Pull dmaengine updates from Vinod Koul:
"New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding
- Altera msgdma updates for descriptor management"
* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...
Pull MSI interrupt updates from Thomas Gleixner:
"Switch ARM/ARM64 over to the modern per device MSI domains.
This simplifies the handling of platform MSI and wire to MSI
controllers and removes about 500 lines of legacy code.
Aside of that it paves the way for ARM/ARM64 to utilize the dynamic
allocation of PCI/MSI interrupts and to support the upcoming non
standard IMS (Interrupt Message Store) mechanism on PCIe devices"
* tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/gic-v3-its: Correctly fish out the DID for platform MSI
irqchip/gic-v3-its: Correctly honor the RID remapping
genirq/msi: Move msi_device_data to core
genirq/msi: Remove platform MSI leftovers
irqchip/irq-mvebu-icu: Remove platform MSI leftovers
irqchip/irq-mvebu-sei: Switch to MSI parent
irqchip/mvebu-odmi: Switch to parent MSI
irqchip/mvebu-gicp: Switch to MSI parent
irqchip/irq-mvebu-icu: Prepare for real per device MSI
irqchip/imx-mu-msi: Switch to MSI parent
irqchip/gic-v2m: Switch to device MSI
irqchip/gic_v3_mbi: Switch over to parent domain
genirq/msi: Remove platform_msi_create_device_domain()
irqchip/mbigen: Remove platform_msi_create_device_domain() fallback
irqchip/gic-v3-its: Switch platform MSI to MSI parent
irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI
irqchip/mbigen: Prepare for real per device MSI
irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI
irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]
irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX
...
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
Pull spi updates from Mark Brown:
"There's some quite exciting core work in this release, we've got the
beginnings of support for hardware initiated transfers which is itself
independently useful for optimising fast paths in existing drivers.
We also have a rework of the DMA mapping which allows finer grained
decisions about DMA mapping messages and also helps remove some bodges
that we'd had.
Otherwise it's a fairly quiet release, a few new drivers and features
for existing drivers, together with various cleanups and DT binding
conversions.
One regmap SPI fix made it's way in here too which I should probably
have sent as a regmap fix instead.
Summary:
- Support for pre-optimising messages, reducing the overhead for
messages that are repeatedly used (eg, reading the interrupt status
from a device). This will also be used for hardware initiated
transfers in future.
- A reworking of how DMA mapping is done, introducing a new helper
and allowing the DMA mapping decision to be done per transfer
instead of per message.
- Support for Atmel SAMA7D64, Freescale LX2160A DSPI and WCH CH341A"
* tag 'spi-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (72 commits)
spi: dt-bindings: at91: Add sama7d65 compatible string
spi: add ch341a usb2spi driver
spi: dt-bindings: fsl-dspi: add compatible string 'fsl,lx2160a-dspi'
spi: dt-bindings: fsl-dspi: add dmas and dma-names properties
spi: spi: Remove unnecessary ‘0’ values from status
spi: spi: Remove unnecessary ‘0’ values from rc
spi: xcomm: fix coding style
spi: xcomm: remove i2c_set_clientdata()
spi: xcomm: make use of devm_spi_alloc_host()
spi: xcomm: add gpiochip support
spi: dt-bindings: snps,dw-apb-ssi.yaml: update compatible property
spi: dt-bindings: fsl-dspi: Convert to yaml format
spi: fsl-dspi: use common proptery 'spi-cs-setup(hold)-delay-ns'
spi: axi-spi-engine: remove platform_set_drvdata()
spi: spi-fsl-lpspi: Pass pm_ptr()
spi: spi-imx: Pass pm_ptr()
spi: spi-fsl-lpspi: Switch to SYSTEM_SLEEP_PM_OPS()
spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
spi: add devm_spi_optimize_message() helper
...
Pull regmap updates from Mark Brown:
"There's one new feature here, a regmap_multi_reg_read() matching the
existing write function which has some IIO users coming.
