Emails to the maintainer of Qualcomm PPE Ethernet driver (Luo Jie
<quic_luoj@quicinc.com>) bounce permanently (full mailbox), because the
"quicinc.com" addresses were deprecated for public work. All Qualcomm
contributors are aware of that and were asked to fix their addresses.
Driver is not supported - in terms of how netdev understands supported
commitment - if maintainer does not care to receive the patches for its
code, so demote it to "maintained" to reflect true status.
Fix all occurences of Luo Jie email address to preferred and working
domain.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260623073307.36483-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
Merge in late fixes in preparation for the net-next PR.
Conflicts:
net/tls/tls_sw.c
406e8a651a ("net: skmsg: preserve sg.copy across SG transforms")
79511603a6 ("tls: remove dead sockmap (psock) handling from the SW path")
drivers/net/ethernet/microsoft/mana/mana_en.c
f8fd56977e ("net: mana: guard TX wq object destroy with INVALID_MANA_HANDLE check")
d07efe5a6e ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
https://lore.kernel.org/ajAPXu-C_PuTgV-a@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
Pull MMC updates from Ulf Hansson:
"MMC core:
- Validate host's max_segs to fail gracefully
MMC host:
- davinci:
- Avoid potential NULL dereference in the IRQ handler
- Call mmc_add_host() in the correct order during probe
- dw_mmc-exynos:
- Increase DMA threshold for exynos7870
- renesas_sdhi:
- Add support for RZ/G2E, RZ/G2N and R-Car M3Le variants
- sdhci-msm:
- Add support for Hawi, Eliza and Shikra variants
- sdhci-of-k1:
- Add support for SD UHS-I modes
- Add support for tuning for eMMC HS200 and SD UHS-I"
* tag 'mmc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (24 commits)
mmc: dw_mmc: Add desc_num field for clarity
dt-bindings: mmc: sdhci-msm: Rename the binding to include 'qcom' prefix
mmc: sdhci-of-dwcmshc: use dev_err_probe() to simplify error paths
mmc: sdhci-of-dwcmshc: remove redundant IS_ERR() check
dt-bindings: mmc: sdhci-msm: qcom: Add Hawi compatible
mmc: renesas_sdhi: Add OF entry for RZ/G2E SoC
mmc: renesas_sdhi: Add OF entry for RZ/G2N SoC
dt-bindings: mmc: sdhci-msm: Add Eliza compatible
mmc: davinci: fix mmc_add_host order in probe
dt-bindings: mmc: sdhci-msm: Document the Shikra compatible
mmc: sdhci-of-k1: add comprehensive SDR tuning support
mmc: sdhci-of-k1: add regulator and pinctrl voltage switching support
mmc: sdhci-of-k1: enable essential clock infrastructure for SD operation
dt-bindings: mmc: spacemit,sdhci: add pinctrl support for voltage switching
mmc: via-sdmmc: Simplify initialisation of pci_device_id array
mmc: davinci: avoid NULL deref of host->data in IRQ handler
memstick: Constify the driver id_table
mmc: host: Move MODULE_DEVICE_TABLE next to the table itself
mmc: renesas_sdhi: add R-Car M3Le compatibility string
dt-bindings: mmc: renesas,sdhi: Document R-Car M3Le support
...
Pull hwmon updates from Guenter Roeck:
"New drivers for the following chips:
- Analog Devices LTC4283 Swap Controller
- Analog Devices MAX20830
- Analog Devices MAX20860A
- ARCTIC Fan Controller
- Delta E50SN12051
- Luxshare LX1308
- Microchip EMC1812/13/14/15/33
- Monolithic MP2985
- Murata D1U74T PSU
New chip support added to existing drivers:
- asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX
B850-E GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI
- dell-smm: Add Dell Latitude 7530 to fan control whitelist
- nct6683: Support for ASRock Z890 Pro-A
- pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351
- pmbus/max34440: Support for ADPM12250
- pmbus/xdp720: Support for Infineon xdp730, and fix driver issues
reported by Sashiko
New functionality:
- Add support for update_interval_us chip attribute, and support it
in ina238 driver
- Add support for guard() and scoped_guard() for subsystem locks, and
use it in adt7411, ina2xx, and lm90 drivers
- emc2305: Support configurable fan PWM at shutdown
- lm63: Expose PWM frequency and LUT hysteresis as writable
- lm75: Support active-high alert polarity
- nct7802: Add time step attributes for tweaking responsiveness
- pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter,
clear_blackbox, and firmware_revision
- raspberrypi: Fix delayed-work teardown race, add voltage input
support as well as voltage domain IDs
- mcp9982: Add support for reporting external diode faults
Miscellaneous bug fixes, changes and improvements:
- Use named initializers for platform_device_id arrays and
i2c_device_data, and remove unused driver data
- Various drivers: Move MODULE_DEVICE_TABLE next to the table itself
- ads7871: Convert to hwmon_device_register_with_info(), and use
DMA-safe buffer for SPI writes
- adt7411: document supported sysfs attributes
- adt7462: Add of_match_table to support devicetree
- adt7475: Add explicit header include
- coretemp; Fix outdated documentation, coding style issues, and
replace hardcoded core count with dynamic value
