By design, an MPTCP connection will not accept extra subflows where no
MPTCP listening sockets can accept such requests.
In other words, it means that if the 'server' listens on a specific
address / device, it cannot accept MP_JOIN sent to a different address /
device. Except if there is another MPTCP listening socket accepting
them.
This is what the new tests are validating:
- Forcing a bind on the main v4/v6 address, and checking that MP_JOIN
to announced addresses are not accepted.
- Also forcing a bind on the main v4/v6 address, but before, another
listening socket is created to accept additional subflows. Note that
'mptcpize run nc -l' -- or something else only doing: socket(MPTCP),
bind(<IP>), listen(0) -- would be enough, but here mptcp_connect is
reused not to depend on another tool just for that.
- Same as the previous one, but using v6 link-local addresses: this is
a bit particular because it is required to specify the outgoing
network interface when connecting to a link-local address announced
by the other peer. When using the routing rules, this doesn't work
(the outgoing interface is not known) ; but it does work with a
'laminar' endpoint having a specified interface.
Note that extra small modifications are needed for these tests to work:
- mptcp_connect's check_getpeername_connect() check should strip the
specified interface when comparing addresses.
- With IPv6 link-local addresses, it is required to wait for them to
be ready (no longer in 'tentative' mode) before using them, otherwise
the bind() will not be allowed.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/591
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-4-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Our documentation is saying that the in-kernel PM is only using fullmesh
endpoints to establish subflows to announced addresses when at least one
endpoint has a fullmesh flag. But this was not totally correct: only
fullmesh endpoints were used if at least one endpoint *from the same
address family as the received ADD_ADDR* has the fullmesh flag.
This is confusing, and it seems clearer not to have differences
depending on the address family.
So, now, when at least one MPTCP endpoint has a fullmesh flag, the local
addresses are picked from all fullmesh endpoints, which might be 0 if
there are no endpoints for the correct address family.
One selftest needs to be adapted for this behaviour change.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-2-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are trying to move away from netdevsim-only tests and towards
tests which can be run both against netdevsim and real drivers.
Replace the simple bash script we have for checking ethtool -g/-G
on netdevsim with a Python test tweaking those params as well
as channel count.
The new test is not exactly equivalent to the netdevsim one,
but real drivers don't often support random ring sizes,
let alone modifying max values via debugfs.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251029164930.2923448-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that ICMP extensions are reported correctly when enabled and not
reported when disabled. Test both IPv4 and IPv6 and using different
packet sizes, to make sure trimming / padding works correctly.
Disable ICMP rate limiting (defaults to 1 per-second per-target) so that
the kernel will always generate ICMP errors when needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251027082232.232571-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Socket APIs like recvfrom(), accept(), and getsockname() expect socklen_t*
arg, but tests were using int variables. This causes -Wpointer-sign
warnings on platforms where socklen_t is unsigned.
Change the variable type from int to socklen_t to resolve the warning and
ensure type safety across platforms.
warning fixed:
sctp_collision.c:62:70: warning: passing 'int *' to parameter of
type 'socklen_t *' (aka 'unsigned int *') converts between pointers to
integer types with different sign [-Wpointer-sign]
62 | ret = recvfrom(sd, buf, sizeof(buf),
0, (struct sockaddr *)&daddr, &len);
| ^~~~
/usr/include/sys/socket.h:165:27: note: passing argument to
parameter '__addr_len' here
165 | socklen_t *__restrict __addr_len);
| ^
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251028172947.53153-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that outgoing plaintext records respect the tls TLS_TX_MAX_PAYLOAD_LEN
set using setsockopt(). The limit is set to be 128, thus, in all received
records, the plaintext must not exceed this amount.
Also test that setting a new record size limit whilst a pending open
record exists is handled correctly by discarding the request.
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251022001937.20155-2-wilfred.opensource@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to avoid the usage of the `ret` variable uninitialized in the
following macro expansions.