This allows atomic reads from multiple registers without the need to
wrap a higher level lock in the client driver just for regmap (which
already has locks anyway).
We also have one fix for the KUnit tests, and a bunch of cleanups"
* tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add test cases for regmap_multi_reg_(read,write}()
regmap: Implement regmap_multi_reg_read()
regmap-irq: handle const struct regmap_irq_sub_irq_map
const_structs.checkpatch: add regmap structs
regmap: add missing MODULE_DESCRIPTION() macros
regmap-i2c: add missing MODULE_DESCRIPTION() macro
regmap: kunit: Use array_size() and sizeof(*ptr) consistently
regmap: maple: Switch to use kmemdup_array()
regmap: cache: Switch to use kmemdup_array()
regmap: cache: Use correct type of the rb_for_each() parameter
regmap: Switch to use kmemdup_array()
regmap: kunit: add missing MODULE_DESCRIPTION()
regmap: kunit: Fix memory leaks in gen_regmap() and gen_raw_regmap()
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
Saeed Mahameed says:
====================
aux-sysfs-irqs
Shay Says:
==========
Introduce auxiliary bus IRQs sysfs
Today, PCI PFs and VFs, which are anchored on the PCI bus, display their
IRQ information in the <pci_device>/msi_irqs/<irq_num> sysfs files. PCI
subfunctions (SFs) are similar to PFs and VFs and these SFs are anchored
on the auxiliary bus. However, these PCI SFs lack such IRQ information
on the auxiliary bus, leaving users without visibility into which IRQs
are used by the SFs. This absence makes it impossible to debug
situations and to understand the source of interrupts/SFs for
performance tuning and debug.
Additionally, the SFs are multifunctional devices supporting RDMA,
network devices, clocks, and more, similar to their peer PCI PFs and
VFs. Therefore, it is desirable to have SFs' IRQ information available
at the bus/device level.
To overcome the above limitations, this short series extends the
auxiliary bus to display IRQ information in sysfs, similar to that of
PFs and VFs.
It adds an 'irqs' directory under the auxiliary device and includes an
<irq_num> sysfs file within it.
For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50 51 52 53 54 55 56 57 58
Patch summary:
patch-1 adds auxiliary bus to support irqs used by auxiliary device
patch-2 mlx5 driver using exposing irqs for PCI SF devices via auxiliary
bus
==========
* tag 'aux-sysfs-irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose SFs IRQs
driver core: auxiliary bus: show auxiliary device IRQs
RDMA/mlx5: Add Qcounters req_transport_retries_exceeded/req_rnr_retries_exceeded
net/mlx5: Reimplement write combining test
====================
Link: https://patch.msgid.link/20240711213140.256997-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PCI subfunctions (SF) are anchored on the auxiliary bus. PCI physical
and virtual functions are anchored on the PCI bus. The irq information
of each such function is visible to users via sysfs directory "msi_irqs"
containing files for each irq entry. However, for PCI SFs such
information is unavailable. Due to this users have no visibility on IRQs
used by the SFs.
Secondly, an SF can be multi function device supporting rdma, netdevice
and more. Without irq information at the bus level, the user is unable
to view or use the affinity of the SF IRQs.
Hence to match to the equivalent PCI PFs and VFs, add "irqs" directory,
for supporting auxiliary devices, containing file for each irq entry.