- cros_ec: Drop unused assignment of platform_device_id driver data
- emc2305: Fix fan channel index handling
- gpd-fan: Reject EC PWM value 0 as invalid, fix race condition
between device removal and sysfs access, upgrade log level from
warn to err for platform device creation failure, initialize EC
before registering hwmon device, drop global driver data and use
per-device allocation
- htu31: document debugfs serial_number
- ina238: Add support for samples and update_interval
- it87: Clamp negative values to zero in set_fan()
- lm75: Add explicit header include, Add explicit default cases in
lm75_is_visible(), and add section for sysfs interface to
documentation
- pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i
- tmp102: Use device_property_read_string API
- tmp401: Read "ti,n-factor" as signed
- Convert zyxel,nsa320-mcu to DT schema"
* tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (81 commits)
hwmon: tmp401: Read "ti,n-factor" as signed
hwmon: (pmbus/lm25066) Fix PMBus coefficients for LM5064/5066/5066i
hwmon: (gpd-fan) Reject EC PWM value 0 as invalid
hwmon: (dell-smm) Add Dell Latitude 7530 to fan control whitelist
hwmon: temperature: add support for EMC1812
dt-bindings: hwmon: temperature: add support for EMC1812
hwmon: (gpd-fan): fix race condition between device removal and sysfs access
hwmon: (gpd-fan): upgrade log level from warn to err for platform device creation failure
hwmon: (gpd-fan): Initialize EC before registering hwmon device
hwmon: (gpd-fan): drop global driver data and use per-device allocation
hwmon: (pmbus/max34440): add support adpm12250
hwmon: (ina238) Add update_interval_us attribute
hwmon: Add update_interval_us chip attribute
hwmon: (ina238) Add support for samples and update_interval
gpio: gpio-ltc4283: Add support for the LTC4283 Swap Controller
hwmon: ltc4283: Add support for the LTC4283 Swap Controller
dt-bindings: hwmon: Document the LTC4283 Swap Controller
hwmon: (pmbus/xdp720) Fix driver issues xdp720/730
hwmon: (pmbus/xdp720) Add support for efuse xdp730
dt-bindings: hwmon/pmbus: Add Infineon xdp730
...
Pull watchdog updates and fixes from Guenter Roeck:
"Subsystem:
- Unregister PM notifier on watchdog unregister
- Various documentation fixes and improvements
Removed drivers:
- Remove AMD Elan SC520 processor watchdog driver
- Drop SMARC-sAM67 support
- Remove driver for integrated WDT of ZFx86 486-based SoC
New drivers:
- Driver for Andes ATCWDT200
- Driver for Gunyah Watchdog
Added support to existing drivers:
- Add "apple,t8103-wdt" and "apple,t8122-wdt" compatibles to Apple
watchdog driver
- Add rockchip,rk3528-wdt and rockchip,rv1103b-wdt to snps,dw-wdt.yaml
- Document IPQ9650, IPQ5210, Shikra, Nord, and Hawi in qcom-wdt.yaml
Also document sram property and add support to get the bootstatus
to qcom wdt driver
- lenovo_se10_wdt: Fix use-after-rfree and add support for SE10 Gen 2
platform
- ti,rti-wdt: Add ti,am62l-rti-wdt compatible
- renesas: Document RZ/G3L support and rework example for
renesas,r9a09g057-wdt
Other bug fixes and improvements:
- Use named initializers (sc1200, ziirave_wdt)
- Allow pic32-dmt and pic32-wdt to be built with COMPILE_TEST
- realtek-otto: enable clock before using I/O, and prevent PHASE2 underflows
- rti_wdt: Add reaction control
- renesas,rzn1-wdt: Drop interrupt support and other cleanup
- gpio_wdt: Add ACPI support
- imx7ulp_wdt: Keep WDOG running until A55 enters WFI on i.MX94
- sprd_wdt: Remove redundant sprd_wdt_disable() on register failure
- bcm2835_wdt: Switch to new sys-off handler API
- sama5d4_wdt: Fix WDDIS detection on SAM9X60 and SAMA7G5
- hpwdt: Refine hpwdt message for UV platform
- Convert TS-4800 bindings to DT schema
- menz069_wdt: drop unneeded MODULE_ALIAS
- sp5100_tco: Use EFCH MMIO for newer Hygon FCH"
* tag 'watchdog-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (58 commits)
watchdog: sc1200: Drop unused assignment of pnp_device_id driver data
watchdog: unregister PM notifier on watchdog unregister
dt-bindings: watchdog: qcom-wdt: Document IPQ5210 watchdog
watchdog: dev: convert to kernel-doc comments
watchdog: core: clean up some comments
watchdog: uapi: add comments for what bit masks apply to
watchdog: linux/watchdog.h: repair kernel-doc comments
watchdog: add devm_watchdog_register_device() to watchdog-kernel-api
watchdog: ziirave_wdt: Use named initializers for struct i2c_device_id
watchdog: realtek-otto: enable clock before using I/O
watchdog: realtek-otto: prevent PHASE2 underflows
dt-bindings: watchdog: qcom-wdt: Document IPQ9650 watchdog
dt-bindings: watchdog: renesas,rzn1-wdt: interrupts are not required
dt-bindings: watchdog: apple,wdt: Add t8122 compatible
watchdog: apple: Add "apple,t8103-wdt" compatible
watchdog: rzn1: remove now obsolete interrupt support
dt-bindings: watchdog: Add watchdog compatible for RK3528
watchdog: convert the Kconfig dependency on OF_GPIO to OF
watchdog: Remove AMD Elan SC520 processor watchdog driver
watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk
...