It solves the following warning:
In file included from netlink-dumps.c:21:
netlink-dumps.c: In function ‘dump_extack’:
../kselftest_harness.h:788:35: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized]
788 | intmax_t __exp_print = (intmax_t)__exp; \
| ^~~~~~~~~~~
../kselftest_harness.h:631:9: note: in expansion of macro ‘__EXPECT’
631 | __EXPECT(expected, #expected, seen, #seen, ==, 0)
| ^~~~~~~~
netlink-dumps.c:169:9: note: in expansion of macro ‘EXPECT_EQ’
169 | EXPECT_EQ(ret, FOUND_EXTACK);
| ^~~~~~~~~
The issue can be reproduced, building the tests, with the command:
make -C tools/testing/selftests TARGETS=net
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20251023205354.28249-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
sctp_vrf.sh could fail:
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [FAIL]
not ok 1 selftests: net: sctp_vrf.sh # exit=3
The failure happens when the server bind in a new run conflicts with an
existing association from the previous run:
[1] ip netns exec $SERVER_NS ./sctp_hello server ...
[2] ip netns exec $CLIENT_NS ./sctp_hello client ...
[3] ip netns exec $SERVER_NS pkill sctp_hello ...
[4] ip netns exec $SERVER_NS ./sctp_hello server ...
It occurs if the client in [2] sends a message and closes immediately.
With the message unacked, no SHUTDOWN is sent. Killing the server in [3]
triggers a SHUTDOWN the client also ignores due to the unacked message,
leaving the old association alive. This causes the bind at [4] to fail
until the message is acked and the client responds to a second SHUTDOWN
after the server’s T2 timer expires (3s).
This patch fixes the issue by preventing the client from sending data.
Instead, the client blocks on recv() and waits for the server to close.
It also waits until both the server and the client sockets are fully
released in stop_server and wait_client before restarting.
Additionally, replace 2>&1 >/dev/null with -q in sysctl and grep, and
drop other redundant 2>&1 >/dev/null redirections, and fix a typo from
N to Y (connect successfully) in the description of the last test.
Fixes: a61bd7b9fe ("selftests: add a selftest for sctp vrf")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/be2dacf52d0917c4ba5e2e8c5a9cb640740ad2b6.1760731574.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Replace bpf_map_kmalloc_node() with kmalloc_nolock() to fix kmemleak
imbalance in tracking of bpf_async_cb structures (Alexei Starovoitov)
- Make selftests/bpf arg_parsing.c more robust to errors (Andrii
Nakryiko)
- Fix redefinition of 'off' as different kind of symbol when I40E
driver is builtin (Brahmajit Das)
- Do not disable preemption in bpf_test_run (Sahil Chandna)
- Fix memory leak in __lookup_instance error path (Shardul Bankar)
- Ensure test data is flushed to disk before reading it (Xing Guo)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix redefinition of 'off' as different kind of symbol
bpf: Do not disable preemption in bpf_test_run().
bpf: Fix memory leak in __lookup_instance error path
selftests: arg_parsing: Ensure data is flushed to disk before reading.
bpf: Replace bpf_map_kmalloc_node() with kmalloc_nolock() to allocate bpf_async_cb structures.
selftests/bpf: make arg_parsing.c more robust to crashes
bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f470 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-10-16
We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 18 files changed, 577 insertions(+), 38 deletions(-).
The main changes are:
1) Bypass the global per-protocol memory accounting either by setting
a netns sysctl or using bpf_setsockopt in a bpf program,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add test for sk->sk_bypass_prot_mem.
bpf: Introduce SK_BPF_BYPASS_PROT_MEM.
bpf: Support bpf_setsockopt() for BPF_CGROUP_INET_SOCK_CREATE.
net: Introduce net.core.bypass_prot_mem sysctl.
net: Allow opt-out from global protocol memory accounting.
tcp: Save lock_sock() for memcg in inet_csk_accept().
====================
Link: https://patch.msgid.link/20251016204539.773707-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes the following build error
CLNG-BPF [test_progs] verifier_global_ptr_args.bpf.o
progs/verifier_global_ptr_args.c:228:5: error: redefinition of 'off' as
different kind of symbol
228 | u32 off;
| ^
The symbol 'off' was previously defined in
tools/testing/selftests/bpf/tools/include/vmlinux.h, which includes an
enum i40e_ptp_gpio_pin_state from
drivers/net/ethernet/intel/i40e/i40e_ptp.c:
enum i40e_ptp_gpio_pin_state {
end = -2,
invalid = -1,
off = 0,
in_A = 1,
in_B = 2,
out_A = 3,
out_B = 4,
};
This enum is included when CONFIG_I40E is enabled. As of commit
032676ff82 ("LoongArch: Update Loongson-3 default config file"),
CONFIG_I40E is set in the defconfig, which leads to the conflict.