For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50 51 52 53 54 55 56 57 58
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
v9-v10:
- remove Przemek RB
- add name field to auxiliary_irq_info (Greg and Przemek)
- handle bogus IRQ in auxiliary_device_sysfs_irq_remove (Greg)
v8-v9:
- add Przemek RB
- use guard() in auxiliary_irq_dir_prepare (Paolo)
v7-v8:
- use cleanup.h for info and name fields (Greg)
- correct error flow in auxiliary_irq_dir_prepare (Przemek)
- add documentation for new fields of auxiliary_device (Simon)
v6-v7:
- dynamically creating irqs directory when first irq file created (Greg)
- removed irqs flag and simplified the dev_add() API (Greg)
- move sysfs related new code to a new auxiliary_sysfs.c file (Greg)
v5-v6:
- removed concept of shared and exclusive and hence global xarray (Greg)
v4-v5:
- restore global mutex and replace refcount_t with simple integer (Greg)
v3->4:
- remove global mutex (Przemek)
v2->v3:
- fix function declaration in case SYSFS isn't defined
v1->v2:
- move #ifdefs from drivers/base/auxiliary.c to
include/linux/auxiliary_bus.h (Greg)
- use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL (Greg)
- Fix kzalloc(ref) to kzalloc(*ref) (Simon)
- Add return description in auxiliary_device_sysfs_irq_add() kdoc (Simon)
- Fix auxiliary_irq_mode_show doc (kernel test boot)
Merge series from Guenter Roeck <linux@roeck-us.net>:
regmap_multi_reg_read() is similar to regmap_bilk_read() but reads from
an array of non-sequential registers. It is helpful if multiple non-
sequential registers need to be read in a single operation which would
otherwise have to be mutex protected.
The name of the new function was chosen to match the existing function
regmap_multi_reg_write().
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The 'offline' file in sysfs shows all offline CPUs, including those
that aren't present. User-space is expected to remove not-present CPUs
from this list to learn which CPUs could be brought online.
CPUs can be present but not-enabled. These CPUs can't be brought online
until the firmware policy changes, which comes with an ACPI notification
that will register the CPUs.
With only the offline and present files, user-space is unable to
determine which CPUs it can try to bring online. Add a new CPU mask
that shows this based on all the registered CPUs.
Signed-off-by: James Morse <james.morse@arm.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-20-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-ac97.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-ram.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-raw-ram.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-slimbus.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-spmi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-w1.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-sccb.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-spi-avmm.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240603-md-base-regmap-v1-1-ff7a2e5f990f@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from David Lechner <dlechner@baylibre.com>:
In the IIO subsystem, we are finding that it is common to call
spi_optimize_message() during driver probe since the SPI message
doesn't change for the lifetime of the driver. This patch adds a
devm_spi_optimize_message() helper to simplify this common pattern.
Add function to set a custom coredump timeout.
For Xe driver usage, current 5 minutes timeout may be too short for
users to search and understand what needs to be done to capture
coredump to report bugs.
We have plans to automate(distribute a udev script) it but at the end
will be up to distros and users to pack it so having a option to
increase the timeout is a safer option.
v2:
- replace dev_coredump_timeout_set() by dev_coredumpm_timeout() (Mukesh)
v3:
- make dev_coredumpm() static inline (Johannes)
v5:
- rename DEVCOREDUMP_TIMEOUT -> DEVCD_TIMEOUT to avoid redefinition
in include/net/bluetooth/coredump.h
v6:
- fix definition of dev_coredumpm_timeout() when CONFIG_DEV_COREDUMP
is disabled
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611174716.72660-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
Replace open coded kmemdup_array(), which does an additional
overflow check.
While at it, fix one minor issue in regcache.c.
If we ever meet a hardware that uses weird register bits and padding,
we may end up in off-by-one error since x/8 + y/8 might not be equal
to (x + y)/8 in some cases.
bits pad x/8+y/8 (x+y)/8
4..7 0..3 0 0 // x + y from 4 up to 7
4..7 4..7 0 1 // x + y from 8 up to 11
4..7 8..11 1 1 // x + y from 12 up to 15
8..15 0..7 1 1 // x + y from 8 up to 15
8..15 8..15 2 2 // x + y from 16 up to 23
Fix this by using (x+y)/8.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://msgid.link/r/20240605205315.19132-1-andy.shevchenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Synchronize the dev->driver usage in really_probe() and dev_uevent().