Pull spi updates from Mark Brown:
"This has been quite a busy release, mainly due to the subsystem wide
work Johan Hovold has done to modernise resource allocation for the
subsystem on probe, the subsystem did some very clever allocation
management pre devm which didn't quite mesh comfortably with managed
allocations and made it far too easy to introduce error handling and
removal bugs.
- Cleanup and simplification of controller struct allocation, moving
everything over to devm and making the devm APIs more robust, from
Johan Hovold
- Support for spi-mem devices that don't assert chip select and
support for a secondary read command for memory mapped flashes,
some commits for this are shared with mtd.
- Support for SpacemiT K1"
* tag 'spi-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (118 commits)
spi: Fix mismatched DT property access types
spi: xilinx: use FIFO occupancy register to determine buffer size
spi: spi-mem: Fix spi_controller_mem_ops kdoc
spi: xilinx: let transfers timeout in case of no IRQ
spi: dt-bindings: nuvoton,npcm750-fiu: Convert to DT schema
spi: meson-spifc: fix runtime PM leak on remove
spi: Use named initializers for platform_device_id arrays
spi: rzv2h-rspi: Add suspend/resume support
spi: dw-pci: remove redundant pci_free_irq_vectors() calls
spi: ep93xx: fix double-free of zeropage on DMA setup failure
spi: cadence-xspi: Revert COMPILE_TEST support
spi: cadence-xspi: Support 32bit and 64bit slave dma interface
spi: tegra210-quad: Allocate DMA memory for DMA engine
spi: imx: replace dmaengine_terminate_all() with dmaengine_terminate_sync()
spi: fsl-lpspi: terminate the RX channel on TX prepare failure path
spi: fsl-lpspi: replace dmaengine_terminate_all() with dmaengine_terminate_sync()
spi: atmel: fix DMA channel and bounce buffer leaks
spi: omap2-mcspi: Use of_device_get_match_data()
spi: Use named initializers for arrays of i2c_device_data
spi: aspeed: Replace VLA parameter with flat pointer in calibration helper
...
Pull regulator updates from Mark Brown:
"The development of the regulator subsystem continues to be quite
quiet, we've got several new devices, removal of one old device and
some kernel wide cleanup of platform devices but nothing in the core.
- Cleanups of platform_device_id usage
- Filling out and fixing of the description of the MediaTek MT6359
- Removal of the PCAP regulator driver, the MFD has been removed
- New device support for Qualcomm Nord RPMH, PM8109, PM8150 and
PMAU0102, and SG Micro SGM3804"
* tag 'regulator-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
regulator: dt-bindings: mt6311: Convert to DT schema
regulator: qcom_smd-regulator: Add PM8019
regulator: dt-bindings: qcom,smd-rpm-regulator: Add PM8019
regulator: mt6359: Fix vbbck default internal supply name
regulator: bq257xx: drop confusing configuration of_node
regulator: Unify usage of space and comma in platform_device_id arrays
regulator: Use named initializers for platform_device_id arrays
regulator: Drop unused assignment of platform_device_id driver data
regulator: scmi: fix of_node refcount leak in scmi_regulator_probe()
regulator: remove used pcap regulator driver
regulator: add SGM3804 Dual Output driver
regulator: dt-bindings: document the SGM3804 Dual Output regulator
regulator: mt6359: Add proper ldo_vcn33_[12] regulators
regulator: mt6359: Add regulator supply names
regulator: mt6359: const-ify regulator descriptions
regulator: dt-bindings: mt6359: Deprecate bogus vcn33_[12]_* split regulators
regulator: dt-bindings: mt6359: Drop regulator-name pattern restrictions
regulator: palmas: Move MODULE_DEVICE_TABLE next to the table itself
regulator: qcom_smd: Add PM8150 regulators
regulator: dt-bindings: qcom,smd-rpm-regulator: Document PM8150 IC
...
Pull i2c updates from Andi Shyti:
"This pull request is mostly made of cleanups and small infrastructure
improvements across the I2C core, drivers and bindings. It also adds
support for three drivers and a few new compatibles.