Renaming the local variable avoids the redefinition and allows the
build to succeed.
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251017171551.53142-1-listout@listout.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test does the following for IPv4/IPv6 x TCP/UDP sockets
with/without sk->sk_bypass_prot_mem, which can be turned on by
net.core.bypass_prot_mem or bpf_setsockopt(SK_BPF_BYPASS_PROT_MEM).
1. Create socket pairs
2. Send NR_PAGES (32) of data (TCP consumes around 35 pages,
and UDP consuems 66 pages due to skb overhead)
3. Read memory_allocated from sk->sk_prot->memory_allocated and
sk->sk_prot->memory_per_cpu_fw_alloc
4. Check if unread data is charged to memory_allocated
If sk->sk_bypass_prot_mem is set, memory_allocated should not be
changed, but we allow a small error (up to 10 pages) in case
other processes on the host use some amounts of TCP/UDP memory.
The amount of allocated pages are buffered to per-cpu variable
{tcp,udp}_memory_per_cpu_fw_alloc up to +/- net.core.mem_pcpu_rsv
before reported to {tcp,udp}_memory_allocated.
At 3., memory_allocated is calculated from the 2 variables at
fentry of socket create function.
We drain the receive queue only for UDP before close() because UDP
recv queue is destroyed after RCU grace period. When I printed
memory_allocated, UDP bypass cases sometimes saw the no-bypass
case's leftover, but it's still in the small error range (<10 pages).
bpf_trace_printk: memory_allocated: 0 <-- TCP no-bypass
bpf_trace_printk: memory_allocated: 35
bpf_trace_printk: memory_allocated: 0 <-- TCP w/ sysctl
bpf_trace_printk: memory_allocated: 0
bpf_trace_printk: memory_allocated: 0 <-- TCP w/ bpf
bpf_trace_printk: memory_allocated: 0
bpf_trace_printk: memory_allocated: 0 <-- UDP no-bypass
bpf_trace_printk: memory_allocated: 66
bpf_trace_printk: memory_allocated: 2 <-- UDP w/ sysctl (2 pages leftover)
bpf_trace_printk: memory_allocated: 2
bpf_trace_printk: memory_allocated: 2 <-- UDP w/ bpf (2 pages leftover)
bpf_trace_printk: memory_allocated: 2
We prefer finishing tests faster than oversleeping for call_rcu()
+ sk_destruct().
The test completes within 2s on QEMU (64 CPUs) w/ KVM.
# time ./test_progs -t sk_bypass
#371/1 sk_bypass_prot_mem/TCP :OK
#371/2 sk_bypass_prot_mem/UDP :OK
#371/3 sk_bypass_prot_mem/TCPv6:OK
#371/4 sk_bypass_prot_mem/UDPv6:OK
#371 sk_bypass_prot_mem:OK
Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED
real 0m1.481s
user 0m0.181s
sys 0m0.441s
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-7-kuniyu@google.com
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back. However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop. This patch
helps fix it by adding the missing fsync() call.
Fixes: 64276f01dc ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251016035330.3217145-1-higuoxing@gmail.com
Add a simple test for the corner case not currently covered by the
sticky fingers quirk. Because it's a corner case test, we only test this
on a couple of devices, not on all of them because the value of adding
the same test over and over is rather moot.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Convert test_cpu to use the newly added values_close_report() helper
to print detailed diagnostics when a tolerance check fails. This
provides clearer insight into deviations while run in the CI.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some cgroup selftests, such as test_cpu, occasionally fail by a very
small margin and if run in the CI context, it is useful to have detailed
diagnostic output to understand the deviation.
Introduce a values_close_report() helper which performs the same
comparison as values_close(), but prints detailed information when the
values differ beyond the allowed tolerance.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We started getting a crash in BPF CI, which seems to originate from
test_parse_test_list_file() test and is happening at this line:
ASSERT_OK(strcmp("test_with_spaces", set.tests[0].name), "test 0 name");
One way we can crash there is if set.cnt zero, which is checked for with
ASSERT_EQ() above, but we proceed after this regardless of the outcome.
Instead of crashing, we should bail out with test failure early.