These can run in different threads, what can result in the following
race condition for dev->driver uninitialization:
Thread #1:
==========
really_probe() {
...
probe_failed:
...
device_unbind_cleanup(dev) {
...
dev->driver = NULL; // <= Failed probe sets dev->driver to NULL
...
}
...
}
Thread #2:
==========
dev_uevent() {
...
if (dev->driver)
// If dev->driver is NULLed from really_probe() from here on,
// after above check, the system crashes
add_uevent_var(env, "DRIVER=%s", dev->driver->name);
...
}
really_probe() holds the lock, already. So nothing needs to be done
there. dev_uevent() is called with lock held, often, too. But not
always. What implies that we can't add any locking in dev_uevent()
itself. So fix this race by adding the lock to the non-protected
path. This is the path where above race is observed:
dev_uevent+0x235/0x380
uevent_show+0x10c/0x1f0 <= Add lock here
dev_attr_show+0x3a/0xa0
sysfs_kf_seq_show+0x17c/0x250
kernfs_seq_show+0x7c/0x90
seq_read_iter+0x2d7/0x940
kernfs_fop_read_iter+0xc6/0x310
vfs_read+0x5bc/0x6b0
ksys_read+0xeb/0x1b0
__x64_sys_read+0x42/0x50
x64_sys_call+0x27ad/0x2d30
do_syscall_64+0xcd/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Similar cases are reported by syzkaller in
https://syzkaller.appspot.com/bug?extid=ffa8143439596313a85a
But these are regarding the *initialization* of dev->driver
dev->driver = drv;
As this switches dev->driver to non-NULL these reports can be considered
to be false-positives (which should be "fixed" by this commit, as well,
though).
The same issue was reported and tried to be fixed back in 2015 in
https://lore.kernel.org/lkml/1421259054-2574-1-git-send-email-a.sangwan@samsung.com/
already.
Fixes: 239378f16a ("Driver core: add uevent vars for devices of a class")
Cc: stable <stable@kernel.org>
Cc: syzbot+ffa8143439596313a85a@syzkaller.appspotmail.com
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20240513050634.3964461-1-dirk.behme@de.bosch.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Use kunit_kcalloc() to allocate the defaults table so that it will be
freed when the test case ends.
- kfree() the buf and *data buffers on the error paths.
- Use kunit_add_action_or_reset() instead of kunit_add_action() so that
if it fails it will call regmap_exit().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240411103724.54063-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, when an adapter defines a max_write_len quirk,
the data will be chunked into data sizes equal to the
max_write_len quirk value. But the payload will be increased by
the size of the register address before transmission. The
resulting value always ends up larger than the limit set
by the quirk.
Avoid this error by setting regmap's max_write to the quirk's
max_write_len minus the number of bytes for the register and
padding. This allows the chunking to work correctly for this
limited case without impacting other use-cases.
Signed-off-by: Jim Wylder <jwylder@google.com>
Link: https://msgid.link/r/20240523211437.2839942-1-jwylder@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull regmap fix from Mark Brown:
"Guenter ran with memory sanitisers and found an issue in the new KUnit
tests that Richard added where an assumption in older test code was
exposed, this was fixed quickly by Richard"
* tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Fix array overflow in stride() test
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
Pull driver core updates from Greg KH:
"Here is the small set of driver core and kernfs changes for 6.10-rc1.