Two major cleanup across drivers and core code:
- use named initializers in device ID tables
- replace dev_err() with dev_err_probe()
Drivers:
- at24: use named initializers for arrays of i2c_device_data
- at91: add MCHP_LAN966X_PCI dependency
- cadence: add shutdown callback
- k1: enable by default on SpacemiT
- mxs: improve documentation
- qcom-geni: use pm_runtime_force_suspend/resume for system sleep
- tegra:
- disable fair arbitration on non-MCTP buses
- allocate DMA buffers from the correct DMA device
- designware:
- handle active target shutdown cleanly
- add shutdown callbacks for platform and PCI drivers
- adopt the new PM_RUNTIME_ACQUIRE() helpers
DT bindings:
- convert davinci bindings to DT schema
Core and muxes:
- acpi: report missing I2C resources as -ENOENT
- gpiolib: add gpiod_is_single_ended() helper for I2C GPIO users
- i2c-mux-reg: add generic firmware node support
- a set of 10 patches from Johan Hovold fixing adapter registration
races, cleanup paths and resource management issues
New support:
- DesignWare LECA0003 (ACPI ID)
- Loongson LS2K0300 I2C controller (new driver)
- Qualcomm CCI Glymur and Shikra compatibles"
* tag 'i2c-7.2-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux: (46 commits)
i2c: mxs: add missing kernel-doc for struct mxs_i2c_dev members
i2c: qcom-geni: Use pm_runtime_force_{suspend,resume} helpers
dt-bindings: i2c: qcom-cci: Document Glymur compatible
dt-bindings: i2c: qcom-cci: Document Shikra compatible
i2c: mux: reg: use device property accessors
i2c: acpi: Return -ENOENT when no resources found in i2c_acpi_client_count()
i2c: at91: Add MCHP_LAN966X_PCI dependency
i2c: eg20t: Consistently define pci_device_ids using named initializers
i2c: designware-pcidrv: Consistently define pci_device_ids using named initializers
i2c: bcm-kona: fix spelling mistake in timeout-check comment
i2c: cadence: Add shutdown handler
i2c: tegra: Disable fair arbitration for non-MCTP buses
i2c: tegra: use dmaengine_get_dma_device() for DMA buffer allocation
i2c: busses: make K1 driver default for SpacemiT platforms
i2c: Use named initializers for arrays of i2c_device_data
i2c: core: clean up adapter registration error label
i2c: core: clean up bus id allocation
i2c: core: fix adapter deregistration race
i2c: core: fix adapter registration race
i2c: core: disable runtime PM on adapter registration failure
...
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, one legacy driver removed, a kunit test-suite
for the GPIO core, support for new models in existing drivers and a
slew of various changes in many places though I can't think of
anything controversial that would stand out - it's been a relatively
calm cycle.
GPIO core:
- Add an initial set of kunit test cases for the GPIO subsystem
- Use the devres owner as the GPIO chip's parent in absence of any
other parent
- Fix const-correctness of GPIO chip SRCU guards
- Provide new GPIO consumer interfaces: gpiod_is_single_ended() and
fwnode_gpiod_get()
- Quarantine all legacy GPIO APIs in linux/gpio/legacy.h
- Use __ro_after_init where applicable
New drivers:
- Add driver for the GPIO controller on Waveshare DSI TOUCH panels
Removed drivers:
- Remove the obsolete ts5500 GPIO driver
Driver updates:
- Modernize gpio-timberdale: remove platform data support and use
generic device property accessors
- Extend test build coverage by enabling COMPILE_TEST for more GPIO
drivers
- Add some missing dependencies in Kconfig
- Add support for sparse fixed direction to gpio-regmap
- Remove dead code from gpio-nomadik
- use BIT() in gpio-mxc
- use bitmap_complement() in gpio-xilinx and gpio-pca953x
- Use more appropriate printing functions where applicable
- Use named initializers for platform_device_id and i2c_device_id
arrays
- Convert gpio-altera to using the generic GPIO chip helper library
- Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and
gpio-tegra186
- Unify the naming convention for Qualcomm in GPIO drivers
- Fix interrupt bank mapping to GPIO chips in gpio-mt7621
- Add support for the lines-initial-states property to gpio-74x164
- Switch to using dynamic GPIO base in gpio-ixp4xx
- Move the handling of an OF quirk from ASoC to gpiolib-of.c where
other such quirks live
- Use handle_bad_irq() in gpio-ep93xx
- Some other minor tweaks and refactorings
Devicetree bindings:
- Document the Waveshare GPIO controller for DSI TOUCH panels
- Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in
gpio-zynq
- Add new properties for gpio-dwapb and fairchild,74hc595
- Fix whitespace issues
- Sort compatibles alphabetically in gpio-zynq
Documentation:
- Fix kerneldoc warnings in gpio-realtek-otto
Misc:
- Attach software nodes representing GPIO chips to the actual struct
device objects associated with them in some legacy platforms
enabling real firmware node lookup instead of string matching
- Drop unneeded dependencies on OF_GPIO from bus and staging drivers"
* tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (62 commits)
gpio: nomadik: remove dead DB8540 code from <gpio/gpio-nomadik.h>
gpio: mt7621: fix interrupt banks mapping on gpio chips
bus: ts-nbus: drop unneeded dependency on OF_GPIO
staging: media: max96712: drop unneeded dependency on OF_GPIO
gpiolib: Replace strcpy() with memcpy()
gpio: remove obsolete UAF FIXMEs from lookup paths
gpio: core: fix const-correctness of gpio_chip_guard
gpio: mxc: use BIT() macro
gpio: realtek-otto: fix kernel-doc warnings
gpio: max77620: Unify usage of space and comma in platform_device_id array
gpio: Use named initializers for platform_device_id arrays
gpio: cros-ec: Drop unused assignment of platform_device_id driver data
ARM: omap1: enable real software node lookup of GPIOs on Nokia 770
ARM: omap1: use platform_device_register_full() for GPIO devices on OMAP 16xx
ARM: omap1: drop unused variable from omap16xx_gpio_init()
gpio: gpiolib: use seq_puts() for plain strings
gpio: ts5500: remove obsolete driver
gpio: add kunit test cases for the GPIO subsystem
kunit: provide kunit_platform_device_unregister()
kunit: provide kunit_platform_device_register_full()
...
