent lookup of destination file
using absolute pathname given from FILE_RENAME_INFORMATION request.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This makes sure hci_cmd_sync_queue only queue new work if HCI_RUNNING
has been set otherwise there is a risk of commands being sent while
turning off.
Because hci_cmd_sync_queue can no longer queue work while HCI_RUNNING is
not set it cannot be used to power on adapters so instead
hci_cmd_sync_submit is introduced which bypass the HCI_RUNNING check, so
it behaves like the old implementation.
Link: https://lore.kernel.org/all/CAB4PzUpDMvdc8j2MdeSAy1KkAE-D3woprCwAdYWeOc-3v3c9Sw@mail.gmail.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The ATS2851 based controller advertises support for command "LE Set Random
Private Address Timeout" but does not actually implement it, impeding the
controller initialization.
Add the quirk HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT to unblock the controller
initialization.
< HCI Command: LE Set Resolvable Private... (0x08|0x002e) plen 2
Timeout: 900 seconds
> HCI Event: Command Status (0x0f) plen 4
LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 1
Status: Unknown HCI Command (0x01)
Co-developed-by: imoc <wzj9912@gmail.com>
Signed-off-by: imoc <wzj9912@gmail.com>
Signed-off-by: Raul Cheleguini <raul.cheleguini@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When submitting HCI_OP_LE_CREATE_CIS the code shall wait for
HCI_EVT_LE_CIS_ESTABLISHED thus enforcing the serialization of
HCI_OP_LE_CREATE_CIS as the Core spec does not allow to send them in
parallel:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 2566:
If the Host issues this command before all the HCI_LE_CIS_Established
events from the previous use of the command have been generated, the
Controller shall return the error code Command Disallowed (0x0C).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes only matching CIS by address which prevents creating new hcon
if upper layer is requesting a specific CIS ID.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since it is required for some configurations to have multiple CIS with
the same peer which is now covered by iso-tester in the following test
cases:
ISO AC 6(i) - Success
ISO AC 7(i) - Success
ISO AC 8(i) - Success
ISO AC 9(i) - Success
ISO AC 11(i) - Success
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables 2M and Coded PHY by default if they are marked as supported
in the LE features bits.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Split bt_iso_qos into dedicated unicast and broadcast
structures and add additional broadcast parameters.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add devcoredump APIs to hci core so that drivers only have to provide
the dump skbs instead of managing the synchronization and timeouts.
The devcoredump APIs should be used in the following manner:
- hci_devcoredump_init is called to allocate the dump.
- hci_devcoredump_append is called to append any skbs with dump data
OR hci_devcoredump_append_pattern is called to insert a pattern.
- hci_devcoredump_complete is called when all dump packets have been
sent OR hci_devcoredump_abort is called to indicate an error and
cancel an ongoing dump collection.
The high level APIs just prepare some skbs with the appropriate data and
queue it for the dump to process. Packets part of the crashdump can be
intercepted in the driver in interrupt context and forwarded directly to
the devcoredump APIs.
Internally, there are 5 states for the dump: idle, active, complete,
abort and timeout. A devcoredump will only be in active state after it
has been initialized. Once active, it accepts data to be appended,
patterns to be inserted (i.e. memset) and a completion event or an abort
event to generate a devcoredump. The timeout is initialized at the same
time the dump is initialized (defaulting to 10s) and will be cleared
either when the timeout occurs or the dump is complete or aborted.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