Similarly, if parse_test_list_file() fails, we shouldn't be even looking
at set, so bail even earlier if ASSERT_OK() fails.
Fixes: 64276f01dc ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20251014202037.72922-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The jq command is used in vlan_bridge_binding.sh, if it is not supported,
the test will spam the following log.
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# TEST: Test bridge_binding on->off when lower down [FAIL]
# Got operstate of , expected 0
The rtnetlink.sh has the same problem. It makes sense to check if jq is
installed before running these tests. After this patch, the
vlan_bridge_binding.sh skipped if jq is not supported:
# timeout set to 3600
# selftests: net: vlan_bridge_binding.sh
# TEST: jq not installed [SKIP]
Fixes: dca12e9ab7 ("selftests: net: Add a VLAN bridge binding selftest")
Fixes: 6a414fd77f ("selftests: rtnetlink: Add an address proto test")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251013080039.3035898-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The userspace-visible encoding for CNTV_CVAL_EL0 and CNTVCNT_EL0
have been swapped for as long as usersapce has had access to the
registers. This is documented in arch/arm64/include/uapi/asm/kvm.h.
Despite that, the get_reg_list test has unhelpful comments indicating
the wrong register for the encoding.
Replace this with definitions exposed in the include file, and
a comment explaining again the brokenness.
Signed-off-by: Marc Zyngier <maz@kernel.org>
The hyp virtual timer registers only exist when VHE is present,
Similarly, VNCR_EL2 only exists when NV2 is present.
Make these dependencies explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
vgic_lpi_stress rather hilariously leaves IRQs disabled for the duration
of the test. While the ITS translation of MSIs happens regardless of
this, for completeness the guest should actually handle the LPIs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
vcpus array contains pointers to struct kvm_vcpu {}. It is way overkill
to allocate the array with (nr_cpus * sizeof(struct kvm_vcpu)). Fix the
allocation by using the correct size.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We forgot to sync several registers (ID_AA64PFR1, MPIDR, CLIDR) in guest to
make sure that the guest had seen the written value.
Add them to the list.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-By: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The KVM_IRQFD ioctl fails if no irqchip is present in-kernel, which
isn't too surprising as there's not much KVM can do for an IRQ if it
cannot resolve a destination.
As written the irqfd_test assumes that a 'default' VM created in
selftests has an in-kernel irqchip created implicitly. That may be the
case on x86 but it isn't necessarily true on other architectures.
Add an arch predicate indicating if 'default' VMs get an irqchip and
make the irqfd_test depend on it. Work around arm64 VGIC initialization
requirements by using vm_create_with_one_vcpu(), ignoring the created
vCPU as it isn't used for the test.
Reported-by: Sebastian Ott <sebott@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Fixes: 7e9b231c40 ("KVM: selftests: Add a KVM_IRQFD test to verify uniqueness requirements")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Store the width of arm64's timer counter as an "int", not a "uint64_t".
ilog2() returns an "int", and more importantly using what is an "unsigned
long" under the hood makes clang unhappy due to a type mismatch when
clamping the width to a sane value.
arm64/arch_timer_edge_cases.c:1032:10: error: comparison of distinct pointer types
('typeof (width) *' (aka 'unsigned long *') and 'typeof (56) *' (aka 'int *'))
[-Werror,-Wcompare-distinct-pointer-types]
1032 | width = clamp(width, 56, 64);
| ^~~~~~~~~~~~~~~~~~~~
tools/include/linux/kernel.h:47:45: note: expanded from macro 'clamp'
47 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~~~~~~~~~~
tools/include/linux/kernel.h:33:17: note: expanded from macro 'max'
33 | (void) (&_max1 == &_max2); \
| ~~~~~~ ^ ~~~~~~
tools/include/linux/kernel.h:39:9: note: expanded from macro 'min'
39 | typeof(x) _min1 = (x); \
| ^
Fixes: fad4cf9448 ("KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases")
Cc: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
A defect against the architecture now allows an implementation to treat
AMO as 1 when HCR_EL2.{E2H, TGE} = {1, 0}. KVM now takes advantage of
this interpretation to address a quality of emulation issue w.r.t.
SError injection.
Add a corresponding test case and expect a pending SError to be taken.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Convert remaining __init__ files similar to what we did in
commit b615879dbf ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