Pull pwm updates from Uwe Kleine-König:
"The usual mixture of minor fixes, a few cleanups, a new driver and dt
updates for the pwm subsystem.
Thanks to Chen Ni, Devi Priya, Manish Baing, Maurice Hieronymus,
Ronaldo Nunez, Rosen Penev, Shiji Yang and Yixun Lan for the actual
changes and Bjorn Andersson, Conor Dooley, Frank Li, Michal Wilczynski
and Rob Herring for reviews and acks"
* tag 'pwm/for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: th1520: Remove requirement for mul_u64_u64_div_u64_roundup
dt-bindings: pwm: stmpe: Drop legacy binding
pwm: pca9685: Use named initializers for struct i2c_device_id
pwm: pxa: Add optional bus clock
dt-bindings: pwm: marvell,pxa-pwm: Add SpacemiT K3 PWM support
pwm: ipq: Add missing module description
pwm: stm32: Make use of mul_u64_u64_div_u64_roundup()
pwm: Consistently define pci_device_ids using named initializers
pwm: Driver for qualcomm ipq6018 pwm block
pwm: imx27: Fix variable truncation in .apply()
pwm: mediatek: correct mt7628 clock source setting
pwm: mediatek: set mt7628 pwm45_fixup flag to false
pwm: atmel-tcb: Remove unneeded semicolon
According to OPEN Alliance 10BASE-T1x MACPHY Serial Interface (TC6)
specification, interrupt type is active low, level triggered interrupt.
Specification calls for when interrupt level will be asserted and what
condition it is de-asserted. By using edge triggered interrupt, there is a
potential chance to miss it, particularly if it is asserted when interrupt
is disabled.
Level triggered interrupt can't be missed as it gets de-asserted only on
interrupt handler taking actions on interrupting conditions.
Fixes: ac49b950be ("dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260611-level-trigger-v5-4-4533a9e85ce2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull clocksource updates from Thomas Gleixner:
"Updates for clocksource/clockevent drivers:
- Add devm helpers for clocksources, which allows to simplify driver
teardown and probe failure handling.
- More module conversion work
- Update the support for the ARM EL2 virtual timer including the
required ACPI changes.
- Add clockevent and clocksource support for the TI Dual Mode Timer
- Fix the support for multiple watchdog instances in the TEGRA186
driver
- Add D1 timer support to the SUN5I driver
- The usual devicetree updates, cleanups and small fixes all over the
place"
* tag 'timers-clocksource-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (24 commits)
clocksource: move NXP timer selection to drivers/clocksource
clocksource/drivers/timer-tegra186: Reserve and service a kernel watchdog
clocksource/drivers/timer-tegra186: Register all accessible watchdog timers
clocksource/drivers/timer-tegra186: Correct num_wdts for Tegra186 and Tegra234
clocksource/drivers/timer-tegra186: Fix support for multiple watchdog instances
clocksource/drivers/timer-ti-dm: Add clockevent support
clocksource/drivers/timer-ti-dm: Add clocksource support
clocksource/drivers/timer-ti-dm: Fix property name in comment
dt-bindings: timer: arm,arch_timer: Fix requirements for interrupt description
clocksource/drivers/arm_arch_timer: Default to EL2 virtual timer when running VHE
ACPI: GTDT: Parse information related to the EL2 virtual timer
ACPI: GTDT: Account for GTDTv3 size when walking the platform timer descriptors
clocksource: Add devm_clocksource_register_*() helpers
clocksource/drivers/sun5i: Add D1 hstimer support
dt-bindings: timer: allwinner,sun5i-a13-hstimer: add H616 and D1
dt-bindings: timer: Add StarFive JHB100 clint
dt-bindings: timer: renesas,rz-mtu3: document RZ/{T2H,N2H}
dt-bindings: timer: renesas,rz-mtu3: Remove TCIU8 interrupt
dt-bindings: timer: Remove sifive,fine-ctr-bits property
clocksource/drivers/timer-of: Make the code compatible with modules
...