Nothing major here at all, just a small set of changes for some driver
core apis, and minor fixups. Included in here are:
- sysfs_bin_attr_simple_read() helper added and used
- device_show_string() helper added and used
All usages of these were acked by the various maintainers. Also in
here are:
- kernfs minor cleanup
- removed unused functions
- typo fix in documentation
- pay attention to sysfs_create_link() failures in module.c finally
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Fix a typo in the description of device_get_child_node_count()
kernfs: mount: Remove unnecessary ‘NULL’ values from knparent
scsi: Use device_show_string() helper for sysfs attributes
platform/x86: Use device_show_string() helper for sysfs attributes
perf: Use device_show_string() helper for sysfs attributes
IB/qib: Use device_show_string() helper for sysfs attributes
hwmon: Use device_show_string() helper for sysfs attributes
driver core: Add device_show_string() helper for sysfs attributes
treewide: Use sysfs_bin_attr_simple_read() helper
sysfs: Add sysfs_bin_attr_simple_read() helper
module: don't ignore sysfs_create_link() failures
driver core: Remove unused platform_notify, platform_notify_remove
Force the max_register of the test regmap to be one register longer
than the number of test registers, to prevent an array overflow in
the test loop.
The test defines num_reg_defaults = 6. With 6 registers and
stride == 2 the valid register addresses would be 0, 2, 4, 6, 8, 10.
However the loop checks attempting to access the odd address, so on
the final register it accesses address 11, and it writes entry [11]
of the read/written arrays.
Originally this worked because the max_register of the regmap was
hardcoded to be BLOCK_TEST_SIZE (== 12).
commit 710915743d ("regmap: kunit: Run sparse cache tests at non-zero
register addresses")
introduced the ability to start the test address range from any address,
which means adjusting the max_register. If max_register was not forced,
it was calculated either from num_reg_defaults or BLOCK_TEST_SIZE. This
correctly calculated that with num_reg_defaults == 6 and stride == 2 the
final valid address is 10. So the read/written arrays are allocated to
contain entries [0..10]. When stride attempted to access [11] it was
overflowing the array.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 710915743d ("regmap: kunit: Run sparse cache tests at non-zero register addresses")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://msgid.link/r/20240517144703.1200995-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
Pull regmap updates from Mark Brown:
"Other than a few cleanups the changes here are all in the KUnit tests,
Richard Fitzgerald sent some bug fixes during the v6.9 cycle and while
adding test coverage for the issues fixed did some fairly substantial
improvements, both cleaning up the framework and building out the
coverage"
* tag 'regmap-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Reorder fields in 'struct regmap_config' to save some memory
regmap: kunit: Fix an NULL vs IS_ERR() check
regmap: spi: Add missing MODULE_DESCRIPTION()
regmap: Drop capitalisation in MODULE_DESCRIPTION()
regmap: kunit: Add test cases for regmap_read_bypassed()
regmap: kunit: Add cache-drop test with multiple cache blocks
regmap: kunit: Replace a kmalloc/kfree() pair with KUnit-managed alloc
regmap: kunit: Use a KUnit action to call regmap_exit()
regmap: kunit: Add more cache-sync tests
regmap: kunit: Add more cache-drop tests
regmap: kunit: Run non-sparse cache tests at non-zero register addresses
regmap: kunit: Run sparse cache tests at non-zero register addresses
regmap: kunit: Introduce struct for test case parameters
regmap: kunit: Create a struct device for the regmap
regmap: kunit: Fix warnings of implicit casts to __le16 and __be16
regmap: maple: Remove second semicolon
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
Merge cpuidle updates, changes related to system sleep and power capping
updates for 6.10:
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li).
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt).
- Use %ps to simplify debug output in the core system-wide suspend and
resume code (Len Brown).
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole).
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
- Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
Rui).
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
* pm-cpuidle:
cpuidle: ladder: fix ladder_do_selection() kernel-doc
cpuidle: kirkwood: Convert to platform remove callback returning void
* pm-sleep:
PM: hibernate: replace deprecated strncpy() with strscpy()
PM: sleep: Take advantage of %ps to simplify debug output
PM: wakeup: Remove unnecessary else from device_init_wakeup()
PM: wakeup: make device_wakeup_disable() return void
* pm-powercap:
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
powercap: intel_rapl: Sort header files
powercap: intel_rapl: Add support for ArrowLake-H platform
powercap: DTPM: Avoid explicit cpumask allocation on stack