Pull interrupt chip driver updates from Thomas Gleixner:
- Replace the support for the AST2700-A0 early silicon with a proper
driver for the final A2 production silicon
- Rename and rework the StarFive JH8100 interrupt controller for the
new JHB100 SoC as JH8100 was discontinued before production.
- Add support for Amlogic A9 SoCs to the meson-gpio interrupt
controller
- Expand the Econet interrupt controller driver to support MIPS 34Kc
Vectored External Interrupt Controller mode.
- Prevent a NULL pointer dereference in the GICv4 code as the vLPI code
blindly assumes that the ITS was populated. Add the missing sanity
check.
- Add support for software triggered and for error interrupts to the
Renesas RZ/T2H driver.
- Add interrupt redirection support for the loongarch architecture.
- Add multicore support to the Realtek RTL interrupt driver
- The usual updates, enhancements and fixes all over the place
* tag 'irq-drivers-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (32 commits)
irqchip/irq-realtek-rtl: Add multicore support
irqchip/irq-realtek-rtl: Add/simplify register helpers
irqchip/loongarch-ir: Add IR (interrupt redirection) irqchip support
irqchip/loongarch-avec: Return IRQ_SET_MASK_OK_DONE when keep affinity
irqchip/loongarch-avec: Prepare for interrupt redirection support
Docs/LoongArch: Add advanced extended IRQ model
irqchip/qcom-pdc: Use FIELD_GET() to extract bank index and bit position
irqchip/qcom-pdc: Add PDC_VERSION() macro to describe version register fields
irqchip/qcom-pdc: Tighten ioremap clamp to single DRV region size
irqchip/qcom-pdc: Split __pdc_enable_intr() into per-version helpers
irqchip/exynos-combiner: Remove useless spinlock
irqchip/renesas-rzt2h: Add error interrupts support
irqchip/renesas-rzt2h: Add software-triggered interrupts support
irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed
irqchip/gic-v3-its: Use FIELD_MODIFY()
irqchip/econet-en751221: Support MIPS 34Kc VEIC mode
dt-bindings: interrupt-controller: econet: Add CPU interrupt mapping
irqchip/meson-gpio: Add support for Amlogic A9 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A9 SoCs
irqchip/meson-gpio: Use the correct register in meson_s4_gpio_irq_set_type()
...
Pull power management updates from Rafael Wysocki:
"Over a half of the changes here are cpufreq updates that include core
modifications, fixes of the old-style governors, new hardware support
in drivers, assorded driver fixes and cleanups, and the removal of one
driver (AMD Elan SC4*).
Apart from that, the intel_idle driver will now be able to avoid
exposing redundant C-states if PC6 is disabled and there are new
sysctl knobs for device suspend/resume watchdog timeouts, hibernation
gets built-in LZ4 support for image compression and there is the usual
collection of assorted fixes and cleanups.
Specifics:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that
affect cpufreq governors using the common governor code (Zhongqiu
Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the
PCC cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors
printed by the intel_pstate driver and sync policy->cur during CPU
offline in it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep
Kaur, Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init()
to avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during
hibernation image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression
(l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the
intel_rapl power capping driver and use sysfs_emit() in
cpumask_show() in that driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)"
* tag 'pm-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
PM: dpm_watchdog: Add sysctl interface for DPM watchdog timeouts
PM: QoS: Fix misc device registration unwind
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
powercap: intel_rapl: Use sysfs_emit() in cpumask_show()
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
PM: hibernate: Use flexible array for CRC uncompressed buffers
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
PM: hibernate: make LZ4 available for hibernation compression
PM: sleep: Use complete() in device_pm_sleep_init()
opp: rust: mark OPP methods as inline
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
...
Pull thermal control updates from Rafael Wysocki:
"These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
the thermal control core and drivers, clean up code and refactor it in
preparation for future changes:
- Rework the initialization and cleanup of thermal class cooling
devices to separate DT-based cooling device registration and
cooling device registration without DT (Daniel Lezcano, Ovidiu
Panait)
- Update the cooling device DT bindings to support 3-cell cooling
device representation, where the additional cell holds an ID to
select a cooling mechanism for devices that offer multiple cooling
mechanisms, and adjust the cooling device registration code
accordingly (Gaurav Kohli, Daniel Lezcano)
- Remove dead code from two functions in the thermal core and
simplify the unregistration of thermal governors (Rafael Wysocki)
- Fix critical temperature attribute removal handling in the generic
thermal zone hwmon support code and rework that code to register a
separate hwmon class device for each thermal zone (instead of using
one hwmon class device for all thermal zones of the same type) to
address thermal zone removal deadlocks (Rafael Wysocki)
- Use attribute groups for adding temperature attributes to hwmon
class devices associated with thermal zones (Rafael Wysocki)
- Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
Crivellari)
- Fix potential shift overflow in ptc_mmio_write() and improve error
handling in proc_thermal_ptc_add() in the int340x thermal control
driver (Aravind Anilraj)
- Use sysfs_emit() for cpumask printing in the Intel powerclamp
thermal driver (Yury Norov)
- Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
Pandruvada)
- Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
(Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch it to devm cooling device registration version
(Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix atomic temperature read in the QCom tsens driver to comply with
hardware documentation (Priyansh Jain)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)
- Fix typo in a comment in the TSens QCom driver (Jinseok Kim)
- Fix trailing whitespace and repeated word in the OF code, remove
quoted string splitting across lines from the iMX7 driver, and
remove a stray space from the thermal_trip_of_attr() macro
definition (Mayur Kumar)
- Update the thermal testing facility code to avoid NULL pointer
dereferences by rejecting missing command arguments and replace
sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
Panait, Samuel Moelius)"
* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
thermal: sysfs: Replace sscanf() with kstrtoul()
thermal: testing: Replace sscanf() with kstrtoint()
thermal: testing: reject missing command arguments
thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
thermal/of: Support cooling device ID in cooling-spec
thermal/of: Pass cdev_id and introduce devm registration helper
thermal/of: Add cooling device ID support
thermal/of: Rename the devm_thermal_of_cooling_device_register() function
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
thermal/of: Move cooling device OF helpers out of thermal core
hwmon: Use non-OF thermal cooling device registration API
thermal/core: Add devm_thermal_cooling_device_register()
thermal/core: Introduce non-OF thermal_cooling_device_register()
thermal/drivers/samsung: Enable TMU by default
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
thermal/drivers/qoriq: Add i.MX93 tmu support
...
Convert lan9303.txt to yaml format to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dtb: /soc/bus@50000000/i2c@53fec000/switch@a: failed to match any schema with compatible: ['smsc,lan9303-i2c']
Additional changes:
- rename switch-phy to switch in example.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260610150533.515914-1-Frank.Li@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull clocksource/driver updates from Daniel Lezcano:
- Remove the sifive,fine-ctr-bits property bindings because it is a
redundant information (Nick Hu)
- Remove the TCIU8 interrupt bindings on Renesas because it should not
be described as the documentation marked reserved and fix the
conditional reset line for the RZ/{T2H,N2H} (Cosmin Tanislav)
- Add the StarFive JHB100 clint DT bindings compatible string (Ley
Foon Tan)
- Extend schema condition for interrupts to cover D1 compatible
variant an add the D1 hstimer support (Michal Piekos)
- Update the ARM architected timer support to handle the ACPI GTDT v3
format and the EL2 virtual timer, enabling Linux to use the most
appropriate timer when running with VHE, while also fixing several
Device Trees to accurately reflect the underlying hardware (Marc
Zyngier)
- Cleanup and add the clocksource and the clockevent in the TI DM
timer (Markus Schneider-Pargmann)
- Add the multiple watchdogs support in the tegra186 and
tegra234. Dedicate one as a kernel watchdog (Kartik Rajput)
- Add the NXP clocksource selection for the scheduler in the Kconfig
(Enric Balletbo i Serra)
Link: https://lore.kernel.org/all/1e55e8d6-8024-4f17-8620-ab3385465d76@oss.qualcomm.com
The 10G Realtek Otto switches are divided into two series
- Longan: RTL930x up to 28 ports
- Mango : RTL931x up to 56 ports
The Mango based devices have 3 different SoCs RTL9311, RTL9312 and RTL9313.
The MDIO controller of these switches works like the existing RTL930x
logic but has different characteristics and different registers. Add new
compatibles in the device tree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20260610194145.4153668-2-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The YAML conversion added me as maintainer but I can't recall being
asked nor do I want to maintain it. Add Peter as maintainer for the
binding as he is maintainer of the driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Merge cpufreq updates for 7.2:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that affect
cpufreq governors using the common governor code (Zhongqiu Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the PCC
cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors printed
by the intel_pstate driver and sync policy->cur during CPU offline in
it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur,
Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
* pm-cpufreq: (25 commits)
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
cpufreq: clean up dead dependencies on X86 in Kconfig
cpufreq: conservative: Simplify frequency limit handling
cpufreq: Avoid redundant target() calls for unchanged limits
cpufreq: Fix typo in comment
cpufreq: intel_pstate: Sync policy->cur during CPU offline
cpufreq: Documentation: fix sampling_down_factor range
cpufreq: Fix hotplug-suspend race during reboot
cpufreq: pcc: fix use-after-free and double free in _OSC evaluation
...
This is the devicetree schema for Microchip EMC1812/13/14/15/33
Multichannel Low-Voltage Remote Diode Sensor Family. It also
updates the MAINTAINERS file to include the new driver.
EMC1812 has one external remote temperature monitoring channel.
EMC1813 has two external remote temperature monitoring channels.
EMC1814 has three external remote temperature monitoring channels and
channels 2 and 3 support anti parallel diode.
EMC1815 has four external remote temperature monitoring channels and
channels 1/2 and 3/4 support anti parallel diode.
EMC1833 has two external remote temperature monitoring channels and
channels 1 and 2 support anti parallel diode.
Resistance Error Correction is supported on channels 1/2 and 3/4.
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260610-hw_mon-emc1812-v11-1-cef809af5c19@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The LTC4283 is a negative voltage hot swap controller that drives an
external N-channel MOSFET to allow a board to be safely inserted and
removed from a live backplane.
Special note for the "adi,vpower-drns-enable" property. It allows to choose
between the attenuated MOSFET drain voltage or the attenuated input
voltage at the RTNS pin (effectively choosing between input or output
power). This is a system level decision not really intended to change at
runtime and hence is being added as a Firmware property.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260502-ltc4283-support-v13-1-1c206542e652@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Murata D1U74T-W series are hot-pluggable 1U AC/DC front-end
power supplies in the Intel CRPS-185 / OCP M-CRPS form factor.
Each variant delivers a 12 V main output plus a 12 V standby output
from a wide AC input (90-264 Vac) or HVDC supply, and includes an
internal variable-speed cooling fan and on-board voltage, current,
power, fan-speed, and temperature telemetry.
The host-side digital interface is a PMBus 1.2 port on I2C. The
PSU's other electrical signals (status, alert, current-share) live
on the CRPS edge connector and are consumed by the chassis
controller rather than the host SoC, so there are no host-described
supplies, GPIOs, clocks, or interrupts. Add the compatible to
trivial-devices.yaml rather than carrying a standalone binding file.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260514-d1u74t-v4-1-1f1ee7b002ec@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The LM75 alert pin is asserted based on the value of alert polarity bit
of the configuration register. The device/driver default is 0 which means
alert pin is configured to be active-low. A value of 1 maps to inverted
(active-high).
Add an optional boolean property "ti,alert-polarity-active-high" to
override the alert pin polarity. When absent, the default active-low
polarity is kept.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260504151020.462342-2-markus.stockhausen@gmx.de
[groeck: Shorten description line length]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The EMC2305 fan controller supports multiple independent PWM fan
outputs. Some systems require fans to enter a defined safe state
during system shutdown or reboot handoff, until firmware or the next
boot stage reconfigures the controller.
Add an optional "fan-shutdown-percent" property to fan child nodes
allowing the PWM duty cycle applied during shutdown to be configured
per fan output.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260429065955.2113012-3-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull CPUFreq Arm updates for 7.2 from Viresh Kumar:
"- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das, and
Imran Shaik).
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur,
Hans Zhang, Guangshuo Li, and Xueqin Luo)."
* tag 'cpufreq-arm-updates-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
cpufreq: cppc: mask Desired_Excursion when autonomous selection is enabled
cpufreq: qcom-cpufreq-hw: Fix possible double free
cpufreq: apple-soc: Use FIELD_MODIFY()
cpufreq/amd-pstate: Use FIELD_MODIFY()
cpufreq: qcom: Unify user-visible "Qualcomm" name
The Qualcomm Shikra cpufreq hardware is functionally identical to EPSS,
but supports only up to 12 frequency lookup table (LUT) entries. Introduce
Shikra specific bindings to represent this constrained EPSS variant.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
EN7581 and AN7583 SoCs support connecting multiple external SerDes to GDM3
or GDM4 ports via a hw arbiter that manages the traffic in a TDM manner.
As a result multiple net_devices can connect to the same GDM{3,4} port
and there is a theoretical "1:n" relation between GDM ports and
net_devices.
Introduce the ethernet node child of a specific GDM port in order to model
a given net_device that is connected via the external arbiter to the
GDM{3,4} port. This new ethernet node is defined by the "airoha,eth-port"
compatible string. Please note GDM1 and GDM2 does not support the
connection with the external arbiter and they are represented by an
ethernet node defined by the "airoha,eth-mac" compatible string.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-1-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsa.txt has been a redirect to dsa.yaml since commit bce58590d1
("dt-bindings: net: dsa: Add DSA yaml binding") introduced the .yaml
schema. The .yaml has the same filename in the same directory, making
this redirect unnecessary for discoverability.
Two files still reference dsa.txt, forcing readers through an extra
hop to reach the .yaml. The stub has not been touched since August
2020. Update references in lan9303.txt and
Documentation/networking/dsa/dsa.rst to point directly to dsa.yaml
and remove the stub.
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260603-b4-remove-redirect-stubs-v2-3-c8c19876ab64@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
